Used Tos Fn 20 for sale (29,650)

Condition: used, machine/vehicle number: 17376, Year of construction: 2022, operating hours: 55 h, load capacity: 2,000 kg, lifting height: 4,476 mm, free lift: 1,560 mm, load center: 600 mm, fuel type: electric, mast type: triplex, construction height: 2,065 mm, battery voltage: 24 V, fork length: 1,150 mm, overall weight: 1,646 kg, enginetype: Electric, manufacturer: Linde Serial Number: P21173L06436 Battery Details: 24V 3PzS 375Ah BJ: 2022 Fsdpfez N Aiijx Al Asgh

Condition: used, machine/vehicle number: 003935, Max Panel Width: 1200 mm Max Panel Length: 40 mm Max feed speed: 60 m/min Operating Units: 3 nr Fgodpfowucknsx Al Aeh

Condition: ready for operation (used), Year of construction: 2022, operating hours: 4,856 h, overall weight: 567 kg, load capacity: 20 kg, arm reach: 3,101 mm, number of axes: 6, This 6-axis KUKA KR 20 R3100 / SEL was manufactured in 2022. It features a payload capacity of 20 kg and a reach of 3,101 mm, making it suitable for material handling and pick & place applications. The robot is equipped with a KUKA Robot Controller and includes a teach panel. If you are looking to get high-quality material handling capabilities, consider the KUKA KR 20 R3100 / SEL robot arm we have for sale. Contact us for further details. Fodpfxjzd Rxpj Al Aegh • Application Type: Material Handling / Pick & Place Robot • Series: IONTEC Series • Controller: KUKA Robot Controller • Optional, not included: teach panel, KR C5 controller, cable set

Condition: used, Year of construction: 2016, Overview Automated 2-vessel steam brewhouse for 20 BBL (2,347 L) batches, built in 2016 by American Beer Equipment (ABE), Lincoln, Nebraska, USA. The package covers the complete hot side: mash/lauter tun, kettle/whirlpool, hot and cold liquor tanks, plate heat exchanger, UL control cabinet with touch-panel HMI, an ATTSU steam generator and a reverse osmosis water treatment unit. Currently installed and in operation. Technical data - Manufacturer: American Beer Equipment (ABE) - Year of manufacture: 2016 - Batch size: 20 BBL (2,347 L) - Mash/lauter tun: 20 BBL (2,347 L), rake drive with 3 HP SEW gear motor - Kettle/whirlpool: 20 BBL (2,347 L) - Hot liquor tank: 30 BBL (3,520 L), steam heated - Cold liquor tank: 2,347 L - Heating: steam (brewhouse and hot liquor tank) - Material: AISI 304 stainless steel, vessels and piping - Connections: 1-1/2" Tri-Clamp sanitary - Pumps: 2 HP stainless sanitary centrifugal pumps, 30 GPM at 15 PSI - Operation: automatic valves, transfers and pumps, controlled from the HMI - Electrical supply: 380 V, 3-phase, 50 Hz, 40 A Scope of Delivery - Mash/lauter tun | ABE | 20 BBL | rakes with SEW gear motor, grist hydrator, wort grant, mash pump | 2016 - Kettle/whirlpool | ABE | 20 BBL | steam heated, brew pump | 2016 - Hot liquor tank | ABE | 30 BBL | 3,520 L, steam heated, HLT pump, liquor blending assembly | 2016 - Cold liquor tank | ABE | 2,347 L | 2016 - Plate heat exchanger | ABE | 20 m² | AISI 304 plates, design temperature 150 °C, rated pressure 116 PSI (8 bar) | 2016 Fsdoz Iypvepfx Al Aegh - Control cabinet | ABE | UL | touch-panel HMI, temperature controllers for mash, kettle and HLT, Delta frequency inverters | 2016 - Steam generator | ATTSU | RL-300/12 | natural gas burner, max. working pressure 12.3 bar, max. temperature 193 °C, 501 L total volume, 3 x 400 V, 1,130 kg empty weight | 2016 - Reverse osmosis unit | with water softener and brine tank - Hard-plumbed AISI 304 sanitary piping with automatic valves Documentation ABE brewhouse manual (specifications, plumbing and electrical diagrams, HMI screens) and ATTSU steam generator manual. Condition Used, installed and in operation. Availability From 23 September 2026. Location: Spain.

