Laser Punch Press

TRUMPF TruMatic 6000 L

Condition: excellent (used), Year of construction: 2006, Operating hours: 88,979 h, Functionality: fully functional, Punching force: 22 t, Laser power: 3,200 W, Travel distance X-axis: 2,585 mm, Travel distance Y-axis: 1,280 mm, Scope of delivery: - Gripmaster - Toolmaster - Sheetmaster Ughqpeanit - No cassettes TECHNICAL DETAILS Punching work area: 3,085 x 1,370 mm Laser working area: 3,085 x 1,280 mm Combined working area: 2,585 x 1,280 mm Control system: Siemens Sinumerik 840 D Laser power: 3,200 watts Wavelength: 10.6 µm Sheet thickness: max. 8 mm Workpiece weight: max. 200 kg Hold-down device: 4.5 - 20 kN Punching force: 220 kN Linear magazine: 19 tools with 2 clamps Tool change time: 1.5 - 5 s Programmable chute: 500 x 500 mm Positioning speed X / Y / simultaneous: 90 / 60 / 108 m/min C-axis punching: 60 rpm C-axis thread forming: 180 rpm Punching stroke sequence: 900 1/min Stroke sequence marking: 2800 1/min Position deviation: ± 0.10 mm Position spread: ± 0.03 mm MACHINE DETAILS (basic machine) Length: 7,500 mm Width: 8,100 mm Height: 2,400 mm Weight: 16,000 kg Operating voltage: 400 V / 50 Hz Connected load: 76 kVA Compressed air connection: 7 ± 1 bar Laser gas consumption CO2 / N2 / He: 1 / 6 / 13 l/h

Condition: ready for operation (used), Year of construction: 2005, Operating hours: 13,549 h, Functionality: fully functional, Punching force: 22 t, Workpiece weight (max.): 200 kg, Laser power: 3,200 W, Sheet thickness (max.): 8 mm, TECHNICAL DETAILS Punching work area: 2,585 x 1,280 mm Laser working area: 3,085 x 1,370 mm Combined working area: 3,085 x 1,280 mm Control system: Siemens Sinumerik 840 D Laser power: 140 - 3,200 watts Wavelength: 10.6 µm Sheet thickness: 8 mm Cutting capacity mild steel: 8 mm Gxcx0Ey Cutting capacity aluminum: 3 mm Cutting capacity stainless steel: 4 mm Workpiece weight: max. 200 kg Punching force: 220 kN Active hold-down device: 4.5 - 20 kN Linear magazine: 21 tools with 3 clamps Programmable chute: 500 x 500 mm C-axis punching: 60 rpm C-axis thread forming: 180 rpm Punching stroke sequence: 900 rpm Stroke sequence marking: 2800 1/min Compressed air connection: 7 ± 1 bar Laser gas consumption CO2 / N2 / He: 1 / 6 / 13 l/h MACHINE DETAILS Length: approx. 7.5 m Width: approx. 8.1 m Height: 2.4 m Weight: 16 tons Laser switch-on time: 49,949 h Cutting time: 13,549 h EQUIPMENT - Sturdy C-frame - 2 x clamping claws - Drives: Maintenance-free three-phase servomotors - Programmable hold-down device for repositioning - Sensor-monitored parts chutes 500 x 500 mm for punching and laser station, ejection cylinder on laser chute - 2 x good parts box - HI-LAS high-pressure cutting - Fast processing with SprintLas - ContourLas for producing small holes - Cutting gas pressure setting programmable - Laser cutting head: 5" lens, quick-change device, distance control APC - Lens monitoring sensor system - Additional cutting head with 7.5" lens - Punching head: hydr. mono tool holder, 360° rotation for all tools, automatic tool length compensation, tool spray lubrication, 2 x lubricant containers, punching slug extraction, chip bucket - Safety: multi-beam light barriers, quick shut-off hydraulics, extraction and compact dust protection device against stray radiation on the cutting head - TLF 3200 laser incl. 9" cutting head for stainless steel - AutoLas Plus - MultiTool function - MultiBend function - Thread forming function - Marking/quick beading function - Rolling technology function - Softpunch function - 1 x additional clamping claw - Chip conveyor with tilting container - Brush tables with loading and unloading aid - Blow-out device for small parts - BNC network connection instead of RJ45 connection

Condition: good (used), Year of construction: 2004, Catalog No. : 7781 Chapfqqhqq Type: TruMatic 6000 L Producer: Trumpf Made in: 2004 Characteristic: Total hours: 60387 h Hours on: 46171 h Pressing force: 220 kN Laser power: 2 kW Maximum weight of the sheet metal: 200 kg Travel length X-axis: 2585 mm Travel length Y-axis: 1280 mm Machine height: 2400 mm Machine length: 8100 mm Machine width: 7500 mm Machine weight: 16000 kg

