Used Thermal Platesetters for sale (1,260)

Condition: excellent (used), Year of construction: 2023, functionality: fully functional, machine/vehicle number: 140563, power: 1,300 kW (1,767.51 HP), overall weight: 2,600 kg, total width: 1,424 mm, total length: 3,787 mm, total height: 2,402 mm, pressure: 6 bar, heating capacity: 1,300 kW (1,767.51 HP), fuel: domestic gas H, operating pressure: 6 bar, Equipment: hot water, Bosch Unimat UT-L 10 industrial low-pressure hot-water boiler, manufactured in April 2023. Technical data: - Manufacturer: Bosch Industriekessel Austria GmbH - Model: Unimat UT-L 10 - Year of manufacture: 2023 - Serial number: 140563 - Rated thermal capacity including ECO: 1,300 kW - Maximum allowable pressure: 6 bar - Hydraulic test pressure: 9.6 bar - Allowable temperature range: 0–110 °C - Total boiler volume: 1,370 litres - Approximate dimensions: 3,786 × 1,424 × 2,402 mm - Approximate net boiler weight: 2,600 kg - Heating medium: low-pressure hot water - Design: three-pass flame-tube/smoke-tube boiler - Flue/appliance classification: EN 1749, B23 - CE marking: CE 0085 - Manufactured in Austria Chjdpfxjzp Rmqj Ai Nja - Type plate available The stated dimensions and weight are manufacturer reference values for the UT-L 10 boiler body. Actual dimensions and transport weight may vary depending on the installed burner, economiser, fittings and control equipment. Fuel type and electrical connection data must be taken from the installed burner and control-cabinet nameplates. The exact scope of supply, operating condition and included documentation should be confirmed before purchase. Sale subject to prior sale and verification of the technical information. Included equipment, as shown in the photographs: - Natural-gas regulating and supply line - Gas pressure regulator - Gas meter - Pressure gauge - Motorised Bosch valve actuator - Butterfly shut-off/control valves - Associated pipe sections, flanges, gaskets and mounting components The components are supplied dismantled. Completeness and suitability for the buyer’s installation must be verified before commissioning.

Condition: used, mileage: 72,451 km, power: 140 kW (190.35 HP), first registration: 01/2023, fuel type: diesel, axle configuration: 4x2, wheelbase: 3,200 mm, fuel: diesel, CO₂ emissions: 168 g/km, color: black, gearing type: automatic, number of gears: 9, emission class: euro6, Year of construction: 2023, Equipment: ABS, air conditioning, airbag, central locking, cruise control, electric window regulation, electronic stability program (ESP), fog lights, full service history, navigation system, onboard computer, parking heater, power mirror, seat heater, sliding door, tire pressure monitoring, = Additional Options and Equipment = - Adaptive Cruise Control - Attention Assist - Automatically Dimming Exterior Mirrors - Automatic Headlights Chodpfxsx N Ik Ns Ai Nea - Automatically Dimming Interior Rearview Mirror - Body-Coloured Exterior Mirrors - Outside Temperature Display - Heated Exterior Mirrors - Passenger Airbag - Car Kit - Roof Rails - Electrically Operated Tailgate - Front Electric Windows - Electrically Folding Exterior Mirrors - Electronic Brakeforce Distribution - Driver Airbag - Remote Central Locking - Tinted Glass - Comfort Seats - Rear Head Airbags - Front Head Airbags - Cornering Lights - LED Headlights - Leather Steering Wheel - Alloy Wheels (17") - Lumbar Support - Metallic Paint - Front Centre Armrest - Multifunction Steering Wheel - Multimedia Capability - Fog Lights - Emergency Brake Assist - Parking Aid - Radio with DAB - Rain Sensor - Reversing Camera - Headlight Assist - Front Side Airbags - Right Side Sliding Door - Heated Front Seats - Sports Suspension - Immobilizer - Body-Coloured Bumpers - Thermal Glass - Blind Spot Monitoring = Further Information = General Information Number of doors: 4 Technical Information Number of cylinders: 4 Engine capacity: 1,950 cc Acceleration (0–100): 9.1 s Maximum speed: 204 km/h Weights Curb weight: 2,046 kg Payload: 1,054 kg Gross vehicle weight: 3,100 kg Max. towing capacity: 2,000 kg (unbraked 750 kg) Interior Interior: black Consumption Average fuel consumption: 6.4 l/100km Servicing, History, and Condition Booklets: Available (dealer serviced) APK (roadworthiness inspection): New TÜV upon delivery Number of keys: 2 (2 remote controls)

Condition: used, mileage: 56,562 km, power: 75 kW (101.97 HP), first registration: 10/2024, fuel type: diesel, empty load weight: 1,907 kg, overall weight: 2,800 kg, wheelbase: 3,200 mm, fuel: diesel, color: white, driver cabin: other, gearing type: mechanical, emission class: euro5, number of seats: 2, Year of construction: 2024, Equipment: ABS, air conditioning, airbag, central locking, cruise control, electronic stability program (ESP), immobilizer system, navigation system, onboard computer, parking sensors, power assisted steering, second-hand vehicle warranty, soot filter, traction control, E7M MBUX multimedia system, FR8 reversing camera, W65 tailgate, E07 hill-start assist, LA2 headlight assistant, MJ8 ECO start-stop function, XY5 model year 5, C6L multifunction steering wheel, JK5 instrument cluster with color display, MS1 cruise control, F68 heated and electrically adjustable exterior mirrors, V20 upper load compartment trim, V30 side load compartment trim, MX0 BlueEFFICIENCY package, SA6 passenger airbag, E1D digital radio (DAB), SB1 comfort driver's seat, SE5 lumbar support driver's seat, VV9 roof frame lashing points, D50 full partition wall, IL5 left-hand drive, RG1 tires 205/65 R16, RR6 spare wheel with jack, RS3 steel wheels 6.5 J x 16, F66 lockable glove compartment, H20 all-round thermal insulation glass, LE1 adaptive brake light, BA3 active brake assist, JB4 active lane keeping assist, JW8 Attention Assist, EY5 Mercedes-Benz emergency call system, JA7 blind spot assist, EL8 2-way speakers in front, GE1 6-speed manual transmission TSG 380, KP7 emission control SCR generation 4, 805 AEJ X4/1, V3L all-weather floor mats, Q00 trailer load 0 kg/lbs, Z2K BASE, CF0 basic chassis, IB6 series C447 Vito/V-Class, S09 standard passenger seat, BB6 brake booster failure compensation, BB7 CO2-optimized brake system, EW6 Digital Extra: Remote Services Plus, E4S Digital Extra: Smartphone Integration, E7B Digital Extra: Preparation for navigation, MT5 emission class Euro 5b+ N1, M72 vehicle HVO capable, M60 generator 14 V / 250 A, MG9 generator management, MK8 speed limit 210 km/h, XG6 weight variant 2,800 kg, J55 seatbelt warning for passenger, HH9 semi-automatic TEMPMATIC air conditioning, KB5 main tank 70 liters, A1N rear axle shaft brand Neapco, V43 wooden floor, 502 intelligent speed assistant (ISA), ZM0 panel van, HI1 climate zone 1 (cold/comfort), F3Z comfort boot locking, LC4 comfort roof control panel, JH3 communication module (LTE) for digital services, IK0 complete vehicle, Z0Q customer order VdZ, CL1 steering wheel adjustable in tilt and height, XO9 Mercedes-Benz MobiloVan with DSB and GgD, FF1 center console with storage compartment, XZ2 model generation 2, XM0 model facelift, XM7 Mopf II, FY7 multi-button remote control, LE6 night lighting, EY6 breakdown management Notice Chodpfjyuzatox Ai Nja Despite our careful checking of all our price labels, errors may still occur. Some of these are caused by transmission errors in the systems of various platform providers. Errors on our part cannot be ruled out either. Therefore, we would like to point out that all information is provided without guarantee and does not constitute any legal claim. Price labels also cannot be considered part of a contract. Should you place special value on a specific feature of our listing, please let us know at the conclusion of contract. Thank you for your understanding!

