Used Trumf Trulaser for sale (112)

Condition: excellent (used), functionality: fully functional, Year of construction: 2023, Operating hours: approx. 3,000 h Crodpfsy Nl U Sjx Aiiji

Condition: excellent (used), functionality: fully functional, Year of construction: 2012, Operating hours: 28,000 h Cedpey Rnb Dofx Aiieri

Condition: excellent (used), functionality: fully functional, Year of construction: 2014, Operating hours: approx. 22,800 h Csdpfjyyygkox Aiiori Laser on: approx. 40,100 h Voltage: 400 V Frequency: 50 Hz Power: 3,200 W

Condition: excellent (used), functionality: fully functional, Year of construction: 2010, Available starting September/October. Cjdozn N Hgepfx Aiiori Operating hours: Laser: 35,000 hours.

Condition: used, Year of construction: 2005, pressure 300 t chamfer lenght 4550 mm distance between columns 4050 mm control CYBELEC DNC 1200 PS Crodpfx Aioz Icy Deioi total power requirement 33 kW weight of the machine ca. 25.500 kg

Condition: like new (used), functionality: fully functional, Year of construction: 2020, operating hours: 3,956 h, machine/vehicle number: A1440D0207, controller model: Sinumerik 840D SL, laser type: diode laser, laser source manufacturer: Trumpf, laser source model: TruDisk 2001 solid-state laser, laser hours: 3,432 h, laser power: 2,000 W, sheet thickness (max.): 8 mm, pipe diameter (max.): 152 mm, travel distance X-axis: 6,500 mm, feed rate X-axis: 170 m/min, workpiece weight (max.): 130 kg, input voltage: 400 V, input frequency: 50 Hz, type of input current: three-phase, overall weight: 17,000 kg, total length: 16,000 mm, total width: 7,000 mm, total height: 2,800 mm, tube wall thickness (max.): 8 mm, Equipment: CE marking, centralized greasing system, cooling unit, documentation/manual, dust extraction, emergency stop, fume extraction, nozzle changer, safety light barrier, Manufacturer | TRUMPF Model | TruLaser Tube 5000 fiber (T06) Machine number | A1440D0207 Year of manufacture | 01-2020 Laser power | 2,000 W / 2 kW Laser source | TruDisk 2001 solid-state laser, single laser output Raw material length | 6,500 mm Finished part length | 4,500 mm Maximum LoadMaster bundle weight | 4,000 kg Control | TRUMPF control system based on Sinumerik 840D SL Operator panel | Pivoting panel with 19-inch touchscreen Cutting head | Lens cutting head with 150 mm focal length Electrical supply | 400 V / 50 Hz; IEC electrical standard Bevel cutting | Not fitted Factory options Extended finished-part handling — 4.5 m The standard 3 m finished-part configuration is extended by 1.5 m, including an additional finished-part support. RapidCut Dynamic additional axis for increased acceleration during cutting movements. SeamLine Tube Weld seam detection on the outside of the tube. LoadMaster Tube with automatic setup Automatic loading system for 6.5 m raw material, with a bundle loading area rated for a maximum bundle weight of 4,000 kg. Automatic setting of compartment height and compartment width. Adaptive clamping systems Feed station equipped with additional clamping elements for L profiles, U profiles, and flat material. Feed-through chuck equipped with special clamping rollers for these material types. Brass and copper cutting packages Brass cutting package with nitrogen cutting data. Copper cutting package with oxygen cutting data. These packages do not include bevel cutting data. Machine construction and material handling Feed station with self-centering clamping jaws and a feed-through chuck with self-centering tensioning rollers. Raw-material support with automatically retractable tube supports, and finished-part support with extendable guide rollers. High-precision drives and work-area illumination. Parts deposit with one conveyor table and conveyor-table extension. Part-removal station with scrap conveyor belt and collection container. Laser and process control TruDisk 2001 solid-state laser. ControlLine, FocusLine, and NitroLine functions. Integrated technology data, programmable cutting-gas pressure, automatic switch-on and shutdown, and Condition Guide. Remote support interface, USB interface, RJ45 network interface, Central Link, and Online Update Manager. Availability of connected services is not represented as an included subscription. Factory-specified tooling Clamping-jaw pair up to Ø152 mm and round-tube form supports up to Ø152 mm. Rectangular-tube form supports described in the factory specification as “up to 29 mm, 36 mm, 43 mm, 85 mm, and 170 mm outer circle,” plus guide rollers for round and rectangular tubes. Cedpfx Aoz Ii A Soiieri Software and documentation Original factory software package: - TruTops Tube including 3D tube construction. - 3D tube interface. - Positioning aids. - Bend connection. - TruTops Monitor complete package. Condition Condition: Excellent used condition; in perfect working order. Machine operating hours: [3956] Laser hours: [3432] Machine location: [Gabrovo, Bulgaria] Availability: [Immediate] Inspection / cutting demonstration: [Immediate] Dismantling, loading, transport, and recommissioning: Scope and costs to be agreed separately. We will provide full support for loading and arranging the transportation.

