Used Thermal Transfer Label Printer for sale (7,595)

Condition: ready for operation (used), Diameter range: 45 mm – 114 mm Bodpfxeyq Nv Ie Amysdf Height range: max. 238 mm Label height: 23 mm – 230 mm Label length: 117 mm – 380 mm Production capacity: up to 50,000 cans per hour

Condition: ready for operation (used), Year of construction: 1996, functionality: fully functional, machine/vehicle number: 6296075, Technical specifications as per original manufacturer: Diameter range: 57 mm - 110 mm Label height: 25 mm - 235 mm Label length: 190 mm - 430 mm Production capacity: up to 300 c.p.m. Tooling for approx.: 73 mm Bjdjtql Hdspfx Amysdf Labels: wrap-around labels

Condition: ready for operation (used), Diameter range: 50 mm - 135 mm Height range: 80 mm - 340 mm Heads: 10 Production capacity: 2,500 - 6,500 cans per hour Label length: 40 mm - 130 mm Two labelling stations (front and back labelling) Bdjdpfoyv Addex Amyof Includes several tooling sets for different bottle types

Year of construction: 2014, operating hours: 3,100 h, condition: excellent (used), functionality: limited functionality, MYDATA MY500JP Jet Printer 2014 in excellent condition with exceptionally low operating hours (approximately 3,100). Kept and used in a clean environment. Complete system supplied with offline programming PC, MYCAM JP software, 2D Inspection & Repair option, SMT Adhesive option, manual load tables and associated documentation. There are also some spares included which we can bundle into a sale deal for an appropriate price. Visits/Inspection are welcome by appointment. An excellent opportunity to acquire a MY500JP suitable for high-mix, low-to-medium volume SMT production. The machine exhibits an intermittent issue affecting movement on the X-axis during camera positioning. On occasion, a slight jitter or vibration is observed, which can prevent the vision system from reliably locating the PCB fiducial during initial board loading or machine initialisation. The fault is intermittent and does not occur consistently. Most of the time, reloading the PCB allows operation to continue normally. Occasionally, a machine restart is required. The root cause has not been determined, but the issue appears to be associated with the X-axis motion control system. Potential areas for investigation include the servo amplifier (drive), encoder, encoder cable or other associated motion control components. Despite this intermittent behaviour, the machine was used in active production of complex PCB assemblies, including fine-pitch BGA boards, for approximately 12 months prior to being replaced as part of an equipment upgrade. The machine is therefore offered for sale on the understanding that diagnosis and repair of this intermittent fault is outstanding. Bdjdpozlx E Tofx Amyef Included: MYDATA MY500JP (2014) Approx. 3,100 operating hours MYCAM JP offline programming PC and software 2D Inspection and Repair option SMT Adhesive option Manual loading Technical documentation 4pcs AE04 ejectors Bundle of spare parts Not included: Solder paste Cassette (Holding Assembly), Solder paste, Purge Gel, Filter boxes Conveyors

Condition: good (used), Year of construction: 2021, functionality: fully functional, 21x Logopak 410 VM90 industrial label applicators (print & apply) – manufactured in 2021 Bdsdpfxjzltq Rj Amysf A total of 21 identical Logopak 410 VM90 print & apply labeling systems are for sale. The units were manufactured in 2021 and put into operation in a modern logistics center starting in 2023. The labeling systems are being sold due to a process change and/or facility modernization. The systems are in working and well-maintained condition and can be inspected by appointment. Technical data: Manufacturer: Logopak Model: 410 VM90 – T01P06 Year of manufacture: 2021 Voltage: 100–240 V AC, 50–60 Hz Current consumption: 8 A Condition: Used Functional CE marking present Scope of supply: Logopak 410 VM90 label applicator Control cabinet with operating panel Machine frame Signal lamp as shown in the pictures Notes: A total of 21 identical units are available. Sale individually or as a complete package is possible. Inspection possible by arrangement. We will gladly send further photos and technical information upon request.

