Used Traction Drive for sale (23,749)

Year of construction: 2011, condition: excellent (used), Lift&Drive 225P, electric, lifting manipulation trolley. Powder-coated steel and aluminum construction. Table dimensions: 100 cm x 40 cm. Minimum table height from the base: 67 cm. Cjdjf T R Nxepfx Aatohd Maximum table height from the base: 193 cm. Nominal lifting capacity: 225 kg. Brake on the rear wheels. In addition to the central brake, the trolley also features a directional lock for the rear wheels, making it easier for the operator to steer the trolley in a straight line. Manipulation trolleys designated with the letter P (Professional) are the largest, most stable, robust, and versatile devices.

Condition: used, Harmonic Drive planetary gearbox HPS-180-5-Di- removed from Demag Ergotech El-Exis S 60/370-310 - removed from running machine - fully functionalmanufacturer: Harmonic Drive type: HPS-180-5-Di Codpfx Aaoyxg S Rstjhd spare part no.: 12171266

Year of construction: 2002, condition: used, ABB ACS607-0170-3 Industrial Frequency Converter – Complete Cabinet For sale: ABB ACS607-0170-3 industrial frequency converter, installed in its original electrical control cabinet. This heavy-duty ABB ACS600 series drive was previously used in an industrial pump application. Technical specifications: * Manufacturer: ABB Oy, Finland * Model: ACS607-0170-3 * Product code: 64348566 * Year of manufacture: 2002 * Input voltage: 3-phase, 380–415 V * Input current: 259 / 299 A * Output current: 260 / 300 A * Input frequency: 48–63 Hz * Output frequency: 0–300 Hz * Protection class: IP54 * Short-circuit withstand rating: 50 kA * ABB NDCU-11 Drive Control Unit Condition: Used industrial equipment. The frequency converter is installed in a complete electrical cabinet, including control components and operator panel. The cabinet shows normal signs of previous industrial use. Operational condition has not been independently tested. Delivery: * Sold as pictured * Available from stock * Located in Rotterdam, Netherlands Chedpfxe Ahd Ums Aatod * Worldwide shipping can be arranged * EXW Rotterdam Please contact us for further information or additional photographs.

Condition: new, I am offering for sale an original, high-voltage traction inverter by Bosch, intended for Volkswagen AG, with part number 95C 907 123 EM27. This is a development component (ETK – Entwicklungs-Test-Komponente) used during research and development work on electric drive systems. The unit comes directly from a Bosch/VW development project and is housed in its original Bosch transport case with foam padding. The package also includes the original transport documentation and high-voltage test and inspection reports, confirming that quality control has been carried out. The inverter is responsible for converting direct current from the high-voltage battery into three-phase alternating current to power the electric motor. It is one of the key components of an electric vehicle’s drive system. Technical specifications: Manufacturer: Bosch Project customer: Volkswagen AG OEM number: 95C 907 123 Version: 95C 907 123 EM27 Bosch number: 0437.B00.0LV-01 Development version: C1-Muster 600A ETK Country of manufacture: Germany Included in the set: Chsdpsz Snd Sjfx Aatjd Bosch high-voltage inverter Original Bosch transport case Foam transport protection Bosch transport documentation Test and quality control reports Condition: 100% technically functional. Very good visual condition. Complete with original documentation and transport case. Sold exactly as shown in the pictures.

Condition: good (used), Schuma Drive Conveyor Belts 37x310cm Made in Germany 380V Power Supply 100% functional, in very good condition. Dimensions: 37x310cm, 40x300cm (total width). Price is for two units. Csdpfx Aaez R In Tjtehd

Condition: like new (used), Year of construction: 2015, functionality: fully functional, overall weight: 450 kg, Alba Drive EBUDAH 001 Function of the machine: during the production generated glass waste can you cutting safe and free from accidents, the waste can be collect in the under located - with forklift movable - emptying container. Chodpfx Asd Nfb Usatjd Size of workplace Length: 3500 mm Height: 1800 mm Width: 3000 mm Electric demand: 2,7 KW Supply voltage: 3x400 V Phase number: 3 The main components of the machine: - breaking unit - loading-tilting table - passive accident protection fence - control cabinet with power disconnect swith - air preparation - keypad unit If you need more information, We're here to help! Please contact us on the contact form or call us!

