Used Tightening Bolts for sale (1,949)

Condition: new, table length 1200 mm table width 700 mm table height 900 mm table load capacity 250 Kg weight of the machine ca. 36 Kg dimensions 1,2 x 0,8 x 0,85 m Siegmund workbench incl. accessories - consisting of screw clamps, manual clamping bolts, surface clamping bolts and angle bracket - Frame made of aluminum profiles - Working height 900 mm - Surface made of aluminum table profiles - Drill hole Ø 16 mm - Hole spacing 50 mm - Hexagon groove HX8 - Hexagon groove distance 50 mm - When clamping aluminum parts, the bolts may only be tightened hand-tight. Bljdevxw Hyspfx Adrsi - For clamping: Manual clamping bolt 160514

Condition: used, The Alfa Laval M10-MBASE is a compact and highly efficient plate heat exchanger, designed for demanding applications in the beverage and food industry, chemical processing, and general heating and cooling duties. Technical Specifications Type: M10-MBASE Heat transfer area: 2.6 m² Plate material: Stainless steel Alloy 316, thickness 0.50 mm Gasket material: NBRFF Clip-On (Nitrile rubber) Plate pack thickness: 63 mm Total weight: 232 kg Total volume: 13 liters Dimensions: Height 672 mm, width 618 mm, depth 530 mm Connection standard: DIN NW100 Bolts: M20 Expandable: up to 17 additional plates Operating Data Blsdoxytv Nspfx Adrji Design pressure: 10 bar Test pressure: 14.3 bar Design temperature: up to 120 °C Minimum temperature: 0 °C Typical flow examples (according to datasheet): Wine: 2,000 L/h (heating 12 → 17 °C, Δp = 47 kPa) Hot water: 2,000 L/h (cooling 30 → 24 °C, Δp = 22 kPa) Fruit juice: 240 L/h (heating 21 → 75 °C with 90 °C hot water, Δp ≈ 40–50 kPa) Design Features Plates with parallel flow channels ensure high efficiency and low pressure drop. Clip-on gaskets for easy maintenance and cleaning. Robust frame and pressure plate construction with M20 tightening bolts (length 360 mm). Flexible capacity expansion, up to 17 additional plates can be installed. User-friendly assembly with clear A/B plate markings. Typical Applications Beverage pasteurization (e.g., wine, juice, beer) Hot water and cooling water circuits CIP cleaning systems General process heat transfer in industrial applications

Condition: used, Calibration: metric Rotating table size: 1100 x 820mm Spindle size: 70mm Spindle taper: 40 international Spindle speeds: 18 to 1000 (12) Spindle travel: 500mm X axis travel: 1500mm TBC Y axis travel: 1000mm Bsdpfx Ajy Drp Sedrjli Z axis travel: 1200mm Complete with Power rotary table 3 axis DRO Spindle steady Bolt on Boring and facing head on davit 400 mm Dia Machine in very good condition Dims :- 3500mm long 2200mm wide 2400 high and weighs 6500 Kgs

Condition: used, Year of construction: 1959, shaft length 10 - 130 mm wire diameter 5 - 10 mm length of wire blank max. 165 mm capacity/output with closed mould, adjustable 125 /min capacity/output with open mould, adjustable 75 /min Weight 8,0 t Blsdjyx Ihgepfx Adrji dimensions of the machine (WxDxH) 2,1 x 3,7 x 1,5 m combined double-pressure cold header press for jaws and closed moulds maximum wire diameter for high tensile bolts und carriage bolts 8 mm maximum wire diameter for mild steel bolts and rivets 10 mm wire diameter range 5 - 10 mm minimum and maximum shaft length 10 - 130 mm maximum length of wire blank 165 mm capacity/output with closed mould, adjustable - 125 St/min capacity/output with open mould - 75 St/min power requirement 11,0 kW mould dimensions - jaw dimensions 44 x 44 mm