Condition: used, maximum load weight: 25,400 kg, overall weight: 35,000 kg, axle configuration: 2 axles, first registration: 07/2003, next inspection (TÜV): 12/2026, total length: 14,000 mm, total width: 2,600 mm, total height: 3,890 mm, Year of construction: 2003, Stated prices exclude BPM and apply only to export. Fedpfx Alsz N N S Ro Aogh

Condition: new, maximum load weight: 37,820 kg, overall weight: 41,000 kg, axle configuration: 3 axles, Equipment: ABS, You can find our complete vehicle inventory, including vehicles available for immediate and short-term delivery, on our website. Below is an excerpt of the equipment. Complete equipment list available upon request. Chassis 10110.030 Chassis frame made of high-quality steel, but without an outer frame. 10300.010 Coupling plate with a 2-inch kingpin according to DIN 74080 / ISO 337. K11110.893 With crossmember and container locking devices for accommodating: a) 1 x 20' container, flush at the rear. b) C715 Fsdpfxjz N Nw Tj Al Ajgh Vehicle equipped with Quick-Lock locking devices! Suspension I 17160.013 Axle lift mechanism on axle 1. I 17165.113 Control of the axle lift, fully automatic, load-dependent. Starting aid: activation via 3x brake, 30% overload up to a speed of 25 km/h. I 17170.010 Operation on the chassis via switch. Also possible from the cab (switch in the cab required - PIN 12). 18330.701 Manufacturer of choice: Kögel - three-axle unit, with disc brakes Ø approx. 430 mm, installation depth approx. 120 mm. Air suspension with approx. 180 mm travel. Vehicle Tires L20520.010 Wheels with internal sensors according to UN ECE R141. 20540.040 Tires 6x 385/65 R 22.5, ATHOS HG 2144 (164J). Chassis Components I 20110.012 JOST landing gears, mechanical with compensating foot, approx. 24 t lifting capacity. One-sided operation on the right side in the direction of travel. 21070.169 Splash guard system (spray mist suppression) according to Regulation (EU) No. 109/2011 for three-axle unit with 22.5-inch tires consisting of: 3 pairs of semi-circular fenders with splash flaps. 21300.001 2 chock blocks with holder. 27510.130 Rigid rear underrun protection made of steel according to ECE-R58, in a bolted design. Braking / Air Suspension System 32110.058 EBS system 2S/2M with stability program (includes ABS/ALB function), EBS socket connection ISO 7638, (without connecting cables), parking brake as spring brake, external pneumatic connections as well as external EBS diagnostic connection via ISO 7638 socket connection. I 32125.015 WABCO EBS system. 33420.070 Air suspension system incl. 1 lifting and lowering valve, mounted on the left side in the direction of travel in front of the axle unit. 34320.001 2 non-interchangeable coupling heads at the front ISO 1728. 34410.010 Air tank for brake system and air reserve made of steel (EN 286-2). Rear Impact Protection 42551.040 Solid steel rear impact protection on the rear end crossmember. Electrical / Electronics 60500.055 Lighting carrier made of steel, arranged above the underrun protection. 61100.220 KÖGEL LUXIMA Premium Package, consisting of: - LED license plate lighting, LED outline lights and reflectors at the front. - Flashing LED side marker lights. - Superseal and bayonet connections for the lights. I 61910.120 2 LED multi-chamber tail lights with integrated LED outline lights with arm. K64100.932 Adapter spiral connecting cable (4m) from 15-pole socket to 2x7-pole plugs. Does not comply with ADR regulations! 64300.017 Front socket connection, 15-pole ISO 12098 (without connecting cables). I 65250.152 2 LED reversing lights (manufacturer of our choice) mounted on the rear end crossmember. The operator must ensure sufficient electrical protection of the towing vehicle (ISO 12098 Pin 8, ISO 3731 24V-S Pin 3). K 68000.993 Complies with vehicle class EX/II, EX/III, FL, AT. Information Systems L69100.073 Tire pressure monitoring system according to UN ECE R141. Signage I 71100.030 1 hazardous goods sign, neutral

