Used Thread Mill Machine for sale (65,697)

Condition: used, Year of construction: 2012, functionality: fully functional, travel distance X-axis: 1,000 mm, travel distance Y-axis: 510 mm, travel distance Z-axis: 560 mm, table length: 1,200 mm, table width: 500 mm, table load: 500 kg, CNC Vertical Milling Machine DEFUM AFM BACA R1000 Vertical milling machine DEFUM AFM BACA R1000 available for sale, suitable for precise machining in both single-piece and serial production. The machine features a rigid construction ensuring stable and efficient operation. The machine is available for inspection upon prior arrangement. Technical specifications: Table: Working area: 1200 × 500 mm Number of T-slots: 5 T-slot width: 14 mm T-slot spacing: 100 mm Max. table load: 500 kg Travels: X-axis (longitudinal): 1000 mm Y-axis (cross): 510 mm Lrjdpfxeywvtno Aiien Z-axis (vertical): 560 mm Spindle: Tool taper: BT40 Speed range: 45 – 10,000 rpm Tool magazine: Number of tools: 16 + 16 Dimensions and weight: Length: approx. 2950 mm Width: approx. 2300 mm Height: approx. 2750 mm Weight: approx. 4000 kg Additional information: Transport can be arranged Machine testing possible upon request Technical support and consulting available

Condition: ready for operation (used), Year of construction: 2011, functionality: fully functional, CNC Spiral Bevel Gear Cutting Machine Gleason No 631 Year of manufacture: 2011 Control: SIEMENS 840d Ljdew Tfb Sjpfx Aiijrn Retrofitted in 2011/2012 with new control, drives, etc. The machine was fully overhauled in 2011. A new control system and drives were installed.

Condition: ready for operation (used), Year of construction: 2015, X-axis: 1600mm, Y-axis: 800mm, Z-axis: 800mm The base machine was manufactured in 1990, but was completely rebuilt in 2015 by MMD Bad Emstal, including a control system upgrade to iTNC530. (Guide rails ground and scraped, ball screw drive new or overhauled, bearings new, etc.) The machine was in NEW condition in 2015. Ljdszgr Tgspfx Aiijrn *iTNC530 *IKZ (internal cooling) for air and water through the spindle center *Rotoclear *Chip conveyor *SK 50 chain, 32 teeth *Transport traverse *Crane loading possible *The machine is temporarily connected to the power supply and can be inspected by arrangement.

Condition: used, Year of construction: 1994, functionality: limited functionality, travel distance X-axis: 1,600 mm, travel distance Y-axis: 800 mm, travel distance Z-axis: 900 mm, table width: 700 mm, table length: 1,800 mm, Anayak VH 1800 bed milling machine with 4th axis Control system: Heidenhain TNC 415 B 4th axis as a rotary table, table diameter approx. 530 mm Tool holder: SK 50 Lrsdeypxtajpfx Aiien Machine is operational, further condition unknown Machine is still connected to power Overhead crane available for loading

Condition: used, Year of construction: 2010, control Siemens Sinumerik Lredpfx Aezd Hfrsiijn spindle tunring speed 10.000 U/min engine 15 KW weight 11.000 kg In our assessment, the machine is in good used condition and can be inspected under power by appointment. Technical features & accessories: - Dividing head, 4th/5th axis Accessories, tools, and workholding devices shown are included in the scope of delivery only if specified in the additional information. Subject to change, errors in technical data and specifications, and prior sale.

Condition: used, Year of construction: 1995, x-travel 650 mm y-travel 410 mm z-travel 410 mm Control Mitsubishi Meldas 50 M max. turning speeds 6.000 min/-1 Lsdpfxex Iwg Rs Aiijrn tool taper SK 40 In our opinion, the machine is in good used condition and can be inspected under power by appointment. Accessories, tools and clamping devices shown are only included in the scope of delivery if this is noted in the additional information. Subject to changes and errors in the technical data and information as well as prior sale!

