Used Turret Punch Amada for sale (224)

Condition: excellent (used), functionality: fully functional, Year of construction: 2001, control type: CNC control, bending force (max.): 130 t, working width: 3,100 mm, number of axes: 6, Equipment: CE marking, european tool clamping system, lower tooling, safety light barrier, upper tooling, Used Amada HFE 3metre x 130ton cnc pressbrake for sale TYPE HYDRAULIC DOWNSTROKING CAPACITY 130 TONS CONTROLLED AXIS Y1, Y2, X, R1 R2 Z1 Z2 MAX BEND LENGTH 3000 MM OPEN HEIGHT 470 YEAR 2001 STROKE LENGTH 200 THROAT DEPTH 420 MOTOR POWER 11 KW FRONT GUARDING MACHINE MOUNTED ERWIN SICK ELECTRONIC SIDE INTERLOCKED FENCING Lodow Ugg Eepfx Affjak REAR INTERLOCKED FENCING TONNAGE 1300 KN APPROACH SPEED 100 MM/SEC BENDING SPEED 1 – 10 MM/SEC RETURN SPEED 1-100 MM/SEC OIL CAPACITY 110 LITRES WEIGHT 7800 KG BACK GUAGE STROKE (X AXIS) 700 MM/S MAX GUAGE 1000MM

Condition: excellent (used), Year of manufacture: 1991 Model: ITPS III Serial number: ITPS 80C 25 P1C226 Maximum pressing force: 1800 kN Laedpfx Afswq Dpqofok Working stroke: 115 mm Power supply: 415 V, 50 Hz, 3 phases Rated current: 119 A Installed power: 18.5 kW Machine weight: 4940 kg Inventory number: 9.14 Control: Delem DA-65R The machine starts up, but the control unit does not respond to commands. The previous owner replaced the original AMADA control with a DELEM unit.

Condition: like new (used), Year of construction: 2019, AMADA - LCG3015AJ - 2019 as good as new - control system: AMADA - fiber laser 2100 W - table size: 3000 x 1500 mm ( x 2 ) - operating time: 300 hours - documents Lasdpfx Afjiv S Nqofok - weight: 9400 kg - under power Due to high office costs (customs regulations) we do not deliver to Turkey Turkey, Iran, Russia and Belarus.

Condition: used, Year of construction: 2006, pressure 80 t chamfer lenght 2550 mm distance between columns 2050 mm Stroke beam 200 mm max. opening beam/table 470 mm C-recess 350 mm max travel X-axes 700 mm Z1+Z2 axes controlled by cnc nein, manuell 4 finger mm max. distance R-axes 200 mm Quick speed,inspeed 100 mm/sec bendingspeed 0-10 mm/sec opening speed 100 mm/sec Number of working hours 43000 h length 3100 mm width 1600 mm height 2550 mm weight 5750 kg Lasdpfetv Rlbjx Affsk total power requirement 9 kW dimensions of the machine ca. 3x2x2,5 m Control Amada OP2002 All machines can be viewed under power at all times. Demonstrations of the machines possible at any time.