Condition: good (used), Year of construction: 2008, Punching force 220 kN Laser power in watts 2,700 Travel distance - x 3085 mm Travel distance - y 1740 mm Sheet thickness 6.4 mm Cutting capacity for mild steel 8 mm Cutting capacity for aluminum 4 mm Cutting capacity for stainless steel 6 mm Workpiece weight 230 kg Laser On: 18,538 h Dpmbqd Beam On: 72,918 h

Condition: excellent (used), Trumpf Here we offer a laser and punching machine. Technical data: Mains : 400V/50 Hz Fuse protection : 3 x 100 A Connected load 65 kVA Working range X x Y without repositioning Combined operation 2585 x 1280 mm Punching operation 2585 x 1370 mm Laser operation 2585 x 1280 mm Performance: Laser 2000 W Maximum sheet thickness 8mm Maximum punching force (incl. 20 kN blank holder) 220 kN Qpql0Qzq Active blank holder (programmable in steps) 4.5-20 kN Maximum workpiece weight 200 kg Maximum passage height In punching mode 35mm 1m Laser operation 22mm Speeds: X-axis 90 m/min Y-axis 60 m/min Simultaneous stroke sequence Punching 900 min Marking 2800 min C-axis Punching 60 revolutions/min Thread forming 330 rpm Tools Tool places on the linear magazine 19 with 2 clamps Number of tools when using multitool 19 to 190 tools Rotation of all tools 360 Tool change time 1.5-5 s Maximum punching diameter Single stroke 76.2 mm on all tool positions Standard multicut 200mm Maximum bevel height 25mm Maximum part size 500 x500 mm Accuracy: Position deviation ± 0.1 mm Mean position dispersion ±0.03 mm TRUMPF CNC control : Basis: Siemens SINUMERIK 840D Type: TC 6000 L 1300 Sale ex location! Loading and disassembly must be taken over by the buyer! Condition: used / used Scope of delivery: (See picture) (Changes and errors in the technical data, specifications are reserved!) Further questions we can answer on the phone for you.

Condition: excellent (used), Year of construction: 2006, Operating hours: 88,979 h, Functionality: fully functional, Punching force: 22 t, Laser power: 3,200 W, Travel distance X-axis: 2,585 mm, Travel distance Y-axis: 1,280 mm, Scope of delivery: - Gripmaster - Toolmaster - Sheetmaster - No cassettes TECHNICAL DETAILS Punching work area: 3,085 x 1,370 mm Laser working area: 3,085 x 1,280 mm Combined working area: 2,585 x 1,280 mm Coibwtdzxc Control system: Siemens Sinumerik 840 D Laser power: 3,200 watts Wavelength: 10.6 µm Sheet thickness: max. 8 mm Workpiece weight: max. 200 kg Hold-down device: 4.5 - 20 kN Punching force: 220 kN Linear magazine: 19 tools with 2 clamps Tool change time: 1.5 - 5 s Programmable chute: 500 x 500 mm Positioning speed X / Y / simultaneous: 90 / 60 / 108 m/min C-axis punching: 60 rpm C-axis thread forming: 180 rpm Punching stroke sequence: 900 1/min Stroke sequence marking: 2800 1/min Position deviation: ± 0.10 mm Position spread: ± 0.03 mm MACHINE DETAILS (basic machine) Length: 7,500 mm Width: 8,100 mm Height: 2,400 mm Weight: 16,000 kg Operating voltage: 400 V / 50 Hz Connected load: 76 kVA Compressed air connection: 7 ± 1 bar Laser gas consumption CO2 / N2 / He: 1 / 6 / 13 l/h

Year of construction: 2001, Operating hours: 98,000 h, Condition: like new (used), Functionality: limited functionality, TECHNICAL DETAILS working area: 2585 x 1280 mm Control: Siemens Sinumerik 840 D laser power: 3200 Watt (TLF trubo) sheet thickness mild steel: max. 8 mm sheet thickness stainless steel: max. 8 mm sheet thickness aluminum: max. 4 mm Workpiece weight: max. 200 kg Accuracy: +/- 0.1 mm Punching force: 22 t punching diameter: max. 76,2 mm C-axis punching: 330 rpm stroke sequence: 450 - 1000 1/min Bubv0Rrm7 stroke sequence marking: 2800 1/min MACHINE DETAILS length: 7500 mm width: 8100 mm height: 2400 mm weight: 16000 kg (basic machine) Operating voltage: 400 V / 50 Hz Connected load: 76 kVA Compressed air connection: 7+-1 bar

