Used Tube Threading Machine for sale (64,786)

Condition: good (used), Year of construction: 1981, Dimensions (L/W/H) 660x1050x1600 mm metric thread M 33 Messing metric thread M 16 Gußeisen metric thread M 14 Stahl no. of flutes 25x10mm 2x T-Nuten throat 220 mm Nodeul Eg Depfx Ad Necl weight 730 kg

Condition: ready for operation (used), functionality: fully functional, Year of construction: 1996, pipe diameter (max.): 127 mm, bending angle (max.): 182 °, bending radius (max.): 400 mm, mandrel length: 4,000 mm, overall weight: 16,000 kg, total length: 7,000 mm, total width: 2,200 mm, total height: 1,800 mm, input voltage: 400 V, type of input current: three-phase, feed length Z-axis: 4,000 mm, wall thickness: 5 mm, Equipment: documentation/manual, Capacity, Ø mm / 127 x 5 Radius, min./max. / 50/400 Bending speed/repeatability / 40º/s. ±0,1° Mandrel length 4 000 Weight, kg 16 000 Motor kW / 40 Length feed 900 mm/sec Ncedpou Rf E Eefx Ad Njl Degree of tolerance 0.05-0.1°/mm Tools: 63 mm

Condition: used, Table Drilling and Thread Cutting Machine IXION Type BT 15 GL Machine no.: Year of manufacture approx. 1975 Drilling capacity: 15 mm Spindle mount: Taper B 16 Thread cutting range: M 2.5 to M10 Throat depth: 200 mm Quill stroke: 90 mm Table size: 285 x 220 mm Column diameter: Ø 75 mm Spindle speed: 320–1600 rpm, 4 steps Motor power: 0.55 kW Power connection: 380 Volt, 50 Hz - Spindle speed adjustable in 4 belt stages - Equipped with FAHRION GH 10 tapping attachment - With thread pitch guide bush, operation without guide bush also possible - Drill head height adjustment via hand crank - Column lowers from table plate for drill head height adjustment Required space (L x W x H): 650 x 420 x 900 mm Weight: 86 kg Good condition Nsdpjwk Nxqefx Ad Necl

Condition: used, Thread cutting machine LORCH, SCHMIDT & Co Centre height: 200 mm Centre distance: 400 mm Spindle speed: 56 rpm Ncodpjxf Uwxofx Ad Nsl Chuck diameter: 160 mm Tailstock quill travel: 45 mm Tailstock taper: MK2 Motor power: 0.25 HP Power supply: 380 Volt, 50 Hz - Right- and left-hand rotation - 3-jaw chuck - Spindle drive via geared motor - Without through spindle bore - Tailstock with lever quill - Drill chuck MAS 1 to 16 mm Required space (L x W x H): 1200 x 500 x 420 mm Weight: 80 kg Good condition

