Used Susemihl Gmbh Maschinenfabrik for sale (68,427)

Condition: good (used), Converter, power supply, power supply unit -Manufacturer: NorthTec GmbH -Type: VCC 3 -Number: 1x available -Price: per piece -Dimensions: 440/255/H135 mm -Weight: 3.1 kg/piece Ibsdpfxjffwpae Ahyec

Year of construction: 2026, condition: new, Silicone Membrane sheet for Membrane press, Silikon Membrane für Membranpressen ,Natural rubber Membran MEMBRANE for membrane presses - silicone or natural rubber Highest quality and suitable for every membrane press (foil and veneer presses). You can obtain our membranes cut to the required size or as rolls from us. In the field of 3D Thermoforming, we also offer presses, foil trimming solutions , film storage paternoster, and brushing machines! MEMBRANES for membrane presses Silicone and Natural rubber The highest quality silicone and natural rubber membranes for each type of membrane press (foil and veneer). POSSIBLITIES FOR DELIVERY: The membranes can be cut to you size or delivered in a 36m roll. SILICONE Type: SM1 -3mm Colour: milky translucent Surface: both sides smooth width (standard): 1700 or 1800 mm polymer type: Silicone hardness: 50° Shore thickness: 3 mm temperature range: min. -50°C/max.230°C Ijdpfeff Agijx Ahyjbc SILICONE Type: SM1 -2mm Colour: milky translucent Surface: smooth width (standard): 1600/1800 mm polymer type: Silicone hardness: 45° +/- 3 Shore thickness: 2 mm temperature range: min. - 60 °C/max. +230°C NATURAL RUBBER Type: RM-2 Colour: grey Surface: smooth/smooth smooth/textured width (standard): 1700 and 2000 mm +/- 5mm rubber: Natural rubber hardness: 42°Shore thickness: 1,8, 2.5 and 4.0 temperature range: min. - 20 °/max. +130°C

Condition: new, Year of construction: 2026, Equipment: safety light barrier, 1A Gmatick Storage Paternoster (roll rack) The foil storage Paternoster foils is suitable to use for the storage of all 3D-films, it is used as a high storage at the membrane press or as a space-saving storage solution for the 3D foils. With our Paternoster you can storage on very small area approximately 2, 4m x 1, 2m a lot of film rolls (up to 32 rolls of a Ø 300 mm). The required film is thus immediately available at the push of button. Our Paternoster are available from 2.8 m up to 6, 0 m as standard Paternoster. Also special solutions are offered by us, please contact us, we will then find the right solution for your storage. As additional equipment we offer center sleeves, a manual cutting station or the full automatic cutting device and we have also ionization solutions available at Gmatick. • Storage rods ø 42.4 mm • Sleeves inside Ø max. 82 mm,. • Load chain as a hollow pin chain with a breaking load of 100 kN, • Chain pitch is 50 mm hole to hole and this is the raster for the positioning of the mounting foil bars. Ibodpoff Huwefx Ahysc • Control with a key switch (dead man) for on / off • Rotational speed of the chain is approx. 5.5 m / min • Voltage 400 V, 3N; 50/60 Hz or as USA Version 480V 60Hz • Mains cable with CEKON plug 16A fuse protection (by the customer) 10A slow blow • ground load data at least 2, 2 kg / cm² • Side covering over the entire height of the Paternoster, guards from 2, 2 m above floor to top edge of the Paternoster. • Requirement for the installation of the Paternoster is a viable, flat and solid floor, • Floating floors you can’t install a Paternoster. It is forbidden

Condition: used, DHS 1-G / DHS1G, Feinmess Dresden GmbH Display Handling System SN:020702 Ijdpfjq S Tdgox Ahyebc Model: DHS1-G Condition: Used

Condition: as good as new (ex-display), Year of construction: 2025, operating hours: 500 h, functionality: fully functional, machine/vehicle number: 25-029, total width: 800 mm, total length: 4,700 mm, total height: 1,900 mm, type of input current: three-phase, energy consumption: 2 kWh, Very good metal separator (inductive sorter) for separation of all kinds of metal (incl. stainless steel). Can be used before ECS, behind or stand alone. Ejecting of all metals larger 0.5 / 1 mm possible. Reasonable using for material up to 60 % metal content. Unique flap technology, no pressured air necessary. Machine is ready for using, can be visited or tested. If wished can be equipped with camera. If the machine is too small we can build also bigger. It is our demonstration machine. Throughput / capacity depending on material and purpose. Price on negotiation! Ibsdjqabm Ejpfx Ahyec