Condition: used, Year of construction: 2001, x-travel 300 mm y-travel 250 mm z-travel 251 mm Control Fanuc 16iMB max. turning speeds 15.000 min/-1 Lrjdjwth Sbjpfx Aiijn tool taper HSK-A 32 number of tool places 12 Pos. In our opinion, the machine is in good used condition and can be inspected under power by appointment. Accessories, tools, and clamping devices shown are only included in the scope of delivery if noted in the additional information. Subject to changes and errors in the technical data and information, as well as subject to prior sale!

Condition: good (used), Year of construction: 1973, pressure 0,5 - 10 t max. workpiece diameter 2 - 50 mm threading length 2000 mm Lodpfx Aszd Hhajiisrn pitch in mm 3 mm diameter of roll spindle taper 54 tool diameter 145 mm roll spindle turning speed range 41 - 129 U/min stroke 0 - 8 mm total power requirement 4,5 kW weight of the machine ca. 1,3 t dimensions of the machine ca. 1,3 x 1,2 x 1,2 m

Condition: excellent (used), x-travel 600 mm y-travel 400 mm z-travel 400 mm Control HEIDENHAIN spindle turning speed - stepless 63 - 3150 U/min quill stroke 100 mm tool taper SK 40 table surface area 630 x 400 mm total power requirement 8,5 kW Lrodjzd Hg Aspfx Aiion weight of the machine ca. 2,1 t dimensions of the machine ca. 2,5 x 1,8 x 2,0 m Electric handwheel

Condition: good (used), Year of construction: 2002, functionality: fully functional, Pressing force: 10 t Workpiece diameter - max.: 2-50 mm Control system: SIEMENS SIMATIC Total power consumption: 12 kW Machine weight (approx.): 2.5 t Lodpfx Aiszd Dibsijrn Dimensions L x W x H: 1300 x 1500 x 1600 mm Roller stroke: 80 mm Smallest/largest center distance between roller spindles: 117/197 mm Roller spindle height above machine bed: 160 mm Max. tool diameter: 175 mm Roller spindle mounting diameter: 54 mm Roller spindle mounting length: 75 mm Swiveling angle of roller spindle: -/+ 10 degrees Roller spindle speed (variable): 10-100 rpm Motor for roller spindle drive: 7.5 kW Accessories: several thread rolling tool sets

Year of construction: 2020, condition: used, No. 3233 Cross milling machine Wema Probst QBV 200 Used, year of construction 2020 The machine is in mint condition, less than 30 holes have been drilled. The QBV 200 is designed for fitting cross milling and holes in both round milled or profiled logs. This machine permits to make perfectly adjusted connections in rounded logs by three-dimensional manual adjustment. Their fields of application are e.g. the angle joints for log cabin constructions, frame constructions or the wooden material for the “landscape architecture” e.g. fences, carports, palisades, flower boxes, raised-beds, guardrails etc. Ledpfxewt Abwo Aiiern The cross milling machine consists of a base frame in welded steel construction with a swivel-mounted drilling device and gas spring-supported drilling column as well as an adjustment for the position of the drilling column. The wood is clamped with two centering vices. With the special tool (round saw), asymmetrical or end-face processing can be carried out. The machine can also drill 90° holes up to 120 mm diameter in wood by flat drill. Accessories: Collet chuck with 25 mm diameter for the tool holder, without tools Wood diameter: 60 - 200 mm Adjustable range of tools: +/- 60° for 60 mm diameter range / +/- 45° for 80 mm - 140 mm diameter range / +/- 30° for 160 mm - 200 mm diameter range Motor capacity: 2.2 kW Number of revolutions: 1200 rpm Operating voltage: 400 V / 50 Hz Transport dimensions approx. 1200 x 1400 x 2400 mm LWH Weight approx. 380 kg Sale on behalf of customer, from location near 46026 Valencia (Spain), without disassembly, without transport and assembly Disassembly, loading and transport by us optionally possible Subject to errors in the description and price To avoid possible misunderstandings, an on-site inspection is possible and recommended by appointment Sold as is Technical information, condition description, year of construction and scope of delivery according to manufacturer's brochure or previous owner, without guarantee Subject to prior sale No warranty is given for used machines, the following applies: “purchased as viewed” Pictures and videos serve as examples and do not represent the actual scope of delivery Terms of payment: Prices excl. VAT, payment before collection or shipping Terms of delivery: ex location