Condition: used, Year of construction: 1966, shaft length 15 - 130 mm wire diameter 6 - 12 mm length of wire blank max. 170 mm capacity/output with closed mould, adjustable 100 /min capacity/output with open mould, adjustable 67 /min Weight 12,5 t dimensions of the machine (WxDxH) 2,3 x 4,0 x 1,6 m SPECIAL DEAL as is where is WITHOUT putting into operation / WITHOUT additional work free loaded to truck combined double-pressure cold header press for jaws and closed moulds maximum wire diameter for high tensile bolts und carriage bolts 10 mm maximum wire diameter for mild steel bolts and rivets 12 mm wire diameter range 6 - 12 mm minimum and maximum shaft length 15 - 130 mm maximum length of wire blank 170 mm Blsdpfxev Sva Ej Adroi capacity/output with closed mould, adjustable - 100 St/min capacity/output with open mould - 67 St/min power requirement 15,0 kW mould dimensions - jaw dimensions 54 x 54 mm

Condition: used, Year of construction: 2005, 1 used, very well-maintained crankshaft milling attachment for mounting, e.g., on a lathe for milling crankshafts or other milling operations. Manufacturer: SEMA, Origin: Austria Model: SE 100 Year of Manufacture: 2005 Technical Data: Bodpfx Ajddziysdrjli Spindle mounting: ISO 50, Runout / Test mandrel L=300 mm = 0.01 mm Speed range, continuously variable: Currently set to 2,000 rpm Spindle is designed for: Up to 3,000 rpm Drive power: Currently 15 kW The milling spindle is designed for: Up to 25 kW Bearing diameter: 110 mm The 2 bolted adapter plates under the milling spindle are each bolted on. These plates can be used for your lathe, modified, or may need to be newly manufactured. Mounting surface of the milling spindle: L x W: 490 x 250 mm Accessories / Special Features: Milling spindle: • The milling spindle is mounted on the flat support of your lathe • Continuously variable speed adjustment, frequency inverter manufacturer LENZE, designed for up to 30 kW • Right / Left rotation • Lifetime-lubricated spindle bearings • Stable construction with hardened and ground spindle • High precision • 2-fold supported spindle with 5 spindle bearings • Workpiece clamping via a threaded spindle • Mobile carriage with control panel • Emergency stop • Lockable main switch Indexing gear for the main spindle: • A long drive rod is mounted in the spindle bore and connected to the gear • Continuously variable speed adjustment, frequency inverter manufacturer LENZE • Right / Left rotation • Jog operation, fast / slow The pictures show this unit mounted on a universal lathe SARO SPA 10 x 3000 for milling crankshafts. This lathe is not included in the scope of supply! Siegfried Volz Werkzeugmaschinen Rüschebrinkstr. 151-153 D - 44143 Dortmund - Wambel

Condition: ready for operation (used), Year of construction: 2023, operating hours: 208 h, spindle speed (max.): 4,000 rpm, travel distance X-axis: 200 mm, travel distance Z-axis: 406 mm, number of axes: 2, Horizontal turning machine manufactured in 2023. This HAAS ST-15 features a maximum spindle speed of 4000 RPM and includes a 12-station bolt-on turret. It comes equipped with a Haas Bar Feeder and a hinged belt chip conveyor for efficient operation. If you are looking to get high-quality turning capabilities, consider the HAAS ST-15 machine we have for sale. Contact us for further details regarding this machine. • Condition: very good • Power on time: 1369:37:08 h • Cycle start time: 373:45:41 h • Feed cutting time: 208:26:21 h • Finished parts counter: 250 • M30 counter 1: 1577 Bedpjy R Dh Tefx Adreli • M30 counter 2: 14238 • Electrical: 440 V, 3-phase, 50/60 Hz • Full load amps: 20 A • Largest load: 18 A • Sub-spindle: not equipped (max speed 0 rpm) • LT-spindle: not equipped (max speed 0 rpm) • Memory: 1 GB Technical Specification Counter Spindle No Driven Tools No

Condition: ready for operation (used), Year of construction: 2013, operating hours: 9,554 h, spindle speed (max.): 4,500 rpm, travel distance X-axis: 239 mm, travel distance Z-axis: 826 mm, spindle motor power: 22,400 W, number of axes: 4, This 4-axis HAAS DS-30SSY was manufactured in 2013. It features Y-axis milling capability, a sub-spindle, and live tooling, enhancing its versatility for various machining tasks. The machine includes a 12-station bolt-on turret and comes equipped with a chip conveyor and mist collector. If you are looking to get high-quality turning capabilities, consider the HAAS DS-30SSY horizontal turning machine we have for sale. Contact us for further details. • Condition: In good condition • Usage: Motion Time 54,567 h; Servo Time 62,795 h • Spindles: Dual spindle (sub-/counter spindle; rarely used) • Turret: 12-station bolt-on turret (BMT65 style) Bljdsy R Dikepfx Adroi • Capabilities: Y-axis milling, live tooling • Electrical: 360–480 V, 3-phase, 50/60 Hz; Full load amps 40 A; Largest load 70 A; Short-circuit interrupting capacity 10,000 A Additional equipment • Chip conveyor (Jorgensen) • Mist collector: SARA Ultra-Jet 2 SD • Parts catcher • Coolant hose • Foot pedals • Samchully MH-206V1 as a counter-spindle chuck Technical Specification Counter Spindle Yes Driven Tools Yes