Condition: used, power: 419 kW (569.68 HP), axle configuration: 6x6, color: green, driver cabin: sleeper cab, gearing type: automatic, emission class: euro6, loading space length: 67,500 mm, Equipment: ABS, EBS, air conditioning, - Brake system Cjdpfoyfu Rmjx Aatohd Iveco X-Way AS300X57 Z/P HR ON+ Short Timber Truck, axle configuration 6X4 (with hydraulically driven front axle 6x6), tandem medium drive axle (HR), disc brakes, cab version Active Space, large driver's cab, rear air suspension, 12-speed automated HiTroniX transmission, engine 570 C13 Cursor 13 570 HP Euro VI, wheelbase 4,800 mm, AS cab with high roof, roof insulation for cab, electrically operated lifting roof transparent for MLL high roof, air suspension for cab, fog lights, front halogen headlights, electrically adjustable and heated mirrors, hybrid bumper, front underrun protection, static passenger seat, one-piece lower bed, double thermo insulated box, digital tachograph 4.0, electronic immobilizer and 2nd vehicle key, luxury driver's seat air-sprung, heated, 4-way adjustable, lumbar and headrest with integrated 3-point seat belt, 2 reinforced anti-roll bars on rear axle, designed for moderate climates, exhaust outlet to the left, 170 Ah batteries, horizontal batteries on frame, rear suspension without spacers, generator 2,160 watts (24 volts x 90 amps), 2-cylinder air compressor 630 cc, rear shock absorbers, trailer socket for 24-volt operation, 15-pin, rear axle ratio: 4.23, heated fuel prefilter with separator, adaptive cruise control (ACC), ECO-Switch to switch between Power and Eco mode to optimize Total Cost of Ownership (TCO) by fuel-optimized engine and transmission settings, driving style analysis (DSE), transmission software eco-roll freewheeling function, VDI interface (Vehicle-Data-Interface) for telematics services (FMS) version 3.0, preparation for toll system (OBU), preparation for telematics system (telematics box), hill start assist (Hill Holder), electronic stability program (ESP), lane departure warning system (LDWS), emergency braking assistant, HI-TRACTION, rocking mode (free swing mode), left and right luggage compartments, 15m tire inflation hose, headlamp protection grilles, fully automatic air conditioning, leather multifunction steering wheel, sun roller blind, auxiliary heater diesel/water 4KW, front axle 8,000 kg / 1st rear axle 10,500 kg / 2nd rear axle 10,500 kg, spare wheel, reinforced front anti-roll bar, reinforced parabolic spring on front axle, AdBlue tank 80 liters, 50 mm 190 kN Ringfeder trailer coupling, fuel tank 550 liters, CAN bus interface CAN-OPEN for body control, infotainment system incl. navigation, axle load indicator, holding effect of parking brake on front axle, LED tail lights, retarder/intarder for ZF transmission, side marker lights, tires 385/65 R22.5 - 315/80 R22.5, bumper painted in cab color, aluminum air tanks, horn behind bumper, transparent sun visor. SCHEMEL–SHORT TIMBER BODY Crane: Palfinger-EPSILON loading crane Y_CRANE_ON_2 M 12 Z91 - Fully hydraulic timber loading crane Manufacturer: EBERT Dimensions: approx. 6,750 mm between bulkhead and crane - 4 ExTe bolsters D5 – adjustable with clamp fastener and lashing ratchets or support for load securing - with 8 ExTe stakes D5 – telescopic - with special Z-profile subframe 200 mm high, closed with checker plate in the center of the frame - Bulkhead welded construction with internal special aluminum profiles approx. 2,600 mm high - 4 x ¼ mudguards...

Condition: used, Year of construction: 2018, functionality: fully functional, Panel saw, Altendorf F45 EVO Drive, with accessories Year of manufacture: 2018 From an insolvency, therefore no further technical data available. Please submit a bid. Location: Freising Chjdpfxe Aaz Rrj Aatjd Inspection is welcome. Sale to the highest bidder. There are other used machines available. Simply contact us.