Condition: refurbished (used), Year of construction: 2015, machine/vehicle number: R-00717, load capacity: 20 kg, arm reach: 1,650 mm, controller manufacturer: IRC5, teach pendant manufacturer: DSQC679, Refurbished ABB IRB 2600-20/1.65 manufactured in 2015.11. The robot comes with an IRC5 controller including Flexpendant DSQC679. Fodpjz I N N Sofx Al Ajgh   Our experts extensively tested the robot, after which we conducted a maintenance service according to the manufacturers’ specifications. The oil is examined for the amount of iron particles, indicating the corresponding axes' condition. Only robots in excellent mechanical condition will be completely refurbished, ensuring a long-term solution for our customers. This enables us to deliver our robots with a warranty term of 12 months as standard!   Brand: ABB Model: IRB 2600-20/1.65 Model Number: IRB-2600 Year of Manufacture Robot: 2015.11 Warranty term (months): 12   Payload (kg): 20 Reach (mm): 1650 Repeatability (mm): ± 0.04 Controlled Axes: 6-axis Installation Type: Floor, Upside-down Mount Weight (kg): 272   Controller: IRC5 Year of Manufacture Cabinet: 2015.11 RCC Length (m): 14   Teach Pendant: DSQC679 Teach Pendant Cable Length (m): 15

Year of construction: 2021, condition: used, functionality: fully functional, The iCombi Pro is the latest combination oven from Rational. The iCombi Pro 20.1/1 GN electric model, with 20 GN 1/1 compartments, is easy to operate even for untrained personnel, as it achieves outstanding food quality without requiring constant monitoring. The combination oven has undergone a comprehensive inspection in our in-house workshop and is therefore fully functional. It comes with a 6-month warranty on all electrical parts. You will receive an invoice with VAT shown. The recommended retail price is: €25,520 net / €30,368.80 gross. Our price: €10,907.56 / €12,980 gross. These are example images; actual images will follow shortly. The unit will be available shortly, as inspection work is currently being carried out. Our used equipment service for you: 6 months warranty on electrical parts, limited to the replacement of defective parts, excluding installation and removal costs. Fgsdpfxjz Ib S Se Al Ajh High-quality brand-name equipment at fair prices. Professional overhaul/inspection and expert cleaning. Tested and fully functional - or your money back. Flexible shipping or self-pickup options. Competent advice - before and after purchase. Provision of operating instructions, connection diagrams & spare parts. Inspection according to DGUV V3 Technical data: W x D x H: 877 x 913 x 1872 mm Minimum door opening dimensions for transport W x H: 900x1900mm Serial number: E21SJ21092917087 Year of manufacture: 2021 Max. loading capacity / compartment: 5 kg Max. total loading capacity: 100 kg Weight of electric appliance: 254 kg Electrical connection conditions: Voltage 3 NAC 400 V Electrical connection capacity: 37.2 kW Steam operation power: 36 kW Hot air power: 36 kW Fuse rating: 63 A Water connection conditions: Water inlet (pressure hose): 3/4 inch Water outlet: DN 50 Condition: Used, inspected and fully functional. Further details: Temperature range: 30°C to 300°C Senses the current cooking chamber conditions Recognizes the size, the amount of food loaded, and the product condition and calculates the browning accordingly Learns which cooking habits are used most often and implements them Determines the ideal cooking path to the desired result MyDisplay - user-adjustable, user-specific operating display TFT color display and touchscreen Application and operating manual can be accessed on the appliance display Core temperature sensor with automatic error correction in case of sensor failure and positioning aid Door - triple glazed, energy-saving LED interior lighting Includes energy consumption display Humidity regulation: percentage-accurate humidity measurement and setting Individual programming of at least 350 cooking programs with up to 12 steps Spraying adjustable in 3 levels USB interface High-performance fresh steam generator with automatic descaling 5 programmable air speeds Integrated, maintenance-free grease separator system without additional grease filter Cool-down function: rapid cooking chamber cooling Automatic adjustment to the installation location (altitude, climate, etc.) Appliance door with ventilated triple-pane glass and pivoting inner pane Wastewater fixed connection permissible according to SVGW Separate solenoid valves for soft and warm water up to +30°C Automatic start time preselection adjustable with date and time Material inside and outside made of stainless steel DIN 1.4301 WiFi module integrated Subject to change and errors.

