Used Tube Threading Machine for sale (84,300)

Condition: used, Year of construction: 2017, pipe diameter (max.): 80 mm, mandrel length: 4,500 mm, Mandrel bending machine S8004 ----- For the production of dimensionally accurate pipe geometries with bending radii of up to 1.5XD → maximum bending performance pipe 76 x 4 mm (400 N/mm²) → maximum bending performance pipe 60 x 60 x 3 mm (400 N/mm²) → maximum bending performance pipe 76 x 2.9 mm (stainless steel) → total connected load 7 kW → pipe length 4.5 mtr Robust and durable steel construction in a force-locking connection - no construction susceptible to torsion due to, for example, the split construction of the bending head and mandrel carrier. Maintenance-free electromechanical drive of the bending axis. The touch display of the control enables simple and intuitive programming and use of the system. After the pipe has been pushed on, it is fixed in the carriage by the chuck. This enables the pipe to be positioned precisely and thus the creation of dimensionally accurate geometries. The standard also includes checking the pipe geometry before the bending process: If the bending process is started in the wrong position, the machine does not give permission for this. This prevents incorrect operation. Optional additional features provide more convenience and increase the output and thus the efficiency of the system. Data is exchanged from the optional pipe calculation program TBS-3D (PC version) via USB stick or via FTP access from the computer to the machine control system. USB or LAN connectors (RJ45) are available as standard. Existing pipe geometries can be converted quickly and easily, for example, using the STEP format. Standard equipment: → Electromechanical drive of the bending axis 4 kW → Speed 2.9 rpm (=17°/sec.) → Bending direction left → Bending angle resolution 0.1° → Max. bending radius 200 mm → Bending shaft diameter 50 mm → Electronic length measurement ±0.1mm → Electronic twist measurement ±0.1° → Manual stop system (overtravel stops in length) → Manual locking system (15° in twist) → Three-jaw chuck for locking the pipe in the carriage → External control panel PLC control: → Touchscreen 10.1" → ETH 10/100, X2X Link, USB → Foot switch operation → Data transfer via network (W)LAN or USB → Material database Unique graphic programming: Simple geometries can be calculated directly on the machine. The control calculates the feed values directly after entering the length and angle and the bending angles. Hnedpfx Ahsttah Ro Njg Hydraulics: → Hydraulic power 3 kW → Hydraulic pipe clamping with adjustable clamping pressure → Programmable early mandrel retraction Options (can be ordered as additional equipment): → Variable bending speed using frequency converters or servo motors → Automatic tool retraction (manual or controlled) → Pneumatic chuck → Automatic mandrel lubrication → Pneumatic stop system (length + twist) → Mobile version (rollers) → Radius extension Pictures show new machine

Condition: new, Year of construction: 2025, functionality: fully functional, total width: 913 mm, total length: 634 mm, total height: 1,700 mm, warranty duration: 12 months, compressed air connection: 6 bar, overall weight: 200 kg, power: 1.9 kW (2.58 HP), input voltage: 230 V, Semi-automatic tube filling machine. Efficiency up to 13 tubes per minute. Dose from 5ml to 270ml Tube diameter from 19mm to 50mm Tube height from 70 to 210mm Hjdpfx Aexx Uihjh Njng Made in Poland Machine available to view and test at the firm's premises. Jedliński Packaging sp. z o.o. ul. Wodna 3 05-090, Raszyn Poland

Condition: used, functionality: fully functional, bar diameter (max.): 40 mm, pipe diameter (max.): 40 mm, pipe length (max.): 6,000 mm, tube wall thickness (max.): 3 mm, For sale: SOCO industrial tube cutting machine, equipped with an automatic loading system, ideal for series production and industrial lines. The machine ensures high precision, high productivity, and reliable operation, suitable for processing steel tubes. Main features: Brand: SOCO VS - 340 - NC Type: tube cutting machine Automatic loading for increased efficiency Hedpfsx Nhykex Ah Njng Precise and repeatable cuts Robust construction, typical of industrial equipment Suitable for medium and large-scale production Easy to integrate into a production line Condition: The machine is in good working condition Properly maintained Available for inspection and testing (upon request) 📍 Ideal for metalworking shops, factories, or metal component manufacturers. 👉 More technical details and operation videos can be provided upon request.

