Truck mounted crane

Kässbohrer Powerbully 18T Kran PK23002-SH

Condition: used, mileage: 300 km, power: 231 kW (314.07 HP), first registration: 04/2026, fuel type: diesel, overall weight: 30,000 kg, gearing type: automatic, total length: 8,228 mm, total width: 3,077 mm, total height: 3,375 mm, Year of construction: 2026, Equipment: air conditioning, crane, TECHNICAL SPECIFICATIONS KÄSSBOHRER POWERBULLY 18T WITH PALFINGER PK 23002 SH E POWER LINK PLUS Note: The vehicle is from the 2019/2020 production run. Acceptance/initial registration is from 2026. GENERAL DESIGN ? High-performance tracked vehicle for professional use in challenging terrain ? Vehicle built on a Kässbohrer PowerBully 18T chassis ? Equipped with a hydraulic PALFINGER PK 23002 SH E Power Link Plus loading crane ? Suitable for assembly, lifting, and transport work in difficult terrain ? Can be used on peatlands, forest paths, routes, mountainous regions, and nature reserves CHASSIS Hsdpfx Aozydk Rjf Sju ? Manufacturer: Kässbohrer ? Type: PowerBully 18T ? Tracked vehicle with hydrostatic drive ? Cummins B6.7 turbocharged diesel engine ? Engine power: 231 kW (310 hp) ? Emission standard: EU Stage V ? Maximum speed: approx. 13 km/h ? Permissible total weight: 30,000 kg ? Low ground pressure due to wide rubber tracks ? Can turn on the spot OFF-ROAD CAPABILITIES ? Climbing ability up to 60% ? Side slope up to 40% ? Wading depth up to 1,400 mm ? High traction on soft and uneven surfaces ? Environmentally friendly operation on sensitive surfaces ? Ideal for work off paved roads CAB ? Safety cab with ROPS/FOPS design ? Air conditioning ? Air-suspended comfort seat ? Electronic vehicle control ? Touchscreen control panel ? Rear view camera ? LED work lights ? GPS telemetry and fleet management system CRANE Manufacturer / Type ? PALFINGER PK 23002 SH E Power Link Plus ? Hydraulic articulated boom loading crane ? Endless slewing ring ? Hydraulic six-stage extension boom Performance data ? Lifting moment: 21.5 mt (215 kNm) ? Maximum lifting capacity: approx. 6,200 kg ? Maximum hydraulic reach: approx. 17.10 m ? Lifting capacity at maximum outreach: approx. 890 kg ? Precise load positioning thanks to sensitive hydraulic control Crane equipment ? PALCOM radio remote control ? PALTRONIC overload protection system ? HPSC stability monitoring system ? Active vibration damping ? Hydraulic winch ? Four-point outriggers ? Additional hydraulic connections for attachments ? LED work lights on the crane AREAS OF APPLICATION ? Overhead power line and electricity pole construction ? Wind turbine service ? Pipeline and pipeline construction ? Telecommunications and radio mast construction ? Specialized forestry work ? Work in peatlands and nature reserves ? Disaster control and rescue operations ? Assembly and lifting work in difficult-to-reach terrain PARTICULAR ADVANTAGES ? Combination of a transport vehicle and a powerful loading crane ? Extremely low ground pressure for sensitive surfaces ? High payload with excellent off-road performance ? Safe working even under the most challenging conditions ? Economical alternative to mobile cranes in difficult terrain ? High flexibility for energy suppliers, network operators, and specialized civil engineering companies SUMMARY The Kässbohrer PowerBully 18T with the mounted PALFINGER PK 23002 SH E Power Link Plus combines maximum off-road capability with powerful crane technology. Due to its extremely low ground pressure, high payload, and a reach of over 17 meters, the machine is particularly suitable for lifting, assembly, and transport tasks in areas that cannot be reached with conventional truck cranes or construction machines.

