Used Turbine for sale (324)

Condition: used, Used 2 MW wood biomass power plant built in 2009 and running until February 2023. Plant is made up of a steam boiler that uses forest waste as fuel and a condensing steam turbine generator, electrical room, control room. Main equipment includes: - Biochamm BCV-11.0000 CA biomass boiler built in 2008 with approximately 23,665 hours of use. - Boiler feed system made in 2008 with approximately 22,549 hours of use. - Atlas Copco compressors made in 2008. - Water treatment plant made in 2008. - Hamworthy condenser made in 2008 with 22,539 hours of use. - Siemens SST-110 (TWIN AFA46 GT6) steam turbine made in 2008, with 22,539 hours of use and 563 starts. - Leroy Somer L57 54 m7/41 alternator made in 2008 with 22,539 hours of use. - EWK cooling towers made in 2008 with approximately 23,102 hours of use. - Fivemasa HVAC made in 2008. Gedpfx Asyhc Irob Deit Available for relocation or in-situ with land and buildings.

Year of construction: 2001, condition: used, Technical details: Numbers of turbines: 1 Stck. drum length: 580 mm operating hours: 30.810 h compressed air: 5 - 7 bar filling volume: 100 dm³ total power requirement: 24,2 kW total wight: ca. 5,8 t DRUM - Shotblasting Plant in a closed drum Manual and automatic operation technical specifications: -spinning wheel Ø = 380mm -drum Ø = 1150 mm x length 580 mm -max. filling weight = 220 kg, filling volume 100dm³ -piece size (max. edge length) = 100mm -Turbines 380mm; 15.0 kW -blast media discharge speed approx. 80.0 m/s -Ablast media throughput/turbine approx. 240.0 kg/min. -Steel abrasive grade, nothing else possible! (recommended is: StD-Z 0,6 DIN 8201 HV 700) -Compressed air with cartridge filter system approx. 12 m³/h The plant is not electrically connected. Sale as currently is at the warehouse Leipzig (see last photos). Gijdpfxou Nu Nke Ab Dot Machine has been functional before dismantling. *

Condition: excellent (used), Year of construction: 2014, operating hours: 63 h, functionality: fully functional, fuel type: electric, operation weight: 346 kg, fuel: electricity, IPC GANSOW 1010E SWEEPERS NEW 6V 175Ah GEL BATTERIES (SIAP) (4x) NEW NEOS 24V 20A RECTIFIER NEW, MAIN AIR FILTER 2014 production year New cylindrical brush combined with new side brushes provide excellent sweeping effect Highly efficient dust extraction turbine and new protective rubbers around the main brush prevent fine dust and dirt from rising after sweeping. The machine has a large waste flap for collecting larger waste. The device after a general, detailed renovation, operating fluids and parts such as bearings, drive belts, protective rubbers and filters have been replaced with new ones. Each device we offer has individually taken photos, you buy exactly the machine you see Godpev Aa Afsfx Ab Doit TECHNICAL DATA: Model: IPC GANSOW 1010 E Sweeping width (mm): 700 Sweeping width with two side brushes (mm): 1200 Efficiency with two side brushes (m²/h): 5600 Sweeping speed (km/h): 7 Tank capacity (l): 65 Filter surface (m²): 4 Dimensions L x W x H (mm) 1500 mm x 970 mm x 1200 mm Weight of the machine ready to work (kg) ~ 346 INCLUDED: NEW GEL BATTERIES 6V 175Ah (SIAP) (4x) NEW BATTERIES NEOS 24V 20A NEW, MAIN AIR FILTER NEW roller brush NEW side brushes NEW roller rubber guards 65l waste containers KEY FEATURES: Ergonomically designed cockpit and centrally located operator's seat provide good visibility of the cleaned surface IPC GANSOW 1010 E sweeper is a perfect machine for effective, economical sweeping of multi-level parking lots, warehouses and production buildings as well as outdoor areas Battery power supply provides high flexibility, allowing work also in closed places, buildings, warehouses Large working width (1200mm) ensures high surface efficiency Very legible and intuitive control panel.