Condition: used, The PRS 76 is a top-tier Tube End Finishing Machine designed specifically for efficient tube and profile processing. This advanced machine features a powerful 3 kW motor that allows it to grind various materials effortlessly. With its innovative rotating design, the PRS 76 enables you to grind at any angle between 30° and 90°, accommodating diameters from Ø 20 mm to Ø 76 mm. It comes equipped with two K36 grinding belts, measuring 100 x 2000 mm, ensuring you have everything needed for optimal performance. Ideal for both tubes and profiles, the PRS 76 stands out for its ease of use and versatility. Enhance your workshop's capabilities with this robust machine. You can request a quote today to learn more about the PRS 76 and discover how it fits into your tube end finishing requirements. Hnsdpeuxdb Usfx Ah Nsg

Condition: ready for operation (used), Year of construction: 2010, travel distance X-axis: 6,500 mm, Movement X-Axis Movement 6500 mm This TRUMPF TruLaser Tube 7000 KT02 was manufactured in 2010. It features a working area of 6500 mm on the X-axis and can handle circular diameters up to 200 mm. Equipped with a CO₂ laser TruFlow 2000 and a laser cutting head with a 155 mm lens, it's ideal for precise tube cutting. Contact us for more information about this machine. Application Types Hnodpfx Asx D I H Djh Njg Cutting

Condition: new, Year of construction: 2025, Pipe Bending Machine Zopf Model KB 100: Capacity: - Maximum pipe diameter: 100x5 mm (St. 37) - Square profiles: 80x80x3 mm Hedpfex I Afxox Ah Nsng - Solid material: 45 mm - Maximum tool diameter: 900 mm - Bending angle up to 210 degrees - Bending speed: 0 - 2.2 RPM - Motor: 11 kW, 400 Volt, 50 Hz, 3-phase - Weight: 1850 kg - Dimensions: 140x80x160 cm Features: - Digital display - Programmable bending angle - With foot pedal - Equipped with inverter - Powerful motor and reduction gearbox for high torque - Control unit for setting the bending angle - Counter for positioning the counter bearing - Mobile control panel - Quick tool change - All shafts hardened and ground - Manual material clamping - Worktable made of CK 45 steel

Condition: good (used), Year of construction: 1990, Thread cutting machines with accessories Manufacturer SONE Type: 2000 . Hnodpfsvk D Rpex Ah Nsg 230V .

Condition: good (used), Thread cutter, thread cutting machine, thread drilling machine Hnjdpfeb A N Ihox Ah Njg -Integrated reversing gearbox: with rapid return -Nominal input: 230 watts -Max. cutting capacity: M6 -Connection: 230 volts -Weight: 2.5 kg

Condition: good (used), functionality: fully functional, Year of construction: 2025, machine/vehicle number: 0100-0149-2024, overall weight: 700 kg, total length: 3,500 mm, total width: 1,100 mm, total height: 1,500 mm, TECHNICAL DATA & EQUIPMENT: Suitable for flat material Working length: approx. 2500 mm PICK-UP NOTES: Hodsxm Symjpfx Ah Njng Collection must take place strictly between December 10th and 12th FCA Winterlingen, loaded onto truck

Condition: used, The RGM 2 is a state-of-the-art Tube End Finishing Machine designed by KNUTH, renowned for its robust and precise engineering. With a rigid design and a small footprint, this machine is perfectly suited for shops that require efficiency without sacrificing performance. The RGM 2 features an impact chuck at the front and a clamping chuck at the rear, ensuring secure handling of various tube sizes. Additionally, it includes a tube cutter and an inside tube deburrer, which provide a complete solution for finishing operations. For mobility, the machine is equipped with a mobile base. When looking for a reliable Tube End Finishing Machine, the RGM 2 stands out with its advanced features. Don't hesitate to request a quote today to enhance your tube processing capabilities with this exceptional product from the renowned KNUTH brand. Hnodjp Atgbepfx Ah Njg

