Used Table Trolley for sale (17,940)

Condition: new, Parker Nlsdpfjzdqb Dex Ad Ssc Cutting table Cross-cutting, longitudinal cutting, stacking 280x230x100 cm New, still in original packaging from the manufacturer! Scope of delivery: (See images) (Changes and errors in the technical data are subject to change!) We will be happy to answer any further questions you may have over the phone.

Condition: ready for operation (used), An Asco Rail assembly and disassembly stand for brake slack adjusters with a functional testing device is available. Operating pressure: 6bar, max. test force: 100kN, cylinder stroke: 300mm. Documentation available. An on-site inspection is possible. Nlsdpfx Adjzf Nbrj Soc

Condition: excellent (used), lifting height: 1,050 mm, load capacity: 500 kg, total length: 1,350 mm, working height: 1,050 mm, operating pressure: 200 bar, power: 0.75 kW (1.02 HP), lifting time: 8 s, Scissor lift table, WTT Fördertechnik, Series E 05.08.5.1.0.RB, Equipped with non-driven support rollers made of precision steel tubing, 50 x 1.5 mm wall thickness, with a 12 mm spring axle. Support roller spacing: 150 mm Roller track length: 1350 mm Nsdpfx Adev Acn Rs Solc Installation length of the support rollers (width): 550 mm Platform width: 600 mm Roller track height in the transfer area: 280 mm Load capacity: 500 kg Useful lifting height: 1050 mm Lifting time: approx. 8 sec. Foot protection contact strips Hand-held push button Overload protection: installed via a cable pull brake on the roller track frame. Integrated hydraulic unit: 0.75 kW, 200 bar Operating voltage: 400 V, 50 Hz (Subject to changes and errors in the technical data, as well as prior sale)

Condition: excellent (used), lifting height: 1,350 mm, load capacity: 1,000 kg, total length: 2,500 mm, total width: 600 mm, working height: 1,350 mm, roll diameter: 50 mm, power: 1.1 kW (1.50 HP), lifting time: 15 s, construction width: 600 mm, roll spacing: 150 mm, roll width: 550 mm, segment length: 2,500 mm, Scissor lift table, WTT Fördertechnik, Series E 10.10.5.1.0.RB, Roller conveyor length: 2500 mm Platform width: 600 mm (rollers 550 mm) Load capacity: max. 1000 kg Useful lift: max. 1350 mm Total: 7 units Sold individually Equipped with non-driven support rollers made of precision steel tube, 50 x 1.5 mm wall thickness, with a 12 mm spring axle. Support roller spacing: 150 mm Installation length of the support rollers (width): 550 mm Roller conveyor height in the transfer area: 280 mm Lifting time: approx. 15 sec. Foot protection contact strips Nlsdpfxjv Acnkj Ad Sec Hand-held switch on a 3 m long cable Automatic stacking protection - by slightly lifting the platform, the support rollers are automatically braked. Foldable inspection supports Built-in hydraulic unit: 1.1 kW, 200 bar Operating voltage: 400 V, 50 Hz (Subject to changes and errors in the technical data, as well as prior sale)

Condition: excellent (used), Year of construction: 2018, functionality: fully functional, Double table machining center Working range X 2,590 mm Working range Y 2,260 mm Working range Z 400 mm Number of milling spindles 2 Liquid-cooled spindle Main motor 19.2 kW Nlodpfx Asuqw E Nsd Sjc Max rotational speed 24,000 rpm Aggregate heads 4 C-axis Tool clamping system HSK-F63 Tool change positions central magazine 24 Tool change on each head from 12 positions Boring heads vert. 20 (for each head) Horizontal boring heads X 8 Horizontal boring heads Y 8 Blade for grooves in X, in Y 2 Platens Number 4 360 m³/h vacuum pumps T Jet system for chip blowing Nesting Manual labeling Bar code reader Tool length measurement Software BIESSE BIESSEWORKS ADVANCED, BIESSE B_NEST Weight 17,900 kg