Condition: new, 300 kN stroke length max. 235 mm 200x24 mm bending capacity max. - round 60x4,0 mm toolpiece height max. 250 mm 660x1250 mm work height max. 900 mm return speed 20 mm/sec working feed 10 mm/sec total power requirement 3 kW weight 950 kg Domestic equipments: Bjdpfxjyv I Tde Adroli - semi-automatic NC control (99 programs with 16 steps each) - incl. bending bolt (without punch) - Incl. tool holder for dies - incl. foot pedal Equipment: - Stamp, smallest U = 145 mm 85 °    H = 250 mm, R = 5 mm - Quick change Monomatrize 85 °    H = 250 mm, V = 63 mm

Condition: used, maximum load weight: 30,200 kg, overall weight: 38,000 kg, axle configuration: 2 axles, first registration: 11/2020, next inspection (TÜV): 10/2026, total width: 2,550 mm, total height: 3,900 mm, Year of construction: 2020, Equipment: ABS, 2-axle DOLL LOGO 21 with 8 bolsters First registered November 2020, from a single owner Mileage only 58,700 km Both axles with forced steering and remote control Hydraulic adjustment of the 3 rear bolsters, operated from the crane platform 2x 12 tonnes BPW axles with drum brakes WABCO Trailer EBS Length 10,715 mm Extendable from -1,800 to +4,500 mm Loading height 1,640 mm Unladen weight 7,800 kg Tires: 8x 315/80 R 22.5, tread depth 70 to 80% 8-bolt design for transporting: Bodpeyr U Dgjfx Adrjli 4x 2-meter logs 4x 3-meter logs 3x 4-meter logs 2x 5-meter logs 2x 6-meter logs and long timber up to 21 meters 8x DOLL MAMMUT steel bolsters 16x DOLL rectangular stanchions, load capacity up to 9,000 kg per pair Full-LED lighting 4x LED work lights Central lubrication system Very good condition RENT is the new BUY, also available for RENT IMMEDIATELY-----

