Used Tables for sale (16,398)

Condition: excellent (used), Year of construction: 2015, functionality: fully functional, machine/vehicle number: FXH14B001, turning length: 1,600 mm, spindle speed (max.): 2,500 rpm, travel distance Z-axis: 900 mm, workpiece weight (max.): 8,000 kg, table diameter: 1,250 mm, The machine has only been used approximately 5 times! TECHNICAL DETAILS Travel X-axis: −685 mm to +680 mm Travel Z-axis: 900 mm Travel W-axis: 800 mm Max. swing diameter: 1.600 mm Max. turning length: 1.600 mm Max. workpiece weight: 8,000 kg Fedsx Atpbopfx Ab Tsgk Table Table diameter: 1,250 mm Low speed: 5–120 rpm High speed: 150–300 rpm Machining spindle Spindle speed: 25–2,500 rpm Max. spindle torque: 478 Nm C-Axis Nominal speed: 3.33 rpm Feed range (milling): 0.1–3,000 mm/min Feed range (turning): 0.01–500 mm/rev Tool changer Tool shank: BT50 Tool magazine capacity: 16 Max. tool diameter: 220 mm Max. tool length: 500 mm Max. tool weight (milling): 25 kg Max. tool weight (turning): 50 kg Tool change time: 30 s MACHINE DETAILS Control brand: Fanuc 0i-T Dimensions Machine height: 5,625 mm Machine weight: 22,000 kg Supply Electrical connection: 90 kVA Air requirement: 5.5 kg/cm² Coolant capacity: 150 l

Condition: ready for operation (used), Year of construction: 2010, operating hours: 47,512 h, functionality: fully functional, travel distance X-axis: 2,230 mm, travel distance Y-axis: 1,400 mm, travel distance Z-axis: 850 mm, table load: 6,000 kg, spindle speed (max.): 6,000 rpm, TECHNICAL DETAILS Travel X-axis: 2,230 mm Travel Y-axis: 1,400 mm Travel Z-axis: 850 mm Table size: 2,000 mm × 1,250 mm Table load capacity: 6,000 kg Spindle speed: 6,000 rpm Spindle drive / Power: 38 kW Tool holder: SK50 Rapid traverse: 12 m/min Number of tool stations: 40 MACHINE DETAILS Control: HEIDENHAIN iTNC 435 Dimensions & Weight Machine dimensions (L × W × H): 6,135 × 4,338 × 4,150 mm Weight: 22,000 kg Fjdpfxjx Agnde Ab Tsgk Operating Hours Spindle hours: 47,512 h Program run time: 48,891 h Power-on hours: 72,846 h EQUIPMENT Coolant system Chip conveyor Internal cooling Electronic handwheel control Automatic tool measurement Workpiece measuring probe Chip flushing

Condition: ready for operation (used), Year of construction: 2010, functionality: fully functional, travel distance X-axis: 3,680 mm, travel distance Y-axis: 1,260 mm, travel distance Z-axis: 150 mm, TECHNICAL DETAILS Working area: 3,680 x 1,260 x 150 mm Milling motor: 1 unit, 8.5 kW (11.5 HP) Tool changer: 1 automatic rotary magazine with 12 positions Drill beam: 18 vertical, 8 horizontal drills, and 1 "X" saw drill Software: DXF compatible Safety standard: BUMPER protection, CE standards Weight: 3,000 kg Note: The machine has a software issue and does not include a pump. The estimated cost for correction is approximately €3,000 each. Fgodpsxzfx Eefx Ab Tjk

Year of construction: 2009, condition: ready for operation (used), functionality: fully functional, machine/vehicle number: 2426 09 1364, No minimum price – guaranteed sale to the highest bidder! This machine is suitable for processing both plates and tubes. The machine will remain powered until calendar week 09/2026. By placing a bid, you commit to timely collection during calendar weeks 10 and 11/2026. The technical data is taken from the former order confirmation. The seller assumes no liability for this information. Additional details from the order confirmation can be found in the attached images. TECHNICAL DETAILS Workpiece thickness for tubes: Ø 60–500 mm, wall thickness up to 10 mm Workpiece thickness for sheet: 90% 1 mm to 20 mm, 10% 20 mm to 30 mm Max. workpiece length: 6,000 mm Effective working area: 2,000 x 4,000 mm Plasma power source HiFocus 280i HiFocus technology for mild steel: 0.5–35 mm Severance cut in mild steel (edge start): max. 64 mm Max. piercing capacity (mild steel): 40 mm Cutting current: 10–280 A Torch connection: Plasma torch connection unit Plasma gases: Oxygen, forming gas F5, argon, hydrogen, air Swirl gases: Oxygen, nitrogen, air Torch: Plasma machine torch PerCut 370 / PerCut 370M with swirl gas Machine guideway track width: 2,600 mm Machine guideway working width: 2,000 mm Feed rate: 15,000 mm/min ZINSER oxy-fuel cutting table Fgjdpjxywupsfx Ab Tjk Working width: 2,000 mm Working length: 4,000 mm Working height: 720 mm FEATURES Fume extraction system

