Used Turn Cross for sale (11,221)

Condition: used, 1 unit CNC turning center with two spindles and two turrets, MAZAK MULTIPLEX 420, including tool holders, clamping devices and cutting tools, 3x storage racks, 3x tool cabinets, as per images and inspection, self-dismantling required. Color: green. Dimensions L/W/H: 100x40x28 cm. Condition: used. Storage location: production hall / left side. Payment method: advance payment via bank transfer. Shipping: Collection only – no shipping offered for this item! Ncodpfsyr Hzkox Ahvjp

Condition: used, Year of construction: 2015, turning diameter max. 315 mm Ncedpevxwrcefx Ahvep swing diameter 315 mm turning height 175 mm Control SIEMENS 840 D SL x-travel 660 mm z-travel 300 mm turning speeds 7500 U/min tool change unit 12 fach VDI 40 total power requirement 36 kW weight of the machine ca. 7,5 t dimensions of the machine ca. 4,4 x 2,2 x 2,7 m Renishaw LP2H Chip conveyor No chuck available No tool holders available No live tooling

Condition: good (used), Year of construction: 2010, TECHNICAL DATA - Number of axes: 10 - Number of spindles: 2 MAIN SPINDLE - Max. bar diameter: 26 mm - Travel: 240 mm - Spindle speed: 8,000 rpm - Spindle drive power: 7.5 kW - Minimum resolution C-axis: 0.1° SUBSPINDLE - Max. bar diameter: 26 mm - Spindle speed: 6,000 rpm TOOL HOLDER 1 - Number of positions: 5 TOOL HOLDER 2 - Number of positions: 5 - Number of driven positions: 4 - Driven tool speed: 6,000 rpm FRONT TOOL POST - Number of positions: 4 - Number of driven positions: 4 - Driven tool speed: 6,000 rpm BACK WORKSTATION - Number of positions: 7 - Number of driven positions: 3 Nedjyuyqkopfx Ahvecp - Driven tool speed: 6,000 rpm ELECTRICAL SUPPLY - Supply voltage: 400 V MACHINE HOURS - Operating hours: 56,433 [hrs.] EQUIPMENT - CNC control: Fanuc - Motorization of driven tools - Driven guide bushing - Workpiece removal - Parts ejector - Chip conveyor - Coolant tank * with high-pressure pump - Number of driven tool holders: 3 - Number of fixed tool holders: 7 - Bar feeder

Condition: excellent (used), Year of construction: 2017, operating hours: 5,816 h, functionality: fully functional, machine/vehicle number: MLO237-000571, turning length: 513 mm, turning diameter: 300 mm, spindle motor power: 18,500 W, spindle speed (max.): 4,500 rpm, travel distance X-axis: 230 mm, travel distance Y-axis: 360 mm, travel distance Z-axis: 580 mm, rapid traverse X-axis: 24 m/min, rapid traverse Y-axis: 200 m/min, rapid traverse Z-axis: 30 m/min, torque: 47 Nm, feed rate X-axis: 24 m/min, feed rate Y-axis: 200 m/min, feed rate Z-axis: 30 m/min, total height: 1,700 mm, bar diameter (max.): 65 mm, quill diameter: 80 mm, quill travel distance: 80 mm, swing diameter over bed slide: 600 mm, overall weight: 3,700 kg, spindle diameter: 210 mm, Equipment: documentation/manual, Explore this excellent condition, robust and versatile DOOSAN PUMA GT 2100M as a high-performance CNC Horizontal Turning Center with powerful Milling capabilities - C-AXIS, designed as a "global standard" machine for high-precision and complex part machining. Equipped with C-AXIS (offering enhanced Milling capabilities) and a generous 513 mm Turning Length, Fanuc I Control unit, 4500 RPM Spindle Speed, and a super robust 18,5 kW Motor, this turning machine offers precision, power and versatility for your turning needs. Committed to quality, durability, and efficiency, this Turning Center equipped with C-AXIS, is integral to various industries, such as aerospace, energy and automotive, meeting the rigorous demands of modern industrial production while maintaining the strong reputation for reliability. Manufacturer: DOOSAN Model: PUMA GT2100M Machine type: CNC Turning and Milling Center (C-AXIS) Condition: Excellent Condition - (Used) - Ready to use Year of construction: 2017 Cutting Time: 5816 hours Nedpjyuyhpjfx Ahvscp Category ID: 1128 Type ID: 2239 If you have any questions or need more information, feel free to send us a message or give us a call. Kind Regards, 0040 733 55 80 41