Condition: excellent (used), Year of construction: 2001, Operating hours: 39,500 h, Functionality: fully functional, Laser power: 4,000 W, Sheet thickness aluminum (max.): 10 mm, Sheet thickness steel (max.): 20 mm, Travel distance X-axis: 3,000 mm, Travel distance Y-axis: 1,500 mm, Travel distance Z-axis: 115 mm, TRUMPF Trumatic L 3030 - 4 kw - Year 2001 TECHNICAL DATA: Make: TRUMPF Type: L 3030 - 4 kw Year of manufacture: 2001 Working area: 3,000 x 1,500 x 115 mm Control: Siemens Sinumerik 840 D Laser power: 4,000 watts Max. Sheet thickness mild steel: 20 mm Max. Sheet thickness stainless steel: 15 mm Max. Sheet thickness aluminum: 10 mm Ueovtgbxwj Operating hours: NC one 39,500 h (10.08.2024) Machine regularly serviced by TRUMPF! STANDARD EQUIPMENT: - Closed machine frame with integrated laser unit Laser unit: TLF 2000 high-frequency excited CO2 laser, maintenance-free turboradial blower, mirror telescope, cooling unit, logbook function - Automatic pallet changer - Longitudinal conveyor belt for small parts/waste - Drives: maintenance-free three-phase servomotors - Cutting head quick-change device - Laser cutting head with 5" lens and laser cutting head with 7.5" lens - Programmable cutting gas pressure setting - DIAS 3 height control and process control - AutoLas Plus automatic focus position adjustment - Laser power control - Position laser diode - HI-LAS high-pressure cutting - Fast processing with SprintLas - ContourLas for the production of small holes - PMS plasma sensor technology - Automatic sheet edge detection - Programmable power cycles - Microweld - Automatic switch-off - Work area lighting - Sinumerik 840D control system: open control system on PC basis, simple operation, online help, diagnostic functions, maintenance logbook, technology data, teleservice - Safety: multi-beam light barriers, beam guidance fully encapsulated and ventilated, monitoring system, multi-chamber extraction and compact dust extractor, protective cabin - 3.5" floppy disk drive - TFT color screen - Electrical equipment: Voltage 400 V / 50 Hz - Paint finish: Standard RAL 9002/5010 EXTENDED EQUIPMENT: - TLF 4000 laser incl. lens monitoring sensors

Condition: ready for operation (used), Year of construction: 1998, Functionality: fully functional, Punching force: 22 t, Laser power: 1,800 W, Sheet thickness (max.): 8 mm, Travel distance X-axis: 2,585 mm, Travel distance Y-axis: 1,280 mm, With comprehensive equipment: TrumaTool, Grip and scissor lift table TECHNICAL DETAILS Punching work area: 2,585 x 1,650 mm Laser working area: 3,085 x 1,740 mm Combined working area: 3,085 x 1,650 mm Control system: Siemens Sinumerik 840 D Punching sheet thickness: 8 mm Sheet thickness aluminum / stainless steel / mild steel: 3 / 4 / 8 mm Punching force: 220 kN Part size: 500 x 500 mm Punching diameter: 76 mm Workpiece weight: max. 230 kg Stroke rate: 600 1/min Tool places: 18 pieces with 3 clamps Positioning speed X / Y / simultaneous: 90 / 60 / 108 m/min C-axis: 1 rpm C-axis thread forming: 3 rpm MACHINE DETAILS Mains voltage: 400 V Laser power: 1800 W Gpayy0 Dimensions: 8,700 x 7,800 x 2,400 mm Machine weight: approx. 23,000 kg Connected load: 62 kVA

Condition: excellent (used), Year of construction: 2010, Operating hours: 44,973 h, Functionality: fully functional, Punching force: 22 t, Laser power: 2,700 W, Sheet thickness (max.): 8 mm, Travel distance X-axis: 2,585 mm, Travel distance Y-axis: 1,280 mm, AUTOMATION - SheetMaster - GripMaster - TrumaSort R4 ADDITIONAL EQUIPMENT - Laser TruFlow 2700 - MultiTool function - Thread forming function - Marking/quick beading function - MultiBend function - Rolling technology function - Repositioning cylinder - Camber detection - Chip conveyor TECHNICAL DETAILS Punching work area: 2,585 x 1,280 mm Laser working area: 3,085 x 1,370 mm Combined working area: 3,085 x 1,280 mm Control system: Siemens Sinumerik 840 D Laser power: 140 - 2,700 watts Wavelength: 10.6 µm Sheet thickness: 8 mm Workpiece weight: max. 200 kg Punching force: 220 kN Active blank holder: 4.5 - 20 kN Linear magazine: 21 tools Programmable slide: 500 x 500 mm Positioning speed X / Y / simultaneous: 90 / 60 / 108 m/min C-axis punching: 60 rpm C-axis thread forming: 180 rpm Beiwjku Punching stroke sequence: 900 1/min Stroke sequence marking: 2800 1/min Position deviation: ± 0.10 mm Position spread: ± 0.03 mm MACHINE DETAILS Length: approx. 7.5 m Width: approx. 8.1 m Height: 2.4 m Weight: 16 tons Laser switch-on time: 29,826 h Cutting time: 6,054 h Machine switch-on time: 44,973 h Compressed air connection: 7 ± 1 bar Laser gas consumption CO2 / N2 / He: 1 / 6 / 13 l/h EQUIPMENT - Sturdy, easily accessible C-frame - Drives with maintenance-free three-phase motors - Programmable hold-down device for repositioning - Sensor-monitored 500x500 mm dividing chutes for punching and laser station, ejection cylinder on laser chute - Laser unit: High-frequency excited CO2 laser TLF 2700W, vibration-insulated - HI-Las high-pressure cutting - Fast processing with SprintLas - ContourLas for the production of small holes - Cutting gas pressure setting programmable - Laser cutting head: 5'' lens, quick-change device, distance control - Multi-beam light barriers, quick shut-off hydraulics, suction and compact dust extractor, protective device against scattered radiation on the cutting head

