Used Tightening Bolts for sale (1,873)

Condition: excellent (used), Year of construction: 2016, LAMELLA – CASE CLAMP PRESS GANNOMAT “CONCEPT 70 ECO” Complete in standard configuration including: - Sturdy, torsion-resistant steel frame, constructed with welded and bolted assemblies - UPPER lamella pressure beam with 6 elements, SIDE lamella pressure beam with 5 elements - Lamella pressure beams feature the tried-and-tested tolerance compensation system (Ganner system) for tightly pressed carcass joints - Counter-pressure surfaces (side pressure wall, bottom) are 38 mm thick, coated, continuous support plates - Continuous pressing surface with a height of 95 mm on the lower vertical pressure beam - Electromotive adjustment of both pressure beams via precision trapezoidal thread spindles (with increased pitch and concentricity accuracy) and high-performance lead nuts with grease reservoir - Clamping is electromotor-driven, with two separate worm gear motors (2 x 0.75 kW) - The pressing force of the pressure beams is continuously adjustable electronically using two potentiometers and regulated via frequency inverters, providing a completely wear-free press force control - Pressing force for horizontal beam: min. 500 daN (kg) up to stepless max. 2200 daN (kg) Pressing force for vertical beam: min. 300 daN (kg) up to stepless max. 2200 daN (kg) - Press and adjustment speeds of the pressure beams with fine positioning, switchable via 3-stage selector: 5 / 10 / 25 mm/sec - Extremely user-friendly operation - Working height/loading height: 300 mm - Working dimensions: Length min: 150 mm, max: 2500 mm; Height min: 150 mm, max: 1400 mm; Depth: 700 mm - Machine No. 563.624 - 400V, 3Ph, 50Hz (3.2 kVA, 16 A) Set of machine feet for 500 mm working height Operating manual in German Overhauled by Ganner, with 6-month parts warranty Hsdpjw Td A Ijfx Afijfn Location: ex stock 54634 Bitburg - Immediately available -

Condition: used, Year of construction: 2024, operating hours: 934 h, 2024 | Liebherr R998 LC-V | Used Demolition Excavator | 934 hours 📍Location: Germany, Sindelfingen 🚛 Delivery available to your destination – Use our shipping calculator to estimate transport costs! 💰 Buy Now for EUR 898000 or Make an Offer. Payment at delivery available for an affordable fee (subject to approval)* 👷‍♂️ Inspected by an independent expert 68 inspection points 63 approved ✅ 4 imperfect ℹ️ 1 issues ⚠️ 📌 Inspector's Comment: Well-functioning and neat Liebherr 998, low hours but has already done some work, swing brake not entirely optimal anymore, also the hydraulic pump makes a singing sound, hydraulic level very low, left stick cylinder leaks, machine could use a cleaning, and the tracks may need some tightening, other than a few scratches and dents still a neat excavator. 📄 Want to see the full inspection, extra photos, or a video? Tip: The reference "38272 Equippo" is commonly used when looking up more details online. 💡 Why this machine and our service stands out: ✔ Thorough inspection by professionals ✔ Jobsite delivery available ✔ Money-Back Guaranteed ✔ Secure and flexible payment options Hsdpfxexnff Eo Afiefn 🔄 Considering other equipment options? We offer helpful tools and resources for all equipment owners and operators – easily accessible on our platform.

Year of construction: 2025, condition: new, New machine Year of manufacture: 2025 Features and technical specifications: Fully equipped in standard version with: - Robust, torsion-free steel frame, welded and bolted construction - Lamella pressure beam TOP with 6 elements, lamella pressure beam SIDE with 5 elements - Lamella pressure beams with proven tolerance compensation system (Ganner system) for tightly compressed carcass joints - Counter-pressure surfaces (side pressure wall, base) are 38 mm thick, coated, continuous support plates - Continuous pressing surface, height 95 mm, on lower vertical pressure beam - Electromechanical adjustment of both pressure beams via precision trapezoidal thread spindles (with increased lead and concentricity accuracy) and high-performance ball nuts with grease reservoir - The pressing process is carried out electromotorically, via 2 independent worm gear motors (2 x 0.75 kW) - Pressing force of the pressure beams is infinitely variable and electronically controlled by 2 potentiometers, regulated via frequency inverter, ensuring absolutely wear-free force control - Pressing force for horizontal pressure beam: min. 500 daN (kg), infinitely adjustable up to max. 2200 daN (kg) - Pressing force for vertical pressure beam: min. 300 daN (kg), infinitely adjustable up to max. 2200 daN (kg) Hfsdpfx Afow Nafkeijn - Pressing and adjustment speed of the beams with fine positioning, using 3-stage selector switch: 5 / 10 / 25 mm/second - Jog mode for precise positioning of both pressure beams, e.g. for low pressing forces, drawers, and carcasses at 45° - Simplest operation via 6 separate push buttons, 8 movement cycles selectable via control panel - Freely adjustable press time preselection 0-30 min (switchable to seconds or hours), with individually programmable opening dimensions for both pressure beams - Re-pressing function to increase or decrease the pressing force during the pressing process - Working height/loading height: 300 mm - Working dimensions: Length min: 150 mm, max: 2500 mm; Height min: 150 mm, max: 1400 mm; Depth: 700 mm Including surcharge for rapid traverse speed, for fast positioning of the pressure beams, controlled via automatic workpiece detection with sensors in the pressure beams, pressing speeds 5 / 10 / 25 mm/sec and rapid traverse speed 50 mm/sec, the sensors can be deactivated for pressing special components Including a set of machine feet for 500 mm working height Location: Flörsheim Availability: Short-term

Condition: used, Year of construction: 2012, machine/vehicle number: 6820413, Brush edge grinding machine - Manufacturer: MB-Maschinenbau - Type ROBA-Duplex Hfsdpfx Aew H Rnrofijn - Year of manufacture 2012 - Working height ~ 900 mm - Machine frame consists of a welded and bolted steel welded construction - Pneumatic height adjustment of the grinding unit - Large air cushion table - Work table can be swiveled and moved horizontally - Brush belt grinding unit Working length: approx. 1100 mm - Working height: 200 mm or 2 x 100 mm - Holders for abrasives, 138 pieces - Grinding belt blow-off - Electric grinding belt control - Oscillation for the grinding belt - Possible grinding attachment heights 30/45/60 mm - Grinding belt speed approx. 60 - 230 m/min. - Length ~ 2,400 mm - Width ~ 1,160 mm - Height ~ 1,100 mm - Weight approx. 450 kg

Condition: used, Used carbon steel grinding mill by Pallmann (Germany) model PR8. Mill has bolted rotor with diameter 795 mm and stator with diameter 800 mm. Belt driven by el. motor 100 kW, 1480 rpm, 380 V, 50 hz. Manual adjustment of gap between milling plates. Mill has mounted 5 nozzles for feeding gas or liquid inside the milling chamber. Front door bolted with central feeding inlet through feeding chute. Bottom discharge. Hfjdpfsxm T H Iox Afijn

Condition: excellent (used), Centrifugal pump, high pressure pump, water pump, multi-stage vertical centrifugal pump, booster pump, pressure intensifier pump, high pressure centrifugal pump -Manufacturer: Lowara, high-pressure centrifugal pump type SV809F40T -Engine power: 4 kW -Flow rate: 6 - 14 m³/h -Head: 112 - 60 m -Pipe connection Ø 38 mm / bolt circle 106 mm see photos Hodpov Aumrefx Afiefn -Dimensions: 285/245/H950 mm -Weight: 48 kg.

