Used Tapping Profile for sale (6,377)

Condition: used, Roll sets for profile bending machine, 3-roller ring bending machine HERKULES WETZLAR The rollers are suitable for a HERKULES WETZLAR profile bending machine, type BO 238 N. Hjdpfx Aajglaq Ijhsp Shaft diameter: 60 mm with an 18 mm keyway. 2 pieces, roller set No. 1, roller diameter 110 mm, roller width = 180 mm. 2 pieces, roller set No. 2, roller diameter 160 mm, roller width = 40 mm. 3 pieces, roller set No. 3, roller diameter 150 mm, for pipe diameter Ø 33 mm, roller width 87 / 115 mm. - Roller set No. 3 with adapter ring from Ø 93 to Ø 60 mm, without keyway. The machine had 2 driven rollers. Total weight of all rollers: 57 kg. Good condition.

Year of construction: 2024, operating hours: 1,452 h, condition: like new (used), functionality: fully functional, 1. PRODUCT RANGE (PROFILE TYPES) The line is equipped with tools and rollers for producing all standard wall and ceiling profiles: • Wall profiles: CW50, CW75, CW100 and UW50, UW75, UW100 • Ceiling profiles: CD60 and UD28 2. TECHNICAL SPECIFICATIONS AND PERFORMANCE Production unit (Rollforming Line): • Production speed: * Up to 60 meters/minute (without punching) o Up to 30 meters/minute (with the production of two holes in the profile) • Input material and thickness: Galvanized sheet DX51D+Z (thickness from 0.50 mm to 0.70 mm) • Coil width: Maximum 205 mm • Power consumption and connection: Total power 14 kW (actual consumption approx. 7 kWh), power cable 5x10 • Compressed air requirement: 8 Bar (consumption during operation only 2 l/min, unit capacity 100 l/min) • Layout of the production unit: 15 m (length) x 3 m (width) x 3 m (height) Automatic packing and palletizing unit (Profile Packing System): • Packing speed: 2.5 packs / minute • Length of finished profiles from 2000 mm to 6000 mm • Power consumption of the packing system: Total power 30 kW (actual consumption approx. 12 kWh), 3-phase connection 380 V • Compressed air for packing: 8 Bar (consumption 7 l/min) 3. DETAILED OVERVIEW OF LINE COMPONENTS 1. Uncoiler • Maximum coil width: 205 mm, outer coil diameter up to 1200 mm • Load capacity: up to 2500 kg Hedpfx Aezd Efqoahop • Non-motorized system with integrated safety wire mesh fence. 2. Rollforming Machine • Conventional type with roller change (14–15 forming stations) • Shaft diameter: 40 mm | Maximum width between stands: 197 mm • Roller shafts made of hardened and ground steel, supported at both ends. Upper shafts are adjustable according to sheet thickness with a precise Vernier scale. • Rollers made of high-quality alloy steel S 4140, precision machined and heat-treated to a hardness of 55–57 HRC for extremely long service life. 3. Flying Shear Cutting & Punching Unit • Flying shear, mounted on slides and guide rails for translational movement, driven by a servo motor and gearbox. • Knives/blades made of alloy steel for cold working, hardened to 60–62 HRC (exceptionally clean and precise cutting without deformation). • Protected by a safety fence. 4. Automatic Stacking, Strapping and Palletizing System (GHT-SIC-V3) • Automatic profile joining: Connecting system with straps transfers profiles to a group for stacking. Note: Smaller profiles (e.g., UD28), which are not suitable for machine stacking, are simply placed manually on the operator table. • Automatic strapping machine: High-speed brushless motors, speed up to 65 straps per minute, electronic control of tension force (1–35 kg) and control of strap welding temperature (widths 5, 6 or 9 mm). • Automatic electronic palletizer with forks (Mod. 50kg): Fully electronically controlled movement system along all axes via electro-braking drive with inverters (frequency converters), which ensures extremely smooth acceleration/deceleration and gentle handling of packages to prevent material damage. 5. Advanced CNC/PLC control system • Built-in components from recognized global brands. • Industry 4.0 (IND 4.0 PLC) controller with simple input of parameters (product lengths, quantities) via a central terminal. • Stepless (infinite) regulation of production speed and perfect synchronization of all machines in the line. • Built-in safety modules (Emergency stop).

