Used Transmission Shaft for sale (15,693)

Condition: used, Year of construction: 2021, Lindner Urraco 95 DK – Year of Manufacture 2021 – Well-Maintained Condition For sale is a Lindner Urraco 95 DK from 2021 with 7,230 recorded operating hours. The shredder is in a well-maintained and ready-to-use condition. The exact condition can be seen in the photos. The machine is equipped with the DK4 package, featuring a reinforced gearbox and a reinforced cutting frame. Gbsdox Nkhqjpfx Agbeg — Specification / Scope of Delivery • 1 set of armoured shafts HW 8/10 with clearing combs and breaker bar, suitable for scrap and waste • 1 set of used shafts HW 8/10 with clearing combs and breaker bar, also for scrap and waste • DK4 package with reinforced gearbox and reinforced cutting frame — Technical Data – Lindner Urraco 95 DK Model: Lindner Urraco 95 DK Year of manufacture: 2021 Operating hours: 7,230 Engine power: approx. 566 kW (approx. 770 HP) Emissions standard: Stage V / Tier 4f (depending on version) Shaft length: approx. 2,500 mm Shaft diameter: approx. 870 mm Maximum torque: up to approx. 480,000 Nm Machine weight: approx. 46 t Dimensions (L x W x H): approx. 9.2 m x 2.55 m x 3.2 m Chassis: crawler tracks, hydraulically driven Application areas: scrap, commercial waste, bulky waste, mixed waste, wood, recycling material — Condition: Well-maintained machine Fully operational Sale as inspected on site Additional Information / Maintenance History The machine had a full maintenance and service contract directly with Lindner until recently. All maintenance and service work was carried out professionally in accordance with the manufacturer’s specifications and documented. Notes: • Sale is without any warranty or guarantee. • No return or renegotiation. • Subject to prior sale. All information provided is without obligation. The seller accepts no liability for possible errors, omissions, or changes in the details. Sale is exclusively subject to prior sale.

Condition: used, overall weight: 1,500 kg, rotor diameter: 252 mm, total length: 1,800 mm, total height: 2,000 mm, total width: 1,200 mm, rotor width: 600 mm, power: 18.5 kW (25.15 HP), rotational speed (max.): 90 rpm, filling opening width: 600 mm, filling opening length: 800 mm, No. 3255 Single-shaft shredder WEIMA WL 4 Gbodpox Hhk Rofx Agbog Used Quiet-running and slow-running V-rotor system Motor power main drive 18.5 kW Rotor diameter 252 mm Rotor width approx. 600 mm Rotor speed approx. 90 rpm Hopper volume 0.6 m3 Inlet cross-section 800 x 600 mm LW Reversible blades, concave ground Automatic operation / manual operation Sieve perforation 15 mm Suction nozzle 160 mm Transport dimensions approx. 1800 x 1200 x 2000 mm LWH Weight approx. 1500 kg Sale on behalf of customer, ex location near 73430 Aalen, without dismantling, without transport and assembly Dismantling, loading and transport by us optionally possible Subject to errors in the description and price To avoid possible misunderstandings, an on-site inspection is possible and recommended by appointment Sold as is Technical specifications, condition description, year of construction and scope of delivery according to manufacturer's brochure or previous owner, without guarantee Subject to prior sale For used machines, any warranty is excluded, the following applies: “sold as seen” Pictures and videos serve as examples and do not represent the actual scope of delivery Terms of payment: Prices plus VAT, payment before collection or shipment Terms of delivery: ex location

Condition: excellent (used), Year of construction: 2003, machine/vehicle number: MBUT1-9, Cable shredder Pre-shredder Chip crusher Shredder Two-shaft shredder Rotor shear Rotor knife Chip shredder 5 pieces available! Manufacturer TBE Habermehl TYPE ZH400, BJ 2003 Power 400V 3KW with pumping station, without control The shredder can also be operated separately from the chip conveyor Dimensions complete LxWxH 200x85x120cm (motor), 110x55x31cm LxWxH (shredder), Opening about 45x40cm Ideal for pre-shredding cables with plugs, plastic, metal, wood etc. Warning - not a toy. The shredder eats almost everything. Very robust engine and transmission Used condition, function flawlessly until dismantling Godpfxjikm Nre Agbsbg Collection only by appointment in 75053 Gondelsheim Shipping by forwarding agency possible, please inquire with zip code

