Used Trumatic for sale (74)

Condition: excellent (used), functionality: fully functional, Year of construction: 2008, laser power: 4,000 W, sheet thickness (max.): 20 mm, input voltage: 400 V, type of input current: AC, Input voltage: 400V AC Frequency: 50Hz Connected load: 88kVA Control voltage: 24V DC Required fuse protection: 3x160A Iijdpfxsycwwds Anzeg Laser power: 4,000W Compressed air connection: 7-10bar Nitrogen connection N2: 30bar Oxygen connection O2: 20bar Max. component size: 4,000x2,000x20mm Additional equipment: FEZER Maschinenfabrig GmbH – vacuum lifter V03004 (year: 03/99) STOPA Anlagenbau GmbH & CoKG – loading storage system – 084997 (load capacity: 3,000kg, year: 2008, sheet format: 2x4m, storage capacity: 30t, storage height: 5.36m, storage positions: 10) Overhead crane Loading and unloading stations

Condition: good (used), Year of construction: 1999, functionality: fully functional, Pressing force: 220 kN Sheet metal thickness – max.: 8 mm Travel distance – x: 3000 mm Travel distance – y: 1500 mm Positioning speed, X-axis: 90 m/min Positioning speed, Y-axis: 60 m/min Positioning speed, simulation: 108 m/min Positioning speed, rotary axis: 360 °/sec Punching diameter: 76.2 mm Workpiece weight: 150 kg Smallest programmable path dimension: 0.01 mm or 0.01° Ijdpjzil Dksfx Anzoig Tool stations: 15 pieces Tool change time: 1.5 - 6.5 sec Machine weight, approx.: 11,050 kg Dimensions: 6400 x 5800 x 2100 mm including setup cassettes including tool cabinet with tools including Quick-Set

Condition: used, functionality: fully functional, Year of construction: 2004, operating hours: 71,929 h, machine/vehicle number: A0220A0610, control type: NC control, degree of automation: automatic, actuation type: electric, controller manufacturer: SIEMENS, laser type: CO₂ laser, laser source manufacturer: TRUMPF, laser source model: TLF4000, laser hours: 31,707 h, laser power: 4,000 W, type of cooling: water, total length: 3,000 mm, total width: 1,500 mm, Equipment: centralized greasing system, cooling unit, documentation/manual, dust extraction, emergency stop, fume extraction, safety light barrier, Model Year: 2003 Resonator model: TLF4000 Total Cutting Hours: 14,124 hours Maintenance records are available for the machine since the year it was purchased. All functions of the machine are in working order. All maintenance has been completed thoroughly. The machine's RF tube has been recently replaced. The machine will be supplied with a Riedel cooling unit and a Vanterm suction unit. Total Operating Hours: 71,929 hours (This time only shows the number of hours the machine was on.) Ijdpezquhuofx Anzsig Total Laser Active Operating Hours: 31,707 (This time does not show the cutting hours; it only shows the hours the laser was active (on.) - In addition to sheet metal cutting, the machine also cuts pipes/profiles. - Cutting range: Black sheet metal 20mm max. Stainless steel: 8-10mm max. Aluminum: 5mm max. - Pallet dimensions: 1500x3000mm All maintenance on the machine has been performed on time and completely. Documentation is available. There are no malfunctioning parts on the machine.

Condition: ready for operation (used), Year of construction: 2002, operating hours: 23,182 h, punching force: 22 t, sheet thickness (max.): 8 mm, overall weight: 17,500 kg, controller manufacturer: SIEMENS, controller model: Sinumerik 840D, This 4-axis TRUMPF Trumatic 5000 R was manufactured in 2002. It features a maximum punching force of 220 kN and includes a Siemens Sinumerik control interface. The machine comes with a TRUMPF Quicksharp tool grinding machine and a large selection of punches, dies, and accessories. If you are looking to get high-quality punching capabilities, consider the TRUMPF Trumatic 5000 R CNC punching machine we have for sale. Contact us for further details. - Power Supply: 400 V / 50 Hz- Connected Load: 29 kVA- Control Voltage: 24V DC- Required Fuse Protection: 3x50 A- Compressed Air Connection: 7-14 bar- Additional Equipment: TRUMPF Quicksharp tool grinding machine, large selection of punches, dies, and accessories.- Reported Issues: Error message present; requires replacement of either Power module (18/36A 2-axis) or feed control (2-axis version). Ijdpfxozx Sw Ns Anzoig