Condition: good (used), Year of construction: 2006, functionality: fully functional, turning length: 900 mm, turning diameter: 450 mm, Used Okuma Multus B300-W multi-function CNC lathe including newer Kuka robot 70 kg (1–2 years old), without handling set-up. Ncodpfx Ahjyux S Hevep

Condition: ready for operation (used), Year of construction: 2004, functionality: fully functional, bar passage: 32 mm, The following works have been carried out on the machine in recent years: February 2022 – X2 axis ball screw replaced and bearings renewed August 2022 – X2 axis controller replaced September 2023 – Measuring system / controller for Ti axis replaced March 2025 – Measuring system for Ti axis replaced TECHNICAL DETAILS Bar capacity: 32mm EQUIPMENT Ncjdpfx Ahoyux N Eovjp 10 tool stations on turret with Y-axis for front and rear machining 5 gang tool positions 3 tool positions on drilling block for rear machining 4 driven tools for cross operations C-axis main spindle Milling interpolation Cutting radius compensation Synchronous tapping ER16 holders

Condition: new, Year of construction: 2025, Protec welding rotary table 5000 Kg load capacity speed infinitely variable 0,05 - 0,5 rpm manual remote control height 600mm diameter 1500mm Nodpeid Szcofx Ahvocp Foot remote control extra charge

Condition: new, Year of construction: 2024, Protec KT 5000 welding rotary table Complete set incl. double foot remote control and hand remote control with digital display 5000 Kg load capacity Diameter clamping disc 1500mm Height horizontal 1500mm Height tilted to middle 1500mm Speed infinitely variable from 0.01 to approx. 0.7 rpm Inclination up to 120 length 2100mm Ncsdpfefkt Ebex Ahvjp width 1500mm

Condition: new, Year of construction: 2024, table load: 2,000 kg, Welding rotary table 2000 Kg load capacity with hand and foot remote control diameter 1200 mm Ncodegfqk Tjpfx Ahvjp Bore 100mm height 580mm speed stepless 0 - 0,6 rpm Motor AC 380 V

Condition: excellent (used), Year of construction: 2022, Swiss CNC Chucker-Convertible Sliding Headstock Lathe W/ "B" Axis Ncedpeyq S Utefx Ahvjp

Condition: used, Year of construction: 1992, Emco Turn 342 CNC Lathe with Fanuc OT Control, 2 Axis, 125mm Collet Chuck, 8 Tool Turret. S/No. RSG E2ES 002 S, Run Time 3241 Hours, Sameca Bar Feed Type SAM65. S/No. M062103 (1992) includes Autoblok Chuck, Selection of Tooling & Collets. Njdpjyuv Sdofx Ahvecp Location: This lot is located in Birmingham, UK. A charge of £200 for dismantling and loading onto suitable transport will be automatically added to your invoice should you be successful in purchasing this item. Blocking and securing will be at the cost of the purchaser.