Condition: excellent (used), Year of construction: 2015, operating hours: 2,000 h, functionality: fully functional, Type: DW 3060 Type D Gbodpfx Agsxrtt Esbeg Year of manufacture: 07/2015 Location: Germany Operating hours: 1,950 h Available from: by arrangement Specification: Diesel engine MTU R 1300 EUROMOT IV, 320 kW Total weight: approx. 25,000 kg Hydrostatic drive 18-channel wireless remote control Rear conveyor 5.5 m, hydraulically foldable Comb extension Moisturizing system 21 roller teeth, Form C DoubleLock quick-change system 20 trapezoidal comb teeth Overband magnet Hopper extension Service details The machine is in very good technical and optical condition Before delivery, the machine will receive a brand new planetary gearbox Before delivery, the machine will be technically inspected and serviced The machine is sold in the condition existing at the time of handover. The seller assumes no liability for defects. Interim sale, changes, and repairs reserved.

Condition: excellent (used), CATALOGUE NUMBER 7848 TECHNICAL DATA - Minimum width of the central prism after cutting: 70 mm - Minimum length of the cut log: 1300 mm - Maximum diameter of the cut log: 350 mm - Shaft diameter: 70 mm - Circular saw blade diameter: 500 mm - 2 feed speed options + forward/reverse + inverter control - Maximum number of saw blades on the upper and lower spindle: 4 pcs each - Lower spindle drive motor power: 22 kW - Upper spindle drive motor power: 18.5 kW - Feed drive motor power: 1.5 kW - Track length: 4450 mm - Additional track extension: 3000 mm - Overall dimension of the additional extension: 3700 x 520 x 950 mm - Extraction outlet diameter: 3 x 200 mm - 3 rows of pawls before the blades - 1 row of pawls after the blades - Dimensions (L/W/H): 6010 x 1500 x 2000 mm - Weight: approx. 1400 kg ADVANTAGES - Polish manufacture, WALTER brand - Additional 3000 mm track extension - DTR documentation – used machine, very good condition Godpfx Agox E Shwjbjbg Net price: 37,900 PLN Net price: 9,020 EUR based on the exchange rate of 4.2 EUR (Prices may vary with significant fluctuations)

Condition: used, New, unused, sharpened and used end mills and drills for CNC machines as shown. length: Miscellaneous diameter: Miscellaneous Shank: Miscellaneous mass: 12 kg Application: woodwork Godpfx Agjvy Apiebobg

Condition: good (used), Year of construction: 2008, rotor diameter: 368 mm, WEIMA Crusher Series HWV 3000 (37 kW) and the Single-Shaft Shredder WL12 (30 kW) Ideal for pre-shredding wood waste such as pallets, followed by metal separation and secondary shredding. Advantages: Two-stage process: Pre- and post-shredding for maximum efficiency. Versatile use: Wood chips for heating systems or briquetting presses. Low-noise operation Technical details – HWV 3000: - Power: 37 kW - Dimensions (hopper): 3375 mm width x 1630 mm height Gbsdpsx I S Hfsfx Agbsg - Cutting knives: 58 knives in two rows Technical details – WL12/30: - Power: 30 kW - Shaft diameter: 368 mm - Screen: 15/20 mm Applications - Wood waste processing and recycling - Energy generation through wood chips or briquetting

Condition: used, New: Yes Field of application: Mining Power: 110 kW (150 HP) Empty weight: 35.000 kg Dimensions (LxBxH): 700 x 240 x 240 cm Engine type: V-type Volume of the tank: 20 m^3 Productivity: 400 tph Log(Blade) Washer(With SKF AUTOMATIC LUBRICATION) Model : LW25 Machine Size : 2000 X 7000 X 2 (Double row) Gjdpsx D Dagofx Agbebg Drive System : 2 X 55 kW Feeding Size : 0 - 50mm Main Body : It is Manufactured ST37 A1 Quality 8mm Sheet as Twisted er Sheet to Which the Front Reducer Group is Connected Will be Manufactured From 12 mm Sheet Metal. Helice: Double Row Carrier Spiral Spoons ST 37 are Manufactured From 8 mm Sheet and the Arms Against Wear Will be Covered With Casting, Helices Will be Hardox Coated. Shaft : Made of Cr-Ni-Mo Alloy Steel. Housing : GS52 Steel Casting Parts Used. Bearing : SKF or FAG Mark Heavy Duty Spherical Roller Bearings.

