Used Tube Production for sale (18,664)

Condition: used, MULTIHEAD TUBE CUTTING MACHINE MAIR TRA3000/7/8 Scope of supply: 1 Loading table with: - Motorised slings loader, to load the complete bundle - Lateral chain transport conveyor, to introduce the tube 1 by 1 - Top support with vertical adjustment (to avoid loading of 2 tubes when working with small diameters) - Length stop and tube loader 2 Cutting machine TRA3000 with: - 7 independent cutting heads - All cutting heads can be lifted independently - Linear guide with scale for positioning of the cutting heads - Centralised tube transport system with production cycle adjustment 3 Double collecting cradle RA3, with: - Independent cradles, to collect the cut tubes - Lateral separators between cradles, to adapt the cradle length to the tube length - Motorised endless slings for soft tube collection. Note: with the double craddle system, it is possible to make the bundling and strapping in collecting craddle nº1, while production continues, without machine stop. 4 Main electrical cabinet and operator control panel NOTE:  This machine has worked very few hours.  Mechanical condition is very good.  It only requires cleaning & repainting to be “as new” Max. input tube length: 8000 mm Bundle Loader: 3 Tn Max. loading capacity: 3000 Kg Round tubes (outer Ø): 12-60 mm Square tubes (HxW): 12x12-40x40 mm Rectangular tubes (HxW): 12x16-50x30 mm Thickness Min.-Max.: 0.8 - 3.0 mm (depending on yield) Cutting lengths: 330 - 7900 mm Hjdpfxoymaw Ue Agtjnt Max. straightness tolerance: 1 mm/m Number of cutting heads: 8 Motors power: 2.2 kW Cutting disc diameter: 300 mm

Condition: used, functionality: fully functional, Year of construction: 2007, operating hours: 22,372 h, laser hours: 11,345 h, laser power: 4,000 W, sheet thickness steel (max.): 20 mm, sheet thickness aluminum (max.): 8 mm, overall weight: 16,000 kg, total length: 11,600 mm, total width: 5,200 mm, total height: 2,200 mm, working range: 40,002,000 mm, Equipment: cooling unit, Standard Features: • Enclosed machine frame with integrated laser unit • Laser unit: TruFlow 2000 CO₂ laser with high-frequency excitation, maintenance-free turboradial blower, reflector telescope, cooling unit, logbook function • Automatic pallet changer • Longitudinal conveyor belt for small parts/waste • Drive: Maintenance-free three-phase servo motors • Cutting head quick-change device Laser cutting head with 5" lens and laser cutting head with 7.5" lens • Programmable cutting gas pressure setting • ControlLine capacitive height control and process control • Automatic focus adjustment with FocusLinePlus • Laser power control • Positioning laser • NitroLine high-pressure cutting • Fast processing with SprintLine • Automatic production of smaller holes • PlasmaLine plasma sensors Hnjdpfxjv Sm Rus Agtjt • Automatic sheet metal surface and edge detection • Programmable Performance cycles • Microweld • Spray device for safe thick sheet processing • Automatic blow-off system • Residual heat extraction • Sinumerik 840D control system: Open PC-based control, easy operation, online help, integrated e-shop, diagnostic functions, maintenance logbook, technology data, teleservice • TruTops Laser lite workshop programming Safety: • Multi-beam light barriers, fully encapsulated and ventilated beam guidance, monitoring system, multi-chamber extraction and compact dust extractor, protective cabin • RJ45 network connection via installation via teleservice • 3.5" floppy disk drive • TFT color display More powerful lasers: • TruFlow 4000, including NitroLine Plus, nitrogen beam tube ventilation and lens monitoring sensors Extended machine equipment: • PierceLine Process Control System • A total of 2 Machine auxiliary pallets, structural steel webs • Crane-mounted traverse for manual pallet handling • Pneumatic cutting

Condition: used, Double chamfering line TFA3/D/12.5 Tube facing & bevelling Hnjdoyl Upvopfx Agtjt The MAIR TFA3/D/12.5 double chamfering line is a high-performance industrial solution designed for simultaneous facing and internal/external bevelling of steel tubes. The line is capable of processing two tubes at the same time, finishing both ends with high precision and repeatability. Engineered for demanding production environments, this chamfering line is suitable for carbon steel tubes, hot or cold rolled, pickled or zinc-aluminium coated. Thanks to its CNC-controlled chamfering units, automated tube handling and integrated chip removal and blowing systems, the MAIR TFA3/D/12.5 ensures high productivity, consistent quality and reduced manual intervention. Scope of supply The complete MAIR TFA3/D/12.5 double chamfering line is composed of: · Accumulating table for single-tube extraction via chain conveyors · Walking beam system for synchronized transport of two tubes · Two CNC chamfering machines, each equipped with: - Heavy-duty welded steel frame - Double chamfering unit with servo-driven linear movement - Tube clamping devices with interchangeable jaws - Toolholder disks for facing and internal/external bevelling - Hydraulic tool locking system (Morse taper) - Centralized lubrication system - Presetting bench for toolholders - Control panel · Chip conveyors located under the machines · Driven rollways and adjustable tube clamping stations · Blowing station for internal tube cleaning with adjustable system · Set of tooling (to be confirmed) Technical data · Manufacturer: MAIR · Model: TFA3/D/12.5 · Application: Double tube facing and inside/outside bevelling · Tube diameter range: 17.2 – 89 mm (3/8" - 3") · Tube length: 4 – 12.5 m · Material: Carbon steel strip (hot rolled, cold rolled, pickled or zinc-aluminium coated) Tube diameter range: 17.2 – 89 mm (3/8" - 3") Tube length: 4 – 12.5 m Material: Carbon steel strip (hot rolled, cold rolled, pickled or zinc-aluminium coated)

