Welding Table

WMT P-2990 x 1490

Condition: new, table length 2990 mm table width 1490 mm table height 850 - 900 mm weight of the machine ca. 0,8 t Welding table / perforated table: with milled and deburred holes Hole diameter: 28 mm The table is made of 15 mm thick, high-alloy steel S355 JR T=15 The surface is untreated. Side panels 165 mm Height adjustable from approx. 880 - 980 mm Ribbed underside for reinforcement. Including floor bearings Accessories optional! Isdpfx Aboxpxrhouoar Surface flatness 0.2 - 0.5 mm over 1000 mm.

Year of construction: 2002, condition: reconditioned (used), Beam cutting, drilling and marking line DISC SAW Brand: KALTENBACH Model: HDM 1431 / T13 / SP-CNC Year 2002 Serial number: 122.400 Weight without accessories: 10,980kh - Disc saw with downward cut. - Geared saw unit, drive system and saw blade on wear-resistant swivel bearing. - Heavy saw gear with pinions in oil bath, with inclined teeth, hardened and sharp. - Hydraulic advancement of the saw blade, adjustable according to the table, very fast recoil. - Hydraulic horizontal clamping device. Rear clamping jaw with long-stroke clamping cylinder and automatic recoil limitation. - Vertical clamping block with self-adjusting push plate. - Oblique cutting device to adjust the angle from 45° to the left to 35° to the right. - Material sensor to automatically switch from rapid advance to work advance. - Hydraulically elevating feed roller for optimum material transport on the saw table. - Economical lubrication by means of a micro-dosing installation, especially suitable for sawing profiles. - Chip collector installed on the machine bench. Specs: - Cutting disc housing: 100x4x30x250mm - Cutting disc diameter: 1,430mm - Cutting width: 9.5mm - Cutting speed: 10 to 20m/min. - Saw advance speed: 0-400mm/min. Iaedpfx Abshzbipeuor - Fast reverse speed: 2000mm/min. - Total power: 25KW - Working height: 640mm Cutting capacities: 90º cut - Angle steel: 250mm - Steel in U: 400mm - Double T-beam: 600mm - Wide flanged beam: 1008x302mm - Special wing beams: 1000x450mm Cut to degrees: IPBv beam - 75º: 1008x302mm - 60º: 910x302mm - 45º: 716x304mm - 40º: 716x304mm - 35º: 478X307mm IPBs beam - 75º: 1008x402mm - 45º: 524x357mm IPE beam - 45º: 600x220mm DRILLING UNIT Brand: Kaltenbach Model: KDX1215 Serial number: 122.401 Work capabilities: - Angular steel (minimum - maximum): 80x65x10mm - 250x250x28mm - Steel in U (minimum - maximum): 80x45mm - 400x110mm - Double T beam (minimum - maximum): 80x46mm - 600x220mm - Wide flanged beam (minimum - maximum): 100x100mm - 1,008x302mm - Extra wide wings beam: 1,200x500mm Drilling units: 3 - Vertical (Y axis) 1 pc. - Horizontal (Z and W axes) 2ud. Drilling diameters: 8 - 40mm RPM: 150 - 1100 Fast forward - Fast reverse: 3,850mm/min. - 8,000mm/min. Drilling spindle feed rate: 0-500mm/min. Fast spindle positioning tool: 15,000mm/min. Automatic tool changer: 5 u. in each drilling unit. 3x5 u. = 15 total Total power: 45KW MARKING UNIT FEEDING: 26 METERS OF ENTRY WITH BEAM FEEDER + 6 SIDE ARMS FOR BEAM ENTRY IN PARALLEL TO THE ROLLER TRACKS 30 METERS OF ROLLER TRACKS WITH OUTPUT + 6 SIDE ARMS 4 SIDE ARM FOR SMALL PIECES THE GREAT MAJORITY OF ROLLERS ARE MOTORIZED It occupies approximately 60 linear meters between input and output power. *Request machine installation plans.