Condition: refurbished (used), Year of construction: 2003, functionality: fully functional, turning length: 2,260 mm, turning diameter over cross slide: 690 mm, turning diameter: 690 mm, spindle motor power: 40,000 W, spindle speed (max.): 3,300 rpm, spindle bore: 115 mm, travel distance X-axis: 700 mm, travel distance Y-axis: 300 mm, travel distance Z-axis: 2,260 mm, rotational speed (min.): 4,000 rpm, chuck outer diameter: 500 mm, spindle nose: A11, swing diameter over bed slide: 690 mm, tool length: 500 mm, feed force X-axis: 20,000 N, feed force Y-axis: 20,000 N, feed force Z-axis: 20,000 N, Equipment: rotational speed infinitely variable, Overhauled 5-Axis CNC Turning-Boring-Milling Centre WFL M60 Millturn / 2000mm with control Siemens Sinumerik 840D PL. YOC: 2003 The machine is completely overhauled, fully checked and fully working. The Turninmg -boring-milling und and the tailstock are completely refurbished. Milling spindle and spindle bearings are new. Cables and hydraulic hoses area also new. The machine geometry is within the original protocol values of a new machine (with measuring protocol). The machine is equipped with steady rest slide and tailstock (both with autom. Positioning and extremely rigid hydraulic clamping on the bed. Chuck and steady rest according to customer requirement (brand new items will be included). Chuck dia. Max. 500mm and steady rest max. 380mm opening dia. Tool system is HSK100 (external 90 station magazine with ATC). The machjine is equipped with glass scales for all linear machining axis. Furtthermore the machine is equipped with a 80 bar high pressure pump for deep hole drilling and 2t feed force for Z, X- and Y axis. The B-axis increment is 0.001° and is equipped with and additional indexing system with extremely high torque. Putting into operation and Training can be offered upon request. If rquired the outside colour can be adjusted according to customer requirements. Main spindle: 40kW (S1) Milling spindle: 25kW (S1) 4000rpm Tool system: HSK100 Nodpfsyuu A Iex Ahvscp Magazin: 3x30 Plätze

Condition: excellent (used), Year of construction: 2005, functionality: fully functional, turning length: 1,000 mm, spindle speed (min.): 6,000 rpm, Mazak QTN 200M 1000 mm C axis Ncsdpfeyuuxcsx Ahvep With driven tools

Condition: used, Year of construction: 1998, operating hours: 97,593 h, functionality: fully functional, turning diameter: 65 mm, spindle bore: 79 mm, spindle speed (max.): 4,500 rpm, spindle speed (min.): 25 rpm, For Sale: Gildemeister MF Sprint 65 CNC Sliding Headstock Lathe with 3-Meter Bar Feeder, as shown in the pictures. The machine was removed from our workshop in fully functional condition. A video of the machine in operation prior to disassembly is available upon request. Approximately five years ago, the linear guides of the X1 and Z1 slides (on the main spindle side) were replaced, including bearings and belts. A new HMI interface was installed recently. Detailed specifications and technical data can be found in the attached PDF. TECHNICAL DATA Control: Sinumerik 840C Bar Feeder: SIMAG 65.1-3200G, Year of Manufacture: 1998 Bar Length: 3 meters Bar Diameter / Spindle Bore: 65 mm Main Drive Power Output: 28 / 21 kW Speed Range: 25 – 4,500 rpm Nodpfx Ahewym Nfovecp Torque: 320 / 240 Nm Maximum Feed Rate for Thread Cutting: 10 m/min C-Axis Speed: 120 rpm C-Axis Torque (Holding Torque): 180 Nm Tool Carrier Number of Tool Stations: 8 Shank Diameter (DIN 69880): 30 mm Number of Driven Tool Stations: 4 Power Output: 7.6 / 4.6 kW Torque: 24 / 14.7 Nm Maximum Speed of Tool Carrier 1: 4,000 rpm Maximum Speed of Tool Carrier 2: 4,000 rpm Slide 1 Cross Travel / Longitudinal Travel: 155 / 280 mm Rapid Traverse Speed X/Z: 22.5 / 22.5 m/min Feed Force X/Z: 900 / 900 daN Slide 2 Cross Travel / Longitudinal Travel: 82 / 120 mm Rapid Traverse Speed X/Z: 22.5 / 22.5 m/min Feed Force X/Z: 900 / 900 daN MACHINE DATA Dimensions with Bar Feeder and Chip Conveyor (L × W × H): approx. 6 × 2 × 2 meters Weight: approx. 6.5 tons Operating Voltage: 50 Hz, 400 V Accessories: Cooling System Chip Conveyor Documentation The offer is subject to change and non-binding, changes and errors in the technical data or the equipment, as well as prior sale reserved Used machines are purchased as seen, without warranty claims. Delivery ex works excluding packaging and insurance, unless otherwise agreed. The price does not include statutory value added tax. As is usual with used machines, payment is made before loading.