Condition: good (used), functionality: fully functional, Year of construction: 2019, operating hours: 25,995 h, control type: CNC control, degree of automation: automatic, controller manufacturer: Siemens, controller model: SINUMERIK 840D SL, laser type: diode laser, laser source manufacturer: TRUMPF, laser hours: 14,600 h, laser power: 4,000 W, sheet thickness steel (max.): 20 mm, sheet thickness stainless steel (max.): 25 mm, sheet thickness aluminum (max.): 20 mm, sheet thickness brass (max.): 8 mm, sheet thickness copper (max.): 8 mm, travel distance X-axis: 3,000 mm, travel distance Y-axis: 1,500 mm, travel distance Z-axis: 115 mm, feed rate X-axis: 100 m/min, feed rate Y-axis: 100 m/min, feed rate Z-axis: 100 m/min, workpiece weight (max.): 900 kg, input current: 42 A, type of cooling: water, year of last overhaul: 2026, Equipment: CE marking, centralized greasing system, cooling unit, documentation/manual, dust extraction, emergency stop, fume extraction, nozzle changer, safety light barrier, Special equipment: + LiftMaster Compact 1530 (Type AL34) with loading cart + 3001 on TruDisk 4001 + BrightLine fiber + Nozzle changer + Wireless Operation Point + Performance package for fusion cutting + High-speed cutting package + High-speed eco cutting package + Copper cutting package + Brass cutting package + Transverse conveyor with tilting hopper + Storage interface + LiftMaster Compact 1530 (Type AL34 with loading cart) + Auxiliary pallet operation with loading cart + Safety fence Optional, at an extra cost: 1. Assembly, commissioning, partial overhaul and training of up to 3 operators at the customer's site, with a functional guarantee upon acceptance. 2. Workshop overhaul of the machine with commissioning and acceptance according to manufacturer's specifications in our workshop. Assembly, commissioning of the machine, and training of up to 3 operators at the customer's site. Standard equipment: - Closed machine frame - Automatic pallet changer in the longitudinal direction - Torque drive in combination with linear direct drives - Closed beam guidance via fiber optic cable - Machine cooling unit (water-air) - Integrated control cabinets with internal lighting - Longitudinal conveyor - Work area lighting - Positioning laser diode - Spraying device - PierceLine - FocusLine - NitroLine - PlasmaLine - Automatic nozzle cleaning - Transport and assembly device TRUMPF Laser - Solid-state laser TruDisk with 1 fiber optic output - Laser cooling unit (water-air) - Excitation via pump diodes - Laser power control Cutting unit - Universal cutting unit - Single cutting head strategy - Protective glass against lens contamination - ControlLine: Height control and sheet edge detection Control system - Workshop programming (TruTops via network access) - Quick reproduction - Touch color screen - Integrated technology data - Automatic shutdown - Programmable cutting gas/pressure selection - ContourLine - Microweld - FastLine - FlyLine - AdjustLine Crsdpfx Aio Ahhu Ueiei - Teleservice via internet Data transfer - USB interface - RJ-45 network connection Safety - CE marking - Light barriers - Multi-chamber extraction system - Compact dust collector - Machine enclosure with certified viewing window (right door) - Roof cover

Condition: used, functionality: fully functional, Year of construction: 2014, operating hours: 38,000 h, control type: CNC control, laser type: fiber laser, laser source manufacturer: Trumpf, laser source model: L69, laser hours: 26,400 h, laser power: 5,000 W, sheet thickness (max.): 25 mm, sheet thickness steel (max.): 25 mm, sheet thickness stainless steel (max.): 25 mm, sheet thickness aluminum (max.): 20 mm, sheet thickness brass (max.): 20 mm, sheet thickness copper (max.): 20 mm, working length: 4,000 mm, working width: 2,000 mm, type of cooling: water, Equipment: CE marking, centralized greasing system, cooling unit, documentation/manual, dust extraction, emergency stop, fume extraction, nozzle changer, safety light barrier, For sale is a TRUMPF TruLaser 5040 Fiber L69, manufactured in 2014, equipped with a 5 kW TruDisk laser. The machine has a processing area of 4,000 × 2,000 mm and is currently powered on. An inspection with a functional demonstration is possible by arrangement. Technical specifications: Model: TruLaser 5040 Fiber L69 Year of manufacture: 2014 Laser source: TruDisk 5001, 5 kW Processing area: 4,000 × 2,000 mm Control system: Siemens Sinumerik 840D SL Equipment according to machine documentation: BrightLine Fiber and CoolLine Cutting packages for copper and brass ContourLine, FastLine, FlyLine, and AdjustLine Automatic nozzle cleaning Camera for process monitoring Electric retractable roof and multi-chamber extraction system Wireless Operation Point and teleservice Cjdez D U Niepfx Aiieri The machine is particularly suitable for companies that want to combine a large sheet metal format with the material flexibility of a fiber laser. Price: €90,000 (negotiable), net, ex works Leopoldshöhe. Inspection and further technical documentation available upon request. Disassembly, loading, and transport are to be arranged by the buyer and are not included in the price. Please include your company name and telephone number in your inquiry.