Condition: good (used), Year of construction: 2021, functionality: fully functional, machine/vehicle number: 223002360, milling height: 150 mm, input voltage: 400 V, overall weight: 700 kg, total length: 1,700 mm, total width: 1,000 mm, total height: 1,600 mm, input frequency: 50 Hz, milling length: 400 mm, pivoting range: 60 °, rotational speed (max.): 2,800 rpm, ELUMATEC AF 223/01 Notching milling machine Lodjzdyqnspfx Aiiorn - Rated current: 6.1 A - Power consumption: 2500 W - Swivel range: up to 60° to the right and left - Max. milling depth: 110 mm - Max. profile height: 200 mm - Max. cutter diameter: 280 mm - Cutter mounting bore diameter: 40 H7 mm Attention: The item must be collected on July 2, 2026, at a date to be confirmed. FCA D-72770 Reutlingen - loaded onto a truck.

Condition: used, Year of construction: 2002, x-travel 500 mm y-travel 500 mm z-travel 500 mm weight of the machine ca. 3800 kg Lredpfx Aiozgimkoisn

Condition: excellent (used), Year of construction: 1991, functionality: fully functional, rotational speed (max.): 12,000 rpm, Technical specifications – Elumatec AS 70/44 1-spindle copy milling machine for aluminum and PVC profiles Feature Value Machine type 1-spindle copy milling machine Milling range with stop 230 × 90 mm Milling range with copy template 230 × 90 mm Clamping range for profiles 180 × 130 mm Milling stroke 110 mm Mains connection 230/400 V, 3 ~, 50 Hz Motor power 0.74 kW Lodpezgglksfx Aiisrn Spindle speed 12,000 rpm Operating pressure 7 bar Air consumption 12 l/cycle without spray device, 24 l/cycle with spray device Dimensions (L × W × H) 720 × 650 × 1,440 mm Weight approx. 120 kg Equipment Versatile for processing aluminum and PVC profiles. Copy milling in a 1:1 ratio using templates or stops. Pneumatic material clamping. Manual feeler pin with three levels for different cutter diameters. Pulse spray device for tool cooling. Simple operation via two control levers. Quick setup and high machining accuracy.

Condition: used, Year of construction: 2007, machine/vehicle number: Mini Mill 560 type KR-MF560, travel distance X-axis: 560 mm, travel distance Y-axis: 400 mm, travel distance Z-axis: 500 mm, spindle speed (min.): 8,000 rpm, table width: 370 mm, table length: 610 mm, table load: 320 kg, overall weight: 3,200 kg, Details: Brand: KING RICH Model designation: Mini Mill 560 type KR-MF560 Type: vertical CNC milling machine Equipped with a 16-position tool changer Housing: enclosure with sliding door and viewing window Control unit: CNC control panel with monitor, keyboard and emergency stop Signal tower: 3-color signal lamp Clamping devices: 2 machine clamps on the table Chip conveyor: chip removal unit with collection tray Year of manufacture: 2007 Travel X axis 560 mm, Y axis 400 mm, Z axis 500 mm Spindle taper: SK 40 8000 rpm Table size: 610x370 mm Renishaw measuring probe TS27R Lrsdpezggivofx Aiijn Max. table load: 320 kg Spindle speed: 8000 rpm Control system: Siemens Sinumerik Machine weight: approx. 3200 kg Dimensions: approx. 1900x2000x2550 mm Condition: used

Condition: used, Year of construction: 2021, machine/vehicle number: 2021358, total height: 2,000 mm, total length: 3,600 mm, total width: 2,500 mm, overall weight: 1,500 kg, Portal milling machine, profile guides KPF-S 20, tool length sensor, vacuum table, vacuum pump from Becker, cross table, dust extraction unit Holzkraft ASA4303, tool set. Please refer to the attached expert report for details on the condition of the item. Ljdozgc T Depfx Aiiorn

Condition: good (used), Hello, Universal milling machine FY-321 for sale. Lrsdpfx Aijxykbieijn The machine is fully operational and in continuous use, with the possibility to test on site. The price stated in the advert is net and is subject to VAT. The machine can be inspected in Starachowice, at 13 Kwiatkowskiego Street. Telephone contact available from 7:00 to 16:00.