Condition: used, Year of construction: 2019, operating hours: 16,500 h, functionality: fully functional, machine/vehicle number: #005, overall weight: 46,100 kg, control cabinet length: 5,000 mm, control cabinet width: 2,400 mm, control cabinet height: 2,600 mm, power: 450 kW (611.83 HP), type of input current: DC, rotational speed (max.): 32 rpm, Equipment: rotational speed infinitely variable, Equipment - 450 kW DC power – with ABB frequency inverter including DTC control - Bevel helical gear unit – roller speed up to approx. 32 rpm / variable via belt drive and inverter control - BioPower roller with 42 teeth - Roller length 3,000 mm, Ø 800 mm - Infinitely variable speed control Gbjdpfjx I A Akox Agbeg - Tooth type: form C3 trapezoidal tooth, 174 mm - Wear-resistant armor plates on the roller - Hydraulically adjustable counter comb – cutting gap adjustment via display - 4 comb cylinders - Central lubrication system - Hydraulically opening comb hatch - Pre-assembled main control cabinet - Local operator panel at the machine - Start-up warning system - Engine compartment lighting - Paint finish: RAL 2011 deep orange The machine is equipped with the following additional features: - Mounting strip for limiter - Limiter elements - Automatic comb positioning - Automatic comb cleaning system - Machine frame height: 1,200 mm - 3-sided hopper extension, left or right - Flashing light module - Solenoid valve for water spraying device - Radio remote control (EU) - Profibus integration - 2 additional power outputs on the control cabinet, up to 7.5 kW each - Control cabinet container / air-conditioned, LxWxH 5,000x2,400x2,600 mm The machine can receive comprehensive reconditioning at our factory upon request. - OPTIONAL ONLY: Discharge conveyor belt AA 8,350 x BB 1,200 mm, 5.5 kW, reversible Miscellaneous: - Display in German; English available - Stickers and operator panel labeling in German; English available - Warning stickers in German; English available - Operating manual in German (print and digital) (can be translated for local requirements)

Year of construction: 1995, condition: good (used), Single-shaft shredder, waste shredder, cutting mill, auxiliary mill, granulator, shredder, plastic shredder, granulate mill, granulator, rotor mill, recycling technology -Condition: Single-shaft shredder is equipped with a good set of blades. -Manufacturer: Vecoplan, Side-mounted mill cutting mill -Type: VAZ120/105 -Processing capacity: 200-3000 kg/h -Number of sieves: 2 pieces Ø20 mm, Ø30 mm -Drive motor: 18.5 kW -Number of cutting blades: 27 pieces -Number of counter blades: 1 piece -Inlet cross-section: 1240 x 1075 mm -Rotor width: 1075 mm -Rotor diameter: 230 mm -Dimensions: 2000/2700/H2370 mm -Weight: 2800 kg Gsdpoxlcqtjfx Agbjbg

Condition: used, GENERAL Impeller diameter: 200 mm Agitator: Propeller Other: Total length approx. 1,060 mm Location: Bremen Shaft diameter: 35 mm Shaft length: 910 mm Gbjdpsx Dlnrjfx Agbeg Product-contact material: V4A 1.4401/04 (AISI316) Condition: used

Condition: used, Year of construction: 2017, Weima HWN-2-1000 chipper for shredding wood and similar materials such as plastics or cardboard. The machine features a robust design, a large feed hopper, and two powerful rotors for continuous material feeding. Optional new blades available at an additional cost. Gbedpfxexvzzxo Agbog rotor diameter: approx. 354 mm rotor length: 1.000 mm Number of knives: 2 x 72 drive power: 2 x 18.5 kW Dimensions: 2.4 x 2 x 2 m sieve size: 10 mm

Condition: used, Year of construction: 2020, functionality: fully functional, cutting height (max.): 150 mm, saw blade diameter: 425 mm, cutting width (max.): 600 mm, chain width: 600 mm, type of input current: three-phase, input voltage: 400 V, - Operating manual, CE - Year of manufacture: 2020 TECHNICAL SPECIFICATIONS: - Minimum thickness of processed beam: 50mm - Maximum thickness of processed beam: 150mm - Maximum width of processed beam: 600mm - Minimum length of beam: 1200mm - Diameter of lower spindle: 70mm - Maximum saw blade diameter: 425mm - Spindle motor power: 30kW - Feed drive motor power: 2.2kW - Infeed roller table dimensions (width/length): 700 x 3000mm, roller length 640mm - Outfeed roller table dimensions (width/length): 700 x 3000mm, roller length 640mm - Spindle motor speed: 1420 rpm - Feed motor speed: 1420 rpm - Upper sawdust outlet diameter: 200mm - Lower sawdust outlet diameter: 200mm - Supply voltage: 3x400V, 50Hz Overall dimensions: - Length: 2980mm Gedpfx Ajx Dkyyogbobg - Width: 1250mm - Height: 1670mm