Condition: like new (used), Year of construction: 2018, Panhans Mortising Machine Type: 116/10 - Max. drilling depth: 145 mm - Max. drilling length: 240 mm - Height adjustment: 135 mm - Extraction nozzle diameter: 100 mm - Color: RAL 7035 Light Grey, RAL 5000 Violet Blue - Net weight approx. 200 kg Robust German engineering Professional long-hole mortising and precise dowel drilling Fixed table, smooth-running mobile drill motor Mobility kit for increased flexibility Hodpfx Afsxgu Tvjijfn Cast iron table 700 x 380 mm, thick-walled and highly ribbed Smooth, backlash-free cross-slide with adjustable ball guides for lateral and depth adjustment Height adjustment via handwheel and scale, drilling depth stop via scale, drilling length restriction via adjustable side stops left and right Drill motor output 1.3 kW/1.8 HP with motor brake and convenient tool tray Including emergency stop button High-precision three-jaw drill chuck, clamping range 5 – 20 mm Dowel drilling system for row drilling with indexing roller: 16, 22, 25, and 32 mm, high-precision machined indexing, fixing via spring-loaded indexing bolt Detachable frame stop with index pin for positions: center, left, right CE-compliant GS certified Including additional special accessories: - Single-lever operation - Handwheel with dial gauge Location: ex stock 54634 Bitburg - Immediately available -

Condition: used, Year of construction: 2017, operating hours: 8,562 h, 2017 | Hyundai HX300 NL with a bucket and ripper | Used Tracked Excavator | 8562 hours 📍Location: France, Saint-Laurent-de-Mure 🚛 Delivery available to your destination – Use our shipping calculator to estimate transport costs! Hfsdpfsxnff Sjx Afijn 💰 Buy Now for EUR 49800 or Make an Offer. Payment at delivery available for an affordable fee (subject to approval)* 👷‍♂️ Inspected by an independent expert 68 inspection points 48 approved ✅ 16 imperfect ℹ️ 4 issues ⚠️ 📌 Inspector's Comment: Well-used excavator, undercarriage needs to be tightened. Hydraulic oil pump is making a grinding noise, hydraulic oil level low, swing brake is not functioning properly anymore, a lot of play in boom pin, minor coolant leakage at the vent valve, the pressure system does not build up sufficient pressure, otherwise an operational machine. 📄 Want to see the full inspection, extra photos, or a video? Tip: The reference "39020 Equippo" is commonly used when looking up more details online. 💡 Why this machine and our service stands out: ✔ Thorough inspection by professionals ✔ Jobsite delivery available ✔ Money-Back Guaranteed ✔ Secure and flexible payment options 🔄 Considering other equipment options? We offer helpful tools and resources for all equipment owners and operators – easily accessible on our platform.

Condition: used, overall weight: 48,000 kg, maximum load weight: 38,000 kg, axle configuration: 3 axles, loading space length: 12,630 mm, loading space width: 2,550 mm, loading space height: 870 mm, first registration: 08/2022, next inspection (TÜV): 04/2026, Year of construction: 2022, total width: 2,550 mm, total height: 870 mm, Equipment: ABS, 3-axle semi-low loader HUMBAUR HTS30K with excavator boom trough First registered August 2022, like new condition Dimensions (L x W x H) 12,630 x 2,540 x 870 mm Drive-on angle approx. 10° Lowbed length 8,680 mm Highbed length 3,500 mm Fifth wheel height approx. 1,200 mm Unladen weight 10,370 kg Kingpin adjustable by 340 mm for 2+3 axle tractors Hfedpsxmpxaefx Afijn Single-piece galvanized ramps with rubber coating, length 3,150 mm, width 750 mm Ramps hydraulically foldable and movable (dual-circuit hydraulics required from the tractor) 5 pairs of stake pockets and ramp rails Extra-wide package with quadruple warning signs, with folding outriggers and spruce planks Steel toolbox under the left loading area for storing the planks Hydraulic rear support Load securing: 5 pairs of 10-ton lashing rings in the low bed 5 pairs of 6-ton lashing rings in the outer frame, bolted 3 pairs of 6-ton lashing rings in the high bed 6 pairs of 2-ton lashing rings above the outer frame wheel cutout 3 pairs of 3-ton lashing rings in the low bed outer frame Chassis frame hot-dip galvanized, visible sides painted SAF axles with drum brakes 1st axle: LIFT AXLE 3rd axle: SELF-STEERING WABCO Trailer EBS WABCO Smartboard 12 tires: 235/75 R 17.5, tread depth 80% RENTING is the new BUYING, also available from us as a RENT or Full-Service LEASE immediately-----

Condition: new, mileage: 12 km, fuel type: gasoline, gearing type: other, overall weight: 7,490 kg, emission class: none, color: grey, driver cabin: day cab, suspension: other, Equipment: crane, - For sale: a loader crane for truck mounting Loader crane: equipped with 3 hydraulic extensions + mechanical extension (Country of manufacture: Italy) - Lifting capacity according to manufacturer: Max. 995 kg; 3.2 m = 815 kg, 4.40 m = 575 kg, 5.60 m = 400 kg, 6.80 m = 300 kg, 8.05 m = 220 kg - Built according to CE directive (EN 12999) – Slew range 370° (slew range limitation 190°) - All hydraulic cylinders double-acting - Piston rods hard-chromed - Pressure relief and load-holding valves - Emergency stop - Control block with 5 control valves - Separate hydraulic tank (33 l) with filter, mounted on crane base - Outriggers extendable on both sides, special outrigger system, outrigger width 3.10 m - Hydraulic outriggers swiveling 30° and 180° – CE compliant, incl. M.O.L. - Special paint finish RAL 7016 – all cylinders painted black - Load hook and mounting clamps - Vehicle voltage 12V - Radio remote control with 6 functions - Electronic modules for Danfoss S800 control block, 4 functions - Danfoss S800 control block, 5 functions, incl. high-pressure filter - Special outrigger system, outrigger width 3.10 m, 1 unit Hfjdpfxjxcfz Aj Afijn - Surcharge for shortened stabilizer legs by 80 mm - Mechanical jib N – lift 1.30 m (7.0 k) – surcharge for stainless steel bolts and stainless steel pipe clamps - Surcharge for Dinitrol application (cavity protection) - Zinc primer ... VAT can be shown, cab: local sale, crane, new, hydraulics, consumption: 0.0/0.0/0.0 l/100 km (combined/urban/extra-urban)