Year of construction: 1985, condition: repair required (used), Extraction machine for taps Hodoi Huvhjpfx Aahjp -Handover in the current condition as seen -Current consumption: too high, machine as spare parts carrier -Manufacturer: Electro ARC, extraction machine for taps or similar tools -Clamping table: 660 x 460 mm -Outreach: 250 to 480 mm -Columns Ø: 70 mm -Dimensions: 930/780/H2045 mm -Weight: 402 kg

Year of construction: 2005, condition: good (used), machine/vehicle number: 8382, 2-head welding machine for PVC profiles Hodpfx Aezdq Tteahep

Year of construction: 2013, condition: excellent (used), machine/vehicle number: 6080008264, In very good condition (almost perfect). Hedpfx Aajzdp Rwohop

Condition: new, Machining center with 4 CNC-controlled axes for machining profiles made of aluminum, PVC, and steel Comparable to Emmegi, Elumatec, Fom, Pertici, etc. Machine frame in a stable welded construction, stress-relieved by annealing, with hardened linear guides Protective cabin covering the entire machining length Pneumatically opening protective door Milling spindle: 3.8/4.6 kW S1/S6 3.0/3.7 Nm S1/S6 max. 18,000 rpm, air-cooled with ISO 30 tool holder with minimum quantity lubrication system for the tools with level monitoring Tool magazine: 5 positions, on the left side in the machine bed, for holding drilling, milling, threading tools, angle head, and disc cutters up to Ø 150 mm Workpiece clamping: 4 pneumatic profile clamps, clamping range up to 250 mm automatic positioning via device on the Z-axis Workpiece positioning: one pneumatic reference stop each on the left and right on the A-axis Travel distances: X-axis 3500 mm Y-axis 370 mm Z-axis 348 mm A-axis ±90° Travel speeds: Hsdjwrcwpspfx Aahjp X-axis 70 m/min. Y-axis 30 m/min. Z-axis 30 m/min. A-axis 60°/sec Maximum working areas: X-axis 3270 mm Y-axis 250 mm at 0°, 116 mm at ±90° of the A-axis Z-axis: 170 mm at 0°, 200 mm at ±90° of the A-axis Operating software: CAD/CAM in 3D technology (option, included!) Programming system according to ISO standard Functionality: Linear and circular interpolation on two axes (X-Y) Three-sided machining by swiveling the A-axis 90°-0°-90° End face machining using disc cutters Operating modes: One profile bar over the entire machining length Two profile bars in divided machining length Lubrication system: Automatically controlled central lubrication for all axes, ball screws, and guides, with level monitoring Operation: 18.5" TFT Mouse + keyboard Connection data: Electrical: 400 V/50 Hz (3-phase + N + PE), 16 A, Delivery without power cable Pneumatic: Pressure 6 - 8 bar Dimensions and weight: Length: 5800 mm Width: 1640 mm Height: 2000 mm Weight: 2000 kg incl.: Graphical programming software CM3D/CAD3D Barcode reader Teleservice with remote maintenance/diagnosis for 1 year after commissioning

Condition: as good as new (ex-display), Year of construction: 2025, functionality: fully functional, VOLUMEC Electric Tapping Machine Model: JT3750M EVO2 – Made in Italy Configured as follows: Balanced 3-arm jointed system made from special aluminum Adjustable angle head for tapping threads in any position Hjdpfx Asyia Txjahep Includes alignment magnet Brushless technology electric motor, 220 V Simple speed adjustment via potentiometer Quick-change holder, size 3 Table mounting column Technical documentation CE-compliant version Technical data: Tapping capacity in steel: M8 – M36 Speed: 10 – 150 rpm Max. working radius: 1,900 mm Holder: Size 3 Weight: 25 kg Including the following special accessories: VOLUMEC automatic lubrication system VOLUMEC touchscreen control VASTC Subject to errors and prior sale!

