Used Swiss Speedy for sale (510)

Condition: excellent (used), Year of construction: 2014, functionality: fully functional, total length: 69,000 mm, total width: 16,000 mm, total height: 16,000 mm, The system was designed and dimensioned according to Eurocode EN 1993 for the industrial drying of wood chips, sawdust, or similar biomass products and is suitable for use in biomass, wood, or pellet production. Process components: Air heater, deflection rollers, feeding modules, discharge modules, trough chain conveyor, belt tensioning and adjustment device, 7 exhaust stacks (height up to approx. 17.6 m) Csdjzw Apgopfx Aiieri Designed for hot air or waste heat utilization (e.g., biomass boiler or CHP plant), heat requirement 10,270 kW thermal, installed electrical power 690 kW electrical. The inlet temperature in the dryer is 68°C, the outlet temperature is 42°C, and the heat transfer medium is a water/glycol mixture. The volume flow rate at the dryer outlet is 1,081,000 m³/h. Dust emission value 5 mg/Nm³ (moist), sound pressure at a distance of 1 m 85 dB(A) from the outlet of the discharge duct and the dryer. The dryer is designed for an ambient temperature of up to -40°C; the conveying capacity is at least 70 m³/h and a maximum of 250 m³/h with a bulk density of 260 kg/m³. The furnace is NOT included in the offer; we only sell the belt dryer! The working level of the dryer is supported by steel columns approximately 8.00 m high and is enclosed with thermally insulating sandwich panels. A hall or other production components can be placed under and between the columns (see documents, steel structure). The system has been disassembled and stored by an experienced assembly team; this team can be arranged for transport and reassembly. Please note: We only sell this belt dryer without a furnace and no other parts! Please send your inquiries via WhatsApp to Mr. Sörgel; he is on-site at the factory and may not always be available by phone. Thank you very much!

Year of construction: 2000, condition: excellent (used), Max. batch weight: 3 kg Drum volume: 2.5 l Motor power: 0.18 kW The centrifuge was used for the recovery and separation of precious metal shavings (gold, silver, platinum). Csdj Ahwl Espfx Aiieri The condition is very good.

Condition: used, Year of construction: 2022, functionality: fully functional, tooth pitch: 100 mm, grinding wheel diameter: 125 mm, grinding wheel bore: 20 mm, We offer this used Iseli Swiss BNF 100, a fully automatic 4-axis surface grinding machine, manufactured in 2022. Manufacturer: Iseli Swiss Model: Fully automatic 4-axis controlled flank grinding machine for band saws in wet grinding version / Type BNF100 Cedpfoz E Spcox Aiieri Year of manufacture: 2022 • Flank grinding machine for set, as well as stellite and carbide-tipped band saws • Full enclosure with intensive water cooling • Equipped with a 4-axis CNC control system • Each movement is individually controlled via servo motors, resulting in minimal idle times • The advanced saw tooth can be finished in a clamped position • Electrically controlled, central saw blade height adjustment • Height stop for precise saw blade positioning • Use of roller linear guides for the CNC axes (stiffer machine construction and significantly increased service life) • Pneumatic saw blade clamping • Pneumatic additional clamping to stabilize thin saw teeth, resulting in increased dimensional accuracy • Operation via touch screen / color display • Data can be retrieved via the control system (standard storage space for 99,999 data sets) • Metric or Anglo-American measurement system selectable (mm or inches) + Dust extraction and auxiliary feed Technical data BNF100 Flank clearance angle: 0 - 7° Tooth pitch: 13 - 100 mm Blade width standard: 75 - 360 mm Blade width optional: 25 - 360 mm Blade length standard: from 5,300 mm Blade length optional: from 4,300 mm Grinding wheel variant 1: Ø 100 - 125 mm Grinding wheel variant 2: Ø 75 - 100 mm Grinding wheel bore: Ø 20 mm If you have any questions or need more information, please send us a message or call us.

