Used Turret Punching Machine for sale (91,433)

Condition: excellent (used), Year of construction: 1996, total height: 3,800 mm, ram adjustment: 100 mm, total width: 2,300 mm, total length: 4,000 mm, table length: 1,250 mm, table width: 900 mm, Decoiler DREHER Type 2370 BFPS YOP 1996   Straightning DREHER KMV 400 YOP 1996 Capacity Kg: 125000 Table Length: 1250mm Table Width: 900mm Ram adjustment: 100mm Lajdpeuql Ulofx Ab Ush Strokes: 30 - 180Min. Length: 4000mm Width: 2300mm Height: 3800mm Weight: 23080kg

Condition: excellent (used), METALLKRAFT Profile Steel Shear / Punch HPS 65 DS Combined Hydraulic Profile Steel Shear and Punch with Punching Station, Notching Station, and Flat Steel, Angle Steel, and Profile Steel Shear – enables simultaneous operation at punching and profile steel shear. Punching Station - Punching Force: 65 t - Punching Capacity: max. Ø 26 x 20 / Ø 57 x 10 mm* - Throat Depth: 305 mm - Stroke Length: max. 55 mm - Number of Strokes: 25 strokes/min - Working Height: 900 mm Rod Steel Shear - Cutting Capacity Round: max. Ø 45 mm* - Cutting Capacity Square: max. 45 x 45 mm* Angle Steel Shear - Cutting Capacity L-Profile 90°: 120 x 120 x 12 mm* - Cutting Capacity L-Profile 45°: 70 x 10 mm* - Cutting Capacity U/I Profile: 120 x 58 mm - Cutting Capacity T-Profile: 90 x 11 mm - Working Height: 1,140 mm Flat Steel Shear - Cutting Capacity 90°: max. 300 x 20 / 375 x 15 mm* - Miter Cut 45°: max. FL 100 x 15 mm* - Blade Length: 380 mm - Working Height: 900 mm Notching Station - Material Thickness: max. 10 mm* - Notching Width: max. 45 mm - Notching Depth: max. 90 mm - Notching Station: 100 x 100 x 10 mm Machine Data - Motor Power: 5.5 kW | 400 V - 50 Hz - Dimensions (LxWxH): 1700 x 950 x 1880 mm - Weight (net): approx. 1,600 kg Shipping on pallet via freight forwarder possible Europe-wide. Additional machines available! Take a look at our listings. If you have any questions, feel free to contact us by message or phone: Maschinenhandel Nord Gerstenstraße 2 17034 Neubrandenburg Lasdpexizanjfx Ab Uoh