Condition: refurbished (used), Year of construction: 2022, operating hours: 1,518 h, functionality: fully functional, power: 260 kW (353.50 HP), year of last overhaul: 2026, Basic Inventhor 6 package: Load-Sensing System Fuel tank, 500 liters Longitudinal belt: belt length 2,900 mm, belt width 800 mm centrally arranged lubrication strips 24V electrical control system - additional electric pump for operating the following functions when the engine is stopped: raise/lower/tilt rear belt, open/close comb flap, open/close comb, raise/lower folding chute complete radio remote control large side GRP maintenance doors easy-to-maintain engine compartment LED lighting package: engine compartment and rear hydraulically reversible fan wheel three-sided loading protection folding chute fire extinguisher maintenance ladder toolbox acoustic start-up warning Doppstadt telematics system paint: RAL2011 traffic orange Additional equipment: Drive train 260 kW - EV 2-axle semi-trailer chassis Shredding system Size L - 20 teeth Additional hydraulic connection 35 - 80 l/min Hydraulic drive Hsdpfx Aexx N Dgef Seu Rear belt 7 m Over-belt magnet, neodymium Frame for over-belt magnet, 7 m Delivery date will be agreed upon.

Condition: used, Year of construction: 2026, operating hours: 380 h, TECHNICAL SPECIFICATIONS KÄSSBOHRER POWERBULLY 18T WITH PALFINGER PK 23002 SH E POWER LINK PLUS Note: The vehicle is from the 2019/2020 production year. Acceptance/initial registration is from 2026. GENERAL DESIGN ? High-performance tracked vehicle for professional use in challenging terrain ? Vehicle built on a Kässbohrer PowerBully 18T chassis ? Equipped with a hydraulic PALFINGER loading crane, PK 23002 SH E Power Link Plus ? Suitable for assembly, lifting and transport work in difficult terrain ? Can be used on peatlands, forest paths, tracks, mountainous regions and nature reserves CHASSIS ? Manufacturer: Kässbohrer ? Type: PowerBully 18T ? Tracked vehicle with hydrostatic drive ? Cummins B6.7 turbocharged diesel engine ? Engine power: 231 kW (310 hp) ? Emission standard: EU Stage V ? Maximum speed: approx. 13 km/h Hodpfxszdl R Ts Af Seu ? Permissible total weight: 30,000 kg ? Low ground pressure due to wide rubber tracks ? Ability to turn on the spot OFF-ROAD CAPABILITIES ? Gradient capability up to 60% ? Lateral inclination up to 40% ? Wade depth up to 1,400 mm ? High traction on soft and uneven surfaces ? Environmentally friendly operation on sensitive surfaces ? Optimal for work away from paved roads CAB ? Safety cab in ROPS/FOPS design ? Air conditioning ? Air-suspended comfort seat ? Electronic vehicle control ? Touchscreen operating terminal ? Rear view camera ? LED work lights ? GPS telemetry and fleet management system CRANE SYSTEM Manufacturer / Type ? PALFINGER PK 23002 SH E Power Link Plus ? Hydraulic knuckle boom loading crane ? Continuous slewing system ? Hydraulic six-stage boom extension Performance data ? Lifting moment 21.5 mt (215 kNm) ? Maximum lifting capacity approx. 6,200 kg ? Maximum hydraulic reach approx. 17.10 m ? Lifting capacity at maximum outreach approx. 890 kg ? Precise load positioning through sensitive hydraulic control Crane equipment ? PALCOM radio remote control ? PALTRONIC overload protection ? HPSC stability monitoring ? Active vibration damping ? Hydraulic winch ? Four-point outriggers ? Additional hydraulic connections for attachments ? LED work lights on the crane AREAS OF APPLICATION ? Overhead power line and electricity pylon construction ? Wind turbine service ? Pipeline and pipeline construction ? Telecommunications and radio mast construction ? Forestry special work ? Work in moorlands and nature reserves ? Disaster control and rescue operations ? Assembly and lifting work in difficult-to-access terrain PARTICULAR ADVANTAGES ? Combination of a transport vehicle and a powerful loading crane ? Extremely low ground pressure for sensitive surfaces ? High payload with excellent off-road capability ? Safe operation even under the most difficult conditions ? Economical alternative to mobile cranes in difficult terrain ? High flexibility for energy suppliers, network operators and specialist civil engineering companies SUMMARY The Kässbohrer PowerBully 18T with a PALFINGER PK 23002 SH E Power Link Plus offers maximum off-road capability combined with powerful crane technology. Thanks to the extremely low ground pressure, high payload and a reach of over 17 meters, the machine is particularly suitable for lifting, assembly and transport tasks in areas that cannot be reached with conventional truck cranes or construction machinery.