Year of construction: 2025, operating hours: 5 h, condition: like new (used), functionality: fully functional, Equipment: CE marking, The Toro TX1000 with the Rhino Drive Master is a compact yet powerful mini-skid steer with an attachment designed for quickly and precisely driving posts and pipes into the ground. Work faster and significantly safer than with a manual post driver, sledgehammer, or loader. Level the mast, position the machine, and effortlessly drive an entire fence line into the ground. Key Features & Benefits: The best and most effective combination for driving kilometers of posts. Powerful & Controlled Performance Long-stroke piston for better energy transfer and reduced recoil. Control valve that reduces hydraulic peak pressure. Between 700 and 1200 strokes per minute with a striking force of 203 Joules. Flexible Positioning Adjustable mast: 7° away from the operator, 15° towards the operator – ideal for precise alignment. Mounting from either side – ideal when only one side of the terrain is accessible. Cjdpfjz Irm Tex Aatjhd Compact & Compatible Ideally used in combination with other mini-skid attachments for efficient site preparation. Versatile Use Suitable for steel and wood round, square, and rectangular posts up to ø150mm outer diameter and 3 meters long. Oil pressure: 20 - 30 LPM at 70-140 bar The Drive Master is available for sale with or without the Toro skid steer loader. The combination is also available separately. The price listed in the advertisement includes the Toro TX 1000 with the Rhino Drive Master.

Condition: used, SHI Machines Type: BlueBox As good as new, with only 250 operating hours! Technical data: Chjdpfx Aey Tg R Noatjd Power: 120 kW Torque: up to 470 Nm Speed: up to 6,000 rpm Operation: Four-quadrant operation Safety package: Bulletproof cover & data filter for "Go" signal line Dimensions: approx. 2800 × 1600 × 1300 mm Accessories, etc.: 1 clutch 120 - steel, incl. adapter Clutch size: 100 Max. speed: 7,300 RPM Max. torque: 1,000 Nm 1x adapter 1x clutch steel size 100 1x adapter 2 ø40 1x adapter 2 ø50 1x adapter 2 ø60 1x clamping device ø40 1x clamping device ø50 1x clamping device ø60 Adapter mounting tool Clutch 120 - CFRP, incl. adapter Max. speed: 8,500 RPM Max. torque: 720 Nm Adapter mounting tool CISPR 25 test table made of wood on wheels for EMC BlueBox 120, size 2500 x 1000 x 900 mm Loadable up to max. 500 kg, incl. 2 mm hot-dip galvanized ground plane Payload: up to 1,400 kg Weight: approx. 2,500 kg Operating voltage 400 V, 250 A Control voltage 24 V Condition: used Scope of delivery: (See picture) (Changes and errors in the technical data are subject to change!) We will be happy to answer any further questions you may have by telephone.

Condition: new, working width: 610 mm, area performance: 2,745 m²/h, overall weight: 208 kg, warranty duration: 12 months, water tank capacity: 55 l, I-DRIVE 65 PROFESSIONAL FLOOR SCRUBBERS - 2745m²/h TECHNICAL DATA: Model: I-Drive 65 Type: Compact Scrubber Series: Professional Condition: NEW Wheel Drive: Yes Battery Charger Included: Yes Power Supply: Battery Battery Type: 6 i-power 14 Batteries Number of Brushes Included (pcs): 2 Brush Working Width (mm): 610 Squeegee Working Width (mm): 790 Water Tank: Clean / Dirty (l): 55 / 55 Theoretical Area Performance (m²/h): 2745 Weight (kg): 208 I-MOP LITE PROFESSIONAL FLOOR SCRUBBERS FLOORS - 1400m²/h TECHNICAL DATA: Model: I-Mop Lite Type: Compact scrubber Series: Professional Condition: NEW Charger included: Yes Power supply: battery Battery type: i-power 12: 18 V, 12 Ah Number of brushes included (pcs): 2 Brush working width (mm): 370 Squeegee working width (mm): 370 Chjdpfszkr Dtjx Aatod Water tank: clean / dirty (l): 3 / 3 Theoretical surface efficiency (m²/h): 1400 Weight (kg): 16.8 WHY CHOOSE THE I-DRIVE 65 + I-MOP LITE SCRUBBERS The combination of the I-Drive 65 and the I-Mop Lite is a concept developed by I-Team. A 2-in-1 solution – an efficient ride-on scrubber for large areas with the ability to immediately use the compact I-Mop for thorough cleaning in areas inaccessible with a traditional machine. This allows a single operator to thoroughly clean the entire facility without having to change equipment. One machine for multiple surfaces – the I-Drive 65 effectively cleans large, open spaces such as halls, warehouses, shopping malls, and airports. When narrow passages, corners, or under furniture need cleaning, the operator simply removes the I-Mop Lite from the rear handle and continues working without changing positions. ADVANTAGES OF THE I-DRIVE 65 Easy to use - Clear icons and a simple control panel. One-button activation of the brushes and suction system. Automatic fill system - Stops at the fill line, preventing water from splashing or dripping into the battery compartments. Hidden safe - For storing a wallet or phone. Adjustable foot pedal - Easily adjust settings to suit operator preferences. Clear front view while driving. Easy squeegee removal with the push of a button. The ramp can be quickly assembled for loading and unloading. I-MOP LITE BENEFITS Easy to use - Only 4 buttons, no training required. Super lightweight - Improved ergonomics and increased job satisfaction for cleaners. Microban® antibacterial tank - Prevents bacterial growth for long-lasting hygiene and protection. No trip hazard - Operates on portable lithium batteries instead of a long cord. Brushless motor - Low noise and longer runtime. Efficient cleaning of all hard floor surfaces - 500 RPM high-speed brushes.