Year of construction: 2022, condition: ready for operation (used), functionality: fully functional, resolution (max.): 1,000 dpi, laser power: 80 W, operating speed: 3,200 mm/s, table length: 600 mm, table width: 1,000 mm, machine/vehicle number: JL2022059, TECHNICAL DETAILS Fjdpfx Absx E Snwe Togk Table length: 600 mm Table width: 1,000 mm Cutting speed: 21,120 mm/min Operating speed: 3,200 mm/s Workpiece height (max.): 230 mm Laser power: 80 W Resolution (max.): 1,000 dpi Laser type: CO2 laser MACHINE DETAILS Power supply: 230 V Dimensions & Weight Dimensions: 1,480 x 900 x 1,120 mm Weight: 300 kg EQUIPMENT Compressor JustAir PRO accessories Rotary engraving device for JL 7.5 and 10.6 Aluminum grid cutting table with vacuum function LED interior lighting Autofocus with Microsonic sensor Computer system with Mini PC 8th Gen Intel i7-8569U for machine control Table (SogesFurniture BHEU-101-OK) Chair (WOLT Bar stool BH113an) Mounts and peripherals (Samsung Curved Monitor C24F396FHR, 24 inch) Compressed air kit, extension for external compressed air incl. compressor and all hoses.

Condition: ready for operation (used), Year of construction: 2001, operating hours: 85,355 h, functionality: fully functional, machine/vehicle number: 71.405627, travel distance X-axis: 600 mm, travel distance Y-axis: 700 mm, travel distance Z-axis: 600 mm, controller model: Heidenhain Millplus, table width: 630 mm, table length: 500 mm, TECHNICAL DETAILS Fsdpfx Asx A Umnjb Tjgk Travel X-axis: 600 mm Travel Y-axis: 700 mm Travel Z-axis: 600 mm Number of pallets: 2 pcs Pallet clamping surface: 500 x 630 mm Max. load pallet changer (one-sided): 600 kg Max. load pallet changer (double-sided): 1,200 kg Max. table plate rotation: 13.6 rpm Feed rate: max. 15,000 mm/min Rapid traverse speed: max. 40 m/min Set-up operation: 2,000 mm/min Magazine positions: 60 slots Max. tool weight: 10 kg Max. tool diameter: 100 mm Max. tool length: 350 mm Measuring System Resolution: 0.001 mm Input increment: 0.001 mm Positioning tolerance: 0.010 mm MACHINE DETAILS Control: Heidenhain Millplus Dimensions & Weight Machine without tool magazine: 8,400 kg Weight of tool magazine (60 tool positions): 600 kg Floor dimensions: 4.50 m × 2.72 m × 2.63 m Electrical Data Rated power: 44 kVA Current consumption, maximum: 64 A Current draw: 80 A Supply voltage: 400 V Frequency: 50 Hz Control voltage: 24 V Operating Hours Power-on hours: 96,878 h Spindle hours: 85,355 h

Condition: like new (used), Year of construction: 2015, functionality: fully functional, machine/vehicle number: FML14BE06, travel distance X-axis: 850 mm, travel distance Y-axis: 530 mm, travel distance Z-axis: 510 mm, table load: 500 kg, spindle speed (max.): 10,000 rpm, The machine is completely unused! TECHNICAL DETAILS X travel: 850 mm Y travel: 530 mm Z travel: 510 mm Spindle speed max.: 10,000 rpm Spindle speed min.: 150 rpm Fjdpsx Ar Ucsfx Ab Tegk Distance spindle nose to table: 150–660 mm Distance spindle center to column: 585 mm Spindle diameter: 70 mm Table Table size: 1,000 × 510 mm Number and size of T-slots: 5 × 18 mm Table load capacity: 500 kg Feeds Rapid traverse X/Y/Z: 36 / 36 / 24 m/min Working feed: 1–10 m/min Accuracy Positioning accuracy: 0.01 mm Repeatability: 0.007 mm Tool Changer Tool capacity (arm type): 24 tools Tool shank: BT40 Tool change time (T-T): 2.0 s Drawbar: P40T-1 Max. tool diameter: 80 mm Max. tool length: 300 mm Max. tool weight: 7 kg MACHINE DETAILS Dimensions & Weight Footprint (W × D × H): 2,430 × 2,115 × 2,813 mm Machine weight: 5,800 kg