Condition: reconditioned (used), Year of construction: 2014, functionality: fully functional, grinding length: 800 mm, grinding width: 400 mm, grinding wheel diameter: 355 mm, distance table to spindle center: 500 mm, table load: 1,000 kg, type of input current: three-phase, overall weight: 5,000 kg, grinding spindle motor power: 7,500 W, grinding wheel speed: 2,500 rpm, input voltage: 400 V, Equipment: documentation/manual, TECHNICAL CHARACTERISTICS: CNC control : FANUC series 32i-B W axis travel (longitudinal axis) : 1000 [mm] Min stroke speed W axis : 0.1 [mm/min] Max stroke speed W axis : 40000 [mm/min] Rapid traverse rate W axis : 40000 [mm/min] X axis travel (transverse movement) : 450 [mm] Min stroke speed X axis : 0.1 [mm/min] Max stroke speed X axis : 5000 [mm/min] Rapid traverse rate X axis : 5000 [mm/min] Resolution X axis : 0.0001 [mm] Stroke Y axis (vertical movement) : 500 [mm] Min stroke speed Y axis : 0.1 [mm/min] Max stroke speed Y axis : 500 [mm/min] Rapid traverse rate Y axis : 2000 [mm/min] Resolution Y axis : 0.0001 [mm] Table length : 600 [mm] Table width : 400 [mm] Lodpfowulg Esx Affeak Max distance spindle nose / table : 500 [mm] Max load on table : 1000 [Kg] Grinding wheel min speed : 300 [rpm] Grinding wheel max speed : 2500 [rpm] Grinding spindle motor power : 7.5 [kW] Max diameter grinding wheel : 355 [mm] Max grinding wheel width : 50 [mm] Grinding wheel bore : 127 [mm] Total power required : 23 [kVA] Weight : 5000 [Kg] EQUIPMENT / INCLUDED OPTIONS: x1 electro-magnetic chuck 600 x 400 [mm] x3 glass linear scales on the 3 linear axes x1 workpiece probe x1 paper filtration unit x1 oil chiller DAIKIN AKZ149M133 x1 oil mist collector IFS type IFMC 1100 x1 transformer The information on this page has been obtained by the best of our ability. Therefore, its accuracy can not be guaranteed

Condition: excellent (used), Year of construction: 2014, operating hours: 7,998 h, machine/vehicle number: 43610191, sheet thickness aluminum (max.): 6 mm, We are offering an Amada EML 3610NT punch laser combination machine for sale. The offered machine is used and in a very good condition. Main features of the machine (overall): - Possibility of combining punching and laser burning - automatic pick-up of details (suction cups for 45kg, small amount of perforation recommended) and exchange of pallets during the operation of the machine - automatic sheet feeding maximum length 3050x1500 and collection of residues after cutting, possibility of sheet loading during machine operation - automatic bale delivery 1500x400mm (two conveyor belts for details) - turning station with 41 fixed and 4 rotating stations - 3 manually adjustable paws - cutting elements on length 3020x1500 - Laser cutting length 2000x1500 - max. sheet thickness 6mm (due to brush table) - thread function - pneumatic hold-down device Accessories for the machine: - Light barrier - Thread cutting set - Sensor for bale chute - System for chip extraction - Separate lubrication of punching and threading tools - Bending sensors for sheet metal - A conveyor belt that pulls out the punching waste Machine data as of 17.09.2024 - Time of the running machine: 7998 hours - Operating time: 2972 hours - Cutting time: 1196 hours - Working time of the resonator: 6154 hours AMADA EML3610NT - Max. Cutting force: 300 kN - Power (laser efficiency): 4kW (CO2) - Type: EML-NT - No. 43610191 - Model:EML3610NT - Year of manufacture: 2014 November - Total value of the connection to the network: 400V/68.3 kVA - Connected load: 85 kVA - Compressed air connection: 8 bar; 48 m3/h - Width of the guarded area: 30m (max) - Minimum safety distance: 1.36 m - Response time of the machine + total response time of the firewall: 320ms - Stop time: 300 ms - Machine braking distance: 180mm - Weight of the punching/laser machine: 24,000 kg PRIII (reception of finished parts) Lodpfxoum R T So Affsak - Model: PR III 300 L 2P - No.: 2424 - Year of construction: 2013 - Connection to the network: 400/50V/Hz - Max. Power supply: 8.5 kW - Compressed air connection: 6 bar 1000 l/min. - Dimensions and weight of the elements to be collected: Workpiece thickness from 0.5 to 3mm Min.150x150mm max. 2500x1000mm with a weight of no more than 45kg - Machine weight (PRIII): 4600 kg ASIII MP (sheet feeder) - Model: ASIII MP 300 - No.: 2994 - Year of construction: 2015 - Connection to the network: 400/50V/Hz - Max. Power supply: 12kW - Compressed air connection: 6 bar 1000 l/min. - Size of sheets that can be stored: Max. 3000x1500mm Minimum steel thickness 1000x300mm from 0.5 to 8mm Weight of a single sheet no more than 300kg - Machine weight (PRIII): 12 000 kg The price is for the entire machine only. The price does not include Tools, dismantling, transportation and commissioning If you have any further questions, please do not hesitate to contact us. The machine is offered in different sources. If you are interested, please confirm availability.