Condition: new, power: 132 kW (179.47 HP), fuel type: electric, color: black, Field of application: Mining Empty weight: 16.500 kg Dimensions (LxBxH): 250 x 300 x 400 cm Make of engine: Siemens Required tractor power: 132180200 hp Volume of the tank: 100 m^3 Productivity: 50 tph 1-Model : VSI 700 -CR Max Feed : 35 mm. Hard Condition Rotor Diameter : 760 mm. / Off Std. Rotor Rotor Speed : 50-70 m / s. Drive : 132 kW / 1500 rpm. Capacity : 40-60 tons / hour 0-5 sand production at 5-32 mm feed. Total Capacity : 80-120 tons / hour Weight : 8,500 kg Rotor Diamond Inserts (Two-row - 6 pcs Ductile Iron Tungsten Carbide Tipped) Other Wear Parts (2 Molybdenum, 22 Chrome Alloy Castings) Electric Motorized Hydraulic Unit (Used for Belt tensioning and Upper Body Lifting.) One-sided maintenance platform with ladder. Drive pulley for two separate speeds (1400 rpm - 1600 rpm) Vibration sensor switch Maintenance Crane 3- Model : VSI 800 -CR Max Feed : 50 mm. Rotor Diameter : 1000 mm. / Off Std. Rotor/Closed Rotor Rotor Speed : 50-70 m / s. Drive : 180 kW / 1500 rpm. Capacity : 70-100 tons / hour 0-5 sand production at 5-50 mm feed. Total Capacity : 100-150 tons / hour VSI-900-CR 1. Rotor Diamond Inserts (Two-row - 6 pcs Ductile Iron Tungsten Carbide Tipped) 2. Other Wear Parts (2 Molybdenum, 22 Chrome Alloy Castings) 3. Electric Motorized Hydraulic Unit (Used for Belt tensioning and Upper Body Lifting.) 4. One-sided maintenance platform with ladder. 5. Drive pulley for two separate speeds (1400 rpm - 1600 rpm) 6. Vibration sensor switch 7. Maintenance Crane 3-Model : VSI 900 -CR Max Feeding : 45 mm. Rotor Diameter : 900 mm. / CLOSE ROTOR Rotor Speed : 50-70 m / sec. Gbedpfex D A Ucex Agbeg Drive : 185 kW x 2/1500 rpm. Capacity : 70-80 tons / hour 0-5 sand production at 5-15 mm feed. Total Capacity : 230 tons / hour Weight : 14.500 kg Standard Equipments: 1.Electric motorized Hydraulic Unit (Used for Belt tensioning and Upper Body Lifting) 2. One-sided maintenance platform (galvanized grating and steps) 3. Drive pulley for two separate speeds (1400 rpm - 1600 rpm) 4. Automation control panel (Vibration sensor switch - Breaker feed control-working hours) 5. Maintenance Crane

Condition: excellent (used), Multiple-shaft circular saw (gang saw) by FOD BYDGOSZCZ* DPPA III 50E 620/120 Catalogue Number: 7407 TECHNICAL SPECIFICATIONS: Gedpfx Agjurkdzsbebg - Maximum cutting height: 120 mm - Maximum workpiece width: 700 mm - Working width of the shaft with saw blades: 620 mm - Maximum saw blade diameter: 450 mm - Saw blade bore diameter: 90 mm Upper side: - Kickback pawls - 2 toothed driven rollers Lower side: - Kickback pawls - 2 smooth driven rollers - Saw blade shaft - Smooth driven roller - 2 feed speed options - Feed motor: 4.4 kW - Main motor: 30 kW - Machine dimensions (LxWxH): 2370x1400x1800 mm - Weight: approx. 3000 kg – Polish production – Used machine, very good condition Net price: 38,900 PLN Net price: 9,260 EUR (based on an exchange rate of 4.2 EUR) (Prices may change depending on currency fluctuations) * MAR-MASZ guarantees the quality of your purchase but is not an authorized dealer for the manufacturer. All trademarks and names are used purely for informational purposes to identify the product. We only resell goods that have previously been placed on the market by the manufacturer. We have no business association with the manufacturer.