Condition: good (used), Hello, For sale: Coordinate drilling machine and universal milling machine, type 6T83-1. The machine is fully operational and in continuous use; inspection and testing on site are possible. Lsdexyi Stjpfx Aiisrn The price listed in the advertisement is net and is subject to VAT. The machine can be viewed in Starachowice, Kwiatkowskiego 13. Telephone contact available from 7:00 to 16:00.

Condition: like new (used), Year of construction: 2007, Retrofitted: 2026 Lrodpeyf Rrtefx Aiion Numerical control: NUEVO/NEW HEIDENHAIN TNC-i640 Technical features Dimensions Table dimensions: 4500 x 2000 mmNumber of T slots: 11T slots dimensions: 22 mm Traverses of axis X axis traverse: 4000 mmY axis traverse: 3000 mmZ axis traverse: 1000 mmVertical capacity (VC): 240 / 1240 mmDistance between columns: 2500 mm Milling head Auto-indexing differential head (UAD - 0,1º)Tool clamping system: HydraulicTaper nose: ISO50 (DIN69871)  /  Pull stud: DIN69872Speed range: 6000 rpmSpindle power: 30 kW Feedrates Feedrate: 5000 mm/minRapid feedrate (X / Y,Z): 15000 / 12000 mm/min Weight and dimensions Maximum weight on table: 10000 KgMachine weight approximate: 35500 KgMachine dimensions approximate: 10975 x 4770 x 5345 mm Accessories Guarding: 2 slidings doors and new perimetral wire-mesh fenceAutomatic tool changer: ATC-60 (sale option with no ATC)Chip conveyor: 1 transversalElectronic handwheel: New HR-510Coolant: External internal high pressure through spindle Sale conditions Warranty: 6 months mechanical spare partsPrice and sale conditions: On request View all technical features

Condition: good (used), Year of construction: 1991, travel distance X-axis: 560 mm, travel distance Y-axis: 500 mm, travel distance Z-axis: 400 mm, X-travel: 560 mm Y-travel: 500 mm Z-travel: 400 mm Control: TNC 360 Spindle speed: 40-4,000 rpm Lodpfx Aezgcfysiiorn Total power requirement: 7.5 kW Machine weight approx.: 2.6 t Space requirement approx.: 2.6 x 1.8 x 2.2 m

Condition: good (used), Year of construction: 1988, feed length X-axis: 1,000 mm, feed length Y-axis: 700 mm, feed length Z-axis: 600 mm, 5-axis machine Feed rate stepless: 2-4000 Total power requirement: 20 kW Machine weight approx.: 7 t Lodpszgca Rjfx Aiiorn Space requirement approx.: 7 linear meters

Condition: good (used), Year of construction: 1999, travel distance X-axis: 3,000 mm, travel distance Y-axis: 2,500 mm, travel distance Z-axis: 1,150 mm, Control: Siemens 840 D Powerline Tool holder: HSK-A63 Ledpfx Aiozgb Hisiorn Max. rpm: 16,000 X-travel: 3,000 mm Y-travel: 2,500 mm Z-travel: 1,150 mm A-axis: +/- 100 mm C-axis: +/- 181.5 mm Table size: 3,000 mm x 2,500 mm Option: External blowing air Kinematics: Fork head

Condition: good (used), Year of construction: 1986, travel distance X-axis: 710 mm, travel distance Y-axis: 600 mm, travel distance Z-axis: 455 mm, x-travel: 710 mm Lrjdpfx Ajzgb Dnjiisn y-travel: 600 mm z-travel: 455 mm Control: Dialog 4 Speed: 6300 rpm Tool holder: SK40 Quill stroke: 80 mm Table size: 550 x 1000 mm Table load: 0.6 t Total power requirement: kW Machine weight approx.: 4 t