Condition: excellent (used), Year of construction: 2008, functionality: fully functional, Soraluce model FL8000 high performance travelling column, floor type CNC milling machine TRAVEL (X) 7,500 mm TRAVEL (Y) 1,400 mm TRAVEL (Z) 1,000 mm RAPID TRAVERSE (X,Y,Z) 25,000 mm/min WORKING FEED RANGE (X,Y,Z) 1 – 10,000 mm/min ACCELERATION RATE (Instantaneous not maximum) 1 m/sec2 SPINDLE SPEED 20 - 4,000 Rpm SPINDLE TAPER ISO 50 SPINDLE POWER 28 Kw NC15C - HEIDENHAIN iTNC 530 (Flat 15.1" TFT Screen with digital drives). Single processor version. Prepared for a machine of 10 motors (9 CNC axes + spindle motor). Main push button panel with individually operated push buttons for linear axes (X+, X-, Y+, Y-, Z+, Z-) K20 smarT.NC option for the i530M. Independent AC. Heidenhain digital drive servomotor for each axis HEIDENHAIN HR-410 portable electronic handwheel with 5m spiral cable Automatic Indexing head 28Kw, 760Nm, 0.001°x 0.001°, 4000 Rpm. Continuous air and oil mist lubrication system for head gears. Automatic Tool Clamping device – 15,000N. Automatic hydraulic tool releasing device Spindle taper: BT50 High Torque spindle motor 28kW, 100% ED, digital motor. R10 – ZF gearbox two speed including cooling unit Spindle Speed Range 20 – 4,000Rpm Bodpfow U Tlzsx Adrjli Rapid Feed X-Y-Z axes 25.000mm/min Working Feed range X-Y-Z axes 0 - 10.000mm/min Acceleration rate X- Y -Z axes 1 m/s2 (instantaneous, not maximum) Hydraulic counterbalance system for head/ram assembly X axis driving system by two servomotors, two gearboxes and a double rack & pinion Preloaded ballscrews with double recirculating nuts in Y and Z axes. Automatic centralized lubrication system. Linear Guiding System with recirculating cylindrical rollers in each axis. Automatic centralized lubrication system for the guides. HEIDENHAIN Linear measuring scales in X-Y-Z axes with compressed air purge system - (Precision +/- 0,005mm) H48 – Coolant through the spindle type AD. M3 – Automatic tool changer 40 stations. M6 – Horizontal-vertical tool changing facility. M8 – Motorized tool changing device. Tool changer is driven by a servo motor Hydraulic equipment Front metallic roller blind cover to both upper and lower ram area, together with metallic protection to the lateral side of the column, between the machine table and the rear guideway support, which protects the vertical movement of the ram. CE10 - PROTECTION on the back and both lateral sides of the machine column P20 - Operator's platform fixed to the column and travels together with it in the "X" axis direction. The main operator’s panel is mounted within the operator's platform area for machines without an operator’s pendant and is accessed from the rear of the machine. D7 + D50A - Coolant system with 1000L capacity tank with two pumps providing high and low pressure providing 5 & 12bar and 50L/min flow rate. Paper and Magnetic filtering. E30A – swarf conveyor FL8000 Hinge conveyor belt. Width 350mm PW11B – Pendulum working area system. PM2 x 2 – Machine prepared by Soraluce for the inclusion of two rotary tables. Working area lighting. Electrical cabinet cooling system Electrical cabinet lighting Working methods - According to CE safety regulations Filter to assure electromagnetic compatibility. Protection to both sides of the column with security bumpers Anchoring Bolts Standard Colour - Blue RAL 5005 / Grey RAL 7035 K19 – Two sets of machine documentation (One hard copy, one on CD ROM) Floor plate 8,000 x 1,500 x 300mm

Condition: good (used), Transport shots, crane shot -Spare part: from a machining center, manufacturer Sigma, type Mission 5 -Hole: Ø 140 mm -Recess opening: Ø 80 mm -Bolt circle: Ø 110 mm -Quantity: 4 pieces available -Price: complete Bodscnf E Uopfx Adreli -Weight: 23 kg

Condition: new, machine/vehicle number: 280270 0001, ADVANTAGES: compact table machine simple operability 3-axis stepper motor control with path operation Ball screws 2-phase stepper motors CNC control software included ICP series - with stepper motor drive and path control GENERAL CNC machines of the ICP series are further developments of the proven CPM series. The introduction of a sliding door means that the machines can now be operated from a seated position, which results in shorter cycle times for hood opening, among other things. The chassis is completely bolted together instead of welded as in the predecessors. This results in greater precision when setting up the machine, as well as improved serviceability. Furthermore, the resonance and vibration behavior has been optimized, resulting in lower noise levels. X = 400mm Y = 300 mm Z = 140 mm Diffuser = 200 mm -in use for over 40 years!!! -over 20,000 systems sold. HIGHLIGHTS compact table machine Blsdpfx Adelkbpzeroi simple operability 3-axis stepper motor control with path operation Ball screws 2-phase stepper motors CNC control software included Mosaic Safety Circle POPULAR MATERIAL Foam Plastics ACCESSORIES Length gauge Spindles (iFM1000ER, iFM1000WS) Quick clamping system Spannzangen Suction device