Condition: new, Year of construction: 2025, functionality: fully functional, air pressure: 6 bar, Tube filling machine, tube filler Efficiency Up to 40 tubes per minute Dosing Range From 5 ml to 270 ml (High precision ensured by servo drives) Tube Diameter From 19 mm to 50 mm Tube Height From 70 mm to 210 mm Tube Material Heat-sealable (laminate/plastic) or aluminum tubes Dosing System Servo Drives (High repeatability) Control System PLC + Intuitive HMI Panel (with recipe saving capability) Formats One tube format included Automatic Tube Filling Machine JTB-40 Fenix | Up to 40 tubes/min | Wide Dosing Range: 5-270ml | Made in Europe. Professional Automatic Tube Filler JTB-40 Fenix - Perfect for Cosmetics, Chemicals and Pharmaceutical Production. We offer for sale the highly efficient, automatic Tube Filling Machine JTB-40 Fenix – a flagship model from Jedliński Packaging, designed for maximum precision and production flexibility. This reliable machine is the ideal solution for companies looking to optimize the tube packaging process for laminate (heat-sealable) and aluminum tubes. With a high output of up to 40 tubes per minute, the JTB-40 Fenix guarantees a significant acceleration of your production lines. Machine Dimensions and Ergonomics The JTB-40 Fenix Tube Filler features a compact, well-thought-out design, making it easy to integrate into existing lines: Height: 1.9 m Length: 1.7 m Width: 1.3 m Main Advantages and Standard Features Precise Dosing: The system based on servo drives ensures accurate dosing of products with various viscosities – perfect for tube filling creams, gels, pastes, and ointments. Process Automation: The machine automatically feeds, orients (using a marker sensor), fills, seals/closes, and codes the tubes, minimizing operator involvement.AISI 316 Materials: All parts in direct contact with the product are made of high-quality AISI 316 stainless steel – the standard required for cosmetics manufacturing and pharmaceuticals. Hot Air Sealing: The version for heat-sealable tubes uses reliable Hot Air sealing technology, ensuring an aesthetic and durable closure. Intuitive Operation: The control panel allows for quick parameter changes and switching between saved recipes.Inspection and ContactThe JTB-40 Fenix machine is available for immediate viewing and testing under load at our company premises. Please contact us to schedule a visit! Seller Contact Details: Company Jedliński Packaging sp. z o.o. Address ul. Wodna 3, 05-090 Raszyn, Poland Nsdpfsk Abyvjx Ad Nscl Location Machine available for viewing and testing at the company's premises Don't miss out! Invest in a new quality of packaging with the JTB-40 Fenix automatic tube filling machine.

Condition: good (used), functionality: fully functional, Thread cutting capacity in ST 60 M 22 Thread cutting capacity in cast iron M 27 8 speeds 180 - 1120 rpm Nedpfxsxx Ridj Ad Nocl Console version with height-adjustable head . with - or - without ROMAI multi-spindle .

Condition: new, Year of construction: 2025, laser hours: 20 h, laser power: 3,000 W, laser wavelength: 1,060 nm, sheet thickness steel (max.): 12 mm, sheet thickness aluminum (max.): 6 mm, overall weight: 3,600 kg, total length: 8,600 mm, total width: 1,400 mm, total height: 2,400 mm, working range: 6,100,230 mm, Equipment: cooling unit, ATTENTION: Demonstration machine - The K-Series sets standards in price and performance - it is a space-saving alternative to conventional tube laser cutting machines, and at an unbeatable price. With a length of just over 8 meters, it fits into almost any workshop. The time required to process bar stock such as round, rectangular, square tubes, and profiles is reduced to a minimum. Fully automatic or semi-automatic loading is also available. Ncjdpfx Aeh Igimjd Nol

Condition: new, Year of construction: 2025, laser type: fiber laser, laser power: 6,000 W, working range: 6,000 mm, Equipment: CE marking, cooling unit, documentation/manual, dust extraction, emergency stop, fume extraction, safety light barrier, We, Airtech Stickstoff GmbH, have been partners with Bodor Laser for 8 years. We offer customers cost-effective, up-to-date laser cutting machines that are economically viable. Comprehensive service as well as system setup with our own service team. German-language training is also part of our services. Top quality at top prices. Ncedpfewra Dyex Ad Nsl - Operable with or without loading system; here you have two options: fully automatic with bundle storage or a semi-automatic that can transport several rods of long material. - Simple programming. - 3 machine types with tube diameters up to 120 mm-350 mm available - Laser power up to 12 kW.

Condition: used, functionality: fully functional, Year of construction: 2001, pipe diameter (max.): 60 mm, power: 1.85 kW (2.52 HP), I-Beam steel, flat 100 x 15 (Ø 500) mm I-Beam steel, upright 50 x 10 (Ø 500) mm Angle steel 50 x 6.0 (Ø 600) mm Njdpfx Adewvrazo Nocl Round material 35.0 (Ø 500) mm Max. tube diameter 60 x 2.0 (Ø 1200) mm Square material 50 x 50 x 3 (Ø 1000) mm Bending speed 10.0 rpm Top roller diameter 165 mm Bore 40.0 mm Dimensions (L-W-H) 560 x 1430 x 980 mm Adjustment range: upper roller 124 mm Total power requirement 1.85 kW Weight 275 kg Low usage (!!) Manufacturer's list price incl. accessories approx. €12,500 Special price on request Equipment: - electro-hydraulic ring/profile bending machine - heavy and robust machine body - 2x powered rollers (MR2 series) - segmented roller dies - digital position display for top roller (0.1 mm) - manual upper roller adjustment - forward / reverse operation of bending rollers - Bending speed approx. 20% higher than comparable machines in its class - shafts made of forged & ground chrome-nickel steel - machine base frame - suitable for horizontal and vertical operation - mobile control panel - CE marking