Condition: used, overall weight: 219,000 kg, maximum load weight: 175,620 kg, axle configuration: > 3 axles, first registration: 01/2002, Equipment: ABS, STHP 8 (3 + 5) 8 units of hydraulic BWP pendulum axle assemblies with remote control. Technically permissible gross weight 219,000 kg Technically permissible payload 175,620 kg Hydraulically suspended, 8-axle steered Goldhofer low-bed heavy-duty trailer type STHP 8 (3+5), consisting of 4 heavy-duty modules with a detachable gooseneck and extendable excavator low-bed section up to 5 meters, featuring 4 wheel recesses, ABS, technically permissible payload up to 175,620 kg. Consisting of the following 4 separate heavy-duty module parts: 1st module: Hydraulic universal gooseneck type STH/ST Year of manufacture: 2002 Can be combined with heavy-duty module undercarriages, drivable loading platforms. Unladen weight approx. 5,900 kg Permissible front fifth wheel load: 35,000 kg Length approx. 4.10 m Fifth wheel height approx. 1.30 m King pin 3.5" pin Removable aluminum side walls Fully hydraulically adjustable 2nd module: Goldhofer THP/ST3 3-axle heavy-duty module First registration: 14.11.2001 As a single module, technically permissible total weight: 108,000 kg, technically permissible axle loads: 36,000 kg at 5 km/h possible. Unladen weight: 10,350 kg As a single module, technical payload up to 97,650 kg at 5 km/h possible. 8 hydraulic pendulum axles, 24 wheels, tire size: 215/75/R17.5 Axle load: 25 t at 20 km/h Vehicle width: 3 meters Axle spacing: 1.5 meters Max. steering angle: ±60° Integrated into chassis: hydromechanical dual-circuit all-wheel forced steering with a maximum aggregate steering angle of 60°, integrated hydraulic oil tank Optimized bolt-lug coupling at front and rear for longitudinal combinations Single-tired pendulum axle assemblies with a total of 8 wheels per axle line Hydraulic axle compensation +/- 300 mm, hydropneumatic gas pressure suspension Hydraulic steering for all axles BPW axles with drum brake and ABS, technically permissible axle load of 34 t at 5 km/h 3rd module: Extendable low-bed heavy-duty module - Excavator bridge Year of manufacture: 2002 Internal dimensions approx. 7.50 meters long, 3.00 meters wide, loading height 0.40 meters Construction height 350 mm Extendable by approx. 5.00 meters - telescopic 4 wheel recesses with drive-on module at the front Construction height in wheel recess area approx. 150 mm Load capacity up to 80 t in low-bed and 175.6 t in overall STHP8 (3+5) module possible. Unladen weight 11,900 kg Front and rear hydraulic bolt-lug coupling with claw coupling adapter 4th module: Goldhofer THP/ET5 5-axle heavy-duty module First registration: 04.01.2002 Technically permissible total weight: 115,000 kg, technically permissible axle loads 23,000 kg at 5 km/h possible Unladen weight: 14,200 kg Technical payload up to 100,800 kg possible. Single-tired hydraulic pendulum axle assemblies with 4 wheels per axle line, 20 wheels (tire size 285/70 R 19.5) Hydraulic axle compensation +/- 300 mm, hydropneumatic gas pressure suspension Hydraulic steering for all axles Remote control for steering axles 5. Notes: With the 4 heavy-duty modules, up to 3 different tractor combinations are possible! Payloads change depending on the configuration. For the special low-bed combination, a current manufacturer's certificate from Goldhofer is available. The low-bed trailer can be tested at our facility. Price NET excluding 19% VAT. All information without guarantee. Subject to errors and prior sale. Internal vehicle number: 2285 Hfjdpfx Aexcdf Hofien

Condition: used, overall weight: 39,000 kg, empty load weight: 7,394 kg, axle configuration: 3 axles, loading space length: 13,625 mm, loading space width: 2,480 mm, loading space height: 2,700 mm, loading space volume: 91 m³, first registration: 04/2024, suspension: air, color: white, tire size: 385/65 R22,5, Year of construction: 2024, mileage: 60,116 km, Equipment: ABS, Empty weight: 7,394 kg, permissible gross weight: 39,000 kg, DIN EN 12642 (Code XL) certificate, cargo space (L W H): 13,625 mm x 2,480 mm x 2,700 mm, tire size: 385/65 R22.5, cargo space volume: 91 m³, 1st axle: , 2nd axle: , 3rd axle: , air suspension, underride guard, electronic braking system (EBS), toolbox, spare wheel holder (2x), bolted chassis, connection plugs 1x15 and 2x7 pin, antispray, You can find our full range of vehicles at . Financing required? With our Value Added Service, we offer you individual financing options, full service, and telematics services. We are happy to advise you. Hedpfx Asxn D T Usfisfn

Condition: new, Year of construction: 2025, Hebrock F 4 For complete processing of your panels For all those who don't want to do things by halves. With the F 4, we offer you a model with which you can produce fully processed edges on a machine length of just 4 m. The F 4 is not only space-saving, but also extremely attractive in terms of price-performance ratio. Max. Edge thickness 3 mm Min/Max. Workpiece thickness 8 - 50 mm Min. workpiece length approx. 160 mm Feed speed approx. 7 m/min. Ready for operation approx. 3.5 min. Max. Power consumption Ø approx. 7.4 kW Electrical connection 400 V - 3 Ph - 50 Hz Work table height approx. 900 mm Machine dimensions approx. 4050 x 1300 x 1400 mm (LxWxH) Weight approx. 820 kg Suction nozzle Ø 1 x 140 mm PLC control 10″ touchscreen Top-mounted rapid-heat adhesive container (maintenance-free) Support plate for edging material Automatic central lubrication (cross-cut saw, corner router) Visual display for workpiece sequence Extension arm (can be pulled out to the front) Interchangeable basin pre-equipment incl. adhesive changing device for PUR processing Surface scraper with dual tracing Pneumatic roller capping (scissor cut design, Hebrock system) Double roller top pressure (ball bearing) Hedjhqadcopfx Afijfn Transport chain with bolted special chain plates Jointing cutter Milling unit cross-cut saw Corner cutter Accessories: F4/09 Radius scraper (incl. pneumatic lift) F4/09/4 Multi radius scraper (R1/R2) F4/30 Pneumatic 3-point adjustment Location: From stock 54634 Bitburg - available at short notice -