Condition: used, Year of construction: 2009, HOLZ-HER edge banding machine CONTRIGA 1366 Edge thickness: 0.4-30 mm (depending on equipment) Edge height: 51/66 mm (depending on equipment) Panel thickness: 6-45/60 mm (depending on equipment) Edge types: Rolls and strips Feed speeds: Continuous feed from 12-30 m/min (depending on equipment) With adjustable infeed level in the magazine area (max. adjustment range 30 mm) With height-adjustable magazine plate for changing the lower edge overhang With large magazine plate Ø 820 mm for edge rolls up to Ø 800 mm With transport chain including automatic central lubrication With motor-driven, position-controlled bridge height adjustment With pneumatic locking roller for the shortest workpiece sequence With extendable workpiece support (extension width 1600 mm) With space-saving, pneumatically controlled sliding hoods over the entire machine (Deviations for individual units are possible) with motorized infeed guide with injection oiler for lubricating all joints and bolts (including operating hours counter) with central connection for extraction (2x Ø 200 mm) with integrated chip collection box at the end of the machine (when radius scraper unit is installed) PPC 231 control system - Power PC for efficient setup and changeover - 15" SVGA screen with touchscreen - 128 MB CF memory card - USB connector on board - Ethernet network connection - Keyboard connector on board - Windows-like user interface - all information in plain text and/or graphics - Rotatable and pivoting control panel at eye level - Dust-proof membrane keyboard with softkeys (pushbuttons) - LED display for unit preselection - Program list with program names and numbers - Extensive program memory - Individual selection of the units with the functions as basic setting options for setpoints, route points and tool corrections as well as the fixed route points - Centralized and clear setup processes for units and their axis settings via fine adjustment (depending on the equipment) - Interval display for the shortest workpiece distance - Integrated path control - Path points are controlled generally or program-specifically - Clear and complete recording of all operating data - Service messages in plain text - Diagnostic system - including integrated synchronous bus system for high precision in unit control - Individual administration for up to ten users, including password protection - Online maintenance (optional), data exchange with HOLZ-HER Service - Barcode interface (optional) BASIC MACHINE CONTRIGA 1366 - Belt bridge Options and accessories for the basic machine Spraying device 1856 for the inlet and outlet area For the inlet area: Electronically controlled release agent sprayer with Riepe-LPZ/II release agent For the outlet area: Electronically controlled cleaning agent sprayer with Riepe-LP163/93 cleaning agent (only in conjunction with pre-milling unit 1961 and surface scraper 1964) Joint milling unit Joint milling station 1803 (2x 2.6 kW, 200 Hz, 12000 min-1) With two plunge-controlled milling units 1 unit in up-cutting direction 1 unit in down-cutting direction Plunge path 5 mm With static frequency converter 200 Hz Without milling tool With ProLock screw-in clamp for fast tool changes Tool for 1803 (workpiece height up to 60 mm) Diamond milling cutter PRO UT 2 pieces (front and rear) including protective covers Ø 100-63 - Ø 30 mm, Z = 3 + 3 + 3, 1x left-hand rotation, 1x right-hand rotation Noise-reduced milling cutter with integrated chip guide DFC technology (Leitz syst Blodsvvkfdepfx Adrsi

Condition: used, maximum load weight: 32,260 kg, overall weight: 39,000 kg, axle configuration: 3 axles, first registration: 03/2014, next inspection (TÜV): 03/2026, loading space length: 13,650 mm, loading space width: 2,480 mm, loading space height: 3,000 mm, total width: 2,550 mm, total height: 4,000 mm, Equipment: ABS, In accordance with our "General and Interpreted Terms and Conditions" and without any guarantee or warranty, we can offer you, subject to prior sale and errors or typos excepted, the following vehicle on a non-binding basis until conclusion: Bjdpfx Adszir S Ieroli Krone Curtain Mega with Joloda tracks and lifting roof (Vehicle No. 489) First registration: 06.03.2014 Type: SD Gross permissible weight: 39,000 kg Unladen weight: 6,740 kg Payload: 32,260 kg TÜV (Roadworthiness): 03/2026, Safety Inspection: 09/2026 Fixed front wall Curtainsider access on both sides Edschaverdeck sliding roof system Lifting roof 13 pairs of lashing rings fitted into the outer frame Floor equipped with Joloda tracks + cargo securing bolts/ chocks Split rear portal doors (1/2 + 1/2) 1 pair of LED work lights, one each left and right at the front frame 2 x 12 t two-speed landing gears 1st axle is a lift axle BPW drum brakes Tyres: 425/45R19.5 2 x LED reversing lights, 1 x red rear fog light Price: €3,000.00 (net) All information provided without any guarantee or warranty. Our "General and Interpreted Terms and Conditions" apply. Place of jurisdiction for both parties up to a dispute value of €50,000.00 is the District Court of Ludwigslust, for higher dispute values, the Regional Court of Schwerin. Subject to prior sale, errors and typographical mistakes.