Condition: used, Year of construction: 2026, operating hours: 380 h, TECHNICAL SPECIFICATIONS KÄSSBOHRER POWERBULLY 18T WITH PALFINGER PK 23002 SH E POWER LINK PLUS Note: The vehicle is from the 2019/2020 production period. Acceptance/initial registration is from 2026. GENERAL DESIGN ? High-performance tracked vehicle for professional use in difficult terrain ? Vehicle built on a Kässbohrer PowerBully 18T chassis ? Equipped with a hydraulic PALFINGER loading crane PK 23002 SH E Power Link Plus ? Suitable for assembly, lifting and transport work in rough terrain ? Can be used on moorlands, forest paths, tracks, mountainous regions and nature reserves CHASSIS ? Manufacturer: Kässbohrer ? Type: PowerBully 18T ? Tracked vehicle with hydrostatic drive ? Cummins B6.7 turbocharged diesel engine ? Engine power: 231 kW (310 hp) ? Emission standard: EU Stage V ? Maximum speed: approx. 13 km/h ? Permissible total weight: 30,000 kg ? Low ground pressure due to wide rubber tracks ? Ability to turn on the spot OFF-ROAD CAPABILITIES ? Climbing ability up to 60 % ? Side slope up to 40 % ? Wading depth up to 1,400 mm Hedpfszdl R Hsx Af Sou ? High traction on soft and uneven surfaces ? Environmentally friendly operation on sensitive areas ? Optimal for work away from paved roads CAB ? Safety cab in ROPS/FOPS design ? Air conditioning ? Air-suspended comfort seat ? Electronic vehicle control ? Touchscreen control panel ? Reversing camera ? LED work lights ? GPS telemetry and fleet management system CRANE SYSTEM Manufacturer / Type ? PALFINGER PK 23002 SH E Power Link Plus ? Hydraulic knuckle boom loading crane ? Continuous slewing ring ? Hydraulic six-section boom Performance data ? Lifting moment 21.5 mt (215 kNm) ? Maximum lifting capacity approx. 6,200 kg ? Maximum hydraulic reach approx. 17.10 m ? Lifting capacity at maximum outreach approx. 890 kg ? Precise load positioning through sensitive hydraulic control Crane equipment ? PALCOM radio remote control ? PALTRONIC overload protection ? HPSC stability monitoring ? Active vibration damping ? Hydraulic winch ? Four-point outrigger system ? Additional hydraulic connections for attachments ? LED work lights on the crane AREAS OF APPLICATION ? Overhead power line and electricity pole construction ? Wind turbine service ? Pipeline and pipeline construction ? Telecommunications and radio mast construction ? Forestry operations ? Work in moorlands and nature reserves ? Disaster control and rescue operations ? Assembly and lifting work in hard-to-reach terrain PARTICULAR ADVANTAGES ? Combination of a transport vehicle and a powerful loading crane ? Extremely low ground pressure for sensitive surfaces ? High payload combined with excellent off-road performance ? Safe operation even under the most difficult conditions ? Economical alternative to mobile cranes in rough terrain ? High flexibility for energy suppliers, network operators and specialist civil engineering companies SUMMARY The Kässbohrer PowerBully 18T with the mounted PALFINGER PK 23002 SH E Power Link Plus combines maximum off-road performance with powerful crane technology. Thanks to the extremely low ground pressure, high payload and a reach of over 17 meters, the machine is particularly suitable for lifting, assembly and transport tasks in areas that cannot be reached with conventional truck cranes or construction machinery.

Condition: excellent (used), functionality: fully functional, power: 29.42 kW (40.00 HP), overall weight: 1,200 kg, fuel type: diesel, Year of construction: 2013, operating hours: 1,127 h, MC Connel Robocut / Energreen Robogreen Radio-controlled mowing crawler / large-area mower / embankment mower Technical information according to manufacturer: - 40 HP 3-cylinder Isuzu diesel engine - 2-stage hydrostatic drive (0–4 and 0–7 km/h) - Emergency stop - Slope capability up to 55 degrees - Hydraulic output for mowing rotor (L/min): 50 - Working pressure (bar): 200–350 - Autec model control system - Machine weight incl. attachment (kg): 1040 Attachment: HEAD-130 - Flail mower rotor with 1.30 m working width including floating position, fitted with Y-blades - Mowing rotor weight (kg): 160 Hedpfx Afjw A Nn Ae Seu - Flail rotor speed (rpm): 3000 This Energreen Robocut was manufactured in 2013 and, according to the meter, has 1,127 operating hours. It is in very good overall condition, showing the typical signs of use and wear for this class of machine. Recently serviced with major maintenance and extensive overhaul. Sale as a used machine, excluding return, warranty, and guarantee. Net price: €32,500 // Gross price: €38,675 - Viewing and test drive possible by arrangement - Nationwide shipping can be organized; costs depend on distance - Financing and leasing can be arranged individually