Condition: ready for operation (used), Year of construction: 2012, functionality: fully functional, CNC-controlled flank grinding machine for band saws • Grinding mist extraction fully integrated into the base machine • Equipped with a 4-axis CNC control system • Each movement can be controlled individually via stepper motors, resulting in minimal idle times • The clearly arranged display also serves as an operating element via a touchscreen • The advanced saw tooth can be finished-ground multiple times in one position • Pneumatic additional clamping device for stabilizing thin saw teeth, thereby increasing dimensional accuracy • Powerful coolant system with full enclosure • With a special program (option), variable tooth widths, tooth pitches, and tooth heights can be ground * Feed from the left Technical data: • Tooth pitch: 15 - 100 mm • Flank clearance angle: 0° - 7° • Blade width: 75 - 360 mm • Blade length: from 5.3 m • Cup grinding wheel diameter: 75 or 100 mm • Bore diameter: 20 mm Blade height measuring device for band saws and ripsaws Safety package for cleaning system with flow monitor and pneumatic valve Machine-side connection to cleaning system for ISELI machines bc130, bc240, bc325, em300 Yellow signal lamp Grinding programs / software licenses Program for variable tooth pitches. The tooth pitch is entered on the machine's touchscreen Crodsz Hdpwopfx Aiioi Setup of band saws 1 set of lateral and rear blade supports, setup for narrow band saws with eccentric clamping from 25mm, vernier adjustment for the flank angle adjustments on the tooth back and tooth face, pneumatic additional clamping device for cup grinding wheels with diameters of 75 mm + 100 mm Flank grinding with radius, flank measuring device for protrusion and cutting gap.

Condition: used, Year of construction: 2007, functionality: fully functional, machine/vehicle number: 07-02461, measuring range X-axis: 250 mm, measuring range Z-axis: 310 mm, total width: 390 mm, total length: 430 mm, total height: 805 mm, input voltage: 230 V, overall weight: 80 kg, input frequency: 50 Hz, For sale is a tool presetting machine from the Swiss quality brand PWB Swiss. The machine is in used condition, but the optics and measuring electronics are functioning. Extensive VDI accessory package included: Cjdpfjzy Uqhjx Aiisri The machine is sold with a used set of reduction adapters (ideal for CNC turning operations): 1x VDI 30 holder 2x VDI 20 holder (in two different heights) 1x VDI 16 holder Technical data: Measuring range X-axis (longitudinal travel): 250 mm Measuring range Z-axis (vertical travel): 310 mm Base spindle holder: SK 40 Weight: approx. 80 kg Important notes regarding the sale: A test protocol or printed manual are no longer available. The machine is sold in its current condition as inspected (uncleaned). An on-site inspection while the machine is powered on is highly recommended. Sales conditions: Price: €1,337 (negotiable, plus VAT) Invoice: A proper invoice with VAT will be issued. Shipping: Self-collection only. Assistance can be provided with loading.

Condition: ready for operation (used), Year of construction: 2001, This SWISS CAB KMV was manufactured in 2001. It is a pipe extruder designed for plastic-metal composite pipe systems. More technical details will follow soon. Consider the opportunity to buy this SWISS CAB KMV pipe extruder. Contact us for more information. Cedpfxe Agt U To Aiiori • Plastic-metal composite pipe system • Control: iNOEX aurex ERS 36 • Pipe diameter 14, 16, 18, 20 mm • Material LDPE-MDPE-HDPE, silane-crosslinkable PE • Diffusion barrier aluminium thickness 0.15 - 0.4 mm • Line speed max. 40 m/min. • Axle height 1000 mm