Condition: excellent (used), functionality: fully functional, Year of construction: 2008, Technical Data – TRUMPF TruLaser 3030 * Manufacturer: TRUMPF * Model: TruLaser 3030 * Machine Type: CNC Laser Cutting Machine * Machining Process: 2D Laser Cutting * Working Area: 3,000 × 1,500 mm * Z-axis: 115 mm * Maximum Workpiece Weight: approx. 900 kg * CNC Control: Siemens Sinumerik 840D * Laser Technology: CO₂ laser (in standard TruLaser 3030 versions) * Laser Power: depending on the version, for example 3,200 or 4,000 Watts Cutting Performance Depending on the laser power and equipment, the following material thicknesses are possible: At 3,200 Watts: * Mild steel up to 20 mm * Stainless steel up to 12 mm * Aluminum up to 8 mm At 4,000 Watts: * Mild steel up to 20 mm * Stainless steel up to 15 mm * Aluminum up to 10 mm The stated values correspond to typical manufacturer data for the respective version. The exact laser power and cutting capacity of the machine offered still need to be confirmed. Equipment and Functions * CNC-controlled laser cutting * Precise machining of steel, stainless steel and aluminum * Suitable for single parts as well as series production * Automated cutting process * Machining of complex contours and shapes * Enclosed machine area * Automatic material change via the existing handling system Including TRUMPF LiftMaster The offer also includes a TRUMPF LiftMaster, manufactured in 2008, for the automatic loading and unloading of the laser cutting machine. The LiftMaster handles the material and enables the automatic feeding and removal of sheet metal. LiftMaster Data: * Manufacturer: TRUMPF * Model: LiftMaster * Year of Manufacture: 2008 * Machine Number: A0220A2542 * Material Number: 1246094 * Serial Number: 692 Thanks to the additional automation system, the machine is particularly suitable for companies that want to optimize their sheet metal processing. Condition and Inspection Credo Ah Uraepfx Aiisi The machine is located in an industrial hall and is offered as a complete system. The optical condition can be seen in the attached pictures. An on-site inspection is possible after prior arrangement. Further technical information and pictures can be provided upon request. Dismantling, loading and transport will be arranged separately.

Condition: used, functionality: fully functional, Year of construction: 2018, operating hours: 31,621 h, machine/vehicle number: A0221E1033, table length: 3,000 mm, table width: 1,500 mm, Power: 3000 W Work area size: 3000x1500 mm Further details can be found in the images, and it comes with a commissioning guarantee. Codpfjzzyl Hox Aiieri

Condition: excellent (used), functionality: fully functional, Year of construction: 2016, operating hours: 61,015 h, machine/vehicle number: 1948094, laser type: fiber laser, laser hours: 37,534 h, power: 6,000 kW (8,157.72 HP), Used laser cutting machine with 6 kW fiber laser and LiftMaster Compact (Stopa version) Manufacturer: TRUMPF Model: TruLaser 5040 Fiber (L69) Year of manufacture: 2016 TECHNICAL DATA: Material thickness, max: Mild steel O2: 25 mm, Stainless steel N2: 40 mm, Aluminum N2: 25 mm, Copper O2: 10 mm, Copper N2: 5 mm, Brass N2: 10 mm Positioning deviation: 0.05 mm Maximum positioning scatter Ps max: 0.03 mm Working area: 4,000 x 2,000 mm Laser power: 6,000 watts Standard equipment Machine: Closed machine frame Torque drive in combination with linear direct drives Closed beam guidance via laser light cable (LLK) Machine cooling unit (water-air) Integrated control cabinets with interior lighting Automatic pallet changer in the longitudinal direction 19" touch color screen Longitudinal conveyor belt Power supply for TruDisk via the machine Work area lighting Positioning laser diode Spray device PierceLine FocusLine NitroLine PlasmaLine Automatic nozzle cleaning Copper cutting package (includes cutting data) Brass cutting package (includes cutting data) Transport and assembly device SPECIAL EQUIPMENT: Solid-state laser TruDisk 8001 with 1 LLK outlet Smart Nozzle Automation (includes nozzle changer, automatic nozzle condition monitoring, and smart skip) BrightLine fiber CoolLine (only in conjunction with BrightLine fiber) DetectLine: Precise sheet metal detection (incl. automatic focus measurement) Wide transverse conveyor belt with tilting container (container to the right of the machine) Cleaning brush Integrated camera (Full HD) for process monitoring and individual image transfer to the network (view of the first 2.5 m) Additional 10 m extension of the LLK between the laser and the machine Smart Collision Prevention (requires smart-collision-prevention plug-in in TruTops) Machine platform version (without steel structure) Connection to STOPA large storage systems (SKL or UL) Safety devices for storage connection incl. 2nd light barrier circuit Storage interface (without storage trolley) LiftMaster Compact (STOPA version) TRUMPF laser: Solid-state laser TruDisk 8001 with one LLK outlet Light guide cable according to standard layout Csdpfx Aozu Sqheiijri Laser cooling unit (water-air) Excitation via pump diodes Laser power control (The TruDisk laser is subject to international export control. According to EC Dual-Use Regulation 428/2009 (laser covered under 6A005)) Cutting head: Universal cutting unit with fully adaptive lens system Single-cutting-head strategy Protective glass against lens contamination Condition monitoring of the protective glass ControlLine: Height control and sheet metal outer edge detection Control system: SINUMERIK 840D SL control system Simple workshop programming TruTops Laser via network access Fast reproduction Integrated TRUMPF technology data Automatic shutdown Programmable cutting gas/pressure selection ContourLine FastLine FlyLine Microweld AdjustLine Teleservice via the Internet Data transfer: USB interface RJ-45 network connection Safety: CE marking Light barriers Multi-chamber extraction system Compact dust extraction system Machine cladding, certified viewing window, door on the right Electric roll-up roof This used machine can be inspected under production conditions. All information is without guarantee – sale is made excluding all guarantees and warranties. Subject to prior sale. Machine can also be inspected.

