Used Spur Gear for sale (7,702)

Year of construction: 2001, condition: good (used), Electric motor Manufacturer Danfoss Year of construction 2001 Type WF-DA90LT-H FCM 315 Type 12 Motor number J369521 Power 1.5 kW Speed 1,500 rpm Speed control range 150 to 3,000 rpm Shaft diameter .... mm Diameter of impeller 40 mm Shaft length mm Shaft diameter 140 mm Bolt circle of clamping screws 110 mm Control unit Weight 22 kg Dimensions 340 x 240 x 180 mm Dedpfx Ashgbtvec Njkh several motors available

Condition: used, Permanent magnet brushless servo motor SIEMENS with ALPHA helical gearbox Servo drive, geared motor, servo gear unit Type: 1FT6105-8SF71-3EG1 Serial no.: YF P921 8717 03 001 Year of manufacture: 2002 Rated torque = M₀: 54/65 Nm Rated current = I₀: 36/45 A Max. speed = nₘₐₓ: 4500 rpm ALPHA helical gearbox Type: SP 210-MF2-20 -021-000 Shaft diameter: 75 mm Dodpjktdufsfx Ac Nskh Shaft end length: 105 mm Centering diameter: 180 mm Centering diameter length: 35 mm Pitch circle diameter: 250 mm / 4 x 17 mm holes Housing dimensions (L/W/H): 725 x 225 x 225 mm Weight: approx. 120 kg Good condition Removed from a fully functional special-purpose machine, tested prior to removal.

Condition: ready for operation (used), Components to build a very large energy waterwheel. Gearbox: Shaft-mounted gearbox Flender SFO 500 Number of gear stages: 4 Transmission ratio: 185,63 : 1 Transmittable torque: 131.300 Nm Speed n1 max.: 1485 rpm Speed n2: 8 rpm Shaft diameter D1: 80 mm Shaft diameter D2: 220 mm 3500 kg without electric motor Dimensions: Length: 2000mm width: 800 mm height: 1000 mm Dksdpfx Ajh Rrtnec Noh To the shaft / tube Shaft diameter: 560 mm Tube wall thickness: 35 mm Bearing distance: 10000 mm Shaft can be shortened as desired due to the screwed hubs. Welding is possible without problems on the tube because it has a wall thickness of 35 mm.

Year of construction: 2021, condition: ready for operation (used), Lifting capacity: 52t, drive shaft diameter of the hollow shaft: 245mm, brake shaft dimensions: 100x190mm, drive shaft dimensions: 80x140mm, ambient temperature: -15 to 45°C, center distance: 1105mm, rated power: 275kW. The gear is still unused. An on-site inspection is possible. Dsdpfx Acew Tc Sne Njkh

Condition: excellent (used), functionality: fully functional, Year of construction: 2002, operating hours: 48,651 h, Mazak Space Gear-510 MKII 2.5 kW Year of manufacture December 2002 - after renovation!!! Very good condition! Meter reading 48651 hours Operating system Fanuc L-64 Djdpfjwqr Tdsx Ac Nekh

Condition: excellent (used), functionality: fully functional, Year of construction: 2007, operating hours: 41,417 h, Mazak Hyper Gear 510 4.0 kW Year of production February 2007 Meter reading 41417 hours MAZATROL operating system very good condition Technical data of the MAZAK HYPER GEAR 510 laser cutter - laser power: 4 kW - feeds in the X/Y/Z axes: 3070/1545/100 mm - dimensions of the work table (length x width): 3000 x 1500 mm Dkedpfxjwqr Twj Ac Nsh - maximum weight of the workpiece: 930 kg - maximum dimensions of the workpiece (length x width x height): 3050 x 1525 x 25 mm - laser type: CO2