Condition: ready for operation (used), Year of construction: 2011, Operating hours: 64,300 h, Functionality: fully functional, MACHINE DETAILS Workshop overhauled, New maintenance Laser power: 2700 W X-travel: 2585 mm Y-travel: 1280 mm NC: 64300 h Laser ON: 59693 h Beam time: 21394 h EQUIPMENT - Sturdy C-frame - Coordinate guide with integrated linear magazine, 21 places for tools and clamping claws - 2 x clamping claws - Drives: Maintenance-free three-phase servomotors - Programmable hold-down device for repositioning - Sensor-monitored parts chutes 500 x 500 mm for punching and laser station, ejection cylinder on laser chute - Laser unit: TLF 2000 high-frequency excited CO2 laser, vibration-insulated, integrated in machine frame, incl. cooling unit and DIAS 3 laser controller - HI-LAS high-pressure cutting - Fast processing with SprintLas - ContourLas for producing small holes - Programmable cutting gas pressure setting - Laser cutting head: 5" lens, quick-change device, APC distance control - Lens monitoring sensor system - Additional cutting head with 7.5" lens Dpbbgl - Punching head: hydr. mono tool holder, 360° rotation for all tools, automatic tool length compensation, tool spray lubrication, 2 x lubricant containers, punching slug extraction, chip bucket - Sinumerik 840D control system, 10.4" TFT color screen, online help, diagnostic function, 3.5" floppy disk drive, RJ45 network connection - Safety: multi-beam light barriers, quick shutdown hydraulics, extraction and compact dust protection device against stray radiation on the cutting head - TLF 2700 laser incl. 7.5" cutting head for stainless steel - AutoLas Plus - MultiTool function - Thread forming function - Marking/quick beading function - 1 x additional clamping claw - Blow-out device for small parts - BNC network connection instead of RJ45 connection

Condition: good (used), Year of construction: 2004, X max. working range: 3085 mm Y Working range max.: 1740 mm Control: Siemens Sinumerik 840 D Laser power: 3200 watts Laser beam on: 11269 hours Operating hours: 94268 hrs. Standard equipment: - Sturdy C frame - Coordinate guide with integrated linear magazine, 21 places for tools and clamping claws - Drives: Maintenance-free three-phase servomotors - Programmable hold-down device for repositioning - Sensor-monitored parts chutes 500x500mm for punching and laser station, ejection cylinder on laser chute - 2 good parts boxes - Laser unit: High-frequency excited CO2 laser TLF 2000, vibration-insulated, integrated in machine frame, incl. cooling unit and DIAS 3 laser controller - HI-Las high-pressure cutting - Fast processing with SprintLas Dpptf7 - ContourLas for producing small holes - Cutting gas pressure setting programmable - Laser cutting head: 5'' lens, quick-change device, APC distance control - Lens monitoring sensor system - Additional cutting head with 7.5'' lens - Punching head: Hydraulic mono tool holder, 360° rotation for all tools, automatic tool length compensation, tool spray lubrication, 2nd lubricant container, punching slug extraction, chip bucket - Sinumerik 840D control system, TFT color screen 10.4'', simple operation, online help, diagnostic functions, maintenance logbook, technology data, order tables, Teleserice, 3.5'' floppy disk drive, RJ45 network connection Safety: Multi-beam light barriers, quick shut-off hydraulics, suction and compact dust extractor, protective device against stray radiation on the cutting head + TLF 3200 laser + Thread forming function + MultiTool function + Signing / fast beading function + MultiBend function + Rolling technology function + Additional clamping claw + Repositioning cylinder + Individually opening claws + Tank heating + Bulge detection + Chip conveyor automation + Sheetmaster + Gripmaster + Trumasort R4

