Used Turning And Milling Centre for sale (23,704)

Condition: used, Year of construction: 2013, turning diameter . mm turning length 2000 mm control Siemens 840 D sl mainspindle: turning speed max. 3800 1/min Hsdpfjvu E R Sex Ahvefd mainspindle: torque max. 1200 Nm diameter of quill 140 mm center point MK6 quill power 5 - 30 kN feed rate Z-axis mm/min rapid traverse Z-axis 40 m/min feed rate X-axis - mm/min rapid traverse X-axis 25 m/min total power requirement 125 kW weight of the machine ca. 20 t The machine can still be inspected under power at the production plant. The condition of the machine is good, the accuracy during turning operation is very good. The milling drive is not functional. A quotation from Niles for the repair of the milling drive is available on request. Including hydraulic steady rest.

Condition: used, Year of construction: 2001, Lot consists of: (1) CNC Lathe Hjdpjym Rlvjfx Ahvefd Technical Details: X/Z 210/610 mm, 12-position tool turret / all positions driven (4,000 rpm), tailstock, C-axes, spindle speed 3,600 rpm, spindle bore 65 mm, coolant unit with KNOLL chip conveyor, and two drawer cabinets with accessories (no warranty of completeness) The machine is currently in storage. Images shown do not necessarily reflect its current condition while in storage.

Condition: used, Year of construction: 2006, Lot consists of: (1) CNC Lathe Hfsdpfxsym Rlcs Ahvjd Technical Details: Lot includes 1 x Spinner CNC lathe, an assortment of tools, and 1 x tool cabinet with contents (contents may vary). Tech. specs of the lathe: Max. turning diameter: 430 mm; distance between centers: 730 mm; Turret capacity: up to 12 driven tools; Control type: Fauc 21 i. The machine is currently in storage. Images shown do not necessarily reflect its current condition while in storage.

Condition: good (used), Year of construction: 2003, Ref. -No.: 10454 Manufacturer: DOOSAN Type: DAEWOO PUMA 300 MSC Year of construction: 2003 Type of control: CNC Control: FANUC 18i-TB Storage location: Halberstadt Country of origin: South Korea Machine-No.: 0MS19XX Turning Speeds: 4500 RPM Bar passage: 62 mm Turning Length: 595 mm Turret places: 12 Pcs Further information: - 4 axes (X/Z/C/B) - counter spindle - driven tool station - finished part removal system - conveyor belt Hedpfx Ahjym Nbvevsfd - chip conveyor - Powercool coolant system - LNS Quickload Servo 3 bar loader - tool holder - collet holder - collets Machines can be inspected under power by appointment.

Condition: good (used), Year of construction: 2010, Ref. -No.: 10287 Manufacturer: DMG Type: DMC 210 FD Year of construction: 2010 Type of control: CNC Control: Heidenhain Mill Plus Storage location: Halberstadt Country of origin: Deutschland X-Travel: 2100 mm Y-Travel: 2100 mm Z-Travel: 1250 mm Machine length: 11.000 mm Machine width: 5.000 mm Machine Height: 3.500 mm Max. Workpiece diameter: 2500 mm Max. Workpiece Weight: 6.000 kg Max. rotary table diameter: 1.850 O Table speed range: 250 min/-1 Tool Taper: HSK-A100 Tool Piece Magazine With: 183 Pcs./pcs. Spindle Speed: 12.000 RPM Max. Torque On The Boring Spindle: 288 Nm Max. Torque: 2.000 Nm Feed Speeds X/Y/Z Axis: 30.000 mm / min Max. Workpiece height: 1.460 mm axes: 5 Further information: Turning and milling center incl. pallet changing system Gear spindle Hfedpfxsym I U Io Ahvod Coolant treatment system, with belt filter, 710 x 50mm 1 Knoll 600S2 chip conveyor 2 Losma oil mist extraction units 1 steel platform (storage space for clamping device): 5,300 x 2,900 mm - Axes renewed 11.2024 - New encoder, electrical components renewed - Geometry protocols available Machine is still in production and under power. The machine can be viewed at any time by appointment.