Condition: refurbished (used), functionality: fully functional, Year of construction: 2016, overall weight: 12,000 kg, Manufacturer: TRUMPF Type: TruLaser 5030 (L52) Year of manufacture: 2016 Working area: 3000x1500x115 Laser power: 6000 Watts Control system: Siemens Sinumerik 840 D Operating hours: 37010 / 21655 h Max. sheet thickness/steel: 25 mm Max. sheet thickness/stainless steel: 25 mm Max. sheet thickness/aluminum: 15 mm Max. speeds: 300 m/min Accuracy: +/- 0.1 mm Length: 11100 mm; Width: 4600 mm; Height: 2400 mm; Weight: 12000 kg Machine • Enclosed machine frame with integrated laser unit • Motion unit for highly precise machining • Enclosed beam guidance • Cooling unit • Automatic pallet changer • Single cutting head strategy • Longitudinal conveyor belt for small parts/scrap • Ergonomic control panel with touch color screen • Positioning laser diode • Work area lighting • Spray device • PierceLine • FocusLine • NitroLine • PlasmaLine • Automatic nozzle cleaning TRUMPF Laser • New generation CO2 laser TruFlow 6000, energy-efficient • Maintenance-free turbo radial fan • High-frequency excitation • Laser control system TASC • Laser power control • Laser logbook function Cutting head • Lens with RFID chip • Laser cutting head with 250 mm lens • Universal quick-change device (UTI) • ControlLine Control system • Simple workshop programming • Easy operation • Fast reproduction • Siemens Sinumerik 840 D SL • 19-inch touch color screen • Integrated technology data • Automatic shut-off • Production plan • Programmable cutting gas pressure • Multi-sheet layout Crodpfx Aj Ah Up Ujiioi • Microweld • FastLine • AdjustLine • FlyLine • Remote support interface • Condition Guide Data transfer • USB interface • RJ-45 network connection • Central Link • Online Update Manager Extended machine equipment • Smart Nozzle Automation - Nozzle changer - Beam alignment - LensLine with automatic condition monitoring - Nozzle inspection - Smart Skip • Brightline • Integrated camera 1 for monitoring the work area and transferring single images to the network (view of the first 2.5 m) • Drop&Cut (only in conjunction with Integrated Camera 1)

Condition: used, functionality: fully functional, Year of construction: 2017, operating hours: 8,000 h, machine/vehicle number: S1631C0399, control type: CNC control, degree of automation: automatic, actuation type: electric, controller manufacturer: TRUMPF, controller model: TruLaser Cell 8030, laser type: fiber laser, laser source manufacturer: TRUMPF, laser source model: TruDisk 3000, laser hours: 8,000 h, laser power: 3,000 W, laser wavelength: 1,030 nm, TRUMPF TruLaser Cell 8030 – 3D Laser – 2017 – 3 kW TruDisk is one of the most advanced and efficient 3D laser cutting machines in the world, widely used in the automotive industry, especially for processing hot-formed stamped components, body parts, rocker panels, and B-pillars. The machine is equipped with a TRUMPF TruDisk 3000 fiber laser (3 kW), offering high cutting quality, process stability, and low operating costs. The system features a 5-axis motion system and a spacious, ergonomic working chamber. Technical Data: Crsdjxxl A Espfx Aiioi Manufacturer: TRUMPF Laser- und Systemtechnik GmbH (Germany) Model: TruLaser Cell 8030 Type: L60 Year of manufacture: 2017 Serial number: S1631C0399 Laser: TRUMPF TruDisk Laser type: solid-state fiber laser Laser power: 3000 W (3 kW) Wavelength: 1030 nm Operation: CNC Controller manufacturer: TRUMPF / Beckhoff Controller model: Beckhoff CX-Series (CX2030 / CX2040, TruControl system) Power supply: 400 V / 50 Hz Connected load: 45 kVA Protection: 3 × 100 A Media: electric + pneumatic (no hydraulics) Motion axes: 5-axis 3D machining Maximum cutting thickness: Mild steel: up to 6 mm Stainless steel: up to 4 mm Aluminium: up to 3 mm