Condition: excellent (used), Year of construction: 2011, operating hours: 1,206 h, functionality: fully functional, working width: 960 mm, area performance: 7,200 m²/h, overall weight: 1,567 kg, warranty duration: 12 months, tank capacity: 310 l, HAKO HAKOMATIC B1050 WB960 SCRUBBERS NEW TRACTION BATTERY HAWKER PERFECT PLUS 36V 480Ah (6PZS480) NEW NEOS 36V 50A BALANCER 2011 production year Machine mileage is 1206 hours 960mm cleaning head (WB960) equipped with two new cylindrical brushes, allowing work on any surface New rubber bands, made of high quality natural rubber, are perfect for work on all surfaces. New protective rubbers around the brush head prevent water from splashing outside the machine's outline New Ametek suction turbines ensure high water suction power from the squeegee Each device we offer has individually taken photos, you buy exactly the machine you see TECHNICAL DATA: Working width (mm): 960 Squeegee width (mm): 1260 Efficiency (m²/h): 7200 Width without squeegee / with squeegee (mm): 1130/1260 Voltage (V): 36 Number of cylindrical brushes (pcs.): 2 Working speed (km/h): 7.5 Clean water tank capacity (l): 310 Dirty water tank capacity (l): 310 Weight without batteries (kg): 713 Weight of the machine ready for operation (kg): 1567 Power (kW): 4.37 INCLUDED: NEW TRACTION BATTERY HAWKER PERFECT PLUS 36V 480Ah (6PZS480) NEW RECTIFIER NEOS 36V 50A NEW Ametek suction turbines NEW cylindrical brushes - PPL 0.7 Suction strip with new rubbers Tenzi Normal 5L liquid - FREE KEY FEATURES: A 310-liter tank allows you to pour a large amount of cleaning solution, so you don't have to stop work often to refill it Thanks to its design, the machine is very maneuverable. A small turning radius allows you to work also in narrow passages and alleys. The parabolic squeegee beam ensures precise suction of the solution from the cleaned surface The ergonomically designed cockpit and the centrally located operator's seat provide good visibility of the cleaned surface The large working width (960 mm) ensures high surface efficiency A very legible and intuitive control panel. Gisdpfx Asvnacvsb Dot

Condition: excellent (used), Year of construction: 2014, operating hours: 2,275 h, functionality: fully functional, working width: 750 mm, area performance: 4,200 m²/h, overall weight: 391 kg, tank capacity: 72 l, HAKO SCRUBMASTER B70 CL TB750 SCRUBBER NEW GEL BATTERIES 6V 175Ah SIAP (4x) 2014 year of production The machine's mileage is 2,275 hours 750mm cleaning head (TB750) equipped with two new medium-hardness disc brushes, enabling work on any surface. New polyurethane astringent rubbers, resistant to contact with oil liquids, greases and petroleum substances. The built-in battery charger and wheel drive make everyday operation easier The new protective rubber around the brush head prevents water from splashing beyond the outline of the machine The device is equipped with a new, durable drain and suction hose The new suction turbine ensures high water suction power from the squeegee bar Each device we offer has individually taken photos, you are buying exactly the machine you see TECHNICAL DATA: Supply voltage (V): 24 Working width of brushes (mm): 750 Working width of the suction nozzle (mm): 1100 Theoretical capacity (m²): 4200 Working speed (km/h): 5 Tank capacity (l): 72/74 Weight (kg): ~391 Power (kW): 2.28 INCLUDED: NEW GEL BATTERIES 6V 175Ah SIAP (x4) NEW disc brushes 380mm PPL 0.5 Built-in battery charger Suction strip with new oil-resistant rubbers Gisdper Ncyqofx Ab Djt Tenzi Normal 5L liquid - FREE THE MOST IMPORTANT FEATURES: The 72 liter tank allows you to pour a large amount of cleaning solution, so you don't have to frequently stop working to refill it. Thanks to its design, the machine is very maneuverable. The small turning radius also allows work in narrow passages and alleys. The parabolic squeegee beam ensures accurate suction of the solution from the cleaned surface The large working width (750mm) ensures high surface efficiency Very clear and intuitive control panel.