Condition: good (used), Complete belt grinding installation, consisting of: GRIT GX 75-2H (2-speed belt grinder) GRIT GXC feed unit (centerless tube grinder) GRIT GXW cooling/lubrication module (for wet grinding) Suitable for tube processing, cylindrical grinding, deburring, surface finishing, and material preparation of steel and stainless steel. How does it work? The material (tube or rod) is placed in the GXC feed unit, which automatically and evenly feeds the workpiece along the sanding belt of the GX 75-2H. For intensive applications, the GXW cooling module supplies coolant to reduce heat and achieve a superior surface finish. This system operates as a centerless tube grinder, ideal for processing long tubes and series production. Technical specifications GRIT GX 75-2H Belt Grinder 2 belt speeds: 15 m/s and 30 m/s Power: 1.5 / 2.0 kW Belt dimensions: 75 × 2000 mm Nodpfjxw Nq Dox Ad Njcl Speed: 1500 / 3000 rpm GRIT GXC Feed Unit (Centerless Module) Feed speed: infinitely variable 0 – 2 m/min Workpiece diameter: Ø 10 – 100 mm Drive: 0.18 kW motor GRIT GXW Cooling Module Pump power: 0.06 kW Tank volume: approx. 20 liters Complete installation Total weight: approx. 160 kg Footprint: ± 120 × 60 × 120 cm Including 2 sanding belts (see photos)

Condition: ready for operation (used), functionality: fully functional, SASPI GV4-30 Nedow Uhrispfx Ad Njcl Min / max threaded diameter M4 / M14 Min / max threaded length 10-150 mm Motor power (ca) 32 kW Production speeds (ca) 50-200 parts/min Ready for production!

Condition: ready for operation (used), functionality: fully functional, SASPI GV3-20 Threaded diameter M4-M12 Shaft length under head 150 mm Max threaded length 130 mm Production rate 85-220 parts/min weight 4400 kg Ncedpexv Si Tsfx Ad Nel motor power 14 KW Condition is very good, ready for production

Condition: new, Cesurbend Mandrel Bending Machine/Tube Bending Machine PBNC-90 A Technical Specifications Max. Tube Diameter (mild steel): 90 mm Max. Tube Wall Thickness (mm): 4 Max. Bending Angle (°): 190 Tube Bending Rate (d/min): 3-6 Max. Hydraulic Pressure (bar): 200 Max. Bending Radius (mm): 250 Njdpfjxvzurex Ad Necl Tube Loading Length (mm): 3000 Bending Motor Power (kW): 15 Hydraulic Motor Power (kW): 5.5 Machine Width (mm): 1400 Machine Length (mm): 4500 Machine Height (mm): 1600 Machine Weight (kg): 3000 Features • On our standard NC machines, the distance and rotation after bending are achieved using the operator assistance and parallelism device. • You can bend more quickly and accurately by monitoring the progress and rotational positions of the bends carried out with our machines equipped with the NC Car System.

