Used Turret Punching Machine for sale (91,324)

Condition: used, Year of construction: 2007, Punching machine Amada EMK 3610 NT, year 2007, including loading unit MB300. The machine can be inspected under power at any time. Kdedpfx Aexn Rfqjfisu

Year of construction: 2021, condition: good (used), Die-cutting and embossing machine Manufacturer: Heidelberg Model: Promatrix 106 CS Year of manufacture: 2021 Ksdpfxovxu Sms Afiedu Min. sheet size: 300 x 350 mm Max. sheet size: 760 x 1,060 mm Max. machine speed: 8,000 sheets/h Max. die-cutting pressure: 2.6 MN / 260 t Materials and pile height (incl. pallet) Paper min.: 90 g/m² Cardboard / solid board max.: 2,000 g/m² Corrugated board max.: 4.0 mm Feeder pile height: Without non-stop: max. 1,500 mm In non-stop operation: max. 1,200 mm Max. feeder pile weight: 1,500 kg Without blanking station Without MasterSet 91025ä

Condition: used, IMV Punching Press Type: DM 125 Year of manufacture: 2016 Pressing force: 1,250 tons Stroke adjustment: 250 - 500 mm Ram adjustment: 300 mm Strokes per minute: 5-35 Installation height: 1,150 mm Kdsdpfexnxlxex Afieu Table area: 4,500 x 1,800 mm Ram area: 4,500 x 2,000 mm

Condition: excellent (used), Year of construction: 2015, functionality: fully functional, punching force: 330 t, Machine for punching, embossing, waste removal, and blank separation - as is - System equipped with a high-performance sheet feeder designed for automatic NON-STOP operation ⦁ For fully automatic punching, creasing, and embossing with or without gripper edge ⦁ For removal of internal waste as well as lateral and rear sheet edges ⦁ For stack-like delivery of punched and waste-removed sheets with attached gripper edges or ⦁ For separation of gripper edges and subsequent stack-like delivery of the remaining sheets ⦁ With a patented gripper carriage registration system for highest registration accuracy ⦁ With a pile stacker machine enabling fully automatic interleaving sheet feed as well as NON-STOP stacking and does not require modification even for the smallest job sizes (exchange table with comb structure) ⦁ Interleaving sheet magazine with electronic level monitoring, refillable during production ⦁ With Centerline equipment ⦁ With automatic pallet change device at the delivery section Specification Maximum sheet size: 760 x 1060 mm Minimum sheet size: 350 x 400 mm Maximum punching force: 3.3 MN (330 t) Speed: 9,000 sheets/hour Processable materials: Paper min. 80 g/m² Cardboard up to 2000 g/m² Corrugated board up to 3 mm (max. sheet warp 4%) Equipment: Optical sheet register (Dyset) Automatic non-stop feeder Waste removal station Blank separation station Centerline Fully automatic pallet changing device at delivery Incl. platform Quick-lock frames at all tooling stations Kedpfoww E Nrex Afijdu

Condition: used, Shear/Punching machine FICEP 604 N Year of construction: 2002 Shear capacity: 60 T Iron cutting capacity: 100 x 100 x 10 mm Kjdexnixvopfx Afijdu Cutting capacity in the round: Ø 45 mm Square cutting capacity: 42 mm Shearing: Length 350 x 16 mm max (see abacus) Punching: Max Ø 32 x thickness 16 mm Supplied with many punches Voltage: 380 V Dimensions (L x W x H): 1700 x 800 x 2200 mm Weight: approx 2 T

Condition: good (used), Year of construction: 1998, functionality: fully functional, punching force: 30 t, total height: 2,800 mm, total width: 7,000 mm, total length: 12,000 mm, sheet thickness (max.): 6 mm, sheet thickness steel (max.): 6 mm, sheet thickness aluminum (max.): 6 mm, working range: 2,000 mm, type of input current: three-phase, workpiece weight (max.): 150 kg, overall weight: 12,000 kg, table width: 1,250 mm, table length: 2,500 mm, compressed air connection: 6 bar, input voltage: 110 V, Equipment: safety light barrier, Turret punch press Muratec wiedemann Vectrum 3046α + Cell loader F1-1250 Machine is in good working condition. Possible to see. Machine available latest Oktober 2026. --- The VECTRUM-3046 Alpha is a servo hydraulic CNC turret punch press, which incorporates MURATECs indigenously designed servo hydraulic cylinder that allows the operator to set the desired punching speed and positioning of the ram for greater punching control. The VECTRUM-3046 Alpha enables high speed Kdsdpfexm Rkkjx Afiou processing, quiet operation, and outstanding quality parts production at the same time. --- Features: - High speed processing : Punching: 400 HPM, Nibbling: 1000 HPM - High precision processing of +/- 0.07 mm - Quiet punching due to optimised control of ram speed - Largest capacity tool - 121 mm (4.75) - Punching capacity 30 Ton [33 US Ton] - Maximum sheet thickness 6.35 mm [0.250] - Maximum sheet size puncheable without repositioning (Y x X) 1250 mm x 2000 mm - Maximum sheet size possible to autoload/unload (Y x X) 1250 mm x 2500 mm