Condition: used, Year of construction: 2026, operating hours: 380 h, TECHNICAL SPECIFICATIONS KÄSSBOHRER POWERBULLY 18T WITH PALFINGER PK 23002 SH E POWER LINK PLUS Note: The vehicle is from the 2019/2020 production run. Acceptance/initial registration is from 2026. GENERAL DESIGN ? High-performance tracked vehicle for professional use in challenging terrain ? Vehicle built on a Kässbohrer PowerBully 18T chassis ? Equipped with a hydraulic PALFINGER PK 23002 SH E Power Link Plus loading crane ? Suitable for assembly, lifting, and transport work in difficult terrain ? Can be used on peatlands, forest paths, routes, mountainous regions, and nature reserves CHASSIS ? Manufacturer: Kässbohrer ? Type: PowerBully 18T ? Tracked vehicle with hydrostatic drive ? Cummins B6.7 turbocharged diesel engine ? Engine power: 231 kW (310 hp) ? Emission standard: EU Stage V ? Maximum speed: approx. 13 km/h ? Permissible total weight: 30,000 kg ? Low ground pressure due to wide rubber tracks ? Can turn on the spot OFF-ROAD CAPABILITIES ? Climbing ability up to 60% ? Side slope up to 40% ? Wading depth up to 1,400 mm ? High traction on soft and uneven surfaces ? Environmentally friendly operation on sensitive surfaces ? Ideal for work off paved roads CAB ? Safety cab with ROPS/FOPS design ? Air conditioning ? Air-suspended comfort seat ? Electronic vehicle control ? Touchscreen control panel ? Rear view camera ? LED work lights ? GPS telemetry and fleet management system CRANE Manufacturer / Type ? PALFINGER PK 23002 SH E Power Link Plus ? Hydraulic articulated boom loading crane ? Endless slewing ring ? Hydraulic six-stage extension boom Performance data ? Lifting moment: 21.5 mt (215 kNm) ? Maximum lifting capacity: approx. 6,200 kg ? Maximum hydraulic reach: approx. 17.10 m ? Lifting capacity at maximum outreach: approx. 890 kg ? Precise load positioning thanks to sensitive hydraulic control Crane equipment ? PALCOM radio remote control ? PALTRONIC overload protection system ? HPSC stability monitoring system ? Active vibration damping ? Hydraulic winch ? Four-point outriggers ? Additional hydraulic connections for attachments ? LED work lights on the crane AREAS OF APPLICATION ? Overhead power line and electricity pole construction ? Wind turbine service ? Pipeline and pipeline construction ? Telecommunications and radio mast construction ? Specialized forestry work ? Work in peatlands and nature reserves ? Disaster control and rescue operations ? Assembly and lifting work in difficult-to-reach terrain PARTICULAR ADVANTAGES ? Combination of a transport vehicle and a powerful loading crane ? Extremely low ground pressure for sensitive surfaces ? High payload with excellent off-road performance Hjdpszgzavefx Af Sou ? Safe working even under the most challenging conditions ? Economical alternative to mobile cranes in difficult terrain ? High flexibility for energy suppliers, network operators, and specialized civil engineering companies SUMMARY The Kässbohrer PowerBully 18T with the mounted PALFINGER PK 23002 SH E Power Link Plus combines maximum off-road capability with powerful crane technology. Due to its extremely low ground pressure, high payload, and a reach of over 17 meters, the machine is particularly suitable for lifting, assembly, and transport tasks in areas that cannot be reached with conventional truck cranes or construction machines.

Condition: new, Year of construction: 2026, Assembly robot BEFARD XGR 800.3 Specification: * full remote control - both operation and drive of the device * three hydraulic extensions with a vertical range of 5.55 m * power supply by a combustion engine (optional additional power supply by a 230 V electric engine or Li-ion batteries) * possibility of simultaneous operation from the 230 V mains and battery charging (for the Li-ion version) * two-circuit vacuum system * maximum lifting capacity 800 kg * 8 vacuum suction cups * rotating frame with suction cups (hydraulically) - controlled by the remote control * lateral shift of the frame with suction cups (right, left 10 cm - hydraulically) * tilting frame with suction cups to the sides (relative to the device - manually or hydraulically) * tilting frame with suction cups (possibility of lifting the element from the horizontal plane and verticalizing it - hydraulically) * non-marking tracks Hsdpfx Afoibqr To Sju * two working modes - fast and slow * color to choose from Optional additional equipment: * HS spacers * valves * frame tilt with suction cups (hydraulic - remote control) * forks * anti-overload system * hook * LED lamp * 230V wired power supply (for the combustion version). Other models available: XGR800.1 with one hydraulic extension, with a vertical reach of 3.9m XGR800.2 with two hydraulic extensions, with a vertical reach of 4.75m Gasoline engine - VANGUARD brand 10 HP / 5.5 KW