Condition: excellent (used), Year of construction: 2020, operating hours: 20,000 h, functionality: fully functional, machine/vehicle number: KDH 1600, total height: 4,200 mm, feed length X-axis: 300 mm, ram adjustment: 120 mm, installation height: 751 mm, table height: 200 mm, total width: 2,200 mm, total length: 1,600 mm, drop-through hole in table: 250 mm, table length: 1,400 mm, table width: 1,000 mm, conveyor belt width: 400 mm, pressing force: 160 t, control cabinet height: 2,500 mm, control cabinet length: 5,000 mm, control cabinet width: 600 mm, type of input current: AC, stroke length: 110 mm, stroke adjustment: 100 mm, clearance between the columns: 1,500 mm, working width: 300 mm, input voltage: 400 V, distance between side stands: 600 mm, distance between stands: 1,500 mm, overall weight: 22,000 kg, control voltage: 24 V, product height (max.): 5 mm, year of last overhaul: 2024, pressure: 6 bar, sheet thickness steel (max.): 5 mm, compressed air connection: 6 bar, height adjustment type: hydraulic, punching force: 160 t, space requirement height: 4,200 mm, space requirement length: 13,000 mm, space requirement width: 2,500 mm, sheet thickness aluminum (max.): 5 mm, Press force: 1600 kN (at 60 strokes/min) Table size: 1500 x 1100 mm (W x D) Clamping area (table): 1400 x 1000 mm Clamping area (ram): 1400 x 1000 mm Installation height: 751 mm (stroke at bottom, adjustment at top) Stroke rate: 20–120 strokes/min, infinitely variable Stroke: 8–110 mm, automatically adjustable Ram adjustment: 120 mm (motorized) Features: - Equipped with servo technology, programmable ram speed - Table clamping plates are split and manually movable - 8-way slide guide - Motorized central oil lubrication - Automatic ram adjustment - Pneumatic ram weight compensation - Hydraulic stroke adjustment - Siemens S7 control system - Visualization via Siemens panel PC - Tool protection for 6 tools - Tool data storage (1000 entries) - 2-channel press force measurement - Hydraulic overload protection - T-slots in table and ram - Longitudinal groove for tool centering in the ram - Vibration-damping machine feet - Split table with 3 adjustable scrap bridges - Various 400V and 220V sockets configurable via the control (e.g. for conveyor belt) - 2 cams for rotary table - Feed adjustable electrically 120–275 mm - Strip lubricator adjustable via control - ERP connection/data transmission possible via LAN cable - The press is currently at the manufacturer’s site and will be retrofitted with an intermediate gearbox (if desired) Feed: - Rollers: 120 mm - Width: 400 mm - Length: unlimited - Pneumatic intermediate ventilation Laedpfx Abjxiwzhj Ueh Strip lubricator by Raziol 400 x 80 mm, various rollers (frequency, quantity, and medium 1 or 2), control via S7 (on request, not included) Decoiler/Straightener (on request, not included): - Max. 5 tons - Outer diameter 1800 mm - Inner diameter 508 mm - Width: 400 mm - 7 rollers 90 mm with supports (Alligator 200 mm) - Controllable via S7

Condition: ready for operation (used), Punching machine, hole punch, blanking press, eccentric press, Used machine Manufacturer: Haulick + Roos Werkzeugmaschinen GmbH, Pforzheim, Germany Type: RVD 32-540 HS Serial number: 1201847 Year of manufacture: 1985 Pressing force: 320 kN (≈ 32 tons) Stroke rate (speed range): 30 – 1200 strokes/min Drive (motor power): ~18 kW Lsdjxdxbxopfx Ab Uoah Stroke length: 0 – 40 mm Ram adjustment: 0 – 50 mm Centre hole in ram: Ø 52 mm This is a high-speed eccentric press (HS = High Speed), suitable for pressing thin sheet metal in mass production, for example in the electronics or automotive industries for small components.

Condition: new, Year of construction: 2025, PUNCHING MACHINE Model; MAGRAF EP-50cm or EP-70cm Laedpfx Abobyfu Ns Ujh Interchangeble tools for punching,scoring.perforating Maximum punching lengts 500,700mm Power 1,1 kW

Condition: ready for operation (used), Year of construction: 1976, Pressing force: 20 t Table size: 340 x 320 mm (W x D) Ram size: 160 x 230 mm with wedge plate Table opening: 70 x 180 mm Stroke rate: max. 150 strokes/min, infinitely adjustable via PIV gearbox Stroke: 10...50 mm Ram adjustment: 50 mm Equipped with: • Swiveling extension plate for feed • Motorized central oil lubrication Laodpfxjxg Rvao Ab Uoh • Slide guide with V-prisms • Machine body made of cast iron • PIV gearbox for stroke rate control • Free-standing control panel • 3 cams for feed, etc. • Manual setup via hand lever • Forward and reverse operation • No documentation or electrical diagrams available Optionally, we can offer a pneumatic feed for the press.