Condition: reconditioned (used), Year of construction: 2005, Operating hours: 41,380 h, Functionality: fully functional, Laser power: 6 W, Trumpf Trumatic TC L 4050 6 KW Co2 4000x2000 mm year of construction 2005 41248 hours open beam flap Ulpd9Bqt The machine has undergone all Trumpf maintenance cycles

Condition: used, Year of construction: 2006, Operating hours: 55,000 h, Working range: 15,004,000 mm, Laser power: 2,700 W, Combination Laser machine Trumpf Trumatic 6000-1600 - 1500 mm. X 4000 mm. - year 2006 - TruFlow 2700 - automatic loading and unloading 4000 mm. - total Hours 55000 Rgteh

Year of construction: 2007, Condition: ready for operation (used), Laser type: TruFlow 2700, punching force: 220kN, laser power: 2700W, max. sheet thickness: 8mm, working range X/Y: 2585mm/1280mm, speed X/Y/simultaneous: 90/60/108m/min, max. workpiece height punching/laser: 35mm/22mm. Dimensions X/Y/Z: 7500mm/8100mm/2400mm, weight: approx. 16000kg, operating hours: 73431h (12.06.2024). Including TrumaGrip GripMaster with pneumatic scissor lift table (400mm), TrumaLift SheetMaster 1305 with 4 movable tables, TrumaTool ToolMaster with 40 stations and chip conveyor. Resonator transmitter tube renewed (2022), diaphragm vacuum pump renewed (2023) and leak test carried out (2024). Documentation available. On-site inspection is possible. E2Ovqaq

Condition: good (used), Year of construction: 2002, Operating hours: 10,255 h, Functionality: fully functional, Large-format laser punch press including SheetMaster + TrumaGrip (3000 x 1500 mm) and TrumaSort (4 containers) Bids must be submitted for collection by the deadline of 23.02.2024 AUTOMATION - SheetMaster: not only loads and unloads your machine, but also reliably sorts your parts - TrumaSort: automatically sorts small parts into up to four boxes - unattended during production - TrumaGrip: ensures convenient scrap skeleton handling. It automatically removes scrap skeletons and scrap strips and stacks them on a scissor lift table without any operator intervention TECHNICAL DETAILS X Working range laser/punching: max. 3085 mm Y Working range laser/punching: max. 1550 mm X Combined working range: max. 2500 mm Y Working range combined: max. 1550 mm Sheet thickness steel / aluminum / stainless steel: 8 / 4 / 6 mm Workpiece weight: 230 kg Punching force: 180 kN Punching stroke sequence: 917 1/min Marking stroke sequence: 2800 1/min Control: Siemens Sinumerik 840 D Laser: TLF 2700 Laser power: 2700 watts MACHINE DETAILS Dimensions: approx. 8.4 x 8.5 x 2.2 m Laser beam on: 10255 hours Operating hours: 62331 hrs. EQUIPMENT (additional) + 17 used set-up cassettes incl. die plate + Repositioning cylinder + Thread forming function + Marking/quick beading function + Slotting function + Roller technology function + Chip conveyor belt with tilting container + Sheet height monitoring + Rotoscanner EQUIPMENT (standard) - Hi-Las high-pressure cutting - Laser cutting head with 5'' lens - Laser cutting head with 7.5'' lens - Cutting head quick-change device - progr. cutting gas selection/pressure setting - Capacitive height control (DIAS III) - Function: ContourLas - slag cone detection - Compact dust extractor - Automatic tool changer with 18 stations (21 clamping claws) - 3 clamping claws - Rotation of all tools - NC-controlled digital maintenance-free three-phase drives - Automatic repositioning - Tool length compensation - Quick shutdown of the hydraulics - Automatic switch-off - Automatic parts chutes 500 x 500 mm each - Sensors for both part chutes - Punching slug extraction - Forming option - Programmable punching tool lubrication - Programmable blank holder - Adaptive stroke length control - safety devices Bkmkpqg7You - RJ 45 network connection - 3.5'' floppy disk drive 3 standard trucks are required for collection | Machine is under power until 19.02.2024

