Milling motor for edge processing machines

Perske DKNS2007/2

Condition: used, Double end tenoner, edge processing machine, scoring motor, chipper motor, electric motor, spindle motor, milling motor -Power: 4.4 kW 2890 rpm at 50 Hz -Power: 6.6 kW 5880 rpm at 100 Hz -Voltage: 220/380 volts -Mounting shaft: Ø 35 mm -Tool: Ø 240 x 20 mm -Dimensions: 550/270/H150 mm -Weight: 51 kg Ijdpfob A Tbuex Afketh

Condition: new, Year of construction: 2024, Magnetic separator for chip transport line Pipe magnet with 4 magnetic plates (permanent magnet) Hinged door for easy removal of metal parts Isdpfxecqvhwo Afksth Pipe diameter: 180 mm Location: From stock 54634 Bitburg - available immediately -

Condition: new, functionality: fully functional, planing width: 530 mm, number of planer blades: 4, Equipment: motor brake, Houfek R 530 surface planer - 400V/50Hz, 5.5 kW (7.5 HP), width 530 mm 1.1 Motor 5.5 kW (7.5 HP), Tersa cutterhead 1.2 Total work table length 3100 mm 1.3 Dimension of the guide ruler 1300x150 mm with tiltable auxiliary ruler Iedpsu Rnqqsfx Afketh 1.4 Planed table 1.5 Upper control panel with ELGO Z60 digital display Electronic adjustment of the take-off 0 - 7 mm Tilt angle of the tiltable ruler 0°- 45° - Digital display Adjustment of the input table inclination (pointed/hollow joint) 1.6 Cover for the SUVAMATIC planing roller 1.7 4-knife planing roller D=120 mm 1.8 Automatic star/delta start of the motor 1.9 Electromagnetic brake 1.10 Suction nozzle with outlet D=150 mm 1.11 Blade setting gauge 1.12 Voltage 400V/50Hz 1.13 Packed in PE film as standard 1.14 Machine built according to CE power and safety standards

Condition: good (used), Swivel Spindle Milling Machine, Table Milling Machine, Bench Milling Machine -Spindle adjustment: height and angle -Swivel: -3° to 45° -Drive: 4.5/5.5 kW -Speed: 3000/4500/6000/9000/12000 rpm -Feed apparatus Holz-Her 3 rolls -Useful shaft length: 100 mm -Spindle: Ø 30 mm Itedpfx Afjh Nvyzskjh -Max. Milling cutter: Ø 220 mm -Dimensions: 1540/1100/H1520 mm -Weight: 962 kg

Condition: ready for operation (used), Year of construction: 1981, WEINIG Hydromat H25R, S/N 2603-624, year of manufacture 1981, with walk-in acoustic enclosure KASCHWIG – ALMOST NEW from 2017 Itsdpetkt Tpsfx Afkjh • Short infeed table with heavy-duty 6-roller infeed 1st spindle bottom 11.0 kW 2nd spindle right 11.0 kW 3rd spindle left 11.0 kW 4th spindle top 15.0 kW 5th spindle bottom 11.0 kW 6th spindle bottom 11.0 kW • Hydraulic feed 6-60 m/min. • Feed motor 22.0 kW • 4x powered table rollers • Spindle diameter 50 mm • Automatic table lubrication • Spindles 1 + 4 + 5 + 6 with counter-bearings • Spindles 1 + 4 with straight jointer • Feed rollers 170 mm • 4 pcs. hydro planer heads 150 mm • 6 pcs. hydro planer heads 250 mm • Extraction hood above the machine

Condition: used, - Working width (mm): 140 Ijdpfxjrg Exrj Afketh - Shafts: 7 1st shaft: bottom 2nd shaft: right 3rd shaft: left 4th shaft: right 5th wave: top 6th wave: bottom 7th wave: uni-wave

Condition: like new (used), Weinig Hydromat H22N four-side planer - German production Iedpjpvi Skofx Afketh - DTR - year of production 1992 - two rollers in the tabletop, milled before the first head - for wet wood TECHNICAL PARAMETERS: - planing width 220 mm - planing height 140 mm - spindle diameter 50 mm 1 lower head 7.5 kW 2 legal head 7.5 kW 3 left head 11 kW 4 upper head 7.5 kW 5 lower head 11 kW hydraulic feed pump motor power 15 kW feed speed smoothly adjustable up to 60 m/min feed on cardan shafts electric height adjustment pneumatic pressure five pulling rollers in the countertop eight steel upper pulling rollers one upper rubber pulling roller rests on horizontal spindles jointer on the lower spindles Transport dimensions 500x200x160 cm weight 4 tons

Condition: good (used), Year of construction: 1979, Spindle diameter: 30 mm Speeds: 2,800 – 4,500 – 6,500 – 10,000 rpm Motor: 10 HP Table dimensions: 1,100 x 1,000 mm Extraction port diameter: 2 x 120 mm Tilting range: -5 to +45 degrees Max. spindle stroke: 130 mm Various tools available at an additional cost Includes 4-roller feed unit HOLZHER Type 1112 Each with 4 feed speeds forward and reverse Itsdexran Njpfx Afkeh Custom-built table extension right & left With tools as shown in the picture

Year of construction: 1987, condition: ready for operation (used), A Weinig four-sided planer including automation, double cross-cut saw, infeed and extraction system is available. 1) Four-sided planer Weinig Hydromat 22 BL with automatic lubrication, year of manufacture: 1987, working width: 220mm, working height: 140mm, number of heads: 7, head arrangement: bottom/right/left/right/top/bottom/bottom, spindle diameter: 50mm. 2) Kellfass automation unit consisting of double cross-cut saw, length: 5000mm, buffer cross conveyor and pneumatic roller infeed. On-site inspection is possible. Iedpfev T Apcsx Afkjth

Condition: good (used), Four-sided planer WEINIG type U17N 8 spindles Working width up to 170 mm Working height up to 120 mm Itodpfx Aoupkc Ejfkjh feed infinitely variable 6-36 m/min