Year of construction: 1988, condition: excellent (used), machine/vehicle number: 0581 007 04, Speed: up to 9000 sheets per hour Format (cm): max. 102 x 72 // min. 40 x 35 Cutting force: up to 2.5 MN (250 t) Equipment / Additional information: Die-cutting plates (over 500 pieces) Tools Technical data Convertible stock: - paper: min. 80-90 g/m2 - cardboard: max. 2000 g/m2 - corrugated board B and E-flute: max. 4 mm Sheet size: min. 35 x 40 cm // max. 72 x 102 cm Cutting size : - with front waste max. 70,5 x 102 cm - without front waste max. 72 x 102 cm Cutting force: max. 2.5 MN (250 t) Running speed/hour: Kdodpfx Afexixhisieu Depending on board quality and kind of job: max. 9000 sheets Pile height: - pallet feeder: max. 135 cm - universal feeder: max. 140 cm - delivery: max. 120 cm - delivery with pallet conveyor: max. 102 cm Power of main motor: 15 kW (20 HP) Connected load: 55 kWA Net weight: 22000 kg Gross weight: 25000 kg

Condition: good (used), Year of construction: 2000, functionality: fully functional, machine/vehicle number: 53, Bruderer BSTA 18 PH1000 E (2000) – For Sale Kdsdpfx Afoxawcyjisu Well-maintained Bruderer BSTA 18 PH1000E from 2000 in good condition. The machine is in full working order and ready for immediate use. Available now and can be tested in Boxtel, Netherlands.

Condition: as good as new (ex-display), Year of construction: 2022, operating hours: 60 h, functionality: fully functional, +++ Demo machine, approx. 60 operating hours +++ +++ Descending Die +++ Basic machine: TruPunch 3000 large format (S20) Machine: - Box frame - Hybrid axis system - Linear tool magazine with 24 stations for clamps and tools - Hydraulic clamps (3x) - Drives with maintenance-free three-phase motors - Repositioning with programmable presser foot - Foot switch to close clamps - Part chute, right - Part removal flap, left Kodpfxjxmfc Uj Afijdu - Sensor for part removal flap - SortMaster Compact retrofit-prepared Punching head: - Delta Drive - Rotating single-station tool adapter - Programmable presser foot position - Tool length compensation - Punch spray lubrication - Punching slug vacuum - Forming function - Punch stroke counter Control: - TRUMPF control based on Rexroth IndraMotion MTX - Touch panel with 19" TFT color display - Touchpoint - Auto-shutdown - Remote support interface - Program manager - Production plan Data transmission: - Central Link - Online Update Manager Safety: - CE marking and EC Machinery Directive - Double-beam safety light barrier Advanced standard configuration: - First index pin (inside right) - Ball tables - Part chute for finished part container - Chip container to rear for removal Advanced machine and punching features: - MultiTool function - MultiShear function - MultiBend function - Tapping function with thread counter - Forming tap breakage control - Lubricant level monitoring - Unlimited time license - Marking/Quick beading function (option) - Engraving function - Deburring and roller technology function - Adaptive stroke calibration - StripLine - Die spray lubrication with fill level monitoring - Descending Die - Integrated flattening function - Smart punch monitoring - Additional clamp - Height-adjustable clamp - Vibration damping - Chip container removed to front - Brush tables with loading and unloading assistance - Warped sheet detection Technical data TruPunch 3000 large format (S20) Dimensions / Weight: Width: 7644 mm Depth: 7666 mm Height: 2200 mm Weight (fully equipped): 13,800 kg Control / Hardware / Electrics: Hard disk type: SSD Number and size of hard disks: 2 x 120 GB Customer program memory: 10 GB Display: Touchscreen Display size: 21.5 in Interfaces: USB Network: RJ45 Control type: Bosch CML75 Operating system: Windows 10 IoT Axis data: X/Y/C axis drive: NC-controlled, maintenance-free three-phase servo motors Punching head drive: Electric Max. X axis speed: 90 m/min Max. Y axis speed: 60 m/min Max. simultaneous axis speed: 108 m/min Max. C axis speed (punching): 350 rpm Max. C axis speed (tapping): 350 rpm Max. punching stroke rate (E=1mm): 690 1/min Max. marking stroke rate: 1000 1/min Accuracy — positioning deviation Pa: +/- 0.1 mm Accuracy — position range Ps: +/- 0.03 mm Smallest programmable increment: 0.001 mm Working range / Workpiece size: Max. sheet thickness: 6.4 mm Max. workpiece weight: 230 kg X axis working range: 3000 mm Y axis working range: 1550 mm Punch-specific data: Max. punching force: 180 kN Max. presser foot force: 20 kN Max. tool size, punching (outer diameter): 76.2 mm Max. tool size, forming (outer diameter): 101.6 mm