Condition: excellent (used), Year of construction: 2010, operating hours: 5,285 h, functionality: fully functional, input voltage: 230 V, type of input current: AC, laser power: 105 W, type of cooling: air, total width: 1,240 mm, total height: 1,140 mm, total length: 1,920 mm, overall weight: 580 kg, travel distance X-axis: 1,245 mm, travel distance Y-axis: 710 mm, travel distance Z-axis: 610 mm, input current: 20 A, laser wavelength: 10,600 nm, input frequency: 50 Hz, Speedy 500 in good condition, coming from a model-making workshop. Few operating hours (5285 hours). Laser source replaced in late 2018 (Synrad firestar ti100; nominal 100 W, 151 W as a new part; 2392 hours of operating time). Power supply also replaced in 2018 (Meanwell RSP-2400). Last service: 08/2026 Extensive accessories included: Laser pointer for precise alignment of the workpiece 5.0" lens 2.0" lens Pass-through – for processing longer sheets Gas kit Cutting table Crsdpfx Asz Eh Eaeiiei Vacuum table Honeycomb table / aluminum honeycomb core for vacuum table Rotary engraving attachment – for bottles, glasses, etc. iCut software and camera (currently disassembled) Includes Mistral ECO 220V / 50HZ extraction system (motor relatively new). Original new price: €86,708.58

Year of construction: 2008, condition: good (used), functionality: fully functional, machine/vehicle number: S2926SMA0099.10801, Laminator from the Swiss company 3S ( Swiss Solar Systems ). Data available in photos. Cedpfx Aievad Imoijri

Condition: used, Year of construction: 2021, Laser power: 45W, laser wavelength: 10.6µm, supply voltage: 230V, frequency: 50/60Hz. Including Aigner/Trotec Atmos Cube Speedy extraction system, year of manufacture: 2021, airflow rate: 320m³/h, negative pressure: 8500Pa, power consumption: 1.2kW, operating hours of the extraction system according to the display: approx. 296h, as well as additional accessories. The machine is in excellent condition and has very few operating hours. Inspection possible by appointment. Crsdpfx Aie Ahi S Rjiji

Condition: used, Year of construction: 2019, machine/vehicle number: S4-3044, input voltage: 230 V, type of input current: AC, laser power: 120 W, type of cooling: air, total width: 1,428 mm, total height: 1,050 mm, total length: 952 mm, overall weight: 300 kg, laser wavelength: 10,600 nm, input frequency: 50 Hz, For sale is a used, professional Trotec Speedy 400 CO₂ laser engraving and cutting machine, manufactured in May 2019. The machine is in used condition, commensurate with its age and previous use. Technical data: Manufacturer: Trotec Laser GmbH, Austria Model: Speedy 400 Year of manufacture: May 2019 Serial number: S4-3044 Laser type: CO₂ laser Maximum laser power according to the nameplate: 120 W Working area, typical for the model: approx. 1,016 × 610 mm Power connection: 230 V / 50–60 Hz Cedpe Adrb Njfx Aiieri Rated power consumption: 1.9 kW Known operating condition: The machine could be switched on and operated via the integrated control panel. The following functions could be checked: The X and Y axes of the laser head can be moved via the control panel. The height-adjustable work table can be moved via the control panel. The axes and the table could be moved to various positions. The red pilot/positioning laser is visible. The operating and control indicators are active. Important note regarding the laser: The actual condition of the CO₂ laser source is unknown. The operating hours and the remaining available laser power are unknown. A complete engraving or cutting test has not been performed. Scope of supply: The offer includes the Trotec Speedy 400 shown in the pictures, with the existing work table, laser head, and control panel. A separate extraction system, a control PC, and software licenses are not included in the offer.

Condition: good (used), Year of construction: 1992, For sale is a fully functional, robust agricultural drying line that was recently used successfully for the efficient drying of sawdust. The system is ideally suited for sawmills, pellet and biomass producers, or agricultural service providers. Versatile application: Optimized for sawdust and wood flour, also suitable for straw, grain legumes, or specialty crops. Reliable technology: Solid machine construction quality, designed for continuous operation and high throughput. Energy-efficient: Well-designed airflow for optimized heat consumption. Condition & availability: The system is in well-maintained, operational condition and can be inspected while powered on after prior arrangement. Crsdpfx Asz I Efpsiiei