Condition: used, empty load weight: 8,850 kg, maximum load weight: 30,150 kg, overall weight: 39,000 kg, axle configuration: 3 axles, first registration: 10/2015, next inspection (TÜV): 07/2021, loading space length: 13,410 mm, loading space width: 2,490 mm, loading space height: 2,600 mm, loading space volume: 86 m³, suspension: air, tire size: 385/65 R22,5, color: white, Year of construction: 2015, Equipment: ABS, tail-lift, Tare weight: 8850kg, GVW: 39000kg, Loading area (L W H): 13,410 mm x 2,490 mm x 2,600 mmTyre size: 385/65 R22.5, Loading area volume: 86 m³, 1st axle: , 2nd axle: , 3rd axle: , Air suspension, Rear underrun, Taillift: Dhollandia, Electronic Brake System EBS, Ferry lashings, Bolted chassis, Gantry doors, ISO partition wall without ventilators, Temperature recorder, 1x15 and 2x7 pin plug, Antispray, International customs seals, Telematics system: TrailerConnect, Please find an overview of all vehicles available on our website . Finance required? We offer individual financing solutions, full service contracts and telematic-services. We would be glad to advise you personally. Bljdszagn Hepfx Adrji

Condition: used, empty load weight: 6,571 kg, overall weight: 39,000 kg, axle configuration: 3 axles, first registration: 05/2025, next inspection (TÜV): 07/2027, loading space length: 13,620 mm, loading space width: 2,480 mm, loading space height: 2,680 mm, loading space volume: 90 m³, suspension: air, tire size: 385/65 R22,5, color: silver, Year of construction: 2025, Equipment: ABS, Unladen weight: 6571 kg, permissible total weight: 39000 kg, load securing with certificate, cargo space (L W H): 13,620 mm x 2,480 mm x 2,680 mm, tire size: 385/65 R22.5, certificate DIN EN 12642 (code XL), cargo space volume: 90 m³, 1st axle: , 2nd axle: , 3rd axle: , air suspension, underrun protection, lift axle at the front and rear, pallet box, electronic braking system EBS, tool box, spare wheel holder (2x), bolted chassis, portal doors, sliding tarpaulin, connection plug 1x15 and 2x7-pole, anti-spray, aluminum rims, telematics system. You can find our entire vehicle range at [website address]. Would you like financing? With our Value Added Services, we offer you individual financing options, full-service and telematics services. We will be happy to advise you. Blodpfxezig Uds Adroi

Condition: used, amount 1 Palette Primarily turned parts, shafts, spindles, and tool holders used in mechanical engineering and machining. -> Tool holders — cylindrical holders into which milling cutters, drill bits, or turning tools are clamped. Many have tapered shanks, clamping grooves, or flanges. Bledpfx Adszhcggerji -> Shafts and spindles — elongated components, often with mating surfaces, threads, or grooves. They transmit torque or serve as guides. -> Turned parts — precision-machined metal components, usually made of steel, with varying diameters and steps. -> Flanged parts — parts with wide contact surfaces that are bolted together.

Condition: excellent (used), Year of construction: 2021, functionality: fully functional, machine/vehicle number: B29779, year of last overhaul: 2026, TRANSPAK TP 702 Inox automatic strapping machine, arch 650 x 500, 8 mm strapping, speed of 50 straps per minute, automatic strapping feed and ejection, adjustable tightening tension via potentiometer, cycle start via foot pedal or button, year 2021. Blsdpfozidnzex Adrei

Condition: excellent (used), Year of construction: 2013, functionality: fully functional, year of last overhaul: 2026, Mosca ROM Fusion automatic strapping machine, arch size 600 x 500, 5 mm strapping, automatic strapping feed and ejection, adjustable tightening tension via potentiometer, speed of 50 to 55 cycles per minute. Double foot pedals. Year 2013. 2 machines available. Video available upon request. Bodpfxezic Dzj Adroli