Condition: used, Multispindle lathe GILDEMEISTER AS 20 Fjdpfsz I Ur Esx Al Aegh

Condition: used, functionality: fully functional, machine/vehicle number: 516215010155, Year of construction: 2007, operating hours: 6,982 h, load capacity: 2,000 kg, lifting height: 4,600 mm, fuel type: electric, mast type: triplex, construction height: 2,160 mm, drive type: Elektro, Electric 3-Wheel Forklift Fsdpfeyigvmjx Al Aogh Chassis number: 516215010155 Mast type: Triplex Condition: Ready for use and fully functional Technical condition: Good Description: For sale is an electric 3-wheel forklift by Still, model RX 20-20. The vehicle is ready for immediate operation and fully functional. Both the technical and visual conditions are good. Thanks to the 3-wheel design, this forklift is particularly maneuverable and ideally suited for warehouse operations, logistics centers, and confined spaces. The forklift offers a load capacity of 2,000 kg and is equipped with a triplex mast. The lift height is 8,095 mm with a closed height of 2,160 mm. Year of manufacture is 2007, with 6,982 operating hours. In addition, the vehicle is fitted with a full cabin, providing the operator with weather protection and significantly increased comfort. A battery is included. A charger is not included but can be supplied on request. The forklift is available immediately. Quick and uncomplicated transport can be arranged upon request. Subject to prior sale and errors. Sale is carried out under exclusion of any warranty or guarantee. Side shifter, fork positioner, third hydraulic valve, fourth hydraulic valve, full cabin,

Condition: excellent (used), mileage: 651,005 km, power: 331 kW (450.03 HP), first registration: 03/2021, fuel type: diesel, tire size: 315/80R22.5, axle configuration: 4x2, wheelbase: 3,750 mm, fuel: diesel, brakes: retarder, color: grey, driver cabin: sleeper cab, gearing type: automatic, emission class: euro6, suspension: air, permissible axle load (axle 1): 7,500 kg, permissible axle load (axle 2): 11,500 kg, Year of construction: 2021, Equipment: ABS, AdBlue, EBS, air conditioning, airbag, central locking, cruise control, differential lock, electric window regulation, fog lights, fridge, parking heater, power assisted steering, retarder, soot filter, traction control, trailer coupling, = Additional Options and Accessories = - Alarm system - Aluminum fuel tank - Speed limiter - Intarder Fgsdpfxezv D Inj Al Ajh - Tilting hydraulics - Air conditioning - Alloy wheels - Air suspension - Particle filter - Radio/CD player - Reversing camera - Sleeper cab - Sun visor - Stability control - Auxiliary heater - Bumpers in body color - Automatic heating system - Power take-off (PTO) = Notes = SCANIA R450 NGS Hydraulics Retarder 651005 km 2021 Full air suspension Alcoas Smart Tacho 2 Auxiliary air conditioning Reversing camera Air conditioning ACC Cruise control Refrigerator Seat heating/cooling Automatic transmission Euro6-D TÜV/MOT/APK valid until 03-2027 German vehicle Chassis number: YS2R4X20005616734 Video of the truck (YouTube): EXPORT SERVICES ————— • Austrian transit registration/license plate with insurance for 21 days • Transport to any port in the Netherlands and Belgium • Truck transport with trailer The prices for export services are exclusive of the offer price. Please contact us for further information. No rights can be derived from incorrect information in the advertisement. GEERTS Trucks & Trailers always strives to ensure the accuracy of all information. = Further Information = Technical Information Number of cylinders: 6 Engine displacement: 12,742 cc Axle Configuration Tire size: 315/80R22.5 Axle brand: MICHELIN Brakes: Disc brakes Suspension: Air suspension Front axle: Alloy wheels; Max. axle load: 7500 kg; Steered; Tire tread left: 80%; Tire tread right: 80% Rear axle: Double tires; Differential lock; Alloy wheels; Max. axle load: 11500 kg; Tire tread left inner: 50%; Tire tread left outer: 50%; Tire tread right inner: 40%; Tire tread right outer: 40%; Reduction: single reduction Weights Unladen weight: 7,265 kg Payload: 11,735 kg GVW: 19,000 kg Maintenance, History and Condition APK (Technical Inspection): valid until 03.2027 Technical condition: very good Optical condition: good Further Information Please contact Olivier Geerts or Edwin Geerts for further information.

Condition: new, Year of construction: 2022, machine/vehicle number: 27762, type of input current: three-phase, input voltage: 22,000 V, input frequency: 50 Hz, nominal power (apparent): 250 kVA, secondary voltage: 400 V, type of output current: three-phase, output voltage: 400 V, Equipment: type plate available, SEA Trasformatori TTO oil-immersed distribution transformer for outdoor installation. Condition: new and unused warehouse stock. Never commissioned. Year of manufacture: 2022. Serial number: 27762. Country of manufacture: Italy. Nameplate data: - Rated power: 250 kVA Fjdpfx Aljz Nx I Is Aogh - Primary voltage: 22 / 20 kV - HV tapping range: +/- 4 x 2.5% - Secondary voltage: 400 V - Rated secondary current: 360.8 A - Frequency: 50 Hz - Phases: 3 - Cooling: ONAN - Winding material: aluminium - Highest voltage for equipment: 24 kV - Insulation level: LI 125 kV / AC 50 kV - Temperature rise: oil 60 K / windings 65 K The attached photograph shows the original manufacturer nameplate.