Condition: like new (used), Year of construction: 2022, functionality: fully functional, total height: 1,770 mm, total width: 600 mm, total length: 617 mm, input voltage: 230 V, type of cooling: air, Equipment: documentation/manual, type plate available, Thanks to the enclosed construction cartridge system, this 3D printer is ideally suited for prototype construction, the dental field, or even for training purposes, as there is no contact with the metal powder – neither during the component preparation nor during the printing process itself. AL3D-METAL 200-100 3D metal printer for additive manufacturing LASER TYPE: Fiber laser Wavelength: 1070 nm Average power: 200 W Bdodpfezlnh Rex Amyjf Operating mode: CW Focus diameter: 50 μm Scanning speed: max. 5 m/s Process parameters: Option to comprehensively influence the process parameters INCLUDES 9 CONSTRUCTION CARTRIDGES: Build volume: r Ø 100 mm; z 60 mm Layer thickness: 10 - 50 μm Achievable component density: > 99 % SOFTWARE AL3D-OS Operation: via 15.6" touchscreen, keyboard, and mouse Connectivity: 1x Ethernet; 2x USB CAD import file format: STL Print preparation: Simple support generation. Slicer integrated into the software.

Condition: excellent (used), Year of construction: 2016, The Durst Rho 512R is an industrial super-wide-format UV inkjet printer designed for high-volume production of banners, mesh, textiles, billboards, and other flexible media. Four colours 5 meter UV digital printer. 600.000m² In production Decommissioning and loading on truck can be organized. Installation and training available upon request. Very good status, under Durst service contract For further specifications please refer to enclosed data sheet. Key Technical Specifications Specification Value Printing technology UV inkjet, roll-to-roll Maximum media width 5.2 m (204.7 in) Bedpfxezil Nae Amyedf Maximum print width 5.0 m (196.8 in) Printheads Durst Quadro Array 12M Drop size 12 picoliters Resolution Up to 900 dpi (some later documentation and Plus models state up to 1200 dpi) Maximum production speed 350 m²/hour Technology Variodrop variable droplet technology Ink type UV-curable Rho Roll Ink (VOC-free) Ink channels CMYK standard; optional Light Cyan, Light Magenta, White (configuration dependent) Roll capability Up to three 1.6 m rolls simultaneously Printing mode Continuous unattended roll-to-roll production Textile option Available for mesh without liner Border cutter Integrated

Year of construction: 2024, condition: used, machine/vehicle number: 2333470, Thermal reactor Bdsdpfxsziltro Amyjf

Condition: used, EOS Type: P100 Technical Data: External dimensions: 1320 mm x 1067 mm x 2204 mm Technology: SLS Material class: Polymers Materials: PA220 Build volume: 200 x 250 x 330 mm Laser type: CO2; 30 W Capable of producing delicate components with wall thicknesses down to 0.4 mm. Bdsdpfx Ajzii Utemysf Fits through a standard door (1067 mm width); therefore, it can be installed in regular premises. + 6 filled powder containers PA2200 (PA12) + 2 build frames 400 V +6%/-10% at 50/60 Hz; CEE 5-pole Condition: used Scope of delivery: (see image) (Subject to technical modifications and errors. All information is provided without guarantee!) For further questions, we are happy to assist you by phone.

