Used Thread Milling And Hobbing Machine for sale (69,710)

Condition: excellent (used), Rapid radial drilling machine / Radial drilling machine / Drilling machine (used) Manufacturer: Mikrosa Year of manufacture: 2001 Type: SRB 35 Drilling capacity: - Steel: 35 mm - Cast iron: 40 mm Thread cutting: - Steel: M20 - Cast iron: M24 Spindle taper: MK 4 Spindle speed: 20 – 2800 rpm, infinitely variable Automatic feed: infinitely variable Spindle stroke: 140 mm Arm reach: 1000 mm Table size: 1050 x 400 mm Column diameter: 200 mm Installation height: 600 mm Connected load: 7.8 kW Space requirement: approx. width 1250 mm, depth 2100 mm, max. height 2700 mm Weight: approx. 2000 kg Hydraulic clamping Thread cutting device Depth stop Hfedpjy Skrzjfx Ag Isg Lateral clamping surface Drill chuck 2 gearbox stages The machine is in very well-maintained condition, runs very smoothly, and is ready for immediate operation. Forklift available, free loading on truck. Affordable shipping possible. Location of the machine: 48477 Hörstel

Condition: good (used), Year of construction: 2003, x-travel 500 mm y-travel 500 mm z-travel 420 mm Control Heidenhain / Millplus total power requirement 35 kW weight of the machine ca. 5,7 t Hodpfsy Raluex Ag Ijfg

Condition: used, Year of construction: 2001, x-travel 560 mm Hfodpfxsyi Hv Nj Ag Ijg y-travel 460 mm z-travel 450 mm Control OSP U10 M total power requirement 7,5 kW weight of the machine ca. 5 t

Condition: used, Year of construction: 2000, x-travel 1.050 mm y-travel 560 mm z-travel 450 mm Control OKUMA OSP-U100M-H table dimensions 1.300 x 560 mm Hfsdpfx Agoy Rakks Ijg spindle tunring speed 10.000 U/min tool taper BT 40 In our assessment, the machine is in good used condition and can be inspected under power by appointment. Accessories, tools, and clamping devices shown are only included in the scope of delivery if this is noted in the additional information. Technical data and specifications are subject to change without notice and errors. Prior sale is reserved.

Condition: excellent (used), functionality: fully functional, Milling machine Saimp model FU-P2. Machine complete with axis display and dividing head. Used. Hodpoy N T Umsfx Ag Isfg

Condition: good (used), table width: 260 mm, table length: 1,120 mm, rotational speed (max.): 2,000 rpm, rotational speed (min.): 90 rpm, – ISO40 – 90–2000 rpm – Table 1120 × 260 mm – Automatic feed on X, Y, and Z axes Hodpfxjy Siras Ag Iefg – Rapid traverse – Digital readout on 3 axes – Quill – Milling head is swiveling – Lighting – 400V

Condition: excellent (used), Year of construction: 2014, Kunzmann WF 600 M Tool Milling Machine Kunzmann WF 600 M with Heidenhain TNC 124 Control Year of manufacture 2014 Excellent CONDITION CE-compliant!! Technical Data: Hjdpfx Asy Sihzjg Ijfg Year of manufacture: 2014 Fixed angle table Spindle speed: continuously variable up to 4000 rpm Feeds: stepless in 3 axes from 0 to 2000 mm/min Travel X/Y/Z: 600/400/400 mm Rapid traverse x/y/z: 5 / 5 / 4 m/min Table size: 650 x 350 mm Table load: 250 kg Vertical quill travel: 60 mm Vertical and horizontal spindle, SK40 Hydraulic clamping system Weight approx. 1700 kg Space requirement approx.: 2.3 x 2 x 2 m Drive power: 12 KVA Accessories and Equipment: Heidenhain TNC 124 control Hydraulic clamping vertical and horizontal Automatic central lubrication Spindle brake Technical documentation, spare parts diagrams, operating manual for the control and programming examples Handwheels, coolant unit, tool holders, vise About the Machine: Offered here is a Kunzmann WF 600 M tool milling machine equipped with a Heidenhain TNC 124 control. This universal milling machine is in very good original condition. It comes from a facility where it was only lightly used for training purposes. The control is very easy to operate. Furthermore, the machine features hydraulic clamping both vertically and horizontally. Converting from vertical to horizontal is straightforward, simply by swinging away the vertical head. The guides are reliably lubricated via central lubrication. The Kunzmann has been mechanically and electrically tested at our facility. Take the opportunity to inspect and test the Kunzmann under power at our premises. You can find more milling machines from renowned manufacturers on our website.