Condition: ready for operation (used), Year of construction: 2007, Operating hours: 50,115 h, Functionality: fully functional, MACHINE DETAILS Wstonuc88 Laser power: 2700 W X-travel: 2585 mm Y-travel: 1280 mm NC: 50115 h Laser ON: 49819 h Beam time: 12287 h EQUIPMENT - Sturdy C-frame - Coordinate guide with integrated linear magazine, 21 places for tools and clamping claws - 2 x clamping claws - Drives: Maintenance-free three-phase servomotors - Programmable hold-down device for repositioning - Sensor-monitored parts chutes 500 x 500 mm for punching and laser station, ejection cylinder on laser chute - Laser unit: TLF 2000 high-frequency excited CO2 laser, vibration-insulated, integrated in machine frame, incl. cooling unit and DIAS 3 laser controller - HI-LAS high-pressure cutting - Fast processing with SprintLas - ContourLas for producing small holes - Programmable cutting gas pressure setting - Laser cutting head: 5" lens, quick-change device, APC distance control - Lens monitoring sensor system - Additional cutting head with 7.5" lens - Punching head: hydr. mono tool holder, 360° rotation for all tools, automatic tool length compensation, tool spray lubrication, 2 x lubricant containers, punching slug extraction, chip bucket - Sinumerik 840D control system, 10.4" TFT color screen, online help, diagnostic function, 3.5" floppy disk drive, RJ45 network connection - Safety: multi-beam light barriers, quick shutdown hydraulics, extraction and compact dust protection device against stray radiation on the cutting head - TLF 2700 laser incl. 7.5" cutting head for stainless steel - AutoLas Plus - MultiTool function - Thread forming function - Marking/quick beading function - Rolling technology function - Softpunch function - 2 x additional clamping claw - Blow-out device for small parts - BNC network connection instead of RJ45 connection

Condition: good (used), Year of construction: 2014, Functionality: fully functional, Laser power: 3,000 W, X Working range max.: 2500 mm Y Working range max.: 1250 mm Control system: IndraMotion MTX Laser power: 3000 watts Standard equipment: Machine - Coordinate guidance for high-precision processing - Sturdy, easily accessible C-frame - Linear magazine with 21 tool positions and 4 clamping claws - Drives with maintenance-free three-phase servo motors - Repositioning device with programmable hold-down device - Foot switch for closing clamps - Ball tables - 2 parts flaps 500 mm x 500 mm - FocusLine - NitroLine - FastLine - Ejection cylinder Laser parts - Slag cone detection TRUMPF Laser - TruDisk 3001 solid-state laser with 1 LLK output - Excitation via pump diodes - LLK according to standard layout (10m) - Laser control TruControl 1000 - Cooling unit - Laser logbook function Cutting head - Solid-state laser compact cutting unit - ControlLine Punching head - Electro-hydraulic punching head - Rotatable mono tool holder - Tool length compensation - Programmable hold-down device (active / passive / repositioning) - Punch stroke counter and thread stroke counter - Punch spray lubrication - Punch slug extraction - Calculation of fill level in the punching console - Level monitoring Thread forming and tool lubrication Control system Csee2Wohls - Open control system based on Rexroth IndraMotion MTX - Control panel with 17" touch control panel - Program management - Production plan - Integrated technology data - Teleservice via Internet - Programmable cutting gas pressure - Automatic switch-off with wake-up mode Data transmission - USB interface - RJ-45 network connection Safety and security - CE marking - Dual-beam light barriers - Monitoring system for gas pressure, temperature, cooling water, etc. - Quick hydraulic shutdown - Protection against stray radiation - Compact dust extraction system - MultiTool function - MultiBend function - Thread forming function - Engraving function - Deburring and rolling technology function - SoftPunch function - StripLine - Lowerable die - Spray lubrication die incl. fill level monitoring -Additional clamping claw 4 pcs. height-adjustable clamping claws - Vibration-damped installation -Chip conveyor with tilting container - Blow-out device for small parts -Camber detection SheetMaster - Unloading platform - Suction frame with 36 suction cups - Peeling suction cups - Vacuum sensors for each suction cup - Double sheet detector for double sheet control - Central lubrication - TRUMPF control system based on Rexroth IndraMotion MTX - Automatic clamp closing machine - Parallel loading and unloading during machining time - Peeling system incl. positioning aid Medium format (2500x1250) - First additional suction cup package standard - Second additional suction cup package standard - Unloading monitoring Laser parts GripMaster - Parts conveyor belt punching station -Parts conveyor belt Laser station ToolMaster with 70 stations (only for punching operation) - ToolMaster main time parallel set-up

