Used Thread Mill Machine for sale (91,617)

Year of construction: 1997, condition: used, thread dia. 1/16 - 2 " Lasdpfsxc Nxrex Ab Uoh threading length 165 mm turning speed range 40 - 53 U/min voltage 230 V total power requirement 1,7 kW weight of the machine ca. 50 kg - Serial-No.: 34024750 - foot switch

Condition: good (used), Thread cutting machine, pipe thread cutter -Manufacturer: Rems, thread cutting machine type Combi -Pipe size: 1/4 to 2 inches -Spindle bore: Ø 40 mm -Operating voltage: 220 volts Laedpfewq Nhxsx Ab Uoh -Dimensions: 1400/1100/H1160 mm -Transport dimensions: 1200/510/H620 mm -Weight: 100 kg

Condition: excellent (used), Year of construction: 1985, functionality: fully functional, machine/vehicle number: 62400-04, metric thread pitch (max.): 80 mm, metric thread pitch (min.): 1 mm, workpiece weight (max.): 100 kg, grinding length: 450 mm, grinding wheel diameter: 350 mm, rotational speed (min.): 72 rpm, metric thread diameter (min.): 3 mm, rotational speed (max.): 1,850 rpm, metric thread diameter (max.): 200 mm, clamping length: 700 mm, grinding wheel width: 40 mm, thread length: 450 mm, spindle speed (max.): 48 rpm, spindle speed (min.): 1 rpm, type of input current: three-phase, overall weight: 3,700 kg, input frequency: 50 Hz, power: 5.5 kW (7.48 HP), Equipment: documentation/manual, Thread and Worm Grinding Machine Reishauer NRK, Year of manufacture: 1985 The thread grinding machine is in very good condition. Includes control cabinet, mains connection 400/230V 50Hz, grinding oil cleaning centrifuge, and various accessories. Grinding length: 450 mm Clamping length: 700 mm Laedpfemidh Ssx Ab Ueh Min./max. grinding diameter: 3/200 mm Smallest/largest pitch: 0.3/80 mm Maximum workpiece weight: 100 kg Maximum lead angle: ±25° Grinding wheel diameter: 275/350 mm Work spindle speed range: 0.94–48 rpm, 18 steps Grinding wheel speed: 1850 rpm, 400 V Connected load: 15 kVA Machine weight: approx. 3,500 kg Grinding oil tank/control cabinet: approx. 700 kg Includes grinding oil supply system/oil cleaning unit (centrifuge), machine enclosure, with oil mist extraction and machine lamp. Various machine accessories such as change gears, grinding wheel flanges, index plates, and steady rest included. Inspection under power can be arranged by appointment. All technical specifications subject to errors and/or misprints. Price on request Sale exclusively to EU countries.

Condition: good (used), Year of construction: 2014, machine/vehicle number: 5890, Offer 25118 Lasdpfx Aewmnhpsb Ush Technical specifications: - Tapping capacity approx. M 3 - M 8 - Working range (swivel radius) approx. 1800 mm - Multi-position head - Speeds 8 - 700 rpm - Quick-change tool holder size 1, diameter 19 mm - Pneumatic connection 6 - 8 bar - Table base H 900 mm - Space required approx. W 1000 x H 2000 x D 1000 mm - Weight approx. 100 kg

Condition: used, Year of construction: 2003, functionality: fully functional, Thread sewing machine equipped with 4D sheet feeder with: 4 top openings, 4 bottom openings, and L.A.P. system for opening signatures with claw. Monitor, electronic programming of openings, automatic pre-setup, thread cutter. Format 32 x 42 cm. Lsdpjxdmzyjfx Ab Ujah

Condition: good (used), Year of construction: 2007, workpiece dia. 1400 mm boring diameter 100-500 mm control Sinumerik 840D Laedpfxewzmqrj Ab Ujh

Condition: excellent (used), Offer consisting of: Aster 180, built in 2006, Max. speed: 180 cycles/min - Min. sheet size: 75 x 150 mm - Max. sheet size: 320 x 420 mm Lasdpewb Uwyefx Ab Uoh

Condition: used, Year of construction: 2020, thread dia. bis M 24 turning speeds U/min thread M5 - M24 working area 2050 Rmax. working range 500 Rmin. work height max. 900 mm table surface area 700 x 900 mm oil volume 100 l engine output 3,0 kW weight - pallet system ca. 300 kg New price approx. 4.500 euros rarely used (!!) Special price on request Equipment: - electro-hydraulic thread cutting machine - large working area (radius max. 2050 mm) * including table clamping disc * smooth swivel movement thanks to built-in gas pressure dampers, among other things Lajdpfx Aoxachnob Ujh - mobile machine base frame * oil tank + hydraulic unit integrated in the base frame * hydraulic pressure gauge - stepless speed adjustment - vertical / horizontal thread cutting possible - lateral sorting of the quick-change inserts possible - connection cable with 16A plug