Condition: good (used), Gear hobbing machine, milling machine, tool milling machine, vertical milling machine, roller milling machine, gear hobbing machine, gear hobbing machine, high-performance hobbing machine -Manufacturer: Liebherr, high-performance gear hobbing machine type SS 5- K/500 -Working area: Ø max. 500 mm -Max. cutter diameter: 186 mm -Accessories: including extensive accessories see photos -Machine dimensions: 2300/1460/H1870 mm Hedpfov Dtmmox Ag Iefg -Dimensions accessories: pallets 1420/1300/H300 / 1200/800/300 mm -Weight: 5300 kg plus 535 kg accessories

Year of construction: 1981, condition: used, very high-quality and precise milling machine Hfodey Sid Aepfx Ag Ijg

Condition: good (used), Double-end tenoner, edge processing machine, scoring motor, cutting motor, electric motor, spindle motor, milling motor Hodjb A Nmdopfx Ag Ijfg -1x motor: 1.5 kW 2770 rpm at 50 Hz -Hole: Ø 30 mm -Motor mounted on guides -Quantity: 1 motor available with left-hand thread -Price: per piece -Weight: 20 kg/piece

Condition: excellent (used), LOG CABIN MILLING MACHINE FOR PRODUCING CHALET CORNER JOINTS BY MILLING FOUR SIDES OF THE LOG BEAM. MAXIMUM LOG LENGTH 6000MM (DISTANCE BETWEEN 5770 MM) MINIMUM LENGTH 450 MM 4X MILLING HEADS PER SIDE (2 SIDES) CAPABLE OF 3 CYCLES PER MINUTE MAXIMUM WIDTH 250 MM MAXIMUM THICKNESS 140MM SUPPLIED WITH ADJUSTABLE TOOLING SUITABLE FOR 34MM TO 70MM JOINTS 8X 4 KW MILLING MOTORS DIGITALLY DISPLAYED LENGTH MEASUREMENT SYSTEM SIMPLE ELECTRONIC CONTROLS (NO PLC) 5,5 KW FEED MOTOR POSSIBLE TO SUPPLY WITH STACKING UNIT AFTER IF NEEDED MODIFIED LEFT SIDE TO ALLOW CHALET ROOF OVERHANG LENGTH AS NEEDED Hjdpfjy Sgx Rox Ag Iofg VERY GOOD QUALITY KNOTCHING PRICE DISMANTLED AND LOADED TO TRUCK

Condition: excellent (used), functionality: fully functional, Fully functional milling machine, in good working condition – has seen limited use in a small in-house mechanical workshop. Technical data: Working system and travels (XYZ axes): • Table surface: 1600 × 400 mm (extended versions available: 1800/2000 mm × 400 mm) • Longitudinal travel (X axis): 1120 mm • Cross travel (Y axis): 400 mm • Vertical travel (Z axis): 430 mm (mechanically driven to 400–410 mm) • Maximum table load: 1500 kg • Number of T-slots on table: 5 slots, width 18 mm, spaced 63 mm apart Spindle and milling head: • Spindle taper: ISO 50 / SK 50 • Spindle speed range: 28 – 1400 rpm (standard: 18-step adjustment) • Spindle quill stroke: 100 mm • Vertical head rotation: ±45° right/left • Distance from spindle axis to column: 450 mm Hfjdpfx Aoy Sgfdjg Iog • Distance from spindle nose to table: min 70–100 mm / max 500 mm Feed rates: • Feed in X and Y axes: 16 – 800 mm/min (18-step adjustment) • Feed in Z axis: 5 – 250 mm/min (18-step adjustment) • Rapid traverse speed (X/Y): 3150 mm/min • Rapid traverse speed (Z): 1000 mm/min Motors and electrical supply: • Main motor (spindle) power: 11 kW • Total power consumption: approx. 14.5 kW Dimensions and weight: • Machine weight: approx. 4000 kg • Working width/span: approx. 2000 mm • Working depth: approx. 1700 mm (with full table movement approx. 2900–3500 mm) • Machine height: approx. 2700 mm Standard features and functions: • Mechanical/automatic tool clamping: allows quick ISO 50 tool changes without physical force. • Centralized lubrication system: automatic oil supply for guideways.

Year of construction: 2016, condition: ready for operation (used), - USED - TRAVELLING COLUMN MILLING MACHINE Hjdsx Ru Azepfx Ag Iofg LONGITUDINAL TRAVEL: 6000 mm TRANSVERSAL TRAVEL: 1500 mm VERTICAL TRAVEL: 2500 mm RAPID FEEDS L-T-V: 35 m/min SPINDLE: 337- 5000 rpm; 42 kW; 1180 Nm WORKTABLE: 300 x 2500 x 7000 mm HEAD: ISO 50 ; MILLESIMAL POSITIONING ; A/B AXIS AUTOMATIC TOOL MAGAZINE: PICK-UP ; 12 POS CONTROL UNIT: HEIDENHAIN TNC 640 HIGH PRESSURE COOLANT: 20 Bar NOTE: AUTOMATIC HEAD CHANGE; COMPRESSED AIR INSIDE THE TOOL; RTCP; AUTOCAL SOFTWARE FOR AUTOMATIC CALIBRATION