Condition: ready for operation (used), Year of construction: 2004, operating hours: 47,870 h, functionality: fully functional, travel distance X-axis: 3,000 mm, travel distance Y-axis: 2,100 mm, travel distance Z-axis: 760 mm, table load: 10,000 kg, rotational speed (max.): 6,000 rpm, TECHNICAL DETAILS X-axis travel: 3,000 mm Y-axis travel: 2,100 mm Z-axis travel: 760 mm Distance between columns: 2,300 mm Table size: 3,020 mm × 2,010 mm Table load capacity: 10,000 kg Fgodpfxex Agh Rj Ab Tjk Spindle taper: ISO 50 Standard spindle speed: 6,000 rpm Spindle motor (continuous / 30 min): approx. 22/26 kW Tool changer capacity: 32 tools Max. tool diameter: Ø 127 mm / Ø 215 mm Max. tool length: 350 mm Max. tool weight: 20 kg Rapid traverse X-axis: up to 20,000 mm/min Rapid traverse Y-axis: 15,000 mm/min Rapid traverse Z-axis: 15,000 mm/min Cutting feed: approx. 1 – 10,000 mm/min MACHINE DETAILS Program runtime hours: 47,870 h EQUIPMENT Extension of equipment to automatic head changer with angular milling head

Condition: new, Year of construction: 2022, functionality: fully functional, planing width: 800 mm, table length: 1,200 mm, workpiece height (max.): 300 mm, roll diameter: 150 mm, Machine is completely new and unused! TECHNICAL DETAILS Planing width: 800 mm Feed table length: 1,200 mm Feed belt speed: 4 - 19 m/min Workpiece thickness: 3 - 300 mm Extraction nozzle outlet: 180 mm 4-knife planing cutterhead diameter: 150 mm MACHINE DETAILS Motor speeds: 1/6 mm/s Fgjdpfex Eiurox Ab Tek Motor power: 20 HP (15kW) EQUIPMENT Segmented serrated feed roller Two table relief rollers Two rubber-coated outfeed rollers Electromagnetic brake Automatic star-delta start Automatic table adjustment Tersa-type cutterhead Knife setting gauge 4-point table fastening Noise insulation Machine built according to CE electrical and safety standards

Condition: ready for operation (used), Year of construction: 2007, functionality: fully functional, machine/vehicle number: TM3507008, travel distance X-axis: 3,500 mm, travel distance Y-axis: 1,100 mm, travel distance Z-axis: 1,500 mm, spindle speed (max.): 5,000 rpm, controller model: SELCA S 4045 PDH, TECHNICAL DETAILS Travel distances Longitudinal travel: 3,500 mm Cross slide travel: 1,100 mm Vertical travel: 1,500 mm Table Table dimensions: 3,800 x 1,000 mm Spindle Fgjdpfsx Aph Hex Ab Tjk Spindle taper: ISO 50 Spindle speed: 5,000 rpm Tool changer Positions: 40 CNC control Model: SELCA S 4045 PDH MACHINE DETAILS Unfortunately, no specific information regarding connected load, dimensions, or weight of the machine is provided in the supplied text. EQUIPMENT No additional equipment information has been provided.