Condition: like new (used), functionality: fully functional, Year of construction: 2026, operating hours: 18 h, actuation type: electric, controller manufacturer: Trotec, laser type: CO₂ laser, laser source manufacturer: Trotec, laser hours: 10 h, laser power: 120 W, laser wavelength: 10,600 nm, working length: 1,016 mm, working width: 610 mm, working height: 305 mm, feed rate X-axis: 259 m/min, feed rate Y-axis: 259 m/min, input voltage: 230 V, input frequency: 50 Hz, type of input current: AC, type of cooling: air, warranty duration: 24 months, Equipment: CE marking, emergency stop, We are offering this almost new Trotec Speedy 400 engraving and cutting machine with a factory warranty. It is stored in an adequately dust-free environment with the correct temperature and humidity. Machine data as of 01-10-2026: - Total machine operating time: 18 hours and 8 minutes - Total laser source operating time: 9 hours and 21 minutes - Total registered travel distance: 241,066 meters Model: Speedy 400 Manufactured: March 2026 Country of origin: Austria Supply voltage: 230 V AC Frequency: 50/60 Hz Rated power: 2100 W Wiring diagram: 8086_Speedy400_wiring Laser type: CO₂ Laser power: 120 W New price: € 76,040 If you have any questions or would like more information, please send a message or call. The pickup date will be determined in consultation. Cjdpfx Aez Il Aujiiori 2 industrial fans for air extraction can also be included.

Year of construction: 2013, operating hours: 5,200 h, condition: excellent (used), functionality: fully functional, We offer this very good Comandulli SPEEDY SYSTEM D8 automatic stone edge polishing machine, year of construction 2013. Manufacturer: Comandulli Model: SPEEDY SYSTEM D8 Year of construction: 2013 Crsdpoycxyaefx Aiisi Condition: very good If you have any questions or need more information, feel free to send us a message or give us a call.

Condition: excellent (used), Year of construction: 2020, functionality: fully functional, overall weight: 30 kg, Factory liquidation for mask production. Installed in 2021, out of operation since March 2022. The equipment has already been dismantled and is ready for delivery. Cjdpfx Ajxqghtsiijri Stationary industrial vacuum cleaner Power: 2.2 kW Airflow: 300 m³/min Suction connection: 40/50 mm Weight: 30 kg

Condition: like new (used), Year of construction: 2020, functionality: fully functional, machine/vehicle number: S36-1969, laser power: 60 W, type of cooling: air, total width: 830 mm, total height: 1,055 mm, total length: 1,221 mm, overall weight: 300 kg, We present the Trotec Speedy 360 CO2 laser with a power output of 60 watts, manufactured in October 2020. Equipped with Sonar autofocus technology, this laser is ready for immediate use and is fully functional. The scope of delivery includes: - Trotec Speedy 360 60-watt air-cooled laser and Atmos Duo plus HEPA 230V - Laptop including Win10 and CorelDraw - Aluminum grid cutting table - with pump for air supply - Rulers in mm - with masking tape - Extraction nozzle 75mm - Connection cable Technical data: - Working area: 813 mm x 508 mm - Dimensions: 1221 x 830 x 1055 mm - Laser power: CO2 60 watts - Laser source: CO2 laser, digitally controlled, air-cooled - Air assist: Improves cutting results by blowing away heat and gases - Movable starting point: Enables precise selection of the starting position for laser engraving/laser cutting - Resolution: User-selectable from 100 to 1000 dpi - Connection: USB interface Codpfxozzkg Ie Aiisri

Condition: good (used), Year of construction: 2022, operating hours: 1,700 h, functionality: fully functional, laser power: 45 W, - Manufacturer: Trotec - Model: Speedy100c-8063 - Year of manufacture: August 2022 - Serial number: S1-7145 - 45 Watt CO2 - 230 V - 50 Hz - with autofocus - with air assist - with 2.0" lens - with cutting table 12.7 mm - with Performance Upgrade - with X-axis with 2 carriages - Scales in mm including: - Extraction unit - Manufacturer: Aigner/Trotec Crsdeygl Nvjpfx Aiiei - Model: 8401 Atmos Cube Speedy 230 V - Serial number: 01732-18928 - Extraction connection cable Additionally available: Large lot of engraved parts made of wood, plastic, etc. Various shapes/motifs Shipping possible on request. Sale to commercial customers only.

