Used Tube Processing for sale (21,276)

Condition: reconditioned (used), Line HANDTMANN VF-616 + PVLH-228 Ncsdpoibaymjfx Ahvop

Condition: reconditioned (used), functionality: fully functional, Year of construction: 2013, operating hours: 42,900 h, control type: CNC control, degree of automation: automatic, laser type: fiber laser, laser source manufacturer: IPG, laser power: 1,000 W, pipe diameter (max.): 120 mm, pipe length (max.): 6,500 mm, workpiece weight (max.): 90 kg, power: 21 kW (28.55 HP), year of last overhaul: 2026, Equipment: CE marking, centralized greasing system, cooling unit, documentation/manual, dust extraction, emergency stop, fume extraction, safety light barrier, Workable dimentions: Round tube 12 - 120mm Rectangular tube 12 - 100mm Loading tube length 6500mm Maximum load cradle capacity 4000kg Ncsdpfx Aeyqx Tvjhvjp Maximum unload length 4500mm

Condition: good (used), Year of construction: 1996, control type: CNC control, Tube diameter: 4-28 mm Wall thickness: / mm Minimum bending radius: 1.5 x D - 2.0 x D mm Control: Siemens LOGO Delivery rate: 4.5 l/min Max. bending angle +/-: 190° Nominal pressure: 250 bar Operating pressure: 3095 bar Delivery rate: 4.5 l/min Total power requirement: 1.5 kW Ncodpfoyqxnasx Ahvsp Drive: Hydraulic cylinder and roller chain

Condition: used, Year of construction: 2014, We offer a Rühle HighTech Tumbler vacuum massager with cooling, type MGR 900, year 2014 – a device for professional massaging, curing, and marinating meat and poultry. It is the perfect solution for medium and large plants that expect high-quality products, full process control, and stable, industrial operation. The tumbler is equipped with a cooling jacket and a vacuum system, thanks to which the process takes place at a controlled temperature and under negative pressure of up to 95%, which improves brine binding, tenderness, and juiciness of the meat. The tank capacity is 900 liters. Inside the drum, there is a mixing arm with an adjustable speed range of -25 to +25 rpm, and the speed of the massaging arm can be set from 0 to 25 rpm. This allows the massage intensity to be perfectly matched to the type of product – from delicate poultry pieces to heavier pork or beef cuts. The massager also has a lifting device with a lifting capacity of 400 kg, allowing 200-liter trolleys to be loaded without excessive strain on the operators. The robust stainless steel construction and extensive electronic control system (HighTech Tumbler) allow recipes to be saved, repeatable work programs to be set, and easy servicing. Ncjdpoypm Niofx Ahvop Technical data: Manufacturer: Rühle Model/type: HighTech Tumbler MGR 900 Year of manufacture: 2014 Tank capacity: 900 l Max. filling: 675 l Working vacuum: 0-95% Cooling: R404A refrigerant, 0.76 kg Mixing arm speed: –25 to +25 rpm Massage arm speed: 0–25 rpm Load capacity: 400 kg Power supply: 400 V, 50/60 Hz, 3-phase AC / N / PE Power consumption: 16.1 kW Rated current: 31.4 A Machine weight: approx. 2100 kg Dimensions (W x H x D): 2183 x 3327 x 3488 mm The Rühle HighTech Tumbler MGR 900 vacuum tumbler – mixer with cooling is an excellent choice for plants that want to ensure high process repeatability and reliability in the production of hams, barbecue products, premium products, and a range of products requiring precise quality control.

Condition: excellent (used), Year of construction: 2019, Kolbe 52-120. 7.5kw 2019. Hardly done any work. Very clean and well looked after Nodpfx Ahjypc Arsvocp

Year of construction: 1996, condition: excellent (used), TUBE BLASTING MACHINE.Machine is used to clean the inner surface of the copper tube in a continuous process of blasting. Ncedpfx Aopmtb Rshvep

Year of construction: 2000, condition: excellent (used), SMS MEER CNC DOUBLE SIDED CHAMFERING MACHINE Manufacturer: SMS MEER Type: RFA 14 Yom: 2000 Working range: tube Ø 21,3 – 114,3 mm Wall thickness 2,3 - 11 mm Length: 6-12m Composed of two RFA14 chamfering machines with transport devices between the machines. The task of machines is to chamfer inside and outside both ends of the tubes. The range of diameters of chamfered tubes 21.3-114,3mm and wall thickness of 2.3-11mm in the length range of 6-12m. The task of transport in the area of the chamfering machines is to collect the tubes from the roller table and move them between the chamfering machines. Nodpsghrguefx Ahvecp