Condition: reconditioned (used), functionality: fully functional, pressure: 200 bar, input voltage: 400 V, overall weight: 168 kg, temperature: 155 °C, Kärcher HDS 10/20-4MX Hot Water Pressure Washer The unit comes with new accessories, including a German-made R+M spray gun, a stainless steel lance, a steel-reinforced hose, and a 25° power nozzle. A built-in high-pressure hose reel makes winding and storage easy. A durable brass pump head with new ceramic pistons and seals ensures long, trouble-free operation. A highly efficient, low-speed three-phase motor ensures stable performance, even during prolonged use. With operating parameters of 200 bar and 1000 l/h, the machine is effective for heavy-duty tasks in construction, industry, logistics, and agriculture. Each unit we offer features custom-taken photos; you are buying the exact machine shown. TECHNICAL DATA: Model: HDS 10/20-4MX Supply voltage: 400 V ~ 3-phase Flow rate (l/h): 500 – 1000 Operating pressure (bar): 30 – 200 Max. Water heating temperature (°C): 80–155 Connected load (kW): 7.8 Fuel tank capacity (l): 25 Detergent tank capacity (l): 20 + 10 High-pressure hose length (m): 20 Weight (kg): 168 Dimensions (L x W x H mm): 1330 x 750 x 1060 EQUIPMENT: Built-in hose reel NEW heavy-duty high-pressure gun (German brand R+M) NEW stainless steel spray lance NEW reinforced 20m high-pressure hose with steel braiding NEW 25° power nozzle Water filter and GEKA claw couplings – FREE KEY FEATURES: Open oil system – no operating time limits Two built-in detergent tanks allow for direct dosing of cleaning fluid through the machine Highly legible and intuitive control panel Simple design and easy access to internal components make the machine user-friendly and easy to service Fsdpfx Aljz Nguis Asgh RM110 water softener tank prevents corrosion and scale buildup inside the heating coil and other lines. The exhaust gas temperature sensor shuts down the engine if the temperature exceeds 300°C. When the eco!efficiency function is activated, the unit heats the water to 60°C, enabling effective cleaning—even of heavy soiling—while reducing fuel consumption by approximately 20%.

Condition: used, axle configuration: 3 axles, permissible axle load (axle 1): 9,000 kg, permissible axle load (axle 2): 9,000 kg, permissible axle load (axle 3): 9,000 kg, first registration: 09/2007, total length: 9,290 mm, total width: 2,470 mm, suspension: air, tire size: 385/65, tire condition: 40 %, wheelbase: 7,460 mm, color: other, Year of construction: 2007, Equipment: ABS, = Additional options and accessories = Fodpfxsz Ngu Ns Al Aogh - ADR - Air Suspension - BPW Axles - Drum brakes = More information = Axle configuration Tyre size: 385/65 Brakes: drum brakes Suspension: air suspension Rear axle 1: Lift axle; Max. axle load: 9000 kg; Tyre profile: 40% Rear axle 2: Max. axle load: 9000 kg; Tyre profile: 40% Rear axle 3: Max. axle load: 9000 kg Weights Empty weight: 3.983 kg Carrying capacity: 37.017 kg GVW: 41.000 kg Identification Registration number: OJ-15-YP

Condition: like new (used), ROBOT ARM BRAND: KUKA servo controller 00-134-525 Fgodpfx Aez I Na Rjl Ash KPS-600/20-ESC

Condition: used, machine/vehicle number: 16136, Year of construction: 2019, operating hours: 3,045 h, load capacity: 2,000 kg, fuel type: electric, mast type: other, enginetype: Electric, manufacturer: Still Fodew R Dqmspfx Al Ajgh Serial Number: W41609V00208