Condition: used, Year of construction: 1998, functionality: fully functional, Punching force: 165 kN Iodozilz Aspfx Anzeig Working area: 2070 x 1280 mm Sheet metal thickness: 6.4 mm Control system: CC 220 Workpiece weight: 150 kg Punching diameter: 76.2 mm X-axis: 80 m/min Y-axis: 55 m/min Machine weight, approx.: 8000 kg

Condition: used, The resonator of a Trumpf laser resonator is for sale here in good, used condition, as can be seen in the pictures. Technical data: • Manufacturer: Trumpf Ijdjyfnb Sepfx Anzjig • Laser system: L-3050 (6kW, built in 2005) Shipping available on request (also internationally) You will receive an invoice with VAT shown separately. Viewing/collection is possible by arrangement in 42855 Remscheid. Sale from location 42855 Remscheid, free loading. Subject to errors in technical data and prior sale.

Condition: excellent (used), functionality: fully functional, Year of construction: 2010, Machine operates independently. Large format. Ijdpezdrnrefx Anzjig Brushing table. Blasted for 59,000 hours.

Condition: used, Year of construction: 2005, Punching capacity 220 kN plate thickness 8 mm working area 2535x1280 mm sheet thickness for stainless steel 4-6 mm Iisdozk Rfijpfx Anzsg

Year of construction: 1996, condition: ready for operation (used), A CNC punching and laser machine from Trumpf requiring repair, including laser source and high-frequency generator, is available. Cutting force: 220kN, laser power: 1500W, clamping power: 11kW, weight: approx. 18000kg. Error message: NCK deleted and buffer battery empty. An on-site inspection is possible. Iijdpfxjzfaale Anzeg

Condition: ready for operation (used), Year of construction: 1998, pressing force: 133 t, total width: 3,640 mm, total height: 2,690 mm, overall weight: 10,650 kg, travel distance X-axis: 600 mm, travel distance Z-axis: 2,310 mm, number of axes: 4, This 4-axis TRUMPF Trumatic Trumabend V130 was manufactured in 1998. It features a press force of 1300 kN and a bending length of 3060 mm. The machine has a weight of 10,650 kg and a throat depth of 410 mm. If you are looking to get high-quality bending capabilities, consider the TRUMPF Trumatic Trumabend V130 press brake we have for sale. Contact us for further details. • Distance between columns: 2,690 mm • Throat: 410 mm • Table width: 120 mm • Mounting height: 385 mm (standard) / 535 mm (extended height) • Working height: 1,050 mm • Y-axis: • Rapid speed: 200 mm/s • Working speed: 1–10 mm/s • Return speed: 135 mm/s • Stroke: 215 mm (standard) / 365 mm (extended height) • Positioning accuracy: 0.01 mm • X-axis: • Max gauge range: 860 mm • Travel: 600 mm • Positioning accuracy: 0.04 mm • Feed rate: 500 mm/s • R-axis: • Travel: 250 mm • Positioning accuracy: 0.08 mm • Feed rate: 300 mm/s • Z-axis: • Travel: 2,310 mm • Positioning accuracy: 0.06 mm • Feed rate: 1,000 mm/s • Electrical system power: 18.7 kW • Pneumatic system pressure: 6 ± 1 bar • Hydraulic oil capacity: not specified Iiodpfxjzf If Ae Anzeg Technical Specification Bending Length 3060 mm

Year of construction: 2019, condition: used, We are selling several used marking, beading, drawing, thread embossing, and tabbing tools from Pass Stanztechnik that were used on our Trumpf TruMatic 7000. We also have various smaller tools as well as spare and wear parts available. A complete list can be sent via email. Iiedpfx Ajyu Tl Uenzjg