Condition: good (used), Year of construction: 2004, Pfäffle F 64 a Automatic Punching Machine For automatic and continuous punching of binding perforations for loose leaf binding, filing hole systems, corner rounding, index cutting and other edge perforations. Including the punching tools Technical details Max. paper size 420 x 420 mm Min. paper size 210 x 100 mm Punching thickness up to 2 mm Kdodsu T Dixepfx Afieu Punching speed 4.200 – 5.000 punch operations/hour Punching capacity up to 8 m paper pile / hour Electrical equipment 230/400 V; 3 phase; 50/60 cy; 0,75 kW Required floor space 1,80 m x 0,90 m 2,10 x 1,00 m Weight 600 kg

Year of construction: 2006, condition: excellent (used), Bobst Autoplatine Speria 106 E STANDARD EQUIPMENT MACHINE - Centerline system for quick job changeover. - Electronic sheet travel monitoring system. - Adjustable centering at the stripping station. - Control cabinet air conditioning unit. - Bobst electronic control system C.U.B.E. (Control Unit Bobst Electronic). This microprocessor-based Bobst system allows the operator to easily manage, visualize, and monitor the machine’s various functions and components. Kdsdpjxl Taljfx Afiou - Main motor with frequency inverter control. FEEDER - Pile tray with handle for easy manual lateral alignment during production. - Synchronization device ensuring proper sheet arrival to the front lays when the machine is stopped. - Automatic pile lifting controlled by pressing foot. - Rear pile guides (operator side and opposite operator side). - Adjustable side blowers with Centerline markings. - Suction unit. FEED TABLE - Feed table with anti-static stainless steel covering. - Feed table entrance equipped with lateral ramps. - Four front lays, pairwise adjustable, with front register control. - "Pull" guide (operator side), adjustable with Centerline markings and side register control. - Double sheet detector. - Support plates at platen station entry. - Sheet hold-down mechanism (guides sheets to front lays). - Upper frame with manual lifting device. - Upper transport system for paper, paperboard, and corrugated board. - Transport belts with lateral guides and automatic tensioning system. PLATEN - Gripper reopening device. - Centering and locking for equipment. - Locking the chase to the upper beam. - Cutting force measurement with strain gauge. 1 synthetic supporting plate. 1 upper chase: fixed bottom plate. 1 cutting plate. WASTE STRIPPING STATION - Air-cylinder-driven upper frame lifting. 1 upper pull-out frame (with crossbars and clamps). 1 lower pull-out frame. DELIVERY - Pile tray. - Front jogger. - Adjustable rear and side joggers with Centerline markings. - Braking brush. - Manual non-stop rack. AVAILABLE EXTRAS B MACHINE 1 B-1 Raised machine base C FEEDER 1 C-4 Manual non-stop device E PLATEN 1 E-5 Compensating plate 1 E-55 Micro-adjustable supporting plate centering F WASTE STRIPPING STATION 1 F-31 Quick-lock device for the upper pull-out frame

Condition: used, Year of construction: 1997, sheet width 1015 mm plate length 1015 mm Kedpfx Ajuiz Iwsfiedu plate thickness 6,0 mm Punching capacity 25 t punch diameter 88,9 mm total power requirement 16 kW weight of the machine ca. 12000 kg dimensions of the machine ca. 4000 x 2320 x 2300 mm

Condition: good (used), Stock number: 2832 Machine number: 3004/73 Manufacturer: Raster Year of construction: 1973 Type / Model: HR40NL Pressing force: 40 t Table: 650 x 385 mm ram: 350 x 190 mm Projection: 175 mm Distance table - bottom edge of plunger: 300 mm through hole: 350 x 130 mm ram adjustment: 80 mm Plunger stroke: 0 to 70 mm adjustable Installation height: 235 to 305 mm Sheet width: 10 to 200 mm Sheet thickness continuous stroke: mm Stroke rate: 40 to 180 /min Connection: 4 kW Accessories/equipment: Pliers feed Condition: good Weight: approx. 4 tons Machine dimensions: 1,400 x 1,800 x 2,250 mm Kdoderdgncepfx Afisu

Condition: good (used), Year of construction: 1996, functionality: fully functional, machine/vehicle number: 1365, pressing force: 80 t, Schaal SEP 80 (1996) [80 ton] – For Sale Kdodpfx Aexawhvjfiju Well-maintained Schaal SEP 80 from 1996 in good condition. The machine is in full working order and ready for immediate use. Available now and can be tested in Boxtel, Netherlands.