Condition: used, Year of construction: 2002, functionality: unexamined, inner dimension length: 865 mm, inner dimension width: 875 mm, inner dimension height: 1,980 mm, We are offering the following used Heuft 10.12,5.08 and 10.12,5.10 baking carts and peel board carts, manufactured in 2002. Manufacturer: Heuft Model: 10.12,5.08 and 10.12,5.10 Year of manufacture: 2002 Condition: used If you have any questions or require further information, please send us a message or call us. No. Cart Type Condition Width/Depth/Height 400 Peel board cart VTR 10.12,5.08 2 865 875 1980 401 Peel board cart VTR 10.12,5.08 2 865 875 1980 402 Peel board cart VTR 10.12,5.08 2 865 875 1980 403 Peel board cart VTR 10.12,5.08 2 865 875 1980 404 Peel board cart VTR 10.12,5.08 2 865 875 1980 Njdpfx Aszf Hiaod Sslc 405 Peel board cart VTR 10.12,5.08 2 865 875 1980 406 Peel board cart VTR 10.12,5.08 2 865 875 1980 407 Peel board cart VTR 10.12,5.08 2 865 875 1980 408 Peel board cart VTR 10.12,5.08 2 865 875 1980 409 Peel board cart VTR 10.12,5.08 2 865 875 1980 410 Peel board cart VTR 10.12,5.08 2 865 875 1980 411 Peel board cart VTR 10.12,5.08 2 865 875 1980 412 Peel board cart VTR 10.12,5.08 2 865 875 1980 413 Peel board cart VTR 10.12,5.08 2 865 875 1980 414 Peel board cart VTR 10.12,5.08 2 865 875 1980 415 Peel board cart VTR 10.12,5.08 2 865 875 1980 416 Peel board cart VTR 10.12,5.08 2 865 875 1980 417 Peel board cart VTR 10.12,5.08 2 865 875 1980 418 Peel board cart VTR 10.12,5.08 2 865 875 1980 419 Peel board cart VTR 10.12,5.08 2 865 875 1980 420 Peel board cart VTR 10.12,5.08 2 865 875 1980 421 Peel board cart VTR 10.12,5.08 2 865 875 1980 422 Peel board cart VTR 10.12,5.08 2 865 875 1980 423 Peel board cart VTR 10.12,5.08 2 865 875 1980 424 425 426 Baking cart VTR 10.12,5.10 2 1065 650 1930 427 Baking cart VTR 10.12,5.10 2 1065 650 1930 428 Baking cart VTR 10.12,5.10 2 1065 650 1930 429 Baking cart VTR 10.12,5.10 2 1065 650 1930 430 Baking cart VTR 10.12,5.10 2 1065 650 1930 431 Baking cart VTR 10.12,5.10 2 1065 650 1930 432 Baking cart VTR 10.12,5.10 2 1065 650 1930 433 Baking cart VTR 10.12,5.08 2 1065 650 1930 434 Baking cart VTR 10.12,5.08 2 1065 650 1930 435 Baking cart VTR 10.12,5.08 2 1065 650 1930 436 Baking cart VTR 10.12,5.08 2 1065 650 1930 437 Baking cart VTR 10.12,5.08 2 1065 650 1930 438 Baking cart VTR 10.12,5.08 2 1065 650 1930 439 Baking cart VTR 10.12,5.08 2 1065 650 1930 440 Baking cart VTR 10.12,5.08 2 1065 650 1930 441 Baking cart VTR 10.12,5.08 2 1065 650 1930 442 Baking cart VTR 10.12,5.08 2 1065 650 1930 443 Baking cart VTR 10.12,5.08 2 1065 650 1930