Condition: good (used), functionality: fully functional, Year of construction: 2007, machine/vehicle number: CA90H2 PIPE BENDING ROLL, shaft diameter: 90 mm, roller diameter: 260 mm, rotational speed (min.): 8 rpm, rotational speed (max.): 8 rpm, overall weight: 1,000 kg, total length: 1,260 mm, total width: 1,000 mm, total height: 1,260 mm, power: 3.68 kW (5.00 HP), input voltage: 380 V, type of input current: three-phase, operating speed: 8 mm/s, roll diameter: 260 mm, Equipment: documentation/manual, emergency stop, PROFILE BENDING ROLL SHAFTS OUTPUT 90 MM - PIPE BENDING ROLL MARGI CA90H2 YEAR 2007 SHATS OUTPUT SIZE 90 MM SET OF UNIVERSAL ROLLERS SIZE 260 MM LATERAL CORRECTOR ROLLERS LEFT/RIGHT SIDE SCREW ADJUST 4 SET OF ROLLERS FOR TUBE BENDING MM 61 - 78 – 90 – 116- CONSOLE ELECTRIC MOVABLE ON WHEELS ALL THE CONTROLS CENTRALIZED Hodpfx Aaswkrr Tehjp DIGITAL POSITION READOUT OF BENDING ROLLS UPPER ROLL DRIVEN MOTORIZED ELECTRIC POWERED WITH GEAR UNIT SIDE ROLLERS HYDRAULIC ADJUSTMENT POWERED INDEPENDENT WITH PISTON MACHINE REVERSIBLE CAN WORK WITH SHAFTS VERTICAL/HORIZONTAL. SAFETY AND EMERGENCY STOP EQUIPMENT INSTALLED WITH THE MACHINE MANUALS AND SCHEMATICS IN ORIGINAL ALONG WITH THE MACHINE WEIGHT 1000 KG DIMENSION 1260 X 1000 X H 1260 MM

Condition: good (used), functionality: fully functional, degree of automation: manual, actuation type: electric, number of rollers: 3, shaft diameter: 130 mm, roller diameter: 380 mm, rotational speed (min.): 5 rpm, overall weight: 4,500 kg, power: 15 kW (20.39 HP), input voltage: 380 V, type of input current: three-phase, Equipment: documentation/manual, emergency stop, PROFILE BENDING ROLL 130- MODEL PARMIGIANI ITALY ELECTRO MECHANICAL MACHINE SHAFTS OUTPUT DIA..130 MM 3 ROLLERS PYRAMID UPPER ROLL DRIVEN ROTATION WITH GEARUNIT ONELECTRIC MOTOR Kw 11 Hodpsxackcofx Aahop SIDE ROLLERS BENDING POWERED ON ELECTRIC MOTOR Kw 3 UPPER ROLL DIA 380 mm SIDE ROLLERS DIA 350 mm CONTROL PANEL UPGRADED LATEST TECHNOLOGY ELECTRIC INVERTERS FULL POWER CONTROL WITH INFINITE VARIABLE SPEED COMMANDS ELECTRIC ON PORTABLE PUSH BUTTONS DIGITAL POSITION READOUT OF THE BENDING ROLLERS WEIGHT OF THE MACHINE 4,5 TON SAFETY AND EMERGENCY SYSTEM INSTALLED MACHINE WORK WITH VERTICAL SHAFTS

Condition: excellent (used), functionality: fully functional, Year of construction: 2003, control type: manual, degree of automation: manual, actuation type: hydraulic, controller manufacturer: Tauring, controller model: digital readout, number of rollers: 3, shaft diameter: 70 mm, roller diameter: 245 mm, pipe diameter (max.): 100 mm, tube wall thickness (max.): 6 mm, overall weight: 1,300 kg, total length: 1,640 mm, total width: 1,220 mm, total height: 1,580 mm, power: 5.5 kW (7.48 HP), input voltage: 400 V, input frequency: 50 Hz, type of input current: three-phase, Equipment: CE marking, documentation/manual, emergency stop, foot remote control, hardened rollers, Profile bending roll Tauring Alfa 70H2 year 2003 -Hydraulic section bending machine with digital readout Hjdpoyx Dg Ssfx Aahep -3 rolls powered driven - -dual pre-pinch pyramid roll configuration Shafts output 70 mm – Size of universal rollers 245 mm Lateral correctors left/right side hydraulic motorized operated Machine reversible can work with shafts vertical/horizontal Tooling: -Set of universal rolls and spacers Pipe bending rolls set for tube 22,5 – 61 – 76 - ( see photos of the rolls in enclosed ) Power total installed 5,5Kw Vac 380/50 Dimension 1640 x 1220 x H1580 mm Weight 1300 kgs -CAPACITY CHART IN ENCLOSED