Condition: used, Year of construction: 1994, functionality: fully functional, feed length X-axis: 1,400 mm, feed length Y-axis: 650 mm, feed length Z-axis: 850 mm, spindle speed (max.): 3,000 rpm, front and vertical axle Hfodpfx Agexhfmij Ijg

Condition: excellent (used), Milling machine, copy router in very good working condition. Hfjdjx Rrtdepfx Ag Iog

Condition: used, Year of construction: 1989, x-travel 580 mm y-travel 410 mm Hjdpfx Agjy N D Rfs Iefg z-travel 370 mm Spindle Speed 35-1.800 UpM total power requirement 4,5 kW weight of the machine ca. 1.700 kg

Condition: used, CNC Vertical Machining Center FEHLMANN Type PICOMAX 60 CNC Control System: HEIDENHAIN TNC 426 Serial No.: 14599641 Year of manufacture: 1999 Travel paths X: 500 mm, Y: 350 mm, Z: 610 mm Feed rate: 1 - 20,000 mm/min Rapid traverse: 20 m/min Feed force: 12,000 N Hodpfx Aoy N Du Deg Iefg Table clamping surface: 920 x 380 mm T-slots: 7 pcs, 12-H8 mm Table load capacity: max. 250 kg Table height: 1004 mm Distance spindle nose - table: 94 - 704 mm Overhang spindle - column: 405 mm Spindle speed: 50 - 18,000 rpm, stepless Spindle drive: 10.2 kW (60% duty cycle) Max. torque: 70 Nm (up to 1240 rpm) Spindle taper: SK 30 / DIN 69871A Pull stud: DIN 69872 Drilling capacity in steel: 25 mm Milling capacity in steel / aluminium: 100 / 700 cm³/min Thread cutting in steel / aluminium: M20 / M24 Tool changer: 24 positions Tool change time: approx. 6 sec. Chip-to-chip time: approx. 8 sec. Control: Heidenhain TNC 426 Power supply: 400 Volt, 50 Hz Connected load: 20 kW - Electronic handwheel Heidenhain HR410 - 3D probe Renishaw MP12 - Tool measurement system - TFT display - Direct path measuring system - Coolant system (200 liters, lateral) - Spindle cooling unit (lateral) - Central lubrication Vogel - Air supply: 6 bar, 40 - 200 l/min - Oil mist extraction - Operating hours: - Control on: 97,000 h - Machine on: 80,000 h - Program run: 42,000 h Required space (L x W x H): 2,000 x 1,700 x 3,000 mm Weight: approx. 3.2 t Good condition

Condition: used, Year of construction: 2004, Technical details: x-travel: 600 mm Hfjdpfek Hdu Dsx Ag Isg y-travel: 400 mm z-travel: 400 mm number of spindle speeds: 63 - 3.150 1/min feed stepless: 12-3000 / 6-1500 (Z) mm/min quill stroke: 100 mm milling-head swivable +/-: 90° spindle taper ISO: SK 40 surface area: 630 x 400 mm total power requirement: 8 kW weight of the machine ca.: 2,2 t dimensions of the machine ca.: 2 x 1,9 x 1,95 m universal milling machine with point to point control, mechanical handwheels, swivel - rotary table (mech.) +-45°, hydr. tool clamping, half cabin, coolant device, manuals (German language) *

Condition: new, Clean air extraction / dust extractor Dust-tested to H3, residual dust content less than 0.1 mg/m³ Suitable for extracting and separating dry wood and plastic chips High extraction performance with low space requirement Maximum performance in this class Very quiet Designed for commercial use Robust and compact housing made of galvanized sheet steel Extraction nozzle can be easily converted from left to right for flexible use Large inspection openings Hfodpfxor A Eq Rs Ag Isg Large, mobile chip container with clamping bracket and chip collection bag Dust extractor already fully assembled on delivery, so can be used quickly All models are mobile Polyester fleece filter material, aluminized, therefore with long service life Antistatic filter tested and approved to category M-BIA as standard The fan is connected downstream of the filter Efficiency class extraction motor IE3 Nominal volume flow 1448 m³/h Nominal negative pressure 2242 Pa Power drive motor 2.2 kW, 400 V, 50 Hz Chip collection volume 2 x 165 l Nominal width of external suction connection inlet 160 mm Filter area 9.21 m² Residual dust content < 0.1 mg/m³ Sound pressure level max. 73 dB(A) L x W x H approx. = 1618 x 830 x 1653 mm Weight approx. 268 kg VERSION PM Automatic filter cleaning with pneumatic system that moves a scraper frame

