Used Jogger Table for sale (46,273)

Condition: good (used), Perfecta BSB-2-L Jogger The machine is 100% functional and in excellent condition. Equipped with an air-squeezing roller. Technical specifications: Maximum format: 640×920 mm Hnedpfx Afjxk U H Reisu Stack height: 120 mm Weight: 550 kg Power supply: 400 V Air table Air-squeezing roller Adjustable: tilt angle, shaking force, roller pressure.

Condition: good (used), Baumann BSB 3L Paper Jogger This machine is 100% functional and in very good condition. This is the latest design from a German manufacturer. Hedpexmva Defx Afisnu Technical Specifications: Maximum format: 1150x900mm Stack height: 160mm Weight: 550kg Power supply: 400V Air squeezing roller Air table Tilt angle adjustment Automatic flap opening Jogging frequency adjustment (inverter) Adjustable squeezing roller force and speed. Chrome-plated table surface

Condition: ready for operation (used), Year of construction: 2006, functionality: fully functional, Automatic jogger with air discharge roller and pneumatic folding stops Hjdpfow Nlaasx Afienu After the jogging process is completed, air is pressed out of the cutting layer. You can jog once or twice, with the pressing pressure of the first jogging operation being adjustable; when the table is tilted, intermediate jogging is also possible. – Stainless steel-plated table surface 72 x 87 cm – Minimum layer height: 30 mm – Maximum layer height: 165 mm – Table height: 860 – 950 mm – Compressed air requirement at 6 – 8 bar: approx. 2 l/min

Condition: good (used), Polar Mohr RA 2 jogger with Roller The machine is 100% functional, in very good condition. This is the latest design from a German manufacturer, currently in production. Technical data: Hodpfxjwxtabo Afionu Max format: B2+ Stack height: 150mm Weight: 450kg Power supply: 400V Air squeezing roller Air table Possibility of shaking to the right/left Adjustable angle of inclination Adjustable shaking frequency (on the inverter) Adjustable force and speed of the air squeezing roller. Chrome table surface Documentation

Condition: good (used), Polar Mohr R-2 Paper Jogger Machine in perfect condition, rarely used. Purchased from a printing house warehouse. Technical data: Max format: 820x720mm Stack height: 150mm Weight: 450kg Power supply: 400V Air table Possibility of jogging to the right/left Adjustable inclination angle Adjustable jogging frequency (on the inverter) Chrome table surface Hnedpfowt Sqbsx Afiju Pneumatically controlled flaps

Condition: good (used), Polar Mohr RA-2 Jogger with roller and scale The machine is in perfect condition, ready to work. Technical data: Max format: B2+ Hjdpjwt Sqhjfx Afienu Stack height: 150mm Weight: 450kg (jogger) + 150kg (weighing device) Power supply: 400V Air squeezing roller Air table Possibility of shaking to the right/left Adjustable angle of inclination Adjustable shaking frequency (on the inverter) Adjustable force and speed of the air squeezing roller. Chrome table surface The machine is additionally equipped with a Bizerba sheet weighing system that allows for counting sheets on the machine, taring, packaging, etc.

Condition: good (used), Table size:1500x1500mm Capacity : 6t Hodpfxefvqmxe Afionu Dimension: 1600x2500x2000mm Hydraulic

Condition: used, Outfeed table before resaw IDL000793 Hnedpfxsul Rgvs Afiju

Condition: good (used), Hard cover assembly table The device is fully functional and in very good condition. Technical data: Max. binding width 810mm. Power supply: Pneumatic Weight: 140 kg Hodpfxsvkt N Uo Afisnu Equipment: – elements for fixing the cardboard – module for wrapping the cover

Condition: repair required (used), functionality: limited functionality, For sale Vecoplan infeed table. Can be used for infeeding up to 3.1meter long woodwaist to chipper feeder. Hjdpovuk Uiofx Afijnu

Condition: good (used), Rotating table Lazy Susan Hnedpfx Afetpgxijiju Perfect for buffering products, bags or trays prior to further handling. This to prevent from overflowing and giving several issues in (automatic) production lines. Height: 80 cm (height is adjustable) Diamter: 120 cm

Condition: excellent (used), Year of construction: 2020, - total length: 8,1 m - total width: 1200 mm - height: 950 mm Hjdpfx Aetddw Asfienu Hydraulic lift, lifting capacity around 1 ton.