Year of construction: 2019, condition: ready for operation (used), This Durma HD-TC60170 was manufactured in 2019. It features a 3kW IPG Fiber laser source, capable of 2.5D cutting, and handles up to 170mm pipes and 120x120cm tubes. It includes an exhaust system, spatter guard, bundle loader for serial work, and a chain loader for smaller jobs. The machine has a 6.5 meter inlet and a 4.5 meter outlet, extendable to 6 meters. Contact us for more information about this machine. Application Types Hnedpfex D Ir Tsx Ah Nog Cutting

Condition: like new (used), functionality: fully functional, Year of construction: 2021, operating hours: 3,793 h, control type: CNC control, laser source manufacturer: TRUMPF, laser hours: 3,793 h, laser power: 3,000 W, Equipment: CE marking, documentation/manual, Extended Standard Equipment External TruDisk 3001 solid-state laser with 1 laser light cable connection Machine bed for 6.5 m raw material length: Rigid machine frame with high-precision, hardened guideways. Enables high acceleration values and accuracy. LoadMaster Tube for 6.5 m raw material length with bundle tray Discharge station for finished parts up to 3 m (incl. conveyor belt with bin) Laser chiller unit (water-air) Compact dust extraction system Equipment Packages Additional Laser Equipment: - Thread forming technology package - Bevel cutting technology package and RapidCut - SeamLine Tube with inner weld seam detection - PierceLine - Clamping technology for round tubes up to 170 mm diameter - Compressed air cutting - Integrated camera system Programming - TruTops Tube including 3D tube design: TruTops Tube is a technology-focused programming system specifically developed by TRUMPF for tube and profile processing. With TruTops you have not just a CAD/CAM system, but also TRUMPF’s technological know-how in sheet metal working. The 3D tube design module is included in the programming system. - 3D tube interface: Easily import 3D data from CAD systems such as sat, igs, or stp files. - Positioning aid: Positioning aids are designed at the push of a button, simplifying subsequent manufacturing steps such as assembly and welding tasks. - Snap joint: Enables simple creation of corner joints that typically require two tubes, now possible with one tube via a snap joint. LoadMaster Tube 6.5 m Options - LoadMaster Tube 6.5 m low-scratch configuration: To minimize damage to sensitive workpieces, the loader section is equipped with plastic rollers, and additional contact surfaces are fitted with plastic strips. - Automatic tube feeding for diameters from 12 mm to 15 mm, semi-automatic in-feed with chain conveyor for tubes below 12 mm, manual feeding only - LoadMaster built for front-side (operator side) integration Hjdex Enacspfx Ah Nsng Technical Data Dimensions and Weights Example configuration: with 3 m discharge station, LoadMaster Tube - Width: 15,700 mm - Depth: 7,000 mm - Height: 4,000 mm - Weight: 16,300 kg Control Controller: Siemens 840DSL Color display: 19” touchscreen USB interface, RJ45 network connectivity Memory: 2 GB x 120 GB (4 GB for customers) Machine Working Area X tube axis: 6,500 mm A1 rotational axis (push chuck): n x 360˚ A2 rotational axis (feed station): n x 360˚ Speeds X tube axis (+): 170 m/min X tube axis (−): 120 m/min Y beam guide axis: 60 m/min Z beam guide axis: 60 m/min A1 rotational axis (push chuck): 780˚/sec A2 rotational axis (feed station): 780˚/sec Workpiece Dimensions Min. raw material remnant length: 120 mm Max. finished part length: 3,000 mm Max. finished part length incl. +1.5 m option: 4,500 mm Max. clamping diameter for round tubes: 152 mm Min. clamping diameter for round tubes: 20 mm (optionally 15 mm) Max. edge length for rectangular profiles: 150 mm (optionally 170 mm) Min. edge length for rectangular profiles: 20 mm (optionally 15 mm)