Condition: used, Year of construction: 2020, functionality: fully functional, overall weight: 2,041 kg, total length: 2,300 mm, total width: 1,380 mm, total height: 1,950 mm, power: 75 kW (101.97 HP), volume flow: 851 m³/h, pressure (min.): 5 bar, pressure (max.): 7 bar, ambient temperature (min.): 5 °C, ambient temperature (max.): 40 °C, noise level: 74 dB, protection type (IP code): IP54, Equipment: documentation/manual, refrigerant dryer, type plate available, For sale is a highly efficient, frequency-controlled screw compressor from the top-of-the-line range of the German manufacturer ALMiG, type V-DRIVE 75 (PLUS O version including heat recovery), first purchased at the end of 2020. This unit impresses with minimal energy costs thanks to its loss-free 1:1 direct drive, stepless speed control and integrated heat recovery (WRG). Technical data: Manufacturer: ALMiG Kompressoren GmbH Type: V-DRIVE 75 PLUS O including WRG Drive power: 75 kW Maximum pressure: 7 bar Volume flow: up to 14.18 m³/min (approx. 851 m³/h) Voltage: 400 V / 50 Hz Control system: ALMiG Aircontrol Premium (including RS 485, operating and fault messages) Dimensions (L x W x H): 2,300 x 1,380 x 1,950 mm Weight: 2,041 kg Equipment & special features: Installation in a special container: - Weather-protected outdoor installation directly on the company premises. - Generous, double-wing access doors for unrestricted maintenance access. - Integrated window with exterior roller shutter. - Standardized container corner fittings (ISO corners) for crane or lifting gear handling are available. - Integrated heat recovery (WRG): For direct use of waste heat for heating purposes or hot water. - Integrated refrigeration dryer (PLUS) & filter system (O): High compressed air quality directly from the compressor. - SCD frequency inverter & asynchronous motor (IP55): Stepless adaptation to demand, soft start without peak loads. - Sound-insulated: Extremely quiet operation thanks to optimized encapsulation and vibration-isolated installation. - Documentation: Complete documentation / manual available. Important sales & collection conditions: - Delivery condition: Sale is ex works (FCA). - Loading: No loading facilities available on site! Chedpfx Aj Ahppdjatsd - The removal must be organized by the buyer using a truck with a loading crane or a separate mobile crane (lifting equipment suitable for ISO container corners required). - The sale is made excluding any liability for defects and warranty. Subject to prior sale and errors.