Condition: good (used), Year of construction: 1972, functionality: fully functional, pressing force: 25 t, space requirement height: 2,800 mm, space requirement length: 1,600 mm, space requirement width: 2,200 mm, Four-column punching press Manufacturer: Hermann Raster KG Type: HR SL4S Working area Laodpfx Aswcxccob Ueh Distance from ram center or distance between the columns under the guide: 160 mm Smallest / largest distance from clamping table to ram at maximum stroke: 260 / 300 mm Smallest / largest distance from clamping table to ram guide: 110 / 150 mm Clamping table Clamping area: 600 x 320 mm Clamping ram Smallest / largest stroke: 0 / 40 mm Ejector stroke (max. 20 mm) Stroke rate: 200-1000 per minute Straightening range: 70 mm Clamping area: 400 x 250 mm Clamping pin: Hole diameter: 40 mm; Depth 70 mm Safety device Electro-pneumatic clutch and spring-loaded brake Power Normal pressure 25,000 kp Cutting capacity 625 mm², K=40 kg/mm² Floor area required without soundproofing 1 m x 1 m x 2.45 m Weight without soundproofing 3,600 kg Floor area required with soundproofing 1.60 m x 2.20 m x 2.80 m Drive type Voltage 380-660 V Current type: Three-phase current Total power requirement 6 kW Drive: AEG, AM 132 MX4, power 7.5 kW, 2860 rpm Gearbox: PIV, FK NA HB 22 Control cabinet: AEG, 190300 Central lubrication: Woerner, PA 15.M1 Flat/V-belt 3, 17 x 2220, rubber material Drive: Variable speed drive Pull width: 65 mm Pull diameter: 224 mm Special features Gripper feed Z2 Useful width: 180 mm Soundproof cabinet sta Schalltechnische Anlagen GmbH The machine is connected to the power supply and can be tested.

Year of construction: 1966, condition: used, functionality: fully functional, machine/vehicle number: 562-66280, Hydraulic bridge punching cq cutting machine with forward and backward moving upper platen. Working area 600 x 2000 mm. Max oil pressure per cylinder 400 bar with a diameter of 185mm = 107 tons per hydraulic cylinder Guaranteed pressure force regardless of load location 100 tons Dimensions of the machine 320 x 170 x 190 cm Ledpfx Absud Rhve Uoah Weight 4,500 kg Machine is without oil; which has been drained upon removal All electrical documentation is complete; even warranty certificates for the Sick photocells from 1970 !

Condition: ready for operation (used), PEDDINGHAUS FLAT, PROFILE AND BAR STEEL SHEAR WITH NOTCHER AND PUNCH TYPE: 210 AD/13 MACHINE NO.: GJ 3730 YEAR OF MANUFACTURE: 1970 Equipment: various punch tools and dies (see photo) standard accessories operating tools 2 foot switches for single/continuous stroke documentation Condition: workshop-tested, functional Lajdpexc Ep Tofx Ab Ujh

Condition: new, neu ca. 12 - 14 Wochen ab Auf Türkei 209800 € 3896.66 € 20 to 2000x1250 mm 2000 mm 1250 mm 90 m/Min 70 m/Min 114 m/Min 1100 1/Min 375 1/Min 1200 1/Min 6 mm 3 mm 3 mm 1.5 mm 27 0,1 mm 0,05 mm 30 U/Min 150 U/Min 100 kg 940 mm 6 bar 88.9 mm 7.5 kW 5600 mm 6600 mm 4200 mm 6200 mm 2310 mm 11000 kg Control unit, Siemens Sinumerik 840 D SL CAD-CAM software Programming on the control panel Remote diagnostic function Automatic clamp positioning Network Ethernet communication Automatic tool lubrication UPS for control panel Movable scrap box Brush table Oil Cooler Lodpowirpcefx Ab Ujah USB Driver Command pedal Web cam for service Reposition on X axis Alignment Tools for Index Stations C+B Station Manual nesting turret (27 stations without tool and holder): 11 x A-Station fix: 0,8-12,7 mm 10 x B-Station fix: 12,8 - 31,7 mm 2 x B-Station Index: 12,8 - 31,7 mm 1 x C-Station fix: 31,8 - 50,8 mm 1 x C-Station Index: 31,8 - 50,8 mm 2 x D-Station fix: 50,9 - 88,9 mm Infra-red light barriers according to CE rules