Condition: new, Straightening press 150 tons with electric motor and additional manual operation by a hand lever pump, especially for fine work. Iaodpfjf Sqckjx Abuer Versions: 30t 60t 100t 150t 200t ᐳ 200 t: on request Special machines: on request New machine! We are also happy to build a customer-specific press for you. High quality hydraulic workshop press with 150 tons maximum pressing force. The press can also be opened and closed in the classic electric mode using a lever. For fine work (e.g. pressing in bearings, straightening, ...) the press also has a hand pump. This allows you to fine-tune the force manually. The printing cylinder is attached to a sliding carriage so that the cylinder can be moved sideways. In this way, you can make optimal use of the maximum stand passage width. Particularities: - 150 tons maximum pressing force - Pressure display with manometer - 2 operating modes: electrical operation or or manual operation - 2 independent hydraulic pumps - Control cabinet with motor protection monitoring and safety devices - adjustable passage height - Pull chains for easy adjustment of the passage height - massive machine frame - cylinder laterally adjustable (mounted on sliding carriage) The press can be tested under power on site. ----- Numerous other workshop presses in different designs, sizes and with optional additional equipment available! 30, 60, 100, 150, 180, 200 tons. ----- Please just contact us, we will be happy to advise you without obligation. The stated price is net plus 19% VAT. All statements without guarantee! Europe-wide delivery possible! ----- The European Commission provides a platform for out-of-court online dispute resolution (OS platform). The offer serves exclusively as an internet presentation of our goods. The contract negotiation comes about by means of telecommunication (email, fax, telephone, news portal), where we first make you a non-binding offer, in which we inform you about our general terms and conditions and the right of withdrawal with imprint before the purchase / contract is concluded.

Condition: used, Hydraulic Guillotine Shear STEINER Type HTS 30/20 R Machine No. 315 Year of manufacture: 1982 Cutting length: 3050 mm Cutting thickness: 20 mm Backgauge: 800 mm, motorized Motor power: approx. 30 kW Power supply: 400 Volts, 50 Hz - Backgauge with ELGO positioning control - Backgauge adjustment via ball screws - SICK safety light curtain at the front as reach-in protection - 3 material support arms with ball transfers - Electric foot switch - Spare blade - Oil cooler with air heat exchanger - Very robust machine with extremely solid construction Machine footprint (L x W x H): 4650 x 2610 x 3200 mm Machine weight: 27,000 kg Transport dimensions (base machine) (L x W x H): 4650 x 2610 x 3200 mm Iasdpfx Asd Hxx Aebuor Transport dimensions (additional) (L x W x H): 3500 x 2450 x 1400 mm Total weight: 27,000 kg Good condition Machine can be inspected at our warehouse in 37235 Hessisch Lichtenau, test cuts possible. Currently, the hold-down devices are being resealed; the resulting price adjustment will be made in the coming days.

Condition: used, table surface area 170 x 170 mm base plate surface area 170 x 170 mm throat 185 mm quill stroke 65 mm spindle turning speed range 500 / 896 / 1473 / 2428 U/min column diameter 65 mm total power requirement 0,37 kW Iaodpfx Abjvh Nbbjusr

Year of construction: 1980, condition: good (used), Offer 22501 Technical data approx: - max. working width 1020 mm - max. material thickness at 40 kg/mm² strength 1,5 mm - man. backgauge adjustable up to 550 mm - front angle stop - sheet holding-down device - table size 1100 x 650 mm - working height 900 mm - space requirement approx. W 1800 x H 1450 x D 850 mm - weight approx. 400 kg Iasdekzik Hepfx Abusr - mobile

Condition: new, saw blade diameter 350 mm capacity 90 degrees: round 115 mm capacity 90 degrees: square 95 mm 180 x 95 mm Ijdpfx Abofg Rlcsuear Working height 925 mm saw blade turning speeds 15 - 90 U/min total power requirement 3,0 kW weight of the machine ca. 0,68 t dimensions of the machine ca. 0,8 x 1,0 x 1,85 m Electro-pneumatic, vertical, linear-guided automatic saw for use of HSS saw blades to make series cuts from 60° left to 45° right steel. The machine also works in semi-automatic cycle. CNC machine with multiprocessor and two with MEP control, latest generation controlled axes that make it possible to achieve 1000 with the same material thickness different cutting programs, each with a different cutting length and number of pieces program.