Condition: used, Year of construction: 2015, operating hours: 3,602 h, 2015 | JLG 450AJ (16m) | Used Articulated Boom Lift | 3602 hours 📍Location: France, Illange 🚛 Delivery available to your destination – Use our shipping calculator to estimate transport costs! 💰 Buy Now for EUR 16200 or Make an Offer. Payment at delivery available for an affordable fee (subject to approval)* 👷‍♂️ Inspected by an independent expert 54 inspection points 48 approved ✅ 6 imperfect ℹ️ 0 issues ⚠️ 📌 Inspector's Comment: Play on left steering linkage ( 4 bolts from steeringpoint missing ) steers and operates OK, all Operations work during inspection , Some cracks in hood 📄 Want to see the full inspection, extra photos, or a video? Tip: The reference "39705 Equippo" is commonly used when looking up more details online. 💡 Why this machine and our service stands out: ✔ Thorough inspection by professionals ✔ Jobsite delivery available ✔ Money-Back Guaranteed ✔ Secure and flexible payment options Hodpfxexnc Hyj Afisfn 🔄 Considering other equipment options? We offer helpful tools and resources for all equipment owners and operators – easily accessible on our platform.

Condition: used, mileage: 479,800 km, power: 290 kW (394.29 HP), first registration: 02/2019, overall weight: 26,000 kg, fuel type: diesel, color: white, axle configuration: 3 axles, next inspection (TÜV): 01/2026, brakes: retarder, gearing type: automatic, emission class: euro6, loading space width: 2,490 mm, loading space length: 7,400 mm, loading space height: 2,350 mm, Equipment: ABS, air conditioning, electronic stability program (ESP), parking heater, tail-lift, * Special equipment: * Refrigerated box body by Rohr for fresh food service * Mitsubishi refrigeration unit with engine drive * Retarder * Auxiliary heater * Air conditioning * Reversing camera * 1 folding bunk * Adaptive cruise control * Lane keeping assist * Stability control assist * Attention assist * Blind spot assist * Active Brake Assist 4 * High Performance Engine Brake * Wheelbase: 4600 mm * Axle load measuring system * Front axle load: 8.0 t * Driver’s side airbag * Trailer brake, 2-line system * Audio system: CD radio (Bluetooth) * Battery: 220 Ah * Compressed air connection in cab * AdBlue tank: 75 l * Info display 12.7 cm with supplementary display * Front engine PTO for Mitsubishi refrigeration unit * Reinforced engine brake * Steerable and liftable trailing axle * Tail lift switch * Reinforced rear cross member * Trailer coupling for central axle trailer * 50 mm bolt trailer coupling * Fleet management system interface * Cab seats: Armrest passenger seat Hsdpfx Asxn D Hujfijfn * Comfort driver's air-suspended seat * Folding driver’s seat backrest * Exterior sun visor * Sun protection roller blind, driver’s door side window * 12V socket in passenger footwell * Additional 24V socket in passenger footwell * Preparation for second control unit for level control * Additional heater (water) * Emission standard EURO 6 OBD-C * Axle configuration: 6x2/4 * Trailer socket 24V / 15-pin * Model series: Antos * Exhaust to the right side * Exterior mirrors electric adjustable and heated * Rear axle differential lock * Cab width: 2.30 m * Cab tilting hydraulics * Cabin: M ClassicSpace * Cab floor with 320 mm engine tunnel * Suspension: Air / Air (full air suspension) * Electric window lifts * Tinted windscreen * 12-speed gearbox - G211-12, Power Shift * Manual roof hatch (steel) * Central locking system * Fuel tank: 500 l aluminum * Engine: 10.7 l - 290 kW inline 6 diesel (OM 470) * Ramp mirror * Disc brakes on front and rear axles * Front axle stabilizer * Rear and trailing axle stabilizer * 24V cab socket * Tachograph / EC control unit * Aerodynamically designed underbody paneling * Front underrun protection * Preparation for toll recording * Permissible total weight: 26.00 t * Subject to error, changes, and prior sale

Condition: used, axle configuration: > 3 axles, overall weight: 219,000 kg, maximum load weight: 175,620 kg, first registration: 01/2002, Equipment: ABS, STHP 8 (3 + 5) 8 units of hydraulic BWP pendulum axle assemblies with remote control. Technically permissible gross weight 219,000 kg Technically permissible payload 175,620 kg Hydraulically suspended, 8-axle steered Goldhofer low-bed heavy-duty trailer type STHP 8 (3+5), consisting of 4 heavy-duty modules with a detachable gooseneck and extendable excavator low-bed section up to 5 meters, featuring 4 wheel recesses, ABS, technically permissible payload up to 175,620 kg. Consisting of the following 4 separate heavy-duty module parts: 1st module: Hydraulic universal gooseneck type STH/ST Year of manufacture: 2002 Can be combined with heavy-duty module undercarriages, drivable loading platforms. Unladen weight approx. 5,900 kg Permissible front fifth wheel load: 35,000 kg Length approx. 4.10 m Fifth wheel height approx. 1.30 m King pin 3.5" pin Removable aluminum side walls Fully hydraulically adjustable 2nd module: Goldhofer THP/ST3 3-axle heavy-duty module First registration: 14.11.2001 As a single module, technically permissible total weight: 108,000 kg, technically permissible axle loads: 36,000 kg at 5 km/h possible. Unladen weight: 10,350 kg As a single module, technical payload up to 97,650 kg at 5 km/h possible. 8 hydraulic pendulum axles, 24 wheels, tire size: 215/75/R17.5 Axle load: 25 t at 20 km/h Vehicle width: 3 meters Axle spacing: 1.5 meters Max. steering angle: ±60° Integrated into chassis: hydromechanical dual-circuit all-wheel forced steering with a maximum aggregate steering angle of 60°, integrated hydraulic oil tank Optimized bolt-lug coupling at front and rear for longitudinal combinations Single-tired pendulum axle assemblies with a total of 8 wheels per axle line Hydraulic axle compensation +/- 300 mm, hydropneumatic gas pressure suspension Hydraulic steering for all axles BPW axles with drum brake and ABS, technically permissible axle load of 34 t at 5 km/h 3rd module: Extendable low-bed heavy-duty module - Excavator bridge Year of manufacture: 2002 Internal dimensions approx. 7.50 meters long, 3.00 meters wide, loading height 0.40 meters Construction height 350 mm Extendable by approx. 5.00 meters - telescopic 4 wheel recesses with drive-on module at the front Construction height in wheel recess area approx. 150 mm Load capacity up to 80 t in low-bed and 175.6 t in overall STHP8 (3+5) module possible. Unladen weight 11,900 kg Front and rear hydraulic bolt-lug coupling with claw coupling adapter 4th module: Goldhofer THP/ET5 5-axle heavy-duty module First registration: 04.01.2002 Technically permissible total weight: 115,000 kg, technically permissible axle loads 23,000 kg at 5 km/h possible Unladen weight: 14,200 kg Technical payload up to 100,800 kg possible. Single-tired hydraulic pendulum axle assemblies with 4 wheels per axle line, 20 wheels (tire size 285/70 R 19.5) Hydraulic axle compensation +/- 300 mm, hydropneumatic gas pressure suspension Hydraulic steering for all axles Remote control for steering axles 5. Notes: With the 4 heavy-duty modules, up to 3 different tractor combinations are possible! Payloads change depending on the configuration. For the special low-bed combination, a current manufacturer's certificate from Goldhofer is available. The low-bed trailer can be tested at our facility. Price NET excluding 19% VAT. All information without guarantee. Subject to errors and prior sale. Internal vehicle number: 2285 Hjdpfxoxcdg De Afiofn