Condition: like new (used), Year of construction: 2015, operating hours: 500 h, functionality: fully functional, machine/vehicle number: Transmatic 7360 Sport, input voltage: 400 V, type of input current: three-phase, height adjustment type: electric, input frequency: 50 Hz, Equipment: documentation/manual, MAKE: TRANSMATIC MODEL: 7360 SPORT Fsdpfx Abev Dpyvj Togk CONDITION: VERY GOOD YEAR: 2014 POWER SUPPLY: 400v 3PH AIR SUPPLY: YES NOTES: *3 MODES * ROLL TO ROLL FABRIC *ROLL PRINT TO PIECE FABRIC *ROLL FABRIC TO PIECE PRINT Designed for digital printing on cut pieces, placed prints, traditional roll-to-roll printing. This application is especially suitable in the sports T-shirt printing industry. A new oil heating system ensures uniform temperature distribution over the entire length of the cylinder with minimal energy consumption. Transmatic’s oil heating systems consume 50% less energy than electric machines.nThis calender has 3 different ways of operation. 1)Transfer papers are placed with the design facing upward on the table. Cut fabrics (fronts, backs, arms, necks, etc.) are placed on top of the pattern. The printed fabric pieces and paper leave the machine via a rear conveyor belt. 2)Use of roll transfer paper with the ability to place cut pieces of fabric. 3)Traditional printing of both transfer paper and fabrics in continuous. Electro-pneumatic felt guide control. No.6 3″ quick-connect shafts. Three friction-driven and three friction-driven and motorized rewinders. Reversing safety bar. n One outfeed conveyor belt cools and carries the printed pieces to the back of the machine to detach them. Automatic machine shut-off system after felt cooling Digital adjustable speed control. Requires compressed air.

Condition: ready for operation (used), Year of construction: 2019, Main Drive Spindle speed range 35 – 12000 Fjdpfex D Hx Eox Ab Tsgk Number of axis 5 Movement X-Axis Movement 350 mm Y-Axis Movement 550 mm Z-Axis Movement 510 mm Table Table load 300 kg This 5-axis Mazak Variaxis i-500 was manufactured in 2019, featuring a spindle speed of up to 12,000 rpm and a tool magazine capacity of 30 tools. It supports workpieces up to Ø500 mm by 350 mm and has a table load capacity of 300 kg. Consider the opportunity to buy this Mazak Variaxis i-500 universal machining centre. Contact us for more information about this machine. Application Types Milling

Condition: new, Year of construction: 2024, functionality: fully functional, machine/vehicle number: Micro 3D L570V, travel distance X-axis: 700 mm, travel distance Y-axis: 600 mm, travel distance Z-axis: 500 mm, rapid traverse Z-axis: 30 m/min, rapid traverse X-axis: 30 m/min, rapid traverse Y-axis: 30 m/min, rotary table diameter: 500 mm, table load: 300 kg, Description General Data Micro 3D L570V is 5-Axis Mold Texture Laser Processing Machine Tool. - Ability to process metal wire drawing, 3D texture, fine texture, leather texture, microstructure, etc. - Laser texture processing accuracy up to 0.01mm - Simplify your process and achieve infinite repeatability Movement X-Axis Movement 700 mm Fodpfx Abjvfmbte Tjgk Y-Axis Movement 600 mm Z-Axis Movement 500 mm Swivel range A: +110 / -110 ° Rotatable C: 360 ° Workbench: Table diameter 500 mm Processing diameter (5 axis) Max. 600mm Processing height (5 axis) Max.350mm Workpiece weight (5 axis) 300 kg Lasers Nanosecond(Optional) ≥ 50W Femtosecond(Optional) ≥ 20W

Condition: ready for operation (used), Year of construction: 2011, functionality: fully functional, DECKEL MAHO DMU60mB - Full 5 axis Simultaneous Year 2011 X730 Y560 Z560mm Heidenhain iTNC 530 Fedpfx Ajxp Htaob Tegk Spindle 18,000rpm Taper BT-40 ATC 24 magazine NC Rotary Table (C axis) Integrated on Rigid Table (0.001mm x 360 degree) NC Swivel B axis incl. Hydraulic Clamping (-120 degree / +30 degree) Spray Pistol 2bar Electronic Handwheel - iTNC530 Application tuning cycle 3D quick set system Chip Conveyor Special Price

Condition: ready for operation (used), Year of construction: 2001, functionality: fully functional, planing width: 630 mm, planing height: 250 mm, number of planer blades: 4, table length: 1,100 mm, empty load weight: 700 kg, TECHNICAL DETAILS Planing width: 630 mm Planing height: 250 mm Number of planer knives: 4 Feed speed: 7 + 14 m/min Table length: 1,110 mm MACHINE DETAILS Motor: 7.5 kW Extraction port: 160 right Dimensions & Weight Dimensions (L x W x H): 1,070 x 1,200 x 1,060 mm Weight: approx. 700 kg Fgjdpfex Eir Rex Ab Tjk EQUIPMENT Motor brake Electric height adjustment Digital display Tersa quick-change system