Condition: ready for operation (used), Year of construction: 2001, functionality: fully functional, grinding wheel diameter: 200 mm, workpiece length (max.): 200 mm, TECHNICAL DETAILS Grinding wheel diameter: 100–200 mm Maximum workpiece length: 200 mm MACHINE DETAILS Control: Siemens 840D or equivalent CNC axes: 3–5 axes Drive power: 5–10 kW Coolant tank: 100–200 litres Dkedpeya Dy Hofx Ac Njh EQUIPMENT Coolant filtration system Universal applicability for different tool types and geometries High flexibility through CNC programming and adaptable clamping devices Process reliability thanks to integrated cooling and filtration system Easy maintenance due to modular design and central supply units

Condition: good (used), adjustable gearbox, variable speed gearbox, spindle variable speed gearbox, DISCO variable speed gearbox Dedpfxot Acx Sj Ac Nokh -Manufacturer: Stöber, variable speed gear without variable drive -Type: R76-1052-750-4 -Speed range: 68-340 rpm see photo type plate -Dimensions: 435/325/H425 mm -Weight: 84.7 kg

Condition: excellent (used), Year of construction: 2020, Servo motor, electric motor, DC motor, servo geared motor, synchronous motor -Manufacturer: Siemens Wittenstein, servo geared motor -Synchronous motor: Siemens type 1FK7101-2AF71-1RG0 -Voltage: 278 V -Gearbox: Wittenstein SP 140S-MC1-10 -1K1-2K i= 10 Dodexr A Nispfx Ac Nekh -Shaft: Ø 40 x 80 mm -Number: 2x geared motors available -Price: per piece -Dimensions: 490/190/H260 mm -Weight: 41.2 kg/pc.

Condition: good (used), Year of construction: 2021, Gearboxes, spur gears, bevel gears, worm gears -Manufacturer: Nord, Gearbox type SK 1SI40F -Translation: i = 15.00 Dsdpeyh E E Rjfx Ac Nokh -Hollow shaft: Ø 18 x 83 mm -M2 max: 49 Nm -Dimensions: 150/120/H150 mm -Weight: 2.7 kg

Condition: used, Year of construction: 1990, total length: 5,900 mm, total height: 2,000 mm, total width: 1,300 mm, Empty weight: 7.500 kg Price: On request Center-height: 250mm Table-length: 2300mm Travel grinding-spindel: 200mm Gear diameter: 300 mm Module range: 0.5 mm – 8 mm Helix angle: ±35° Max. workpiece weight: 100 kg Dksdpfjxz Du Sox Ac Njh - Year: 1990 - Documentation available: No - CE certificate present: No - Serial number: 018.0402 - Control type: Optronic CNC D140 - Control: CNC - Transport dimensions: 5900mm x 1300mm x 2000mm (l x w x h) - Transport weight [kg]: 7500kg - Transport packages [pcs.]: 5 Financial information VAT: The price shown is exclusive of VAT VAT/margin: VAT deductible for entrepreneurs Delivery and trade-in always possible for everything in the industrial sectors Bram van Summeren

Condition: good (used), DC motor, servo motor, geared motor, electric motor, DC geared motor, DC shunt-wound geared motor -Manufacturer of gearbox: Nord., type 1SI50F F i =15 -Speed: 200 rpm Djdeyh Ai Tepfx Ac Njkh -Engine manufacturer: B&R Type 8LVA23.R0030D100-0 -Voltage: 57 V -Shaft: Ø 25 x 50 mm -Dimensions: 275/200/H170 mm -Weight: 7.5 kg

Condition: excellent (used), Gear motor, electric motor, electric gear motor, worm gear motor, parallel shaft gear motor -Condition: Gear motor is unused -Manufacturer: SEW-Eurodrive, gear motor with brake, parallel shaft gear unit series F -Type: DFV132S4BMG/HF/TF -Speed: 70 rpm -Power: 5.5 kW -Protection class: IP54 -Hollow shaft: Ø 65 x 280 mm Dsdovvbmfspfx Ac Nskh -Brake: 55 Nm -Quantity: 1 piece available -Dimensions: 670/320/H540 mm -Weight: 146 kg/piece