Year of construction: 2003, condition: used, functionality: fully functional, machine/vehicle number: HWO 1/9-5.2​, - The system is located at the Geberit Keramik GmbH site in Wesel. - The system, including the associated safety technology, performs technical flash firing and re-firing and is prepared for this purpose. - Maximum firing temperature [°C] = 1300 - Current operating temperature [°C] = 1238 - Number of burner groups = 10 - Number of burners = 38 - Number of kiln cars = 18 Hnjdpfszu Nvzjx Agtst - Number of kiln cars in the kiln = 9 - Current firing cycle [h] = 17 - 23 - Gross energy consumption [kcal/kg] / [kWh/kg] = 785 / 0.912 - Specific energy consumption [kcal/kg] / [kWh/kg] = 1459 / 1.696 - Gas connection capacity [m³/h] = 770 - Usable waste heat [m³/h] = 4000 - Standard loading quantity [pieces] = 900-980 ceramic products Dimensions of the housing: - Length [m] = 14.4 - Width [m] = 6.4 - Height [m] = 5.7 - Volume density [m³] = 146.3 Dimensions of the kiln car: - Effective length [m] = 1.45 - Effective width [m] = 5.2 - Effective height [m] = 2.156 - Track gauge [m] = 1.5 (2x) Special features: In 2023, the kiln was completely overhauled and brought up to the latest state of the art. The following changes were made: - Renewal of the kiln roof: The fiber lining in the upper area was replaced with cordierite stones. - Renewal of the burners, including new nozzles, flame tubes and controllers. - Replacement of the media valves; installation of servo motors on the gas and air lines in front of the burners. - Installation of new software; the Simatec control panel was replaced – control is now exclusively via the PC. - Replacement of the O₂ control system; installation of a Zerox probe; installation of an O₂ analyzer for O₂ correction (to improve energy efficiency by approximately 12–14 %). - The system must be dismantled, packed and collected independently by the buyer.

Year of construction: 2008, condition: used, Guzzetti tube mill 76-200mm with a lot of tools and automatic stacker can be perfect solution for your tube production business. This line will allow you to produce huge range of round and rectangular pipes in very easy and automatic way. Line is equipped with important machines to make manufacturing process maximum convenient and productive. You can purchase machine as is where is or we can offer to make repair. Also we can provide shipping and installation service. If you start business with us you will never regret! Make: Guzzetti (Italy) Year: 2008 Automatic stacker: MAIR / Italy Tube range: D76- D200 Material’s thickness is 2-6mm (incl and SS) PLC – Siemens and all inverters and servo drives Welding aggregate is Thermomachine / Italy This line is also equipped and with the following machines: – Double dec.machine – Strips ends manually welding machine – Horizontal accumulator – 10 stations forming machine Material thickness is adjusting not manually – it is done by el.motors depend of el.indicators e. Welding aggregate is Thermomachine / Italy f. Cooling system g. System for automatic control of tubes sections dimensions h. 4 calibration stations + 4 TH The TH are with mechanical movements depend of necessary calibration. i. Fly cut-off unit is with two geared motors : one for hot cut off and another for cold cut off j. Automatic stacker is MAIR . Max tubes length is 12m. Packets for round tubes are hexagonal or octagonal types and for square tubes square or rectangular depend of tube’s dimensions. Tools available with machine: – Round Tube Hnedsi D D Efepfx Agtet Ø76,1 – 1 set Ø88,9 – 1 set Ø95 – 1 set Ø101,6 -1set Ø108-1set Ø114,3-1set Ø125 – 1 set Ø133-1set Ø150-1set Ø159-1set Ø188-1set – Rectangular tube 60×60 70×70 75×75 80×80 85×85 90×90 100×100 105×105 120×129 125×125 150×150

Condition: used, Year of construction: 2023, operating hours: 2,600 h, functionality: fully functional, total width: 18,500 mm, total length: 23,000 mm, compressed air connection: 6 bar, type of input current: three-phase, input current: 500 A, power: 275.5 kW (374.58 HP), space requirement length: 23,000 mm, space requirement width: 18,500 mm, For sale is a state-of-the-art, fully integrated wood pelletizing and shredding line (built in 2023) for processing A1-grade waste wood and disposable pallets into high-quality heating pellets. This turnkey complete system covers the entire process, from material feed to two-stage shredding, metal separation, suction and filtration technology, pelletizing, cooling, and bagging into big bags or smaller containers. Equipment: * Automatic scraper floor hopper with feeding system * AMIS shredder ZWS 1700 * High-performance cutting mill * Belt conveyor magnet and metal separator * SPÄNEX suction and filtration system with fire protection * GreCon spark detection system * 10 m³ material hopper with dosing system * 2 × ECOKRAFT pellet presses LP22 * Rotary screen systems with conveyor belts * Big bag system and semi-automatic bagging system Hnedjzhbf Iopfx Agtjt Technical data: * Year of manufacture: 2023 * Total connected load: 275.5 kW * Required fuse rating: 500 A / 400 V * Production capacity during test run: approx. 460 kg/h * Space requirement: approx. 23 × 18.5 m The system is in near-new condition and is available immediately. Detailed technical documentation with all components and specifications is available and will be provided upon request.

Condition: used, TUBE MILL OTO MILLS 219.10 The OTO MILLS 219.10 is a heavy-duty tube mill, characterized by its rigid mechanical construction and its integration of high-tier industrial components, making it a stable continuous, high-quality industrial production line. Technical specifications · Manufacturer: OTO MILLS · Tube diameter: 88.9 - 219 mm · Square: 90x90 - 200x200 mm. · Rectangular: 20x60 - 250x150 mm. · Thickness: 2.5 - 10 mm. · Speed: Max. 80 m/min · Coil weight: Max. 16 Ton Hnedpsym Dbdsfx Agtjt · Tube length: 6 - 12 m Scope of supply · Entry line · OTO 219.10 forming and sizing system · Cutoff and runout system · Electrical and electronic parts · Hydraulic system · Tooling · Thermatool HF welder cfi 600 kw · Double seam annealer (500 kw x 2) – Thermatool · Online Eddy current – Foerster · Semi-automatic packaging machine · Tube inside scarfing system – Alpha Metall Tube diameter: 88.9 - 219 mm Square: 90x90 - 200x200 mm. Rectangular: 20x60 - 250x150 mm. Thickness: 2.5 - 10 mm. Coil weight: Max. 16 Ton Tube length: 6 - 12 m Speed: Max. 80 m/min