Year of construction: 2006, Operating hours: 24,302 h, Condition: good (used), Machine/vehicle number: A0230A1535, Długość stołu 3000 mm Szerokość stołu 1500 mm Głowice palników 1 Sterowanie Siemens Sinumerik 840 D Grubość blachy St. maks.: 25 mm Grubość blachy Va. Maks.: 20 mm Grubość blachy Al. Maks.: 15 mm Moc lasera: 5000 Watt Czas pracy: 98503 godzin (stan na 12.22) Włączona wiązka laserowa: 24302 godzin (stan na 12.22) Wyposażenie standardowe: - Zamknięta rama maszyny ze zintegrowanym zespołem laserowym - Automatyczny zmieniacz palet - Wzdłużny przenośnik taśmowy dla małych części i odpadów - Napędy: napęd bramowy w połączeniu z liniowymi napędami bezpośrednimi - Urządzenie do szybkiej wymiany głowicy tnącej - Laserowa głowica tnąca z obiektywem 9,8'' - progr. wybór gazu tnącego/regulacja ciśnienia - Pojemnościowa kontrola wysokości i procesu (ControlLine) Hjxbsikfq - sterowanie mocą lasera - Dioda laserowa pozycjonująca - Cięcie wysokociśnieniowe Hi-Las (NitroLine) - SprintLas (FastLine) - ContourLas (ContourLine) - Technologia czujników plazmowych PMS (PlasmaLine) - Monitoring obiektywu (LensLine) - automatyczne wykrywanie krawędzi zewnętrznej arkusza - Microweld - Automatyczne czyszczenie dysz - Urządzenie do rozpylania oleju - Oświetlenie miejsca pracy - Automatyczne wyłączanie - Urządzenia zabezpieczające (bariery świetlne wielopromieniowe, wiązki obudowane prowadzenie belki) - Odciąg wielokomorowy - Odkurzacz kompaktowy - ToPs 100 lite -Połączenie sieciowe RJ 45 - Stacja dyskietek 3,5'' - Kolorowy ekran TFT - szczegółowa instrukcja obsługi akcesoria transportowe: - zamki transportowe - elementy zawieszenia Maszyna pracuje na naszej produkcji, jest pod napięciem i można ją obejrzeć. Na bieżąco serwisowana wraz z wymienianymi na bieżąco podzespołami. Faktury zakupu i wymiany podzespołów do wglądu. Oferowany ex works (bez montażu) Maszyna dostępna od 1 marca 2023 do demontażu.

Condition: excellent (used), Operating hours: 58,000 h, Functionality: fully functional, Laser power: 5,000 W, TRUMPF Trumatic L 3050 - 5 kw TECHNICAL DATA: Make TRUMPF Type Trumatic L 3050 - 5 kw Year of manufacture 2005 Working area 3,000 x 1500 x 115 mm Control Siemens Sinumerik 840 D Laser power 5,000 watts Max. Sheet thickness Mild steel 25 mm Max. Sheet thickness stainless steel 20 mm Max. Sheet thickness aluminum 12 mm Operating hours approx. 58,000 h STANDARD EQUIPMENT: - Closed machine frame with integrated laser unit - Laser unit: TLF 5000 CO2 laser, high-frequency excited, cooling unit, logbook function - Automatic pallet changer - Longitudinal conveyor belt for small parts/waste - Drives: Gantry drive in combination with linear direct drives - Laser power control - HI-LAS high-pressure cutting - Plasma sensor system PMS - Fast processing with SprintLas - ContourLas for the production of small holes - Programmable power cycles - Microweld - Programmable cutting gas pressure setting Ebq2Vwo0Z - Laser cutting head with 5" lens and laser cutting head with 7.5" lens - Quick-change cutting head device - Automatic sheet outer edge detection - Capacitive height control (DIAS) - Process Control System (PCS) - Position laser diode - Automatic focus position adjustment AutoLas Plus - Automatic switch-off - Work area lighting - SIN 840D control system: Open control system on PC basis, simple operation, online help, diagnostic functions, maintenance logbook, technology data, teleservice - Workshop programming ToPs 100 lite - Safety: Multi-beam light barriers, beam guidance fully encapsulated and ventilated with nitrogen ventilated, monitoring system, multi-chamber extraction system and compact dust extractor, safety cabin - Network connection: BNC/RJ-45 network connection - Electrical equipment for three-phase current 400 V / 50 Hz - Paintwork: textured paint white RAL 9002 / gentian blue RAL 5010 EXTENDED EQUIPMENT: - Additional laser cutting head with 9-inch lens - NEW transmitter tubes on delivery

Condition: used, Year of construction: 2004, Functionality: fully functional, TECHNICAL DETAILS Table length: 3000 mm Table width: 1500 mm Torch heads: 1 z-axis: 115 mm Laser power: 6000 watts sheet thickness: max. 25 mm max. workpiece weight: 900 kg Bjq3Plx2V2E Accuracy: Smallest programmable path dimension: 0.001 mm Position deviation: 0.05 mm Average position spread: 0.03 mm Max. Axis speeds: Axis parallel 200 m/min; simultaneous approx. 300 m/min Max. Axis acceleration: 17 m/s2 MACHINE DETAILS Space requirement: approx. 11.3 x 4.6 x 2.4 m Machine weight: approx. 12.5 t EQUIPMENT - Laser type: TLF 6000 TM - Siemens 840 D control system - Liftmaster - with Trumalift, but without sheet magazine - 3 cutting heads 10"/7.5"/5" - Documentation