Condition: used, Year of construction: 1998, functionality: fully functional, Used Soraluce model SP 8000 traveling column CNC bed type milling centre with 2.5° automatic universal milling head, 40-station automatic toolchanger and Heidenhain 426 CB control system. Serial Number: 108540. YEAR OF MANUFACTURE: 1998. TABLE LENGTH 8000 MM TABLE WIDTH 1100 MM COLUMN HORIZONTAL TRAVEL (X) 6500 MM HEAD VERTICAL TRAVEL (Y) 1600 MM RAM CROSS TRAVEL (Z) 1200 MM SPINDLE TAPER BT50 SPINDLE SPEEDS 20 – 2000 RPM Hsdpswgd Rgofx Ag Iofg SPINDLE MOTOR 22 Kw FEED RATES/MIN 5 – 5,000 MM RAPID TRAVERSE RATE/MIN 15,000 MM AUTO TOOLCHANGER 40 STATIONS ELECTRICAL SUPPLY 415V, 3PH, 50HZ FEATURES AND EQUIPMENT Horizontal/Vertical toolchange facility, Operators platform, Head preparation for through tool coolant, Varilock R80, Coolant system with 350 Litre tank and 3 and 8 bars pressure 50 L/Min flow, Electronic handwheel, Sliding splash guard system, Heidenhain linear scales, Linear recirculating slideway system. Eimeldingen 2000mm diameter integrated rotary table with additional frontal tables extensions 5000mm x 1600mm. LENGTH 10,250 MM WIDTH EXCLUDING ADDITIONAL BEDS 4,455 MM HEIGHT 3,800 MM WEIGHT 28,000 KGS

Condition: used, Year of construction: 1995, - Heidenhain position display - Infinitely variable feed in all axes - rapid traverse in all axes Hfjdpfx Agjvhfqre Isg - Hydraulic tightening system - Rigid angular table - electric central lubrication - coolant system - workplace lighting - machine feet - year of construction 1995 Specifications Milling table: - Clamping surface: 650 x 350 mm - Clamping grooves: 5 - Slot width: 14 H7 - Groove spacing: 63 mm - Max. load: 250 kg Working range: - X-axis: 400 mm - Y-axis: 320 mm - Z-axis: 400 mm Max. Max. distances: - Top edge of table to horizontal spindle center: 140 - 540 mm - Max. table top edge to vertical head bottom edge: 430 mm Milling spindle: - Tool holder: SK40 - Vertical/horizontal speeds: 40 - 2550 rpm - Gear stages: 2 - Vertical quill stroke: 60 mm - Vertical head can be swiveled on both sides: 90 ° Feed rates: - Feed lengthwise & crosswise: 0 - 1000 mm/min - Rapid traverse lengthwise & crosswise: 4000 mm/min - Vertical feed: 0 - 1000 mm/min - Rapid traverse vertical: 3000 mm/min General data: - Drive power: 3 kW / 1410 rpm - Dimensions WxHxD: approx. 1600 x 1850 x 1350 mm - Weight: approx. 1300 kg

Condition: used, Machine is selling without rolls. Hodoy Nzdpjpfx Ag Iofg

Condition: used, functionality: fully functional, The Rambaudi RAMCENTER / RAMMATIC 601 is a heavy-duty CNC bed-type milling machine and machining center designed for precision metalworking operations. It was widely used in toolrooms, mold manufacturing, and industrial machining thanks to its rigid construction and reliable spindle performance. Typical features of the Rambaudi RAMMATIC 601 include: 3-axis CNC milling capability Large working table around 2000 × 600 mm Travels approximately: X-axis: 1250–1300 mm Y-axis: 600 mm Z-axis: 600 mm ISO 50 spindle taper Spindle speed up to about 2500–3000 rpm 30-tool magazine Heavy cast-iron frame for stability and accuracy CNC controls commonly SELCA or FIDIA depending on version Suitable for milling, boring, drilling, and contour machining of steel and aluminum parts Hsdpey Sbzyjfx Ag Ijfg The machine weighs roughly 9 tons and is known for durability and rigidity in medium-to-heavy machining applications.

Condition: used, Year of construction: 2012, Milling machines Travel distance X: 700 mm Travel distance Y :420 mm Travel distance Z: 380 mm HSC-machines Number of axis: 3 milling machine / machining center Hfedsy Nxc Nspfx Ag Iog spindle revolutions: 24000 rpm Speed range to: 24000 U/min tool changer: 38 - time input Power : 20 kW Integrated 4th axis (TSUDAKOMA)

Condition: used, Year of construction: 2011, x-travel 2600 mm y-travel 1100 mm z-travel 900 mm control Heidenhain 530 weight of the machine ca. 25050 kg Hfsdpfjy Sbl Ssx Ag Isg