Year of construction: 2017, condition: excellent (used), Tube cutting system with optical laser mark detection The FZH Vario Flex is a fully automated tube cutting system. It is specifically designed for the precise, reliable cutting of stainless steel tubes (e.g., for fuel, brake, air conditioning, or hydraulic lines). The system features optical laser mark detection. The control panel allows the user to select whether the cut is triggered mechanically (e.g., at the back of a union nut) or fully automatically via optical detection of a laser mark applied to the tube. Thanks to an integrated rotating 3-jaw cutting head and a micro-spray unit (minimum quantity lubrication), the machining process is extremely gentle on the tools. The tubes remain almost completely dry and free of heavy soiling. The entire process—from loading and clamping to cutting and unloading—is highly automated and follows a material-friendly cycle. Fully integrated labeling and traceability system: The system is designed to meet modern quality standards (Industry 4.0 / automotive). Following the cutting process, a barcode label is automatically generated, assigned, and printed to ensure seamless part traceability (tracking and system logging are directly integrated). Equipped with two separate bin discharge stations (rear-facing hatches with sliding doors), the system automatically switches to the second station when a bin is full. Finished KLT bins can be removed while the machine continues to operate, without interrupting the production cycle. Technical Data & Capacities Maximum tube length (feed): 1,000 mm Material specification: Optimized for stainless steel tubes (including those with pre-assembled union nuts or flared ends) Sensors & positioning: Optical sensors for automatic detection of laser markings on the workpiece Feed system: Automatic drum magazine / vertical disc feeder (for manual or automatic loading) Length adjustment: Continuously adjustable for different tube lengths via a manual handwheel Cutting method: Chip-removing sawing / rotating cutting head with three-jaw clamping and cutting mechanism (up to 600 rpm) Coolant/lubrication system: Integrated micro-spray unit (MMS) for minimum quantity lubrication Control system: Siemens SIMATIC HMI industrial PC with TFT monitor, keyboard, and mouse Setup mode: Mobile Siemens teach-in terminal for manual axis configuration and position storage Integrated labeling and barcode printing system Enclosure: Aluminum profile system with safety Makrolon panels Logistics / Output Integrated bin deposit station Hnedpfx Aezw Ukcegtjt 2 separate bin output stations for rear-side removal via protected interlock systems with sliding doors Suitable for standardized KLT containers (600x400 mm and 400x300 mm) Manufacturer: FZH Engineering GmbH Type / Platform: Vario Flex Year of manufacture: 2017 Material: Stainless steel Cutting head: Vario Flex Special features: Tubes with union nuts Diameter: Ø 6–76 mm Output length: L = 150–1,000 mm Cutting based on laser marking Wall thickness: 1 to 1.3 mm Condition: The system is in good visual and mechanical condition in excellent, clean condition. “Everything from a single source: We would be happy to offer you suitable bank financing for your project.” komplett-konzept.leasingo.de You can find more items—new and used—in our shop! International shipping costs on request!

Condition: new, Year of construction: 2020, functionality: fully functional, Equipment: documentation/manual, Brinox LEP 11 – Pharmaceutical Chromatography System with CIP Unit New, unused, original packaging Manufacturer: Brinox Model: LEP 11 Version: PP6711 with associated CIP unit CS6711 Condition: New – unused – original packaging (Factory New Condition) Description For sale is a Brinox LEP 11 pharmaceutical chromatography system, consisting of the chromatography panel PP6711 and the associated CIP unit CS6711. The system is completely new, unused, and in its original packaging. It was designed, manufactured, and delivered, but has never been installed or put into operation. This unit is designed for C1-INH chromatography and is used for controlled protein purification using sieve-bottom vessels in a GMP environment. Process Functions • Transfer of loaded QAE resin (slurry) • Washing and elution processes • Transfer of eluate to pre-precipitation vessel • Gel disposal via container station • Fully automatic CIP and SIP cleaning Technical Data • Fully CIP and SIP capable • Design pressure: –0.9 to +6 bar • Design temperature: +2°C to +95°C • Flow rate up to 10 m³/h • Adjustable slurry transfer 0.2 – 3 m³/h Design Features • Product-contact parts made of stainless steel 1.4435 • Electropolished Ra ≤ 0.8 µm • FDA and EU-compliant seals • Drainable construction • Cleanroom panel with tri-clamp connection points • Magnetically monitored transfer arcs • 0.2 µm vent filter Hodpfx Aoyl Ndnogtent CIP Unit CS6711 • Compact stainless steel skid • Centrifugal pump • Shell-and-tube heat exchanger • Adjustable operating pressure • GMP-compliant design The system is in factory-new condition and has never been used in production.

Condition: used, This listing for a 1 of 2 BD Max PCR Machine BD MAX System is intended for in vitro diagnostic (IVD) use in performing FDA cleared or approved nucleic acid testing in clinical laboratories. It is capable of automated extraction and purification of nucleic acids from multiple specimen types, as well as the automated amplification and detection of target nucleic acid sequences by fluorescence-based PCR. The BD MAX System is capable of: Independent nucleic acid extraction and purification with built in extractor. PCR amplification using thermal cycling across 24 lanes Real time detection of products of amplification Identification of each Sample Buffer tube by external barcode reader Work List verification by internal barcode reader Fluorescence detection at up to five wavelengths, allowing multiplex reactions by Cycle threshold (Ct) call, or multiplex reactions by melt analysis Qualitative, quantitative and melt sample analysis Features: Integrated and fully-automated extraction and thermocycling steps Processes and analyzes up to 24 specimens per run On-board lysis and extraction with pre-filled reagent strips Real-time PCR with two 24-lane microfluidic PCR readers Dedicated multi-color optics including: 475/520, 530/565, 585/630, 630/665, 680/715 Consistent results through standardized workflow and protocols Rapidly expanding menu and open-system options to help address emerging testing needs Less than one minute of hands on time per sample Electrical Requirements 100 to 240 V, 50/60 Hz, 10 A, 300 VA Max Hnsdpfx Agjxzgw Ajtst Dimensions: Weight 250 lb. Depth 28.5 in. Height 37 in. Width 29.7 in.