Condition: good (used), dividing head, dividing head, gear, gears lathe, spur gears, spur gear -Gears: 12 pieces -Teeth: 27 to 120 Z see photo parts list -Tooth width: 15 mm -Shaft mount: Ø 18 mm -Dimensions: see photo parts list -Shipping/Price: complete -Transport dimensions: Ø 153 x 180 mm Dkedpjx R S Axsfx Ac Nsh -Weight: 5.2 kg/total

Condition: good (used), Year of construction: 2020, Servo motor, electric motor, DC motor, stepper motor, compact asynchronous motor Dkedpoxw Tvwefx Ac Neh -Manufacturer: SEW Eurodrive, DC geared motor type ECG-A2M-09-A-K0 -Voltage: 24V -Translation: 9 -Shaft: Ø 16 x 25 mm -Technical data: see photo of the nameplate -Quantity: 37x motors available -Price: per piece -Dimensions: 230/50/H50 mm -Weight: 1.3 kg/pc.

Condition: refurbished (used), Overhauled 3-stage bevel-helical gearbox FLENDER, Model: KZA 360, P = 194 kW, n1 = 1,500 rpm, n2 = 60 rpm Dedsyhngtspfx Ac Nekh

Condition: good (used), ⚙️ Mikron Gear Hobbing Machine Type 132-02 (M23) – Mikron is renowned for its robust construction and long-lasting performance in gear hobbing applications, making it an excellent solution for cutting spur gears, helical gears, and splines with reliable precision. Condition Used State Good Maximum diameter 100mm (4") Maximum length 100mm (4") Number of teeth 6-400 Maximum pitch in steel 15 D.P. 12 table revolutions Geometrically calibrated between 200 and 2,400 rpm Feed Horizontal or plunge cut Main motor 1.5 HP Coolant pump motor 0.1 HP Hydraulic system motor 0.1 HP Dimensions 1120x1120x1680mm Machine weight 500kg Djdpfx Acoxlabcs Nokh

Condition: excellent (used), max. wheel diameter 600 mm gear width 250 mm max. module 10 min. module 1 Dsdpfxox N Nc Ts Ac Nekh weight of the machine ca. 0,9 t dimensions of the machine ca. 1,8 x 1,4 x 1,4 m

Condition: excellent (used), Year of construction: 2009, Machine-Details: Stock-No. 1022-2352 Type of machine Gear Hobbing Machine - Horizontal Make MONNIER & ZAHNER Type KOEPFER MZ 120 Year of manufacture 2009 Type of control CNC Storage location Monheim (Germany) Country of origin Switzerland Delivery time Immediately Freight basis Ex warehouse, loaded on truck Technical details: max. wheel diameter 2-45 mm gear width 250 mm max. module 1,5 mm min. module 0,5 mm Control Fanuc 18i-MB weight of the machine ca. 2,2 t dimensions of the machine ca. 2100 x 1440 x 1700 m Additional information: The combined CNC gear hobbing and worm milling machine KOEPFER MZ 120 is characterized by its flexible usability and is used in the small module area. Just by swiveling the milling spindle from the horizontal to the vertical position and selecting the corresponding operating mode of the CNC control, the worm milling machine becomes a gear hobbing machine and vice versa. CNC control Fanuc 18i-MB (Dialog/ISO) CNC axes = X-axis plunge axis Z-axis longitudinal axis C-axis workpiece spindle B-axis tool spindle V-axis loader axis longitudinal A-axis swivel axis tool spindle head (included as an option) Y-axis shift axis (included as an option) With the following production programs: Worm milling Hobbing Worm hobbing Bevel gear and spur gear milling Bevel gear hobbing Milling cycles = straight, oblique, crowned toothing, radial, radial-axial, co- and counter-rotating milling, roughing, finishing, worm gears, straight-toothed bevel gears, face gearing (option only in the partial process) Worms Dodsyhc Daopfx Ac Nokh [Equipment] Coolant tank 300 liters KF with LNS Turbo MS 250 Chip conveyor, built in 2021!!! Kraft and Bauer fire extinguishing system Spiral conveyor Machine documentation [Technical data] Workpieces: Workpiece diameter 2-45 mm Max. workpiece length 250 mm Tooth length 150 mm Max. module in steel= 1 mm (gear hobbing) 1.5 mm (worm milling) 0.5 mm (bevel gear hobbing) Tools: Cutter diameter= 16-32 mm (gear hobbing) 40-63 mm (worm milling) Machine: Max. setting angle of milling head= +/- 45° (gear hobbing) +/- 30° (worm milling) Shift travel= 34 mm (manual adjustment) 34 mm (CNC axis) Collet/retraction mandrel W 20 Max. speed of workpiece spindle 770 rpm. Milling spindle drive 0.55 kW Max. milling spindle speed 8000 rpm Axis drives = X-axis (plunging) / travel 80 mm via CNC Z-axis (longitudinal feed) / travel 190 mm via CNC C-axis (workpiece axis) via CNC Rapid traverse = X-axis 6000 mm/min. Z-axis 6000 mm/min. Hydraulic unit 0.37 kW