Year of construction: 2014, condition: good (used), functionality: unexamined, Description For sale is an industrial DC power supply / direct current power supply, Thumm SNT 20, from a decommissioned system. The unit is designed for high direct currents and is suitable for various industrial applications, testing systems, special machine construction, electroplating, coating, or process systems. Technical data according to the nameplate: Manufacturer: Thumm Type: SNT 20 Device type: DC power supply / direct current power supply Csdpjzap T Sjfx Ai Neha Power: 30 kW Mains input: 3AC 400 V / PE, 50/60 Hz Output voltage: 1DC 0–30 V Output current: 1DC 0–500 A Regulation: Constant current / constant voltage Setpoint input: 0–10 V = 0–100 % for current and voltage Cooling: controlled fan Device protection: short-circuit proof, overload protection, thermal protection, mains monitoring Duty cycle: ED 70 % Year of manufacture: 05/2014 Weight: approx. 100 kg Device No.: 21401682 / 9-24 Condition The unit comes from a decommissioned industrial system. It is sold in its removed condition. We have not performed a functional test. See pictures for the visual condition. Inspection possible by appointment. Scope of supply The DC power supply / module shown in the pictures is for sale. Other identical or similar modules may be available upon request. Price A package price is possible when purchasing multiple units. Notes Sale exclusively to commercial customers. Subject to prior sale and errors. Sale is made without warranty, guarantee, or right of return.

Year of construction: 2022, condition: good (used), functionality: fully functional, REF: MM6470 Volumetric filling and sealing system for pre-made pouches (doypacks). Rotary Volumetric Filler mounted on stainless-steel frame with 1 x Pre-made pouch (doypack) filling and sealing machine. Manufacturer - Qinyao/Top Y Machinery. Date of manufacture - 2022. Setup of volumetric filling system: Stainless-steel large infeed hopper over Rotary volumetric cup filler (freestanding) with nylon volumetric cups. Setup of pre-made pouch fill and seal machine: Twin-lane bag magazine (lanes 1# and 2#), vacuum pick-up and bag opening (1#Sucking, 2#Sucking, Pick Up Bag, Open Bag), front and back sealing jaws with sponge-faced grippers, Siemens Smart Line HMI, Omron controllers for front jaw, back jaw and printer, thermal transfer ribbon coder and discharge chute. Speed – variable up to 20 packs / minute, depending on fill volume. Pack size range – can handle doypacks up to 300mm long x 250mm wide. Controls – Siemens Smart Line HMI touch-screen control with easy-to-use programme settings. Tooling – 1 x Set of volumetric cups, previously used to pack whey protein products (1000g volume), dried fruit (200g volume) and other dry ingredients (depends depending on product). Supplied with a fill head attachment for plastic scoops as the material is deposited. Electrical requirements - 3 phase. Requires compressed air supply. Chedpfx Aiezp E T Ss Nsa Condition – Very good, likely has a total use of one year production. *Please note* - the pre-made pouch (doypack) filler and sealer has previously been used / fed by a linear weigher and a multi-head weigher depending on what the products being packed were.

Condition: new, functionality: fully functional, Year of construction: 2026, Available in stock Capacity – 500 l. Diesel engine. Self-Propelled. Diesel Burner. Engine fuel tank – 50 l. Chjdjd Swd Uspfx Ai Nsa Oil tank – 30 l. Thermal oil heater – 80 l. Electrically heated hose – 6 m. Heating the mastic through the thermal oil (thermal oil jacket).

Condition: used, functionality: fully functional, type of input current: three-phase, input voltage: 380 V, INDUSTRIAL ELECTRIC HEAT TREATMENT FURNACE - EMISON Electric heat treatment chamber furnace manufactured by EMISON (Forns Elèctrics Emison SA, Badalona, Spain), a Spanish specialist in industrial furnaces. From an industrial company liquidation (insolvency proceedings). ═════ SPECIFICATIONS ═════ - Manufacturer: EMISON (Forns Elèctrics Emison) - Country of origin: Spain (Badalona) - Type: Electric heat treatment chamber furnace - Power supply: 380V three-phase - Heating: electric resistance elements - Temperature control: analog - Large heating chamber - Robust metal frame construction - Model: [TO BE CONFIRMED FROM NAMEPLATE] - Max temperature: [TO BE CONFIRMED] - Total power: [TO BE CONFIRMED] - Chamber dimensions: [TO BE CONFIRMED] ═════ CONDITION ═════ - Used, from an industrial closure (not due to malfunction) - Frame in good condition - Sold as-is, a full inspection is welcome before pickup - Original manual NOT included - No warranty implied ═════ ABOUT THE MANUFACTURER ═════ EMISON (Forns Elèctrics Emison SA) is a Spanish industrial furnace manufacturer based in Badalona, Barcelona, and is still active today. The manufacturer provides technical support and spare parts directly for existing units. This makes EMISON furnaces a safer choice than those from defunct brands. ═════ APPLICATIONS Chedpjzbg Rqjfx Ai Noa ═════ Suitable for: - Heat treatment of metal parts (annealing, tempering, hardening preheat) - Industrial drying processes - Ceramic firing (low-medium temperature) - Curing of coatings and paints - Laboratory and R&D thermal processes - General industrial heating ═════ LOGISTICS & PURCHASE ═════ - Pickup location: Madrid, Spain (or Barcelona) - Weight: [TO BE CONFIRMED - approx. 600-1,000 kg] - Loading: forklift required - Inspection welcome by appointment - Payment: bank transfer - Documents: invoice provided - International shipping possible — buyer arranges transport Keywords: EMISON furnace, heat treatment furnace, electric industrial oven, chamber furnace, Spanish furnace, annealing oven, drying oven, tempering furnace, industrial heating equipment. For technical questions, additional photos, or to schedule an inspection, please send a message.