Condition: used, Year of construction: 2003, Technical details: Hsdpfx Ahex Dlhlovsfd turning diameter: 270 mm turning length: 710 mm weight of the machine ca.: 6,5 t max. swing diameter: 590 mm with automatic loading and unloading system, chip conveyor G300 with "spindle bore clamping capacity 90mm" in tailstock version The machine has no driven tools. The information in the circuit diagram refers to the rotary drive for indexing the turret, not to driven tools. *

Condition: not inspected (used), Year of construction: 2007, operating hours: 43,558 h, functionality: unexamined, machine/vehicle number: 07400003691, turning diameter: 120 mm, spindle speed (max.): 5,000 rpm, spindle bore: 118 mm, controller model: SIEMENS SINUMERIK 840 D POWERLINE, distance between spindles: 900 mm, No reserve price – guaranteed sale to the highest bidder! Submitting a bid obligates the buyer to collect the item within the specified time frames: either between 11/05/2026 and 13/05/2026 or between 18/05/2026 and 21/05/2026! TECHNICAL DETAILS Maximum main spindle speed: 5,000 rpm Maximum sub spindle speed: 3,200 rpm Swing diameter: 270 mm Turning diameter: 120 mm Maximum bar diameter: 100/104 mm Spindle bore diameter: 118 mm Distance between spindles: 900 mm Travel X1-axis: 290 mm Travel Z1-axis: 650 mm Travel X2-axis: 180 mm Travel Z2-axis: 650 mm Travel Y1-axis: ±40 mm Travel Z3-axis: 670 mm Travel X3-axis: 175 mm Rapid traverse X/Z-axis: 30 m/min Rapid traverse Y-axis: 15 m/min Number of tool turrets: 2 Number of tools per turret: 12 All tool positions are driven MACHINE DETAILS Control system: SIEMENS SINUMERIK 840 D POWERLINE Dimensions & Weight Dimensions (L x W x H): 5,500 x 2,500 x 2,500 mm Machine weight: 11,000 kg Operating hours: 88,040 h Spindle hours: 43,558 h EQUIPMENT Chip conveyor Foot switch Note: The machine has the following defects: - The B-axis is defective (located on turret 1) - The guideways and drives are worn in line with the machine’s age - The X2-axis (guide rails) runs slightly out of alignment in the range of 0.03 mm (re-measurement required) - Setting the reference values for the axes in the control system is not functioning - The hydraulic pump was replaced by a spare pump after failure and is now set up externally as a separate unit Hfedpfeym A S Iox Ahvod External reference: Bilstein - Lot 2

Condition: not inspected (used), Year of construction: 2008, operating hours: 39,361 h, functionality: unexamined, machine/vehicle number: 07510001241, turning length: 1,185 mm, turning diameter: 640 mm, spindle speed (max.): 12,000 rpm, workpiece weight (max.): 150 kg, controller model: SIEMENS SINUMERIK 840 D, No minimum price – guaranteed sale to the highest bidder! By placing a bid, you are obliged to collect the item within the specified timeframe, either between 11/05/2026 and 13/05/2026 or between 18/05/2026 and 21/05/2026. TECHNICAL DETAILS Swing diameter: 640 mm Maximum turning diameter: 640 mm Maximum turning diameter (sub spindle): 400 mm Spindle distance: 1,500 mm Turning length: 1,185 mm Max. workpiece weight: 150 kg Slide travel X1: 550 mm Slide travel Y1: 180 mm Slide travel Z1: 1,185 mm Slide travel B1: 240° Slide travel X2: 180 mm Slide travel Z2: 1,050 mm Slide travel Z3: 1,150 mm Hfodpeym A D Rjfx Ahvod Max. milling spindle speed: 12,000 rpm Max. main spindle speed: 4,000 rpm Max. sub spindle speed: 3,200 rpm Rapid traverse rate, Slide 1 (X/Y/Z): 40 / 24 / 70 m/min Rapid traverse rate, Slide 2 (X/Z): 24 / 36 m/min Rapid traverse rate, Slide 3 (Z): 36 m/min Tool holder: HSK 63 Number of tool positions in chain magazine: 40 MACHINE DETAILS Control: SIEMENS SINUMERIK 840 D Dimensions & Weight Dimensions (L x W x H): 7,800 x 4,100 x 3,040 mm Machine weight: 16,500 kg Operating hours: 72,899 h Spindle hours: 39,361 h Bar feeder Model: COCCHE GIOVANNI CNC-DB 110 Year of manufacture: 2008 Serial number: CNCDB-08.306 Weight: 1,500 kg Note: The machine has the following defects: - The hydraulic unit is faulty and requires repair. - The Q2 axis (milling spindle tool changer) fails more frequently. - The X2 axis (guideways) moves slightly askew. - The guideways and drives show age-appropriate wear. External Reference: Bilstein – Lot 1