Condition: good (used), Used, insulated stainless steel tank with agitator and double jacket Last use: Food Article number: 10340 Volume: Approx. 6300L Type: Standing on three legs Material (in contact with media): 1.4301 / AISI304 Design: Insulated with double jacket at the bottom Bottom: Flat bottom Top: Domed Operating pressure according to nameplate: ATM Tank dimensions: Tank diameter: 2030mm Cylindrical height: 2000mm Distance from outlet to bottom: 330mm Height of legs: 390mm Overall height: 2940mm Overall width: 2050mm Materials: Inside: 1.4301 / AISI 304 Outside: 1.4301 / AISI 304 Equipment: Domed lid Ø 490mm Outlet diameter: 40mm Ibodpfx Ajd Nap Rohysc Slow-speed agitator Cylinder insulated Bottom with double jacket

Condition: like new (used), Used heatable/coolable stainless steel container Type: STOC3300TPRW Item number: 10844 Volume: Approx. 3300 liters Type: Upright design on three height-adjustable feet Design: Single-walled with thermoplate Material (wetted parts): 1.4301 stainless steel (AISI304) Surface: Satin-finished outside, BA (IIId) inside Internal weld seams: Pickled, passivated and brushed Max. Operating pressure: Atmospheric Max. Operating pressure thermoplate: 1.8 bar Max. Operating temperature: 95°C Top plate: 15° conical bottom Bottom: conical bottom 15° with central outlet DN50 DIN11851 Tank dimensions: Tank diameter: 1600mm Cylinder height: 1500mm Total height: 2430mm Equipment: 1x Ø 500mm manhole cover with swivel bracket on the top, EPDM seal 1x ladder bracket 1x thermoplate on cylinder H=900mm on cylinder 1x agitator flange connection IEC250 Ibsdeuy Ribopfx Ahyoc 3x spherical caps / height-adjustable feet with foot plates 1x vent valve DN50 stainless steel unpressurized on the top plate 1x DN50 DIN11851 spigot outlet in the center of the underbody 1x DN50 DIN11851 spigot on the top shelf with blind cap 1x DN65 DIN11851 spigot on the top shelf with blind cap 1x type plate

Condition: new, The unit is new, complete including controls, diesel tank, exhaust and batteries. Iodpfxekh Hbpe Ahysbc Description Model: NWR35 Ricardo Motor Newpower generator generator set Continuous power: 24 kW / 30 kVA Maximum power: 26kW / 33kVA Engine : Kofo RIcardo N4100DS-30, 4 cylinder water-cooled Connection: circuit breaker Frequency : 50 Hz. Voltage: 400/230 V including mechanical speed control, AVR, battery charger, galvanized soundproofing, cooling water heater, Control unit: Comap AMF8, mains feed Dimensions: 2180x960x1260 mm Weight: approx. 900kg Diesel tank: 102 L. At 100% load: 7.15 L/h At 75% load : 5.8 L/h At 50% load : 3.7 L/h Mains monitoring, mains feed, soundproofed Ready for immediate use. Net price: €5,208, gross price: €6,197 additional costs 63A automatic switch: € 500 100A automatic switch: € 620 Shipment: - Worldwide transport including unloading is possible for an extra charge - In order to be able to quote an exact freight price, please send us a request with your data and your complete address -Available from April

Year of construction: 2026, condition: new, functionality: fully functional, overall weight: 120 kg, total length: 900 mm, total width: 1,550 mm, total height: 2,050 mm, input frequency: 50 Hz, laser power: 30 W, laser wavelength: 1,064 nm, type of cooling: air, type of input current: AC, laser type: fiber laser, The universal laser marking system LAS 28 XLe from Systemtechnik Hölzer GmbH can be used for a very wide range of marking applications. With the integrated fiber laser you can mark almost all materials such as steel, carbide, aluminum and plastics. Depending on the requirements, the system can be equipped with a 20, 30 or 50 watt fiber laser. For permanent marking, the use of the laser is necessary in many industries. With the powerful laser software, texts, numbers, 2D codes, QR codes and logos can be realized with just a few clicks without extensive programming knowledge. Serial and article numbers are automatically incremented by the software after prior setting. In addition, the software can read data (variable information such as drawing numbers, project designations, etc.) from existing tables and automatically transfer them to predefined areas. The use of a hand scanner is also possible. The standard equipment includes an integrated PC with Windows operating system and laser software. Optionally, the laser model LAS 28 XLe can be equipped with a rotary axis (3-jaw chuck) for marking cylindrical parts. Further options, such as lateral extension arms for marking long parts, movable Z-axis, drawer systems, etc., can be realized. Made in Germany Fiber laser 30W, 20 W or 50 Watt - Laser class 1 - Wavelength 1064nm - Marking field size 150x150mm (optionally larger) - marking software EZCAD in German / English - optional: rotary axis (3-jaw chuck) - optional: digital height measuring system - optional: exhaust system (incl. activated carbon filter) - pilot laser (simple preview, contour preview) - focus finder (simple focus adjustment) - signal light for indication of operating status - max. component height approx. 300mm Ijdpfx Ahszntfmjyebc - electrically adjustable Z-axis - Integrated PC with Windows operating system - frame made of aluminum profile - air cooled - Door width approx. 700mm / door height(pass-through): 400mm - Connection 230V - Dimensions: approx. 900 x 800 x 1900 mm (LxWxH) - Weight: approx. 100 Kg