Condition: used, Year of construction: 2004, machine/vehicle number: PST31, Used FISCHER Complete Skid-Mounted Pasteurization & Cooling LineTechnical Specifications & Performance DataThis skid-mounted plate heat exchanger pasteurizer is engineered for high-throughput thermal processing with integrated cooling and CIP functionality. Manufactured by FISCHER engineering and built on a stainless steel skid, it offers rapid deployment and reliable performance for beverage production and industrial packaging environments.Type: Plate heat exchanger pasteurizer (EUROCAL series)Model: EUROCAL 18CFGThroughput: 6,000 L/hSections: 4-section plate pack for heating, regeneration, and coolingDesign pressure (PS): 6 barManufacturing year: 2004Construction: High-grade stainless steel skid and process contact partsChiller module: Air-cooled heat-pump type (Cooling 30.0 kW; Heating 32.0 kW; Refrigerant R407C)Advanced Automation & Control SystemsThe pasteurizer features centralized automation for precise thermal profiles and repeatable product quality across shifts.Control panel: Central stainless steel electrical cabinet with PLC and touchscreen HMIInstrumentation: Pressure gauges, flow control, and temperature sensors for closed-loop regulationProcess analytics: Inline quality monitoring to supervise key product parameters in real timeCIP automation: Pneumatic valve islands and control heads orchestrating automated cleaning cyclesProduction Line Integration CapabilitiesDesigned to integrate seamlessly upstream of filling, this second hand thermal processing unit connects easily to existing utilities and can be paired with a used bottling line or new production line layouts.Inline/standalone: Operates as a standalone pasteurization and cooling skid or inline within a complete packaging machinery lineFormat flexibility: Suitable for multiple liquid products prior to filling in PET, glass, or other containersQuick connection: Skid piping and utility stubs facilitate fast commissioning and changeoversMachine Condition & Maintenance HistoryProfessionally maintained and presented in ready-for-operation condition, this equipment supports immediate relocation and rapid start-up for beverage production or food processing facilities.Status: Ready for immediate operationUpkeep: Well-maintained, industrial-grade components designed for continuous dutyOperational Performance & VersatilityIdeal for high-quality thermal treatment with efficient energy recovery, ensuring consistent pasteurization while protecting sensory attributes.Applications: Milk pasteurization, fruit juice processing, syrup handling, and brewery wort coolingEnergy efficiency: Regeneration section increases thermal efficiency and reduces utility loadQuality assurance: I... Cjdpfxey Ai Hls Ai Njha

Condition: used, mileage: 683,000 km, power: 290 kW (394.29 HP), first registration: 07/2015, fuel type: diesel, overall weight: 25,000 kg, axle configuration: 3 axles, next inspection (TÜV): 07/2024, color: silver, gearing type: automatic, emission class: euro6, total width: 2,600 mm, total height: 3,600 mm, loading space volume: 84 m³, loading space length: 7,700 mm, loading space width: 2,480 mm, loading space height: 2,200 mm, Year of construction: 2015, Equipment: ABS, air conditioning, electronic stability program (ESP), parking heater, soot filter, tail-lift, * Frigoblock EK 25 U cooling unit * Driving with generator + 380 volt stationary operation * 2,000 kg Bär tail lift * Medium-length driver's cab * Automatic transmission * Constant throttle * Euro 6 * Adaptive cruise control * Lane departure warning * Sat nav * Differential lock * Fully air-suspended * Rear view camera * Spoiler * Automatic climate control * Seat heating * Aluminum floor * Interior loading space 7,700 x 2,480 x 2,200 mm * Tires front + rear 385/55 R 22.5, mid. 315/70 R 22.5 Only available as a combination with a suitable trailer: * Front flap for loading into the truck * Drawbar pneumatically extendable * Frigoblock cooling unit EK 25 U * Driving operation with generator + 380 volt stationary operation * 2,000 kg Bär tail lift * Wüllhorst make * Internal loading space 7,800 x 2,480 x 2,200 mm * 18,000 kg . EZ 09/2015 * SAF axles * Disc brakes * Air suspension The price includes the truck and trailer as a complete combination. Several trains available, from 2015 - 2017 ---- Special equipment: Front axle load 8.0 t, driver's side airbag, audio system: CD radio (Bluetooth), exhaust pointing downwards to the right, 220 Ah battery, standard and DuoMatic brake connection, compressed air connection in the driver's cab, aluminum compressed air tank, high compressed air unit, driver assistance system: lane departure warning, tinted windscreen with band filter, vehicle without trailer coupling, 150 A generator, 12.7 cm info display with additional display, communication interface, 2-cylinder air compressor, front engine output with Frigoblock preparation, reinforced engine brake, parameterizable special module, acoustic reversing alarm (external warning signal), tail lift switch, automatic circuit breaker, seats in the driver's cab: driver's seat, comfort suspension seat, sun blind for side window, driver's door, voltage converter 24V / 12V 10 A, steel rims 11.75x22.5 (on trailing axle), steel rims 11.75x22.5 (on front axle), additional 24V socket in passenger footwell, preparation for 2nd control unit for level control, preparation for CB radio, preparation for cool box / refrigerator, additional thermal insulation, additional heating (water) Codpjtpr Aisfx Ai Noha Other equipment: Emissions standard EURO 6, axle configuration: 6x2, trailer brake 2 - line, connections on the left, trailer socket 24V / 15-pin, Antos, outside mirror electric. adjustable and heated, differential lock rear axle, driver's cab: width 2.30 m, driver's cab: hydraulic tilting device, driver's cab: M ClassicSpace, driver's cab: steel-sprung, standard, driver's cab floor with engine tunnel 320 mm, suspension: air / air (full air), electric windows, 12-speed gearbox - type: G 211-12, urea tank (AdBlue): 60 litres, manual lifting roof (steel), rear axle crown gear 440, body/structure: chassis, comfort locking system, fuel tank: 290 litres aluminum, unregulated power steering pump, lifting device trailing axle, air intake from the front, engine 10.7 litres - 290 kW R6 diesel (OM 470), engine compartment encapsulation, trailing axle with single tires, ramp mirror, spare wheel, residual heat utilization, disc brakes front and rear axle, Seat cover / upholstery: fabric, seats in the driver's cab: passenger function seat, splash guard at the front, stabilizer at the front axle, additional stabilizer, rear axle / trailing axle, 24V socket in the driver's cab, tachograph / EC control device, aerodynamically shaped underbody paneling, underrun protection at the front, preparation f