Condition: good (used), functionality: fully functional, Year of construction: 1992, control type: manual, degree of automation: manual, actuation type: hydraulic, shaft diameter: 100 mm, roller diameter: 300 mm, bending radius (max.): 500 mm, bending radius (min.): 500 mm, rotational speed (min.): 5 rpm, rotational speed (max.): 5 rpm, pipe diameter (max.): 115 mm, tube wall thickness (max.): 3 mm, overall weight: 2,700 kg, total length: 150 mm, total width: 150 mm, total height: 150 mm, power: 7.35 kW (9.99 HP), input voltage: 380 V, operating pressure: 200 bar, year of last overhaul: 2026, Equipment: documentation/manual, emergency stop, hardened rollers, Profile bending machine model PP100 Output shafts 100 mm fully hydraulic operated lower shafts motion independent pyramid pinch -all the 3 shafts driven with gear unit and hydraulic motor -lateral correctors left/right for guiding and align the profile, -Set of rollers complete with extra rollers to seat and bend the various shape of profiles. Hedpfx Ajywhamsahjp -7 set of rollers for pipe bending from 1,5” to 4,5” inch ( see photo in enclosed ) -Centralized control panel electric with digital position readout -Safety & emergency installation -voltage 3ph 380/50 -10 Hp -capacity chart in enclosed

Condition: excellent (used), functionality: fully functional, input voltage: 230 V, input frequency: 50 Hz, DGUV certified until: 07/2027, type of input current: AC, TOP Sanomat Amigo Features: Manual dispensing via an extra-large, robust button on the outlet On/off switch for the device/cooling Simple technology Disinfection cleaning via a flushing process Accessories (tools, brushes, seals, and cleaning nozzle) Capacity: 1.5 liters Connection: 230V Dimensions: 228 x 315 x 422 mm (W x H x D) Used device, cleaned Hodsxmq Uvjpfx Aahsp Come and visit us!

Condition: excellent (used), functionality: fully functional, grinding length: 600 mm, grinding width: 500 mm, total height: 1,840 mm, total length: 2,900 mm, total width: 1,840 mm, grinding height: 230 mm, table length: 600 mm, table load: 200 kg, table width: 200 mm, For sale is a DUE Grind surface grinding machine, brand Asyst, model A525 PNC 100. This machine has been completely overhauled from a Jung 525 surface grinder. Hjdeyx D Ipspfx Aahep A key feature of this machine is its ability to operate both conventionally as well as with CNC control. The machine is in very good, near-unused condition and is ready for immediate use. Technical Data: Year of manufacture: Table length: 600 mm Table width: 200 mm X-axis traverse (stroke): 600 mm Y-axis (grinding height): 500 mm Z-axis travel, end positions +/-: 230 mm Table speed X-axis: 0.3-25 m/min Magnetic chuck dimensions: 600x200 mm Optional 3-point dresser: 350x200 mm Max. workpiece weight (incl. magnet): 200 kg Working area: 400 mm Y-axis traverse speed: 0-1,000 mm/min Z-axis traverse speed: 0-1,000 mm/min Y-axis positioning accuracy: 0.001 mm Z-axis positioning accuracy: 0.001 mm Y-axis measuring system resolution: 0.0001 mm Grinding wheel dimensions: 250x30x51 mm Spindle speed: 100-3,800 rpm Spindle motor power: 100-3,800 kW Automatic dressing with stationary diamond unit TA 3/5 Machine dimensions: 2,900x2,320x1,840 mm Weight: 2,300 kg Transport and loading can be organized Europe-wide at an additional cost if desired. Prices net plus VAT. Viewing is possible by appointment. Please contact us—our team looks forward to assisting you. Trade-in or exchange is possible! Machines Purchase / Sale BUYING & SELLING OF PRODUCTION & METALWORKING MACHINES AND MORE. Are you looking for a high-quality yet affordable metalworking machine for your production, or would you like to sell your equipment? For more information or contact options, please visit our website.