Condition: used, overall weight: 36,000 kg, empty load weight: 8,418 kg, axle configuration: 3 axles, loading space length: 13,403 mm, loading space width: 2,490 mm, loading space height: 2,650 mm, loading space volume: 88 m³, first registration: 03/2021, next inspection (TÜV): 01/2026, suspension: air, color: white, tire size: 385/65 R22,5, Year of construction: 2021, mileage: 273,732 km, Equipment: ABS, Unladen weight: 8,418 kg, permissible total weight: 36,000 kg, certified load securing, cargo space (L x W x H): 13,403 mm x 2,490 mm x 2,650 mm. Tire size: 385/65 R22.5, DIN EN 12642 (Code XL) certificate, cargo space volume: 88 m³, 1st axle: , 2nd axle: , 3rd axle: , air suspension, underride guard, electronic braking system (EBS), two spare wheel holders, bolted chassis, double-deck EURO pallet system with beams, hubodometer, connectors 1x15-pin and 2x7-pin, antispray, international customs seal, telematics system. Find our complete vehicle portfolio on our website. Interested in financing? With our Value Added Service, we offer customized financing options, full-service and telematics solutions. We are happy to advise you. Hsdpfxew N Tlqe Afijfn

Condition: new, Year of construction: 2024, Panhans long hole drilling machine type: 116/10 -Drilling depth max. 145 mm -Drilling length max. 240 mm -Height adjustment 135 mm -Suction nozzle ø 100 mm -ColorRAL 7035 light greyRAL 5000 violet blue -Net weight approx. 200 kg Solid German mechanical engineering Hjdjr Eli Tjpfx Afisfn Professional slot milling and precise dowel drilling Fixed table, smooth-running mobile drill motor Travel mechanism for greater mobility Cast iron table 700 x 380 mm thick-walled and highly ribbed Smooth-running cross support with adjustable ball guides for lateral and depth adjustment Height adjustment via handwheel and scale, drilling depth stop via scale, drilling length limit adjustable via side stops left and right Drill motor output 1.3 kW/1.8 hp with motor brake and practical tool tray Incl. emergency stop button High-precision three-jaw drill chuck, clamping range 5 - 20 mm Dowel drilling device for drilling holes in rows with 16, 22, 25 and 32 mm raster roller High-precision milled raster, fixed via spring-loaded raster bolt Plug-in frame stop with index bolt for the positions: center, left, right CE-compliant GS tested Incl. additional special accessories: - Single lever operation - Handwheel with dial gauge Location: ex stock 54634 Bitburg - immediately available -

Condition: used, mileage: 128,689 km, power: 338 kW (459.55 HP), gearing type: automatic, fuel type: diesel, color: white, overall weight: 26,000 kg, axle configuration: 3 axles, first registration: 08/2019, emission class: euro6, loading space length: 4,900 mm, loading space width: 2,380 mm, loading space height: 800 mm, Equipment: ABS, air conditioning, electronic stability program (ESP), Well-maintained MAN TGS 26.460 BB 6x4 with Meiller three-way tipper and on-board system, 6x4 drive, differential locks on rear axle, wheelbase 3.30 m, 460 HP, permissible total weight 33 tonnes technically possible, NL 13.7 tonnes, automatic air conditioning, trailer hitch with 50 bolts, trailer tipping hydraulics, and much more. Total weight 28,000 kg technically Total weight 33,000 kg possible Empty weight 12,234 kg according to certificate Payload 13,766 kg at 26,000 kg GG Payload 15,766 kg at 28,000 kg GG technically Payload 20,766 kg at 33,000 kg GG possible Driver's cab medium length M Engine D2676LF52 - 460 HP / 338 KW EURO6 SCR - 2300 Nm C-R OBD-C Drive 6 x 4 Wheelbase 3,300 mm, 800 mm overhang frame rear Differential locks in rear axles Meiller 3-way tipper approx. 4.90 m x 2.38 m x 0.80 m high On-board system left Side walls in M-JET design VS100 - 4mm Bridge floor VS120 - 5 mm Rear wall swinging with automatic lock Automatic transmission MAN TipMatic 12.28OD N-output NTX/10c without flange f=0.96 above Gearbox function rocking free MAN EasyStart MAN BrakeMatic ABS, ASR, ESP EVBec rocker lever brake Front and rear axles leaf-sprung Front axle VO-09 straight, rear axle AP HPD-1353/HP-133 Stabilizer on front and rear axles Axle ratio i=3.63 Tow bar Maul Ringfeder 5050 A with 50er bolt Doumatic connections at the rear Tipping hydraulic connection at the rear for 3-way tipping trailer Trailing load central axle trailer 18,000 kg possible Trailing load turntable trailer 30,000 kg possible Total train weight 50,000 kg possible Hedpfxswnlcmo Afisfn Cruise control Automatic climate control Sun visor Work lights Exhaust system raised Electrically adjustable and heated exterior mirrors Electr. Window lifter Driver's comfort seat with air suspension and heating and with lumbar support and shoulder adjustment Comfort seat covers MAN Media Truck 12 V radio with 5" color display Hands-free functionality for 1 mobile phone (MFL and Bluetooth® capable) New German vehicle from 1st owner Very good and well-maintained condition Net price plus 19% VAT. We would be happy to send you attractive financing offers. All information without guarantee. Errors and prior sale reserved. Internal vehicle number: 2527