Condition: ready for operation (used), Year of construction: 2006, laser power: 4,000 W, travel distance X-axis: 3,000 mm, travel distance Y-axis: 1,500 mm, travel distance Z-axis: 115 mm, overall weight: 11,500 kg, total width: 5,300 mm, total height: 2,000 mm, product length (max.): 9,800 mm, number of axes: 3, This 3-axis TRUMPF TRUMATIC L 3030 was manufactured in 2006. It features a working range of 3000 mm in the X direction and 1500 mm in the Y direction, with a maximum positioning speed of 60 m/min. The machine is equipped with a TRUMPF CNC path control based on Siemens SINUMERIK 840D. If you are looking to get high-quality laser cutting capabilities, consider the TRUMPF TRUMATIC L 3030 CO2 laser cutting machine we have for sale. Contact us for further details. • Max. positioning speed: 60 m/min (parallel to axes); 85 m/min (simultaneous) • Drive type: Maintenance-free three-phase AC servomotors on X, Y, Z • CNC control: TRUMPF CNC path control based on Siemens SINUMERIK 840D • Minimum programmable travel step: 0.01 mm • Positioning accuracy: ±0.1 mm • Average position dispersion: ±0.03 mm • Compressed air consumption: • With TLF 2000–3200: 31 m³/h (516 l/min) • With TLF 4000: 42 m³/h (700 l/min) • Laser power options (cw) and max. structural steel thickness: • TLF 2000: 2000 W / 12 mm • TLF 2700: 2700 W / 15 mm Iiedpszf H Aaofx Anzsg • TLF 3200: 3200 W / 20 mm • TLF 4000: 4000 W / 20 mm • Electrical connection and fuses (50 Hz / 400 V): • TLF 2000: 63 kVA / 100 A • TLF 2700: 71 kVA / 125 A • TLF 3200: 73 kVA / 125 A • TLF 4000: 88 kVA / 160 A Additional equipment • Dust extractor • Control cabinet • HF generator • Cooling unit

Year of construction: 2003, condition: ready for operation (used), Travel path X/Y/Z: 3000mm/1500mm/115mm, laser power: 5000W, cutting capacity mild steel/stainless steel/aluminium: 25mm/20mm/12mm, travel speed: 200m/min, cutting accuracy: 0.1mm. Machine dimensions X/Y/Z: 11000mm/4600mm/2400mm, weight: 12000kg, control: Siemens Sinumerik 840D. Includes conveyors, laser cutting heads with various lens sizes, Liftmaster R, and other peripheral equipment. Documentation available. An on-site inspection is possible. Iisdexaph Uopfx Anzeg

Year of construction: 1993, condition: ready for operation (used), A Trumpf punching machine still in operation, including a Trumalift loading and unloading unit that has not been used for a longer period, is available. 1) CNC punching machine Trumpf TruMatic 500, year of manufacture: 1993, max. punching force: 220kN, max. sheet thickness: 6.4mm, max. workpiece weight: 150kg, max. punching diameter: 76.2mm, simultaneous motion: 108m/min, stroke rate: 900/min, machine dimensions X/Y/Z: approx. 6700mm/5800mm/2200mm, weight: approx. 11000kg. 2) Trumpf Trumalift SheetMaster 1250 loading and unloading system, year of manufacture: 1993, max. sheet dimensions X/Y: 2500mm/1250mm, max. sheet thickness: approx. 8mm. Documentation available. An on-site inspection is possible. Iodpfx Ansyz Ap Rezeig

Year of construction: 1999, condition: ready for operation (used), Workpiece dimensions: 4000x2000x20mm, laser power: 4kW, connected load: 88kVA, nitrogen/ oxygen connection: 30/ 20bar, control system: Siemens 840D, length: 7000mm, width: 3600mm, height: 2300mm, weight: 12.5t. An on-site inspection is possible. Iedjy T N Ikjpfx Anzsig

Condition: ready for operation (used), Year of construction: 1991, punching force: 15 t, overall weight: 4,300 kg, product length (max.): 3,800 mm, CNC punching machine manufactured in 1991. This TRUMPF TRUMATIC 120R features a punching force of 15 tons and a maximum punching diameter of 38 mm. It offers a working area of 1000 x 2000 mm with repositioning and includes a complete set of tools. If you are looking to get high-quality punching capabilities, consider the TRUMPF TRUMATIC 120R machine we have for sale. Contact us for further details regarding this machine. • Maximum sheet thickness: 4 mm Iedpfoymz Rcox Anzoig • Maximum punching diameter: 38 mm • Working area without repositioning: 1000 x 1000 mm • Working area with one repositioning: 1000 x 2000 mm • X/Y axis speed: not specified • Rotation speed: 360 degrees per second (full rotation) • Maximum stroke rate: 340 strokes per minute • Control system: TRUMAGRAPH CC 200 • Automatic tool change: 9 tool stations • Power requirement: 15 kVA / 50 Hz • Documentation: Complete documentation included, together with machine history Additional equipment • Large set of tools • Two additional tables to extend the working area