Condition: good (used), Year of construction: 1996, tube diameter 6 - 28 mm wall strength 2 mm bending radius min. 2 x D Control IPU 20 bending radius max. 5,0 x D mm bending angle max. 190 ° arbor length 3000 mm operating pressure 180 bar hydraulic motor 4 kW weight of the machine ca. 900 kg dimensions of the machine ca. 3,8 x 1,1 x 1,3 m Hnsdpfxjvtgn Ns Ah Neg Semi-automatic electro-hydr. mandrel tube bending machine with PLC control for 20 angles and display in the control panel for bending angle specification, angle detection and angle measurement via absolute value encoder, autom. tool plate reset, Turning device with digital display, hydr. quick chuck, aut. Mandrel lubrication, adjustable length stops. Operating modes: MANUAL and semi-automatic. Control buttons: hydraulics on / off, operating mode selection, clamp to / on, clamp forward / backward, mandrel forward / backward, bending forward / backward /, locking forward / backward, mandrel lubrication, turning device forward / backward, plate reset, length stop forward, emergency stop. The machine comes from a prototype construction and was only used a little until 2000. After that, the machines of this department were sold. However, the purchaser did not use the pipe bending machine and therefore it has only stood in the warehouse and has not worked since then ((original paint). Please notice that the price of a new machine today is over € 60.000,--. Machine dealer with own stock of 1600 m².

Condition: new, Cesurbend Mandrel Tube Bending Machine PBH-32 E Technical Specifications Max. tube diameter (mild steel): 32 mm Hodpfx Ahoxt Rcgo Nong Max. tube wall thickness (mm): 2 Max. bending angle (°): 190 Tube bending speed (rpm): 8.5 Max. bending radius (mm): 275 Bending motor power (kW): 2.2 Hydraulic motor power (kW): 1.5 Tube length (mm): 2000 Machine width (mm): 1000 Machine length (mm): 2300 Machine height (mm): 1050 Machine weight (kg): 400 Features • 4-way adjustable measuring device • 7" touchscreen colour display • 5 sequential twisting options • 100 program memory capacity • Omron PLC control

Condition: excellent (used), Year of construction: 2025, operating hours: 100 h, functionality: fully functional, machine/vehicle number: MT1212_2025_28, working range: 1,250 mm, overall weight: 1,400 kg, compressed air connection: 6 bar, total height: 1,610 mm, total length: 2,550 mm, type of input current: AC, warranty duration: 36 months, workpiece weight (max.): 80 kg, table width: 1,250 mm, air pressure: 6 bar, input current: 16 A, table length: 1,250 mm, space requirement height: 1,610 mm, space requirement length: 2,550 mm, space requirement width: 1,770 mm, Equipment: documentation/manual, rotational speed infinitely variable, Multitapper 1212 Automatic Threading Machine CoastOne - Made in Finland Demonstration Machine Machining area: 1250 x 1250 mm Thread sizes: M2-M10 Number of spindles: 3 (optionally 4) Hnodpfoxx R H Ajx Ah Nog 2 thread cutting and forming stations; 1 countersinking and drilling station Micro-lubrication for each spindle/tool station Control: TC15 touchscreen Numeric input, import of punch and NC files Warranty: 36 months after installation Immediately available; subject to prior sale Viewing under power is possible at any time by appointment