Condition: used, mileage: 395,000 km, power: 368 kW (500.34 HP), first registration: 04/2009, fuel type: diesel, overall weight: 32,000 kg, axle configuration: > 3 axles, color: white, gearing type: automatic, emission class: euro5, Year of construction: 2009, Equipment: ABS, air conditioning, crane, Manufacturer Scania Model R500 8X4 EFFER 1355 8/S Winch Euro 5 Year 2009 Condition Good Serial Number XLER8X40005216034 Ref. nr. 218159 Reg. date: Engine: V8 Hjdpfx Aozqxt Isf Sou Hk: 500 Km: 395000 Gearbox: Opticruise GRS905 Eurotype: 5 Diesel tank: 1 Tank liter: 350 Mirror camera: ? Rear view camera: ? Cabin heater: ? Air conditioning: ? Number of beds: 1 Cabin type: CR19 Leather seats: ? Radio: ? Refrigerator: ? Disc brake: ? ABS: ? Engine brake: ? Tire Size: 385/55 - 385/55 - 315/70 - 315/70 Cover% left 60 - 60 - 40 - 80% Front suspension: Air Suspension rear: Air Wheelbase: 4300 mm. Toolbox: ? Total weight: 32000 kg. Net weight: 26000 kg. Crane Manufacturer: EFFER 1355 Tonsmeter: 135 Remote control: ? Year: 2008 Extension extension (hydraulic): 8 Deferral extension (manual): 1

Condition: used, mileage: 732,000 km, power: 380 kW (516.66 HP), first registration: 10/2017, fuel type: diesel, overall weight: 26,000 kg, axle configuration: 3 axles, color: black, gearing type: automatic, emission class: euro6, loading space length: 6,100 mm, loading space width: 2,300 mm, Equipment: air conditioning, crane, parking heater, * Scania R490 6x4 timber truck with crane * Body: Stake body * Engine: Scania DC13 125 * Fuel: Diesel * Power: 360 kW (490 hp) * Displacement: 12,742 cm³ * Emission standard: Euro 6? Hodpfx Afozqiw Re Sou * Maximum speed: 90 km/h * Color: Multi-colored * Drive type: 6x4 * VIN: YS2R6X40005475333 ---- * Weights * Tare weight: 13,680 kg * Permissible total weight: 26,000 kg * Technically permissible total weight: 29,000 kg * Payload: 12,245 kg ---- * Permissible axle loads * 1st axle: 8,000 kg * 2nd axle: 9,500 kg * 3rd axle: 9,500 kg * Trailer load * Braked: 24,000 kg * Unbraked: 750 kg ---- * Tires * Front axle: 385/65 R22.5 * Rear axles: 315/80 R22.5 * Alcoa aluminum rim ---- * Body length: 6.10 m * Body width: 2.30 m ---- * Crane brand: Palfinger Epsilon M122

Condition: used, Year of construction: 2023, rear tire size: 0%, We are offering for sale one used Bergmann M 201 crawler from year 2023 with approximately 155 operating hours. Equipment: radio-controlled crawler, payload 500 kg, unladen weight 1200 kg, lifting capacity 6000 N, height 1287 mm, length 2087 mm, width 1350 mm, rubber tracks 2800 mm wide, angled tread for slope stability, self-cleaning feature, water-cooled 3-cylinder Hatz diesel engine, output 42 kW at 2800 rpm, radiator fan with reversible drive for self-cleaning, hydrostatic travel drive, 0-8.5 km/h. 12V system, LED headlights, hydraulic multi-coupler, one high-performance hydraulic circuit up to 85 L/min, two auxiliary hydraulic circuits up to 10 L/min each, including Müthing mulcher with a working width of 1.40 m, including Seppi mulcher for processing brush and wood up to a diameter of 15 cm. Further details available on request. Hedpfx Aeyq Aw Sef Ssu Location: 93095 Hagelstadt.