Condition: used, mileage: 705,000 km, power: 92 kW (125.09 HP), first registration: 03/1970, fuel type: diesel, number of seats: 34, color: yellow, Year of construction: 1969, Former Swiss Postbus for sale. Vehicle: Saurer L4C, left-hand drive. One of the last bonnet-type buses built on a Saurer chassis. Body built by Ramseier + Jenzer. Credpfxj Aia Dyo Aiiei They completely restored the vehicle in 1991 (factory restoration). The vehicle was owned by the previous owner for 40 years. Impeccably maintained and ready for immediate use. 125 hp, 4-speed gearbox + overdrive, power steering, pneumatic door at the front and rear, length 10,005 mm, height 2,980 mm, width 2,300 mm, 33 passenger seats + driver, 2 roof hatches, radio with microphone. €75,000.00 Net export possible. We offer worldwide shipping.

Condition: refurbished (used), Year of construction: 2016, functionality: fully functional, machine/vehicle number: S36-0330, laser power: 80 W, Trotec Speedy 360 – CO₂ laser with a brand-new laser tube, fully serviced Invest instead of repairing – this Trotec Speedy 360 is ready for immediate use and impresses with its exceptionally well-maintained condition and a newly installed laser tube. For sale is a Trotec Speedy 360 CO₂ laser engraving and cutting system, which has only been used in a professional setting and has always been carefully maintained. The machine is in very good condition, both technically and visually, and is immediately available for productive use. A new laser tube was installed before the sale. This means you not only get a proven industrial laser but also benefit from one of the most valuable wear parts in new condition. This significantly reduces the investment risk and enables a direct start to production without additional follow-up costs. Proven Trotec quality The Speedy 360 has been one of the most powerful and reliable CO₂ laser systems in its class for years. Its high processing speed, precise positioning, and excellent repeatability make it the first choice for professional users in industry, crafts, and advertising technology. Whether for individual production or series production – the Speedy 360 consistently delivers precise results. Versatile applications The machine is suitable, among other things, for processing: ✔ Acrylic ✔ Wood and plywood ✔ MDF ✔ Leather ✔ Paper and cardboard ✔ Rubber ✔ Textiles ✔ Plastics ✔ Glass (engraving) ✔ Coated metals (marking) This makes the laser ideal for companies in the fields of advertising technology, sign manufacturing, model making, personalization, industrial marking, or prototype construction. Crsdpfxjzlb Abj Aiiei Your advantages at a glance ✔ New laser tube – ready for immediate use ✔ Very well-maintained overall condition ✔ Precise engraving and cutting quality ✔ High working speed ✔ Proven Trotec technology ✔ Easy operation with JobControl ✔ Reliable industrial machine with high value retention Inspection is highly recommended We invite you to personally inspect the excellent condition of the machine. An inspection and a test run can be arranged at any time by appointment.

Condition: used, Year of construction: 2003, CITIZEN L5 20 with bar feeder, year 2003. Credozp Eaxspfx Aiioi

Year of construction: 1998, condition: ready for operation (used), A glass bottle washing machine PAC Swiss is available. Washing capacity: 7500bottles/h, cycle time: 6.72s, throughput time: approx. 12min, bottle types: Euro/NRW/Ale, bottles per row: 14, max. bottles in the machine: 1456, bottle volume: 330ml/500ml, process: preheating/caustic treatment/recooling/spraying, machine dimensions X/Y/Z: approx. 7050mm/1800mm/2300mm, operating hours: approx. 14175h. Documentation available. On-site inspection is possible. Crodpsyhgniefx Aiioi

Year of construction: 2023, condition: excellent (used), functionality: fully functional, The 2023 Nilma Speedy Cutter is a reliable piece of equipment designed for efficient slicing and dicing in various food processing environments. This used model retains its robust functionality, making it a cost-effective choice for kitchens seeking high performance without the expense of brand-new machinery. Engineered with precision, the Speedy Cutter offers consistent and uniform results, catering to a range of fruits, vegetables, and other ingredients. Its intuitive controls and easy-to-clean components ensure smooth operation and maintenance, optimizing productivity. Csdpoztxy Tefx Aiisri Built to Nilma’s high standards, the Speedy Cutter embodies durability and practicality. This cutter is an excellent choice for anyone in need of dependable equipment that can significantly enhance food preparation processes.