Condition: used, Pneumatic Single-Column Press RECTUS - FRIEDMANN & MAIER Type K3000 / 50 / 6A Air-Powered Press Serial No. 3437 Year of manufacture: approx. 1990 Press force: 3.0 tons at 6 bar Press force: 2.6 tons at 5 bar Press force: 2.2 tons at 4 bar Press force: 1.6 tons at 3 bar Press force: 1.0 ton at 2 bar Throat depth: 150 mm Power stroke: 6 mm Pre-stroke: 50 mm Total stroke: 56 mm Ram surface: Ø 100 mm Tool mount: Ø 12 mm Installation height: max. 180 mm Table area: 200 x 200 mm Compressed air requirement: max. 6 bar Lsdpfx Aew A Srwob Ujah - Pneumatic power cylinder with mechanical power amplifier (wedge-lever principle) - Press cylinder height adjustable on the frame via threaded spindle (50 mm) - Without pneumatic control system - Throttle valve for stroke speed adjustment Required space (L x W x H): 440 x 230 x 750 mm Weight: 127 kg Good condition 2 units available, price per unit

Condition: excellent (used), Year of construction: 2007, Pressing force: 2,000 kN Table size: 2,300 x 1,100 mm (W x D) Pass-through opening: 2 pcs. 700 x 300 mm Distance between uprights: 2,460 mm Ram clamping area: 2,300 x 1,100 mm Lateral clearance: 740 mm Die height: 550 mm (ram down, adjustment up) Stroke rate: 30 - 140 strokes/min, steplessly adjustable Ljdpfx Abov T Anlo Ueah Stroke: 20...220 mm Ram adjustment: 150 mm (motorized) Main drive: 30 kW Weight: approx. 27,500 kg Features: • Siemens + Beckhoff control • 8-fold slide guide • Motorized oil circulation lubrication • Automatic ram adjustment • Hydraulic overload protection • Pneumatic ram counterbalance • Electromechanical stroke adjustment • Siemens + Beckhoff control system • Beckhoff panel visualization • T-slots in table and ram (28 mm, spacing 300 mm) • Vibration-damping machine feet • 4 pcs. tool safeties + 4 pcs. cam outputs • Ram with 20 mm wide central slot • Hydraulic tool clamping on table and ram • Hydraulic roll blocks for tool change Coil line by Kemmerich, consisting of: Decoiler Type: V 5000 A – SH – 600 - S Load capacity: 5,000 kg Coil width: 100 - 600 mm Expansion range: 470 – 520 mm Coil outside diameter: 2,000 mm • Motorized auxiliary drive • Pneumatic disc brake • Hydraulic expansion by wedge segments • Rear support disc and 3 attachable limiting arms at front • Hydraulically actuated and driven hold-down roller, laterally adjustable by handwheel • Load carriage (stationary, decoiler moves hydraulically), lifting height 770 mm with 4 limiting bars Straightening machine Type: RMBMZ 50.600 UF Coil width: 40 - 600 mm Coil thickness: 0.5 – 4.0 mm Max. cross-section: 1,200 mm² Number of rollers: 9 pcs. Roller diameter: 50 mm Number of feed rollers: 2 pcs. Feed roller diameter: 100 mm Speed: 3 - 25 m/min Features: • Rollers hardened, ground and hard chromed • Drive of lower straightening rollers and feed rollers via gear transmission • Motorized roller frame adjustment, precision 1/100 mm, settings storable • Upper rollers ventable by 100 mm • Feed roller pneumatically ventable • Lateral strip guidance at entry with handwheel and leadscrew • Outlet roller basket and loop bridge • Loop control via ultrasonic sensor • Hydraulic introduction aid, consisting of table with extendable tongue and upper bending roller Roll feed Coil width: max. 600 mm Features: • Rollers hardened, ground, and chromed • Driven by gear motor • Upper roller hydraulically ventable • Height adjustment hydraulic • Lateral strip guidance at entry with handwheel • Roller basket Additional features: • Pneumatically swiveling loop bridge between straightener and feeder • Safety fence around the entire line • Decoiler and straightener on common base frame • Various spare rollers for straightener The complete line can still be inspected under power at the current owner's site!