Condition: used, Year of construction: 1969, rotary table diameter 1000 mm grinding height 500 mm Nsdsu Su Apopfx Ad Selc grinding head - power requirement 15/5,5 kW total power requirement 30 kW weight of the machine ca. 18 t dimensions of the machine ca. m S I E L E M A N N (Germany) Hydraulic Rotary Table Internal and Face Grinding Machine with two grinding heads and with horizontal workpiece clamping Model RFsB 100 Year 1969 / fully reconditioned by the manufacturer in 1990 _____ Max workpiece Ø 1,000 mm Max. height of workpiece, approx. 400 mm Mounting height under grinding spindles approx. 500 mm Grindable Bore Ø, approx. 50 – 900 mm Max. Workpiece weight approx.. 900 kg Distance between Table bore and column 1.150 mm Table Ø / Face plate Ø, approx. 1,000 mm Table speeds, hydraulic, infinitely variable, right/left 5 – 60 rpm Table/workpiece infeed, 5 steps 0.0025 – 0.025 mm/stroke Table stroke approx. 500 mm Distance between grinding spindle and machine body 600 mm Surface Grinding Head Ø (Segmented wheel) 450 mm Grinding slides stroke, max. 500 mm Grinding slide speeds, infinitely variable 0.2 – 1 m/m Max. Internal Grinding spindle Ø 140/100 mm Grinding cup wheel Ø, up to approx. 200 mm Motor for Surface Grinding 15 kW / Motor for Internal Grinding Spindle 5,5 kW Total electrical load, approx. 30 kW - 380 V - 50 Hz Weight, approx. 18,000 kg Accessories / Special Features • The rotary table carries the workpiece and is also actuating the automatic grinding infeed • The relevant Grinding head can be swivelled in by turning the Column (hydraulic lift) so the workpieces can be ground in one setting with exact angles. • Built-on magnetic face plate, Ø approx. 1,000 mm, with 5 T-slots and stepless adjustment for the magnetism • Automatic workpiece infeed, with automatic depth stop. • Separate Height adjustment of internal grinding head, Grinding spindle Ø 100 mm. • Dressing devices mounted on each grinding head, Separate Switch Cabinet and hydraulic unit, • No Coolant Device available This machine is ideal for grinding bulky and heavy workpieces like housings, gears (!) bearing rings, cylindrical knives, etc. Condition: Good. Machine can be inspected soon under power Delivery : Ex stock as inspected. Payment : Net, after conclusion of contract.

Condition: used, Year of construction: 1978, spindle diameter 105 mm x-travel 1250 mm Nlodpjt Hwtxjfx Ad Sjc y-travel 1000 mm z-travel 600 mm table length 1100 mm table width 900 mm tool adaptor 50 ISO / MK total power requirement kW weight of the machine ca. t CNC Table Borer, Reconditioned 2002, BOSCH CC 300

Year of construction: 1980, condition: used, table length 2000 mm table width 1800 mm table load 12,5 t total power requirement 10 kW weight of the machine ca. 7,5 t dimensions of the machine ca. m Table size approx. 2,000 x 1,800 mm Max. weight of workpiece, approx. 12,500 kg Table travel, longitudinal 1,250 mm Table height above floor 920 mm Longitudinal feed 0.63 - 2,000 mm/min Turning feed, with Ø 1,000 mm 1 - 3,150 mm/min Longitudinal quick feed 2,000 mm/min Turning quick feed, with Ø 1,000 mm 3,150 mm/min Weight of machine 7,500 kg External dimensions of machine 3,700 x 2,100 x 920 mm Total electrical load 10 KW - 180 V - 50 Hz Accessories / Special Features * Telescopic covers for the guides. * Infinitely variable table feed. * Optical display for setting and reading the longitudinal adjustment. * Optical display for setting and reading the angle. Condition : Satisfactory to good. Machine can be inspected under power. Delivery : Ex stock as inspected Payment : Net, after conclusion of contract Nedot Hwq Ropfx Ad Sjlc Thank you for your interest.