Condition: good (used), Stop for press brake, bending machine, guillotine shear, drive shaft -Drive shafts: for stop, from press brake EHT type EHP 11-40, 2 pieces -Length: 515 mm -Hole: Ø 25 mm Gbodpfegxnkkjx Agbsg -Price: complete -Dimensions: Ø 50 x 515 mm -Weight 5.1 kg/pc.

Condition: ready for operation (used), Year of construction: 2001, functionality: fully functional, machine/vehicle number: 11311, workpiece weight (max.): 30 kg, type of input current: three-phase, input current: 12 A, input frequency: 50 Hz, input voltage: 400 V, rotor diameter: 1,000 mm, Balancing Machine, vertical shaft. Measurement in two planes. Maximum rotor weight: 30 kg (tooling included). Automatic Indexing (rotor will, after measurement be positioned with correction location at the front). Rotor speed can be set for each programmable standard workpiece type. Some tooling is included. Machine is available because fans are no longer built by the customer. Gedpex H Aa Tsfx Agbebg

Condition: used, Overall length: 266 mm Gjdpfx Agolkciwjbsbg overall length: 266 mm D: 35 mm Available: 1 * Total length: 266mm, *D=35mm, * Available: 1st

Condition: new, Year of construction: 2019, pressure:400 t distance between columns:2500 mm stroke:600 mm Table dimensions:2500 x 2000 mm distance table - lower edge of ram:600 mm total power requirement:18 kW speed of forward flow:9 mm/sec Return Speed:19 mm/sec Gbedpfod Ttydex Agbsg :67 Lt./min. Total weight, approx.:26 t

Condition: used, Applicable material: Concrete Polygonmach offers high variety of concrete, mortar mixers. Pan,planetery, single shaft, twin shaft, cone mixers are our type of mixers. Every mixer type is developed for a concrete type or user application. Gbodpox D A Ivjfx Agbeg Twin shaft mixers are for high volume of standart concrete production. From 1 to 8m3 capacity abilitiy make this mixer the most preferable type. WE use ni-hard casting arms,paddles,caps,pallets, Specific bearings, automati lubrication system gives long life and easy to spare parts changes. Twinshaft mixer has got double shaft located paddles, arms, pallets, caps bolted on shaft. The inner mixer construction has wearing and abbrasive ability. Upn material sio2 rate , the lifespan of inner mixer changes. The body and side wearing plates made from Hardox400. Automatic lubrication is installed and programmable on customer request and requirements. Twinshaft mixer vary from 1 to 8m3 on request of customer. Multiple mixer operations is supported by our projects. This mixer is suitable for high volume of ready mix procductions. Twin shaft mixer has got high rate of homogenity in short time of period. Mobility: stationary Other characteristics: automatic Capacity: Max.: 6,250 l(1,651.1 gal)Min.: 1,000 l(264.2 gal)

Condition: new, We would like to present you with an offer for Protechnika shafts dedicated to MRW 2.85 and MRW 2.10.10 machines: MRW 2.10.10: - 6-10-10 - 8-10-10 - 10-10-10 - Steel shafts - Side combs - Breaking bar MRW 2.85: - 5-8-8 - 6-8-8 Gbedpfx Agjx Hx Hpjbog - 8-8-8 - 10-8-8 - Side combs - Breaking bars PROTECHNIKA is a company with 21 years of experience, actively engaged in the manufacture of spare parts and complete recycling lines from the very beginning of its operations. In recent years, we have expanded our portfolio to include the production of grinding shafts for slow-speed shredders. Through the implementation of automatic welding processes and our own proprietary production technology, we have been able to minimise production times while maintaining consistent, high quality. Grinding shafts are produced in series, which, among other benefits, enables us to partner with machine manufacturers on an OEM basis. What sets PROTECHNIKA apart from the competition? It's simple! - Certified 3.1 materials - TUV SUD Rheinland quality - ISO 9001 - Automated welding process / ISO 15613 / ISO 15614 - ISO 9606-1 certified welding personnel - ISO 9001:2015 - ISO 14001 - Independent design department able to meet any customer requirements - Our own RESEARCH AND DEVELOPMENT CENTRE Customer relations are our top priority, because their satisfaction is our success!