Condition: excellent (used), Year of construction: 2011, power: 4 kW (5.44 HP), MODEL USED AMADA LC 3015 FI NT 4 KW CNC LASER CUTTING MACHINE WITH LST3015 F1 TWIN SHUTTLE TABLE and TOWER SYSTEM FOR SHEET LOAD AND UNLOAD CAPACITY FOR SALE description AMADA LASER MODEL LC3015 F1 4KW AF 4000i-B CONTROL AMNC-PC MAX LASER OUTPUT 4000 / 4KW Laodpfx Ajqcu Eqjffjk Year 2008 MAX SIMULTANEOUS FEEDRATE M/PER/MIN (X/Y 170M/MIN MAX SHEET SIZE 3070 X 1550 X 100 (Z AXIS) MAX MATERIAL THICKNESS 20 mm M.S. MAX MATERIAL THICKNESS 12 mm MAX MATERIAL THICKNESS ( ALUMINIUM A5052) 10 mm

Condition: like new (used), functionality: fully functional, Year of construction: 2017, operating hours: 2,600 h, control type: CNC control, controller model: Fanuc 32 C, Equipment: documentation/manual, Standard programs such as parameter settings Dressing settings Speed settings Program management settings Limitation of travel distances x + y Basic parameter settings Grinding wheel management program Warming-up cycle program Surface plunge grinding program Measuring program 15 kVA transformer Full enclosure Meister G3 Spindle upgrade to 3.7 kW, disc 225 mm ETHER interface for network connection Control module with extended memory Fanuc Macro B option Program creation for batch programs Programmable spindle speed WinWop program for contour creation (Windows) WINWop program for error compensation WinWop postprocessor CGS Complete Grinding Solutions software Option Dressing Swiveling profile dressing device Diamond dressing wheel Pre-dressing device VPA 100 L Diamond wheel 100 mm for pre-dressing device Regrinding package diamond wheel G3 / W Option – Clamping and Balancing Magnetic chuck 400 x 200 400 mm stop bar with prism Fully automatic balancing device, size 1 Lajdpfxsw I Tt Se Affok Grinding wheel flange for G3, bore 51 mm Option Filter Systems Belt filter system 175 l Extraction unit for emulsion mist 500 Inquiries only from Europe, preferably the EU.

Condition: ready for operation (used), functionality: fully functional, Year of construction: 2000, operating hours: 99,800 h, control type: CNC control, degree of automation: automatic, bending force (max.): 100 t, working width: 3,000 mm, overall weight: 6,800 kg, Amada HFE 100-3 – 100 Ton CNC Press Brake Discover precision and reliability with this Amada HFE 100-3 press brake, perfect for demanding sheet metal work. Built by Amada, a leader in press brake technology, this machine delivers consistent, high-quality bends with excellent repeatability. Key Specifications: Lasdpfx Afexp Nqzefek Tonnage: 100 tons – ideal for medium to heavy sheet metal work Working Length: 3000 mm – accommodates large panels Stroke: 200 mm – precise forming capabilities CNC Control: 6-axis Y1, Y2, Z1, Z2, R1, R2 Back Gauge Travel (X-axis): 500 mm, Y-axis: 200 mm – accurate positioning Speed: Fast approach and return (100 mm/s) with precise working speed (10 mm/s) Highlights & Features: Energy-efficient hydraulic system designed by Amada Servo-controlled back gauge for fast, accurate bends Compatible with all standard Amada tooling Original electrical cabinet and hydraulics in perfect condition Robust, durable design built to last This Amada HFE 100-3 is a reliable workhorse that combines precision, speed, and flexibility – perfect for workshops looking to expand their production capabilities Please verify all technical specifications with the seller.