Year of construction: 2018, operating hours: 5,750 h, condition: used, functionality: fully functional, overall weight: 3,800 kg, total length: 7,650 mm, total width: 2,180 mm, total height: 3,000 mm, milling spindle speed (max.): 20,000 rpm, number of spindles: 1, type of cooling: water, machine/vehicle number: 1220099569, operating hours of spindle: 5,720 h, number of slots in tool magazine: 12, number of axes: 5, Elumatec SBZ 122/75, a 5-axis machining center for aluminum profiles. Due to a change in production to a tube laser system, we are selling our fully functional Elumatec SBZ 122/75. Service was performed by Elumatec in March 2026 (see attached maintenance report), and we have not used the machine since then. Interested parties are welcome to view and test the machine at any time. Special equipment (see also the attached invoice): - Length measurement on both sides Hnjdszz Tbhepfx Agtjt - 2 additional, automatically positionable material clamps - 1 additional material stop on the right side, allowing for the processing of oversized lengths - Control cabinet cooling Technical data (see also the attached brochure): - X-axis travel: 4176mm - Y-axis travel: 1040mm - Z-axis travel: 540mm - A-axis swivel angle: -120° to +120° freely programmable - C-axis swivel angle: -220° to +220° freely programmable - Max. machining length without end-face machining: 3851mm - Max. machining length with end-face machining: 3525mm - Tool changer with 12 positions - Saw blade diameter: 180mm - 6 material clamps - Tool holder: HSKF63 - Spindle power: 7kW / 20000 rpm, water-cooled - 2-layer machining - Minimum quantity lubrication - Central lubrication This very fast and agile machine with a 5-axis head leaves nothing to be desired. The machine is available immediately. Space requirements can be found in the layout in the appendix. You can also find the transport instructions in the appendix; please contact us if you have any questions. Dismantling, loading and transport should preferably be organized by the buyer due to the subsequent reassembly. Various auxiliary tools can be made available upon request, if available. All information and dimensions have been provided to the best of our knowledge and belief; however, no guarantee can be given for completeness and accuracy! The sale is made as is, without any guarantee, return policy or similar. Subject to prior sale.

Condition: new, functionality: fully functional, Year of construction: 2026, control type: CNC control, degree of automation: semi-automatic, actuation type: hydraulic, controller manufacturer: SIEMENS, laser type: fiber laser, laser source manufacturer: MAX Photonics, laser source model: CE, laser power: 3,000 W, sheet thickness (max.): 8 mm, sheet thickness steel (max.): 8 mm, sheet thickness stainless steel (max.): 6 mm, sheet thickness aluminum (max.): 6 mm, sheet thickness brass (max.): 6 mm, sheet thickness copper (max.): 6 mm, pipe diameter (max.): 260 mm, pipe length (max.): 6,050 mm, table length: 6,050 mm, working length: 6,000 mm, power: 3,000 kW (4,078.86 HP), input current: 32 A, input frequency: 50 Hz, type of input current: three-phase, type of cooling: water, Equipment: CE marking, centralized greasing system, cooling unit, dust extraction, emergency stop, fume extraction, safety light barrier, ACME LT-6026TFA Tube Laser System – Maximum Productivity for Tube Processing The ACME LT-6026TFA is a powerful tube and profile laser system for companies that require the highest precision, high processing speeds, and maximum automation in tube processing. Thanks to state-of-the-art fiber laser technology and automatic loading and unloading, the system is ideally suited for series manufacturers, metal fabricators, mechanical engineers, and industrial tube processors. Your advantages at a glance ✔ Fully automatic tube processing for maximum efficiency ✔ Suitable for round, square, rectangular, and special profiles ✔ High cutting quality with minimal post-processing effort ✔ Automatic loading and unloading system for short cycle times ✔ Powerful fiber laser technology for economical cutting ✔ High positioning and repeatability accuracy ✔ Intelligent clamping technology for safe material transport ✔ Optimized for series production and high utilization Technical highlights Tube lengths up to 6,000 mm Tube diameters up to 260 mm Powerful 3 kW fiber laser Automatic loading and unloading system Precise machining of complex contours and holes Fast changeover times for different tube geometries Modern CNC control system with intuitive operation For which applications is the LT-6026TFA suitable? The system is the ideal solution for: Steel construction Metal construction Mechanical engineering Vehicle construction Furniture industry Agricultural machinery construction Contract manufacturing Tube and profile processing By combining high cutting performance, automated material handling, and reliable process safety, the ACME LT-6026TFA significantly increases productivity while reducing manufacturing costs. Hsdjzb Um Topfx Agtsnt Why a tube laser system from ACME? The LT-6026TFA impresses with its robust machine construction, high availability, and economical production. Companies benefit from short cycle times, precise cutting results, and a future-proof automation solution for modern tube processing. Laser Handels und Service GmbH Your partner for tube lasers, flatbed lasers, laser welding technology, spare parts, and service. Consulting, installation, training, and technical support from Germany.

Condition: excellent (used), Year of construction: 2022, functionality: fully functional, operating hours: 200 h, power: 11.5 kW (15.64 HP), input voltage: 192 V, input current: 60 A, temperature: 1,350 °C, inner dimension length: 1,500 mm, inner dimension width: 100 mm, inner dimension height: 100 mm, total length: 2,000 mm, total width: 600 mm, total height: 600 mm, overall weight: 150 kg, number of chambers: 1, actuation type: electric, fuel type: electric, year of last overhaul: 2025, Equipment: CE marking, documentation/manual, Carbolite Gero Tube Furnace – 1350 °C, Ø 100 mm, Length 1500 mm – Fully Functional Hnsdoy H E Ndspfx Agtet For sale is a high-quality tube furnace from Carbolite Gero in excellent technical condition. The furnace has only been operated for approx. 200 hours and was primarily used for sintering copper at around 1000 °C. Thanks to the maximum temperature rating of 1350 °C, the system was never thermally overstressed and therefore remains in well-maintained condition. 🔧 Technical Specifications - Max. temperature: 1350 °C - Tube diameter: 100 mm - Tube length: 1500 mm - Temperature measurement: internal thermocouple → precise process control - Features: water-cooled flanges 🔩 Condition & Notes - Furnace is fully operational - Supplied ceramic tube shows signs of previous use Recommendation: - Replace with new ceramic tube for high-temperature applications - Alternatively, use cost-effective metal tubes for operations below 1100 °C 💡 Benefits - Highly accurate temperature control via internal measurement (i.e., furnace temperature and ramps are regulated by an internal thermocouple, ensuring optimal sample temperature) - Ideal for precise sintering processes, heat treatment, and materials development - Robust industrial design from a reputable manufacturer 📦 Areas of Application - Metallurgy (e.g. copper, steel, ceramics, glass-ceramics, powder metallurgy) - Research & Development - Laboratory and small-scale production applications 🚚 Other - Inspection possible by appointment - Collection only