Condition: used, functionality: fully functional, total length: 1,470 mm, table width: 1,140 mm, input voltage: 400 V, working height: 970 mm, Scissor lift table for raising pallets to a comfortable working height. Nlodpfxezf Ehzj Ad Sec

Condition: as good as new (ex-display), Year of construction: 2022, Wood-Mizer MS300 High-precision table saw Machine used for training and demonstrations, checked and factory-adjusted. Processing parameters: Max. thickness at perpendicular cut: 100 mm Max. thickness at 45° cut: 65 mm Technical specifications: Circular saw Arbor diameter: 30 mm Saw blade diameter: 315 mm Max. blade width: 4 mm Blade tilt adjustment range: 0–45° Distance between blade and parallel fence: 800 mm Saw blade speed: 4,500 rpm Sliding table (aluminum): Table length: 1,400 mm Table width: 350 mm Nlodpfx Adsyr Dfae Ssc Sliding stroke: 1,235 mm Sliding table extension: 500 x 360 mm Working table (cast iron): Table length: 900 mm Table width: 750 mm Table height: 850 mm Table extension: 520 x 150 mm Motor: 3 kW Extraction ports: 1x100 mm, 1x60 mm Weight: 260 kg

Condition: used, table diameter 315 mm workpiece weight 50 kg centre height mm Nledpfx Ajt Dqu Dsd Soc weight of the machine ca. 60 Kg dimensions of the machine ca. 0,4 x 0,4 x 0,2 m vertical rotary table, Height from assembly space to centre of disk = 500 mm

Condition: used, Year of construction: 1982, spindle diameter 90 mm x-travel 900 mm y-travel 900 mm z-axis 1200 mm w-axis 800 mm table surface area 900 x 1200 mm rotation movement 360 Grad table load 6,0 t turning speeds 25 - 1400 U/min spindle taper ISO 40 voltage 380 V / 50 Hz drive milling spindle 9,2 kW total power requirement 35 KVA weight of the machine ca. 10 t dimensions of the machine ca. 4,5 x 2,8 x 2,5 m • Machine had been completely refurbished in 1994 by the manufacturer • new switch cabinet, • new Servo-drive BOSCH and HEIDENHAIN-control TNC 360,(3D control) • valve plate Ø 600 mm. • traverse distance: 150 mm Njdpfxetv H Uce Ad Sslc The machine is currently not ready for demonstration due to a fault in the electrical system.

Condition: used, Year of construction: 1988, table length 2000 mm table width 1800 mm table load 12,5 t table adjustment - longitudinal 1.250 mm table rotating 360 Grad table positioning 4 x 90 ° Nledpfx Adjtv H Txj Sjc feeds - longitudinal 0,63 - 2.000 mm/min total power requirement 4 kW weight of the machine ca. 7,6 t

Condition: used, spindle diameter 90 mm x-travel 1000 mm y-travel 1200 mm z-travel 1200 mm feed movement 710 mm spindle taper ISO 40 turning speed range 8 - 1600 U/min Nodpfotv Ibdex Ad Sjlc table-size 1120 x 1000 mm table rotating 360 ° table load 2,5 t total power requirement 11 kW weight of the machine ca. 10 t dimensions of the machine ca. 4,5 x 3,3 x 3 m separate switchboard, rapid traverse some tool holders, without facing plate, without steady rest,