Condition: refurbished (used), Year of construction: 2013, functionality: fully functional, PAGO System L600 Pharmaceutical Labeling Machine | Extensively modernized | GMP | Immediately available Manufacturer: PAGO Etikettiersysteme GmbH (Fuji Seal) Model: System L600 Year of manufacture: 2013 For sale is a high-quality PAGO System L600 labeling machine for the pharmaceutical industry. The machine is suitable for labeling vials, injection bottles, and other cylindrical containers in a GMP environment. The machine was already upgraded and modernized at the factory in 2018 to handle additional product formats. Iodpfxjzpzbfj Ahyjbc In 2022, we purchased the machine used and immediately took it to the manufacturer, Fuji Seal / PAGO Germany. There, it was completely inspected, serviced, and extensively modernized. Investments of €60,200 were made in these measures. Before delivery, a complete Factory Acceptance Test (FAT) was carried out at the Fuji Seal factory. The machine is in very good technical condition and is ready for immediate use. Equipment Laetus/Keyence vision system for print and code inspection New Allen / Novexx thermal transfer printer Siemens PLC control Touchscreen operation Unwinding station Outfeed station Servo drives Stainless steel GMP design Complete protective enclosure Original documentation Technical data Output up to 120 products/min For vials and injection bottles GMP-compliant design Year of manufacture 2013 Manufacturer: PAGO Etikettiersysteme GmbH Why is the machine being sold? For our new pharmaceutical CMO plant, we have purchased two new labeling machines. Due to space limitations, this machine is no longer needed. Advantages Extensive modernization by Fuji Seal / PAGO Documented investment of €60,200 Factory upgrade already in 2018 Complete FAT at the manufacturer Very well-maintained condition Immediately available Significantly cheaper than a new machine A comparable PAGO/Fuji Seal pharmaceutical labeling machine costs over €450,000 in 2026, depending on the equipment and automation. Inspection is possible at any time by appointment. We will gladly send you further photos, videos, and technical documentation upon request.

Condition: ready for operation (used), Year of construction: 2000, There are 13 LTA Type IR dust extraction systems available. They are from various production years (1997-2001), but are all the same type. The systems will be dismantled in week 35 and will then be available for delivery. The ionizer and collector will be cleaned in an ultrasonic bath, and the housing will be wiped down. More systems will become available in the coming months. 20 x LTA AC3001 R, production years 2004-2011. Ibodjzv Ttaopfx Ahyoc

Condition: as good as new (ex-display), Gravity roller conveyor for pallets and metal boxes (3-lane),4.26 m, Brand new condition (without warranty) Manufacturer / System: ELD Raktártechnika Type: Gravity roller conveyor / gravity lane 3 item in stock Transportable unit: Pallet, metal box, storage container, and other custom loads Length: 4264 mm (Sections: A2 L=1768 mm + C L=2496 mm) Installation width (EL): 850 mm Usable width (CW): 810 – 812 mm Overall width: 930 mm Roller pitch: 78 mm Conveyor slope: 4% Load capacity (per unit): Minimum 120 kg when using brake rollers Maximum 720 kg (Max. weight ratio 1:4) Finish / Material: Galvanized and painted steel frame (Grey RAL 7005 / Yellow RAL 1021) Ibsdpfx Aozr Hv Tehysc Features: - Integrated brake rollers (with speed control against load acceleration) - 2 stop elements - Manually released intermediate stop (with yellow operating lever) - Entry guide plates (yellow) and side guide rollers - End stop Operating temperature: 0 – 45 °C (dry warehouse environment)