Year of construction: 2024, condition: like new (used), functionality: fully functional, machine/vehicle number: 40423, The MACSQuant Analyzer 16 is a benchtop, automated flow cytometer engineered for multi-parameter cell analysis, offering convenience, sensitivity, and flexibility for both research applications and advanced cell therapy workflows. As part of the MACSQuant product line, this model improves upon previous generations by delivering 16 optical parameters (i.e., multiple fluorescence detection channels) while maintaining a compact footprint and a high degree of automation. Typical applications include immunology, immunophenotyping, cell and gene therapy (CGT) analytics, quality control processes, and general cell biology research. Key Features & Capabilities Highlighted advantages and system features: Feature Description / Details Optics & Detection - Outfitted with three spatially separated lasers: 405 nm, 488 nm, and 640 nm. - Provides 16 detection/optical parameters (multiple fluorescence channels, plus scatter signals). Hnjdpfx Agsxg Ndietet - Signal detection covers FSC (forward scatter), SSC (side scatter), and multiple fluorescence channels (e.g., V1–V5, B1–B6, R1–R3), each equipped with optimized photomultiplier tubes (PMTs). Fluidics / Sample Handling - Minimum sample uptake: as little as 1 µL (recommended ~25 µL for precise volumetric counting). - Adjustable sample flow rates: 25, 50, or 100 µL/min, or automated regulation to achieve target event rates (e.g., 500, 1,000, or 2,000 events/second). - Maximum event rate: up to approximately 15,000 events/second (ALT mode). - Compatible with various sample vessels, including 1.5, 2, and 5 mL tubes, tube racks, and 96-well plates. Transition between tubes and plates is user-friendly. - Utilizes an automated robotic needle arm for sample aspiration, thorough mixing, and automated washing of both the injection port and needle before and after runs. Automation & Workflow - Full automation for maintenance routines, PMT gain calibration, fluorescence compensation, sample acquisition, and analysis. - "Express Modes" (pre-set protocols) and templates support reproducible sample acquisition and data processing workflows. - Harmonization features for cross-instrument and multi-site data alignment, promoting data standardization for multi-center studies. - Regulatory and compliance support: offers 21 CFR Part 11-compatible features (audit trail, user management, electronic signatures, and reporting), making it ideal for clinical and translational research labs. Sensitivity & Performance - High fluorescence sensitivity: e.g., for standard dyes — FITC < 110 MESF, PE < 75 MESF, APC < 100 MESF - High precision:

Condition: used, Year of construction: 2019, machine/vehicle number: T17157, functionality: fully functional, operating hours: 32,000 h, input voltage: 40,000 V, input current: 4,000 A, input frequency: 10,600 Hz, type of input current: three-phase, oil tank capacity: 300 l, total length: 42,400 mm, total width: 11,200 mm, total height: 5,100 mm, overall weight: 107,250 kg, year of last overhaul: 2026, Equipment: 4th hydraulic function, CE marking, documentation/manual, safety light barrier, FOR SALE – BYSTRONIC FL400 TUBE & PROFILE LASER CUTTING SYSTEM High-Performance Laser Cutting Machine for Tubes, Profiles and Structural Sections As part of a strategic investment and the acquisition of a new MAZAK FG-400 NEO tube laser system, we offer for sale our Bystronic FL400 laser cutting machine. The machine has been operating in a professional steel service center and remains in daily production use. It is offered for sale due to replacement with a new system. _____ Hsdpfxezqudpe Agtsnt General Information: Machine: Bystronic FL400 Year of Manufacture: 2019 Installation & First Commissioning: October 2019 Current Location: Mikołów, Poland Condition: Fully operational and currently in production _____ Technical Specifications: Laser Source • CO₂ Laser Source • FANUC Resonator • Laser Power: 4,000 W Loading & Unloading Capacities • Maximum Loading Length: 14,000 mm • Maximum Unloading Length: 12,500 mm • Maximum Material Weight: 140 kg/m Round Tubes • Minimum Diameter: 40 mm • Maximum Diameter: 406.4 mm Square Profiles • Minimum Dimension: 40 mm • Maximum Dimension: 300 mm Rectangular Profiles • Maximum Section: 300 × 200 mm Structural Sections • HEA / HEB: 100 – 280 mm • IPE: 80 – 360 mm • UPN / UPE: 40 – 240 mm • Angle Sections (L): 40 – 280 mm Maximum Material Thickness • Mild Steel: 20 mm • Stainless Steel: 8 mm • Aluminum: 6 mm Operating Status • Resonator Operating Hours: approximately 32,000 h • Machine remains in regular production operation _____ Additional Information The machine has been operated in a professional Steel Service Center specializing in the processing of steel tubes, profiles, and structural sections. The equipment is available for inspection under power at our facility in Poland. Photographs, sample production parts, and videos of the machine in operation are available upon request. _____ Documentation and Technical Details Detailed technical specifications, machine documentation, maintenance records, and additional operating information will be provided to qualified buyers upon request. Disassembly, packaging, and transport of the machine are the responsibility of the buyer.

Condition: used, Year of construction: 2013, Drying chamber with false ceiling ventilation and frontal trolley loadingfor the production and conditioning of 3 mm oak lamellas, at initial moisture 12 tomax. 15 % / final humidity 7 %used, good conditionmake Mühlböcktype ZSWM2110-1180C - 1.0 l/h at 40° C over 30 % HFyear of construction 2013rated power 7 kW/15Afrequency 50 Hzcontrol voltage 24VDC/230VACprotection class IP54content:the chamber holds- 2 packages in width a 1.10 m - with 0.20 m space between each package- 1 package in height a 1.80 m - with 0.10 m thick underlays and a 0.10 m high free space- 2 packages in length a 2.20 m - plus 0.60 m free spaceThe chamber contains 4 stacking packages and has a total gross volume of 17.4 m²The chamber has a net capacity of 4 m³ of timber - with a timber thickness of 3 mm and a stacking strip thickness of 10 mmand 90 % width utilization with edged ble dimensions of each chamber: Width 2.40 m x height 2.30 m x length 5.00 m- aluminum cassette construction- aluminum frame- dimensionally stable rock wool insulation- aluminum trapezoidal sheet- snow load 100 kg/m²- 2-leaf hinged door- front loading- 2 fans a 3 kW (D=800 mm)- stainless steel/aluminum finned tube heating coil with 50 kW, flow temperature of 80 °C, return temperature 73°C- servo-controlled supply and exhaust air flaps- cold water spraying- chambers work fully automatically- computer control K5Disassembly: Customer locationhandover as viewedwithout guarantee and warranty Hnjdpfx Ajvwfhiogtot