Condition: excellent (used), total width: 36,000 mm, total length: 90,000 mm, total height: 9,500 mm, For Sale: High‑Quality Steel Warehouse Hall Structure – ASTRON LINDAB Good morning, We are offering for sale an exceptionally solid and durable ASTRON LINDAB steel warehouse hall structure with a total area of approximately 2,800 m² and a height of over 8.5 meters. Bodpfxoylc Uyj Adrsli This structure was originally erected in Warsaw for the renowned company PURMO RETTIG HEATING, a global leader in the heating industry. A few years ago, the entire property on which the hall was located was sold and redeveloped into a new residential complex. As a result, the warehouse hall was fully dismantled under the supervision of ASTRON LINDAB representatives. All structural elements were then transported and reassembled on another of our properties, strictly in accordance with ASTRON LINDAB guidelines. The dismantling and reassembly were carried out by a professional, specialized company. Every structural element has been catalogued, labelled, and numbered. Technical Specifications: Total area: approx. 2,800 m² Span width: 36.6 meters Total length: 90 meters Height: 8.64 meters (maximum height 9.36 meters) Number of segments: 14 No internal support columns Modular Sale Option The hall can be sold as two or three smaller modules, for example: 1,500 m² / 1,000 m² / 800 m² Please note: the price of smaller modules is 25% higher. The current market price of a new, identical structure is approximately: PLN 1,700,000 net / EUR 400,000 net Important Information: We are selling only the steel structure, including all steel tension elements and structural bracing, steel structures of the side walls and roof. Roof and wall cladding panels are not included and must be purchased new and installed after erecting the structure. Additionally, we have all original bolts, nuts, and dismantled components, carefully sorted and stored in two large maritime containers. We also possess the original hall design documentation and can provide access to a structural engineer if a new adaptation or a building permit design is required for this structure. This offer represents a unique opportunity for anyone planning to construct a similar warehouse hall at a significantly reduced cost. PRICE: EUR 179,000 netto (750.000zł netto) We invite serious buyers to contact us.

Condition: good (used), Mixing Tank, Mixer, Pressure Vessel, Heating Jacket, Chemical Industry, Used Equipment Design: Cylindrical tank with shallow dished bottom and top, equipped with an agitator. The tank bottom and shell are double-walled with a heating jacket. The tank lid is removable with a flanged bolt connection. The lid has a cleaning opening. Material Quality: Carbon steel with painted surface. Manufacturer: Robert Hinkel & Co Type: 9601 Bedpfx Aetrdyredrjli Volume: 200L Operating Pressure: 3 bar Electrical Data: 380V; 0.75kW; 2.0A

Condition: used, Mixing Tank, Pressure Vessel, Used Machine Manufacturer: Robert Hinkel & Co Model: 9601 Volume: 200 L Operating Pressure: 3 bar Electrical Data: 380V; 2.0A; 0.75 kW Overall Dimensions: Ø 850 mm, height 1780 mm Design: Cylindrical tank with shallow-dished top and bottom, equipped with an agitator. The tank bottom and shell are double-walled with a heating jacket. Bledpfxoxacl To Adroi The tank lid is removable, secured with a flanged bolted connection. The lid includes a cleaning/inspection opening. Material: Carbon steel with painted surface

Condition: like new (used), Year of construction: 2020, functionality: fully functional, tank capacity: 30,000 l, usable tank capacity: 30,000 l, total height: 4,275 mm, inner diameter: 4,000 mm, outer diameter: 4,020 mm, overall weight: 4,250 kg, wall material: stainless steel, wall thickness: 10 mm, operating temperature: 100 °C, Equipment: CE marking, sanitary facilities, Brand new, never commissioned. Professionally decommissioned from an INEOS manufacturing facility prior to first use. Manufactured by Able Engineering, this high-specification sanitary 316L stainless steel pressure vessel is suitable for pharmaceutical, cosmetics, personal care, food, beverage and fine chemical applications. Designed for vacuum and low-pressure service and suitable for installation within ATEX-rated environments. Constructed entirely in 316L stainless steel throughout with 10mm shell and dish walls, dished top and bottom heads, heavy duty tubular stainless steel leg supports with bolt-down base plates, hygienic internal finish < 0.8 Ra, and full hygienic ferrule fittings throughout conforming to ASME BPE / BS3062. Suitable for CIP, excellent condition. Material: 316L Stainless Steel throughout. Working Volume: 30,000 Litres. Shell ID: 4,000mm. Overall Height: 4,275mm. Shell & Dish Wall Thickness: 10mm. Design Pressure: -1.0 to +0.45 Bar.G. Design Temperature: -10°C to +100°C. Empty Weight: 4,250kg. Design Code: PD5500:2018, Cat.3. PED 2014/68/EU certified. Manufacturer: Able Engineering. Serial Number: PXL19785. Factory Tested: July 2021. Nozzles and fittings include 610mm hinged manway with grill, triple CIP sprayball arrangement, inlet connections, vent, pressure relief valve connection, Endress & Hauser hygienic thermowell, dual level switches, level measurement connection, lifting lugs, and earthing boss. Two units currently available, both brand new and never commissioned, sourced directly from the same INEOS facility. Tank saddles available on request for either single use or purchase. Please view our other listings for additional sizes and configurations — all stock is brand new, ex-INEOS, and available for immediate inspection and purchase. Original engineering drawings and full nameplate documentation available on request. Inspection welcome by appointment. Loading and transport can be arranged. Tracht Ltd specialise in hygienic process equipment for the food, beverage, cosmetics, pharmaceutical and chemical industries, with practical experience supporting both batch and continuous manufacturing environments. In addition to process vessels, Tracht Ltd supply and install stainless steel mixing vessels, Silverson high-shear mixers, hygienic lobe pumps, hygienic centrifugal pumps, access gantries, and provide full vessel installation and commissioning services. Whether replacing existing equipment or expanding production capacity, Tracht Ltd can specify, supply and install the right equipment for your application. £149,950 + VAT. Please contact us for further information or to discuss delivery and installation options. Blsdpfx Adjzhn Rqjrsi