Condition: like new (used), Year of construction: 2022, operating hours: 11,500 h, INVERTER COMPRESSOR GA 75 VSD, IN LIKE-NEW CONDITION (WE ARE AN OFFICIAL DEALER). NEW UNIT LIST PRICE: EUR 96,968. MAIN FEATURES: MAXIMUM PRESSURE: 13 BAR Chedpfx Aezdf U Tsated POWER: 75 kW / 100 HP FLOW RATE: 13,500 LITERS/MINUTE

Condition: good (used), overall weight: 180 kg, total height: 1,650 mm, input voltage: 400 V, type of input current: three-phase, input frequency: 50 Hz, BB Stromberg AC Drive SAFUI 400F415 ABB SAFUI-400F-415 DISCONTINUED BY MANUFACTURER AC DRIVE 380/415VAC 50/60HZ 315/400KVA Chjdpfx Aaoxlr Arjtjd height:165 length:530 width:450 weight: ca170 DISCONTINUED BY MANUFACTURER

Condition: new, Two-speed (Dahlander connection) three-phase electric motor + cycloidal gear motor (gear drive mechanism), characterized by extremely high overload resistance and durability. Code Afd Dfspfx Aatshd

Condition: new, Gear motor 5.5 kW, operating on a 400 V three-phase network with a high-efficiency IE3 class motor. Reduces the motor speed from 1460 to 95 rpm. Chedpfj Afdx Ajx Aatod

Condition: like new (used), Year of construction: 2019, Sundyne HMD Kontro 1.5x1x6 Sealless Magnetic Drive Centrifugal Pump Sundyne HMD Kontro magnetic-drive centrifugal pump for industrial process and fluid-transfer applications. The sealless magnetic-drive design is intended for applications where minimising the risk of process-fluid leakage is important. Technical details - Manufacturer: Sundyne HMD Kontro - Type: Magnetic-drive centrifugal pump - Size: 1.5 × 1 × 6 - Material of construction: 316L - Condition: Brand New Suitable for consideration by chemical, pharmaceutical and general process industries, subject to the specific liquid, temperature, pressure and materials requirements. Sale details - Equipment available from Ireland Code Ad N Awopfx Aatshd - International enquiries welcome - Price: On request - Inspection and additional photographs available on request Please enquire for the full specification, condition report and quotation.

Condition: ready for operation (used), Year of construction: 2017, functionality: fully functional, shelf height: 7,200 mm, load capacity per storage section: 2,000 kg, TECHNICAL DETAILS General Information Manufacturer: BÖCKELT Model: TOWER Year of Construction: 2017 Racking System Number of Racking Bays: 41 Racking Height: 7.20 m Maximum Bay Load: 38 t Maximum Load per Level: 2,000 kg Shelves and Storage Dimensions Shelf External Dimensions: 3,340 × 1,600 × 90 mm Additional Loading Height: 60 mm or 160 mm Drawer Internal Dimensions: for panel format 3,000 × 1,500 mm Maximum Weight of Loaded Shelf: 2,300 kg Automated Narrow Aisle Trucks Number: 2 Manufacturer/Model: MLR Mayesto 2.3 Design: Automated narrow aisle trucks with reinforced lifting mast Load Capacity per Vehicle: 2,300 kg up to 4,500 mm lifting height Residual Load Capacity per Vehicle: 2,000 kg up to 7,500 mm lifting height Truck Load Capacity: 2,000 kg at 7,500 mm lifting height per vehicle Travel Speeds Forward/Reverse Travel: max. 1.6 m/s Curve Travel: 0.3 m/s Positioning Travel: 0.1 m/s Battery and Charging Technology Chsdps Aay Dwjfx Aated Battery Voltage: 80 V Battery Capacity: 930 Ah Charger: on-board Automatic Recharge: via sliding conductors in 3 horizontal aisles Safety and Detection Technology Laser Scanner: SICK, front and rear Software and Control System Control System: MLR LogOS-FTS Operation: fully automatic Visualization: graphic and tabular EQUIPMENT Complete software for fully automatic system operation 41 racking bays 2 automated MLR Mayesto 2.3 narrow aisle trucks Reinforced lifting masts Telescopic forks that can extend on both sides Multi-level telescopic table SICK laser scanners, front and rear On-board charger Automatic recharge via sliding conductors Shelves with aluminum panels Transport order management Vehicle dispatch Storage location management User management Error and signal management Statistics Energy monitoring

Condition: excellent (used), Year of construction: 2013, ABB IRC5 Controller, 20% discount when ordering more than one unit. DEVELOPMENT OF GSG ROBOTICS Chjdpfx Asz Tafcjatjd GSG Robotics GmbH, founded in 2005 in Gütersloh, has been based in Marl since 2015, with a large service area for robot maintenance and repair. Over the years, we have developed into a comprehensive partner for all matters relating to industrial robots and automation technology. We are a full-service provider for the two well-known robot manufacturers, ABB and Fanuc.