Condition: like new (used), Year of construction: 2014, functionality: fully functional, SCM TF130 CLASS Spindle Moulder Nljdpfx Asy R Tw Dod Sec Used machine Year: 2014 Features: - Manual adjustment for the lifting of the spindle arbor, equipped with a digital display for accurate working height positioning - Programmable fence with wooden infeed/outfeed tables, dust extraction hood, and wooden table extension; maximum tool diameter Ø250 mm - Spindle speeds: 3,000 / 4,500 / 6,000 / 7,000 / 10,000 rpm - Digital display indicating selected spindle speed - Electrical pre-equipment for power feed unit - Spindle rotation reversal with electric interlock for start-up safety - Automatic star-delta motor starting - Motor power [S6 -40%]: 7kW / 9.5 HP / 50Hz - Safety guard for spindle operations (max tool Ø160 mm) - Emergency stop button - Safety micro-switches for spindle lock - Safety micro-switch on the motor access door - Main isolator switch with lock - Thermal-magnetic overload protection - Transformer for auxiliary circuit: 110V - Automatic motor brake on the main motor - CE conformity certificate Technical Data: - Working table dimensions: 1,200 x 730 mm - Useful spindle length CE Ø30/35 (40/50): 140 (180) mm - Spindle arbor projection from the table: 52 mm - Spindle arbor projection from the table with interchangeable arbor: 92 mm - Maximum retractable tool diameter below table, with ring table: 320 x 85 mm (with sector table Fast=300 x 85 mm) - Fence travel with mechanical programming: 125 mm (positioning from spindle axis: -125 to +125 mm with MK5 arbor) - External diameter of dust extraction port on spindle hood: 120 mm - External diameter of extraction ports on the base (for forced air-cooling of the electrospindle): 120 mm - Extraction system air speed: 20 m/s - Extraction system air consumption: 1,700 m³/h Options on machine: - Bar fence - “TL” version for tenoning and profiling (CE compliant) - includes manually operated tenoning carriage - eccentric clamp - adjustable telescopic fence with 4 reference stops for programming workpiece length - break-out preventer on the fence with reference stop - infeed table extension with adjustable front support bar for large workpieces - tenoning hood with dust extraction: - quick tool change, max tool diameter 300 mm - with 30 to 35 mm arbor, max tool diameter 300 mm - with 40 to 50 mm arbor, max tool diameter 350 mm - emergency stop button - operator protection bar - micro-switches for monitoring and limiting to 3,000/4,500 rpm during tenoning operations. Note: - Available only for machines compliant with CE standards. - Available only with mechanically adjustable spindle fence or, alternatively, the "Flex" fence. - Minimum required main motor power: 7 kW.

Year of construction: 2001, condition: used, machine/vehicle number: 29, Manufacturer FORST Machinenumber: 29 Year of Manufacturing: 2001 Force max.: 63 kN Stroke max.: 1000 mm Weight: 7 tons (machine + control cabinet + coolant system) Broaching Stations: 1 Cycle Time: 28 sec. Cutting Speed max.: 8 m/sec Nlsdsdnk Ukepfx Ad Ssc back hub: 16 m/sec Shank Ø: 32 mm Endfitting Ø: 25 mm

Condition: new, Year of construction: 2026, functionality: fully functional, The basic components of the grinding machine include: base, slides, column with grinding wheel spindle, rotary table, and control cabinet. The table is driven by a mechanical transmission and a gearbox-frequency converter unit, and performs a rotary motion. The rotary speed of the table is adjusted using a potentiometer on the machine's control panel. In manual operation, the machine will have the ability to perform pulsed rotary movement of the table, controlled from the operator's panel. The transverse feed is performed by the column and spindle moving along the rolling guides of the base. This movement is realized using a ball screw with a belt drive and an asynchronous motor controlled by a frequency inverter. The vertical feed is performed by the spindle moving along the sliding guides of the column. A ball screw is used to drive the vertical feed. The continuous feed of the column is stepless. These values are set from the control panel. Njdpezfyvyjfx Ad Selc The machine will be equipped with a direct digital readout on the vertical axis with a resolution of 0.001 mm. An electronic handwheel for vertical axis feed during manual operation and an operator panel (programmable display) will be placed on the operator's panel. The grinding machine will have smooth adjustment of the grinding wheel spindle speed and the table speed. The machine will be able to operate in an automatic cycle with the possibility of programming the number of sparking passes and other parameters necessary for grinding in an automatic cycle. Safe operation of the grinding machine is ensured by a semi-enclosed cabin and all electrical and mechanical safeguards in accordance with CE standards. 1 Table working surface Ø800 mm 2 Maximum distance between the table surface and the spindle axis during manual spindle feed 350 mm 3 Minimum distance between the table surface and the spindle axis 125 mm 4 Maximum weight of the workpiece 2500 N 5 Range of steplessly adjustable table speed 2-100 m/min 6 Maximum horizontal column feed 450 mm 7 Range of steplessly adjustable column feed speed 0.2 – 3 m/min 8 Grinding wheel feed per: 1 encoder unit 0.001 mm 9 Minimum automatic grinding wheel feed 0.001 mm 10 Maximum automatic grinding wheel feed 0.040 mm 11 Speed of accelerated grinding wheel feed 1 m/min 12 Grinding wheel spindle speed 1000 – 2500 RPM 13 Diameter of new grinding wheel 400 mm 14 Diameter of worn grinding wheel 250 mm 15 Bore for mounting the grinding wheel 127 mm 16 Width of grinding wheel nominal / maximum 50 mm