Condition: new, Year of construction: 2025, FLAT PANEL CASE CLAMP GANNOMAT "CONCEPT 70 EASY 170" Fully equipped in standard configuration with: - Sturdy, torsion-resistant steel frame made with welded and bolted construction - Lateral pressing beam with continuous pressure surface, equipped with a 25 mm thick coated support plate - Counter-pressure surfaces (side pressure wall, base) are continuous, 25 mm thick coated support plates - Electromotoric adjustment of the pressing beam via precision trapezoidal threaded spindles (with increased pitch and concentric accuracy) and high-performance carriage nuts with grease reservoir - Pressing is performed by electromotor via worm gear motor (0.75 kW) - The pressing force of the pressing beam is infinitely variable and electronically set via potentiometer, regulated by frequency converter, allowing completely wear-free pressure force control - Pressing force for vertical pressing beam: min. 300 daN (kg) up to stepless max. 2200 daN (kg) - Pressing and adjustment speed of the pressing beams with fine positioning, via 3-stage selector switch: 5 / 10 / 25 mm per second - Jog mode for precise positioning of the pressing beam, e.g. for low pressing forces such as drawers, etc. - Extremely simple operation via two separate pushbuttons; two motion sequences (open/close) can be selected via controller - Freely adjustable pressing time preselection 0–30 min (switchable to seconds or hours), with individually programmable opening dimensions for both pressing beams - Re-pressing function to increase or decrease the pressing force during the pressing process - Working height/loading height: 200 mm - Working dimensions: Length min: 150 mm, max: 1300 mm Hfsdpfxsw Sgnkj Afijn Height min: 150 mm, max: 1700 mm Depth: 700 mm Electrical connection: 400 Volt, 50 Hz, 16 A Available: at short notice

Condition: used, mileage: 128,689 km, power: 338 kW (459.55 HP), first registration: 08/2019, overall weight: 26,000 kg, fuel type: diesel, color: white, axle configuration: 3 axles, gearing type: automatic, emission class: euro6, loading space width: 2,380 mm, loading space length: 4,900 mm, loading space height: 800 mm, Equipment: ABS, air conditioning, electronic stability program (ESP), Well-maintained MAN TGS 26.460 BB 6x4 with Meiller three-way tipper and on-board system, 6x4 drive, differential locks on rear axle, wheelbase 3.30 m, 460 HP, permissible total weight 33 tonnes technically possible, NL 13.7 tonnes, automatic air conditioning, trailer hitch with 50 bolts, trailer tipping hydraulics, and much more. Total weight 28,000 kg technically Total weight 33,000 kg possible Empty weight 12,234 kg according to certificate Payload 13,766 kg at 26,000 kg GG Payload 15,766 kg at 28,000 kg GG technically Payload 20,766 kg at 33,000 kg GG possible Driver's cab medium length M Engine D2676LF52 - 460 HP / 338 KW EURO6 SCR - 2300 Nm C-R OBD-C Drive 6 x 4 Wheelbase 3,300 mm, 800 mm overhang frame rear Differential locks in rear axles Meiller 3-way tipper approx. 4.90 m x 2.38 m x 0.80 m high On-board system left Side walls in M-JET design VS100 - 4mm Bridge floor VS120 - 5 mm Rear wall swinging with automatic lock Hfsdpfx Aewnlcgjfien Automatic transmission MAN TipMatic 12.28OD N-output NTX/10c without flange f=0.96 above Gearbox function rocking free MAN EasyStart MAN BrakeMatic ABS, ASR, ESP EVBec rocker lever brake Front and rear axles leaf-sprung Front axle VO-09 straight, rear axle AP HPD-1353/HP-133 Stabilizer on front and rear axles Axle ratio i=3.63 Tow bar Maul Ringfeder 5050 A with 50er bolt Doumatic connections at the rear Tipping hydraulic connection at the rear for 3-way tipping trailer Trailing load central axle trailer 18,000 kg possible Trailing load turntable trailer 30,000 kg possible Total train weight 50,000 kg possible Cruise control Automatic climate control Sun visor Work lights Exhaust system raised Electrically adjustable and heated exterior mirrors Electr. Window lifter Driver's comfort seat with air suspension and heating and with lumbar support and shoulder adjustment Comfort seat covers MAN Media Truck 12 V radio with 5" color display Hands-free functionality for 1 mobile phone (MFL and Bluetooth® capable) New German vehicle from 1st owner Very good and well-maintained condition Net price plus 19% VAT. We would be happy to send you attractive financing offers. All information without guarantee. Errors and prior sale reserved. Internal vehicle number: 2527