Condition: ready for operation (used), Year of construction: 2015, operating hours: 5,381 h, functionality: fully functional, machine/vehicle number: AS0211, spindle speed (max.): 5,000 rpm, travel distance X-axis: 180 mm, travel distance Y-axis: 90 mm, travel distance Z-axis: 704 mm, controller model: FANUC SERIES 31 i-MODEL A, No minimum price – guaranteed sale to the highest bidder! Placing a bid obligates you to collect the machine within the specified periods: either between 11.05.2026 and 13.05.2026 or between 18.05.2026 and 21.05.2026. TECHNICAL DETAILS TRAVEL DISTANCES X1-axis: 180 mm X2-axis: 180 mm Y1-axis: ±45 mm Z1-axis: 704 mm Z2-axis: 620 mm E2-axis: 720 mm Rapid traverse X/Y/Z-axis: 30 m/min SPINDLE 1 Max. speed: 5,000 rpm Spindle nose: A6k Spindle bore: 65 mm Draw tube bore: 65 mm Chuck diameter: 210 mm Drive power: 24 kW SPINDLE 2 Max. speed: 7,000 rpm Spindle nose: Ø 110 mm Spindle bore: 42 mm Draw tube bore: 42 mm Chuck diameter: 140 mm Max. chuck jaw weight: 1.25 kg Output power: 16.5 kW Max. speed for driven tools: 8,000 rpm Number of tool turret stations 1: 12 Number of tool turret stations 2: 10 All tool positions are driven MACHINE DETAILS Control: FANUC SERIES 31 i-MODEL A Operating voltage: 400 V Frequency: 50–60 Hz Rated current: 80 A Dimensions & Weight Installation dimensions (L x W x H): 4,500 x 2,400 x 2,400 mm Machine weight: 9,000 kg Read operating hours: 5,381 h EQUIPMENT Chip conveyor by KNOLL Hfjdpfx Aheym Ai Hovod Tool holders (as shown in the photos are included) External reference: Dürr

Condition: excellent (used), Year of construction: 2006, Doosan Puma 700L Turning Centre with Fanuc Series 21i-TB CNC Control, 600mm Diameter Powered 3 Jaw Chuck, Hedpeyrf Tfsfx Ahvjfd 3000mm Between Centres, Swing 1030 mm Turning dia 900 mm Fixed steady included Chip conveyor Spindle motor 45 kw Power requirements 62.2 kva Weight 22 ton Dims 7.1 x 2.2 x 2.2 m 10 Position Tool Turret, Tailstock, Machine Weight 21500kg. S/No. P60L0377 (2006)

Condition: excellent (used), Year of construction: 2008, DMG CTX 510 Sinumerik 840D Hsdpfjr Ak S Nsx Ahvofd Machine in perfect condition, equipped with bar feeder and C axis Spindle operating hours: 6720 Spindle bore: 95 mm Collet chuck Forkardt D=100 mm max; I also have a brand new Hainbuch SK100 collet chuck for this machine Tool holder VDI 40

Condition: used, Year of construction: 2019, machine/vehicle number: IntNr231494, FANUC, high-performance computer series 31i-B5, Well maintained, approx. 9,000 operating hours Technical Main Data Working Range Max. bar diameter: 38 mm Max. machining length (with guide bushing): approx. 320 mm Machining without guide bushing possible (for shorter workpieces) Max. collet diameter at sub spindle: 38 mm Hodpfxsymmkbo Ahvjfd Main Spindle Spindle power: approx. 11–15 kW Max. speed: approx. 7,000 rpm Integrated C-axis (0.001° resolution) High-precision spindle bearings for heavy-duty machining Sub Spindle Power: approx. 5.5–7.5 kW Max. speed: approx. 7,000 rpm Full-function C-axis Part transfer and rear machining in one setup Axis Configuration X1 / Z1 (main system) X2 / Z2 (sub spindle system) Y-axis for off-center milling operations C-axis on main and sub spindle Optional B-axis type swivel functions (depending on equipment) Multi-channel control enables simultaneous machining on main and sub spindle for significantly reduced cycle times. Tooling Tool holder set (non-driven) Guide bushing unit (pull system, JBS) Oil cooler unit High-pressure conveyor (with integrated high-pressure unit), type Müller combistream CS 3 Coolant: oil Weight: 6.25 t Dimensions (LxWxH): 3477x1860x1865 mm The machine can be inspected under power by appointment. Subject to changes and errors in technical data and specifications as well as prior sale!