Condition: excellent (used), functionality: fully functional, Year of construction: 2005, operating hours: 12,096 h, Amada hydraulic press brake type HFT 130-3 working width 3100 mm max. pressing force 130 tons CNC-controlled Y1 Y2 X and R axes CNC control CNC OP 2000 Fiessler light curtain Drive power 12.5 kW Weight 8200 kg Ledpsxhfuyofx Affeak

Condition: ready for operation (used), functionality: fully functional, Year of construction: 2008, laser power: 4,000 W, table length: 1,500 mm, table width: 3,000 mm, Equipment: cooling unit, No minimum price – guaranteed sale to the highest bidder! The machine was serviced in 2022 by an Amada specialist. The service protocol can be found attached to this listing! TECHNICAL DETAILS Laser power: 4 kW Table width: 3,000 mm Lodpfjxgg Irex Affsak Table length: 1,500 mm EQUIPMENT Ridel chiller Donaldson extraction unit 2 exchange tables

Condition: ready for operation (used), AMADA PROMECAM 3000 x 6 shears Type GPX 630 Capacity 3000 x 6 Maximum stroke 160 mm Rate 16 to 45 strokes/min Cutting angle from 40' to 2°20' Rear stop stroke 1000 mm Motor 15 kw Approximate weight 6500 kg Lajdovt Svropfx Affsk Dimensions 3750x2000x1850 mm

Year of construction: 2003, condition: excellent (used), Amada GS 630 sheet metal hydraulic cutting machine for sale G Series Hydraulic Shear – Video at the bottom of this listing Specification: Lajdpfx Afsimwcqsfsk Model: 630 Max Plate Thickness mild steel (mm): 6.35 Max Plate Thickness stainless steel (mm) 4 Max Cut Length (mm) 3050 Max Stroke / min 35 Motor Size (Kw) 5.5 Machine Weight (Kg) 6150 Back gauge speed (mm/s) 100 Back gauge Range (mm) 10-1000

Condition: good (used), functionality: fully functional, Year of construction: 2007, operating hours: 13,800 h, AMADA ASTRO II 100 NT bending cell Automatic bending/folding cell - press brake with bending robot Manufacturer: AMADA Type: ASTRO 100 NT Year of construction: 2007 Condition: used Control: AMNC II PC Switch-on hours: 38536h Laedjxgbmcspfx Affsk Automatic operation: 13739h Pressing force: 100 tons bending length: 3000 mm Tool clamping: AMADA, standard Clearance between uprights: 2700 mm Projection: 415 mm Stroke: 200 mm Installation height: 500 mm Adjustment range backgauge: 600 mm Width of the work table: 60 mm

Condition: like new (used), Year of construction: 2013, Technical Data / technical details: The FLW is a flexible and highly productive laser welding cell with extensive equipment. The focused laser beam is used as an energy source to melt and join materials together. The laser welding cell consists of a fiber laser and a 6-axis industrial robot, which moves along a travel rail. The parts to be welded are clamped onto a rotary-tilting table. The safety enclosure is equipped with a sliding door to ensure safe operation. Robot: Type: M-710iC/50 (FANUC) Lajdpoxndynsfx Affok Robot controller: SYSTEM R-30iA (FANUC) CNC control: AMNC Number of controlled axes: 6 Reach: 2,050 mm Welding head: AMADA Repeatability: 0.07 mm Safety enclosure: Full enclosure Robot track: Length: 1,500 mm Travel speed: 60 m/min Repeatability: ± 0.1 mm Positioning table: Working height: 700 mm Max. load capacity: 500 kg Rotary axis: ± 720° Tilting axis: ± 90° Laser source: Type: YLS4000-S2T Wavelength: 1,070 – 1,080 μm Laser power: 4 kW Control: Type: Amada Display: 15” LCD colour touchscreen Controlled axes: Robot and linear axis Coordination between robot and laser source Memory: 3 MB SRAM I/O interface: LAN, USB Welding Head: Amada Focus position adjustment: -10 mm to 50 mm CCD camera for TAS system included as standard Optical weaving included as standard Cross jet nozzle included as standard Coaxial nozzle included as standard Welding wire feed: 0.8 to 1.6 mm Weaving System: The integrated rotary optics allow the laser beam to move in a circular pattern. The patented system by AMADA enables welding of larger gaps with or without filler material and even allows welding of aluminum. NC Focus System: The NC Focus System automatically sets the optimal focus position for the specific welding condition. It supports welding simple butt joints as well as hard-to-reach corners. Filler wire and intelligent gas supply: Up to 20 kg of filler wire can be used. When using the TAS (Teach Assistant System), the gas nozzle retracts automatically. TAS (Teach Assistant System): The TAS system eliminates time-consuming manual teaching operations. Deviation between the programmed and actual weld path is detected using a CCD camera. Condition: Very good condition Machine has been used very little: approx. 16,500 operating hours. The seller is not liable for typographical or data transmission errors. The machine’s appearance, technology, and wear are commensurate with its age; used machines are sold without any warranty.