Year of construction: 1986, condition: like new (used), More information on request Ncedpfx Ajhmfnhshvop

Year of construction: 2004, condition: excellent (used), Type: HRA4/80-4 Pipes: Ø 6 ÷ 24 mm, wall thickness = 1 ÷ 2,5 mm • Point: Ø3 ÷ 12 mm Ncsdohmfh Hepfx Ahvjp

Condition: new, Year of construction: 2025, functionality: fully functional, machine/vehicle number: NM - SPM, total length: 13,500 mm, total width: 2,000 mm, total height: 1,800 mm, Can packaging conveyor with scales and 20 workstations Equipment description: workstations we can make how much you need. Each workstation has a KERN EMB 2000-2 scale Workplace size no larger than 10000mm Equipment width with workstations no larger than 2000mm Equipment height no larger than 1800mm • Equipment frames made of stainless steel AISI 304 • Belt-chain type and butterfly type • Conveyor for full boxes • Conveyor for empty cans • Two full can conveyors Nsdpfx Aow Afyhehvocp • Empty can feed conveyor • Adjustable speeds • Option to record the work results of each person and a total can counter at the end • At the workplace – Scales - Kerne • Custom-made table production at the line • Control box on one side • Equipment max. power consumption 4.5Kw • Control box to be agreed with the customer. KERN EMB 2000-2 (2000g, d=0.01g) precision scales. Weighing surface 150mm. Simple and convenient 2-button operation Tare function facilitates formulation work Extremely flat design Ready to use: batteries included 2. Empty cans (aluminum and metal) (99mm) feed conveyor at 2.5m height Equipment description: Equipment frame made of stainless steel AISI 304 Belt type Single line (for one type of cans) Adjustable feed speeds Can lifting speed 65 cans / 1min ( if needed ) Equipment max. power consumption – 0.55kW - Manufacturing time form first payment: 5 months - CE Certificate will be transferred with P/N act. - Warranty - 12 months from the moment of signing the P/N act Manufacturing time +- 4months

Condition: used, Tube bending machine, mandrel bending machine, bending machine for tubes and profiles Tube bending unit with SIEMENS servo motor and planetary gearbox Year of construction: 2003 Bending capacity: max. Ø 20 x 1 mm Bending radius: max. R 70 mm Bending angle: max. 200° - last used for round tube Ø 15.4 x 0.8 mm, R60 mm - Bending tools and bending jaws interchangeable - Bending tool drive via AC servo motor and Alpha spur gear, planetary gearbox - 2-part bending tool opens and closes via hydraulic stroke movement - MERKLE hydraulic round block cylinder, item 014445 for hydraulic tool opening - Pneumatic height adjustment of the bending jaw via Festo compressed air cylinder - without electrical control - without hydraulic unit Dimensions L/W/H 760 x 400 x 150 mm Ncsdpfx Ajd E A I Iohvep weight: approx. 60 kg good condition Removed from a functional special machine, tested before removal. Drive: Brushless permanent magnet servo motor SIEMENS Typ:1FK6061-7AF71-1EG0 Nominal torque = MO: 6.4 Nm Rated current = Io: 6.1 A Speed = n. max.: 5500 rpm - Brushless permanent magnet servo motor SIEMENS ----- 5 pieces available in right-hand version. 5 pieces available in left-hand version. The price quoted refers to 1 bending unit with servo motor. If required, we also sell individual assemblies of the bending unit. We also offer the electrical components for controlling the servo motor. We also offer hydraulic units.

Condition: used, Brush deburring machine, tube deburring machine ERINI type 250 Year of construction approx. 1995 Brush diameter 250 mm Brush width 25 - 60 mm Speed 1500 / 3000 rpm Power 2,2 / 2,8 kW Mains connection 380 Volt, 50 Hz - Material support - New deburring brush - Suction connection Ø 100 mm Space requirement L x W x H 620 x 500 x 1150 mm Weight 100 kg good condition Nedpfx Ahjpu R Ngevocp