Condition: good (used), Year of construction: 2014, functionality: fully functional, Technical details turning diameter - mm turning length - mm control M 730 BM Additional information CNC control: M 730 BM Center distance: 500 mm Main spindle: Speed: 5000 rpm Power: 15/11 kW (15% duty cycle / constant) Bar diameter: 65 mm Sub spindle: Speed: 6000 rpm Hsdpoyml Dmsfx Ahvefd Power: 11/7.5 kW (25% duty cycle / constant) Turret: 12 stations Tool spindle speed: 10000 rpm Power: 5.5/3.7 kW (5 minutes / constant) Y-axis travel: +/- 50 mm Equipment: Machine with gantry loader: Left-hand installation, 14-station storage, 20-pallet workpiece storage, Double gripper conveyor 3-jaw hydraulic KITAGAWA power chuck, 210 mm diameter High/low pressure chuck system for main and counter spindles MABEO high-pressure pump with 1.5 MPa filter unit Coolant gun Coolant sprayer on the chuck for main and counter spindles Coolant sprayer for the machine bed cladding Oil mist separator Hinged belt chip conveyor Renishaw workpiece measuring system with optical signal transmission, counter spindle Cooling of the ball screw in the X-axis

Condition: used, Year of construction: 1993, CNC Lathe Hedeyq R T Iepfx Ahvefd Monforts RNC 4 with KNCS 260 chuck Collet up to Ø 60 mm Bar feeder up to Ø 65 mm Year of manufacture: 1988 Lots of accessories CNC Lathe Monforts RNC 4 with 15-series control and C-axis, KNCS 260 chuck, year 1995, lots of accessories RNC 5 Chucking-only lathe Year of manufacture: 1992 Includes many jaws Monforts RNC 7 with automatic tailstock, 1500 mm Z-axis travel Driven tools with spindle indexing every 2.5° Chuck 500 mm, many tools and jaws included Year of manufacture: 1993 Very good condition The last CNC lathe, an RNC 7-1000 with automatic tailstock, steady rest, C-axis Lots of tools and jaws Ideally, everything would be sold as a package — 5 Monforts lathes with a very large amount of accessories.

Condition: used, functionality: unexamined, Iemca BOSS 545E/32 Chip conveyor Hfodpfxjyq Rg Ij Ahvsd

Condition: used, Year of construction: 2006, functionality: fully functional, Iemca BOSS 545E/32 Equipment Hodpfxoyq Rdgj Ahvsfd

Condition: excellent (used), Year of construction: 2018, operating hours: 3,970 h, functionality: fully functional, turning diameter: 32 mm, spindle speed (min.): 8,500 rpm, type of input current: three-phase, General Machine / Workpiece Data: Type: Swiss-type automatic lathe (8-axis configuration: 6 linear axes + 2 C-axes) Hfsdpfexwvgrox Ahvsd Control: FANUC 32i-B CNC with 10.4″ colour display Max. bar stock diameter (main spindle): 32 mm (1.3 in) Max. bar stock diameter (counter spindle): 32 mm (some versions support up to 38 mm with optional components) Max. workpiece length: ~240 mm (9.4″) Axes & Travels: Linear axes: 6 axes (X1, Z1, Y1, X2, Z2, Y2) C-axes: 2 (main and counter spindle) X-axis travel: ~70 mm (2.8″) Y-axis travel: ~405 mm (15.9″) Z-axis travel: ~100 mm (3.9″) Spindles: Main spindle: Max speed: ~8,500 rpm Power: ~5.5 kW (7.4 hp) Torque: ~40 Nm (29.8 ft-lb) Tooling Total tool stations: up to ~41 (configurable) Driven tools: 8 standard driven tool stations (capable of up to ~6,000 rpm) Simultaneous machining: support for up to 2 tools working at the same time Max bar passage ~33–36 mm Coolant tank ~520 L capacity

Condition: good (used), Year of construction: 2008, Description: Hfjdeyq Il Ispfx Ahvjd The machine is in good technical condition, with the possibility of testing upon prior agreement. Spindle bore 65 mm. 38,444 operating hours, with the spindle accounting for approximately 1/3 of the machine’s hours. Yes, it is a Sinumerik control. Chuck: SCHUNK ROTA THW plus 215-65.

Condition: good (used), Year of construction: 2011, Description: Hfodpfx Ahsyq Ifzevod The machine is in good technical condition; a test run is possible after prior agreement. Max diameter: 65 mm, max length: 590 mm. Number of tools: 12. Power: 50.44 kVA. Machine specifications: Machine dimensions (L x W x H): Max D 65 mm, max L 590 mm.