Condition: used, CNC Press Brake AMADA Type HFBO 50 x 2000 Serial No. HFBO 50 20 S60906 Year of manufacture: 1996 Press brake with 8 axes - CNC control Operator II Pressing force: 50 tons Working length: 2090 mm Stroke: 200 mm Frame depth: 420 mm Distance between side frames: 1660 mm Ljdpfsw Iq Ugsx Affoak Max. tool installation height: 460 mm Table width: 60 mm Table height above floor: 910 mm Motor power: 4.5 kW Mains connection: 400 Volt, 50 Hz, 20 Amp. - 8-axis CNC control Operator II (Y1-Y2 / X1-X2 / Z1-Z2 / R1-R2) - 2 freely programmable backgauge fingers, movable laterally and in height (Z1+Z2+R1+R2) - Press beam with servo valves and measuring system Y1 and Y2 - Operation via electric foot switch and/or two-hand control panel - Mechanical lever-style tool clamping for the upper tool (5 AMADA Expert, 5 UKB 50.667 H=120 mm) - Tool holder for lower tool, 60 mm wide - 11-piece upper tool set, 30°, total length 1675 mm - consisting of: 1x 835 / 1x 300 / 1x 165 / 1x 50 / 1x 45 / 1x 35 / 1x 20 / 1x 15 / 1x 10 / 2x 100 mm (end pieces) in length - 2-piece lower tool, 88° - V8, total length 1250 mm - consisting of: 1x 835 / 1x 415 mm in length - Indicated operating hours: 30,537 h - Operating manual, electrical diagram, spare parts book included Weight: 4,700 kg Good condition

Condition: used, Year of construction: 1995, Used notching machine from FIM (Amada branded) Type: Goal 204 Laedpfx Afewr Aakjfek Capacity: 200 x 200 x 4 mm 90 degree angle Year of manufacture: 1995

Condition: refurbished (used), functionality: fully functional, Shear Brand: AMADA PROMECAM Model: GP1230 Capacity: 3000 x 12 Back gauge: 1000 mm Lasdpfx Aexfbb Rsffsk Rear pneumatic sheet support Cylinder seals replaced – Blades sharpened – In compliance

Condition: good (used), Year of construction: 1994, working width: 1,200 mm, pressing force: 25 t, working range: 1,200 mm, High Quality Used AMADA PROMECAM ITS2 25-12 1.2metre x 25ton cnc pressbrake for sale Lodpfx Afsrhirzjfeak Year 1994 Specification 25 TONS X 1250 HYDRAULIC UP STROKING 3 AXIS CNC PRESS BRAKE COMPLETE WITH HURCO AUTOBEND 7 CNC CONTROL description TYPE HYDRAULIC UPSTROKING CONTROL HURCO AUTOBEND 7 BENDING PRESSURE 25 TONS BENDING LENGTH 1250 STROKE LENGTH 100 TABLE WIDTH 60 NO. OF AXIS 4 AXIS CONFIGURATIONS Y X AND R SIDE FENCING REAR INTERLOCKED

Condition: used, Year of construction: 1981, cutting diameter 250 mm dimensions of saw-band 3505 x 25 x 0,95 mm table height 450 mm cutting speed 10 - 110 m/min total power requirement 3 kW weight of the machine ca. 1,1 t dimensions of the machine ca. 2,0 x 2,2 x 1,4 m Lodov Ehfaepfx Affeak Fully automatic band saw - including chip conveyor

Condition: excellent (used), Year of construction: 2001, Technical Specifications: Working length: 4230 mm Frame gap: 3760 mm Press force: 170 t CNC control: AMADA Operator Number of controlled axes: 5 Motorized adjustable backgauge Throat depth: 600 mm Stroke: 350 mm Working height: 960 mm Motor power: 16.5 kW CE marking Dimensions (L x W x H): approx. 4700 x 2200 x 2900 mm Lajdpfxoxhf D Us Affek Weight: approx. 14.8 tonnes Accessories: Side-mounted movable safety guards The seller assumes no liability for typographical or data transmission errors. The machine's appearance, technical condition, and wear are consistent with its age; used machines are sold without any warranty.

