Center lathe

Harrison M-250

Condition: good (used), Technical details Turning diameter over bed: 280 mm Turning diameter over support: 170 mm Turning length: 680 Rotational speed: 40 - 1500 / 9 step rpm Spindle bore: 35 mm Top slide adjustment: 150 mm Tailstock holder MK: 3 Tailstock quill stroke: 95 mm Total power requirement: 0.9 kW Dcodpfxsq Ixqgj Aa Eed Machine weight approx: 410 kg Transport dimensions LxWxH: 1.6x0.8x1.4 m

Condition: used, length:1800 mm width:1200 mm Dsdpfx Aaecxxu De Escd weight of the machine ca.:1,6 t dimensions of the machine ca.:1,8 x 1,2 x 0,4 m

Condition: good (used), Year of construction: 1990, 1 x L+Z Lathe Harrison M 250 Year of manufacture: approx. 1990 Well-maintained machine from a small toolmaking workshop. Technical specifications: Centre height: 145 mm Centre distance: 500 mm Swing over bed: 280 mm Spindle bore: 35 mm Spindle speeds: 80 - 3,000 rpm Feeds: longitudinal: 0.012 - 0.4 mm/rev cross: 0.006 - 0.2 mm/rev Tailstock: Taper: MK 3 Accessories: 1 x 3-jaw chuck 125 mm UVA 1 x faceplate 1 x Multifix A quick-change toolpost with 4 tool holders 2 x revolving tailstocks 1 x fixed centre for tailstock 1 x fixed centre for spindle 1 x drill chuck 1 - 13 mm Operating manual in English Dcjdpfxex Utc Ie Aa Ejd Various turning tools Hand tools The machine can be inspected under power.

Condition: excellent (used), Universal lathe Harrison M250 The machine is in very good condition, not used in production. It served as an auxiliary machine in the maintenance department of the printing house. Technical data: Turning diameter over the bed: 280 mm Turning diameter over the slide: 170 mm Djdpfxsu R Udws Aa Ejcd Turning Length: 680MM Rotation speed: 40 – 1500/9 step U / min Spindle bore: 35 mm Tailstock taper MK: 3 Tailstock quill travel: 95 mm Total power requirement: 1.5 kW Machine weight approx .: 410 kg Dimensions L x W x H: 1.6 x 0.8 x 1.4 m The machine is equipped with an electronic position reading Insize ISL-DR2

Condition: new, Modern, precise production column drilling machine based on the proven UNIMAX 3 concept with stepless feed drive, automatic tool ejector, and standard chip breaker control. The digital display shows feed rate, speed, and drilling depth. Forward/reverse switch. Emergency stop button. Full motor protection. Preconfigured machine with optional thread cutting device, free-cutting function, and LED lamp. Standard drilling capacity in E 335: 30 mm Tapping capacity: M 20 Spindle: MT 3 Feed rate continuously adjustable in the range: 30 - 400 mm/min Programmable drilling depth: 125 mm Throat: 260 mm Distance spindle/table: 90 to 840 mm Table surface: 500 x 365 mm Column diameter: 110 mm Total height: 1,900 mm Weight: 280 kg Pole-changing motor: 0.8/1.5 kW Spindle speeds continuously adjustable Drilling range A: 80 - 1,440 rpm Drilling range B: 180 - 3,200 rpm Pre-configured machine including special equipment: - Thread cutting device - Free-cutting function Dedsf Ey Auopfx Aa Eecd - LED lamp

Condition: excellent (used), Year of construction: 2005, operating hours: 48,242 h, functionality: fully functional, machine/vehicle number: M253595-3634, This Harrison M250 lathe, serial number M253595-3634, is in fully functional condition. It comes with 3-jaw and 4-jaw chucks, coolant, work light, and a complete set of change gears for cutting metric threads. The machine has been used very little throughout its life, and the bed and carriage are in particularly good condition. It can be demonstrated using a phase converter, but I am not prepared to operate the machine with this device. Dsdpfxox Akc Eo Aa Eocd

Condition: used, functionality: fully functional, turning diameter: 290 mm, center height: 145 mm, spindle bore: 35 mm, spindle speed (max.): 2,000 rpm, spindle speed (min.): 52 rpm, total height: 1,200 mm, total length: 1,500 mm, total width: 700 mm, 3 Phase 380V motor is running fine! Djdpfxjwfiaqj Aa Escd Left & right running. Electronic engine brake. Geared headstock, gears running in oil. 9 Spindle speeds adjustable from 52 up to 2000 RPM. Metric lathe. Norton gearbox for easy thread cutting. Power feed in both side as cross ways direction. Original Harrison splash guard. D1-3 Camlock spindle nose. Multifix quick change toolpost with a total of 4 toolholders. MT3 Tailstock intake. Distance between centers: 800mm Center height: 145mm Spindle bore: 35mm Overall dimensions: 150x70x120cm Made in the UK. Contact us for shipping options! €3,900.00 Ex VAT