Condition: good (used), Drilling capacity: up to 10 mm Spindle mount: drill chuck Speed range: Pulley diameters: Motor side: 38; 48; 66; 78 mm Spindle side: 90; 104; 120; 133 mm Motor speed: 800 rpm Stroke: 100 mm Overhang: 300 mm Table: 400 x 400 mm Distance table – drill chuck max: 580 mm Distance table – drill chuck min: 130 mm Table: 400 x 400 mm Footprint: 750 x 480 mm Hsdpfxsh Hrkis Aahep Total power consumption: 0.4 kW Accessories/equipment: drill chuck Condition: good Weight: 170 kg Dimensions: 750 x 480 x 1,450 mm

Condition: new, Year of construction: 2026, KRBS 101: Combined tube, profile, and belt grinding machine Convenient operation thanks to easily adjustable clamping device The rotatable clamping jaws of the clamping device enable secure clamping of square tubes, round tubes, and flat steel Adjustable grinding angles from 30 - 90° and from 0° - 60° The optimized quick-change holder allows the clamping roller to be easily and quickly replaced without tools Particularly durable thanks to larger and improved roller bearings Practical clamping roller holders integrated in the base Extensive range of clamping rollers for grinding various tube diameters available as accessories Quick changeover between tube grinding and belt grinding possible Powerful motor Almost all settings can be carried out without tools (operating tool included) Large, foldable protective screen with optimal field of vision Two belt speeds allow optimal adaptation to the respective material (15 m/s best for stainless steel and aluminum, 30 m/s perfectly suited for steel) With two easily removable chip collection containers Dust extraction port (Ø 100 mm) for dust extraction systems available Dust extraction systems available as accessories Further developed, vibration-reducing base Scope of delivery: 1 x Standard grinding belt, grit size K 36 2 x Chip collection containers 1 x Wrench 1 x Grinding roller 42 mm Model: KRBS 101 Item No.: 3921001 Technical data Mains connection: 400 V Mains frequency: 50 Hz Motor power: 2.5 / 3.3 kW Grinding diameter: 20 - 76 mm Grinding angle: 30 - 90 ° (0° - 60°) Grinding belt (length x width): 2000 x 100 mm Belt speed: 15/30 m/s Dust extraction port diameter: 2 x 100 mm Dimensions (length x width x height): 1250 x 750 x 1140 mm Hsdpfx Aecnz Ayjahep Weight: 159 kg Location: Ex works - available for short-term delivery