Condition: used, Year of construction: 2019, functionality: fully functional, total height: 2,100 mm, total width: 9,000 mm, sheet thickness (max.): 6 mm, punching diameter: 105 mm, overall weight: 17,500 kg, table height: 900 mm, color: blue, power of feed motor: 20,000 W, Punching machine equipped with two independent tool stations with electrohydraulic heads and HiFocus 160i plasma unit from Kjellberg. The machine is characterized by: - automatic adjustment of the plasma torch height, - TRUMF quick tool change system - short changeover time; - X-axis movement range from 0 to 3000 mm, - Y-axis movement range 0d 0 to 1500 mm, - stepless adjustment of feed speeds, - possibility of nibbling, punching and embossing, - stepless adjustment of stroke height up to 90 mm, - tool punching up to 6 mm thick, - plasma torch cutting up to 12 mm thick, - easy programming. Available functions: - single hole, - row of holes, - circle of holes, - circle nibbling, - rectangular chipping, - matrix, - nibbling of cuts, Kodowayilopfx Afiedu - object rescaling, - contour program (in combination with Rotation station), - subroutines, - object repetition, - trimming, - hole-free zone, - ellipse, - V-belt, - mirror image, - waste removal. High-quality plasma cutting unit for structural steel, high-alloy steel and aluminum. Reduces the use of additional processing due to the appropriate cutting surface. Water-cooled PerCut 210 plasma torch with high heat dissipation efficiency and long nozzle durability thanks to the use of swirl gas technology.

Condition: used, Punching Machine MUHR & BENDER - MUBEA Model KL 350 / 203 Machine No. KL3509864 Year of manufacture: 1998 Punching force: 35 tons Throat depth: 200 mm Ram stroke: 22 mm Capacity: Ø 28 mm in 10 mm sheet (at 450 N/mm²) Ø 23 mm in 12 mm sheet (at 450 N/mm²) Ram plate: 265 x 70 mm Ram plate thickness: 25 mm outside / 50 mm in the center Table plate: 285 x 250 mm, thickness 40 mm Table cutout: 115 x 85 mm Drop-through opening in table cutout: 115 x 25 mm Installation height: 125 mm (with table and ram plate) Number of strokes: single stroke via foot switch Motor power: 1.5 kW Power supply: 400 Volt, 50 Hz - Electric foot switch for stroke activation - Manual lever search device for punch movement - Special tool as punching tool Space required (L x W x H): 800 x 800 x 400 mm Weight without tool: 340 kg Weight with tool: 370 kg Kdsdoxf Utaepfx Afieu Good condition

Condition: ready for operation (used), Year of construction: 2018, operating hours: 16,000 h, Additional Equipment Precision deburring and roller technology Smart Punch Monitoring Parts conveyor belt for part removal flap Advanced punching equipment This TRUMPF TruPunch 1000 (S19) was manufactured in 2018. It features a closed machine frame, hybrid axis system, and a linear magazine with 20 spots for clamps and tools. Equipped with maintenance-free 3-phase servo motors and a TRUMPF control based on Bosch Rexroth IndraMotion MTX, it offers advanced punching capabilities and efficient operation with only 16,000 work hours. Contact us for more information about this machine. Kdedpfxoxf N Ras Afisu Application Types Punching

Condition: ready for operation (used), - invoersysteem voor plat- en hoekstaal - met toevoerwagen en materiaalklem - Vacon 110 software CNC-besturing Hydraulische schaar voor vlak staal VPS 2200 cap: 220 ton maximale lengte: 15 200 mm breedte/dikte: 500/25 mm hoek: +/- 45° Hydraulische hoekschaar voor staal VHS 2400 cap: 240 ton maximale lengte: 15 200 mm 200 x 200 mm / 16 mm Hydraulisch ponsen VPO 1000 cap: 100 ton ponsdiameter/dikte: 57/15 mm of 32/25 mm 4 ponsunits voor vlak staal (Verticale positie) 1 ponseenheid voor hoekstaal (horizontale positie) incl. gereedschap Hydraulische teller VNI 1/36 1 codeerschijf 36 tekens Kedewlkw Dspfx Afijdu tekenhoogte x diepte: 10 x 1 mm Hydraulisch aggregaat VHA 37 37 kW - 250 bar