Year of construction: 1994, condition: ready for operation (used), Working area: 3085x1650mm, max. punching force: 220kN, max. sheet thickness: 8mm, max. stroke rate: 750/min, max. workpiece weight: 230kg, max. punching diameter: 76mm, connected load: 19kVA, control: Bosch Trumagraph CC 20S, weight: 13.8t, operating hours: 84,400h, with storage interfaces for forward/backward storage, swing-back clamps, multitool control, air-suspended installation, chip conveyor with container, soft punch, thread forming and TrumaLift SheetMaster 1600 FMC, has been regularly serviced, on-site inspection is possible. Iiedpfsq Ewi Aex Anzog

Condition: ready for operation (used), Year of construction: 2004, laser power: 6,000 W, travel distance X-axis: 3,000 mm, travel distance Y-axis: 1,500 mm, travel distance Z-axis: 115 mm, number of axes: 3, This 3-axis TRUMPF Trumatic L3050 was manufactured in 2004. It features a working range of 3,000 x 1,500 x 115 mm and a maximum workpiece weight of 900 kg. The machine is equipped with a powerful 6 kW CO2 laser, capable of cutting through materials up to 25 mm thick for iron and stainless steel, and 15 mm for aluminum. If you are looking to get high-quality laser cutting capabilities, consider the TRUMPF Trumatic L3050 machine we have for sale. Contact us for further details. • Control system: Siemens Sinumerik 840 D • Working area: 3000 × 1500 × 100 mm • Paint: white RAL 9002 / gentian blue RAL 5010 Iijdpfx Aneym A Hrezog • Enclosed machine frame with integrated laser unit • Laser unit: CO₂ laser TLF 5000, high-frequency excited • Cooling unit, logbook function • Automatic pallet changer • Longitudinal conveyor for small parts/waste • Drives: gantry drive combined with linear direct drives • Laser power control • HI-LAS high-pressure cutting • PMS plasma sensor system • High-speed processing with SprintLas • ContourLas for producing small holes • Programmable power cycles • Microweld • Programmable cutting gas pressure control • Laser cutting head with 5" lens and 7.5" lens • Quick-change system for cutting heads • Automatic sheet edge detection • APC capacitive height control and process control • PCS (Process Control System) • Positioning laser diode • Automatic focus adjustment (AutoLas Plus) • Spray device for safe thick sheet processing • Automatic shutdown • Working area lighting • Max. workpiece weight: 900 kg • Positioning speed (X/Y): 200 m/min • Simultaneous positioning speed (X+Y): 300 m/min • Maximum iron thickness: 25 mm • Maximum stainless steel thickness: 25 mm • Maximum aluminum thickness: 15 mm • Sinumerik 840D control: • Open PC-based control system • Easy operation • Online help • Diagnostic functions • Maintenance logbook • Technology data • Remote service • Shopfloor programming: ToPs 100 lite • Safety • Multi-beam light barriers • Fully enclosed beam guidance with nitrogen ventilation • Monitoring system • Multi-chamber extraction and compact dust collector • Protective enclosure • Software for Machine System • TruTops Laser postprocessor TCL 3050 – 1 unit • Control system software Cell machine TCL3050 (2nd license) Additional equipment • TRUMPF LiftMaster loading and unloading unit (currently not installed) • Base unit incl. sheet separation device and thickness measuring system • Rack extension (R), interchangeable tines • Pallet handling extension (P) • Separation of thin sheets (1–2 mm) • Third position without unloading station • Unloading station • Stainless steel tines for low-scratch handling • LiftMaster base frame for warehouse connection and double loading/unloading carts • Safety devices: second light barrier circuit • Extended Machine Equipment • Cutting head with 3.75" lens for high-speed cutting • Additional cutting head with 10" lens for thick sheet processing • Automation Preparation (for future upgrade) • Preparation for LiftMaster (standard pallets) • Includes installation, commissioning, and training • Includes warranty, transport, and packaging • Network connection