Condition: used, Year of construction: 2006, functionality: fully functional, Equipment: rotational speed infinitely variable, Manufacturer: 600 Lathes Model: Harrison V350 Centre Height: 170 mm Swing over Bed: 350 mm Swing over Cross Slide: 196 mm Swing in Gap: 535 mm Width in front of Face Plate: 165 mm Distance between Centres: 650 mm Spindle Speeds (stepless via potentiometer across 3 ranges, with digital readout): 15 - 340 rpm 45 - 1010 rpm 150 - 3250 rpm Chsdpfx Aexcuuljatjd Spindle Mount (Camlock): D1-4 Spindle Bore: 54 mm Spindle Motor: 7.5 kW Carriage Guideway Width: 318 mm Cross Slide Travel: 250 mm Top Slide Travel: 140 mm Tailstock Quill Travel: 140 mm Tailstock Quill Taper: MT4 Quill Diameter: 63 mm Metric Version Machine Threads: Metric: 0.2 - 14 mm (51) Imperial TPI: 2 - 56 (56) Module: 0.2 - 3.5 (20) Diametral Pitch: 8 - 56 (20) Drive Power: 7.5 kW Equipment: 3-Axis Digital Readout 3-jaw Chuck Röhm D:200 mm 4-jaw Chuck D:160 mm Collet Chuck System Steady Rest 4-position Quick Change Toolpost Live Centre Chuck Guard Additional Chip Shield on Carriage Coolant System Rear Splash Guard Machine Documentation incl. Schematics Dimensions: Floor to Spindle Centre: 1050 mm Overall Length: 1900 mm Overall Width: 1100 mm Overall Height: 1300 mm Weight: 1350 kg The machine can be demonstrated under power on site by arrangement. All details without guarantee. Errors and prior sale reserved.

Condition: used, Drive motor: BAUMÜLLER Main spindle motor: DC shunt motor, servo motor Permanent magnet DC servo motor, type GNAF 112 LV Serial no.: 843016 Year of manufacture: approx. 1985 Rated power: 20 kW Operating voltage: 400 VDC Rated current: 56 A Maximum speed: 3000 rpm Excitation voltage: 310 VDC Excitation current: 1.8 A Tacho: Baumüller, type GHT 68/22 Tacho voltage: 20 V / 1000 rpm Tacho current: 5 mA Max. 8000 rpm - Flange connection for cooling fan Cedpo Ah Ignsfx Aatshd Shaft diameter: 28 mm (shaft with 8 mm keyway) Shaft length: approx. 55 mm (shaft projection from centering edge) Centering diameter: 180 mm, 4 mm height Bolt circle diameter: 215 mm, 4x 14 mm holes Overall length: 620 mm (without shaft and centering flange) Overall dimensions L x W x H: 700 x 225 x 225 mm Weight: 100 kg Good condition Suitable cooling fan available in the shop under stock number 55670.

Condition: good (used), Year of construction: 2022, Pallet racking system, Still, approx. 5,625 storage locations, 1 ton/pallet - used: Price ex works: €85,000 (net), disassembled, packaged, and loaded! Manufacturer: Still Type: Pallet racking system Csdpfx Aj Agu H Ioatehd Year of manufacture: 2022 Support type: P3 Load handling equipment, pallet racking, Euro pallet: B1: 800 mm / L1: 1,200 mm / H1: 1600 mm Qmax: 1,000 kg Clear width between the outer support frames: 1.25m / inner 1m Block 1: Depth: approx. 7,250 mm Height: 9,050 mm (top of brace 9,115 mm) Width: 6,300 mm 4 racking aisles 5 storage levels (incl. floor) Shelf height: approx. 1.70 m Storage locations: 9 pallets in a row x 4 aisles x 5 levels: 180 pallets Block 2 + 5: Depth: approx. 7,250 mm Height: 9,050 mm (top of brace 9,115 mm) Width: 47,340 mm 31 racking aisles 5 storage levels (incl. floor) Shelf height: approx. 1.70 m Storage locations: 9 pallets in a row x 31 aisles x 5 levels: 1,395 pallets per block x 2 = 2,790 pallet locations Block 3 + 6: Depth: approx. 7,250 mm Height: 9,050 mm (top of brace 9,115 mm) Width: 42,780 mm 28 racking aisles 5 storage levels (incl. floor) Shelf height: approx. 1.70 m Storage locations: 9 pallets in a row x 28 aisles x 5 levels: 1,260 pallets per block x 2 = 2,520 pallet locations Block 4 Depth: approx. 7,250 mm Height: 9,050 mm (top of brace 9,115 mm) Width: 42,780 mm 3 racking aisles 5 storage levels (incl. floor) Shelf height: approx. 1.70 m Storage locations: 9 pallets in a row x 3 aisles x 5 levels: 135 pallets per block Condition: good Available: immediately (still needs to be disassembled) Location: 47533 Kleve More photos to follow!