Condition: good (used), 3D Systems Type: ProX™ 800 ProX™ 800 3D Production Printer by 3D Systems – High-performance SLA Printer Machine has been regularly maintained Operating hours: 18,700 (as of 18.04.2023) Not operated after 18.04.2023 Note: Annual servicing carried out up to dismantling For sale is a used ProX 800 stereolithography (SLA) production printer from 3D Systems. This large-format SLA system is equipped with the latest printhead technology and is suitable for high-precision components and industrial applications (e.g. automotive, aerospace, medical technology). Additional features: - Automatic material replenishment system and pre-assembled material supply module (quick module change, uninterrupted operation) - 3D-Manage™ software for CAD model and print job management - Touchscreen operation on the device (Print3D Pro™) - Status/signal light module, central user interface - Comprehensive safety system including laser safety monitoring (Class I), emergency stop switches, and interlocks - Detailed maintenance and error diagnostics functions - Material container (MDM) Bdodpfjzii Umox Amysf Technical Data: - Printing technology: Stereolithography (SLA) with frequency-tripled Nd:YVO4 UV solid-state laser (355 nm, max. 3 W) - Maximum build volume: approx. 650 × 750 × 550 mm - Dimensions (L × W × H): approx. 1370 × 1600 × 2260 mm - Weight: approx. 907 kg - Resolution: up to 0.00127 mm (laser spot size), 4000 DPI - Accuracy: ± 0.025–0.05 mm per inch - Materials: Wide range of Accura resins (tough, transparent, high-temperature resistant, biocompatible, etc.) Electrical connection: - Power supply: 200–240 V AC - Frequency: 50/60 Hz - Phase: Single-phase - Fuse: 30 A - Weight: approx. 1200 kg incl. material module Condition: used Scope of delivery: (see picture) (Specifications and technical details subject to change and errors!) If you have further questions, we are happy to answer them by phone.

Condition: used, functionality: fully functional, Year of construction: 2017, total length: 2,210 mm, total height: 1,448 mm, total width: 1,238 mm, type of input current: three-phase, input voltage: 400 V, HP Multi Jet Fusion 4200 additive manufacturing system, tested and fully functional. An industrial solution for the series production of end-use parts in PA12 nylon. THE SYSTEM INCLUDES: - HP Jet Fusion 4200 printer - HP Processing Station (powder processing station) - Build Unit(s) MAIN FEATURES: - Technology: Multi Jet Fusion (MJF) - Build volume: 380 × 284 × 380 mm - Material: PA12 (nylon 12) - Production of short and medium series of functional end-use parts - Year of manufacture: 2017 - Three-phase power supply APPLICATIONS: industrial, automotive, medical (prosthetics and orthotics), consumer goods, on-demand spare parts. Equipment from a professional service bureau. Available for pre-purchase inspection. Location: Spain. Loading and transport can be arranged. Bsdpfx Amey U H Idoyodf Please inquire about the detailed inventory of Build Units, consumables, and the included powder stock.

Year of construction: 2023, condition: as good as new (ex-display), Feeder Media width min. 100 mm max. 216 mm Page size min. 76.2 mm max. 254 mm * Max. 1200 mm in sequential mode Media diameter max. 254 mm Core max. 76 mm Media weight max. 10 kg Laminator Media width Min. 80 mm Max. 195 mm Bdedpfot D E Aisx Amysf Media size max. length 200 m or 210 mm Outer diameter Inner diameter max. 76 mm Max. outer media diameter: 200 mm max. inside: 25.4 mm Media weight max. 8 kg Cutter System gate cut with cutting plotter Motor Digital servo motor Cutting force 20 - 300 gf in 31 steps Max. Cutting area No R. mark: 203 mm x 300 mm R. mark: 186 mm x 1200 mm Max. Cutting speed 600 mm / s General data Max. Media diameter separating unit 220 mm Core: 25.4 mm Number of slitters 3 Interface USB2.0 (High Speed) Network (Ethernet 10BASE-T / 10BASE-TX) Display LCD with 128 x 64 pt Power source AC100-120V, AC200-240V 50/60Hz (automatic change) Max. Power consumption 170 VA Operating conditions 10 - 35°C / 35-75% relative humidity (non-condensing) Operating conditions for guaranteed accuracy 16 - 35°C / 35-70% relative room humidity (non-condensing) Dimensions (WxHxD) approx. 1904 mm x 994 mm x 1297 mm Weight approx. 151 kg

Condition: excellent (used), functionality: fully functional, Year of construction: 1999, 1. BARGSTEDT TBP16/DG/30/22/S Portal Loading System Bsdpszh Uziefx Amyjdf Vacuum portal for raw sheet loading (fixed edge on the right) • Workpiece weight up to 100 kg • Performance up to 5 cycles/min • Pallet return + light curtain protection 2. BARGSTEDT TPP20/28/21/S Pallet Magazine Empty pallet supply for loading • Capacity approx. 12 pallets • Stacking height max. 1,800 mm