Condition: used, mileage: 68,017 km, power: 125 kW (169.95 HP), first registration: 07/2024, fuel type: diesel, empty load weight: 2,428 kg, maximum load weight: 1,072 kg, overall weight: 3,500 kg, axle configuration: 2 axles, wheelbase: 3,665 mm, next inspection (TÜV): 08/2026, fuel: diesel, color: white, gearing type: automatic, suspension: other, number of seats: 3, total length: 5,932 mm, loading space length: 3,272 mm, loading space width: 1,780 mm, loading space height: 1,940 mm, Equipment: ABS, air conditioning, airbag, central locking, cruise control, electronic stability program (ESP), fog lights, had accident, onboard computer, sliding door, soot filter, traction control, Disc brakes, double passenger seat, rear step, interior trim, wooden cargo floor, L2 wheelbase, right-hand side mirror electrically adjustable, H2 height, air suspension seat, high roof, touchscreen, bulkhead, accident damage, thermal protection glass, clock & tachometer, brake pad indicator, active headrest, 3-door, first owner, Euro6e, green environmental badge (4), steel rims, puncture repair kit, reversing camera, black, passenger airbag, sliding door on the right, navigation with color monitor, color monitor for navigation system, shift paddles, parking assist camera, parking assist sensors rear, parking assist sensors front, traction control, electric windows 2-way, seat heating, radio/MP3, outside temperature display, tinted glass, heated exterior mirrors, power steering, wood trim, electric exterior mirrors, brake assist, comfort seats, rear-wheel drive, 3rd brake light, center armrest, German version, additional equipment available, errors and prior sale excepted, trade-ins possible, financing possible, please contact us, we will create a customized offer for you. Nationwide delivery possible. A50 front axle with increased load capacity, AR2 axle ratio i = 3.923, BA3 active brake assist, BH1 HOLD function, C6L multifunction steering wheel, CL1 steering wheel adjustable in inclination and height, CT1 vibration damper, CW2 omission of vehicle lowering, D03 high roof, D50 continuous bulkhead, E07 hill start assist, E1B storage compartment for smartphones including wireless charging, E1D digital radio (DAB), E1E navigation, E1U USB socket 5 V, E46 socket in the driver's cab, E57 electrical system for trailer socket, E7M MBUX multimedia system, ES0 jump start – contact, ES5 charging package, instrument panel, EW6 pre-installation for Remote Services Plus, EY2 Live Traffic Information, EY5 Mercedes-Benz emergency call system, EY6 breakdown management, F2W winter package, F64 electrically folding exterior mirrors, F68 heated and electrically adjustable exterior mirrors, FF4 storage compartment above headlining, FF5 storage compartment above windshield, FJ1 folding cover for storage compartment, FJ4 storage compartment. Chsdpfx Aiozdk Tgs Nja

Condition: used, mileage: 96,632 km, power: 125 kW (169.95 HP), first registration: 01/2025, fuel type: diesel, empty load weight: 2,558 kg, maximum load weight: 942 kg, overall weight: 3,500 kg, axle configuration: 2 axles, wheelbase: 4,325 mm, fuel: diesel, color: white, gearing type: mechanical, suspension: other, number of seats: 3, total length: 6,967 mm, loading space length: 4,307 mm, loading space width: 1,780 mm, loading space height: 1,940 mm, Equipment: ABS, air conditioning, airbag, central locking, cruise control, electronic stability program (ESP), had accident, onboard computer, sliding door, soot filter, traction control, Disc brakes, double passenger seat, rear step, interior trim, wooden cargo floor, extra-long, right-hand mirror electrically adjustable, high roof, touchscreen, partition, accident damage, thermal protection glass, clock & tachometer, brake pad indicator, 3-door, 1st owner, Euro6e, green environmental badge (4), steel rims, rearview camera, black, 6-speed transmission, sliding door on the right, navigation with color monitor, color monitor for navigation system, parking assist, parking assist camera, parking assist sensors rear, parking assist sensors front, electric windows 2-way, heated seats, radio/MP3, MP3 interface, outside temperature display, tinted glass, heated exterior mirrors, power steering, wooden interior trim, exterior mirrors electric, brake assistant, rear-wheel drive, 3rd brake light, center armrest, country version Germany, other equipment available, errors and prior sale excepted, trade-in possible, financing possible, please contact us, we will create a customized offer for you. Nationwide delivery possible. 502 Updates intelligent speed assistant A50 Front axle with increased load capacity AR2 Axle ratio i = 3.923 BA3 Active brake assistant C6L Multifunction steering wheel CL1 Steering wheel adjustable in inclination and height CT1 Vibration damper CW2 Deletion of vehicle lowering D03 High roof D50 Partition wall, full height E07 Hill start assist E1D Digital radio (DAB) E1E Navigation E1U USB socket 5 V E46 Socket in the cab E57 Electrical system for trailer socket E7M MBUX multimedia system ED8 Pre-installation electrical system, parameterizable special module ES0 Jump start – contact ES5 Charging package dashboard EW6 Pre-installation Remote Services Plus EY2 Live Traffic Information EY5 Mercedes-Benz emergency call system EY6 Breakdown management F1K Clothes hook in the cab F2W Winter package F64 Exterior mirrors electrically foldable F68 Exterior mirrors heated and electrically adjustable F907 SERIES 907 TRANSPORTER VS30 FF5 Storage compartment above windshield FJ1 Folding cover for storage compartment FJ4 Storage compartment under Chodpfx Ajzg Iwbei Nja

Condition: refurbished (used), Year of construction: 2013, functionality: fully functional, PAGO System L600 Pharmaceutical Labeling Machine | Extensively modernized | GMP | Immediately available Manufacturer: PAGO Etikettiersysteme GmbH (Fuji Seal) Model: System L600 Year of manufacture: 2013 For sale is a high-quality PAGO System L600 labeling machine for the pharmaceutical industry. The machine is suitable for labeling vials, injection bottles, and other cylindrical containers in a GMP environment. The machine was already upgraded and modernized at the factory in 2018 to handle additional product formats. Cedpfxszpzbfj Ai Neha In 2022, we purchased the machine used and immediately took it to the manufacturer, Fuji Seal / PAGO Germany. There, it was completely inspected, serviced, and extensively modernized. Investments of €60,200 were made in these measures. Before delivery, a complete Factory Acceptance Test (FAT) was carried out at the Fuji Seal factory. The machine is in very good technical condition and is ready for immediate use. Equipment Laetus/Keyence vision system for print and code inspection New Allen / Novexx thermal transfer printer Siemens PLC control Touchscreen operation Unwinding station Outfeed station Servo drives Stainless steel GMP design Complete protective enclosure Original documentation Technical data Output up to 120 products/min For vials and injection bottles GMP-compliant design Year of manufacture 2013 Manufacturer: PAGO Etikettiersysteme GmbH Why is the machine being sold? For our new pharmaceutical CMO plant, we have purchased two new labeling machines. Due to space limitations, this machine is no longer needed. Advantages Extensive modernization by Fuji Seal / PAGO Documented investment of €60,200 Factory upgrade already in 2018 Complete FAT at the manufacturer Very well-maintained condition Immediately available Significantly cheaper than a new machine A comparable PAGO/Fuji Seal pharmaceutical labeling machine costs over €450,000 in 2026, depending on the equipment and automation. Inspection is possible at any time by appointment. We will gladly send you further photos, videos, and technical documentation upon request.