Condition: new, Year of construction: 2018, machine/vehicle number: DF0230, pressure:200 t distance between columns:1550 mm Gbsdpfx Agefxyklobog stroke:400 mm dimensions:ca. 4400 x 3250 x 4100 mm Table dimensions:1500 x 1500 mm distance table - lower edge of ram:1590 mm return capacity:20 t total power requirement:20 kW Oil Cooling:1,5 kW stroke speed:25 mm/sec down speed:10 mm/sec :250 l table plate:120 mm Table cut-out:550, 450, 350 und 200 mm table speeds:30 mm/sec

Condition: used, Field of application: Mining Gedpfsx Dh S Hox Agbsbg Explore the superior processing capabilities of the Polygonmach Coarse Material Washer, a state-of-the-art solution designed to exceed expectations in processing sand and gravel. Polygonmach, a leading name in the industry, constantly pushes the boundaries of innovation to bring high-quality, reliable solutions to businesses. The Polygonmach Coarse Material Washer is a fundamental tool in the industry, specializing in the thorough cleaning, classification, and dewatering of coarser fractions. Designed to handle robust materials such as sand and gravel, it significantly enhances the quality of your output, leading to increased customer satisfaction and business growth. Built with high-capacity processing in mind, our Coarse Material Washer employs powerful scrubbing technology. This action facilitates the removal of impurities, thus unlocking the true value of your raw materials. The result is high-quality end products that meet rigorous industry standards. One of the key features of the Polygonmach Coarse Material Washer is its replaceable heavy-duty paddles. These are engineered to withstand the harsh environment, thereby increasing machine lifespan and reducing maintenance costs. The robust design is well-suited to large-scale operations, delivering high-volume processing efficiently. Moreover, it comes with an adjustable weir plate that offers control over the water volume and the fines. This flexibility empowers you to produce materials of desired specification and moisture content, guaranteeing consistent product quality. The Coarse Material Washer from Polygonmach is not only highly functional but also user-friendly.

Condition: new, We would like to offer you shafts designed for machines such as PRO.S1, MRW 2.65, MRW 2.75. - Paddle shafts - Concrete shafts - Star shafts - Trapezoidal shafts - Cassette shafts PROTECHNIKA is a company with 21 years of history that has specialized in the production of spare parts and complete recycling lines since its inception. In recent years, we have expanded our portfolio to include the manufacturing of grinding shafts for slow-speed shredders. Through the implementation of automated welding processes and proprietary production technology, we have minimized production times while ensuring consistent, high quality. Grinding shafts are a serial product, which, among other benefits, allows us to cooperate with machine manufacturers on an OEM basis. What sets PROTECHNIKA apart from the competition? It's simple! - Certified 3.1 materials - TUV SUD Rheinland quality certification - ISO 9001 - Automated welding processes / ISO 15613 / ISO 15614 - ISO 9606-1 qualified welders - ISO 9001:2015 Gsdpfx Agsx Hx Erobjbg - ISO 14001 - An independent design department capable of meeting any customer requirement - Our own RESEARCH AND DEVELOPMENT CENTER Customer relations are of utmost importance to us, because their satisfaction is our success!

Condition: new, power: 132 kW (179.47 HP), fuel type: electric, color: black, Field of application: Mining Empty weight: 16.500 kg Dimensions (LxBxH): 250 x 300 x 400 cm Make of engine: Siemens Gsdpfxox A R Ege Agbjbg Required tractor power: 132180200 hp Volume of the tank: 100 m^3 Productivity: 50 tph Model : VSI 900 -CR Max Feeding : 45 mm. Rotor Diameter : 900 mm. / CLOSE ROTOR Rotor Speed : 50-70 m / sec. Drive : 185 kW x 2/1500 rpm. Capacity : 70-80 tons / hour 0-5 sand production at 5-15 mm feed. Total Capacity : 230 tons / hour Weight : 14.500 kg Standard Equipments: 1.Electric motorized Hydraulic Unit (Used for Belt tensioning and Upper Body Lifting) 2. One-sided maintenance platform (galvanized grating and steps) 3. Drive pulley for two separate speeds (1400 rpm - 1600 rpm) 4. Automation control panel (Vibration sensor switch - Breaker feed control-working hours) 5. Maintenance Crane