Condition: good (used), functionality: fully functional, Year of construction: 2011, operating hours: 65,000 h, controller manufacturer: Siemens, laser source manufacturer: TRUMPF, laser power: 3,200 W, sheet thickness steel (max.): 20 mm, sheet thickness stainless steel (max.): 12 mm, sheet thickness aluminum (max.): 8 mm, travel distance X-axis: 3,000 mm, travel distance Y-axis: 1,500 mm, travel distance Z-axis: 115 mm, type of cooling: water, TRUMPF TruLaser 3030 – 4 kW (L20) Technical data: Manufacturer: TRUMPF Type: TruLaser 3030 – 3.2 kW (L20) Year of manufacture: 2011 Working area: 3,000 x 1,500 x 115 mm Codpfxe Ahfqas Aiisri Control system: Siemens Sinumerik 840 D Laser power: 3,200 watts Max. sheet thickness, structural steel: 20 mm Max. sheet thickness, stainless steel: 12 mm Max. sheet thickness, aluminum: 8 mm Operating hours: NC approximately 65,000 h (May 2026) Beam on approximately 34,500 h - Max. workpiece weight approx.: 900 kg - Max. simultaneous speed approx.: 140 m/min - Smallest programmable path dimension approx.: 0.01 mm - Positioning deviation: +/- 0.05 mm - Average positioning spread: +/- 0.03 mm - Footprint approx.: L 9,300 x W 4,600 x H 2,200 mm - Weight approx.: 12,000 kg Standard equipment: Machine features: - Enclosed machine frame with integrated laser unit - Motion unit for highly precise machining - Torque drive in combination with linear direct drives - Enclosed beam guidance - Cooling unit - Automatic pallet changer - Longitudinal conveyor for small parts / scrap - Ergonomic control panel with touch color screen - Work area lighting - Positioning laser diode - PierceLine - FocusLine - NitroLine - PlasmaLine TRUMPF laser: - CO2 laser TruFlow 3200 with low-maintenance turbo radial blower - High-frequency excitation - Laser control system TASC - Laser power control - Laser logbook function Cutting head: - Single-cutting head strategy - Laser cutting head with 250 mm lens - Universal cutting head quick-change system (UTI) with bus connection - LensLine - ControlLine: Height control and sheet edge detection Control system: - Ergonomic control panel with 17” touch color screen - Simple operation - Fast reproduction - Automatic shutdown - ContourLine - FastLine - FlyLine - MicroWeld - Production plan - Teleservice, diagnostic functions Data transfer: - USB interface - RJ-45 network connection Safety: - CE marking - Light barriers - Multi-chamber extraction system and compact dust collection system - Machine enclosure with Makrolon panels

Condition: good (used), Year of construction: 2012, operating hours: 43,313 h, controller model: Siemens Sinumerik 840 D, laser power: 5,000 W, travel distance X-axis: 3,000 mm, travel distance Y-axis: 1,500 mm, travel distance Z-axis: 115 mm, No minimum price – guaranteed sale to the highest bidder! TECHNICAL DETAILS Laser power: 5,000 watts Working area: 3,000 × 1,500 × 115 mm Max. sheet thickness, steel: 25 mm Max. sheet thickness, stainless steel: 20 mm Max. sheet thickness, aluminum: 20 mm Max. speed: 235 m/min Accuracy: 0.10 mm MACHINE DETAILS Control model: Siemens Sinumerik 840 D Operating hours: 66,934 h / 43,313 h Dimensions & Weight Dimensions (L x W x H): 8,300 x 4,800 x 2,400 mm Weight: 12,000 kg EQUIPMENT Solid-state laser TruDisk 5001 with one LLK output Light guide cable according to standard layout Laser cooling unit (water-air) Code Ah Rl Ujpfx Aiisri Excitation via pump diodes Laser power control Laser logbook function Universal cutting head with fully adaptive lens system Protective glass against lens contamination Condition monitoring of the protective glass ControlLine: Height control and sheet edge detection

Condition: like new (used), functionality: fully functional, Year of construction: 2024, operating hours: 100 h, laser type: diode laser, laser source manufacturer: TRUMPF, laser source model: TruDisk 24001, laser hours: 10 h, laser power: 24,000 W, warranty duration: 6 months, Equipment: CE marking, centralized greasing system, cooling unit, documentation/manual, dust extraction, emergency stop, nozzle changer, safety light barrier, Standard Equipment Machine - Work area: 4000 x 2000 mm - Enclosed machine frame - Longitudinal conveyor belt - Motion unit for highly precise machining - Gantry drive in combination with linear direct drives - Cooling unit for machine and laser (water-air) - Work area lighting - Positioning laser diode - Spray device - Automatic nozzle cleaning - Integrated control cabinets - Integrated cabinet - Enclosed beam guidance via laser light cable (LLC) - Machine status indicator - Machine for ambient temperatures up to 45 °C - Transport and assembly device TRUMPF Laser - Excitation via pump diodes - Laser power control Cutting Head - Universal cutting head with fully adaptive lens system - Protective glass - Online condition monitoring of the protective glass - Dynamic Focus Control - Automatic nozzle centering Control System - Fast re-production - SINUMERIK control system - Ergonomic control panel with 21.5″ wide- screen multi-touch color display - Integrated technology data - Automatic shutdown - Programmable gas selection for pressure/cutting - Microweld - Remote support interface - Production plan - Multi-sheet processing - Condition Guide - Cutting Guide Functions - AdjustLine - BrightLine fiber - Smart Nozzle Automation - DetectLine - Drop&Cut - Integrated camera 1 for process monitoring - ControlLine - FlyLine - PierceLine - PlasmaLine - High-speed cutting package - High-speed cutting package Eco - Copper cutting package - Brass cutting package Data Transfer - USB interface - RJ-45 network interface - Online Update Manager Safety - CE marking and EC Machine Directive - Light barriers - Multi-chamber extraction system - Electric roll-up roof - Machine enclosure with certified viewing window door on the right and left Extended Standard Equipment - Compact dust collector - Support strips made of structural steel - Automatic pallet changer in Codo Afxu Sopfx Aiieri longitudinal direction (standard/heavy-duty) - Nanojoints - Smart Rerun Extended Machine Equipment Extended Laser Equipment - External solid-state laser TruDisk 24001 with BrightLine fiber - Separate laser power supply Additional Cutting Packages - High-speed cutting package Eco - Sheet thickness extension cutting package Extended Machine Equipment - Machine for ambient temperatures up to 45 °C - Prefilter for gases N2 + O2