Condition: good (used), Year of construction: 1999, functionality: fully functional, turning length: 2,500 mm, Mazak INTEGREX 50YR-2500U – Technical Data Machine type: CNC Turning/Milling Center / Multitasking Manufacturer: Mazak Control: MAZATROL PC-Fusion CNC 640MT Ncjdpfxeyuucno Ahvjp Year of manufacture: 1999

Condition: used, Year of construction: 2019, turning diameter over bed 32 mm spindle passage 32 mm control SIEMENS 840-D-SL spindle stroke 220 mm main spindle speeds: 6000 U/min spindle drive 5,5 / 3,7 kW Sub - spindle - bar diameter 32 mm turning speed range sub spindle 8000 U/min turning length 220 mm collets 1536E motor power 5,5 / 3,5 kW total power requirement 16 kVA weight of the machine ca. 4,3 t dimensions of the machine ca. 6,40 x 1,60 x 2,10 m MAIER Swiss lathe in very good condition with SIEMENS 840-D-SL 3-channel control system, equipped with: - 2 counter spindles - NC C-axis on main and both counter spindles - Additional 3rd channel in the form of a second counter spindle - Channel 1 with Y1 and 4 driven tool holders - Channel 2 - Back side machining, tool carrier with 4 driven and 4 fixed tool stations - Tool holders for 4 fixed turning tool holders, cross-section 16 x 16 mm - Bar loading magazine, manufacturer FMB Turbo Ø 3-36 / 3200 C - Stack magazine for holding a complete bundle of bars - Chip conveyor - Electronic handwheel - KNOLL high-pressure system 50 bar with paper belt filter system Ncodpjytx Skjfx Ahvep - Fire protection system, manufacturer KRAFT & BAUER - Table for removing long parts - Removal of long parts (flange + pipe) - ARTIS - Tool and process monitoring “Genior Modular fully automatic tool and process monitoring” The machine can be inspected under power!

Condition: new, neu ca. 3-6 Wochen ab Auftrag Türkei 10400 € 199.68 € 20000 kg 10000 to 750 mm Ncedpfex Urrnsx Ahvjp 4500 mm 300 mm 2 x 70 mm Conventional rotating fixtures are preferred in areas such as welding, painting and paint preparation, due to their cost-effective design and ease of integration. They are manufactured as standard with capacities ranging from 1 to 150 tons. Roller material: Polyurethane Capacities up to 500 tons are also possible upon request.

Condition: new, neu ca. 3-6 Wochen ab Auftrag Türkei 8700 € 167.91 € 10000 kg Nodpfx Ahsx Urrbovecp 5000 to 750 mm 4500 mm 300 mm 2 x 70 mm Conventional rotating fixtures are preferred in areas such as welding, painting and paint preparation, due to their cost-effective design and ease of integration. They are manufactured as standard with capacities ranging from 1 to 150 tons. Roller material: Polyurethane Capacities up to 500 tons are also possible upon request.

Condition: new, neu ca. 3-6 Wochen ab Auftrag Türkei 16000 € 307.2 € 20000 kg 10000 to 900 mm 4500 mm 300 mm 2 x 70 mm Nedpfxex Urq Re Ahvocp Rotatators are used across industries to facilitate production and simplify the assembly of tanks, drums,as well as pressure vessels and cylinders of all types and sizes. They increase speed and efficiency in both automatic and manual welding processes by increasing productivity while minimizing additional work steps and crane use. They allow the operator to control all functions, including clockwise and counterclockwise rotation, with exceptionally smooth and precise speed control. Roller material: Polyurethane Standard rotators currently cover load capacities from 5 to 150 tons. Capacity can be expanded up to 250 to upon request.