Condition: used, Log table with elevator and log scanner Rema Control - logs up to 6 m - between rails 1100/1050/ 1050/1250 mm - log table length: 10 m - Rema Scanner - log infeed conveyor Hnjdpfx Afou Smq Ssiou

Condition: ready for operation (used), Year of construction: 2019, functionality: fully functional, machine/vehicle number: 1000030194, table length: 4,500 mm, table width: 3,000 mm, TECHNICAL DETAILS Table dimensions: 3000 x 4500 mm MACHINE DETAILS Supply voltage: 400 VAC Rated current at full load: 5.04 A Hjdexdkxiepfx Afisnu Number of supply phases: 3 Power: 2.7 kW Frequency: 50 Hz Note: The machine will be available from 02/12/2025!

Condition: new, table length 3000 mm table width 1500 mm table height 850 mm side-clamping surface: 200 (Höhe) mm weight 1517 kg SIEGMUND authorized dealer - all items available! Product description - high quality steel S355J2 + N + plasma nitriding - Material thickness approx. 24.5 - 27 mm - Hole Ø 28 mm - Drilling surface 100x100 mm grid - Rounded corners, edges and holes - Height of side wall 200 mm - Distance between holes in side wall 50 mm - Including scaling on the surface - Construction reinforced by ribs - Grid lines enable precise structures Hodpfx Aoxaa Nvefijnu The welding tables are provided with a scale as standard. Plasma nitrided version: - Protection against rust / scratches / weld spatter adhesion - more corrosion-resistant / higher load capacity Furnishing: - 28 hole pattern / dimensions 3000 x 1500 x 200 mm - Plasma nitrided version with scale - incl. 6x base equipment

Condition: good (used), Type Rt 500 G Number 4021 Design: • Clamping surface D = 500 mm • Weight approx. 195 kg Dimensions approx. 700 x 600 x 170 mm Hedpfxsxn Tv Ej Afienu

Condition: good (used), Approx. 24 table trolleys – used – : Unit price ex location: €69 (net, excluding VAT)! Minimum purchase: 3 units = 1 pallet Manufacturer: unknown (to be provided) Model: unknown (to be provided) Hodpfx Ajw Db Scofionu Year of manufacture: unknown (to be provided) Dimensions: unknown (to be provided) Width estimated at 40–50 cm, length estimated at 0.70 m Load capacity: unknown (to be provided) Condition: good – very good Available: immediately Location: Rhine/Main area, later warehouse in Frankenberg / Saxony

Condition: not inspected (used), for fast, exact cross-cutting of several timbers at the same time, which can be placed next to and/or on top of each other, max. travel approx. 3.3 m, total table length approx. 4.15 m, total table width approx. 0.85 m, max. clamping height approx. 160 mm, max. timber width approx. 220 mm, positioning drive with 2 electric disc brakes, positioning slide can be swivelled upwards, with 2 pneumatic clamping tongs with 4 spring-loaded clamping fingers each from above, 10 clamping tines from below, for self-assembly on a cross-cut saw Hnjdjiqn D Dspfx Afiju

Condition: used, machine/vehicle number: 007275, Max. panel width: 800 mm Hsdot H Tvvepfx Afisnu Max. panel length: 2500 mm Max. panel stack height from the ground: 1650 mm Lifting capacity: 4500 Kg

Condition: ready for operation (used), Year of construction: 1992, functionality: fully functional, rotational speed (max.): 1,250 rpm, travel distance X-axis: 850 mm, travel distance Y-axis: 1,000 mm, travel distance Z-axis: 700 mm, controller model: Heidenhain 426, TECHNICAL DETAILS X-axis travel: 850 mm Y-axis travel: 1,000 mm Hnjdpexn I U Njfx Afiju Z-axis travel: 700 mm Tool holder: SK 40 Spindle speed: 15 - 1,250 rpm Spindle quill: 75 mm MACHINE DETAILS Control: Heidenhain 426