Condition: reconditioned (used), functionality: fully functional, working width: 400 mm, area performance: 1,600 m²/h, overall weight: 55 kg, warranty duration: 12 months, water tank capacity: 25 l, KARCHER BR 40/25 C Bp Pack SCRUBBER NEW 12V 85Ah SIAP GEL BATTERIES (2x) 400mm cleaning head equipped with new medium-hard cylindrical brushes for work on any surface. New natural rubber squeegees A built-in battery charger simplifies daily operation. The device is equipped with a new, durable drain hose and a new suction hose. The suction turbine ensures high water suction power from the squeegee. Each device we offer is individually photographed; you buy exactly what you see. TECHNICAL DATA: Working width (mm): 400 Suction width (mm): 770 Power supply: battery Clean/dirty water tank (l): 25/25 Brush pressure (g/cm²): 250 Brush speed (rpm): 1350 Theoretical capacity (m²/h): 1600 Weight (kg): 55 Dimensions (L x W x H) (mm): 800 x 575 x 830 INCLUDED: NEW 12V 85Ah SIAP GEL BATTERIES (2x) NEW 400mm PPL0.5 cylindrical brushes (2x) NEW suction hose NEW drain hose Suction turbine Suction blade with new rubbers Built-in battery charger 5 liters of Tenzi Normal solution - FREE Gisdpfsymxr Rex Ab Det KEY FEATURES: The 25-liter tank allows for a large volume of cleaning solution, eliminating the need to frequently stop for refills. The machine's design makes it highly maneuverable. The small turning radius allows for operation even in narrow passages and alleys. The squeegee bar ensures precise suction of the solution from the cleaned surface. The large working width (400mm) ensures high surface coverage. The control panel is very clear and intuitive.

Condition: reconditioned (used), functionality: fully functional, working width: 400 mm, area performance: 1,600 m²/h, overall weight: 55 kg, warranty duration: 12 months, water tank capacity: 25 l, KARCHER BD 40/25 C Bp Pack Scrubber NEW 12V 85Ah SIAP GEL BATTERIES (2x) 400mm cleaning head equipped with a new medium-hard disc brush, enabling work on any surface. New natural rubber squeegees A built-in battery charger simplifies daily operation. The device is equipped with a new, durable drain hose and a new suction hose. A new suction turbine ensures high water suction power from the squeegee. Each device we offer is individually photographed; you get exactly what you see. TECHNICAL DATA: Working width (mm): 400 Suction width (mm): 770 Power supply: battery Clean/dirty water tank (l): 25/25 Theoretical capacity (m²/h): 1600 Weight (kg): 55 Dimensions (L x W x H) (mm): 800 x 575 x 830 INCLUDED: NEW 12V GEL BATTERIES 85Ah SIAP (2x) NEW 24V 500W suction turbine NEW 400mm PPL0.5 disc brush NEW suction hose NEW drain hose Squeegee blade with new rubbers Built-in battery charger 5 liter Tenzi Normal solution - FREE KEY FEATURES: The 25-liter tank allows for a large volume of cleaning solution, eliminating the need to frequently stop for refills. Gisdoymxi Nepfx Ab Dst Thanks to its design, the machine is highly maneuverable. The small turning radius allows for operation even in narrow passages and alleys. The squeegee bar ensures precise solution extraction from the cleaned surface. The large working width (400mm) ensures high surface coverage. The control panel is easy to read and intuitive to use.

Condition: reconditioned (used), functionality: fully functional, working width: 400 mm, area performance: 1,600 m²/h, overall weight: 55 kg, warranty duration: 12 months, water tank capacity: 25 l, KARCHER BR 40/25 C Bp Pack SCRUBBER NEW 12V 85Ah SIAP GEL BATTERIES (2x) 400mm cleaning head equipped with new medium-hard cylindrical brushes for work on any surface. New natural rubber squeegees A built-in battery charger simplifies daily operation. The device is equipped with a new, durable drain hose and a new suction hose. The suction turbine ensures high water suction power from the squeegee. Each device we offer is individually photographed; you buy exactly what you see. TECHNICAL DATA: Working width (mm): 400 Suction width (mm): 770 Power supply: battery Clean/dirty water tank (l): 25/25 Brush pressure (g/cm²): 250 Brush speed (rpm): 1350 Theoretical capacity (m²/h): 1600 Weight (kg): 55 Dimensions (L x W x H) (mm): 800 x 575 x 830 INCLUDED: NEW 12V 85Ah SIAP GEL BATTERIES (2x) NEW 400mm PPL0.5 cylindrical brushes (2x) NEW suction hose Gijdpfeymw Uqjx Ab Dot NEW drain hose Suction turbine Suction blade with new rubbers Built-in battery charger 5 liters of Tenzi Normal solution - FREE KEY FEATURES: The 25-liter tank allows for a large volume of cleaning solution, eliminating the need to frequently stop for refills. The machine's design makes it highly maneuverable. The small turning radius allows for operation even in narrow passages and alleys. The squeegee bar ensures precise suction of the solution from the cleaned surface. The large working width (400mm) ensures high surface coverage. The control panel is very clear and intuitive.