Condition: used, overall weight: 219,000 kg, maximum load weight: 175,620 kg, axle configuration: > 3 axles, first registration: 01/2002, Equipment: ABS, STHP 8 (3 + 5) 8-piece hydraulic BWP pendulum axle units with radio remote control. Total weight technically possible: 219,000 kg Payload technically possible: 175,620 kg Hydraulically suspended and 8-axle steerable Goldhofer low-bed low-loader type STHP 8 (3+5) consisting of 4 heavy-duty modules with a detachable gooseneck and up to 5-meter-long telescopic excavator low-bed with 4 wheel recesses with ABS up to 175,620 kg payload technically possible. Consisting of the following 4 separate heavy-duty module parts: 1st Module: Hydraulic universal gooseneck type STH / ST Year of manufacture 2002 Can be combined with heavy-duty module chassis, with drive-over loading bridges. Empty weight approx. 5,900 kg Permissible fifth-wheel load front 35,000 kg Length approx. 4.10 m Fifth-wheel height approx. 1.30 m King Pin 3.5" bolt Aluminum side boards plug-in Fully hydraulically adjustable 2nd Module: Goldhofer THP/ST3 3-axle heavy-duty chassis module First registration: 14.11.2001 As a single module total weight technically possible: 108,000 kg, axles technically possible load: 36,000 kg at 5 km/h possible. Empty weight: 10,350 kg As a single module technical payload up to 97,650 kg at 5 km/h possible. Hydraulic pendulum axles 8-fold, 24 x fitted with tires: 215/75/R17.5 Axle load: 25 tons at 20 km/h Vehicle width: 3 meters Axle distance: 1.5 meters Max. steering angle: ±60° Hydromechanical 2-circuit all-wheel forced steering integrated into the chassis with a maximum steering angle of the axle units of 60° with integrated hydraulic oil tank Front and rear optimized bolt-lug coupling for longitudinal combinations Single-tire pendulum axle units with a total of 8 wheels per axle line Hydraulic axle compensation +/- 300 mm, hydropneumatic gas pressure spring suspension Hydraulic steering of all axles BPW axles with drum brakes and ABS and technically possible axle load of 34 tons at 5 km/h 3rd Module: Extendable heavy-duty low-bed module - excavator bridge Year of manufacture 2002 Internal dimensions approx. 7.50 meters long, 3.00 meters wide and 0.40 meters loading height Construction height 350 mm Extendable by approx. 5.00 meters - telescopic 4 wheel recesses with ramp module in the front area Construction height in the wheel recess area approx. 150 mm Load up to 80 tons in the low-bed and 175.6 tons in the complete STHP8 (3+5) module possible. Empty weight 11,900 kg Front and rear hydraulic bolt lug coupling with claw coupling adapter 4th Module: Goldhofer THP/ET5 5-axle heavy-duty chassis module First registration: 04.01.2002 Technically possible total weight: 115,000 kg, axles technically possible load 23,000 kg at 5 km/h possible Empty weight: 14,200 kg Technical payload up to 100,800 kg possible. Single-tire hydraulic pendulum axle units with 4 wheels per axle line fitted 20x with 285/70 R 19.5 Hydraulic axle compensation +/- 300 mm, hydropneumatic gas pressure spring suspension Hydraulic steering of all axles Radio remote control for steering axles 5. Notes: With the 4 heavy-duty modules, up to 3 different pull combinations are possible! The payloads change with different pull combinations. Hfodpfx Afjxcdf Tsien A current manufacturer's certificate from Goldhofer is available for the special low-bed combination. The low-bed can be tested at our facility. Price NET plus 19% VAT. All details provided without guarantee. Subject to changes, errors and prior sale. Internal vehicle number: 2285 Advertisement als

Condition: used, overall weight: 219,000 kg, maximum load weight: 175,620 kg, axle configuration: > 3 axles, first registration: 01/2002, Equipment: ABS, STHP 8 (3 + 5) 8-piece hydraulic BWP pendulum axle units with radio remote control. Total weight technically possible: 219,000 kg Payload technically possible: 175,620 kg Hydraulically suspended and 8-axle steerable Goldhofer low-bed low-loader type STHP 8 (3+5) consisting of 4 heavy-duty modules with a detachable gooseneck and up to 5-meter-long telescopic excavator low-bed with 4 wheel recesses with ABS up to 175,620 kg payload technically possible. Consisting of the following 4 separate heavy-duty module parts: 1st Module: Hydraulic universal gooseneck type STH / ST Year of manufacture 2002 Can be combined with heavy-duty module chassis, with drive-over loading bridges. Empty weight approx. 5,900 kg Permissible fifth-wheel load front 35,000 kg Length approx. 4.10 m Fifth-wheel height approx. 1.30 m King Pin 3.5" bolt Aluminum side boards plug-in Fully hydraulically adjustable 2nd Module: Goldhofer THP/ST3 3-axle heavy-duty chassis module First registration: 14.11.2001 As a single module total weight technically possible: 108,000 kg, axles technically possible load: 36,000 kg at 5 km/h possible. Empty weight: 10,350 kg As a single module technical payload up to 97,650 kg at 5 km/h possible. Hydraulic pendulum axles 8-fold, 24 x fitted with tires: 215/75/R17.5 Axle load: 25 tons at 20 km/h Vehicle width: 3 meters Axle distance: 1.5 meters Max. steering angle: ±60° Hfodpfx Afexcdgqeion Hydromechanical 2-circuit all-wheel forced steering integrated into the chassis with a maximum steering angle of the axle units of 60° with integrated hydraulic oil tank Front and rear optimized bolt-lug coupling for longitudinal combinations Single-tire pendulum axle units with a total of 8 wheels per axle line Hydraulic axle compensation +/- 300 mm, hydropneumatic gas pressure spring suspension Hydraulic steering of all axles BPW axles with drum brakes and ABS and technically possible axle load of 34 tons at 5 km/h 3rd Module: Extendable heavy-duty low-bed module - excavator bridge Year of manufacture 2002 Internal dimensions approx. 7.50 meters long, 3.00 meters wide and 0.40 meters loading height Construction height 350 mm Extendable by approx. 5.00 meters - telescopic 4 wheel recesses with ramp module in the front area Construction height in the wheel recess area approx. 150 mm Load up to 80 tons in the low-bed and 175.6 tons in the complete STHP8 (3+5) module possible. Empty weight 11,900 kg Front and rear hydraulic bolt lug coupling with claw coupling adapter 4th Module: Goldhofer THP/ET5 5-axle heavy-duty chassis module First registration: 04.01.2002 Technically possible total weight: 115,000 kg, axles technically possible load 23,000 kg at 5 km/h possible Empty weight: 14,200 kg Technical payload up to 100,800 kg possible. Single-tire hydraulic pendulum axle units with 4 wheels per axle line fitted 20x with 285/70 R 19.5 Hydraulic axle compensation +/- 300 mm, hydropneumatic gas pressure spring suspension Hydraulic steering of all axles Radio remote control for steering axles 5. Notes: With the 4 heavy-duty modules, up to 3 different pull combinations are possible! The payloads change with different pull combinations. A current manufacturer's certificate from Goldhofer is available for the special low-bed combination. The low-bed can be tested at our facility. Price NET plus 19% VAT. All details provided without guarantee. Subject to changes, errors and prior sale. Internal vehicle number: 2285 Advertisement als