Condition: new, Year of construction: 2026, CORMAK WK50 Pillar Drill Press – Heavy-Duty Industrial Metal Drilling and Tapping Machine The CORMAK WK50 is a high-performance industrial pillar drill press with tapping function, designed for intensive drilling, reaming, countersinking, hole enlargement, and tapping operations in metal. Thanks to its rigid rectangular body construction, high feed force, and wide range of spindle speeds and torque values, the WK50 industrial drilling machine is suitable for both single-piece production and serial manufacturing, ensuring repeatability, accuracy, and high machining efficiency. Main Advantages of the Machine Large drilling capacity – up to 50 mm in steel and up to 55 mm in cast iron, enabling machining of large-diameter holes. Drilling machine with tapping function – reverse spindle rotation and high spindle torque allow efficient and precise thread cutting. Precise spindle guidance – 250 mm spindle travel and 9 feed settings (from 0.056 to 1.80 mm/rev) allow optimal adjustment of machining parameters. High spindle torque – 35 kgm – enables effective drilling and tapping even in high-strength materials. Rigid rectangular column design – provides excellent stability of the drive system and resistance to dynamic deformation. Cooling system – coolant pump with a capacity of 12 l/min ensures proper thermal conditions in the cutting zone. Intuitive operation and easy maintenance – the machine has been designed for ergonomic use and reliable long-term operation. Design and Technology – High Rigidity for Industrial Applications The CORMAK WK50 pillar drill press is based on a highly rigid construction with a vertically adjustable spindle head featuring 200 mm manual travel. The solid machine body and precision guide system ensure accurate positioning of tools and workpieces. The 12-speed spindle gearbox (31.5–1400 rpm) provides a wide operating range, allowing optimal cutting parameters to be selected for different materials and machining operations. The large 710 × 490 mm worktable makes it easier to mount large and irregularly shaped workpieces, increasing the machine’s versatility in industrial environments. Precision and Working Efficiency High spindle torque and precise feed adjustment ensure excellent repeatability during serial production tasks. The CORMAK WK50 drill press with automatic feed enables semi-automatic drilling and tapping operations, reducing errors caused by manual operation. The integrated cooling system and work lighting improve operator comfort and safety, especially during precision machining and long production cycles. Standard Equipment Cooling system with 12 l/min pump Work light Chodpfx Ajrigc Nei Nea 710 × 490 mm worktable Drill chuck 1–13 mm Morse reduction sleeves – 2 pcs. (for MK5) Technical Specifications Parameter Value Maximum drilling diameter 50 mm (55 mm in cast iron HB=220) Spindle taper MK5 Spindle travel 250 mm Spindle head manual travel 200 mm Maximum feed force 1600 kg Maximum spindle torque 35 kgm Spindle-to-column distance 335 mm Number of spindle speeds 12 Spindle speed range 31.5–1400 rpm Spindle feeds 0.056–1.80 mm/rev (9 settings) Worktable dimensions 710 × 490 mm Spindle-to-table distance 550 mm Main motor power 3 kW Coolant pump capacity 12 l/min Overall dimensions 1300 × 1200 × 2530 mm Weight 1350 kg

Condition: new, Year of construction: 2026, CORMAK WS20B Bench Drill Press – Precision Metal Drilling Machine with Automatic Spindle Feed The CORMAK WS20B bench drill press is an advanced column drilling machine for metalworking, equipped with automatic spindle feed, enabling precise drilling and tapping in structural steel and other metals. Thanks to its robust construction, high power and accurate feed control, the WS20B provides high efficiency and reliability in both industrial and workshop applications. Main advantages of the machine Automatic spindle feed – precise feed adjustment up to 80 mm/min allows smooth and controlled drilling operations. Thread tapping function with automatic rotation direction switching – ensures safe and effective operation with taps up to M16. High rigidity construction – an 85 mm diameter column and seasoned castings reduce vibrations and improve drilling accuracy. 135 mm spindle stroke – allows deep drilling without the need to reposition the workpiece. Belt drive system – 5 speed levels ranging from 280–1875 rpm allow optimal adjustment of parameters to the processed material. CE safety systems – spindle and belt transmission guards with limit switches increase operator safety. Construction and technology Codpfxorif T Do Ai Noha The CORMAK WS20B bench drill press with automatic feed has been designed for long-term and reliable operation. The spindle and transmission components are made of hardened and thermally treated steel. The column, base and worktable are manufactured from precisely machined, seasoned cast iron components. The MK2 Morse taper enables quick tool replacement and compatibility with a wide range of accessories. Precision and work efficiency The combination of automatic spindle feed and a powerful 1.1 kW motor enables smooth and repeatable drilling, even in difficult-to-machine materials. The rigid construction and the ability to rotate the worktable 360° improve operator comfort and provide greater flexibility when positioning workpieces. Applications The CORMAK WS20B drill press with automatic feed is used in: industrial plants, mechanical workshops, maintenance departments, technical schools and training centres. It is designed for drilling, reaming and tapping operations in metals, aluminium and engineering plastics. Standard equipment Drill chuck with key Morse taper drift key U-type spindle guard with safety limit switch Belt drive guard with safety limit switch Technical specifications Parameter Value Maximum drilling diameter (steel) 20 mm Maximum tapping diameter (steel) M16 Spindle stroke 135 mm Spindle taper MK2 Spindle speed range 280–1875 rpm Number of speeds 5 Feed speed range 0–80 mm/min Column diameter 85 mm Column wall thickness 12.7 mm Spindle-to-column distance 260 mm Spindle-to-table distance 366 mm Spindle-to-base distance 678 mm Table dimensions 300 × 320 mm Base dimensions 376 × 566 mm Motor power 1.1 kW Power supply 400 V Net weight 179 kg Machine dimensions 800 × 450 × 1250 mm

Condition: used, Year of construction: 1988, operating hours: 30,000 h, functionality: fully functional, machine/vehicle number: 20992, Dear Mr. / Mrs., we have opportunity to offer you IPSEN VTTC-324 from 1988. Characteristic of vacuum furnace: Sn = 165 kVA Un = 400 V, 50Hz In = 240 A Cjdpfxowah R Rs Ai Noha Useful dimension: 450mm x 600mm x 900mm Power of heaters = 120 kW Voltage of heaters = 43V, 50Hz Current of heaters = 1613 A Temperature range = 350 - 1320 C Absolute vacuum = 1 x 10e-5 (diffusion pump) Absolute pressure = 5 bar Also, with furnace is coming lot of spare parts and equipment for thermal heating process (tank for gas, heaters, lot of controllers, chargers and everything). For all information that you need, please contact me.