Condition: used, Year of construction: 1998, thread dia. 72 mm threading length 200 mm bolt thread from 6 - 72 mm bolt thread from 1/16 - 2 3/4 " inch thread 1/4 - 2 3/4 - 1/16 -2 1/2 " cutting head turning speed 35 + 70 U/min tube thread 16-63 mm tube thread 1/16 - 2 1/2 " total power requirement 2000/2300 Watt weight of the machine ca. 227 kg Laedpfjv Irh Rjx Ab Uoh dimensions of the machine ca. 1,2 x 0,6 x 1,2 m The "REMS Unimat 75" thread cutting machine is a semi-automatic high-performance machine for the efficient cutting of bolt and pipe threads. Working principle: stationary material - rotating head, manual, self-centering vice, pole-changing motor, automatic lubrication cooling, drive via robust planetary gear, right + left running, thread cutting head for chaser cutting jaws. According to the previous owner, the chaser cutting jaws can be regrinded. Enclosed is a 2 x 1 m floor tray which is placed under the machine with 2 grids. The year of construction is estimated. The machine was overhauled by Rems in around 2015 and was hardly used after that because the external threads were produced on other machines. Since then the machine has been in storage and has now been sold. Please note: New price today € 26,000.00. Machine dealer with own stock of 1600 m².

Condition: good (used), Year of construction: 2019, machine/vehicle number: 6284, Offer 24033 Technical data: Lasdport Unwjfx Ab Uoh - Tapping capacity M 3 - M 24 - Working range (swivel radius) 1800 mm - Infinitely variable speed adjustment up to 475 rpm - Digital depth adjustment - Torque 140 Nm - Quick-change tool holder size 2 diam.31 - various inserts for quick-change tool holder - Table surface 1200 x 990 mm - Table height 830 mm - Space requirement approx. W 1250 x H 2000 x D 1000 mm - Weight approx. 300 kg

Condition: used, Year of construction: 2001, functionality: fully functional, Thread sewing machine equipped with a 4D sheet feeder: 4 openings above, 4 openings below, and LAP system for section opening with claw. Monitor, electronic programming of the openings, automatic pre-setup, thread cutter. Lajdpfxexdmxls Ab Uoh

Condition: good (used), Year of construction: 1981, Dimensions (L/W/H) 660x1050x1600 mm metric thread M 33 Messing metric thread M 16 Gußeisen metric thread M 14 Stahl no. of flutes 25x10mm 2x T-Nuten Lajdeul Eg Dopfx Ab Ush throat 220 mm weight 730 kg

Condition: ready for operation (used), Year of construction: 2004, functionality: fully functional, machine/vehicle number: 00049781, workpiece diameter (max.): 50 mm, spindle diameter: 69 mm, spindle speed (max.): 5,000 rpm, stroke length: 130 mm, roll spacing: 255 mm, TECHNICAL DETAILS Contact surface: 180 mm Workpiece diameter: 4 - 50 mm Rolling pressure (infinitely variable): 0-200 kN Feed (infinitely variable): 0-50 mm/s Rolling cycles per minute: 0-86 Rolling spindles Rolling spindle diameter: 69.85 mm Distance between rolling spindles: 125 - 255 mm Spindle mounting length: 160 mm Traverse of the rolling spindle slide: 130 mm Rolling spindle speed: 3000-5000 rpm Rolling tool diameter: 130 - 200 mm Machine bed height: 800 mm Height of rolling spindle above machine bed: 160 mm MACHINE DETAILS Control system: SIEMENS SIMATIC C7 Ljdpfexbfwzox Ab Usah Voltage: 400 V, 50 Hz Dimensions & Weight Machine height: 1,600 mm Weight: 2,400 kg