Condition: excellent (used), Year of construction: 2015, travel distance X-axis: 1,050 mm, travel distance Y-axis: 530 mm, travel distance Z-axis: 510 mm, workpiece weight (max.): 1,200 kg, table width: 1,350 mm, table length: 600 mm, spindle speed (max.): 8,000 rpm, VERTICAL MACHINING CENTER DMG MORI NVX5100/50 YEAR 2015 ERGOline (Mitsubishi M730UM-B) Table: 1350x600 mm Fgodpfxjx Axdks Ab Tsk Axes travel: X:1050 Y:530 Z:510 mm 8,000 rpm, BT50, ATC30 Chip conveyor Automatic tool length measurement Workpiece setup detection

Condition: like new (used), functionality: fully functional, Year of construction: 2017, machine/vehicle number: Geo Knight Maxi - Press, Please see PDF for detailed secifications: The Maxi Press AIR is an Automatic large format heat transfer press intended for more automated and higher pressure needs than the Manual version. The Maxi- AIR provides an oversized platen & a better Fjdpfx Aov Dm Udsb Tsgk production-oriented press with a single front loading table and high pressure pneumatic lifting system. This pressure system is powered by a dual air-bag, 10-ton, 20,000 lbs max force self leveling mechanism. The press is activated with a push of a button, and automatically releases at the end of the timing cycle. The front console features the Digital Knight control, regulating digital temperature and digital automatic timing control, as well as full air pressure regulation. Ideal applications that the Maxi- AIR has performed flawlessly include: large fabrics & piece goods, full-bleed printed sportswear, banners, fl oor mats, carpets, mouse pads, plastics, sheet metal and much more. Most importantly, the 20,000 lbs of regulated applied force allow for deep embedding of materials such as TILES into nomex padding for full bleed wrap-around printing, as well as larger embossing applications. The Maxi- AIR strongly supports the sublimation transfer process, as well as digitally produced transfers, hot and cold peel plastisol transfers and large format laminating processes.

Condition: used, Year of construction: 2014, functionality: fully functional, planing width: 410 mm, planer shaft diameter: 72 mm, total length of planing tables: 1,800 mm, number of planer blades: 3, type of input current: three-phase, overall weight: 355 kg, input voltage: 400 V, rotational speed (max.): 6,000 rpm, - Year of manufacture: 2014 - Not repainted - After technical inspection - Operating manual, technical documentation (DTR) TECHNICAL SPECIFICATIONS: - Planing width: 410 mm - Number of knives: 3 - Rotational speed: 6000 rpm - Cutterblock diameter: 72 mm SURFACE PLANER: - Planing width: 410 mm - Max depth of cut: 4 mm - Jointer table length: 1800 mm - Fence length: 150 x 1100 mm THICKNESSER: - Planing width: 404 mm - Table length: 600 mm - Planing height min/max: 4/225 mm - Feed speed: 6 m/min - Motor power: 4 kW - Voltage: 3×400 V - Extraction port diameter: 100 mm Fedpfx Abew H R I Ss Tjgk Machine overall dimensions: - Length: 1950 mm - Width: 800 mm - Height: 1090 mm - Weight: 355 kg

Condition: used, Year of construction: 2015, travel distance X-axis: 1,270 mm, travel distance Y-axis: 508 mm, travel distance Z-axis: 635 mm, controller manufacturer: Haas, workpiece weight (max.): 1,588 kg, total height: 3,023 mm, total length: 4,089 mm, total width: 3,353 mm, rotational speed (min.): 40 rpm, rotational speed (max.): 8,100 rpm, overall weight: 6,033 kg, Equipment: documentation/manual, CNC Vertical Machining Centre CNC Control Haas CNC Table size 1.321 x 457 mm Table load 1.588 kg Number of pallets: 1 x Movement X-axis 1.270 mm Movement Y-axis 508 mm Movement Z-axis 635 mm Spindle taper MAS BT40 Spindle speed 40 - 8.100 1/min Fsdex E S Iqepfx Ab Tegk Spindle motor 22,4kW Magazin capacity 24 + 1 If you have any questions concerning the machine, please do not hesitate to contact us by phone or e-mail. Feel free to view our other advertisements for a complete overview of our stock.