Condition: excellent (used), Great deal on a KBA 8-color flexo press + 1 in-line flexo unit. Manufactured in 2017, with a web width of 900 mm. Can be seen in operation and is in very good condition. Bsdpfszlbxcox Amyedf

Condition: used, Year of construction: 2008, Overview: The ENOS Eticap is a fully automatic labelling machine designed for the application of wet-glue labels on cylindrical bottles. Built by the Italian manufacturer ENOS and delivered in 2008, the system was used in production until 2020 and has since been taken out of service and stored. The machine is equipped with two wet-glue labelling units: one for front and neck labels and one for back labels. The conveyor system supports left-to-right operation. Technical Data:  - manufacturer: ENOS, Italy - model: Eticap - year of manufacture: 2008 - labelling Heads: 2 (wet-glue heads) - Head 1: front and neck labels - Head 2: back labels - operation Direction: Left to right - production Capacity: 4.000/h - adjusted for: cylindrical glass bottles - 0,7 L = Ø75mm - 1,0 L = Ø86mm - condition: Stored off-line since 2020, machine in a good condition - actual label sizes:  Bdedpfx Aoy Scb Iemysf - front label: 131mm height, 77mm width - back label: 114mm height, 66mm width

Condition: used, Year of construction: 1993, Overview  Bdsdpfx Ajy Hmtwemyef This hotmelt labelling machine for precut paper labels was manufactured in 1993 by Italy PE LABELLERS. The machine is designed for labelling of PET bottles. Production stopped in July 2009 due to the permanent closure of the plant. The machine is still installed and can be visited in static on request. It is available immediately. Technical data - Capacity: approx. 7,200 bph - Formats: 1.5 L / 2.0 L - Application: PET - Configuration: Hotmelt labelling machine for precut paper labels

Condition: used, Year of construction: 2015, Overview This automatic self-adhesive labelling machine was manufactured in 2015 by Not provided ENOS. The machine is designed for flexible labelling of bottles in beverage, wine, and spirits production. It is described in good condition. Maintenance work was carried out in summer 2025, including replacement of the pressure block and bottle contact rollers. Availability is on request. Information regarding installation status, visit possibility and reason for sale is not provided. Bdsdpfx Amey Hkghsysf Technical data - Capacity: - approx. 1,200 bottles/hour (standard labels) - up to approx. 1,500 – 1,800 bottles/hour (small labels) - approx. 1,100 bottles/hour (front and back from one roll) - Formats: Diameter 50 – 100 mm, conical bottle shapes - Application: Bottle labelling (beverage, wine, spirits) - Configuration: 1 labelling station with 3-roll system for front and back labelling from one roll - Label positions: Front, back - Incl. Capsule applicator, Capsule shrink unit, Conveyor system and Accumulation table

Condition: used, Year of construction: 2000, Overview This cold glue labeling machine was manufactured in 2000 by Krones. The machine is designed for the application of cold glue labels on bottles. The machine is equipped with three labeling aggregates (front, back, and neck/seal label) and operates with a 20-head rotary table, making it suitable for medium-speed beverage production lines. The unit includes an integrated Krones Checkmat inspection system for quality control and comes with 11 bottle formats (0.5 – 1.0 L). Maintenance was performed as required. Technical data - Capacity: up to approx. 15,000 bph - Formats: 0.5 L – 1.0 L, 11 formats - Application: Cold glue labeling of bottles Bedpoy Azv Sefx Amyedf - Configuration: 20-head rotary table, 3 labeling aggregates - Label positions: Front, back, neck/seal label - Utilities: Standard Krones control system - Incl. 3 glue pumps for cold glue system, Inspection system (Krones Checkmat), Format parts, Documentation