Condition: new, The RAX Tube End Finishing Machine from KNUTH is a motor-driven notcher designed for efficiently notching tubes made of steel and non-ferrous heavy metals. With its compact footprint, this versatile machine can accommodate various tube diameters ranging from 1/4" to 2", ensuring high productivity and low operational costs. The RAX operates with a powerful 1.5 kW main drive motor and is capable of cutting plate thicknesses of up to 3 mm, delivering clean cuts that require no rework. It's simple to use and can handle multiple tube sizes instantly, enhancing your workflow. You can easily operate this machine with standard 230 Volt connectivity. To learn more about how the RAX can benefit your tube processing, request a quote today. This robust notcher stands out in the Tube End Finishing Machines category, making it an essential addition to your Tube and Profile Processing solutions. Hjdpfx Aewhkf Toh Njng

Year of construction: 2024, condition: ready for operation (used), A combined Eisele system for the production of solar components from aluminum profiles is available. Profile processing capacity: 8 pieces/simultaneously, processing time for 8 profiles: approx. 18s, roller width: 500mm, roller distance: 250mm, roller load capacity: 500kg/m, total length: 6000mm, control: Siemens S7-1500. 1) Saw unit: power: 75kW, speed: 3500rpm, saw blade diameter: 500mm, residual piece length: 80mm, cutting range X/Y: 400mm/58mm. 2) Drilling unit: drilling spindles: 2x4, axes: 3, spindle distance: 35mm, spindle set distance: 80mm. 3) Feed unit: feed length range: 2mm-400mm. Without combination drill, saw blade, electric cabel. Documentation vorhanden. An on-site inspection is possible. Hnsdpfx Ahox Db Uzo Nsg

Condition: used, Year of construction: 1988, gebraucht Hnedpfx Ajxx A Eksh Nsg 1988 090151 prompt, Zwischenverkauf v Italien 12800 € 1 42 mm 4665 mm 800 mm 1160 mm 1470 kg 42 x 2,5 mm 40 x 1,2 mm 30 x 40 x 1,7 mm 40 x 30 x 1,3 mm 255 mm 22 mm 180 ° 90 °/s 5,5 kW 120 l Capacity specifications refer to 400 N/mm² Maximum bending radius with pipe guide rollers: 255 mm Maximum bending radius with pipe guide slide: 175 mm Minimum bending angle: 4° Maximum usable length without positioning device: 3900 mm Maximum usable length with positioning device: 3370 mm Adjustable mandrel extension travel from 8 mm Opening and closing travel of the counter-clamping jaws: 0-45 mm Opening and closing travel of the rollers or slides: 12-22-42 mm Operating manual in German Machine does not comply with AMVO or UVV regulations Tools not included

Condition: like new (used), Year of construction: 2021, functionality: fully functional, machine/vehicle number: 102075501_20, The machine has only been set up and tested – never put into production. Equipped with SDX dosing system. Includes format sets for 500 g and 1000 g sugar packaging. Hsdpfx Ahsx A Trij Neng

Condition: new, Year of construction: 2023, pipe drilling machine, inclined drilling machine, automatic drilling machine TDM100, manual, with one drilling head IMMEDIATELY AVAILABLE FROM STOCK + TO BE INSPECTED UNDER POWER Hnedpfjlgvkijx Ah Nsg - minimum quantity lubrication - manual material clamping - manual feed - max. tube length 3.000mm (option 6.000mm) - positioning accuracy +/- 0,2mm - 10 stops (can be extended as required) - manual insertion and removal of material - drill head swivels +/- 50 - manual 360 degree tube swiveling device - power drilling unit 1 x 2,2 kW - motor speed 295 - 2950 rpm - display speed on touch panel - illumination drilling unit - integrated tool cabinet - round tube up to 114mm - square up to 100 x 100mm - flat material up to 100 x 15mm - T-profile up to 100 x 100 x 12mm - L-profile up to 100 x 100 x 8mm - Double post up to 100 x 15mm - Flow drilling up to M12 - Drilling up to Ø 50mm