Year of construction: 2009, condition: used, The machine is powered and can be inspected by appointment! Technical data / machine components: Year of manufacture: 12/2009 Manufacturer: PRESSTA-EISELE Voltage: 400 V Rated current: 19.2 A Operating pressure: 250 bar Dimensions: approx. 18-20 m long, approx. 3 m wide Weight, unpacked: 4.5 to 5 tons Horizontal loading magazine: 5-strand toothed belt conveyor, toothed belt width 32 mm, with teeth on the running side 17 compartments, 90 mm wide, for holding the profiles, with a pusher 40 x 10 mm (H x W) 2 sliding supports between the toothed belts as additional support Depth, max: 2,380 mm, length: 7,400 mm Loading weight, max: 1,000 kg Conveyor length: 1,850 mm Profile length, min: 1,000 mm Profile length, max: 7,300 mm Common drive via geared motor: 0.55 kW, 400 V, 50 Hz Conveyor speed: 4 m/min Material stop on the left Magazine "empty" sensor, manual cycling Tactile switch for the first loading 5 pneumatic cylinders for aligning the profiles in the longitudinal direction 6 lifting rollers for lifting the profile from the loading magazine and transferring it to the pusher Pusher, electronically positionable feed system: Reinforced design Feed length, max: 9,000 mm Mounted on the right side of the machine Profile feed from right to left Guide profile with linear guide rail Carriage: plate construction with ball bearing carriage Drive via linear motor, positioning via magnetic strip Pneumatic material gripper All 8 profiles can be automatically clamped without adjustment Hedpfx Aajzbac Tehjp Repeat accuracy: +/- 0.15 mm Rapid traverse speed, max: 180 m/min Input of the profile tube length into the control system 1 light barrier for detecting the beginning of the profile before the first punching head Punching unit: Drive: hydraulic Punching force per cylinder: 3.0 t, designed for 55 punching cycles per minute Only a maximum of 2 tools can be in operation Vertical punching head with 2 cylinders Punching stroke: 15 mm including 2 punching tools for hole ø 6.5 mm, spacing 65 mm Punching cylinders can be selected individually, guide for the profile 2 horizontal punching heads Punching stroke: 15 mm including 1 punching tool each for hole ø 6.5 mm and 1 punching tool for oblong hole 7 x 12 mm, guide for the profile Cycling lubrication system with 4 nozzles for lubricating the punches 3 l oil tank, level monitoring Saw: Drive: 5.5 kW, 400 V, 50 Hz Saw blade: ø 500 mm Saw feed: pneumatic with hydraulic control, from below Pneumatic profile clamping device: vertical and horizontal Cycling lubrication system with one nozzle Flap after the saw for removing cut-off pieces and scrap, max. 200 mm length Parts fall downwards into the provided box Longer scrap pieces are disposed of with good parts Needle marking system: Character size: 2 – 7 mm Marking window: 80 x 20 mm, 15 characters including spaces Marking always approx. 190 mm after the saw cut Data transfer from an Excel file via interface Each profile can have a different designation

Condition: ready for operation (used), Year of construction: 1985, An old but fully functional IMA double-end profiler is available. Working width: 2000mm, max. cutting height: 35mm, machine dimensions X/Y/Z: approx. 4000mm/6000mm/3000mm, weight: approx. 3000kg. Documentation available. An on-site inspection is possible. Hjdpfx Aaezc Rdkjhjp

Condition: excellent (used), CATALOG NO. 7227 TECHNICAL DATA - Working width: 40 – 300 mm - Material thickness: 10 – 35 mm - Min. material length: 270 mm - Max. material length: unlimited - Max. feed speed: 90 m/min - Feed speed steplessly adjustable via inverter from control panel - Cutting speed: 24 m/min - Milling motor power: 2x 4 kW - Milling spindle speed: 7,500 rpm - Feed motor power: 0.75 kW - Pneumatic top and side pressure - Spindle diameter: 40 mm - Motor-driven infeed roller conveyor, length 1,130 mm - Manual / automatic operation Hsdpfx Ajza Emuoahjp - PLC controller with touchscreen for easy operation - Compressed air connection: 8 bar - Extraction outlet diameter: 150 mm - Dimensions (L/W/H): 2,550 x 1,200 x 1,400 mm - Weight: 1,100 kg ADVANTAGES – German manufacturing – Operating and maintenance documentation (DTR) – Machine for tongue and groove profiling – Set includes complete cutter and head set – Motor-driven infeed roller conveyor – Unpainted – Used machine, in very good condition Net price: 107,900 PLN Net price: 25,690 EUR (according to exchange rate 4.2 EUR/PLN) (Prices may vary depending on currency fluctuations)

Condition: new, Year of construction: 2026, Ring Rolling Machine Zopf - Model ZB 60 M standard basement - year of construction 2023 - motorized - two working rolls - shaft diameter 30 mm - including standard rolls Hsdpfogh T H Dsx Aahep - bending capacity round tube up to 48 x 3,2 mm - solid material up to 30 mm - weight around 150 kg - motor 0,75 kw 400 Volt 50 Hz 3 phase

Condition: used, shelf height: 6,000 mm, Technical data for pallet rack upright: Racking system: Dexion Type: Speedlock P90 Scope of delivery includes: 01x pallet rack upright, used Material finish: Sendzimir galvanized Frame profile: 100|25 Profile dimensions: P 100 x 100 x 2.50 mm Including horizontal and diagonal braces, footplates The uprights are pre-assembled (bolted truss construction) Height: 6,000 mm Depth: 990 mm Hsdpsw I D Utsfx Aahop General information about the item: This item is only offered for collection. Any requested transport or shipping of this item will incur additional costs, which can be specified depending on the delivery location and required scope of delivery upon request.