Condition: reconditioned (used), Year of construction: 2017, functionality: fully functional, working width: 380 mm, area performance: 1,500 m²/h, overall weight: 80 kg, warranty duration: 12 months, water tank capacity: 16 l, HAKO SCRUBMASTER B12 TB380 SCRUBBER NEW SONNENSCHEIN GF 12 025V GEL BATTERIES (2x) NEW SPE 24V 4.5A INTERNAL BATTERY CHARGER Manufactured in 2017 380mm cleaning head (TB380) equipped with a new holder and soft pad, allowing operation on any surface New polyurethane squeegee rubbers resistant to oil, grease, and petroleum products The device is equipped with a new durable drain hose and a new suction hose A new suction turbine ensures high water suction power from the squeegee blade Each device we offer has individually taken photos; you are buying exactly what you see TECHNICAL DATA: Working width (mm): 380 Width Squeegee diameter (mm): 470 Gedpfx Abjymw Nbs Dsit Capacity (m²/h): 1,500 Number of brushes (pcs): 1 Clean water tank capacity (l): 16 Dirty water tank capacity (l): 22 Weight without batteries (kg): 40 Weight ready to use (kg): 80 Power (kW): 0.54 INCLUDED: NEW SONNENSCHEIN GF 12 025V GEL BATTERIES (2x) NEW SPE 24V 4.5A INTERNAL BATTERY CHARGER NEW holder + red (soft) pad NEW 24V 250W suction turbine NEW drain hose NEW suction hose Squeegee blade with new oil-resistant rubbers Tenzi Normal fluid 5 liters - FREE KEY FEATURES: The 16-liter tank allows for a large volume of cleaning solution, eliminating the need to frequently stop for refills. The machine's design makes it highly maneuverable. A small turning radius allows for operation even in narrow passages and alleys. The parabolic squeegee beam ensures precise solution extraction from the cleaned surface. The large working width (380 mm) ensures high surface coverage. The control panel is easy to read and intuitive to use.

Year of construction: 2007, condition: excellent (used), Power generator 150 kVA Renault Turbo - French production – year of manufacture 2007 – cabin TECHNICAL PARAMETERS: Gisdpfx Abeivt Ine Det diesel MOT-482 engine generator Unelec engine power 120 kW generator power max 150 kVA liquid-cooled engine turbine transport dimensions (length / width / height) 310 / 150 / 245 cm weight 2000 kg

Condition: new, maximum load weight: 40,017 kg, overall weight: 50,960 kg, axle configuration: > 3 axles, Year of construction: 2026, Technical Description Gooseneck: Gooseneck with rear chamfer of approx. 750 mm x 10°. 3 pairs of lashing rings (LC 5,000 daN). 30 mm hardwood flooring. Loading Platform: 5 pairs of folding external lashing rings (LC 5,000 daN). 3 pairs of folding external lashing rings (LC 10,000 daN). Giedpfxjw Dl Hqe Ab Det 1 pair of flat-mounted lashing rings at the front of the loading platform (LC 10,000 daN). Approx. 48 mm thick hardwood flooring, checker plate covering over the axles. Landing Legs: JOST landing legs (mechanical) with 2-speed gearbox for 24 t lifting capacity (50 t test load). Tyres: 205/65 R17.5 tyres as per manufacturer's specification. TPMS: TPMS tyre pressure monitoring system compliant with ECE R 141. Data transmission to the tractor unit via the standardised EBS interface according to ISO 11992. To ensure correct display, the tractor unit must be capable of transmitting and displaying this data. Axles: BPW axles, two fixed axles, two self-steering axles, air-suspended, with drum brake, with lifting/lowering function. The self-steering axles can be locked electronically via reverse gear or manually using an electromagnet. Axle tools included. Brake System: WABCO brake system in accordance with EU regulations with EBS-E (4S3M) without connecting lines to the tractor unit. Electrical System: Electrical system according to EU regulations, 24 volt LED lighting by ASPÖCK-NORDIK (ASS3). All LED side marker lamps flash with the turn indicators. ASPÖCK-UNIBOX at the front connection panel with 24N, 24S & 15-pin sockets. Connections conform to ISO standards: 24N ISO-1185 24S ISO-3731 15-pin ISO-12098 Steel Construction: Steel structure made from high-strength fine-grained steels. Steel grades: – S355J2+N/S355MC (yield strength 355 MPa) – S690QL/S700MC (yield strength 690 MPa) Paintwork: The entire steel structure is automatically shot-blasted with a turbine system after welding. A second abrasive blasting treatment with corundum ensures optimal adhesion of the coating system. HRM metallization of the entire vehicle chassis with ZINACOR 850 (85% zinc/15% aluminum) for superior corrosion protection. Final coating with 2 coats of 2K topcoat, single-colour in a shade of your choice according to the RAL 841GL system. Rear section metallized and painted in RAL 9010 (pure white). Metallic paint not possible. Paint system tested in salt spray test according to ISO 9227-NSS. Cavities sealed with special wax. Options included: 2" kingpin One galvanized steel bulkhead. Yellow-red air couplings on the galvanized front connection panel. 2 wheel chocks with holders on the bulkhead. Fixture at the rear of the gooseneck for ALU approach ramps. Further options upon request.