Condition: like new (used), Year of construction: 2020, functionality: fully functional, tank capacity: 15,000 l, usable tank capacity: 15,000 l, total height: 3,875 mm, outer diameter: 1,750 mm, overall weight: 2,900 kg, wall material: stainless steel, wall thickness: 8 mm, manhole diameter: 610 mm, manhole location: top, operating temperature: 80 °C, Equipment: sanitary facilities, Brand new, never commissioned. Professionally decommissioned from an INEOS manufacturing facility prior to first use. Manufactured by Able Engineering, this high-specification sanitary 316L stainless steel pressure vessel is suitable for pharmaceutical, cosmetics, personal care, food, beverage and fine chemical applications. Designed for vacuum and low-pressure service and suitable for installation within ATEX-rated environments. Constructed entirely in 316L stainless steel throughout with 8mm shell and dish walls, dished top and bottom heads, heavy duty tubular stainless steel leg supports with bolt-down base plates, hygienic internal finish < 0.8 Ra, and full hygienic ferrule fittings throughout conforming to ASME BPE / BS3062. Suitable for CIP, excellent condition. Material: 316L Stainless Steel throughout. Working Volume: 15,000 Litres. Shell ID: 2,930mm. Overall Height: 3,875mm. Shell & Dish Wall Thickness: 8mm. Design Pressure: -1.0 to +0.45 Bar.G. Design Temperature: -10°C to +100°C. Empty Weight: 2,900kg. Design Code: PD5500:2018, Cat.3. PED 2014/68/EU certified. Manufacturer: Able Engineering. Serial Number: PXL19635-3. Factory Tested: September 2020. Nozzles and fittings include 610mm hinged manway, CIP inlets with dip pipe and TOD clip-on spray fittings, pressure relief valve connection, nitrogen blanketing connection with pressure indicator, Endress & Hauser hygienic thermowell, flush polished level switch, level measurement connection, lifting lugs, and earthing boss. Two units currently available, both brand new and never commissioned, sourced directly from the same INEOS facility. Tank saddles available on request for either single use or purchase. Please view our other listings for additional sizes and configurations — all stock is brand new, ex-INEOS, and available for immediate inspection and purchase. Bedpfx Aezhn Ngedrsli Original engineering drawings and full nameplate documentation available on request. Inspection welcome by appointment. Loading and transport can be arranged. Tracht Ltd specialise in hygienic process equipment for the food, beverage, cosmetics, pharmaceutical and chemical industries, with practical experience supporting both batch and continuous manufacturing environments. In addition to process vessels, Tracht Ltd supply and install stainless steel mixing vessels, Silverson high-shear mixers, hygienic lobe pumps, hygienic centrifugal pumps, access gantries, and provide full vessel installation and commissioning services. Whether replacing existing equipment or expanding production capacity, Tracht Ltd can specify, supply and install the right equipment for your application. £89,950 + VAT. Please contact us for further information or to discuss delivery and installation options.