Condition: good (used), Year of construction: 2015, functionality: fully functional, Machine parameters: Machine dimensions (L x W x H): D max. 51 mm, L max. 120 mm Description: Hfjdpeyq Iaxefx Ahvsd The machine is in good technical condition; test operation is possible by prior arrangement. 54.7 kVA Number of tools: 12

Condition: excellent (used), Year of construction: 2003, functionality: fully functional, Hurco VM1 CNC milling machine, Vertical centre Good condition. Can be tested at work in our workshop. YEAR OF MANUFACTURE: 2003 Control: Hurco Max Control Spindle taper: CAT 40 Positions on tool changer: 16 X-axis travel: 660 mm Y-axis stroke: 356 mm Z-axis stroke: 457 mm Table dimensions: 762 mm x 356 mm Maximum weight on table: 340kg Spindle speed: 8000 rpm Electrical connection: 400V Hfedpfjyq Huhjx Ahvod Dimensions: Length: 2100mm Width: 1850mm Height: 2400mm Weight: 3500kg

Condition: excellent (used), Year of construction: 2009, operating hours: 87,000 h, functionality: fully functional, turning length: 600 mm, turning diameter over cross slide: 410 mm, spindle speed (min.): 22,000 rpm, For sale is a CNC turning center manufactured by DMG, model CTX beta 800, year of manufacture 2009. The machine is in a well-maintained and fully operational condition. Technically flawless and immediately ready for operation. Technical Data Machine type: CNC Turning Center Manufacturer: DMG Model: CTX beta 800 Year of manufacture: 2009 Control system: Heidenhain 4290 Max. turning length: 600 mm Tool turret: 12-position Tool holder: VDI 40 Operating hours: approx. 87,000 h Spindle hours: approx. 22,000 h Linear guide Z1 recently renewed Turret drive S2 recently replaced Machine regularly serviced by customer service Technically flawless and fully functional Inspection under power possible by appointment Service and maintenance reports available Extensive accessory package Driven tools by WTO Further documentation and photos available on request Availability: from July 2026 If interested, simply write or call Maschinenhandel Nord Gerstenstraße 2 Hfjdpfx Aheyq Hq Nsvjd 17034 Neubrandenburg

Condition: ready for operation (used), Year of construction: 2002, functionality: fully functional, Tool holder VDI 40 Driven tools Side machining Bar loader / Irco 3 meter - up to diameter 50 mm ICS yes Hedpfxowqp S Do Ahvefd Heidenhain probe Memory slots 12 pieces Parts catcher Chip conveyor Handwheel Foot switch

Condition: used, Year of construction: 1998, turning diameter 850 mm turning length 2000 mm turning diameter over slide rest 690 mm control Siemens type 840 C Cooling through the spindle 23 bar Hodoyqv Anspfx Ahvofd centre height 450 mm spindle diameter in front bearing 200 mm spindle hollow 128 mm power capacity 60 kW turning speeds 7-1800 U/min Torque 7908 Nm workpiece weight 4000 kg tailstock quill diameter 160 mm tailstock quill taper MT 5 3 jaw chuck Forckrath 600 mm Tool changer 60 work piece power 30 kW turning speeds 56-3000 U/min weight of the machine ca. 18 t dimensions of the machine ca. 6,3x2,4x3,3 m The machine has been completely overhauled. Capto C6 milling chuck Double prism lathe chuck The machine has many optional accessories that can be purchased separately. The tech. Data are manufacturer or operator information and therefore non- binding. We reserve the right to prior sale; Our terms and conditions of sale apply exclusively. About us More than 400 of our own machines in stock Over 15,000 m² of storage space, 70 t crane capacity More than 10,000 items and accessories for your workshop If you are interested in selling machines, production lines, or your business, please contact us. You can find further offers on our website. Tours are possible by appointment. We look forward to your visit. Your Markus Hirsch Team

Condition: used, Year of construction: 1997, turning diameter 400 mm turning length 1250 mm control Siemens type 840 C Hsdpfoyqvwfox Ahvjfd swing diameter 590 mm turning speeds 3500 U/min Torque 275/178 Nm spindle passage 50/65 mm clamping chuck diameter 250 mm output 43/28 kw Tool changer 80 Pos. tool taper Capto C 4 Counter spindle 3500 rpm Flexible head 1500/6000 rpm (2 gear ratios) Head with 4 stations (2 fixed stations for turning/2 milling stations) Power 9.4 kW Travel 1250 mm Spindle head ISO 702/1 size 8 (HSP) size 6 (GSP) The tech. Data are manufacturer or operator information and therefore non- binding. We reserve the right to prior sale; Our terms and conditions of sale apply exclusively. About us More than 400 of our own machines in stock Over 15,000 m² of storage space, 70 t crane capacity More than 10,000 items and accessories for your workshop If you are interested in selling machines, production lines, or your business, please contact us. You can find further offers on our website. Tours are possible by appointment. We look forward to your visit. Your Markus Hirsch Team