Condition: ready for operation (used), functionality: fully functional, Year of construction: 2008, operating hours: 12,800 h, machine/vehicle number: 45881238, control type: CNC control, degree of automation: automatic, actuation type: electric, laser type: CO₂ laser, sheet thickness steel (max.): 10 mm, sheet thickness stainless steel (max.): 8 mm, sheet thickness aluminum (max.): 3 mm, power: 2 kW (2.72 HP), Equipment: CE marking, cooling unit, documentation/manual, dust extraction, nozzle changer, Working area 2520×1550×300 mm • Table load 330 kg • Ball-screw drives Max thickness: mild steel 10 mm, stainless 8 mm, aluminium 3 mm Machine dims 5745×2630×2789 mm • Weight 7.5 t Lasdpfx Afoxgm Tzofsk

Condition: good (used), Year of construction: 2005, Gebruikte 3 meter Amada CNC kantbank Type: HFP 130 3 Capaciteit: 3100 x 130 ton 8-assig (Y1, Y2, X1, X2, R1, R2, Z1 en Z2) Bouwjaar: 12-2005 Automatisch Fiessler Alas lasersysteem Laodpfxjwz I Irj Affek Euro-stijl gereedschapsklemming met laswisseladapters

Condition: excellent (used), Year of construction: 2005, pressing force: 50 t, Hydraulic press brake Fab. AMADA Typ. HFP 50-20 Year 2005 Technical data Make: AMADA Type: HFP 50-20 Year of construction: 2005 Effective length: 2090 mm Capacity: 50 t Passage upright: 1,665 mm Stroke: 200 mm Projection: 400 mm Installation height: 470 mm Motor power: 6 kW Dimensions: approx. L 2.95 x W 1.60 x H 2.45 m Weight: approx. 4.8 t Equipment - Controlled axles: Y1, Y2, X, R, Z1, Z2 - FIESSLER light barrier at the front - Amada upper tool clamping - CNC control 3D AMNC graphics Ledpfjtzcxpox Affsak - Rear safety guard (hinged mesh doors) - Swivel operation - front left - Tools: o Upper tool straight, R 0.8mm, H 117mm, length 2,000 mm o Bottom tool V10/88°, length 2,000 mm All data without guarantee. A demonstration under power is possible at any time in our exhibition hall.

Condition: used, Year of construction: 2001, pressure 50.0 t chamfer lenght 2090 mm distance between columns 1665 mm column arm 400 mm table width 60.0 mm ajustment speed 100 mm/sec working feed 10.0 mm/sec return speed 92.0 mm/sec stroke 200 mm table height 910 mm dayligth 470 mm Number of working hours 36.160 h total power requirement 6.0 KW weight of the machine ca. 4850 kg range L-W-H 3458 x 2450 x 2450 mm with only approximately 36.160 operating hours (!!) - Inspected condition - Machine video - ?v=x8Z0h2_wA6s Equipment: - CNC electro-hydraulic press brake - CNC control type OPERATEUR 2 with 8 axes (X1+X2, Y1+Y2, R1+R2, Z1+Z2) * CNC-controlled backgauge adjustment (X-axis) * CNC-controlled vertical adjustment of the stop fingers (R1+R2) * CNC-controlled left-right adjustment of the stop fingers (Z1+Z2) * Hand control unit for manual axes movement * Pivoting control, front left - AMADA/PROMECAM quick clamping system for the upper tool Laedpfx Afsxabutsfjk * 1 split set of offset upper tools (UKB 10.512) - AMADA/PROMECAM bottom tool holder * 1x split set of 1-V dies (UKB 20.810) - Side guards (hinged doors) - Rear guards (hinged door) - CE marking - 1x freely movable double foot switch - Operating instructions (PDF)