Condition: good (used), functionality: fully functional, total height: 1,500 mm, total width: 1,700 mm, total length: 2,250 mm, type of input current: three-phase, overall weight: 500 kg, film width: 650 mm, compressed air connection: 6 bar, input voltage: 400 V, product height (max.): 199 mm, nominal power: 4.5 kW (6.12 HP), Side sealing machine – in very good condition, fully functional For sale is a high-quality side sealing machine in very good, well-maintained condition. The machine is fully functional and has been regularly serviced. The side sealing machine is ideal for the professional packaging of products with shrink film and ensures uniform, clean packaging results. Details: Very good, well-maintained condition Fully functional Uniform heat distribution Robust industrial design Ideal for production and packaging lines The machine can be inspected and tested on-site by arrangement. If you are interested or have any questions, please do not hesitate to contact us. Data sheet Box Motion Side Sealing Machine DEAPSS-5025BM Model DEAPSS-5025BM Applicable films (half-tube): POF / PP / PE Sealing mechanism 1: Longitudinal sealing (pneumatic) Sealing mechanism 2: Traveling transverse sealing (pneumatic) Sealing blade width (transverse): 500 mm Maximum product height: 199 mm Maximum format width (W + H): 450 mm* Maximum roll size (L x Ø): 650 x Ø 300 mm Machine size (L x W x H): 2250 x 1700 x 1500 mm Conveyor belt speed: 35 m / minute Maximum power consumption: 4.5 kW Hodpfx Agoy Ttrmotont Connection voltage: 400 V / 3 phases Sealing cycles: up to 100 pieces / minute Air pressure (dry air): 6.0 bar Machine weight: approx. 450 kg

Condition: new, Year of construction: 2026, CORMAK RBM 30HV Tube and Profile Bending Machine The CORMAK RBM 30HV tube and profile bending machine is a versatile three-roll, non-mandrel bending machine designed for professional bending of steel tubes, rectangular hollow sections, and solid bars. Its compact design, ability to operate in both vertical and horizontal positions, and precise upper roll adjustment make it an ideal solution for workshops, production facilities, and service companies where reliability, accuracy, and application flexibility are essential. Main Advantages of the Machine Non-mandrel bending system – enables bending without deformation of the cross-section, including applications requiring larger bending radii. Vertical and horizontal operation capability – provides flexibility in machine positioning depending on the workspace and production process. Precise upper roll adjustment with vernier scale – allows repeatable and controlled bending operations. Ground and hardened guide rolls – ensure accurate material guidance and long service life of working components. Hardened steel rolls – provide high wear resistance and maintain accuracy during long-term operation. Foot pedal control – enables convenient and ergonomic machine operation. Two-direction roll rotation – allows bending of complex shapes and closed arcs. Construction and Technology The CORMAK RBM 30HV is built on a rigid steel frame that provides resistance to deformation during bending operations. The 30 mm diameter rolls are made of hardened steel, ensuring durability even when working with demanding materials. The adjustable upper roll allows precise setting of the bending radius, while the 0.75 kW drive motor provides sufficient working force while maintaining compact machine dimensions. The machine can operate in both vertical and horizontal configurations, depending on the type of material being processed and available workspace. Precision and Work Efficiency Thanks to the three-roll bending system and precise pressure adjustment, the CORMAK RBM 30HV tube and profile bender provides high bending accuracy, even when processing thin-walled steel tubes and delicate closed profiles. The ability to rotate the rolls in both directions significantly simplifies the production of complex curves and spiral-shaped elements. The rotation speed of 9 rpm ensures an optimal working pace while maintaining full control over the bending process. Applications The CORMAK RBM 30HV is designed for light and medium-duty production and service applications. It is particularly suitable for: metalworking and fabrication workshops, light steel structure manufacturing, tube and profile fabrication in the furniture and fencing industries, Hsdju Snlkopfx Agtont production of decorative and functional shaped components. Standard Equipment Side guide rolls Foot pedal control system Technical documentation (DTR) in Polish CE Declaration of Conformity Technical Specifications Parameter Value Round tube capacity 30 × 1 mm Rectangular profile capacity 30 × 30 × 1 mm Round bar capacity 16 mm Solid rectangular bar capacity 30 × 10 mm Roll diameter 30 mm Roll speed 9 rpm Motor power 0.75 kW Power supply 3-phase, 400 V Dimensions (L × W × H) 1200 × 750 × 1210 mm Weight 252 kg Manufacturer: CORMAK

Condition: ready for operation (used), Cover SOE graver grinding machine Largest bore of the collet 17.5 mm Largest grinding length 90 mm Largest grinding angle 180° Largest sandable radius 10 mm Coarse displacement 100 mm Fine adjustment 15 mm Pivoting of the dividing head support 90° Hnodpfxjq U R Tzj Agtot Coarse adjustment of dividing head slide 40 mm Fine adjustment of dividing head slide 12 mm Height from center of tube guide to center of grinding spindle 140 mm Wheel size: 100 x 50 x 20 mm Accessories: Rail for twist drill Optics Collets Grinding wheels You are welcome to visit us for an inspection. We can also arrange a cost-effective forwarding agent for you. organize! You will receive a proper invoice. A net invoice can also be issued for foreign customers. Prerequisite is a valid VAT number. Subject to prior sale. Visit our store and have a look at our other offers. Company names and trademarks are the property of their owners and are used only to identify and describe the products. Deviations from technical data and errors in the description of the article may occur and are reserved.

Condition: used, functionality: unexamined, Year of construction: 1978, control type: manual, degree of automation: manual, actuation type: electric, number of rollers: 3, shaft diameter: 400 mm, roller diameter: 622 mm, rotational speed (min.): 2 rpm, rotational speed (max.): 4 rpm, rotational speed (distance/time): 4,900 mm/min, pipe diameter (max.): 254 mm, tube wall thickness (max.): 10 mm, overall weight: 22,000 kg, total length: 3,900 mm, total width: 2,600 mm, total height: 3,300 mm, Equipment: emergency stop, BOLDRINI BSA 40 – Heavy-duty profile bending machine / roll for profiles For sale: a heavy-duty industrial profile bending machine, model BOLDRINI BSA 40, manufactured by BOLDRINI S.p.A., Italy. The machine is designed for bending and rolling metal profiles, tubes, angle profiles, rails, flanges, T-profiles, double T-profiles, and other structural elements with a large radius. It is suitable for the production of metal structures, halls, shipbuilding, tubular structures, tanks, flanges, and heavy industrial fabrication. Key data: Manufacturer: BOLDRINI S.p.A. Model: BSA 40 Year of manufacture: 1978 Serial number: 5936 Machine type: profile bending machine / angle bending roll / section bending machine Working system: 3 rollers Control: manual / electromechanical Drive: electric Hedpfx Agezilzvjtsnt Weight: approximately 22,000 kg Condition: used, stored outside of a production line Available tools: set of rollers, dies, segments, and additional attachments, as shown in the pictures Approximate capacity according to model BSA 40: Angle profile: up to approximately 203 x 203 x 25 mm Tubes: up to approximately Ø254 mm Suitable for: tubes, L-profiles, T-profiles, double T-profiles, rails, flanges, and profiles with a large radius Equipment and features: The machine has a robust, heavy-duty construction, large working rollers, and mechanical adjustment via screw spindles. Working rollers, profile dies, additional segments, and attachments for various types of profiles are available. The electrical panel is present and includes contactors, relays, fuses, a transformer, terminal blocks, and controls. The machine has not been tested under load at the moment. Visible surface corrosion is present on some of the rollers, tools, and housing due to outdoor storage. An on-site inspection and electrical/mechanical check are recommended before commissioning.