Condition: used, Decoiler and recoiler for coil material HMS Type BA 1.5-06/80 Machine no. Year of manufacture: 1991 Coil weight max. 8000 kg Coil outside diameter max. 1600 mm (with coil car) Coil outside diameter max. 2000 mm (without coil car) Diameter of coil support disc Ø 1700 mm Coil inner diameter, expansion range: 460-520 mm Coil width, nominal width max. 630 mm Width of expansion jaws: 750 mm Height of mandrel above base plate: 1500 mm - Mandrel driven by hydraulic motor with gearbox and gearwheel - Pneumatic overrun brake on mandrel TWINFLEX - Hydraulic service brake - Hydraulic stop brake - Hydraulic expansion of the mandrel, centrally via wedge slider system - Hydraulic pressing arm with hydraulically driven double pivot roller - Coil car with 12 ton lifting capacity and 300 mm lift - Decoiler on above-floor traveling frame with powered cross-travel drive - Hydraulic unit installed externally (was also used for other functions on a strip processing line) - Without electrical control cabinet (there is a control cabinet which supplied the entire strip processing line) Transport dimensions L x W x H 3500 x 1900 x 2500 mm Net weight approx. 5 tons Ncodpshx R Etefx Ahvop Good condition – not electrically operational

Condition: used, functionality: fully functional, Year of construction: 2020, operating hours: 2,000 h, control type: CNC control, laser type: fiber laser, laser source manufacturer: MAX Photonics, laser hours: 2,000 h, laser power: 2,000 W, sheet thickness steel (max.): 10 mm, sheet thickness stainless steel (max.): 6 mm, sheet thickness aluminum (max.): 6 mm, sheet thickness brass (max.): 6 mm, sheet thickness copper (max.): 6 mm, pipe diameter (max.): 230 mm, pipe length (max.): 6,050 mm, working length: 6,500 mm, input voltage: 380 V, input current: 63 A, type of cooling: water, total length: 11,600 mm, total width: 3,000 mm, total height: 2,600 mm, Equipment: CE marking, centralized greasing system, cooling unit, documentation/manual, dust extraction, emergency stop, safety light barrier, For sale is a used Bodor T230 tube laser. Tube length 6000mm, diameter 230mm, unloading length 2000mm. The machine is in good condition and can be inspected. The system has been reliably serviced and maintained by our trained personnel. Operating manual, CE certificate, extraction system, etc. are included. Inspection in Mönchengladbach. Njdpfeypawyjx Ahvjcp

Condition: like new (used), Year of construction: 2018, functionality: fully functional, total height: 1,000 mm, total width: 660 mm, total length: 1,250 mm, HERBST HRV S7 Laboratory Cream Processing Plant This machine is designed for mixing creams and pasty materials. Mixing container approx. 7 litres capacity Stainless steel container with heatable double jacket Combination mixing tool integrated into the container lid Nedpeypak Hjfx Ahvscp Container vacuum-proof Ingegrated vacuum pump Manufacturer: Sonstige Year of construction: 2018 Floor Space: 100 x 66 x 125 cm

Condition: excellent (used), Offer for juice pressing line: - Flottweg B-FRU-1500 LR press, year 2004 - mill/crusher - mash pump - Flottweg control cabinet - juice pump - slotted filter for water from belt washing - water pump - pulp pump - process cabinet Nodoyc D N Topfx Ahvocp All machines and equipment are made of acid-resistant stainless steel. The price is for the complete set of machines.

Condition: new, Cutter Capacity: 25 liters Voltage: 380V / 50Hz / 3 phase Power: 1.5kW Speed: 1000-2000 rotating/min Ncodpfsylzd Hex Ahvsp Dimensions: 85x67x70cm Packing size: 93x78x71cm With a temperature probe and the net

Condition: repair required (used), functionality: not functional, Year of construction: 2004, CNC Tube Bending Machine Manufacturer: Schwarze-Robitec Model: CNC 80 E-MR Year of manufacture: 2004/2006 Condition: Needs repair CNC: PC control Beckhoff Technical Specifications: - Maximum tube diameter x wall thickness: 80 mm x 3 mm - Minimum tube outside diameter: 16 mm - Minimum bending radius (to tube centre): 25 mm - Maximum bending radius (to tube centre): 240 + 50 mm - Maximum bending angle: 180° - Maximum tube lift length: 1000 mm - Bending direction: right - Machine weight: 7000 kg - Total installed power: 39 kW - Voltage: 400 V / 50 Hz Ncodpexzubvefx Ahvep - Amperage: 100 A - Machine dimensions (L x W x H): 6.2 x 3.2 x 2 m Equipment / Accessories: - Hydraulic pressure and feed for slide rails - Automatic tube feed and rotation device - Electric mandrel bending device - Pneumatic mandrel rod safety device - PC control Beckhoff - Automatic central block lubrication - Laser scanner, safety guard Machine requires repair: The planetary gearbox of the transport trolley is defective and must be replaced. Spare parts costs according to offer: planetary gearbox €1,674 + gearbox flange €1,850 + pinion €850 + VAT Without installation. Cheap sale in current condition – sale as is. Immediately available, free loading onto truck included.