Year of construction: 2005, Condition: excellent (used), Functionality: fully functional, Laser cutting machine TRUMATIC L6030 with laser TLF 4000W TECHNICAL DETAILS Siemens: Sinumerik 840 D control with 500 MB memory working area X x Y: 6000 x 2000 mm Laser TLF 4000 incl. control sensor for lens; HiLas Plus; laser beam sealing with nitrogen Control: PCS (Process Control System) Tube cutting: Jig incl. jaws type 1 (4 internal + 4 external), three-jaw chuck for tube cutting, jaws type 7 +8 Automation: device for loading position Iuksrigyop EQUIPMENT High pressure cutting HI LAS Cutting head with 5" lens Cutting head with 7,5" lens Quick change of cutting heads APC height control Diode laser for programming the laser cutting head programmable cutting gas selection programmable power cycle Plasma Sensor (PMS) SprintLas ContourLas Microweld AutoLas Plus Laser force control Oil mist Log book function laser automatic pallet changer work area lighting conveyor belt for small parts/waste exhaust system compact dust collector TFT color screen Automatic power off function toPs 100 lite Mains connection RJ45 Teleservice connection

Year of construction: 2001, Condition: good (used), Functionality: fully functional, TECHNICAL DETAILS travel range X x Y x Z: 3000 x 1500 x 115 mm workpiece weight: 710 kg accuracy: 0,1 mm Laser: TLF4000 rapid traverse single: 60 m/min rapid traverse simultaneous: 85 m/min Control: Siemens Sinumerik 840D LASER DETAILS Power: 4000 W Sheet thickness aluminum: 10 mm Stainless steel: 15 mm steel: 20 mm Laser gas CO2: 1 l/h N2: 6 l/h He: 13l/h Cutting gas O2: 500 - 2000 l/h MACHINE DETAILS machine dimensions: 9300 x 4600 x 2000 mm B7Yg2Ulh weight approx.: 12000 kg

Condition: reconditioned (used), Year of construction: 2006, Operating hours: 57,752 h, Functionality: fully functional, SPECIAL ACCESSORIES: + Multitool function + Thread forming function + Repositioning device + Vibration-damped installation + AutoLas Plus STANDARD EQUIPMENT: - X working range in combined operation 2585mm - Hi-Las high-pressure cutting - Laser cutting head with 5'' lens - Laser cutting head with 7.5'' lens - Cutting head quick-change device - progr. cutting gas selection/pressure adjustment - capacitive height control Dias III - Function: ContourLas - slag cone detection - Compact dust extractor - Automatic tool changer with 18 stations (21 clamping claws) - 3 clamping claws, - Rotation of all tools - NC-controlled digital maintenance-free three-phase drives, - Automatic repositioning, - tool length compensation, - Quick shutdown of the hydraulics - Automatic switch-off - Automatic parts chutes 500 x 500 mm each - Sensors for both part chutes - 2 good part boxes - Punching slug extraction - Forming option, - Programmable punching tool lubrication - Programmable blank holder - Adaptive stroke length control - safety devices - telediagnostic device - RJ 45 network connection - 3.5'' floppy disk drive Dpg83V - Detailed operating instructions

Year of construction: 2005, Operating hours: 42,125 h, Condition: good (used), Functionality: fully functional, Bid submission commits to pickup in week 39 - 09/25/2023 - 09/29/2013. with LoadMaster - automatic pallet changer with longitudinal conveyor belt for small parts / waste. LASER CONTROL - HI-LAS high pressure cutting - laser cutting head with 9" lens - laser cutting head with 7,5" lens - laser cutting head with 5" lens - Cutting head quick change device - Automatic sheet outer edge detection - APC capacitive height control - Position laser diode - Programmable cutting gas selection / pressure setting - Programmable power cycles - Microweld - Automatic nozzle cleaning - PMS plasma sensor system - SprintLas in all sheet thicknesses - ContourLas - AutoLas Plus - Spraying equipment - PCS Process Control System TECHNICAL DETAILS working area: 3000 x 1500 x 115 mm laser power: 5000 Watt control: Siemens Sinumerik 840 D Max. sheet thickness/pc: 25 mm Max. Sheet thickness/VA: 20 mm Max. sheet thickness Sheet thickness/Al: 12 mm Max. Speeds: 200/300 m/min Accuracy: 0,1 mm Laser unit: CO2 laser 5000 Watt Drives: Gantry drive in combination with linear direct drives MACHINE DETAILS Dkrwsd2Y length: 11000 mm width: 4600 mm height: 2400 mm weight: 12000 kg Operating hours Switch-on time: 89.311 h Laser switch-on time: 87.202 h Cutting time: 42.125 h EQUIPMENT - Closed machine frame with integrated laser unit - Laser high-frequency excited, cooling unit, logbook function - Work area lighting - automatic switch-off - Open control based on PC, easy operation, online help, diagnostic functions, maintenance logbook, technological data, TFT color screen, RJ network connection, - 3.5" floppy disk drive - Workshop programming ToPs 100 lite - Safety: multi-beam light barriers, beam guidance fully enclosed and ventilated, monitoring system, multi-chamber exhaust and compact dust extractor, protective cabin