Condition: good (used), Year of construction: 1975, max. wheel diameter 630 mm gear width 425 mm table hole 125 mm clamping table 550 mm max. module 10 axial-feeds 0,40 - 6,80 mm/U radial feeds 0,10 - 1,76 mm/U dist. cutter spindle - workpiece spindle 50 - 425 mm no. of teeth min. 8 milling cutter dia. x width 192 / 215 mm shifting 200 mm main drive motor 7,5 kW total power requirement 22,5 kVa weight of the machine ca. 8,2 t Machine equipment: - Universal milling head with tangential displacement - Pressure reducing valve for counterholder - Magnetic chip transport --> Working range Largest module to be milled (in steel 600 N/mm²): 10 mm --> Straight gear teeth: --> Largest workpiece diameter: 630 mm --> Largest axial slide travel (Z-axis): 425 mm --> Smallest number of teeth to be milled: 8 --> Dimensions Diameter of workpiece table: 550 mm --> Diameter of table bore: 125 mm --> Diameter of workpiece mandrel: 36 mm --> Largest milling cutter that can be clamped: --> Diameter: 192 mm --> Width: 220 mm --> Diameter of milling cutter mandrels: 32 mm --> Centre distance between milling cutter and workpiece: --> Maximum distance: 425 mm --> Minimum distance: 50 mm --> Drive taper for cutter mandrels: Morse taper 5 --> Maximum cutter displacement: 200 mm --> Speeds and feeds Cutter speeds: 45 - 280 rpm --> Axial feed (Z axis): 0.40 - 6.30 mm/rev --> Radial feed (X axis): 0.10 - 1.60 mm/rev --> Tangential feed (Y axis): 0.14 - 2.24 mm/rev Dsdpew A Am Ssfx Ac Nekh Translated with (free version)

Condition: used, Year of construction: 2004, Technical details: Dkedpfxexc E H Ss Ac Njh max. wheel diameter: 200 mm gear width: 60 mm max. module: 7 weight of the machine ca.: 15 t table diameter: 180 mm table turning speeds: 100 U/min hob turning speeds: 750 U/min Machine in good condition, without feed, without automation Available 24.08.2024 *

Year of construction: 1971, condition: used, Technical details: max. wheel diameter: 300 mm max. module: 5 module min. : 0,5 max. workpiece weight: 60 kg weight of the machine ca.: 4,0 t dimensions of machine: 1800x1850x2500 mm dimensions electric cabinet: Nr. 1: 1930x400x1920 mm dimensions electric cabinet: Nr. 2: 800x230x1950 mm dimensions:: Abluftanlage: 1400x700x560 mm dimension cooling device LxWxH: 1,2 x 1,0 x 0,45 m Dodpfxevc Apbs Ac Nokh Electronically controlled tooth flank grinding machine up to module 5 and a Ø of 240 - 300 mm feed speed per workpiece revolution infinitely variable 0.4 - 3.2 mm max./min. Number of teeth: 130 / 12 max./min. Pressure angle: 30° / 14°30` max./min. Spiral pitch with 24 teeth: 6000 / 200 mm max. tooth helix angle, both sides: 45° Speed of the grinding worm: 1900 rpm without dressing device Equipment: approx. 77x change transmission wheels, pipe extensions and various tools Two of these machines are for sale. Both machines are supplied via two common control cabinets and an exhaust air system. *