Condition: good (used), The scope of delivery includes: 01x square tube, used Material color: sendzimir galvanized Hedpfxerxb R No Aahop Total height: approx. 5,560 mm Square profile: 140 x 140 mm Material thickness: 4 mm Drill hole grid: 75 x 50 mm Drill hole Ø: 13 mm Note: Some of the square tubes are doubled at a height of 4,910 mm or 5,010 mm are doubled up. Currently available from stock: approx. 101 pcs. Your contact at our company: Mr.: Andre Evering Mr.: Mario Klöver Mr.: Falk Deutsch General information about the article: This item is only offered for collection. Any additional transportation or shipment of this item is subject to additional costs, which can be requested from us separately depending on the place of delivery or scope of delivery.

Condition: good (used), Technical data for the CS Sigma profile: Manufacturer: Stow Type: MSNSBG 350/2.0 S 350 GD Included in the scope of supply: 1x CS Sigma profile, used Hodpfx Aasidchcehep Material color: sendzimir galvanized Overall length: approx. 5,500 mm CS Sigma profile: approx. 350 x 85 x 25 x 12 mm Material thickness: approx. 2.00 mm

Condition: ready for operation (used), Your contacts at our company: Mr. Andre Evering Mr. Mario Klöver Mr. Falk Deutsch Mr. Simon Blank We are offering a used CS Sigma profile for sale here. The stated price refers to the price per piece. Hedpfx Aogfbyzjahep The scope of supply includes: 1x CS Sigma profile, used Material color: cream white Profile length: approx. 2,200 mm CS profile dimensions: approx. 150 x 50 x 15 mm Material thickness: approx. 2.25 mm Weight per piece: approx. 10.500 kg The CS Sigma profiles may be bent and/or have slight damage or signs of rust. Our services at a glance: (Prices on request) Assembly, installation our general assembly conditions apply Rack inspection Rack inspection according to DIN EN 15635, performed according to the requirements of BGR 234, visual inspection for all racking systems Delivery with our own fleet (without unloading)

Condition: good (used), The scope of delivery includes: 01x steel girder, used Material color: sendzimir galvanized Box profile: 110 x 50 mm Total length: 4,000 mm Currently available in stock: 154 pcs. Your contact persons in our company: Mr.: Andre Evering Mr.: Mario Klöver Mr.: Falk Deutsch General information about the item: This item is only offered for collection. Any further desired transportation or a shipment of this article is associated with additional costs, which can be requested separately Hedetpf Nyspfx Aahjp depending on the place of delivery or scope of delivery.

Condition: excellent (used), Your contacts in our company: Hedpfxehvz D Ho Aahjp Mr. Andre Evering Mr. Mario Klöver Mr. Falk Deutsch Mr. Simon Blank Included in the scope of delivery: 1x CS Sigma profile, used Material color: Sendzimir galvanized Profile length: approx. 1,750 mm CS-Sigma: approx. 200 x 65 x 18 mm Material thickness: approx. 1.50 mm Weight/piece: approx. 7.950 kg Note: The angles shown in the image are not part of the offer. General information about the item: This item is offered for collection only. Any additional transport or shipping of this item will incur additional costs, which can be requested separately depending on the delivery location or scope of delivery. Our services at a glance: (Prices on request) Assembly, installation Our general assembly conditions apply. Shelf inspection Shelf inspection according to DIN EN 15635, performed according to the requirements of BGR 234, visual inspection for all shelf systems. Delivery with our own fleet (without unloading)