Condition: ready for operation (used), KINGSLAND PUNCHING MACHINE MODEL: 55P625 Complete with various punches Lasdexfvtzopfx Ab Ush

Condition: refurbished (used), Year of construction: 1986, functionality: fully functional, machine/vehicle number: 86053, total width: 1,950 mm, total length: 4,000 mm, total height: 1,800 mm, overall weight: 7,500 kg, type of input current: three-phase, input voltage: 380 V, working range: 48 mm, power: 9.56 kW (13.00 HP), control voltage: 24 V, paper weight (min.): 80 g/m², paper weight (max.): 2,000 g/m², paper width (min.): 350 mm, paper width (max.): 910 mm, paper height (min.): 290 mm, paper height (max.): 670 mm, Equipment: documentation/manual, lighting, Refurbished high quality flatbed die cutting machine from Italy with Spiess insert with steel insert plate with lateral adjustment, a left and right pull attachment (Spiess), double sheet detection, moving upper platen (WUPA system or Kama) with central pressure adjustment as with KAMA, but with the conventional intermittent pull gripper bar system with closing upper grippers. In other words: the sheet moves almost in a straight path through the machine; that is why this machine is ideally suited for lighter paper and cardboard types and is definitely an excellent intermediate step between a Heidelberg SBD and a medium format 40" die-cutting machine from Bobst, for example. No break-out, sheets are laid out directly on the pallet output after die-cutting. The output contains forks to place small format pallets on. Guaranteed pressure force is 200 tons. Stroke of the moving upper platen is 48 mm. Hardened die-cutting plate and device plate. This machine has hardly been used and is in excellent condition, however we have made modifications to further increase the ergonomics and operational reliability. Can be tested at our company and can be delivered with installation and warranty. The asking price is based on this. For all information in various languages, please open the PDF containing the original folder with explanation and specifications. Some specs: Maximum paper-cardboard size 67 x 91 cm Minimum paper-cardboard size 29 x 35 cm Gripper margin 6 to 14 mm Minimum paper weight approx. 80 -100 grs Maximum cardboard thickness 3 mm or 1.5 mm solid cardboard Stroke of the upper platen 48 mm Maximum rotation speed 4500 per hour Minimum rotation speed 1500 per hour Pressure force 200 tons Total power consumption incl. 80 m3 air pump 10 kW (13Hp) Total weight 7,500 kg Lsdpsv Nwwajfx Ab Ujah The die-cutting section is transported separately from the Spiess insert and must be assembled. The electrical switch cabinet is fully plugged in with the components.

Condition: used, sheet width 750 mm plate length 1250 mm plate thickness 4 mm table surface area 1600 x 1050 mm Lajdpfxoxfb Hme Ab Ujh no. of strokes 180 Hub/min max. punching diameter 105 mm punching pressure 25 t total power requirement 4,0 kW weight of the machine ca. 1,8 t dimensions 1,9 x 1,9 x 1,7 m Punching and nibbling machine - Digital readout for X and Y axis - Tool cabinet with tools

Year of construction: 2001, condition: used, gebraucht 2001 9647 prompt, Zwischenverkauf v Italien 1 30 to 1250+N x 1000 mm 1250 mm 1000 mm Laodpfjwirkgsx Ab Ush 40 m/Min 30 m/Min 50 m/Min 30 mm 730 1/Min 300 1/Min 980 mm 4 kW 115 l 4000 mm 2780 mm 1900 mm 4000 x 2300 x 1900 mm + Z mm 4800 kg With 6-way multitool holder MTE6 (max. Dm. 24 mm) 2 Clamping claws Table with Brushes, table dimension 1970 x 2260 mm Foot pedal 2 pcs. additional single matrix holders PC with Euromac Software Eurowin 8.36 Max. Punching force 300 kN Automatic repositioning up to 10.000 mm Max. Punching diameter for single tool 88,9 mm, Max. Punching diameter Multitool Holder MTE6 Dm. 24 mm Max. Opening the clamping claws 7 mm Transport width: 2350 mm User Manual in english and italian CE declaration available WITH LARGE TOOL PACKAGE several pieces of each of the following dimensions: Round: Dm. 2,5/2,8/3/3,12/3,2/3,5/3,9/4,1/4/4,5/5/5,2/5,5/6/7/7,5/8/8,5/9/9 ,5/10/10,5/11/11,5/12/12,5/13/13,5/14/15/16/18/19/20/21/23 Square: 10/12/13/15 mm Rectangle: 5x2/20x2/22x4 mm Oblong hole: 10x6,5/12x8,5/12,2x10,7/18x5 mm

Condition: excellent (used), Year of construction: 2007, operating hours: 46,500 h, functionality: fully functional, sheet thickness steel (max.): 6 mm, table width: 2,050 mm, table length: 1,250 mm, Very good condition. I am selling beacause of buying new one. Lasdpfxewf Ayws Ab Uoh Maszyna do dyspozycji od grudnia 2025.