Condition: new, functionality: fully functional, Year of construction: 2025, warranty duration: 60 months, Effective Tube Cutting Length: 6500mm Laser Output Power: 6000w/3000w/2000w/1500w Effective Round Tube Cutting Diameter: Φ20-360mm Hnsdpjg D Nzisfx Ah Njg Effective Square Tube Cutting Diameter: □20*20-□254*254mm Edge Length: 20-300mm Outer Circle Diameter: ≤360mm Certification: CCC, CE, GS, ISO, Sgs Laser Source Brand: IPG/MAX Warranty: 3 years Power supply: 110V/220V/380V 50Hz/60Hz 1.Bigger than Bigger The maximum cutting diameter of T series is 30%longer than the mainstream products in the market ; The maximum cutting weight is 100% heavier than the mainstream products in the market. 2.Chuck position control, torque control function The position control CNC self-centering chuck with independent intellectual property rights can automatically clamp material according to the input tube size; Position monitoring in torque mode to ensure that the thick tube is not loosened and the small tube is not deformed;Brand new dust-proof structure, long-lasting use without lagging. 3.Edge-seeking, center-finding Brand new function of edge-seeking, center-finding. Optimized edge-finding method and algorithm, higher cutting precision and stability

Condition: new, The Hydraulic Tube Bender 1/2 is a compact and mobile Tube Bending Machine designed for bending steel tubes of larger diameters with a powerful manual hydraulic pump. This machine boasts a capacity of 10 tons and comes complete with dies for commonly used tube dimensions, allowing you to create bends of up to 90 degrees. With its robust 3-leg stand and 6 bending segments, it ensures stability and ease of use during operation. The included attachments cater to various diameters, making this versatile tool ideal for your tube and profile processing needs. You can efficiently bend tubes while enjoying the benefits of its portable design. If you require a reliable Tube Bending Machine, consider the Hydraulic Tube Bender 1/2 from KNUTH to enhance your workshop capabilities. Don't hesitate to request a quote today! Hnedpfx Aheuzlh Ie Nog

Condition: ready for operation (used), Year of construction: 1992, A semi-automatic tube filling and sealing machine Norden Machinery with chute and vacuum tipper is available. Filling volume range: 1ml-300ml, container volume: 90l, filling capacity: approx. 140tubes/min, machine dimensions X/Y/Z: approx. 2500mm/1400mm/2400mm, weight: approx. 3300kg. Documentation available. An on-site inspection is possible. Hnjdpfx Ahoxn Aage Nsg

Condition: used, Mandrel Tube Bending Machine 42 Hnedpfxewnrt Ss Ah Nsg Siegfried Volz Machine Tools Rüschebrinkstr. 151-153 D - 44143 Dortmund - Wambel

Condition: new, functionality: fully functional, Year of construction: 2025, degree of automation: semi-automatic, laser type: fiber laser, Equipment: CE marking, dust extraction, emergency stop, Diamond Tube Laser T9350 – Precision and Flexibility for Tube and Profile Processing The Diamond Tube Laser T9350 from Eckert Cutting is a state-of-the-art laser tube cutting system specifically designed for processing tubes and profiles. Its robust gantry construction and angled rack-and-pinion drive provide exceptional rigidity, stability, and speed. Thanks to an intelligent, pneumatically controlled clamping system and floating tube support, the machine securely holds tubes and profiles of varying shapes and lengths—ensuring consistently high cutting quality even with long parts. The system enables the processing of a wide range of tube and profile geometries, including round, square, rectangular, oval, elliptical, special profiles, channels (C), I- and H-beams, and many other shapes. Complex angled and bevel cuts of up to 45° are also possible (with optional 4-, 5-, or 6-axis heads). Additional highlights include: 360° processing with CNC-controlled self-centering, high cutting precision with finely defined cut edges, stable production even with long tubes, as well as options for series production and automation through optional loading systems. With its versatility and reliability, the Diamond Tube Laser T9350 is ideally suited for companies in metalworking, steel construction, mechanical engineering, and fabrication—anywhere precise tube and profile processing with high efficiency and repeatability is required. Hodpfxef Ak Swe Ah Nsng