Condition: excellent (used), Trumpf We offer a laser and punching machine here. Technical specifications: Power supply: 400V/50 Hz Fuse rating: 3 x 100 A Connected power: 65 kVA Working area X x Y without repositioning: Combined operation: 2585 x 1280 mm Punching operation: 2585 x 1370 mm Laser operation: 2585 x 1280 mm Performance: Laser power: 2000 W Maximum sheet thickness: 8 mm Maximum punching force (including 20 kN active back-up): 220 kN Active back-up (programmable in steps): 4.5-20 kN Maximum workpiece weight: 200 kg Maximum clearance height: Punching operation: 35 mm Laser operation: 22 mm Speeds: X-axis: 90 m/min Y-axis: 60 m/min Simultaneous stroke sequence: Punching: 900 strokes/min Marking: 2800 strokes/min C-axis: Punching: 60 revolutions/min Thread forming: 330 revolutions/min Tools: Tool stations on the linear magazine: 19 with 2 grippers Number of tools when using a multi-tool: 19 to 190 tools Rotation of all tools: 360° Tool change time: 1.5-5 s Maximum punching diameter: Single stroke: 76.2 mm on all tool stations Standard multi-cut: 200 mm Maximum bending height: 25 mm Iiedpszd Ulajfx Anzsg Maximum part size: 500 x 500 mm Accuracy: Positioning deviation: ± 0.1 mm Average positioning spread: ± 0.03 mm TRUMPF CNC control: Base: Siemens SINUMERIK 840D Type: TC 6000 L 1300 Loading and dismantling must be carried out by the buyer! Condition: used Scope of delivery: (See picture) (Changes and errors in the technical data are subject to change!) We will gladly answer any further questions you may have by phone.

Year of construction: 2006, operating hours: 46,547 h, condition: excellent (used), functionality: fully functional, Laser punch press Trumpf TruMatic 6000 L with TrumaLift SheetMaster, ToolMaster and GripMaster as well as and scissor lift table. Ijdpen Nxw Defx Anzeig SheetMaster: not only loads and unloads the machine, it also sorts the parts the parts reliably ToolMaster: automatically changes the tools quickly, safely and conveniently GripMaster: reliably moves residual grids and strips TECHNICAL DETAILS working area: 2585 x 1280 mm Control: Siemens Sinumerik 840 D laser power: 3200 watt sheet thickness mild steel: max. 8 mm sheet thickness stainless steel: max. 8 mm sheet thickness aluminum: max. 4 mm workpiece weight: max. 200 kg Accuracy: +/- 0.1 mm Punching force: 22 t punching diameter: max. 76,2 mm C-axis punching: 330 rpm stroke sequence: 450 - 1000 1/min stroke sequence marking: 2800 1/min MACHINE DETAILS Laser switch-on time: 46,547 h cutting time: 23.580 h length: 7500 mm width: 8100 mm height: 2400 mm Weight: 16000 kg (basic machine) Operating voltage: 400 V / 50 Hz Connected load: 76 kVA