Condition: used, mileage: 257,050 km, power: 120 kW (163.15 HP), first registration: 07/2021, fuel type: diesel, overall weight: 5,500 kg, color: white, gearing type: mechanical, emission class: euro6, number of seats: 3, total length: 6,850 mm, total height: 3,250 mm, loading space length: 4,200 mm, loading space width: 2,050 mm, loading space height: 2,200 mm, Equipment: ABS, air conditioning, central locking, electronic stability program (ESP), navigation system, soot filter, tail-lift, Internal vehicle number: 7355B ----Why autonext? Over 400 immediately available cars & commercial vehicles. One of the largest vehicle showrooms in the region. Over 1,000 satisfied customers annually - top customer ratings. Attractive financing & trade-in options available. Complete vehicle selection on autonext - Mobility made easy. WhatsApp chat: ### Offer: Financing from 4.99% ### ----Good, well-maintained condition. 1st owner, German vehicle, non-smoking vehicle. Complete and consistent service history, exclusively at Mercedes-Benz. Body: Maxi refrigerated box van ThermoKing V500 MAX refrigeration unit Refrigerant R-404A / R-452A Standby cooling + engine cooling Optionally, we offer you a refrigeration service from the manufacturer for only 899,- Euro. Hydraulic tailgate (750 kg) Payload 2,030 kg Permissible total weight 5,500 kg Loading area: Length 4.20m / Height 2.20m / Width 2.05m Rearview camera Navigation system Regulated air conditioning (Tempmatik) ---- Special features: * MBUX multimedia system (7" touchscreen) * Bluetooth hands-free system * Multifunction steering wheel * 1 DIN slot in front under the dashboard, passenger side * 2nd battery (auxiliary battery) interior * Acoustic package * Exhaust pipe in front of the rear axle, left * Extended exterior mirror base, left/right * Battery disconnect switch, 1-pole * DAB tuner (digital radio reception) * Vehicle without start/stop system * Generator 250 A * Speed limiter 90 km/h * Connection strip for electrical connections (driver's seat box) * Regulated air conditioning (Tempmatik) * Fuel filter with water separator * Front engine drive with carrier for additional coolant compressor * Navigation system for MBUX multimedia system * Seats in the driver's cab: Double passenger seat * Separation relay for additional battery * Reinforced front axle Standard features: Storage compartment above the windshield, Adaptive brake lights, Airbag driver side, Anti-lock braking system (ABS), Anti-slip regulation (ASR), Drive type: Rear-wheel drive, Display for windshield washer fluid level, Exterior mirrors electrically adjustable and heated, both, Exterior temperature display, Roof lining in the driver's cab, Automatic activation for driving lights, Electronic brake force distribution (EBV), Electronic stability program (ESP), Driving assistance system: Active brake assist, Driving assistance system: Crosswind assist, Driving assistance system: Lane keeping assist, Digital tachograph, Suspension: Stabilization Level II, Electric window lift 2-fold, Gearbox 6-speed - TSG (Eco Gear), Body/structure: Standard platform body, Keyless start, Communication module (LTE) for digital services, Fuel tank: Main tank 71 liters, Steering wheel (steering column mechanically adjustable), Headlight range adjustment, Truck registration, Side marker lights, Mercedes-Benz emergency call system, Engine 2.1 liters - 120 kW CDI CAT, Particle filter, Wheelbase 4325 mm, Low emissions according to emissions standard Euro 6, Safety belt system with warning system (driver's side), Seat cover / upholstery: Fabric, Seats in the driver's cab: Driver's seat with armrest, Seats in the driver's cab: Driver's seat adjustable, Daytime running lights, Underrun protection rear, Fleece battery 92 Ah, Maintenance interval display Assyst, Immobilizer, Heat-insulating glazing (windshield with band filter at the top), Central locking with remote control, Permissible total weight 5.00 t. ----MOT/technical inspection upon request Fedjxdm Dzspfx Al Asgh