Condition: used, overall weight: 219,000 kg, maximum load weight: 175,620 kg, axle configuration: > 3 axles, first registration: 01/2002, Equipment: ABS, STHP 8 (3 + 5) 8-piece hydraulic BWP pendulum axle units with radio remote control. Total weight technically possible: 219,000 kg Payload technically possible: 175,620 kg Hydraulically suspended and 8-axle steerable Goldhofer low-bed low-loader type STHP 8 (3+5) consisting of 4 heavy-duty modules with a detachable gooseneck and up to 5-meter-long telescopic excavator low-bed with 4 wheel recesses with ABS up to 175,620 kg payload technically possible. Consisting of the following 4 separate heavy-duty module parts: 1st Module: Hydraulic universal gooseneck type STH / ST Year of manufacture 2002 Can be combined with heavy-duty module chassis, with drive-over loading bridges. Empty weight approx. 5,900 kg Permissible fifth-wheel load front 35,000 kg Length approx. 4.10 m Fifth-wheel height approx. 1.30 m King Pin 3.5" bolt Aluminum side boards plug-in Fully hydraulically adjustable 2nd Module: Goldhofer THP/ST3 3-axle heavy-duty chassis module First registration: 14.11.2001 As a single module total weight technically possible: 108,000 kg, axles technically possible load: 36,000 kg at 5 km/h possible. Empty weight: 10,350 kg As a single module technical payload up to 97,650 kg at 5 km/h possible. Hydraulic pendulum axles 8-fold, 24 x fitted with tires: 215/75/R17.5 Axle load: 25 tons at 20 km/h Vehicle width: 3 meters Axle distance: 1.5 meters Hfodoxcdfgepfx Afion Max. steering angle: ±60° Hydromechanical 2-circuit all-wheel forced steering integrated into the chassis with a maximum steering angle of the axle units of 60° with integrated hydraulic oil tank Front and rear optimized bolt-lug coupling for longitudinal combinations Single-tire pendulum axle units with a total of 8 wheels per axle line Hydraulic axle compensation +/- 300 mm, hydropneumatic gas pressure spring suspension Hydraulic steering of all axles BPW axles with drum brakes and ABS and technically possible axle load of 34 tons at 5 km/h 3rd Module: Extendable heavy-duty low-bed module - excavator bridge Year of manufacture 2002 Internal dimensions approx. 7.50 meters long, 3.00 meters wide and 0.40 meters loading height Construction height 350 mm Extendable by approx. 5.00 meters - telescopic 4 wheel recesses with ramp module in the front area Construction height in the wheel recess area approx. 150 mm Load up to 80 tons in the low-bed and 175.6 tons in the complete STHP8 (3+5) module possible. Empty weight 11,900 kg Front and rear hydraulic bolt lug coupling with claw coupling adapter 4th Module: Goldhofer THP/ET5 5-axle heavy-duty chassis module First registration: 04.01.2002 Technically possible total weight: 115,000 kg, axles technically possible load 23,000 kg at 5 km/h possible Empty weight: 14,200 kg Technical payload up to 100,800 kg possible. Single-tire hydraulic pendulum axle units with 4 wheels per axle line fitted 20x with 285/70 R 19.5 Hydraulic axle compensation +/- 300 mm, hydropneumatic gas pressure spring suspension Hydraulic steering of all axles Radio remote control for steering axles 5. Notes: With the 4 heavy-duty modules, up to 3 different pull combinations are possible! The payloads change with different pull combinations. A current manufacturer's certificate from Goldhofer is available for the special low-bed combination. The low-bed can be tested at our facility. Price NET plus 19% VAT. All details provided without guarantee. Subject to changes, errors and prior sale. Internal vehicle number: 2285 Advertisement als

Condition: used, axle configuration: > 3 axles, overall weight: 219,000 kg, maximum load weight: 175,620 kg, first registration: 01/2002, Equipment: ABS, STHP 8 (3 + 5) 8 units of hydraulic BWP pendulum axle assemblies with remote control. Technically permissible gross weight 219,000 kg Technically permissible payload 175,620 kg Hydraulically suspended, 8-axle steered Goldhofer low-bed heavy-duty trailer type STHP 8 (3+5), consisting of 4 heavy-duty modules with a detachable gooseneck and extendable excavator low-bed section up to 5 meters, featuring 4 wheel recesses, ABS, technically permissible payload up to 175,620 kg. Consisting of the following 4 separate heavy-duty module parts: 1st module: Hydraulic universal gooseneck type STH/ST Year of manufacture: 2002 Can be combined with heavy-duty module undercarriages, drivable loading platforms. Unladen weight approx. 5,900 kg Permissible front fifth wheel load: 35,000 kg Length approx. 4.10 m Fifth wheel height approx. 1.30 m King pin 3.5" pin Removable aluminum side walls Fully hydraulically adjustable 2nd module: Goldhofer THP/ST3 3-axle heavy-duty module First registration: 14.11.2001 As a single module, technically permissible total weight: 108,000 kg, technically permissible axle loads: 36,000 kg at 5 km/h possible. Unladen weight: 10,350 kg As a single module, technical payload up to 97,650 kg at 5 km/h possible. 8 hydraulic pendulum axles, 24 wheels, tire size: 215/75/R17.5 Axle load: 25 t at 20 km/h Vehicle width: 3 meters Axle spacing: 1.5 meters Max. steering angle: ±60° Integrated into chassis: hydromechanical dual-circuit all-wheel forced steering with a maximum aggregate steering angle of 60°, integrated hydraulic oil tank Optimized bolt-lug coupling at front and rear for longitudinal combinations Single-tired pendulum axle assemblies with a total of 8 wheels per axle line Hydraulic axle compensation +/- 300 mm, hydropneumatic gas pressure suspension Hydraulic steering for all axles BPW axles with drum brake and ABS, technically permissible axle load of 34 t at 5 km/h 3rd module: Extendable low-bed heavy-duty module - Excavator bridge Year of manufacture: 2002 Internal dimensions approx. 7.50 meters long, 3.00 meters wide, loading height 0.40 meters Construction height 350 mm Extendable by approx. 5.00 meters - telescopic 4 wheel recesses with drive-on module at the front Construction height in wheel recess area approx. 150 mm Load capacity up to 80 t in low-bed and 175.6 t in overall STHP8 (3+5) module possible. Unladen weight 11,900 kg Front and rear hydraulic bolt-lug coupling with claw coupling adapter 4th module: Goldhofer THP/ET5 5-axle heavy-duty module First registration: 04.01.2002 Technically permissible total weight: 115,000 kg, technically permissible axle loads 23,000 kg at 5 km/h possible Unladen weight: 14,200 kg Technical payload up to 100,800 kg possible. Single-tired hydraulic pendulum axle assemblies with 4 wheels per axle line, 20 wheels (tire size 285/70 R 19.5) Hydraulic axle compensation +/- 300 mm, hydropneumatic gas pressure suspension Hydraulic steering for all axles Remote control for steering axles 5. Notes: With the 4 heavy-duty modules, up to 3 different tractor combinations are possible! Payloads change depending on the configuration. For the special low-bed combination, a current manufacturer's certificate from Goldhofer is available. The low-bed trailer can be tested at our facility. Price NET excluding 19% VAT. All information without guarantee. Subject to errors and prior sale. Internal vehicle number: 2285 Hfodpfexcdfaox Afisn