Condition: new, Cesurbend Mandrel Bending Machine/Tube Bending Machine PBNC-65 A Technical Specifications Max. tube diameter (mild steel) 63 mm Max. wall thickness (mm) 3 Max. bending angle (°) 190 Tube bending speed (d/min) 7-10 Max. hydraulic pressure (bar) 200 Max. bending radius (mm) 250 Min. bending radius (mm) 45 Tube length (mm) 4000 Bending tolerances (mm) ±0.25 mm Bending motor power (kW) 7.5 Hydraulic motor power (kW) 4 Oil tank capacity (l) 50 Machine width (mm) 1500 Machine length (mm) 6200 Machine height (mm) 1500 Machine weight (kg) 2000 Features Nodpfsxvzt Usx Ad Necl • The machine is equipped with 5 cylinders • On our standard NC machines, positioning and rotation after bending are achieved using the operator assistance and parallelism device. • You can bend faster and error-free by monitoring the progress and rotational positions of bends carried out with our machines equipped with an NC Car System.

Condition: new, Cesurbend CNC Tube and Pipe Bending Machine PBNC-51 A Technical Specifications Nodpfjxvzr Rox Ad Necl Max. Tube Diameter (Mild Steel): 51 mm Max. Tube Wall Thickness (mm): 3 Max. Bending Angle (°): 190 Tube Bending Speed (rpm): 7–10 Max. Hydraulic Pressure (bar): 200 Max. Bending Radius (mm): 250 Tube Length (mm): 4000 Bending Motor Power (kW): 5.5 Hydraulic Motor Power (kW): 3 Machine Width (mm): 1300 Machine Length (mm): 5750 Machine Height (mm): 1500 Machine Weight (kg): 2000 Features • On our standard NC machines, distance and rotation after bending are handled via operator assistance and parallelism devices. • Using our machines equipped with the NC Car System, you can monitor bend progress and rotational positions, enabling faster and error-free bending.

Year of construction: 2008, condition: used, “Alan Richardson” automatic pipe polishing machines can also be used for grinding, removing dirt, oxidation, rusting. The machine is in good used condition, fully working. Can be tested. Specification: Model: Alan Richardson Made in: England Year: 2008 Pipe length up to: 1700 mm Documentation: included Place: Marijampole, Lithuania If you have more questions, we will be happy to answer them. Ncedpfoph T N Ssx Ad Njl

Condition: ready for operation (used), Year of construction: 2005, - USED - TUBE BENDING MACHINE Nedpfx Adsvhc Uus Necl AXIS: 3 MAX TUBE DIAMETER: 30X2 mm WORKING LENGHT: 3000 mm X-AXIS POSITIONING SPEED: 900 mm/sec Y-AXIS BENDING SPEED: 200 °/sec Z-AXIS ROTATION SPEED: 360 °/sec MAX BENDING RADIUS: 20 A 170 mm CONTROL UNIT: DNC800

Condition: new, functionality: fully functional, Year of construction: 2025, control type: CNC control, actuation type: electric, laser type: fiber laser, laser power: 12,000 W, input voltage: 380 V, input frequency: 50 Hz, warranty duration: 24 months, Equipment: CE marking, centralized greasing system, cooling unit, documentation/manual, dust extraction, emergency stop, fume extraction, nozzle changer, safety light barrier, Equipment model: NS56FG Maximum tubelength: Nsdpfxeww Umaj Ad Nscl

Year of construction: 1995, condition: good (used), 2 Die Thread Rolling machine SENY, Type D-44 EH, Versatile for all types of work, manual and automatic cycles, easily adapted to automating loading,range of cycle times and roll speeds.operating pressure 100Kn, workpiwcw min 3mm max 40mm,lead 3,5 max, pitch of serrations 1,75mm max, roll length 80mm, diameter roll min 80mm max 120mm,roll spindle speeds 47-94, roll spindle diameter 40mm,distance between rolling spindles 80mm minim 165mm max, working stroke 7, feed 0,5mm/s minim 6mm/s maxim, rolling time,variable 0,1-100 seg, swivelling roll spindles +-5º,main motor 3Kw, connected electrical load 4,68kw, tank capacity 150L,aprox weigth 1100kg Nedpfspwbvkjx Ad Nocl

Condition: excellent (used), Year of construction: 2008, machine/vehicle number: 61108042022, 5-axis CNC tube bending machine BLM Dynamo ELE - MR200 Serial number: 61108042022 Year of construction: 2008 Machine weight: 1850 kg BLM bar loader BLM CARM 7 Serial number: 340380106175 Year of construction: 2008 Weight kg: 650 With conveyor belt Nodpfoqy E R Tox Ad Necl Without protective grid