Year of construction: 2026, condition: new, machine/vehicle number: AT111, New UHT tubular strilizer system for milk & cream - 10.000 LhTechnical Specifications & Performance DataThis tubular indirect UHT sterilizer is engineered for dairy processing with variable-speed operation and high thermal efficiency. It delivers dependable ultra-high-temperature treatment for milk and 40% fat cream with robust heat recovery and precise temperature control across each process stage.Capacity: Milk 10,000 L/h; Cream 40% fat 5,000 L/hHeat exchanger: Tubular, corrugated AISI 316 stainless steel tubesProduct inlet temperature: 8°CHomogenizing temperature: about 65–75°C (intermediate outlet available)Holding temperature: 90–95°CSterilization temperature: 135–142°C for 4 sOutlet temperature: about 20–25°CHeat regeneration: about 70% on tubular exchangerThermal profile: Heating 5→115°C (pressurized hot water at 132°C), Sterilization 115→142°C (industrial steam ~6 bar), Cooling 142→27°C (water at 17°C), Final cooling 27→25°C (water at 17°C)Balance tank: 200 L, vertical cylindrical, AISI 304 stainless steel, with 3 level probes and CIP spray ballProduct pump: Stainless steel centrifugal, special high-temperature mechanical seal, operating pressure 5–10 barElectromagnetic flow meter: Flanged, 4–20 mA outputHot water circulation group: High-efficiency pump, 14–16 bar, 10,000 L/h; stainless steel expansion vessel; safety valve; automatic refill; steam–water tubular heat exchangerTemperature regulation: Pneumatic modulating steam valve; high-efficiency steam trapOn-board CIP: Conductivity measurement, 2 chemical dosing pumps, 2 x 150 L AISI 304 tanks (acid and caustic)Construction: Pre-assembled on AISI 304 stainless steel skid with adjustable leveling feetAdvanced Automation & Control SystemsThe system is equipped with a modern automation platform to ensure stable UHT processing, traceability, and consistent product quality.Control architecture: Integrated PLC with a 12-inch HMI touch screenCabinet layout: Two AISI 304 stainless steel enclosures (electronics and pneumatics separated)Electronics cabinet: PLC, HMI, power and automation componentsPneumatics cabinet: Solenoid valves and air distributionAutomated functions: CIP cycle management, pasteurization/sterilization control, temperature regulation, alarm handling, safety interlocksProcess data logging: Continuous monitoring of temperatures, product pressure, holding time, and flow rateInstrumentation: Electromagnetic flow meter with 4–20 mA output for robust feedback controlProduction Line Integration CapabilitiesDesigned for seamless integration into dairy processing, beverage production, and industrial packaging environments, this U... Csdpfx Aszmpznji Nsha

Condition: used, mileage: 178,059 km, power: 81 kW (110.13 HP), first registration: 12/2010, fuel type: diesel, overall weight: 2,350 kg, next inspection (TÜV): 01/2027, color: grey, gearing type: mechanical, emission class: euro5, number of seats: 2, Year of construction: 2010, Equipment: ABS, air conditioning, all wheel drive, central locking, electronic stability program (ESP), parking heater, Equipment: * Body/Structure: Panel van * 4x4 drive * Air conditioning * Auxiliary heater * Thermal insulation glazing * Height-adjustable front seats * Partition wall with window in the cargo area * Rear tailgate with glazing * Sortimo workshop fittings on left and right Technical features: * Audio system RCD 210 MP3 * Rear parking sensors * Multi-function display Plus * Electrically adjustable and heated exterior mirrors * Heated seats Safety/Environment: * 4x4 drive * Driver and passenger airbags * Front side airbags * Traction control system (ASR) * Brake assist * Electronic differential lock (EDS) Chjdpfx Aisy Haadj Nea * Driver assistance system: Hill Start Assist * Low emissions Euro 5 Miscellaneous: * First delivery in Germany * 1 previous owner * Engine: 2.0 L - 81 kW TDI * Wheelbase: 3,006 mm * Well-maintained condition * COC paper available * Retrofitting of a tow bar is possible for an additional charge Since 1972, your reliable partner for cars and commercial vehicles in 28832 Achim at the Bremer Kreuz. NutzfahrzeugZentrum Behnke continuously offers around 200 vehicles from the areas of vans, commercial vehicles, and construction machinery! We continually offer attractive financing options at special rates. If interested, we will gladly provide you with an individual offer! We welcome trade-ins of your commercial vehicle/construction machinery. If you require a new TÜV inspection, we will happily provide you with an offer from one of our partner workshops. Our offer generally does NOT include a new TÜV inspection. Delivery of your "new" commercial vehicle is possible via our external partners for an additional charge. The information provided in advertisements, on the Internet, price tags, and images are non-binding descriptions and do not represent guaranteed specifications. The seller accepts no liability/warranty for typing or data transmission errors. Listed equipment features may need to be checked separately. Subject to errors and prior sale.

Condition: excellent (used), Year of construction: 2012, Krauss Maffei Injection Moulding Machine KM 1300-12000 MX Control system: MC5 Year of manufacture: 2012 Clamping unit: Clamping force [kN]: 13,000 Cjdpfx Aiey Hqwye Nsha Platen dimensions (hxw) [mm]: 2210 x 1910 Clearance between tie bars (hxw) [mm]: 1570 x 1270 Min./max. mould height [mm]: 700–1400 Maximum opening stroke [mm]: 3050 Maximum ejector stroke [mm]: 350 Injection unit: Screw diameter [mm]: 105 Injection volume [cm³]: 5195 Shot weight in PS [g]: 4728 Injection pressure [bar]: 2296 Maximum injection speed [g/s PS]: 186 Electrical & hydraulic equipment: Rated pump motor power [kW]: 132 Rated screw motor power [kW]: 145 Heater power [kW]: 71 Dimensions and weight: Net weight with control cabinet [t]: 70 Dimensions (L x W x H) [m]: 13.03 x 3.65 x 2.82 Additional equipment: Parallel movements: Independent hydraulic screw drive Hot runners: 12 integrated temperature control zones Core pull: 3 hydraulic circuits (2 on moving platen, 1 on fixed platen) Pneumatics: 2 air blow-off valves + 1 valve for hot runner needle control Hydraulic accumulator Cooling: 20 rotameter system (10 for fixed platen + 10 for moving platen) Interfaces: Euromap 67 and Euromap 18 Insulation: BluePower – barrel thermal insulation

Condition: reconditioned (used), Year of construction: 2011, machine/vehicle number: 136160/0601H, power: 226 kW (307.27 HP), rotational speed (min.): 1,775 rpm, input voltage: 400 V, overall weight: 1,285 kg, total length: 1,200 mm, total width: 800 mm, total height: 1,000 mm, VEM Electric Motor incl. ABB Control Cabinet with Converter A powerful electric motor suitable for a wide range of industrial applications. With a rated power of 226 kW, it delivers reliable and efficient performance. Its robust design and high-quality materials make this motor durable and low-maintenance. It features a high protection rating, making it suitable even for demanding environments. Technical specifications: Rated power: 226 kW Design: K21F Protection class: IP55 Insulation class: F Voltage: 400 V Frequency: 60 Hz Number of poles: 4 Cooling type: TWS (Thermal Winding Protection) Weight: 1,285 kg For further details, see images. Chjdjtr Ekcspfx Ai Noa Condition: Used Scope of delivery: 1 electric motor incl. control cabinet

Condition: used, Year of construction: 2011, machine/vehicle number: 136160/0002H, power: 226 kW (307.27 HP), rotational speed (min.): 1,775 rpm, input voltage: 400 V, overall weight: 1,285 kg, total length: 1,200 mm, total width: 800 mm, total height: 1,000 mm, VEM Electric Motor incl. ABB control cabinet with converter A powerful electric motor suitable for a wide range of industrial applications. With a rated power of 226 kW, it delivers reliable and efficient performance. Thanks to its robust construction and high-quality materials, this motor is durable and low-maintenance. Featuring a high degree of protection, it is also suitable for demanding environments. Technical Specifications: Cedpfx Aijtr Embe Njha Rated power: 226 kW Design: K21F Degree of protection: IP55 Insulation class: F Voltage: 400 V Frequency: 60 Hz Number of poles: 4 Cooling type: TWS (Thermal winding protection) Weight: 1,285 kg For further details, see pictures. Condition: Used Scope of supply: 1 electric motor incl. control cabinet