Condition: used, Year of construction: 2005, machine/vehicle number: LC671, Used Tetra Pak A3 flex 100V 330 prismaTechnical Specifications & Performance DataThis used bottling line is a Tetra Pak aseptic carton filling and packaging solution configured for 330 ml Prisma cartons. The central filling machine is a Tetra Pak A3 FLEX 100V, built in 2005, designed for Brik carton handling with a pull-tab configuration. The line also includes a new Tetra Pak Cap 30 FLEX cap applicator, built in 2026, configured for 330 ml Prisma cartons with Dream Cap closures.Filling machine: Tetra Pak A3 FLEX 100VFiller year: 2005Carton format: 330 ml PrismaCarton type: Brik cartonClosure configurations: pull tab and Dream CapCap applicator: Tetra Pak Cap 30 FLEX, built in 2026OPTIONAL: Accumulator ACHX30 - 2010, 14713H Advanced Automation & Control SystemsThe equipment features an integrated operator HMI/control panel, electrical control cabinet, pneumatic service components, mechanical drives and adjustable machine mechanisms. The filling and cap-application stations are intended to operate as coordinated industrial packaging equipment, supporting controlled handling of carton material, carton formation, filling, closing and downstream transfer. Operator access areas include service platforms, stairs and access panels for operation and maintenance activities.Production Line Integration CapabilitiesThis complete aseptic carton line is arranged around the filling machine and cap application process for 330 ml Prisma Brik cartons. It can be integrated with product preparation, upstream aseptic processing and downstream industrial packaging machinery according to the intended beverage production layout. An optional accumulator is available to provide carton buffering between line sections and help maintain production continuity during downstream interruptions.Machine typeManufacturer / modelYearFilling MachineTetra Pak A3 FLEX 100V2005Capping MachineTetra Pak Cap 30 FLEX2026Accumulation SystemACHX302010Machine Condition & Maintenance HistoryThe line includes a used Tetra Pak A3 FLEX 100V filler built in 2005 and a new Tetra Pak Cap 30 FLEX cap applicator built in 2026. The optional used ACHX30 accumulator was built in 2010 and records 14,713.8 running hours. The stainless-steel enclosure, service platform, access ladder, pneumatic tubing, conveyor or product-transfer sections and machine adjustment components are visible on the equipment.Operational Performance & VersatilityThe Tetra Pak aseptic carton filling s... Hnjdpozw Dvnsfx Agtst

Condition: excellent (used), Year of construction: 2023, machine/vehicle number: 2804221, functionality: fully functional, input frequency: 50 Hz, type of input current: three-phase, volume flow: 18,000 m³/h, suction capacity: 18,000 m³/h, filter area: 60.6 m², actuation type: electric, The EK-24 unit is a dust and chip extraction and filtration system for wood and wood-based material processing. The unit is manufactured by the Polish company Euro-Komplex, which specializes in the design, production, and installation of comprehensive dust extraction systems used in various industries, particularly in woodworking and furniture factories. The filter effectively removes contaminants from multiple machines simultaneously, such as circular saws, panel saws, four-sided planers, veneer coating machines, CNC machines, milling plotters, and sanders. Technical specifications: • Airflow: 18,000 m³/h • Filtration area: 60.6 m² • Number of filters: 48 pcs / 2000mm / 200mm • Electrovibrator: 0.09 kW x 2 • Control cabinet with frequency converter • WTK fan • Air lock • Dry fire tube The filter's robust and solid construction is made of hot-dip galvanized or powder-coated steel with a thickness of 2mm, and the inlet tunnel and reinforcements are made of 3mm steel. The structural elements are fastened with 8.8 screws with Teflon inserts. It is worth noting that the filter basket used is uniform and smooth, without welded elements, which facilitates airflow with waste fractions without depositing them on the basket walls. The EK-24 is equipped with an 0.09 kW electrovibrator in an ATEX system, used to clean the filter bags made of antistatic and waterproof material with a weight of 350g/m² and an air permeability of 240l/dm²/min. The cleaning system is fully automated and operates in appropriately selected time cycles adapted to the type of dust being extracted. Thanks to the use of an air return lock (summer/winter flap), in winter, the cleaned and filtered air returns to the production hall, which has a very beneficial effect on maintaining the appropriate temperature and provides measurable financial benefits. The WTK fans used in the EK-24 have self-cleaning impellers and a reinforced design, which guarantees stable operation for a long time. Electrical control is carried out using a control unit equipped with protection and a time control system for the electrovibrator and the fan motor. The control cabinet is equipped with a frequency converter, which enables the adjustment of the fan motor speed and provides very precise control. Hsdpfx Aszba E Iogtjnt The air lock is used to separate the filter zone from the external zone. It blocks the airflow, allowing only wood chips to pass through, so they fall freely into the bag without an air blast. The air lock is equipped with a system that mitigates the impact of the impeller in case a large solid object enters the unit. It is equipped with a dry fire tube mounted on the filter, used to quickly supply water or extinguishing agent to the closed filter chamber using internal sprinklers. The installation is equipped with a fire brigade connection necessary to connect fire department equipment or a hose directly from a fire hydrant. The filter also has a pressure relief device, which lowers the pressure in the event of an explosion. It is designed to relieve an explosion developing inside a protected device, such as hoppers, silos, separators, filters, sorters, etc., where an explosion hazard exists. By releasing the explosion into the environment, the explosion pressure is reduced to a value below the allowable pressure resistance of the protected device.