Condition: excellent (used), Linear drive, linear gearbox, lifting gearbox, spindle drive -Condition: unused, from warehouse clearance Fedpfx Aob A Iw Rob Tegk -Manufacturer: Festo -Type: DGP - 40 - 730 PPV - A - B -161782 W208 -P: max. 8 bar -Number: 3 drives available -Price: per piece -Weight: 7 kg/piece

Condition: good (used), Year of construction: 1981, 1 used surface grinding machine Make: Elbschliff/GERH Model: Ambassador Year of manufacture: 1980 Technical specifications Grinding area: 1500 x 550 mm Vertical travel: 450 mm Cross travel automatic/manual: 470/600 mm Max. table load: 800 kg Table longitudinal travel: 1500 mm Table feed: 7-25 m/min Distance table to spindle center: 430 mm Automatic vertical grinding infeed: 0.005-0.04 mm Grinding spindle motor: 7.5 kW Grinding spindle speed: 1450 rpm Net machine weight: approx. 6250 kg Subject to technical modifications and errors. Fsdpfexrzqrjx Ab Togk

Condition: used, total height: 2,550 mm, total length: 4,300 mm, total width: 1,700 mm, Empty weight: 3.500 kg Price: On request - Documentation available: No - CE certificate present: No - Drive system: Conventional - X-axis travel [mm]: 1700 - Y-axis travel [mm]: 330 - Z-axis travel [mm]: 530 - Table width [mm]: 1900 - Table depth [mm]: 400 - Magnet width [mm]: 1000 - Magnet depth [mm]: 400 - Max. grinding wheel diameter [mm]: 250 - Control: Conventional - Transport dimensions: 4300mm x 1700mm x 2550mm (l x w x h) - Transport weight [kg]: 3500kg - Transport packages [pcs.]: 2 Financial information VAT: The price shown is exclusive of VAT VAT/margin: VAT deductible for entrepreneurs Delivery and trade-in always possible for everything in the industrial sectors Fgodpfx Ajx E R Dqeb Tjk Lukas van Rossum

Condition: good (used), Year of construction: 2003, For sale Fehlmann Picomax 60 M Machining Centre Year 2003 Fgsdpfx Asx E R Dkeb Tek Specification Machine type: Vertical CNC machining centre, 3 axes (expandable to 5) CNC control: Heidenhain iTNC 530 Travel: X axis (longitudinal): 505 mm Y axis (transversal): 355 mm Z axis (vertical): 610 mm Table size: 920 mm x 380 mm Max spindle speed: 18,000 rpm or 20,000 rpm Spindle taper: SK 30 (or ISO 30) Tool magazine: 24 positions Machine weight: Approx. 3,200 kg BT MACHINES BUYING AND SELLING ALL TYPES OF INDUSTRIAL EQUIPMENT ALL TYPES OF MACHINE TOOLS

Condition: used, functionality: fully functional, spindle diameter: 30 mm, table width: 1,070 mm, type of input current: three-phase, spindle speed (min.): 3,000 rpm, spindle speed (max.): 9,000 rpm, – very good condition – manufactured in Poland – DTR (Technical Documentation) – interchangeable spindle Fedpfxsw Ip Dmj Ab Tegk TECHNICAL PARAMETERS: – spindle diameter: 30 mm – working spindle height: 120 mm – spindle height adjustment – maximum tool diameter: 400 mm – four spindle speed settings: 3000 / 4500 / 6000 / 9000 rpm – spindle rotation: right / left – table dimensions: 1020 x 1000 mm – auxiliary table dimensions (L/W): 500 x 445 mm – extendable table support to 570 mm – table height from floor: 890 mm – motor power: 5.5 kW – nozzle diameter: 2 x 120 mm – overall dimensions (L/W/H): 202 / 120 / 130 cm – weight: ~500 kg

Condition: excellent (used), Year of construction: 2019, functionality: fully functional, Vacuum membrane press ARTEX VPS - 300 350x150 TECHNICAL DATA - dimensions of working table length/width 3500x1500mm - working temperature ±40-60°C Fgodpfx Abetp Td Ts Tek - maximum temperature ±80°C - additional heating with air - power of heaters - 3×1,5kW 4,5kW - power of vacuum pump 0,75kW - capacity of vacuum pump 25m3/h - noise level 67dB - dimensions L/W/H 3900x1800x1400mm - weight about 550kg