Condition: good (used), functionality: fully functional, Year of construction: 2011, Trumpf TruLaser 5030 L16 in good condition for sale. Optional available with Liftmaster. The machine is being sold due to a plant upgrade. Working area: 3,000 x 1,500 mm Laser source: CO₂ laser Laser power: 5 kW Year of manufacture: 2011 Control system: Siemens Sinumerik Crjdpfx Aszlttloiiji Max. sheet metal size: 3,000 x 1,500 mm Processable materials: Steel Stainless steel Aluminum Immediately available Inspection possible at any time by appointment.

Condition: excellent (used), functionality: fully functional, Year of construction: 2008, operating hours: 36,000 h, laser source manufacturer: TRUMPF, laser power: 4 W, overall weight: 13,140 kg, total length: 9,300 mm, total width: 4,600 mm, Manufacturer: TRUMPF Type: TRUMATIC L 3030 Year of manufacture: 2008 Table dimensions: 3000 x 1500 x 115 mm Power: 4000 Watts Control system: Siemens Sinumerik 840 D Max. thickness of sheet metal that can be cut / steel: 20 mm Max. thickness of sheet metal that can be cut / stainless steel: 15 mm Max. thickness of sheet metal that can be cut / aluminum: 10 mm Max. cutting speed: 60/85 m/min Accuracy: +/- 0.1 mm Crjdpfxszy Huxe Aiisi Length: 9,300 mm Width: 4,600 mm Height: 2,000 mm Weight: 13,140 kg

Condition: used, functionality: fully functional, Year of construction: 2021, control type: CNC control, degree of automation: automatic, controller manufacturer: KUKA, controller model: KRC4, laser type: fiber laser, laser source model: TruDisk 4001, type of cooling: water, Equipment: cooling unit, documentation/manual, dust extraction, safety light barrier, - Trumpf TruLaser Weld 5000 - 2021/2022 Year Model - Advanced "turnkey" robotic welding cell - 6-axis industrial robot arm - Enclosed safety housing - Multi-weld techniques & Intelligent Assist System to detect workpiece placement - AI Welding Robot - Serial No. 1422667 - Robot Gantry / Linear Unit KUKA KL 4000 - Serial No. 153080 - Two Axis Workpiece Positioner Model DKP-400 V5 -Serial No. 154987 - TruDisk 4001 - High-power solid-state disk laser source - Serial No. L5211E3364 - Technotrans Fluid/Water Chiller System Model RL 16/0 SK V2 NEC Grav MIZ 1" - Serial No. 40000135731 - KUKA Robot Controller KRC4 -Serial No. 3121117 - Rittal TopTherm Blue E Wall-mounted cooling system - Serial No. 2021K000144111 - Camfil Air Pollution Control Dust Extraction System - Model MF 8-8 A2 Serial No. 10011175 - Two Station Index Rotary Positioner Codpfx Aiozy T Tzsieri - Equipment available after project completion, available from October 2026 - Within the machine price: Machine operational software comes with the machine - Available at additional costs: Programming solution software available - Other opportunities at additional cost: Extensive Research data library available for weld parameters including some structurally tested and certified parameters. Operator & programmer training available. If you have any questions or need more information, feel free to send us a message or give us a call.

Condition: ready for operation (used), functionality: fully functional, Year of construction: 2018, operating hours: 16,275 h, Control SINUMERIK 840D SL Laser source TruDisk 3001 Laser power 3,000 W (3 kW) X-axis travel 3,000 mm Y-axis travel 1,500 mm Z-axis travel 115 mm Max. axis speed X / Y / Z 100 / 100 / 100 m/min Max. simultaneous speed X-Y 245 m/min Max. sheet thickness – mild steel 20 mm Max. sheet thickness – stainless steel 15 mm Max. sheet thickness – aluminum 15 mm Max. sheet thickness – copper 4 mm Max. workpiece weight 900 kg Transport width 2,980 mm Machine weight 12,000 kg Connected electrical load 37 kVA Compressed air 6 bar Dimensions (L × W × H) 9,400 × 5,100 × 2 400 mm Accessories, Standard Equipment • Automatic pallet changer • Enclosed work area • Chiller unit (or Cooling unit) • Integrated electrical cabinet (or Control cabinet) • Conveyor belt • Work area lighting • Positioning laser diode • Spraying device • FocusLine • NitroLine • PlasmaLine • Automatic nozzle cleaning • Cutting head and adaptive lens system • 17-inch touchscreen • FastLine • Teleservice • USB • CE marking Crjdpo Af U Hqofx Aiisi • Light barriers (or Safety light curtains) • Monitoring system Optional Equipment • Automatic nozzle changer • Drop&Cut • Dot Matrix Code The machine is in good working order and can be seen under power after making an appointment.