Condition: used, Year of construction: 1992, Manufacturer : Norden Model : Nordenmatic 700 Year : 1992 Type: Automatic tube filling and sealing machine Capacity: 70 tubes max Filling volume: 1 - 300 ml Dosing accuracy: +/- 0.1-0.5% Tube size range: Length: 50-250 mm / Diameter: Ø 10-50 mm Empty tube feeding : automatic Hedpfjx R D Exsx Agtjnt Cleaning + Tube orientation device with a stepper motor Sealing Module: HA - Hot Air Number of buckets: 22 units Product feed hopper + dosing pump Vulcanic Vulcatherm cooling unit (year: 2004) - 3.5 kW (10°C - 35°C) / Outlet temperature: 25°C max - min 3°C Laminar flow Machine dimensions: 135 x 190 x 210 cm Weight : 2 400 kg Spare parts sold with the machine. Choose from two formats among many available formats (additional formats can be added as an option). Full documentation available Video in operation available

Condition: excellent (used), Year of construction: 2020, functionality: fully functional, Equipment: documentation/manual, LIQUIDATION SALE – COMPLETE STEAM BOILER SYSTEM – IMMEDIATE AVAILABILITY Due to the closure of the production facility, we offer for sale a complete industrial steam generation system based on a UNICAL BAHR’12 800 high-pressure steam boiler, manufactured in 2020. The system was used as a complete installation and is offered together with the burner, control system, water treatment equipment and fuel storage tanks. Main technical data • Manufacturer: UNICAL • Model: BAHR’12 800 • Year of manufacture: 2020 • Steam production capacity: 800 kg/h • Approximate useful thermal output: 545 kW • Maximum design pressure: up to 12 bar • Boiler type: horizontal fire-tube steam boiler Hnsdpoy N Sq Hefx Agtot • Fuel: light fuel oil • Condition: excellent, used • Functionality: fully functional • Complete technical documentation available The complete system includes: 1. UNICAL BAHR’12 800 steam boiler 2. RIELLO RL70 two-stage oil burner 3. Electrical control cabinet with automation 4. Boiler accessories and safety equipment 5. Water treatment station 6. Two double-walled fuel tanks, each with a capacity of 5,000 litres The BAHR’12 series is designed for industrial steam generation and features a robust fire-tube construction with a wet-back combustion chamber. The system is suitable for industrial process applications requiring a reliable steam supply. Key advantages • Complete and ready-to-relocate boiler installation • Relatively recent year of manufacture – 2020 • Boiler, burner, controls and auxiliary equipment offered as one package • Water treatment equipment included • Total fuel storage capacity of 10,000 litres • Full documentation available • Immediate availability The equipment can be inspected at the production facility in Panoszów, Poland. Liquidation price: EUR 59,000 net, EXW, negotiable. Preference will be given to buyers able to complete the transaction and collect the equipment quickly. Additional photographs, technical documentation and information concerning dismantling and loading are available upon request.

Year of construction: 2023, condition: used, VIOLI Drawing Bench VM/TRI25-3s Manufactured in 2023 The VIOLI Drawing Bench VM/TRI25-3s is a robust and innovative machine designed for precise and efficient metal drawing, featuring a 3-meter useful length and a powerful 2,500 kg pulling capacity. Its patented hydraulic system ensures linear pulling, compact design, and consistent quality. TECHNICAL SPECIFICATIONS Useful Length: 3 Meters Pulling Power: 2,500 kg Drawing force: Max. daN 2500 Operating hydraulic pressure: 180 bar Drawing speed: Min. 0 m/min. - Max. 17 m/min. Drawing reduction: Around 15% of the section Clamping force POINTER: 100 Ton Tolerance: 1 mm Power supply: 400 V - 50 Hz Electric power: 9,2 KW Hydraulic oil: ISO 46 Motor Power: 9.2 kW - 380 V, 50 Hz Noise: At the workplace LP < 70 dB(A) Hydraulic System: Proportional hydraulic pump Carriage Sliding: with ball circulation guides Construction and movable installation of a hale holder to house 1 O hales in line with the trolley; Predisposition for cooling the lubricating oil with the insertion of a stainless steel pipe coil in the tank; Adjustable Die holder; Bar support system; Tank with pump for lubrication; Opening/ closure of pliers operated manually by pneumatic pistan; Compliance: Machine comply with the UE conformity regulations. DETAILED FEATURES Operating System: The system uses a hydraulic piston and patented technology for optimizing space, ensuring linearity with the drawing hole, and minimizing bending of the supporting structure. It allows for a compact die length and double the useful pulling stroke. Caliper Return: A patented double-circuit chain technology returns the caliper to its starting point. This allows the hydraulic piston's length to be half of the useful working stroke. Pulling Power: The pulling power is in line with the drawing die. Speed Control: Manual adjustable speed from 0 to 16 meters per minute (0−16 Mt/m). It offers fine regulation of the speed and constant speed derived from the hydraulics. Tolerance: The tolerance is 1 mm. Hydraulic System: Features a proportional hydraulic pump. Motor Power: 9.2 kW - 380 V, 50 Hz. Carriage: Carriage sliding with ball circulation guides. Hole Holder: Construction and movable installation of a hole holder to house 10 holes in line with the trolley. Lubrication: Includes a lubrication tank with a lubrication pump. There is also a predisposition for cooling the lubricating oil with a stainless steel pipe coil in the tank. Die Holder: Adjustable. Bar Support: Includes a bar support system. Pliers Operation: Opening and closure of pliers are operated manually by a pneumatic piston. Control Panel: The machine is equipped with a control panel FUNCTION The hydraulic drawing bench VM/TRI253S is a machine used for the cold reduction of the cross section of a metallic rod, both with round or shaped profile, or of an empty or “animated” metallic tube. The reduction of the section is obtained by passing the product through a calibrated drawing die and pulling it, using a mechanical clamp with the force required to obtain the reduction of the section. COMPOSITION OF THE DRAWING BENCH The machine is composed of the following main components: - Metal structure - Carriage equipped with a hydraulically controlled clamp - Carriage drive unit - Hydraulic system - Electrical system Metal structure The metal structure is composed of a recirculating ball guide. At the end of the rails, a suitable sized plate supports t... Hsdpfx Ageyl U Sqotent