Condition: good (used), functionality: fully functional, Year of construction: 2009, machine/vehicle number: 4488, control type: manual, degree of automation: manual, actuation type: manual, punching force: 55 t, stroke rate (max.): 38 1/min, Punching force 550 kN Max. Punching capacity Ø 40 in 10 mm throat depth 500/750 mm Motor power 5 kW Ljdpfxoxd U Nfj Ab Ujah Stroke rate with 20 mm stroke 38 /min Maximum stroke 60 mm Machine weight with throat depth 500: 1150 kg

Condition: excellent (used), machine/vehicle number: PA-399, Format: A3 Paper format: ca 31x45cm Lajdpfxeh Eh U Ro Ab Ueh

Year of construction: 1963, condition: used, functionality: limited functionality, machine/vehicle number: 512804, 1963 Bobst SP900E with double action stripper in reasonable/good condition. Well-maintained.. in recent years for example sprocket wheels, main gripper chains, counterplate under cuttingplate, cardan joints to the feeding head, have been renewed (original Bobst parts) Laedpotyqizjfx Ab Ush Gripperbars have not been renewed recently, they are still in quite a good condition. The knee joints have almost no signs of wear. they were probably at some point and the machine has not been used much since then. There is hardly any screech on them. Machine is dismantled in our storage in the South of The Netherlands, dismantled and not under power. For seriously interested potential buyers we will further upgrade the machine and assemble it and give the possibility to test it inevery way they want. In that case price will be 22,000 euros, loaded on to your transport, EX SITE

Condition: good (used), Year of construction: 1991, machine/vehicle number: 0504791315452, Offer 25218 Technical data: - Pressing force: 350 kN - Punching: e.g. up to 30 mm Ø in steel at 9 mm or up to 28 mm Ø in steel at 10 mm or up to 23 mm Ø in steel at 12 mm - Stroke rate: 72 1/min - Throat depth: 200 mm - Installation height: 293 mm - Drive: 400 V / 1.5 kW - Required space: approx. W 550 × H 1450 × D 700 mm - Weight approx.: 400 kg - Including: - stop table with adjustable stops - electric foot switch - machine base Laedpfxswuqprj Ab Ujh - various punches with die

Condition: reconditioned (used), functionality: fully functional, Year of construction: 2010, laser power: 3,200 W, punching force: 22 t, X Working area max.: 2550 mm Y Working area max.: 1250 mm Control: Rexroth IndraMotion MTX Laser power: 3200 watts Standard equipment: Machine - Stable, easily accessible C-frame - Moving ball roller tables Lsdpfsxbclvsx Ab Usah - Linear magazine for tool stations and clamping claws - 22 tool stations, 3 clamping claws - Foot switch for closing the claws - Flap for punched parts 500 x 500 mm incl. sensor - Chip container - 2 good part containers (punching and laser side) - Initial filling of hydraulic oil - ContourLine - FocusLine - NitroLine - FastLine - Additional Xp and Yp axes - Ejection cylinder for laser parts - Fast flap for laser parts 500 x 500 mm incl. sensor - Raisable laser cutting support - Slag cone detection TRUMPF Laser - CO2 laser TruFlow 2700 - Optimized standby mode - Maintenance-free turbo radial blower - High frequency excitation - Laser control TASC CUTTING HEAD - Lens cutting head with 170 mm lens - Universal quick-change device (UTI) with bus connection - ControlLine PUNCHING HEAD - Electro-hydraulic punching head - Hydraulic single tool holder - 360° rotation - Programmable hold-down device (active / passive / repositioning) - Tool length compensation - Spray lubrication of punch - Punch slug extraction - Level monitoring of thread forming and tool lubrication CONTROL - Open control based on Rexroth IndraMotion MTX - 15" TFT color screen - Teleservice via Internet - Automatic switch-off - Data transfer - USB interface - RJ45 network connection SAFETY - CE marking - Multi-beam light barriers - Quick hydraulic shutdown - Bulge detection - Calculation of filling level in the punching console + Laser TruFlow 3200 including LensLine and optimized standby + Nozzle changer + Thread forming function including thread counter + MultiBend function + MultiTool function + Deburring and rolling technology + Active die + Adaptive stroke calibration + Spray lubrication of die + Repositioning cylinder + Vibration-damped installation + Chip conveyor with tilting container + Brush tables with loading and unloading aid + Blow-out device for small parts + 10 RTC setup cassettes with die plate Automation: + Sheetmaster for sheet metal 2500 x 1250 mm - Suction frame with 36 suction cups (Y-axis=400mm) - Movable suction bar (V-axis=170mm) - Peeling suction cup - Vacuum sensors - Sheet thickness gauge for double sheet control - automatic clamp closing - SheetMaster parallel to main time + Peeling system + Additional package with 9 suction cups + Unloading monitoring + SortMaster Pallet lengthways + GripMaster for sheet metal 2500 x 1250 mm + Scissor lifting table 400 mm + Tiltable scrap pallet 2500 x 1250 mm + Toolmaster 70 + ToolMaster parallel setup + Parts conveyor belt punching station + Parts conveyor belt laser station + Storage interface