Condition: good (used), functionality: fully functional, Year of construction: 2014, control type: CNC control, laser type: fiber laser, laser power: 4,000 W, sheet thickness steel (max.): 20 mm, sheet thickness aluminum (max.): 20 mm, sheet thickness copper (max.): 6 mm, workpiece weight (max.): 900 kg, Equipment: CE marking, cooling unit, documentation/manual, dust extraction, safety light barrier, CNC laser cutting system TruLaser 3030 Fiber (L49) 4000 Watt X working area max.: 3000 mm Y working area max.: 1500 mm Z working area max.: 115 mm Control system: Siemens Sinumerik 840D SL Laser power: 4000 Watt Crsdpfxsz Rl Taj Aiiji Standard equipment: Machine - Closed machine frame - Integrated cabinet with roller shutter - Automatic pallet changer in longitudinal direction - Torque drive in combination with linear direct drives - Closed beam guidance via fiber optic cable - Cooling unit - Integrated control cabinets with interior lighting - Longitudinal conveyor belt - Work area lighting - Positioning laser diode - Spray device - PierceLine - FocusLine - NitroLine - PlasmaLine - Microweld - Automatic nozzle cleaning TRUMPF Laser - Integrated solid-state laser TruDisk 3001 with 1 fiber optic cable outlet - Excitation via pump diodes - Laser power control Cutting head - Universal cutting unit - Single-cutting head strategy - Protective glass against lens contamination - Condition monitoring of the protective glass - ControlLine: Height control and sheet edge detection Control system - Simple workshop programming - Fast reproduction of parts - Control system Sinumerik 840D SL - 17" touch color screen - Integrated technology data - Automatic shutdown - Programmable cutting gas/pressure selection - FastLine - FlyLine - AdjustLine - Teleservice via the Internet Data transfer - USB interface - RJ-45 network connection Safety - CE marking - Light barriers - Multi-chamber extraction system - Compact dust extraction system - Machine cladding with certified viewing window door right - Sliding roof + Nozzle changer

Condition: ready for operation (used), functionality: fully functional, Year of construction: 2017, laser power: 6,000 W, CNC laser cutting machine TruLaser 3040 Fiber (L50) 6000 Watt X working area max.: 4000 mm Y working area max.: 2000 mm Z working area max.: 115 mm Control system: Siemens Sinumerik 840D SL Laser power: 6000 Watt Sheet metal thickness steel max.: 25 mm Sheet metal thickness stainless steel max.: 25 mm Sheet metal thickness aluminum max.: 20 mm Sheet metal thickness copper max.: 8 mm Standard equipment Standard features Machine - Closed machine frame - Integrated cabinet with roller shutter - Torque drive in combination with linear direct drives - Closed beam guidance via laser light cable (LLC) - Cooling unit - Integrated control cabinets with internal lighting - Automatic sheet metal changer in longitudinal direction - 19" touch color screen - Longitudinal conveyor belt - Work area lighting - Positioning laser diode - Spraying device - PierceLine - FocusLine - NitroLine - PlasmaLine - Automatic nozzle cleaning - Transport and assembly device TRUMPF Laser - Solid-state laser TruDisk 3001 with one LLC output - Excitation via pump diodes - Laser power control Cutting head - Universal cutting head - Single cutting head strategy - Protective glass against lens contamination - Condition monitoring of the protective glass - ControlLine: Height control and sheet metal edge detection Control system - SINUMERIK 840D SL control system - Simple workshop programming - TruTops Laser via network access - Fast reproduction - Integrated technology data - Automatic shutdown - Programmable cutting gas/pressure selection - ContourLine - FastLine - FlyLine - AdjustLine - Teleservice via Internet Data transfer - USB interface - RJ-45 network connection - Wireless Operation Point (basis for Visual Online Support) Safety - CE marking - Light curtains - Multi-chamber extraction system - Compact dust collection system Cedpfx Ajz Rl Eieiiori - Machine enclosure, certified viewing window, door on the right - Sliding roof - Nozzle changer - CoolLine