Condition: new, functionality: fully functional, Year of construction: 2026, ! Short delivery time, under 10 weeks! Model designation: Impuls Packaging Box-Motion BF Production orientation: Horizontal Conveying system: Chain conveyor belt or infeed belt Film feed: From below Forming shoulder: Flexible and fixed Operator display: 10" touchscreen with memory functions, pivotable via outrigger arm for comfortable operator handling Drives & control: 9 servo motors and PLC control Package length: 120-600 mm Package width: Max. 350 mm (depending on film width) Package height: Max. 150 mm (depending on forming shoulder) Speed: 10-60 bags/min. Film width: Up to 900 mm, depending on model Machine weight: Approx. 900-1500 kg Machine material: 304 stainless steel Registration mark sensor: Yes External compressed air required: Yes Printer mount: Available at extra cost Delivery time: Current delivery time under 10 weeks Features: • Box-motion end sealing • Manual reel fixation without compressed air • Automatic reel centering for precise application • Automatic stop with empty products (no product – no bag) • Easy touch screen operation via color icons • Continuous product feed through sensor-based control • Registration mark sensor included • Safety protection covers • 3-sided seam packaging (fin seal) + longitudinal seal • Can be combined with upstream and downstream machines • Customer-specific modifications/designs on request Cjdjq Ikgyepfx Ai Neha Additional options (on request and at extra cost): • Thermal transfer printer, e. g. for best-before dates, print width up to 60 mm • Euro hole punch, etc. • Gas flushing units for modified atmosphere packaging (extends product shelf life) • Automatic product infeed systems, intermittent push-in systems • Length-dependent product processing via photoelectric sensors

Condition: used, mileage: 45,541 km, power: 130 kW (176.75 HP), axle configuration: 4x4, color: green, driver cabin: day cab, gearing type: mechanical, emission class: euro4, total length: 62,200 mm, total width: 25,000 mm, total height: 34,100 mm, Year of construction: 2008, Equipment: ABS, EBS, air conditioning, For vehicle-related inquiries, please contact Mr. Seidel (available by phone at...). Codjzpgyaepfx Ai Neha Mercedes-Benz Atego 1018 A 4x4 with platform body and tarpaulin !!! Available in multiple units !!!, A70 Front axle differential lock, A71 Rear axle differential lock, AF8 Axle ratio i = 4.875 (H4/H5), AH7 Rear axle H4, 7.7 t, crown wheel 368, AK6 Front axle 6.1 t, B02 Anti-lock braking system (ABS), B43 Trailer brake, 2-line system, B65 Compressed air dryer, heated, BB6 Drum brakes on front and rear axles, BB9 Burst protection for brake system, C42 Stabilizer bar, rear axle, mounted under frame, C57 Protection device, lateral, C95 Omission of rear underrun protection (EC), CC9 Omission of protection device, lateral, CL9 Steering LS 6/LS 8, CR4 Mounting parts on the frame/hole pattern, D15 Roof hatch, pivoting, D17 Turntable, E10 Camouflage light circuit, E21 Battery(ies), reinforced, EC6 Trailer socket, 15-pin, EM8 PSM, superstructure and trailer CAN, ISO 11992, ES8 Additional socket 24 V/15 A, cab railing, F07 Cab, double cab, steel, F20 S-cab, extended by 180 mm, F30 Cab tilting hydraulics, FE5 Electric windows, driver and passenger door, FN1 Distribution cockpit, FQ7 Storage compartment above windshield, 2 compartments, FS9 Exterior mirrors, electric, driver's side, FW2 Omission of immobilizer (transponder), FX7 Front mirror, aerodynamic, front, GC5 Gearbox G 60-6/9.2-1.0, GS1 Manual gearbox, GV5 Transfer gearbox VG550 3W, H03 Air conditioning, H04 Additional thermal insulation, HF2 Pollen filter, I96 Tires 14.5 R 20, front axle, IA1 Wheel formula 4x4, ID1 Leaf spring suspension, IP6 Wheelbase 3260 mm, IU5 10.5-tonner, IX4 Inline engine, 4 cylinders, IY2 Hydraulic fluid, Pentosin CHF 11 S, JD3 Tachograph, digital, EC, speed sensor + additional recorder, ADR, JK3 Combination instrument, graphic display, fuel economy indicator, JZ3 Tachograph manufacturer Actia, K40 Fuel tank lock, K45 Filter, fuel tank filler neck, K81 Fuel pre-filter, heated water separator, KAK6 Front axle 6.1 t, KB56 Front coupling head for air replenishment, KBCA Air reservoir and air dryer mounted offset in the frame, KC57 Lateral protection device / component adaptation, KCAH Bumper, steel design, KCL9 Steering LS 6/LS 8, KCR5 Frame head reinforced for special superstructures, KCUL Underrun protection, foldable, KCUN Overhang adjustment 1135 mm, KCYF Flagpole, KCYQ Towing eyes, front and rear, screwable at the front (not according to STANAG), KCYS Bumper painting, KD15 Round roof hatch, pivoting, KD17 Turntable frame (without turntable), KD6 Exhaust gas monitoring for nitrogen oxides (NOx), KP1 AdBlue tank, 25 l, KP9 AdBlue container, plastic, KQBA Automatic hitch; Size: K2 D/UN763 (for drawbar eyes acc. to VG740), KQD8 Front spring 6.1t, parabolic, KQV1 Trailer coupling, manufacturer Orlandi, KSMA Middle seat with safety belt, foldable, KTBA Weight variant 10.5 t (6.1/6.2), KYEA Bracket for warning flag, KYGG Window camouflage, M31 Air compressor, increased performance, M89 Intake air preheating for cold start, MB1 Engine brake, with constant throttle, MD4 Speed limiter 90 km/h, EC, MD9 Cruise control, MN6 Engine, R4, LA, 130 kW (177 hp), 2200/min, MS4 BlueTec 4 (Euro IV), N80 Gearbox lock for auxiliary drive, NL8 Auxiliary drive MB 60 1c, MPA, NZ1 Auxiliary PTO, single, QH4 Rear spring, 6.2 t, parabolic, QN5 Front spring 4.4 t, parabolic, QS3 Crossmember, retrofitted installation of trailer hitch G135 ZAA, QV1 Trailer coupling, Orlandi, R04 Wheel nut cover, R60 Spare wheel