Condition: refurbished (used), Year of construction: 1996, functionality: fully functional, travel distance X-axis: 3,000 mm, travel distance Y-axis: 1,000 mm, travel distance Z-axis: 900 mm, rapid traverse X-axis: 10 m/min, rapid traverse Y-axis: 10 m/min, rapid traverse Z-axis: 15 m/min, feed rate X-axis: 5 m/min, feed rate Y-axis: 5 m/min, feed rate Z-axis: 5 m/min, position of the milling head: osa A 105°+ osa B 90°, spindle speed (max.): 3,500 rpm, spindle speed (min.): 3,500 rpm, table width: 800 mm, table load: 8,500 kg, table length: 3,000 mm, table height: 1,000 mm, total height: 3,400 mm, total width: 4,360 mm, total length: 7,760 mm, type of input current: three-phase, rotational speed (max.): 3,500 rpm, workpiece weight (max.): 8,500 kg, overall weight: 18,000 kg, year of last overhaul: 2025, spindle motor power: 22,000 W, power: 22 kW (29.91 HP), Equipment: rotational speed infinitely variable, FSQ 80(100) S/A3 CNC - TOS KUŘIM Bed Milling Machine, Table Length 3m Control System: Heidenhain 415F Complete Mechanical Overhaul: 2024 Availability: IMMEDIATE DELIVERY Warranty: 6 months FSQ 80(100) O/A3 CNC – Technical Specifications: Basic machine data: Manufacturer: TOS Kuřim Overall length: 7,760 mm Overall width: 4,360 mm Overall height: 3,400 mm Total weight: 18,000 kg Total power consumption: 40 kVA Working range: Longitudinal travel X-axis: 3,000 mm Cross travel Y-axis: 1,000 mm Vertical travel Z-axis: 900 mm Spindle head (S Head): Max. power: 22 kW Speed range: 16 – 3,500 rpm Number of speed ranges: stepless Spindle rotation around A-axis: 105° Spindle rotation around B-axis: 90° Feed range X – Y / Z: Number of speed ranges / range: stepless / 1 – 5,000 mm/min Rapid traverse Y – Z / X: 10,000 / 15,000 mm/min Table: Table area: 800 x 3,000 mm Max. load: 8,500 kg Control System: Fgedexp Dkcspfx Al Ajh Heidenhain 415F Further details on request.

Condition: used, Year of construction: 1998, functionality: fully functional, travel distance X-axis: 4,000 mm, travel distance Y-axis: 1,400 mm, travel distance Z-axis: 1,000 mm, rapid traverse X-axis: 10 m/min, rapid traverse Y-axis: 10 m/min, rapid traverse Z-axis: 15 m/min, feed rate X-axis: 5 m/min, feed rate Y-axis: 5 m/min, feed rate Z-axis: 5 m/min, torque: 1,200 Nm, controller manufacturer: SIEMENS SINUMERIK 840D, workpiece weight (max.): 18,000 kg, total height: 4,950 mm, total length: 10,270 mm, total width: 5,640 mm, table width: 1,000 mm, table height: 800 mm, table length: 6,000 mm, table load: 18,000 kg, rotational speed (min.): 16 rpm, rotational speed (max.): 3,200 rpm, overall weight: 21,000 kg, spindle speed (max.): 3,200 rpm, spindle motor power: 22,000 W, type of input current: three-phase, Equipment: chip conveyor, documentation/manual, rotational speed infinitely variable, FFQ 100W-A6(A8) CNC – TOS KUŘIM Machining Center, Table Length 6m (8m) Control System: Siemens 840 C Availability: According to selected refurbishment Warranty: According to selected refurbishment Can be supplied as used, after medium repair, or after general overhaul, including modernization. FFQ 100W-A6(A8) CNC – Technical Specifications: Basic Machine Data: Manufacturer: TOS Kuřim Overall Length: 10,270 mm Overall Width: 5,640 mm Overall Height: 4,950 mm Total Weight: 21,000 kg Total Connected Load: 40 kVA Working Range: Longitudinal Travel X-axis: 4,000 mm (6,000 mm) Cross Travel Z-axis: 1,000 mm Vertical Travel Y-axis: 1,400 mm Horizontal Spindle Head with Extendable Quill: Tool Taper per ČSN 22 0433 ISO 50 Max. Power: 22 kW Speed Range: 16 – 3,200 rpm Number of Speed Steps: Infinitely variable Max. Torque: 1,200 Nm Quill Diameter: 170 mm Quill Extension: 400 mm Quill Working Feed Range: 1 - 2,000 mm/min Quill Rapid Traverse: 4,000 mm/min Max. Quill Feed Force: 10,000 N Spindle Head (IPS head): Tool Taper per ČSN 22 0433 ISO 50 Max. Power: 22 kW Speed Range: 16 – 3,200 rpm Number of Speed Steps: Infinitely variable Max. Torque: 1,200 Nm Machining H-V, spindle automatically adjustable to vertical or horizontal position Fjdjxp Iz Sspfx Al Asgh Feed Range X – Y / Z: Number of Steps / Range: Infinitely variable / 1 – 5,000 mm/min Rapid Traverse Y – Z / X: 10,000 / 15,000 mm/min Table: Table Area: 1,000 x 6,000 mm (8,000 mm) Max. Load: 3,000 kg/m2 Tool Magazine: Number of Positions: 40 pcs Control System: SIEMENS 840 C Details upon request.