Condition: good (used), functionality: fully functional, Year of construction: 2007, laser type: CO₂ laser, laser power: 2,700 W, X working range max.: 6500 mm Y working range max.: 200 mm Laser power: 2700 watts Control system: SINUMERIK 840D Standard equipment: - Robust machine frame with integrated laser unit - CO2 laser TruFlow 2000, high-frequency powered, cooling unit - Drives: Maintenance-free three-phase AC servomotors - NitroLine high-pressure cutting - Fast processing with SprintLine - Cutting gas pressure setting programmable - Laser cutting head with 5’’ lens - Cutting head quick-change system - Laser power control - Laser logbook function - Automatic shutdown - Work area lighting - Control system Sinumerik 840D: Open control system based on PC, easy operation, online help, diagnostic function, maintenance logbook, technology data, remote service, 3.5’’ floppy disk drive, RJ45 network connection Crodj Ahkc Tepfx Aiiei - Safety: Multi-beam light barriers, beam guidance completely enclosed and ventilated, compact dust collector, protective cabin - Unloading station PRS 3001 with brush table - Clamping jaw set D 20-85mm and D 85-150mm Optional equipment: + 2000 on Laser TruFlow 2700 + SeamLine Tube + LoadMaster Tube 6.5 m with bundle trough + Unloading station 6m with belt table + Focus line

Condition: good (used), functionality: fully functional, Year of construction: 2016, machine/vehicle number: L49/A0221E0510, TRUMPF TruLaser 3030 fiber + TruLaser 5030 – with 2 PalletMaster systems and a STOPA sheet metal storage system (49 slots) Complete, automated laser cutting system – preferably sold as a complete package. Crsdpfx Ais Afpyfoisi For sale is a comprehensive TRUMPF laser cutting system consisting of two laser cutting machines, each with a PalletMaster and connection to an automated STOPA sheet metal storage system. The system is particularly suitable for automated sheet metal processing and efficient material flow. 1) TRUMPF TruLaser 3030 fiber (L49) – 4 kW – Year of manufacture 2016 For sale is a TRUMPF TruLaser 3030 fiber (L49) with 4 kW laser power and extensive special equipment. The machine is in good condition. Technical data: Manufacturer: TRUMPF Model: TruLaser 3030 fiber (L49) Year of manufacture: 2016 Condition: Good Laser power: 4,000 watts (4 kW) Laser source: TRUMPF TruDisk 4001 Cutting area: 3,000 × 1,500 mm Control system: Siemens SINUMERIK 840D SL Drive system: Linear and torque direct drives Operation: 17-inch touch color display Equipment: BrightLine fiber Automatic pallet changer Automatic nozzle changer PierceLine FocusLine NitroLine PlasmaLine FlyLine FastLine ContourLine AdjustLine ControlLine (automatic height control) Automatic nozzle cleaning Integrated camera Drop&Cut Electric roll-up roof Conveyor system Extraction and filter system Cooling system Automation and Software Automation interface for external loading and unloading systems TruTops Fab Integration TRUMPF TruTops Laser Network connection and USB interface 2) TRUMPF TruLaser 5030 (L52) – 6 kW CO₂ laser cutting system Technical data: Manufacturer: TRUMPF Model: TruLaser 5030 (L52) Year of manufacture: 2015 Laser: TruFlow 6000 CO₂ laser Laser power: 6,000 watts (6 kW) Working area: 3,000 × 1,500 mm Drive: Linear direct drives (gantry) Cutting head: Universal cutting head with 250 mm lens Control system: 17-inch touch color screen Automatic pallet changer Equipment and functions: BrightLine CoolLine PierceLine / FocusLine / NitroLine PlasmaLine / LensLine / ControlLine Smart Nozzle Automation (automatic nozzle changer) Smart Collision Prevention Automatic height control Cutting head lens with RFID chip Integrated cooling unit Longitudinal conveyor TruTops Laser software Other options available: Integrated camera systems Drop&Cut scrap material processing Automation interface PalletMaster connection TruTops Fab Integration 3. Automation – 2 × TRUMPF PalletMaster One PalletMaster per laser cutting machine 20 storage spaces each Modernization of PalletMaster and TKL by +profilsystems Connection to the STOPA storage system 4. STOPA sheet metal storage system Automated sheet metal storage system 49 storage spaces Connection to the laser cutting systems via the existing automation. Sale and Inspection The complete system, consisting of both TRUMPF laser cutting machines, the two PalletMaster systems and the STOPA storage system, is preferably sold as a whole. Individual sale is possible by agreement. Inspection by appointment. Price on request.

Condition: excellent (used), functionality: fully functional, Year of construction: 2012, operating hours: 55,771 h, laser hours: 35,157 h, laser power: 3,200 W, sheet thickness (max.): 20 mm, sheet thickness steel (max.): 20 mm, sheet thickness aluminum (max.): 8 mm, table length: 3,000 mm, table width: 1,500 mm, travel distance X-axis: 3,000 mm, travel distance Y-axis: 1,500 mm, travel distance Z-axis: 150 mm, positioning speed: 140 m/min, positioning accuracy: 0.02 mm, year of last overhaul: 2025, feed length X-axis: 3,000 mm, feed length Y-axis: 1,500 mm, feed length Z-axis: 150 mm, Equipment: centralized greasing system, cooling unit, documentation/manual, emergency stop, safety light barrier, The laser was fully functional and in very good technical condition until its professional dismantling. The machine was regularly serviced by an authorized service provider, and a complete service history is available. In 2025, all mirrors were completely replaced. The dismantling and professional disconnection of the machine were carried out by an authorized service provider. The machine is currently safely stored in a dry warehouse and is ready for shipment. Videos of the machine in operation are available. Credpfx Aisv Hxbbjioi