Year of construction: 1971, condition: used, Technical details: max. wheel diameter: 300 mm max. module: 5 module min. : 0,5 max. workpiece weight: 60 kg weight of the machine ca.: 4,0 t machine dimensions LxWxH: 1,8 x 1,9 x 2,5 m dimensions electric cabinet LxWxH: Nr. 1: 1,95 x 0,4 x 1,95 m dimensions electric cabinet LxWxH: Nr. 2: 0,8 x 0,23 x 1,95 m Dsdpevc An Djfx Ac Nekh dimensions:: Abluftanlage: 1,4 x 0,7 x 0,55 m Electronically controlled tooth flank grinding machine up to module 5 and a Ø of 240 - 300 mm feed speed per workpiece revolution infinitely variable 0.4 - 3.2 mm max./min. Number of teeth: 130 / 12 max./min. Pressure angle: 30° / 14°30` max./min. Spiral pitch with 24 teeth: 6000 / 200 mm max. tooth helix angle, both sides: 45° Speed of the grinding worm: 1900 rpm without dressing device Equipment: approx. 69x change transmission wheels, pipe extensions and various tools Two of these machines are for sale. Both machines are supplied via two common control cabinets and an exhaust air system. *

Condition: ready for operation (used), Year of construction: 2006, max. wheel diameter 150 mm gear width 100 mm max. module 3 min. module 1 ical angle +/- 45 ° Dodeygm Ruepfx Ac Nekh slide stroke 100 mm number of teeth 5 - 150 clamping length max. 350 mm control Siemens 840 D Powerline rated capacity 38 kVA dimensions of machine 2,45 x 2 x H = 2,5 m weight of the machine ca. 8 t CNC-controlled gear grinding machine. The Siemens CNC control allows the input of all relevant gear data and the setup of the workpiece in dialogue with the control system. The programming language (German/English) is switchable, and a DNC interface is available for data input and output. The machine operates using a continuous gear grinding process with an automatic grinding cycle. The workpiece swivel angle is electronically controlled, quickly and precisely, and hydraulically clamped, resulting in faster setup times and easier part loading. Hydraulic workpiece clamping with external collet and counterpoint in the workpiece slide, complete work area cover with sliding doors, separate switch and control cabinet, separate hydraulic system in the cabin. No associated coolant system is included (central supply). A cooling system with suction belt filter, Hoffmann, model HSF 150 SE/K, yearof manufacture 2007, can be purchased separately from another provider. Siemens control, tank capacity 2800 l, flow rate 100 l/min, 46 kW, weight 4.5 t, dimensions 3.7 x 2.5 x 3.56 m. This is a used machine; therefore, we sell it without any warranty.

Condition: new, Drilling capacity cast iron / steel ----- 35 / 30 mm Tapping capacity cast iron / steel ----- 22 / 20 mm Motor ----- 1.5 kW Speed range ----- 75 ~ 3200 rpm Spindle stroke ----- 130 mm Spindle adaptor ----- MK4 Cross table ----- 600 x 190 mm Foot ----- 650 x 450 mm Dksdpfeq E N Uxex Ac Nsh Diameter T-slots ----- 12 mm Maximum distance spindle - table ----- 610 mm Maximum distance spindle - foot ----- 1180 mm Weight ----- 390 kg INCLUDING * LED work light * Cooling system * Digital depth stop * Tapping function * 2-speed motor 75-3200 rpm * CE plug * Toolbox with various tools