Year of construction: 2022, condition: ready for operation (used), controller manufacturer: SIEMENS, table load: 3,000 kg, Automated sheet metal storage system manufactured in 2022. This TRUMPF Automated Sheet Metal Production System features a storage height of 7,900 mm and a maximum load per storage location of 3,000 kg. It includes 266 storage locations and supports sheet formats of 3,050 x 1,525 mm. If you are looking to get high-quality automated storage capabilities, consider the TRUMPF Automated Sheet Metal Production System we have for sale. Contact us for further details. • Storage system: STOPA Compact II • Type: Automated sheet metal storage system with chaotic storage management • Storage height: 7,900 mm • Sheet format: 3,050 x 1,525 mm • Maximum load per storage location: 3,000 kg • Number of storage locations: 266 • Total storage capacity: 798 t • Configuration: 8 sections/towers, up to 37 storage levels per section • Pallet format: GF 3050 x 1525 x 90 mm • Pallet types: SPO, SPMgl • Loading heights: 185 / 275 / 460 mm • Functions: Automatic material storage and retrieval; automatic material supply to connected production cells; storage interface for integrated production machines • Storage control • Server operating system: Windows Server 2022 • Central storage management and automated material flow management • Integration with TRUMPF production equipment • Connected production cells • TRUMPF TruLaser 5030 fiber (L76) • Machine type: CNC 2D fiber laser cutting machine • Working area: 3,000 x 1,500 mm • Laser source: TruDisk 6001, 6,000 W • CNC control: Siemens SINUMERIK 840D sl • TRUMPF TruMatic 6000 fiber • Machine type: Combined CNC punching and fiber laser cutting machine Iijdpszu Sugjfx Anzjg • Working area: 3,050 x 1,550 mm • Laser source: TruDisk 3001, 3,000 W • Maximum punching force: 180 kN • Linear tool magazine: 25 positions • TRUMPF TruBend Center 7030 (B34) – Cell 1 • Machine type: Automatic panel bending center • Max bending length: 3,123 mm • Max thickness: structural steel 3.0 mm; stainless steel 2.2 mm; aluminum 4.0 mm • Max box height: 220 mm • TRUMPF TruBend Center 7030 (B34) – Cell 2 • Same specifications as Cell 1 • System functionality (summary) • Central automated storage and retrieval of raw sheet material • Automatic supply of material to connected laser, punch-laser, and panel bending cells • Automatic transfer between storage and production stations • Centralized, high-capacity sheet handling • Main system configuration • 1 x STOPA Compact II automated sheet storage system • 1 x TRUMPF TruLaser 5030 fiber 2D laser cutting cell • 1 x TRUMPF TruMatic 6000 fiber punching and laser cutting cell • 2 x TRUMPF TruBend Center 7030 automatic panel bending cells Additional equipment • For TRUMPF TruLaser 5030 fiber (L76) • Automatic pallet changer • LiftMaster Compact 1530 (automatic loading and unloading) • STOPA storage connection/interface • For TRUMPF TruMatic 6000 fiber • SheetMaster 3000 x 1500 mm (automatic sheet handling) • GripMaster 3000 x 1500 mm • Storage system integration/interface • For TRUMPF TruBend Center 7030 (both cells) • 2-axis part manipulator • 5-axis rear stop • Rotary manipulator • ToolMaster Bend • Automatic loading and unloading • Storage interface • System-wide • Central storage management server (Windows Server 2022)

Condition: ready for operation (used), Year of construction: 2001, - USED - CO2 LASER CUTTING MACHINE WITH PALLET CHANGER X-AXIS TRAVEL: 3000 mm Y-AXIS TRAVEL: 1500 mm Z-AXIS TRAVEL: 115 mm WORKING AREA: 3000 x 1500 mm SOURCE: TLF 3000 TURBO ; 3000 W CONTROL UNIT: SIEMENS 840D WEIGHT: 11500 Kg OVERALL DIMENSIONS: 9800 x 5300 x 2000 mm Ijdpfx Aey T S Akonzjig NOTE: WITH LIBELLULA SOFTWARE

Year of construction: 2003, condition: good (used), Used quality Trumpf 5kw cnc laser 4metre x 2metre cutting bed Its just been serviced by Trumpf and outputting the same power as new. Very low hours for its age, very good condition, used intermittently on one shift and available to see in operation by appointment: Make – Trumpf Model – Trumatic L 4050 Laser type – TLF 5000TM / 5kw / 5000watts Year of manufacture – 2003 – commissioned 2004 Size – 4metre x 2 metre Features – Rotolas tube cutting facility (examples of parts just processed per photographs) Ijdpfxohcw Nzs Anzsig Hours – Laser turned on 33861 – Beam on 11480 Fully serviced with Trumpf uk