Condition: like new (used), Year of construction: 2021, Rotary welding drive for sale Sale only within EU member states! No private sales. MAE can be inspected upon request. All warranty rights are excluded. Chedpfoz Rx N Uex Aatsd We assume no liability for the accuracy of the technical data and year of construction, for the completeness of accessories and tool equipment, or for compliance with all safety and environmental protection requirements mentioned in the accident prevention regulations.

Condition: good (used), Year of construction: 2014, Direct Drive Straight Machine APL (Fully-Automated Plate Changing ) InlineColorPilot IPC (Graphometronic): Automatic inline color measuring and controlling system PressPilot Center IntegrationPilot plus Non-stop Antistatic Device on Feeder (Eltex) Antistatic Device on Delivery (Eltex) Ink unit Temperature Control Technotrans (Watercooled) Automatic Blanket Washing Device with Blanket (Elettra) Automatic Ink Roller Washing Device Impression Cylinder Washing Device with Blanket Airglide Delivery ROLAND SelectDryer IR/TL Dryer - High Performance Performance Package Coating System Tresu with Doctor Chamber Blade Powder Max smart: Powder Sprayer QuickChange Air: Job specific air settings for all relevant consumption points via the control console QuickChange Clamp: Multi-purpose speed clamp for the coating form cylinder QuickChange Color Plus: Color adjustment system with computer-assisted optimization of the ink slide presets QuickChange Transferter Chodpfx Aasxiw Tqstsd QuickStart: re-start with fewer waste sheets Premium Speed: 18.000 s/h max. LCS: Low Coverage Stabilisation of Inks Central Air Cabinet: SelectAirStation

Condition: excellent (used), Year of construction: 2023, operating hours: 1,087 h, functionality: fully functional, machine/vehicle number: API474668, power: 26 kW (35.35 HP), Atlas Copco GA 26 VSD FF Rotary Screw Compressor Year 2023 For sale is a highly efficient variable speed driven premium screw compressor of the latest generation: Atlas Copco GA 26 VSDs FF with integrated refrigerant dryer (Full Feature). The machine was manufactured in 2023 and has an extremely low operating history of just 1087 running hours. Technically the compressor is in absolute 1A top condition and ready for immediate operation. Thanks to the state of the art VSDs variable speed technology the unit adapts flexibly and precisely to your actual compressed air demand. This ensures maximum energy efficiency and drastically reduces operating costs. With the integrated Full Feature equipment including a built in refrigerant dryer the system delivers dry and clean compressed air directly requiring a minimal footprint. Condition of the machine: Cedoz Sqa Uspfx Aatjhd Technical: 1A Top Condition. Runs perfectly, reliably, and without any maintenance backlog. Optical: The housing shows some cosmetic dents and scratches (see photos). These are purely transport related cosmetic imperfections. The flawless function, safety, and lifespan of the unit are in no way affected. Technical Data: Manufacturer: Atlas Copco Model: GA 26 VSDs FF with integrated refrigerant dryer Serial Number: API474688 Year of Manufacture: 2023 Operating Hours: 1087 h Motor Power: 26 kW (35 hp) Motor Speed: 5050 rpm Maximum Working Pressure: 10.25 bar Free Air Delivery at maximum pressure: 5.8 m3/min (96.5 l/s) Regulating Range Free Air Delivery: continuously variable from 0.95 to 5.88 m3/min Noise Level: 66 dB(A) Dimensions: Length 1330 mm, Width 870 mm, Height 1725 mm Weight: 604 kg Electrical Connection: 400 V, 50 Hz, 3 Phases Country of Origin: Belgium