Condition: new, functionality: fully functional, machine/vehicle number: RM310119, feed length X-axis: 787 mm, feed length Y-axis: 508 mm, feed length Z-axis: 584 mm, quill diameter: 105 mm, table width: 355 mm, table length: 1,372 mm, type of input current: three-phase, rotational speed (max.): 5,000 rpm, rotational speed (min.): 40 rpm, table load: 600 kg, overall weight: 2,390 kg, input voltage: 400 V, workpiece weight (max.): 600 kg, warranty duration: 12 months, input current: 22 A, input frequency: 50 Hz, Built-in programming cycles: Position: Spindle positioning Drilling: Simple holes, holes on a circle Milled holes: Holes made by milling cutter – straight and circular Arcs: Arcs in XY, XZ, and YZ plane Pockets: Rectangular, circular, irregular Island: Milling rectangular, circular, and irregular islands Profile: Rectangular, circular, irregular Helix: Spiral ramping Milling: Straight lines along X, Y, or Z axis or any combination Lrodpfowtnxnox Aiisn Engraving: Text engraving Thread cutting: Thread cutting with tap Thread milling: Thread milling with form cutters Copying: Copying a series of cycles Mirror: Mirror image Rotation: Rotation around an axis Repetition: Repetition of a series of cycles G-code editor Clipboard

Condition: excellent (used), functionality: fully functional, gearing type: hydrostat, fuel type: diesel, Year of construction: 1992, operating hours: 1,488 h, Equipment: all wheel drive, differential lock, low noise, tilting carriage, An authorized SUBARU dealer in Łaziska Górne offers for sale: A legendary WIRTGEN W 500 road milling machine from 1992. This compact, highly effective machine is designed for demanding road, renovation, and municipal works. This is a true classic from Wirtgen: a machine with a very robust construction, excellent maneuverability, and great operating parameters. It is ideal for milling asphalt on streets, parking lots, bus bays, sidewalks, squares, internal roads, properties, and for repair and installation work. The Wirtgen W 500 is an excellent choice for a company looking for a compact milling machine with professional capabilities, while also being simple, durable, and economical in daily operation. Key technical data: Manufacturer: WIRTGEN Model: W 500 Milling width: 500 mm Maximum milling depth: up to 160 mm Engine: IVECO diesel, 4 cylinders Engine power: 79 kW / approximately 107 hp Engine displacement: 3.9 l Operating weight: approximately 7.3 t with conveyor Working speed: 0–20 m/min Travel speed: up to 6 km/h Gradeability: up to 60% Loading conveyor: 400 mm wide belt Theoretical conveyor capacity: up to 65 m³/h Fuel tank: 165 l Water tank: 230 l Transport dimensions: approximately 3.60 × 1.70 × 2.10 m Key advantages of the machine: Compact, maneuverable, and extremely practical – it works great where larger milling machines cannot access. Professional milling width of 500 mm – ideal for surface repairs, preparing for asphalt, and removing damaged sections of the road. Powerful and durable Iveco 107 hp engine – ensures very good performance and power reserve during operation. Milling close to curbs and obstacles – the Wirtgen's design allows for precise work at the edges. Efficient loading conveyor – enables quick removal of milled material and efficient organization of work on the construction site. Solid German construction – Wirtgen is one of the most respected brands in the road construction industry. Ideal for road, paving, municipal, and construction companies. The Wirtgen W 500 is an excellent milling machine for a company that needs a proven, professional, and very versatile machine for everyday road work. Thanks to its compact dimensions, powerful engine, and 500 mm working width, the machine is well-suited for many applications, from minor repairs to larger resurfacing projects. Ljdpfxezga N Nj Aiisrn The machine presents itself very professionally and is ready for further work. Transportation to a specified address can be arranged. We invite you to contact us for more information, photos, and a video of the machine in operation. _____ The stated price is net and applies to export and for companies. A significant discount is possible for individual customers – We invite you to contact us directly by phone so that you can get your best price.