Condition: ready for operation (used), functionality: fully functional, Year of construction: 2010, operating hours: 55,582 h, machine/vehicle number: A0110A0058, controller model: BOSCH PNC-P, laser power: 2,000 W, number of slots in tool magazine: 21, TECHNICAL DETAILS Ijdpfxjyv Ddre Anzsig Working area: 2500 x 1250 mm Max. sheet thickness: 4.0 mm Max. punching force: 165 kN Max. active stripper force: 9 kN Max. workpiece weight: 120 kg Max. part chute size: 300 x 500 mm Speeds X-axis: 90 m/min Y-axis: 60 m/min Simultaneous (X and Y): 108 m/min C-axis punching: 60 rpm C-axis thread forming: 180 rpm Max. punching strokes (F=1 mm): 600 strokes/min Max. marking strokes: 1300 strokes/min Tools Number of tool and clamp stations: 21 Tool change time Single tool: 4.4 s Multitool: 2.2 s Laser Data Guaranteed maximum output: 2000 W Laser model: TCF1 Power distribution: TEM∞ Beam quality² K (M²): 0.9 (1.1) Laser gas (CO₂, N₂, He, Xe, CO) consumption for cutting gas⁴: max. 1 cylinder premix gas p.a. Laser cutting head lens size: 5" MACHINE DETAILS Control model: BOSCH PNC-P Laser system switch-on hours: 25,582 h Electrical consumption (laser unit): 65 kVA EQUIPMENT Sturdy C-frame Coordinate guidance with integrated linear scale 2 workpiece clamps Maintenance-free three-phase servomotors Brush tables HI-LAS high-pressure cutting High-speed processing with SprintLas Programmable scan feed Quick-change cutting head system APC capacitive height control Lens monitoring sensors Laser logbook function Compact nesting table Rotating tool holder Automatic repositioning with stripper Automatic part chute Sliding part container Spray lubrication for punch 2 lubricant containers Slug extraction Chip bin Hydraulic quick shut-off External control panel 15" TFT touchscreen color display USB stick interface 3.5" floppy disk drive Safety devices RJ45 network connection Network integration Comprehensive operating manual Remote diagnostics facility SPECIAL EQUIPMENT Thread forming function Softpunch function Vertically adjustable clamp Repositioning cylinder Vibration-damped installation Sensor for part chute Spray lubrication for die Brush-type loading/unloading assistance Note: The machine has already been dismantled (by a certified TRUMPF used machinery partner) and is ready for shipment.

Condition: ready for operation (used), Year of construction: 2001, operating hours: 65,000 h, laser power: 3,200 W, travel distance X-axis: 3,000 mm, travel distance Y-axis: 1,500 mm, travel distance Z-axis: 115 mm, number of axes: 3, CO2 laser cutting machine manufactured in 2001. This TRUMPF Trumatic L3030 features a laser power of up to 3208 W in CW mode, providing efficient cutting capabilities. It operates on a 3-phase AC supply. If you are looking to get high-quality cutting capabilities, consider the TRUMPF Trumatic L3030 machine we have for sale. Contact us for further details. • Electrical • Supply voltage: 400 V • Phases: 3-phase AC • Frequency: 50 Hz • Rated power: 73 kVA • Rated current: 105 A • Maximum fuse protection: 125 A • Control voltage: 24 V DC • Control • Control system: Siemens Sinumerik 840D (CNC) with TRUMPF TASC3 laser control • Control software version: 2.4 • Laser performance • CW mode power: • 100%: 3208 W • 85%: 2756 W • 75%: 2407 W Ijdpfxsyzymgo Anzsig • Pulsed (5 kHz) power: • 100%: 3208 W • 75%: 2416 W • 50%: 1610 W • 25%: 810 W • 10%: 328 W • 5%: 157 W • 1%: 0 W • RF/drive • Reflected RF power: 0.3 kW • Maximum CW RF amplitude: 100% • Switching frequency (CW): 50 kHz • Maximum pulse voltage: 10,000 V • Pressure and leakage • Operating pressure limits: 20.01–27.00 kPa • Maximum turbine pressure: 200 hPa • Leakage rate: 0.04 hPa/min • Thermal/CPU • Maximum CPU temperature: 49 °C • Actual CPU temperature: 43 °C • Optics/Alignment • Maximum beam alignment time: 600 s • Hours • Laser on hours: 65,000 h Additional equipment • RIEDEL chiller (cooling system) (2001), Type: L 15/21 TR3 • Supply voltage: 400 V • Phases: 3-phase • Frequency: 50 Hz • Nominal current: 42 A • Protection class: IP54 • Refrigerant: R134a • Refrigerant charge: 11.5 kg • Maximum water pressure: 20.2 bar