Condition: reconditioned (used), Year of construction: 2013, operating hours: 1,209 h, functionality: fully functional, working width: 510 mm, area performance: 2,000 m²/h, overall weight: 230 kg, warranty duration: 12 months, water tank capacity: 42 l, HAKO HAKOMATIC B45 TB510 SCRUBBER NEW 12V 105Ah SIAP GEL BATTERIES (2x) Manufactured in 2013 with 1209 hours of operation 510mm cleaning head (TB510) equipped with a new medium-hard disc brush, allowing work on any surface. New polyurethane squeegee rubbers, resistant to contact with oily liquids, grease, and petroleum products. A built-in battery charger simplifies daily operation. A new protective rubber around the brush head prevents water from splashing outside the machine's outline. The device is equipped with a new, durable drain hose and a new suction hose. A new suction turbine ensures high water suction power from the squeegee. Each device we offer is individually photographed; you buy exactly what you see. TECHNICAL DATA: Power supply voltage: 24 V Brush working width (mm): 510 Suction nozzle working width (mm): 860 Theoretical capacity (m²): 2000 Brush speed (rpm): 210 Tank capacity (l): 42/42 Machine weight, ready to use (kg): ~230 Power (kW): 1.31 INCLUDED: NEW GEL BATTERIES 12V 105Ah SIAP (2x) NEW 24V 400W suction turbine NEW 510mm PPL 0.5 disc brush NEW suction hose NEW drain hose NEW head guard rubber Squeegee blade with new oil-resistant rubbers Built-in battery charger 5 liters of Tenzi Normal solution - FREE KEY FEATURES: The 42-liter tank allows for a large volume of cleaning solution, eliminating the need to frequently stop for refills. The machine's design makes it highly maneuverable. The small turning radius allows for operation even in narrow passages and alleys. The parabolic squeegee beam ensures precise suction of the solution from the cleaned surface. The large working width (510 mm) ensures high surface coverage. Gjdpfxsymph Ns Ab Dsit The control panel is very clear and intuitive.

Condition: reconditioned (used), Year of construction: 2011, operating hours: 1,522 h, functionality: fully functional, working width: 510 mm, area performance: 2,300 m²/h, overall weight: 230 kg, warranty duration: 12 months, water tank capacity: 42 l, HAKO HAKOMATIC B45 CL TB510 SCRUBBER NEW 12V 105Ah SIAP GEL BATTERIES (2x) Manufactured in 2011 Only 1,522 hours on the machine! The 510mm cleaning head (TB510) is equipped with a new medium-hard disc brush, allowing work on any surface. New polyurethane squeegee rubbers are resistant to contact with oily liquids, grease, and petroleum products. The built-in battery charger and wheel drive simplify daily operation. A new protective rubber around the brush head prevents water from splashing outside the machine's outline. The device is equipped with a new, durable drain hose and a new suction hose. A new suction turbine ensures high water suction power from the squeegee. Each device we offer is individually photographed; you buy exactly what you see. TECHNICAL DATA: Power supply voltage: 24 V Brush working width (mm): 510 Suction nozzle working width (mm): 860 Theoretical capacity (m²): 2300 Brush speed (rpm): 210 Tank capacity (l): 42/42 Machine weight, ready to use (kg): ~230 Power (kW): 1.31 INCLUDED: NEW 12V 105Ah SIAP GEL BATTERIES (2x) NEW 24V 400W suction turbine NEW 510mm PPL 0.5 disc brush NEW suction hose NEW drain hose NEW head guard rubber Squeegee blade with new oil-resistant rubbers Gijdpfeymn Syjx Ab Djt Built-in battery charger 5 liters of Tenzi Normal fluid - FREE KEY FEATURES: The 42-liter tank allows for a large volume of cleaning solution, eliminating the need to frequently stop for refills. The machine's design makes it highly maneuverable. The small turning radius allows for operation even in narrow passages and alleys. The parabolic squeegee beam ensures precise suction of the solution from the cleaned surface. The large working width (510 mm) ensures high surface coverage. The control panel is very clear and intuitive.