Condition: new, Year of construction: 2022, AVAILABLE FROM STOCK : Geka plasma cutting machine GCS P-4020 table size 4000 x 2000mm incl. plasma source Hypertherm 125A incl. PRONEST HYPETHERM NESTING SOFTWARE - GEKA CNC cutting table - Hypertherm Powermax 125A - cutting capacity: steel 25mm, stainless steel 20mm, aluminium 12mm - CNC control with GproCUT 2D CAD cutting software - Nesting included. - Country of manufacture Spain incl. CE conformity. - Heavy duty base for increased support and rigidity. - CNC Tex computer control with touch screen. - Linear guides on all axes for high repeatability. - Safety cutting head to prevent damage to the cutting head. - Rack and pinion gearbox with 70kg/cm servo motors. - Fully enclosed cable drag to protect cables from damage. - Movement speed 40 meters/min. - Resolution 0.01mm. - Optional automatic lubrication on all axes. - Optional, separate suction chambers in the machine bed. - Z-axis with integrated THC (Torch Height Control) to ensure automatic cutting distance between torch and material during the entire cutting process. - Torch anti-collision system (machine stops before any collision). - Laser pointer to check X and Y axes for zero reference. - The effective cutting area for P-4020 is 4000 x 2000mm. - Portal height Z = 100 mm. - Table with compartements for aspiration Hnjdegypclepfx Afiju

Condition: good (used), Year of construction: 2014, For sale are 2 identical injection molding machines of the company Netstal and the type SynErgy 2000-230/110 The machines were in production until the last day The company from which these machines originate attaches great importance to maintenance and servicing, which is why the machines are in very good condition 2 K function Turntable Designation Netsal SynErgy 2000 Clamping force in kN 2000 Machine drive power in kw 45 Year of construction 2014 Operating hours 20209 Weight 13300kg Length 6901mm Width 2075mm Height 2240mm plus 800mm flow box Cylinder size AG1 20mm Cylinder sizeAG2 16mm _____ Designation Flow Box Type LMP 105 Manufacturer Max Petek Serial number S 140743 Year of manufacture 2014 _____ Can be purchased additionally: Krauss - Maffei MH 50 robot Hodjkwb Diepfx Afienu Designation 6 -axis: Yaskawa Type: DX 100 Operating hours approx. 8900 Year of construction 2014 The systems can be purchased complete or in individual parts Prices plus value added tax Viewing possible by appointment. Contact us, our team will be happy to help you. Trade-in or exchange possible! Machines purchase / sale PURCHASE / SALE OF PRODUCTION & METALWORKING MACHINES AND MUCH MORE. Do you need a high-quality but inexpensive metalworking machine for your production? Or do you want to sell yours? For further information or contact options, please visit our website

Condition: good (used), 1 fired clamping table 600 x 600 mm Hnjdpfx Aod Tk A Sefiou

Condition: good (used), Year of construction: 2012, For sale are 2 identical injection molding machines of the company Netstal and the type SynErgy 2000-230/110 Hsdpokv Uq Iofx Afienu The machines were in production until the last day The company from which these machines originate attaches great importance to maintenance and servicing, which is why the machines are in very good condition 2 K function Turntable Designation Netsal SynErgy 2000 Year of construction 2012 Operating hours 28828 Weight 13300kg Clamping force in kN 2000 Injection unit 230 Machine drive 45 kW drive power Length 6901mm Width 2075mm Height 2240mm Cylinder size AG1 20mm / 32mm Available Cylinder sizeAG2 25mm / 32mm Available ____ Handling Wittmann, can be purchased additionally Serial number W833PRO - 0284 Operating hours approx. 13000h Year of construction 2016 Outfeed conveyor at the bottom Width 400mm Length 2300mm The systems can be purchased complete or in individual parts Machines already dismantled Prices plus VAT Viewing possible by appointment. Contact us, our team will be happy to help you. Trade-in or exchange possible! Machines purchase / sale PURCHASE / SALE OF PRODUCTION & METALWORKING MACHINES AND MUCH MORE. Do you need a high-quality but inexpensive metalworking machine for your production? Or do you want to sell yours? For further information or contact options, please visit our website

Condition: like new (used), 1 used press table in very good conditionDimensions: 500 x 380 mm Hsdped Tmfmsfx Afionu