Condition: new, thread dia. bis M 36 turning speeds 0-100 U/min thread M5 - M36 working area 2050 Rmax. working range 500 Rmin. work height max. 900 mm table surface area 700 x 900 mm oil volume 100 l engine output 5,5 kW weight - pallet system ca. 500 kg Furnishing: Lodoxab Igepfx Ab Usah - electro-hydraulic thread cutting machine - large working area (radius max. 2050 mm) * including table clamping disk * Swivel movement is smooth thanks to built-in gas pressure dampers - mobile machine base * Oil tank + hydraulic unit integrated in the base frame * hydraulic pressure gauge - continuous speed adjustment - vertical/horizontal thread cutting possible - Lateral sorting of the quick-change inserts possible - Connection cable with 16A plug Special accessories included / quick-change inserts: M05 / M06 / M08 / M10 / M12 / M14 / M16 / M18 / M20 / M 22 M27 / M30 / M33 / M36

Condition: excellent (used), workpiece diameter 10 - 250 mm threading length 900 mm thread pitch 0,3 - 100 mm spindle turning speed range 72 / 1700 - 2540 U/min relief of the tap 0,03 - 8 mm clamping length max. 1190 mm max. module 10 workpiece turning speeds 0,4 - 160 U/min total power requirement 13 kW weight of the machine ca. 7,4 t dimensions of the machine ca. 4,5 x 2,0 x 2,1 m Many accessories. Lodpfxew Rrhge Ab Usah

Condition: excellent (used), Year of construction: 1992, functionality: fully functional, machine/vehicle number: 620050039, overall weight: 2,550 kg, Thread rolling machine PeeWee type P20SR, used, well-maintained, low operating hours (no hour meter installed), fully functional. Can be inspected and tested under power. Forklift loading included. Includes operating manual/wiring diagram. Includes 20 sets (40 pieces) of thread rolling dies (new price per set approx. €1,100). Ljdpfxsxalinj Ab Uoah

Year of construction: 1995, condition: good (used), 2 Die Thread Rolling machine SENY, Type D-44 EH, Versatile for all types of work, manual and automatic cycles, easily adapted to automating loading,range of cycle times and roll speeds.operating pressure 100Kn, workpiwcw min 3mm max 40mm,lead 3,5 max, pitch of serrations 1,75mm max, roll length 80mm, diameter roll min 80mm max 120mm,roll spindle speeds 47-94, roll spindle diameter 40mm,distance between rolling spindles 80mm minim 165mm max, working stroke 7, feed 0,5mm/s minim 6mm/s maxim, rolling time,variable 0,1-100 seg, swivelling roll spindles +-5º,main motor 3Kw, connected electrical load 4,68kw, tank capacity 150L,aprox weigth 1100kg Lodpfx Aopwbvkeb Usah

Condition: ready for operation (used), Five older thread milling machines Mikron are available, 3x Hydraulic Thread Milling Machine Mikron 132.02, 1x Mikron 132-01, 1x Mikron 104-01 and 1x Short Thread Milling Machine Mikron 106.01, an on-site inspection is possible. Lajdpfx Abjw Sxyxe Uoh

Condition: used, Just this price to free space Laodpfx Abow Sm Drj Ujh

Condition: new, thread dia. bis M 24 turning speeds U/min thread M5 - M24 working area 2050 Rmax. working range 500 Rmin. work height max. 900 mm table surface area 700 x 900 mm oil volume 100 l engine output 3,0 kW weight - pallet system ca. 300 kg Furnishing: - electro-hydraulic thread cutting machine - large working area (radius max. 2050 mm) * including table clamping disk * Swivel movement is smooth thanks to built-in gas pressure dampers - mobile machine base * Oil tank + hydraulic unit integrated in the base frame Ljdpfxexab Iaj Ab Ujah * hydraulic pressure gauge - continuous speed adjustment - vertical/horizontal thread cutting possible - Lateral sorting of the quick-change inserts possible - Connection cable with 16A plug Special accessories included / quick-change inserts: M05 / M06 / M08 / M10 / M12 / M14 / M16 / M18 / M20 / M22

Condition: used, Internal threading machine Hagen & Goebel type HG 124 Machine no. No. 4112 Year of construction approx. 1980 Cutting capacity in steel M3 to M10 Cutting capacity in cast iron M3 to M15 Cutting capacity in brass M3 to M17.5 Laodpfx Abehgnd Aj Ueh throat depth 250 mm Pinol stroke 80 mm Table size 345 x 245 mm Spindle speed 200 - 1000 rpm Motor power 0.55 / 1.0 kW Mains connection 380 Volt, 50 Hz - 6 speed levels via belt change (3 levels via belt + 2 motor speeds) - Thread pitch via guide cartridge - 2 guide cartridges with 0.8 mm and 28 G per inch thread pitch - Table height adjustment with toothed rack via hand crank on the round column - Spindle holder with cone Ø 14.8 to 16 mm - Gear rim drill chuck Ø 1 to 13 mm Space requirement L x W x H 900 x 500 x 1800 mm Weight 260 kg Good condition