Condition: used, Year of construction: 2005, CITIZEN K16 VIIP Cedpfxezp Ecas Aiiori Year 2005 with bar feeder

Condition: good (used), Welded frame, used Manufacturer: CREA-SWISS Technical Data Brand: CREA-SWISS Max. frame size: 3,000 x 2,400 mm Min. frame size: 470 x 610 mm Profile height: up to 115 mm Height tolerance compensation: from -1 mm to +1 mm Dimensions: L 3.6 x W 1.5 x H 2.0 m Weight: 280 kg Advantages - Single-operator device: set external dimensions, insert profiles, adjust height differences, and weld completely on both sides, all by one person - Precise adjustment for accurate frame construction - Rotatable around the longitudinal axis - Fully welded in a single clamping - Fine adjustment of miter edges - Mobile workstation on castors - Suitable for all types of frames (steel windows, fire doors, or angle steel frames) All information provided without guarantee. A demonstration is possible at any time in our showroom. Crsdpfsy At A Djx Aiisi

Condition: like new (used), Year of construction: 2022, functionality: fully functional, laser power: 80 W, overall weight: 180 kg, Trotec Speedy 300 CO2 Laser, Berlin, 80W, built in 2022/8, almost like new! Ready for demonstration in Berlin-Charlottenburg! I acquired this machine through an auction last year and picked it up directly from the original owner in the Netherlands. However, contrary to my plans, I don't need the machine and would like to sell it. See photos for a copy of the invoice. It is in excellent condition and has been used very little. I am offering this hardly used, only 3.5 years old, regularly maintained, professional Trotec Speedy 300 CO2 laser, made in Austria, for demanding users. The machine comes from a small startup whose business idea quickly proved unsuccessful, which is why it ended up in the auction, where I acquired it and picked it up directly from the previous owner. A machine with such a rare history is a rare find and will be to your advantage. This machine is still young. The fact that the machine is hardly used is also evident in the fact that the interior is white and almost without any smoke residue; only the grid is moderately smoked, but not black. The machine is ready for demonstration in Berlin. A workhorse with a very long lifespan. Equipped with a CO2-RF tube. The laser has a power of 80 watts. Due to its hardly used condition, this machine is a real alternative to buying a new one, with relatively low capital investment. Year of manufacture: August 2022 Location: Berlin City Working area: 726 x 432 mm Width x Depth x Height: 1130 x 943 x 609 mm Weight approx. 150 kg Width x Depth x Height (with base frame): 1130 x 943 x 1075 mm Weight (with base frame) approx. 185 kg For transport, the laser can be rolled directly onto a truck with a loading platform at ground level! The scope of delivery includes a Trotec Atmos Pure 300 extraction system. "Trotec's latest extraction filter, ideal for Speedy 300s." The operating hours of the laser source are currently displayed as 12 hours in the Ruby software. According to Trotec, however, this number cannot be considered binding and therefore cannot be regarded as confirmed. However, the optical condition and the statements of the original owner suggest that the machine has been used very little. The buttons on the control panel are still completely matte, as you would expect from new devices; otherwise, the laser looks largely like new, and you will hardly find a better one on the used market. The Ruby software is included with the machine. Crsdpfx Ajz Sfqpoiiei

Year of construction: 2003, condition: used, Max. bar capacity: 13mm, max. turning length: 130mm, connected load: 18kW, control system: TRAUB SYSTEM TX8i-s, including FMB Minimag 3200 bar feeder. Machine is fully functional, no known technical defects. An on-site inspection is possible. Code Ahq Raepfx Aiiori