Condition: like new (used), Year of construction: 2012, operating hours: 500 h, functionality: fully functional, overall weight: 1,500 kg, fuel type: diesel, color: black, output current: 228 A, output voltage: 400 V, output frequency: 50 Hz, nominal power: 120 kW (163.15 HP), nominal power (apparent): 150 kVA, total length: 2,550 mm, total width: 1,110 mm, total height: 1,500 mm, rotational speed (max.): 1,500 rpm, motor manufacturer: John Deere, type of cooling: water, Brand: SDMO Model: J165 Year of manufacture: 2012 Serial number: On request Operating hours (indicated): Low hours Capacity (kVA): 150 - 174 (60Hz) Capacity (kW): 120 - 139 (60Hz) Engine brand: John Deere Engine model: 6068HF120 Fuel: Diesel Alternator brand: Leroy Somer Alternator model: LSA44.2M95J 6/4 Voltage: 230-400V Frequency (Hz): 50 - 60 RPM: 1500 - 1800 (60Hz) Amperes (A): 228 Iedpfx Aboydk D Toujar Dimensions LxWxH (mm): 2550 x 1110 x 1500 Weight (kg) approx.: 1500 Units in stock: 1 Made in: France Comments: Low hours, ex-emergency set, in good working condition.

Condition: new, Year of construction: 2025, -TFON Edge Rounding & Surface Purification System. -Material Compatibility. Mild Steel, Aluminum, and Stainless Steel. Iaedpfjhq A T Ujx Abusr -Working Thickness Range: Accommodates material thicknesses from 0 to 120 mm. -Edge Rounding Provides Radius 2 edge rounding for smooth, safe edges that enhance both the appearance and functionality of the workpiece. -Precision Control: Equipped with a Siemens automation system for accurate and consistent control throughout the entire process. Independent Stations: Multiple processing stations enable versatile operations, allowing different tasks to be performed simultaneously or sequentially Table Options: Available working table sizes of 650 mm, 1000 mm, or 1300 mm to meet specific production requirements Table Types: Flexible configurations including magnetic, vacuum, or magnetic-vacuum tables ensure secure support for various materials and part sizes. Plasma and Oxygen Technology: Utilizes advanced plasma and oxygen technology to effectively remove heavy burrs and dross after cutting, delivering cleaner and smoother surfaces Surface Purification: Efficiently removes surface contaminants such as rust, oxide, and scale, preparing parts for further processing Edge Rounding for Coating: Prepares parts perfectly for painting and coating by ensuring a uniform, imperfection-free surface Industry Applications: Ideal for Steel Service Centers, Energy, Mining, Construction, and Automotive sectors, offering tailored solutions for heavy-duty applications. Uniform Results: Six flap wheels operate in unison to provide consistent, equal radius edges on every part. Pneumatic Oscillation System: Extends the lifespan of emery bands by minimizing wear and maintaining consistent performance over time.

Condition: excellent (used), Year of construction: 2017, MAZAK QUICK TURN 250MY Max. turning diameter: 380 mm Max. milling speed: 5,000 rpm Max. spindle speed: 4,000 rpm Max. bar capacity: 80 mm Machine is equipped with: - Mazatrol SmoothG CNC control - KITAGAWA three-jaw chuck BB-210, diameter 254 mm - Tool Eye - C-axis - Y-axis - automatic parts catcher - interface for bar feeder - signal light (3-color LED) - reinforced coolant pump - chip conveyor - standard MAZAK tool package Iajdpfx Asyki Taobusr