Condition: new, thread dia. M6 - M36 turning speeds 30 - 150 U/min working area max. 1200 R angle adjustable from - to 0 - 90 Grad voltage 230 V engine output 1200 W weight 65,0 kg - Includes quick-change chuck - for use with taps - for through holes and blind holes - Swivel motor unit for thread cutting - at any desired angle between 0° and 90° - Higher accuracy compared to manual thread cutting - Thread is guaranteed to be right-angled (90°) Lsdpfexab Elox Ab Ujah - High productivity - significant time savings compared to manual thread cutting - Quick-change chuck with integrated slip clutch - Includes swivel arm with large radius - for easy positioning of the tap on the workpiece - Highly economical due to low investment and maintenance costs - For thread cutting in steel, stainless steel, aluminum and non-ferrous metals Scope of delivery - Operation via touchscreen - Digital drilling depth display - Quick-change holder according to DIN - Quick-change chuck - Electric motor - 90° angle adjustment - Mounting flange Special accessories included: - BERNARDO base frame with 2 drawers * milled support surface 900 x 600 mm * including 3 T-slots (16 mm) * large storage space and 2 drawers for storing tools * 4x swivel castors including parking brake - Mounts according to DIN 376: * M5-6 / M8 / M10 / M12 / M14 / M16 / M18 / M20 / M22-24 / M27 / M30 / M33 / M36

Condition: new, thread dia. 12 M max. turning speeds 400 U/min thread M 3 - M 12 M working area 1600 R max. working range 500 Rmin. weight 16 kg Description: The AT II models have a radius of up to 1600 mm and thanks to their construction a flexible workspace. For professional use. Easy to mount on a worktop. Furnishing: - Tool holder with 6 cutter holders • M3 20111812 DIN 371 19 • M4 20111814 DIN 371 19 Ljdpfjxabbmex Ab Uoah • M6 20111816 DIN 371 19 • M8 20111817 DIN 371 19 • M10 20111818 DIN 376 19 • M12 20111820 DIN 376 19 - with slip clutch - Control valve with lubrication - Including compressed air motor / maintenance unit - Adapter connection size 1

Condition: new, thread dia. M5 - M24 turning speeds 70 - 200 U/min working area max. 1200 R angle adjustable from - to 0 - 90 Grad voltage 230 V engine output 1200 W weight 65,0 kg - with micro spray system for constant cooling & minimal Cooling lubricant consumption - Includes blow-out device to remove chips, ensuring optimal visibility on the borehole - Includes quick-change chuck for using taps for Through and blind holes - Swivel motor unit for thread cutting at any desired angle between 0° and 90° - Higher accuracy compared to manual thread cutting, thread is guaranteed right angle (90°) - high productivity, significant time savings compared to manual Threading - Quick-change chuck with integrated slip clutch prevents breaking of the tap - Includes large radius swivel arm for easy positioning tap on the workpiece - For thread cutting in steel, stainless steel, aluminum and non-ferrous metals Lodpoxaaybsfx Ab Uoah scope of delivery - Operation via touchscreen - Digital drilling depth display - Micro spray system - Blow-out device - Quick change mount - Quick-change chuck according to DIN - Electric motor - 90° angle adjustment - Mounting flange Special accessories included: - BERNARDO base frame 900 x 600 mm (Art. No.: Mounts: DIN 376: M5-6 / M8 / M10 / M12 / M14 / M16 / M18 / M20 / M22-24

Condition: new, thread dia. 20 M turning speeds 400 U/min thread M 4 - M 20 M working area 1900 Rmax. working range 200 Rmin. Description: The AT models have a radius of up to 1900 mm and their construction a flexible workspace. For professional use. Easy to mount on a worktop. Furnishing: - including 7 thread cutting inserts • M3 20111812 DIN 371 19 • M6 20111823 DIN 371 31 • M8 20111824 DIN 371 31 • M10 20111826 DIN 371 31 • M12 20111827 DIN 376 31 • M16 20111829 DIN 376 31 • M20 20111831 DIN 376 31 - Control valve with lubrication - Including air motor - Adapter connection size 2 - The cutting head can be pivoted vertically downwards by 90 ° - The cutting head is pivoted and rotatable through 360 ° - Operating instructions in German Ljdpfexaaa Iex Ab Ueah * without the perforated table as per Fig.