Condition: good (used), functionality: fully functional, Year of construction: 1998, bending radius (max.): 600 mm, mandrel length: 1,200 mm, wall thickness: 8 mm, Transfluid DB 40100ST Mandrel bending machine Tube bending machine The above machine is a mandrel bending machine designed exclusively for the production of tubes and profiles with an outer diameter of 40-100 mm, max. 110x5 mm with a max. wall thickness of 8 mm or for the processing of solid materials with an outer diameter of up to 70 mm. Pipe push-on length/usable length: 1200 mm Radius range max:600 mm Bending height:1200 mm Machine data Length:4000 mm Width:2600 mm Nsdpfer H Havjx Ad Nscl Height:1400 mm Weight:9000 kg

Condition: used, functionality: fully functional, Year of construction: 1997, 5-axis CNC tube bending machine BLM Dynamo - 0 Serial number: 605970300001 Year of construction: 1997 Voltage: 380V 50HZ Ncodpot R Tgijfx Ad Nel Machine weight: 1500 kg Control system: DOC 85C BLM bar loader BLM CARM 7 Serial number: 340040102059 Year of construction: 2004 Weight: 405 kg Without conveyor belt Without protective grid TECHNICAL DETAILS Number of axes: 5 Average output: ~ 2400 bends/h Bending capacity round tube R=45 kg/mm²: 4 - 12.7 x 1.5 mm Bending capacity round tube R=35 kg/mm²: 4 - 14 x 1 mm Bending capacity round tube Al/Cu/Ms: 4 - 18 x 1.25 mm Bar feeder: BLM Carm 7 (year of manufacture: 2004) Positioning speed X-axis: 2000 mm/s Bending speed H/Z Y-axis: 500 °/s Turning speed Z-axis: 900 °/s Turning speed Z-axis: 100 °/s Positioning speed T-axis: 500 mm/s Measuring tolerance X/T axis: ± 0.1 mm Measuring tolerance Y/Z/Q axis: ± 0.1° Maximum range at maximum acceleration X-Y-Z: 1000 mm - 90/90/0° - 0/180/0° with tube 18 x 1.25 mm MACHINE DETAILS Voltage: 380 V, 50 Hz Hydraulic pressure: max. 120 bar Machine weight: 1500 kg Control system: DOC 85C Ex location Dortmund, free truck loading

Condition: good (used), Hagen & Goebel - HG 22 EB / Thread Cutting Machine - Model HG 22 EB - Speed range: 180-1120 rpm - Table dimensions: 600x500 mm - Foot switch Ncodpfxexvig Ne Ad Nsl Dimensions: LxWxH 1.1x0.7x2 meters / Weight 900 kg Subject to errors and omissions.

Condition: excellent (used), functionality: fully functional, Year of construction: 2021, operating hours: 600 h, control type: manual, degree of automation: semi-automatic, actuation type: hydraulic, pipe diameter (max.): 48 mm, pipe length (max.): 4,500 mm, tube wall thickness (max.): 4 mm, bending radius (max.): 96 mm, mandrel length: 4,500 mm, overall weight: 1,000 kg, For sale is a pipe bending machine, purchased in 2021 and used for only two years. Since then, it has been stored in a dry warehouse. It can bend pipes with a diameter from 12 mm to 48.3 mm and a wall thickness of 4.5 mm. Dies/jaws and mandrels for steel and stainless steel pipes are included. Self-collection required upon sale. Nedpfx Aexvhm Ied Nscl

Condition: ready for operation (used), Elgo CNC controlled machine, very easy and user-friendly max tube cap: dia 76 mm x 4 mm thickness max square tube: 70 x 70 mm max radius: 600 bending angle: 180° Standard tooling 3D Njdpfx Ajxpghqod Njcl Special tooling on request Length: 1200 mm Width: 800 mm Height: 1300 mm