Condition: good (used), functionality: fully functional, MAPELLI 3-bag sawdust extractor 11 kW Specification: • Condition – used, serviced • Manufacturer – MAPELLI • Turbine motor power – 11 kW • Turbine diameter – 70 cm • Bag shaking mechanism with control cabinet • Turbine inlet – 420 mm diameter Gjdpfow U D Itox Ab Doit • Filter area: 18 filter bags 25x160 cm • Airtight body with warm air return • Pipes and chimney from the photos included • Collection bag diameter – 3 x 600 mm • Overall dimensions – 395/290 x 105 x 380 cm (length/length without turbine x width x height) • Transport height – 280 cm + skids Additional information: • Good original technical condition • Photos reflect the actual condition of the item for sale • Possibility to power up and test the machine on site

Condition: new, Year of construction: 2026, The radial turbine is placed in a negative pressure cabin on the clean air side in special sound-absorbing cabins. The new generation reinforced turbine and large filtration field operate more efficiently and effectively, and also contribute to saving electricity. Advantages The DCV 7500 extractor is another milestone in the production of efficient sawdust and dust extractors, the aim of which is to constantly ensure the same extraction parameters during the entire work cycle. a durable, massive construction guaranteeing quiet and vibration-free operation of the extractor failure-free operation confirmed by production plants dealing with large orders every day takes up little space and yet can extract large amounts of dust and chips a metal suction nozzle with a large diameter of 280 mm ensures excellent air flow a strong and quiet fan guaranteeing high negative pressure efficiency! have a special blade design, which makes them more efficient and effective, and also contributes to saving electricity very high tightness of the entire suction system, guaranteeing the best air quality inside the plant, and no heat loss during the heating season large filter surface possibility of building a ceiling system and connecting several machines working simultaneously with DCV 7500E extractors quick replacement of foil waste bags designed in such a way as to maintain 99.99% airtightness of the system, low noise and high efficiency are ensured by a metal balanced rotor ensures perfection and cleanliness at the workplace, which directly translates into the quality of your products works perfectly with machines such as: grinders, edge banding machines, panel saws, etc. We guarantee high quality cleaning!!! the polyester filter stops dust with a diameter of up to 5 microns, to filter smaller particles, a filter such as HEPA should be used It is prohibited to use this extractor in an explosive atmosphere The extractor is used for work in the carpentry industry with sawdust, shavings, dust (it is not adapted to work with wet raw materials, e.g. wet sawdust) Technical parameters CONTINUOUS OPERATION MOTOR POWER S1 5.5 kW / 400 V, 50 Hz SPEED 2900 rpm Gedpfxjvzqtxe Ab Doit SUCTION CAPACITY 7500 m3/h SUCTION PORT DIAMETER 280 mm SUCTION SPEED 28-32 m/s FILTER SURFACE AREA 18 m2 FILTER MATERIAL Polyester, 5 microns NUMBER OF FILTERS 35 DIMENSIONS 1040 x 625 x 2150 mm WEIGHT 306 kg Manufacturer: Cormak

Year of construction: 2012, operating hours: 10 h, condition: like new (used), functionality: limited functionality, The generator was involved in the development of a vertical wind turbine and, due to the termination of the project, has very few operating hours. The control cabinets were assembled in Offenburg. Gisdpfx Ajyl Nntob Dot

Condition: good (used), 4 x Bonfiglioli wind turbine gearbox JB00001227 SN B6201603697 Gedpfx Aewg E Uteb Doit

Condition: used, Year of construction: 1998, Overview  This vacuum filler was built in 1998 by Italian manufacturer GAI. In 2024 the machine was fully refurbished and is available immediately.   Technical Details    Effective Capacity: approx. 4,500-5,000 bottles/hour  Machine equipped for the following bottle formats: Bordeaux 75cl (diameter 78mm) - Burgundy 75 - 37.5cl - Magnums  Rinser with 20 clamps, inspected  Filler with 20 taps and vacuum system (new turbine) - taps inspected, new gaskets. New seating springs.  AROL Saturno Capper with 4 heads and vacuum - semi-new jaws in perfect condition - new vacuum pump and circuit  New wine inlet solenoid valve  Plug for feed pump  Machine newly refurbished (solenoid valve, jaws, vacuum turbine, gaskets, vacuum pump)  Electrical supply: 400 Volts / 50 Hz, 3 phases  Dimensions:  Long 380cm x Wide 140cm x High 250cm  Weight: 3500 kg    Gsdpfjuch Tmex Ab Deit