Condition: like new (used), Year of construction: 2004, functionality: fully functional, machine/vehicle number: 051888, Used automatic disc cut-off saw Brand: Pedrazzoli Model: SB 350/45 AP Registration number: 051888 Year: 2004 Head block rotation mechanism for angled cuts up to 45° to the left with locking lever. Pneumatic and anti-burr removable vice. Pneumatic cylinder for head movement, with brake for speed regulation. Transmission with double extensible pulley for variable speed from 15 to 90 m/s. Tilting head on adjustable self-lubricating bushings. 600 mm pitch feeder controlled by pneumatic cylinder. Repeat up to a maximum of 9 steps, to obtain a total stroke of 5400 mm. Maximum feeder clamp opening 160 mm. Programmable piece counter. Minimum final cut waste of 160 mm. Feeder speed regulating valve. Ammeter. Dcedpfsrfw Ikox Aa Eod Reverse gear. Emergency button and switch with padlock on the control panel. Blade lubrication-cooling system with electric pump. Coolant tank with removable pump for tank cleaning. Integral guarding designed for quick blade change. Blade disc Ø 350 mm. Cutting capacity: Round tubes 0°: 102mm 45° right: 102mm Square tubes 0°: 85mm 45° right: 90mm Rectangular tubes 0°: 158 x 85mm 45° right: 120 x 85mm Features: Three-phase 380V Dimensions: 1300 x 1350 x 1600 mm Work station height: 950 mm Weight: 420 kg

Condition: new, Year of construction: 2024, 1290 is a professional laser cutter for serious manufacturing. It has a through table, allowing you to cut materials and rolls of fabric of any length. The Wattsan CNC laser machine is built to have a 24/7 work capacity in series production. Wattsan 1290 ST can cut up to 10–13 mm and engrave wood, cardboard, acrylic, glass, rubber, stone, wool, etc. This model has a feature: you can remove the front wall and use the opened space to cut sheets and rolls of materials. It also has a waste collection container that will make the work much more pleasing. You can give our managers a call for additional details! Dcodpfx Aoh Ucrbea Eod Wattsan 1290 ST characteristics: Working area: 1200x900 mm Laser power: 100-130 W Working table lowering depth: 40 mm Positioning precision: 0,03 mm Machine size: 1410 x 1790 x 670 mm + if it is on wheels 315 mm Packing size: 1880 x 1490 x 810 mm Weight: 368 kg Virmer provides not only prime machines but also service and delivery. Our engineers and managers are ready to answer all of your questions and provide video assistance if required. Also, owners of Wattsan equipment get lifetime online support. Virmer is located in the Netherlands and works all over Europe. Virmer is Wattsan's official supplier. We provide not only laser engravers, but also metal cutters, welders, markers and cleaning machines. Wattsan is a Chinese manufacturer, which has been creating laser equipment for almost 15 years and keeps evolving with the help of its clients. Thanks to feedback Wattsan made over 50 modernizations, which made machines more reliable, precise and powerful so you could upgrade your business up to the new level. YOU CAN WRITE OR CALL US! WE WILL SELECT THE RIGHT MACHINE FOR YOUR TASK On our company you can find a wide range of machines and components: Laser Metal Cutting Machine; Laser Metal Machine, Fiber Metal Laser, Fiber Metal Laser Engraver; CNC laser machine for metal; Laser machine for wood; CNC laser machine; Laser engraving machine; Laser engraver; Laser cutting machine for plywood; Laser engraver; Laser cutting machine for metal; CNC milling machine; laser marker. Lenses; Chillers; Cooling system for machine; Chiller S&A ; IPG laser, MAX photonics, Raycus; Compressor; Rotary device; Mirror for laser machine.

Condition: new, Year of construction: 2025, Heavy, solid cast iron design High running smoothness due to ground gear wheels running in an oil bath Right/left hand rotation Automatic quill feed with manual fine feed Motorized positioning of the Z-axis Motorized table feed of the X-axis Coolant device Machine lamp Gear head can be swivelled ± 60 Adjustable wedge bars Solid dovetail guide of the column, hand-scraped, for highest stability and greatest possible precision Height-adjustable, large-dimensioned protective disk with microswitch Drilling depth stop Digital position indicator DRO 5 Drilling / tapping function Massive and large dimensioned cross table, precisely surface machined with T-slots and adjustable taper bars Solid cast iron machine base with chip channel Single-stage quality industrial electric motor Wide speed range from 60 - 2,760 min-1 due to 2 infinitely variable speeds Dimensions and weights Length approx. 1600 mm Width/depth approx. 930 mm Height approx. 2110 mm weight approx. 495 kg Drilling/milling capacity cutter head size max. 63 mm Dcsdpfjg U Uv Uox Aa Esd shank cutter size max. 26 mm Drilling capacity steel (S235JR) 24 mm Continuous drilling capacity steel (S235JR) 20 mm Electrical data Supply voltage 230 V Mains frequency 50 Hz Electrical connection Total connected load 1.5 kW Horizontal milling table length 800 mm width 240 mm Distance vertical spindle - milling table max. 420 mm T-slots size 14 mm T-slots number 3 T-slots distance 80 mm Standards and approvals Standard DIN EN 55011 EMC class C2 Travel X-A