Year of construction: 2023, condition: ready for operation (used), General Data Measurements width 950 mm Measurements depth 1700 mm Measurements height 1880 mm Machine weight 1600 kg Ljdpfoxa H Uxsx Ab Uoah Main Drive Spindle motor power 5.5 kW Additional Equipment Punching station with adjustable punch holder and bayonet lock Various punch and die reducers Equipped with work light, electric contact stop, and hydraulic oil Includes 2 working cylinders and 2 foot pedals This Metallkraft HPS 65 DS was manufactured in 2014. It features a robust 65-ton punching station, flat and angle steel shears, and a notching station capable of handling up to 10 mm thickness. Dimensions include a length of 1700 mm, width of 950 mm, and height of 1880 mm, weighing approximately 1600 kg. Powered by a 5.5 kW motor, this machine offers precision with a variety of shearing and punching capabilities. Contact us for more information about this machine. Application Types Punching

Condition: good (used), . Technical data . Lodpfjxa Ef Asx Ab Uoah Pressing force 30 t Stroke 100 - 600 mm Ram stroke, adjustable 8 - 40 mm Installation height 200 mm . Various reels in stock up to 300 kg . . Ongoing purchase of used German machines without NV or CNC control

Condition: ready for operation (used), Year of construction: 2003, functionality: fully functional, Fully automatic high-performance die cutter Renz Kugler 341-2R for calendars and ring binders 3 tools Conveniently operated by a single person, Kugler punching machines are suitable for use in even the tightest spaces. Equipped with a non-stop feeder and gentle top-fed material intake. Capable of trouble-free processing of mixed materials (e.g., cardboard and plastic). Precise alignment before the punching process ensures maximum accuracy. Ideal for perforating ring binder inserts, cardboard and plastic calendar/index sheets, paper for wire-bound products, and much more. Tool changes only require a few simple steps. After punching, a turning wheel maintains the correct sequence for printed and numbered products, transporting them to the delivery station. Precise and simple register adjustment. Performance features - Minimal maintenance required - Highly efficient - User-friendly operation - Fastest changeover between formats Technical data - Working width: 500 mm - Maximum punched page format: 500 mm - Maximum unpunched page format: 500 mm - Maximum punching thickness: 3 mm per layer - Punching speed: 110 cycles/min - Paper feeding: automatic, non-stop paternoster feeder - Paper delivery: automatic, box delivery with jogger - Paper grammage: min. 60 g/m², max. 2 mm (subject to gram/quality restrictions) Laodpfx Aexduclob Ujh - Register punching: yes (not included) - Interchangeable tooling - Tool changes require only a few manual operations - Quick format change, manual setting wheels - Adjustable edge distance - Punching unit can be selectively deactivated - Space required: 3.30 x 1.50 m - Net weight: 1,580 kg