Condition: reconditioned (used), Year of construction: 2017, operating hours: 270 h, functionality: fully functional, working width: 1,020 mm, area performance: 7,100 m²/h, overall weight: 1,445 kg, warranty duration: 12 months, tank capacity: 310 l, HAKO SCRUBMASTER B310 R TB1020 SCRUBBER NEW HAWKER PERFERCT PLUS 36V 480Ah TRACTION BATTERY (6PZS480) NEW NEOS 36V 50A CHARGER Manufactured in 2017 with 270 hours on the clock 1020mm cleaning head (TB1020) equipped with two new medium-hard disc brushes for use on any surface. New squeegee blades made of high-quality natural rubber are ideal for use on all surfaces. New protective rubbers around the brush head prevent water from splashing outside the machine's contour. The device is equipped with new, durable drain hoses. A new suction turbine ensures high water suction power from the squeegee blade. Each device we offer has individually taken photos; you buy exactly what you see. TECHNICAL DATA: Working width (mm): 1020 Squeegee width (mm): 1260 Capacity (m²/h): 7100 Width without squeegee/with squeegee (mm): 1130/1260 Voltage (V): 36 Number of disc brushes (pcs): 2 Operating speed (km/h): 7.5 Clean water tank capacity (l): 155 Recovery tank capacity (l): 155 Weight without batteries (kg): 710 Working weight (kg): 1445 INCLUDED: NEW HAWKER PERFERCT PLUS 36V 480Ah TRACTION BATTERY (6PZS480) NEW NEOS 36V 50A BATTERY CHARGER Godpfxeyk Dnxj Ab Doit NEW 36V 600W suction turbines (2x) NEW 510mm PPL 0.5 disc brushes (2x) NEW drain hoses (2x) NEW head guard rubbers (2x) Squeegee blade with new rubbers 5 liters of Tenzi Normal fluid - FREE KEY FEATURES: 310 liter tank with a durable, fixed partition The half-sized tank allows for pouring a large amount of cleaning solution, eliminating the need to frequently interrupt work to refill. Thanks to its design, the machine is highly maneuverable. The small turning radius allows for operation even in narrow passages and alleys. The parabolic squeegee beam ensures precise solution extraction from the cleaned surface. The large working width (1020 mm) ensures high surface coverage. The control panel is very easy to read and intuitive to use.

Condition: new, Year of construction: 2026, A device for extracting aluminum chips and shavings (not aluminum dust), steel from machines and cleaning the workplace. The use of a side turbine makes the device ideal for connecting to machines where a large amount of chips is produced. It is equipped with a dust filter and a container (drawer) for pouring out the by-product. Machine characteristics Quick and easy filter replacement Large container for chips and shavings Quick access to the collection container Stably standing, compact housing Large container capacity Effective extraction Technical data ENGINE 0.75 kW VOLTAGE 230V or 400 V / 50 Hz SUCTION CONNECTIONS 1 x 100 mm EXTRACTION CAPACITY WITHOUT BAG 1800 m³/h EXTRACTION CAPACITY WITH BAG Gisdpfsvugghox Ab Dst 1520 m³/h ROTOR DIAMETER 350 mm DIMENSIONS 870 x 560 x 1170 mm WEIGHT 31 kg The price given is NET. The price does not include shipping costs. For more information, please contact us by phone or email. We invite you to familiarize yourself with the offer on our website.

Condition: new, Year of construction: 2026, A machine designed for aluminium and steel chips (not aluminium dust) as well as grinding dust collection from machines, along with cleaning workstations. A side turbine makes the collector perfect for connection to machines that produce large number of chips. Also equipped with a dust filter and a tank (a drawer) for by-product removal. Machine features Quick and easy filter replacement Large container for waste with easy access Gsdpfx Aevuq Amjb Dsit Compact and stable body High efficiency Technical data Motor S1 100%: 1.5 kW; S6 40%: 2.1 kW Voltage 400V/50Hz Intake connectors 2×100 mm Suction efficiency without bag 2200 m³/h Suction efficiency with bag/hose 1500 m³/h Dimensions 840×660×710 mm Weight 72 kg