Condition: used, mileage: 16,745 km, power: 130 kW (176.75 HP), axle configuration: 4x4, color: green, driver cabin: day cab, gearing type: mechanical, emission class: euro4, total length: 61,500 mm, total width: 25,600 mm, total height: 29,300 mm, Year of construction: 2009, Equipment: ABS, air conditioning, For vehicle inquiries, please contact Mr. Seidel (at the following telephone number). Mercedes-Benz Atego 1018 A 4x4 Flatbed with Cover Cedpfx Aiszpgx No Neha !!! Available in multiple units !!!, A70 Front axle differential lock, A71 Rear axle differential lock, AF8 Axle ratio i = 4.875 (H4/H5), AH7 Rear axle H4, 7.7 t, ring gear 368, AK6 Front axle 6.1 t, B02 Anti-lock braking system (ABS), B43 Trailer brake 2-line, B56 Coupling head at the front, for air replenishment, B65 Compressed air dryer, heated, BB6 Drum brake on front and rear axles, BB9 Pipe rupture protection for braking system, C42 Stabilizer, rear axle, under frame, CC9 Deletion of protection device, lateral, CL9 Steering LS 6/LS 8, CR4 Mounting parts on the frame/hole grid, CU0 Underrun protection, foldable, rear (Meiller), D15 Roof hatch, swiveling, D17 Turntable, E10 Camouflage light circuit, E21 Battery(ies), reinforced, E30 Battery main switch, 1-pole, E31 Power socket, E40 Trailer socket, 7-pole, E41 Trailer socket, 12-pole, E55 Socket for trickle charging, 24 V, E70 Intercom system, with socket, NATO, EC6 Trailer socket, 15-pole, EM8 PSM, body and trailer CAN, ISO 11992, ES8 Auxiliary socket 24 V/15 A, cab bracket, F07 Cab double cab, steel, F20 S-cab, 180 mm extended, F30 Cab tilting hydraulics, FE5 Electric window lift, driver and passenger door, FN1 Distributor cockpit, FQ7 Storage compartment above windshield, 2 compartments, FS9 Exterior mirror, electric, driver's side, FV7 Pre-installation, installation kit, FW2 Deletion of immobilizer (transponder), FX7 Front mirror aerodynamic, front, GC5 Transmission G 60-6/9.2-1.0, GS1 Manual gearbox, GV5 Transfer gearbox VG550 3W, H03 Air conditioning, H04 Additional thermal insulation, HF2 Pollen filter, HH1 Hot water auxiliary heater, Eberspächer D5W S, I42 Tires 365/80 R 20 front axle, IA1 Wheel arrangement 4x4, IB4 Model series LKN, IC1 Flatbed chassis, ID1 Leaf spring suspension, IL1 Domestic (Germany), IL8 Left-hand drive version, IP6 Wheelbase 3260 mm, IU5 10.5-ton vehicle, IX4 In-line engine, 4 cylinders, IY2 Hydraulic fluid, Pentosin CHF 11 S, JD3 Tachograph, digital, EC, speed sensor + additional recording, ADR, JK3 Combination instrument, graphic display, fuel economy meter, JZ1 Tachograph manufacturer VDO, K40 Fuel tank lock, K45 Strainer, fuel tank filler neck, K81 Fuel pre-filter, heated water separator, KBCA Air reservoir and air dryer mounted offset in the frame, KCAH Steel bumper, KCR5 Frame head reinforced for special attachments, KCUN Overhang change 1135 mm, KCYQ Towing eyelets front and rear, screwable at the front (not according to STANAG), KD6 Exhaust gas monitoring for nitrogen oxide (NOx), KE8 On-board diagnosis 1.0 with NOx control, KFKV Cab tilting pump relocation, KFMP Cab installation package for BWFPS, KG0 Stainless steel silencer with SCR catalytic converter, KJ1 Main silencer right, lateral on the frame, KK45 Strainer for fuel tank filler neck, KKSN Main tank right 200L, steel, (540x620x620), KKVD AdBlue tank mounted offset to the left, KLSH Protective grille for taillights, KLSJ Protective grille for turn signal lights, KMJN Compact air filter standing behind the cab, KP1 AdBlue tank, 25 l, KP9 AdBlue container, plastic, KQ29 Trailer or towing hitch, manufacturer RINGFEDER, KQBA Automatic hitch; size: K2 D/UN763 (for towing lugs acc. to VG740, KTBB Weight variant 11 t (6.1/6.2), KZYC Painting of unpainted parts, L72 Electrical system, for third-party body, M89 Intake air preheating for cold start, MB1 Engine b

Condition: used, Year of construction: 2013, machine/vehicle number: CA47, Used capsuling equipment Nortan Prisma 4T 6000 bph This used capsuling equipment was rebuilt in 2013 as a new, and shrink-wrap capsule type. Cjdpjvguvzefx Ai Njha Safeguards are available for this Used rotary capsuling machine There are three different sets of bottle equipment available. The machine has been checked before dismantling. It is in good working condition and has been in operation until September 2021. It has automatic storage for the shrink capsules. A photocell connects the components to the main structure, which releases capsules for incoming bottles, completely automatically and synchronized. Despite its simplicity, maintenance is very important for this capsuling machine. The thermal heads and their gaskets, need to be checked carefully. The electrical panel is in order and complete with all cables and PLC, manuals, and wiring diagrams. The floor space required for this used capsuling machine square meters 4,50. Max. speed is 6,000 b\h. The Used rotary capsuling machine, has a whole set of stars, augers, and counter-stars to convey the bottle correctly. The direction of entry is from left to right and therefore clockwise. This machine is specific for glass containers. It can handle formats ranging from 0.50 L, to 0.75 L up to the size of 1 L. Nortan is one of the most common brands in circulation, it is therefore easy to find any spare parts for the machine.

Condition: ready for operation (used), Year of construction: 2008, operating hours: 116,131 h, functionality: fully functional, SIEMENS SGT-300 (TEMPEST) industrial Combined Heat and Power (CHP) / Poligeneration Plant, originally installed in 2008 and designed for continuous industrial operation. The plant is based on a Siemens SGT-300 single-shaft gas turbine with Dry Low Emission (DLE) combustion technology and a complete Waste Heat Recovery System (WHRS/HRSG) capable of simultaneously producing electrical power, process steam, thermal oil and chilled water. Gas Turbine • Manufacturer: Siemens • Model: SGT-300 (TEMPEST) • Year: 2008 • Type: Industrial Single Shaft Gas Turbine • Fuel: Natural Gas • Dry Low Emission (DLE) combustion • ISO Electrical Output: 7.9 MW • Site Output: approx. 7.6 MW • Generator Voltage: 6.3 kV • Frequency: 50 Hz • Generator Speed: 1,500 rpm • Electrical Efficiency: approx. 30.5% • Exhaust Gas Flow: 30.2 kg/s • Exhaust Gas Temperature: 545°C • Continuous duty (24/7 operation)Complete heat recovery package including: ✔ Thermal Oil Heater – DOWNTHERM A – 4.3 MW ✔ Thermal Oil Heater – SANTOTHERM 66 – 3.88 MW ✔ High Pressure Steam Generator (25–26 bar) ✔ Low Pressure Steam Generator (4.5 bar) Codpfx Aijzmga Io Nsha ✔ Hot Water Generator ✔ Single Effect Absorption Chiller Cooling capacity: 1.7 MW Production of: • Electricity • High pressure steam • Low pressure steam • Thermal oil • Hot water • Chilled waterOperating hours: 116,131 h, according to control panel Starts: 677, according to control panel Location: Spain Documentation: Available upon request Inspection: By appointment