Milling Machine

TOS FGSH 50

Condition: good (used), Year of construction: 1998, Hermle C 600 U CNC Machining Center Manufacturer: Hermle Model: C 600 U Year of manufacture: 1998 Operating voltage: 400 V / 3~ Frequency: 50 Hz Control voltage: 24 V Total rated current: 31 A Control system: Heidenhain TNC 426 Machine weight: 6,400 kg X-axis travel: 600 mm Lrodpfx Afsyrr Ucoajk Y-axis travel: 450 mm Z-axis travel: 450 mm Tool magazine: 30 positions Tool holder, type: SK-40 Accessories: included, as per photos (vice + probe) No guarantee is given for the correctness, completeness or up-to-dateness of the information provided.

Condition: good (used), Year of construction: 2003, functionality: fully functional, workpiece weight (max.): 12,000 kg, feed length Y-axis: 300 mm, feed length Z-axis: 1,080 mm, table diameter: 1,200 mm, feed rate X-axis: 3 m/min, feed rate Y-axis: 500 m/min, feed rate Z-axis: 3 m/min, input current: 195 A, workpiece diameter (max.): 1,600 mm, milling spindle length: 450 mm, table bore: 400 mm, spindle speed (min.): 250 rpm, overall weight: 51,000 kg, power: 115 kW (156.36 HP), Equipment: documentation/manual, Liebherr high-performance gear hobbing machine LC1502 in good condition Controller Liebherr LH90 V4, Bosch Rexroth drives Lrsdpswqm A Tsfx Afajk Extensive accessories such as BHG, cooling unit for lubrication and coolant, extractor, cutter arbors, various software packages/limit value extensions, and complete documentation. We can also assist with setup and commissioning up to production, depending on effort!

Condition: good (used), Year of construction: 2015, functionality: fully functional, machine/vehicle number: 265864, turning diameter: 350 mm, spindle speed (max.): 5,000 rpm, spindle speed (min.): 35 rpm, travel distance X-axis: 195 mm, travel distance Z-axis: 560 mm, spindle motor power: 15 W, feed rate X-axis: 30 m/min, feed rate Z-axis: 33 m/min, torque: 233 Nm, distance table center to spindle nose: 687 mm, Equipment: documentation/manual, Mazatrol Smart Control. Spindle speed 5000 rpm. Lrjdpsvfm H Aofx Afask X/Z travel 195mm/560mm. Fitted with 215mm diameter. 3 jaw-powered chuck 12-station turret. Tailstock. Tool setter. Part catcher.

Condition: good (used), Year of construction: 1997, TBT ML 200-2-850 deep hole drilling machine TECHNICAL DATA Type: M200-2-850 Number of spindles: 2 Lrsdpfxsvca Rce Afaek Drill carriage stroke: 850 mm Drilling method: Single-lip drilling Drilling depth with: Submersible spindle: 120 mm Sealing housing: 400 mm Sealing housing with bezel: 350 mm Spindle drive Power: 2 / 3.5 / 1.5 kW Voltage: 140 / 350 / 350 V Speed: 14 / 11 / 6 / A Feed - own drive Feed speed: 20 - 500 mm/min Rapid traverse speed NC operation: 12 m/min Feed force: 1.5 kN Motor power: 2.2 Nm at 3000 rpm Clamping tailstock Motor power: 0.75 kW at 1000 rpm Spindle speed: 500 rpm Stroke max: 200 mm Main dimensions L x W x H: 4600 x 2500 x 2100 mm Transport weight: 3200 kg Control: Sinumerik 805 M No liability is assumed for the correctness, completeness and up-to-dateness of the information provided

Condition: as good as new (ex-display), Year of construction: 2023, Control : Heidenhain TNC 640 Travels X : 1,020 mm Travels Y : 520 mm Travels Z : 610 mm Clamping surface (L x B) : 1,160 x 520 Table load : 750 kg Spindle Speed : 15,000 rpm direct Tool holder: SK40 (BigPlus) DIN69872 In general Tool changer : 30-stations Machine bed : Meehanite cast Repetitive accuracy : 0.008 mm Lrsdpfx Aot Dizvefajk Equipment Chip conveyor Coolant supply Elect. handwheel high pressure coolant

Condition: ready for operation (used), Maximum forming capacity at full length: 9 gauge mild steel, corresponds to approx. 3.8mm, max. forming length: 3200mm, min. flange height: 6 x material thickness, clamping beam speed: maximum speed 91.44mm/s, downward speed 39.88mm/s, bending speed: 1879.6mm/s, bending angle range: 0°-180°. Dimensions X/Y/Z: approx. 5160mm/2220mm/1780mm, weight: approx. 5300kg. The machine has a front gauge, thus the bending geometry is stored and the sheet size is irrelevant. An on-site inspection is possible. Lrjdetia Hhspfx Afask

Condition: excellent (used), feed length X-axis: 450 mm, feed length Y-axis: 300 mm, feed length Z-axis: 300 mm, CNC TOS INTOS ZEBRAK FNG30 milling machine TNC310 Heidenhain control X450mm Y300mm Z300mm Lsdpfxsrq D Ukj Afasrk tool clamping hydraulic inverter on spindle SK40 machine in very good condition

Year of construction: 2012, condition: good (used), Muratec MW120 GT for sale Used, in excellent condition. Lrsdpfx Aoifi D Tofask The machine can be viewed by appointment. Delivery is the customer's responsibility, but we can help with packing and loading of need. Delivery: EXW Székesfehérvár

Condition: new, Year of construction: 2018, NEW PRODUCT at a special price Tactile coordinate measuring machine from Innometrik Measuring range 1200 x 3000 x 1000 Maximum workpiece weight: 1000 Kg Accuracy MPEE: 2.2 + L / 350 (in μm) Scale resolution: 0.1 / 0.5 in μm - Air bearings on all axes Linear speed: 300mm / s Lodpfx Aodyl H Nsfasrk Volumetric speed: 520 mm / s Touch probe: Renishaw Tp200 incl. 3 modules (SF, HF, LF) and probe changer 3 compartment Software: OptiCheck 4.5 & Virtual DMIS (separate partitions) Optionally Polyworks according to customer requirements -Incl. PC (Windows 7) Alternatively Windows 10 -Incl. 2 monitors -Incl. Mouse keyboard Picture: sister device

Year of construction: 1976, condition: good (used), strip width: 300 - 1.350 mm strip thickness: 0,35 - 3 mm Lrjdpfx Aebh Ubwsfaok coil weight: 12,5 t mandrel Ø: 508 mm