Condition: new, neu ca. 3-6 Wochen ab Auftrag Türkei 13200 € 253.44 € 10000 kg 5000 to 900 mm 4500 mm 300 mm 2 x 70 mm Rotatators are used across industries to facilitate production and simplify the assembly of tanks, drums,as well as pressure vessels and cylinders of all types and sizes. They increase speed and efficiency in both automatic and manual welding processes by increasing productivity while minimizing additional work steps and crane use. They allow the operator to control all functions, including clockwise and counterclockwise rotation, Ncjdpfxox Urp To Ahvsp with exceptionally smooth and precise speed control. Roller material: Polyurethane Standard rotators currently cover load capacities from 5 to 150 tons. Capacity can be expanded up to 250 to upon request.

Condition: new, AUMA 07.1-F10 Multi-turn actuator New -Auftragsnr: 23078028 -NR: 2218NS66675 -PTB 01 ATEX 1119 Ncedpfx Asv Uaicshvep -SKE0 56-2/80 -Art nr: Z048.703 - AZ F-3-S-ISO-STD

Condition: ready for operation (used), Year of construction: 2009, General Data Machine weight 2200 kg Measurements height 1752 mm Dimensions Machine Length 2120 mm Main Drive Spindle Speed 8000 RPM This Citizen A20 7PL was manufactured in 2009. It features a max turning diameter of Ø 20 mm and a length of 55/200 mm. Spindle speeds reach up to 8,000 rpm with 21 tool stations and rotary tools at 6,000 rpm. Includes an Iemca Boss 332 E/R bar loader. Dimensions are 2,120 x 1,226 x 1,752 mm, weighing 2,200 kg. Contact us for more information about this machine. Application Types Turning Ncsdpfxsx D Ic Ee Ahvsp

Condition: ready for operation (used), Year of construction: 2001, spindle speed (max.): 4,000 rpm, travel distance X-axis: 205 mm, travel distance Y-axis: 40 mm, travel distance Z-axis: 540 mm, spindle motor power: 18,500 W, total height: 2,050 mm, overall weight: 7,500 kg, product length (max.): 2,975 mm, number of axes: 3, General Data Machine weight 7500 kg Nsdpfx Aox D Icxshvjcp Measurements height 2050 mm Dimensions Machine Length 2975 mm Main Drive Number of axis 3 Spindle Speed 4000 RPM Spindle motor power 18.5 kW Movement X-Axis Movement 205 mm Z-Axis Movement 540 mm Y-Axis Movement 40 mm Technical Specification Counter Spindle yes Driven Tools yes This 3-axis Miyano BNE-64SY horizontal turning machine was manufactured in 2001. It features a main spindle speed up to 4,000 rpm, a sub-spindle with a speed range up to 5,000 rpm, and a spindle bore of 65 mm. Equipped with a chip conveyor, bar feeder, and coolant skimmer, it offers robust functionality for efficient turning operations. If you are looking to get high-quality turning capabilities, consider the Miyano BNE-64SY machine we have for sale. Contact us for more information. Application Types Turning

Year of construction: 2014, operating hours: 25,000 h, condition: ready for operation (used), General Data Machine weight 3900 kg Control Unit Brand FANUC Model 0i-TD Main Drive Number of axis 4 Ncjdpfx Ahjx D I T Rovsp This 4-axis DOOSAN LYNX220LSYA horizontal turning machine was manufactured in 2014. It offers robust performance for precision turning operations. If you are looking to get high quality turning capabilities consider the DOOSAN LYNX220LSYA machine we have for sale. Contact us for more information. Application Types Turning

Condition: ready for operation (used), Year of construction: 2013, operating hours: 15,000 h, Main Drive Spindle speed range 12000 Tool taper Capto C6 Number of axis 5 Movement Y-Axis Movement 230 mm A-Axis Movement 1550 mm Workpiece Workpiece drm over bed 1000 mm This 5-axis DOOSAN Puma MX2600ST turn-mill centre was manufactured in 2013. It features a maximum turning diameter of Ø 760 mm, part length up to 1540 mm, and bar capacity of Ø 76 mm. Equipped with a Fanuc 31i-A control, dual spindles with speeds up to 4000 rpm, and a milling spindle at 12,000 rpm. Includes a tool magazine with 80 positions and a swarf conveyor. Consider the opportunity to buy this DOOSAN Puma MX2600ST turn-mill centre. Contact us for more information. Application Types Njdpfx Aox E Eamehvscp Turning