Condition: new, Year of construction: 2026, New series of TC extractors equipped with a full upper housing with a warm air return outlet that absorbs noise and vibrations during operation! The only construction in Poland with protection, i.e. a "lock", protects the engine, filters and turbine from damage. They work with machines such as CNC milling machines, panel saws, edge banding machines with pre-milling, wide belt sanders, format saws, four-sided planers, etc. Advantages of DCV dust extractors Durable, massive construction guaranteeing quiet and vibration-free operation of the dust extractor the new TC extractor series has a full upper housing that absorbs noise and vibrations generated during operation and the possibility of returning warm air Very high tightness of the entire suction system, guaranteeing the best air quality inside the plant, and no heat loss during the heating period Gsdpfoudaazjx Ab Dsit Strong and quiet radial fan guaranteeing you high negative pressure efficiency Possibility to build a ceiling system and connect several machines working simultaneously with DCV extractors Failure-free filter shaking system with the possibility of working in an automatic cycle Mobile chassis facilitating trouble-free movement of extractors throughout the plant Waste containers designed in such a way as to maintain 99.99% of the system's hermeticity, at the same time they were equipped with a mobile drive system Control cabinet for switching the device on/off The polyester filter retains dust with a diameter of up to 5 microns, in order to filter smaller particles, a filter, e.g. HEPA, should be used It is forbidden to use this extractor in an explosive atmosphere The extractor is not adapted to work with wet raw materials (e.g. wet sawdust) Before starting the extractor, the lower beam must be dismantled to have free access to the chip containers Reduction - Warm air return additionally payable Technical parameters CONTINUOUS ENGINE POWER S1 7.5 kW / 400 V, 50 Hz SPEED 3000 rpm SUCTION CAPACITY 8900 m3/h SUCTION PIPE DIAMETER 300 mm SUCTION SPEED 28-32 m/s FILTER SURFACE AREA 20 m2 FILTER MATERIAL Polyester, 5 microns NUMBER OF FILTERS 45 DIMENSIONS 1170x2400x2240 mm WEIGHT 500 kg

Condition: used, Year of construction: 2025, A device for extracting aluminum chips and shavings (not aluminum dust), steel from machines and cleaning the workplace. The use of a side turbine makes the device ideal for connecting to machines where a large amount of chips is produced. It is equipped with a dust filter and a container (drawer) for pouring out the by-product. Machine characteristics Quick and easy filter replacement Large container for chips and shavings Quick access to the collection container Stably standing, compact housing Large container capacity Effective extraction Technical data ENGINE 0.75 kW VOLTAGE 400 V / 50 Hz SUCTION CONNECTIONS Gijdpfx Abjxzrzaj Djt 1 x 100 mm EXTRACTION CAPACITY WITHOUT BAG 1800 m³/h EXTRACTION CAPACITY WITH BAG 1520 m³/h ROTOR DIAMETER 350 mm DIMENSIONS 870 x 560 x 1170 mm WEIGHT 31 kg WARNING!! This machine is a return item. Mechanical damage to the casing, broken electrical box.

Condition: refurbished (used), functionality: fully functional, power: 30 kW (40.79 HP), color: blue, overall weight: 674 kg, Year of construction: 2018, Submersible pump with helical turbine, suitable for pumping wastewater. The pump is mounted in a cathedral-type frame with base, discharge elbow, and equipped with a 20-meter power cable. The pumps have been overhauled. Two pumps are available for sale; the listed price is per unit. (See technical datasheet in the photos) Four-pole oil-bath motor allowing dry-running operation. Gijdpox Sdtrofx Ab Dot Max flow rate: 490 m³/h Max head: 25 m Power supply: three-phase 400V Power: 30 kW

Condition: new, Year of construction: 2022, functionality: fully functional, Item: A-Aalborg-Micro AALBORG MICRO The Aalborg Micro is a compact exhaust gas heat exchanger/steam generator, designed for waste heat recovery from gas/MDO/HFO engines and gas turbines. As a heat exchanger, the Aalborg Micro offers a wide range of opportunities, due to the fact that hot water, TEG and TFO can all be used as media. Furthermore the Aalborg Micro can be used as a steam generator. Gijdpoqy Nv Rofx Ab Dot A cylindrical unit in the center with an integrated regulation damper allows up to 80% of the exhaust gas to bypass the heating surface. The heating surface can be cleaned easily via optional soot blower rings using compressed air/steam/water, and/or by a pyrolysis process in dry-run mode