Condition: used, Year of construction: 2017, Table dimensions: 2700 x 900 mm HSK 63 F interface 2x spindles for HSK 63 F interface (30 + 40 mm) Spindle tilt: -45° to +45° Usable spindle length: 180 mm Right and left-hand rotation 4-roller feed with motorized height/width adjustment and pneumatic clamping 7.5 kW brake motor with electronic inverter CNC adjustment for: - spindle tilt - spindle height adjustment - complete fence - front part of the fence - table positioning in front of the spindle - electronically variable speed control 1,000 - 10,000 rpm - Aigner milling fence with aluminum jaws - Touchscreen with graphic function - Windows operating system - Camera for importing tool and profile images - Complete fence can be fully swiveled away - automatic star-delta start - central lubrication Weight approx. 1360 kg Location: Nattheim Nljdpfeyudidox Ad Sjc

Condition: used, functionality: fully functional, total width: 860 mm, total length: 2,540 mm, total height: 750 mm, overall weight: 600 kg, plate height: 120 mm, Optical table (Newport) - Dimensions 2400 x 900 x 200mm - inkl. threads for clamping - with damped steel frame Nsdpfx Adjzfxtqs Solc - working level 750mm

Condition: excellent (used), Year of construction: 2000, Ref:11105 . 2000 Polar RA-4 Paper Jogger Comprising; Air table and left & right side flaps for smooth pile flow Tilting table with adjustable angle for light or heavy stock Tilt action to the left or right Nedjy Uya Tspfx Ad Solc Automatic air removing roller – various functions Including air table blower unit. N.B. In-house, 6 bar compressed air line required. Specification: Useable surface, Max: 90 x 115 cm Pile height, Max: 16.5 cm Power requirements : 3pH, 380-415V, 1.5kW. Space required (tilted): 124 x 155 cm.

Condition: good (used), Muro 1002 Paper Jogger Description: Njdpfxjzdat Do Ad Sslc The jogger is designed for aligning collected sets of forms, brochures, and printing sheets. The motor speed is adjustable. The jogging cassette tilt angle is 45°. Technical specifications: Format: 43 x 43 cm Stack height: 10 cm External dimensions: 60 x 60 cm Power supply: 230 V Weight: 40 kg

Condition: not inspected (used), YOM 1998, Hidenhein 430 .12000/1000/1450mm. 36000 kg Nlodpfxjzfw A Do Ad Ssc

Condition: excellent (used), Year of construction: 2023, functionality: fully functional, overall weight: 55 kg, total length: 700 mm, total width: 1,880 mm, total height: 850 mm, TOP work table AT 1880 with stainless steel top Work table for gastronomy/bakery Stainless steel worktop Lower storage shelf Reinforced welded construction Approx. dimensions: 1880 x 700 x 850 mm (W x D x H) Used unit, cleaned Option: Nlsdpfeyhy E Sjx Ad Sjc Delivery service New castors/wheels We have many more work tables in stock!

Condition: used, Angle table with 5 T-slots Nedecu Im Dopfx Ad Solc 12 mm T-slot width Length 680 mm Width 260 mm Height 265 mm