Condition: used, Year of construction: 2000, Overview This self-adhesive labelling machine was manufactured in 2000 by Germany KRONES. The Autocol 1200-20 TA is designed for the application of self-adhesive labels on bottles. The machine is configured with three labelling stations (front, back, and neck/seal label) and includes a Taxomat label feed system. It is suitable for standard beverage packaging applications and is equipped with an integrated Checkmat inspection system for quality control. The machine is currently still installed and will be available from February 2027. The unit is described as used and maintained based on operational requirements. Technical data - Capacity: up to approx. 15,000 bph Bdedpfxsy Azu Us Amyjf - Formats: 0.5 L – 1.0 L (15 formats) - Application: Self-adhesive labelling of bottles - Configuration: 3 labelling stations (front / back / neck/seal) - Label positions: Front, back, neck/seal - Incl. Inspection system | KRONES | Checkmat

Condition: used, Year of construction: 2017, Overview This GERNEP Soluta 6-480/2 1SK TaxU labelling machine was manufactured in 2017 and is designed for the application of self-adhesive labels in beverage bottling lines. The machine is configured with one self-adhesive labelling station and is specifically adapted for swing-top (bail closure) system is equipped with a HERMA labelling unit and supports a capacity of up to 2,500 bottles per hour, with a variable speed range from 800 to 3,000 bottles per hour. The machine is designed for U-seal label application and includes alignment systems for proper positioning of swing-top closures. Bdodpfeyzc H Nox Amyjf With modern control technology based on Siemens S7-1200 and a Sütron touch panel, the machine offers reliable operation and easy integration into existing production lines. Technical Data - Direction of operation: RM - Capacity: approx. 2,500 bottles per hour - Speed range: approx. 800 – 3,000 bottles per hour - Labelling technology: Self-adhesive - Labelling station: - 1 × self-adhesive labelling unit (HERMA) - Label speed: approx. 40 m/min - Roll diameter: 300 mm - Label height: up to 240 mm - Bottle Formats - Bottle types: Swing-top (bail closure) bottles, other bottles also possible - 500 ml – Ø 66 × 280 mm - 1,000 ml – Ø 85 × 316 mm - Label Data - Label dimensions: approx. 160 × 17 mm - Application type: U-seal label - Electrical Data - Control system: Siemens S7-1200 - Operator panel: Sütron 7” - Power supply: 400 / 230 V - Frequency: 50 Hz - Equipment / Features - Alignment system for swing-top closures  - Bottle orientation system in infeed star - Conveyor height: approx. 1,000 mm - Electrical cabinet lighting - Socket integrated in control cabinet.

Condition: used, Year of construction: 2021, Overview Bedpjyzcyvefx Amyodf This rotary cold glue labelling machine was manufactured in 2021 by Germany GERNEP. The machine is designed for cold glue labelling of glass bottles, primarily in the beer industry. It is equipped with one cold glue labelling aggregate and is prepared for the installation of an additional unit. The system features a mechanical bottle table drive (control cam system) and a Krones glue pump for consistent label application. Technical data - Capacity: approx. 5,000 bottles/hour - Speed range: approx. 1,000 – 6,000 bottles/hour - Formats: 0.33 L / 0.5 L glass bottles - Application: Labelling of glass bottles (beer) - Configuration: Rotary machine with 1 cold glue labelling aggregate (prepared for 2nd unit) - Label positions: Body / wrap label, neck / chest label - Utilities: 400 V / 50 Hz / GND / N Scope of Delivery - Labelling machine | GERNEP | Labetta 4/3/8 480 1A | 2021 | Rotary cold glue labeller with 1 aggregate (prepared for second unit) - Glue system | Krones | Glue pump - Control system | GERNEP | Touch panel