Condition: good (used), Year of construction: 2006, 1 x Italpast Pasta Cooler Model: RF 700 36 5A Year: 2006 Capable from 100kg to over 1000kgs per hour Located in Yorkshire, UK Ncjdpfx Aovyz U Dshvsp UKFM2-6645

Condition: new, Year of construction: 2026, Pressure blast cabinet for internal pipe blasting with turntable and manual blasting operation - Filter system - Turntable with prism for pipe support placement - Driven internal pipe lance - Program storage: travel path, feed rate, blow-off function Nsdpfx Ajyn Inwjhvecp - External blasting nozzle with oscillation (option)

Condition: new, Year of construction: 2024, functionality: fully functional, COMPLETE PLASTIC GRANULATION LINES We offer technologically advanced complete plastic granulation lines designed to meet customer needs. Koltex PRS is a Polish manufacturer of high quality machinery and equipment for the various stages of waste recycling: PP,PE,LDPE,LLDPE,PS,ABS,HDPE. We provide comprehensive solutions and support for machine configuration. The innovative technologies of our recycling systems guarantee the highest degree of user-friendliness and equipment efficiency. We offer all the machines needed to configure a complete plastic recycling line. Ncsdpfx Aouqmavjhvep The XR 8 granulation line is the latest model from Koltex Plastic Recycling Systems in the field of LDPE film processing. In addition to the well-known technological solutions used in standard extruders, a number of changes have been made to achieve high production rates while improving the quality of the regranulate achieved. The new system is characterized by low energy consumption and significantly simplified operation thanks to the new SMART software. Numerous modifications have reduced the machine footprint by 30% compared to the previous model, but also increased productivity by 45% while reducing energy requirements by around 15%. An intelligent temperature control system for the plastic in the Agglomerator and an automatic material dosing system ensure process stability. Thanks to the automation of the process, operator involvement has been reduced to a minimum. Our offer also includes: Complete systems for plastics recycling Mills Plastification systems, vibrating screens, centrifuges Screen changers Peripheral equipment Washing lines (DWFS®) Dynamic washing machines Drying separators Granulation and extrusion lines Service and spare parts You can find out more about our range of products in this area at our website

Condition: used, Bowl Volume: 250 liters Maximum Batch Capacity: Up to approx. 200 kg Installed Power: 5.5 kW – 8.5 kW Ncodpfx Ahsylnv Ajvsp Construction: Heavy-duty stainless steel (inox), robust industrial design Application: Designed for homogeneous blending of various meat formulations while preserving product structure and particle integrity The Laska ME 250 is recognized for its durability, reliability, and high efficiency in demanding production environments.

Condition: like new (used), Year of construction: 2016, Cutter GEA CutMaster 500 VACUUM After capital renovation 2016 year 3 months warranty for parts Nsdpfoyn Dy Nex Ahvecp

Condition: new, Cesurbend Mandrel Tube Bending Machine / Pipe Bender PBM-32 E Technical Specifications Max. tube diameter (mm): 32 Max. tube wall thickness (mm): 2 Max. bending angle (°): 190 Tube bending speed (rev/min): 8.5 Max. bending radius (mm): 275 Bending motor power (kW): 2.2 Tube length (mm): 2000 Machine width (mm): 1000 Machine length (mm): 2300 Machine height (mm): 1050 Machine weight (kg): 300 Features Njdpfxext Rbps Ahvscp • 4-way adjustable measuring device • 7" color touch display • 5 sequential rotation options • 100 program memory capacity • Omron PLC control

Condition: new, Cesurbend Tube Bending Machine / Pipe Bending Machine PBNC-38 Technical Specifications Max. tube diameter (mm): 38 Max. wall thickness (mm): 2 Max. bending angle (°): 190 Tube bending speed (rpm): 8-10 Max. bending radius (mm): 250 Tube length (mm): 2500 Bending motor power (kW): 3 Hydraulic motor power (kW): 1.5 Machine width (mm): 1400 Machine length (mm): 3250 Ncjdpfxext Rcto Ahvep Machine height (mm): 1200 Machine weight (kg): 700 Features • 4-position adjustable gauge • Option to use mandrel and spoon on NC machines • The carriage system is equipped with a linear guide rail and carriage • Connection equipment is standard. Mandrel and spoon are optional. • 7" color touchscreen display • 5 sequential twisting options • 100 program memory capacity • Omron PLC control