Condition: used, functionality: unexamined, Used Linde T16 with charger Fsdpsxvifxsfx Al Aogh

Condition: new, Year of construction: 2026, functionality: fully functional, machine/vehicle number: 0000025, center height: 315,425 mm, workpiece weight (max.): 3,000 kg, grinding length: 3,000 mm, grinding wheel diameter: 750 mm, total width: 2,700 mm, total length: 11,000 mm, total height: 2,200 mm, grinding diameter: 630,850 mm, workpiece weight between centers: 3,000 g, distance between centers: 3,000 mm, grinding wheel width: 100 mm, feed length Z-axis: 3,300 mm, grinding spindle speed: 1,000 rpm, overall weight: 17,000 kg, rotational speed (min.): 2 rpm, rotational speed (max.): 250 rpm, warranty duration: 24 months, rapid traverse X-axis: 3 m/min, rapid traverse Z-axis: 6 m/min, input voltage: 400 V, workpiece spindle speed (max.): 250 rpm, Equipment: rotational speed infinitely variable, Cylindrical grinding machine BUC63/3000 CNC new in 100% condition with Sinumerik ONE control system, or INTRONIX TOS CNC. Fgjdpfsu U Ewgox Al Ajh It is possible to expand with additional equipment for superfinishing SUPFINA, or for grooving equipment for rubber or plastic rollers.

Condition: ready for operation (used), Year of construction: 1985, functionality: fully functional, machine/vehicle number: 0440298, table bore: 120 mm, table diameter: 500 mm, overall weight: 5,200 kg, gear diameter: 500 mm, TECHNICAL DETAILS Wheel diameter: 500 mm Minimum wheel diameter: 50 mm Maximum external ring diameter of processed gear with internal gearing: 800 mm Fedpfxjyx U T Aj Al Asgh Maximum distance from shaping axis to table axis: 355 mm Minimum distance from shaping axis to table axis: 0 mm Maximum number of teeth of processed gear: 300 Minimum number of teeth of processed gear: 12 Smallest module: 1.5 Largest module: 8 Table diameter: 500 mm Table bore: 120 mm Bore depth: 650 mm MACHINE DETAILS Weight: 5,200 kg

Condition: excellent (used), 595 x 395 mm Clamping pressure -70 bar MARCELS MASCHINEN AG Fsdpeiz A E Eefx Al Aogh

Condition: new, functionality: fully functional, machine/vehicle number: 0640, empty load weight: 2,200 kg, maximum load weight: 20,000 kg, overall weight: 22,200 kg, axle configuration: 2 axles, first registration: 01/2025, next inspection (TÜV): 01/2026, loading space length: 5,000 mm, loading space width: 2,200 mm, tire size: 23x10-12 SE, color: orange, Year of construction: 2025, operation weight: 22,200 kg, TPW 206 AL - AS SE payload 16000 kg on the loading area at 6 km/h. Dimensions: 5000 mm long, 2200 mm wide and 680 mm high. Fgjdpfjrcf H Uex Al Ash Transport floor made of spruce wood 40 mm tongue and groove Super elastic tires with profile 23x10-12 with steel rims, conical bearings on both sides, sealed with Nilos ring Drawbar with fall protection and height adjustment, towing eye 40 mm. Steering: all-wheel steering knuckle. Safety: weld-on supports, five per long side (see load securing and double-acting wheel chock mounted on the frame) Paint: yellow orange RAL 2000

Condition: used, axle configuration: 2 axles, first registration: 08/2020, next inspection (TÜV): 06/2027, total length: 5,633 mm, total width: 2,186 mm, Thank you for your interest in one of our vehicles. We, ALLROUND Autovermietung GmbH, offer you a well-maintained vehicle for sale. If you are interested in this vehicle, please do not hesitate to contact us by phone or email to arrange a viewing appointment. The vehicles are not always located directly at our premises. Fgjdpoz Numtofx Al Aeh The trailer is located in MAGDEBURG! The trailer is located in MAGDEBURG! The trailer is located in MAGDEBURG! The vehicle is located at our external storage facility; therefore, please contact us to arrange a viewing. Thank you! Subject to price changes, typographical errors, and errors; intermediate sale reserved.