Condition: used, Year of construction: 2019, Overview This rotary cold glue labelling machine was manufactured in 2019 by Germany GERNEP. The machine is designed for cold glue labelling of glass bottles, particularly in the wine industry. It is equipped with two cold glue labelling aggregates for the application of body, neck ring and back labels. The machine features a servo-driven bottle table and a Krones glue pump for precise label application. Technical data - Capacity: approx. 5,000 bottles/hour - Speed range: approx. 1,000 – 5,500 bottles/hour - Formats: Bdedpfx Amoyzcycoysf - 0.75 L Bordeaux (H=309 mm, Ø74 mm) - 0.75 L Schlegel (H=330 mm, Ø76 mm / H=350 mm, Ø78 mm) - 1.0 L Schlegel (H=309 mm, Ø89 mm) - 0.75 L Burgunder (H=297 mm, Ø82 mm) - Application: Labelling of glass bottles (wine) - Configuration: Rotary machine with 2 cold glue labelling aggregates - Label positions: Body (front), neck ring, back - Utilities: 400 V / 50 Hz / 3 Phase / N / PE Scope of Delivery - Labelling machine | GERNEP | Labetta 4/3/12 784 2A SD | 2019 | Rotary cold glue labeller with 2 aggregates - Glue system | Krones | Glue pump - Control panel | GERNEP | Touch panel

Condition: used, Year of construction: 2011, Overview This rotary labelling machine (cold glue + self-adhesive) was manufactured in 2011 by Germany GERNEP. The machine is designed for high-speed labelling of glass bottles, particularly in the spirits industry. It combines cold glue and self-adhesive labelling technologies, allowing flexible application of multiple label types including body, back, neck ring and additional labels. The machine is equipped with 2 cold glue aggregates and 2 self-adhesive labelling units (HERMA). Bdjdpfoyy Ad Sjx Amyof Technical data - Capacity: approx. 12,000 bottles/hour - Speed range: approx. 3,000 – 18,000 bottles/hour - Formats: 700 ml / 750 ml / 1,000 ml glass bottles - Application: Labelling of glass bottles (spirits) - Configuration: Rotary machine, 2 cold glue units + 2 self-adhesive units (HERMA) - Label positions: Body (front), back, neck ring, additional labels - Utilities: 400 V Scope of Delivery  - Labelling machine | GERNEP | Labetta 6/4/22 1056 2A 2SK SD | 2011 | Rotary labeller with cold glue and self-adhesive units - Self-adhesive units | HERMA | 2 units, up to 70 m/min - Control system | B&R | Touch panel control

Condition: used, Year of construction: 2009, Overview  This rotary roll-fed labelling machine was manufactured in 2009 by France SIDEL. The Rollquattro F15 18T is designed for roll-fed labelling of PET bottles in beverage production lines. The machine operates with a rotary system with 18 bottle plates and is configured with mechanical cam control and manual label splicing.  Technical data Bdodoyyb Snepfx Amysf - Capacity: approx. 18,000 bottles/hour - Formats: 0.5 L / 1.0 L / 1.5 L / 2.0 L - Application: Roll-fed labelling of PET bottles - Configuration: Rotary machine with 18 plates, mechanical cam drive, manual label splicing - Utilities: 400 V / 50 Hz / 23 kW / 46 A Scope of Delivery  - Labelling machine | SIDEL | Rollquattro F15 18T | 2009 | Rotary roll-fed labeller with 18 plates - Cooling unit | Kelvin Cool-Power | External cooling unit - Control system | Control panel with process indicators

Condition: used, Year of construction: 2002, Overview This ENOS Millenium self-adhesive labelling machine was manufactured in 2002 and is designed for the application of pressure-sensitive labels on glass bottles, particularly in wine production environments. The machine is equipped with three labelling stations, allowing the application of front, back, and seal labels. With a capacity of approximately 2,500 bottles per hour, the system is suitable for small to medium-sized production lines. The machine supports Bordeaux and Burgundy bottle formats, with corresponding format parts included. Its modular design and self-adhesive technology provide flexibility for different label applications and bottle types. Technical Data - Capacity: approx. 2,500 bottles per hour - Labelling technology: Pressure-sensitive (self-adhesive) Bdodpfxsyxxxcj Amysf - Number of stations: 3 - Applications - Front label - Back label - Seal label - Bottle Formats - Container type: Glass bottles Supported formats: - Bordeaux - Burgundy - Format parts: Included for both bottle types