Condition: excellent (used), Year of construction: 2013, operating hours: 43,028 h,  Max. force: 180 kN  Max. plate thickness: 6,4 mm  Axe X: 2500 mm  Axe Y: 1250 mm  Max. workpiece weight: 150 kg Kodpfx Aoxftz Ajfijdu  Machine dimensions 6282 mm x 6548 mm x 1990 mm

Condition: good (used), Year of construction: 1990, functionality: fully functional, machine/vehicle number: 1058, pressing force: 40 t, Schaal SEP 40 (1996) [40 ton] – For Sale Well-maintained Schaal SEP 40 from 1984 in good condition. The machine is in full working order and ready for immediate use. Kdsdpfx Aoxawimsfieu Available now and can be tested in Boxtel, Netherlands.

Condition: used, Year of construction: 1993, Bobst SP 130 ER II Year: 1993 Max. speed: 7000 sheets/hour Max. size: 920x1300 mm Min. size: 450x580 mm Max. cutting force: 500 t Centerline Non-stop In production Kdjdpfxsxfqu Hj Afiju

Condition: excellent (used), Year of construction: 1996, total height: 3,800 mm, ram adjustment: 100 mm, total width: 2,300 mm, total length: 4,000 mm, table length: 1,250 mm, table width: 900 mm, Decoiler DREHER Type 2370 BFPS YOP 1996   Kedpsuql Ulsfx Afisdu Straightning DREHER KMV 400 YOP 1996 Capacity Kg: 125000 Table Length: 1250mm Table Width: 900mm Ram adjustment: 100mm Strokes: 30 - 180Min. Length: 4000mm Width: 2300mm Height: 3800mm Weight: 23080kg

Condition: excellent (used), METALLKRAFT Profile Steel Shear / Punch HPS 65 DS Combined Hydraulic Profile Steel Shear and Punch with Punching Station, Notching Station, and Flat Steel, Angle Steel, and Profile Steel Shear – enables simultaneous operation at punching and profile steel shear. Punching Station - Punching Force: 65 t - Punching Capacity: max. Ø 26 x 20 / Ø 57 x 10 mm* - Throat Depth: 305 mm - Stroke Length: max. 55 mm - Number of Strokes: 25 strokes/min - Working Height: 900 mm Rod Steel Shear - Cutting Capacity Round: max. Ø 45 mm* - Cutting Capacity Square: max. 45 x 45 mm* Angle Steel Shear - Cutting Capacity L-Profile 90°: 120 x 120 x 12 mm* - Cutting Capacity L-Profile 45°: 70 x 10 mm* - Cutting Capacity U/I Profile: 120 x 58 mm - Cutting Capacity T-Profile: 90 x 11 mm - Working Height: 1,140 mm Flat Steel Shear - Cutting Capacity 90°: max. 300 x 20 / 375 x 15 mm* - Miter Cut 45°: max. FL 100 x 15 mm* - Blade Length: 380 mm - Working Height: 900 mm Notching Station - Material Thickness: max. 10 mm* - Notching Width: max. 45 mm - Notching Depth: max. 90 mm - Notching Station: 100 x 100 x 10 mm Machine Data - Motor Power: 5.5 kW | 400 V - 50 Hz - Dimensions (LxWxH): 1700 x 950 x 1880 mm - Weight (net): approx. 1,600 kg Shipping on pallet via freight forwarder possible Europe-wide. Additional machines available! Take a look at our listings. If you have any questions, feel free to contact us by message or phone: Maschinenhandel Nord Gerstenstraße 2 17034 Neubrandenburg Kdsdpfoxizanjx Afiju

Condition: good (used), Year of construction: 1983, functionality: fully functional, machine/vehicle number: 6603, Bruderer BSTA 25 (1983) – For Sale Kjdpfx Afexawcgjijdu Well-maintained Bruderer BSTA 25 from 1985 in good condition. The machine is fully operational and ready for immediate use. Available now and can be tested in Boxtel, Netherlands.

Condition: good (used), Year of construction: 1985, Bruderer BSTA 25 (1985) – For Sale Well-maintained Bruderer BSTA 25 from 1985 in good condition. The machine is in full working order and ready for immediate use. Available now and can be tested in Boxtel, Netherlands. Kodpfexamv Asx Afiodu