Year of construction: 2026, condition: new, functionality: fully functional, For sale: Skip container, 5.5 - 12 m³, crane container, waterproof, concrete container Product description: For sale is a skip container, 5.5 - 12 m³, crane container, waterproof, concrete container, manufactured according to DIN 30720-1, ideal for the transport and storage of waste, bulk materials, or industrial materials. The container is robust, safe, and ready for immediate use. Technical data: Standard: Technical description 30720-1 Crane container • Bottom: 6 mm S 355 • Sides: 4 mm S 355, 6 x 200 mm S355 • All sheets and profiles are welded • Corner reinforcements • Double-sided 3-point tilting bearing (bolt Ø45) x 2 • Stacking bar: 5 mm • Safety bar • Crane hooks x 4 • Frame edges: UNP 120/100 x 50 x 6 mm Isdezmqnvspfx Ahysbc • Information and warning stickers, white and red • The entire basic range of RAL colors is available • Inside and outside: zinc phosphate primer, outside coated with synthetic resin paint (80-100 μ) • Technical description 30720 -1, waterproof • Bottom: 6 mm S 355 • Sides: 4 mm S 355 • All sheets and profiles are welded • Corner reinforcements • Double-sided 3-point tilting bearing (bolt Ø45) x 2 • Stacking bar: 100 x 50 x 6 mm • Safety bar • Frame edges: U 100 x 50 x 4 mm • Information and warning stickers, white and red • The entire basic range of RAL colors is available • Inside and outside: zinc phosphate primer, outside coated with synthetic resin paint (80-100 μ) • Technical description • Bottom: 8 mm S 355 • Sides: 6 mm S 355 • All sheets and profiles are welded • Corner reinforcements • Double-sided 3-point tilting bearing (bolt Ø45) x 2 • Stacking bar: 100 x 100 x 10 mm • Frame edges: UNP 140/120 • Information and warning stickers, white and red • The entire basic range of RAL colors is available • Inside and outside: zinc phosphate primer, outside coated with synthetic resin paint (80-100 μ) Certificate: CE Warranty: 2 years Advantages: Robust construction for heavy materials Easy handling thanks to flap and stable hinges Stackable and transportable with tilting truck systems Weather-resistant thanks to corrosion-resistant coating

Condition: used, Year of construction: 2009, x-travel: 4000y-travel: 2000z-travel: 600messurements (LxWxH): 6.400 x 3.200 x 3.100weight approx.: 10.500 Control: Siemens PLC Touch Screen directly usable DXF files Outlet pressure: max. 5500 bar Abrasive conveyor system for water jet cutting systems - filling weight 350 kg OMAX vacuum sensor for monitoring the abrasive supply to the nozzle Pump pressure control sensor With water jet cutting, water is compressed at a pressure of up to 5500 bar. Depending on the requirements and the workpiece, this is then pressed through a nozzle with a diameter of 0.01 to 0.08 mm. Since water jet technology processes materials without heat input, there are no deformations. By adding an abrasive, water jet cutting enables maximum precision with tolerances of +/- 0.01 mm. Our flexible production allows vertical as well as diagonal cuts. We would be happy to receive your individual CAD data. The water jet technology offers great advantages for industry, trade and individual prototype production. Water cutting technology is also a plus point for the environment, as it works dust- and steam-free and also saves material. Waterjet Cutting: Example Gallery What sounds impressive in theory is even more impressive on the finished object. We have put together a selection of images to demonstrate our waterjet cutting capabilities. Click through the photos in the example gallery and get an impression of what is possible with this modern processing method. Waterjet will also find the right solution for your order! benefits No deformations in the cutting area Cutting without heat input Material saving High precision: +/- 0.1mm Cutting area: x = 3010 mm; y = 2010mm; Z=250mm Flexible manufacturing Vertical and oblique cuts Adoption of your CAD data formats: DXF, DWG, iges, stp, step, prt, jpt, jam Environmentally friendly, vapor and dust free Ibjdpfx Aewiatiohyoc We cut everything All materials brought into shape aluminum steel Brass Copper & Bronze Other precious metals Glass Granite & Marble tiles composites Promat cuts rubber plastics plexiglass Options: Oil cooler                                                         ¤ 10,725.00 Water filter system                                           ¤   1,430.00 Sludge suction system                                     ¤ 10,725.00 Professional water treatment system               ¤ 10,725.00 An oil cooler must be present when commissioning!!! So you can work longer than 1 hour. Extras: Including extra spare parts worth approx. 25.000¤ (see pictures)

Year of construction: 2018, condition: ready for operation (used), Suitable for grinding calcined coke, feed material diameter: 0-20mm, moisture feed material: under 0.1%, measurement: NEA Malvern analysis, with pendulum mill, automatic filling station, BigBag unloading station, dust filter, pipe chain conveyor, transition piece, metal separator, bunker, two-way distributor, dosing sluice, control cabinets, steel construction, documentation and additional elements, the system is still in its original packaging and has been stored for two years. Ibjdpfxonxk Ixs Ahysc

Condition: ready for operation (used), Year of construction: 2019, fting height: 3000mm, rated load capacity: 7t, load center: 600mm, weight: 11,29t, operating hours: approx. 3000h, with 360° rotator and air conditioning, the rear axle is defective (mounting pin and wheel hub). An on-site inspection is possible. Ijdpfx Aozuktbjhyobc

Condition: ready for operation (used), Year of construction: 2019, functionality: fully functional, machine/vehicle number: 1 790 58 450, turning length: 990 mm, turning diameter: 160 mm, spindle speed (max.): 4,500 rpm, spindle speed (min.): 1,500 rpm, travel distance X-axis: 280 mm, travel distance Z-axis: 2,400 mm, spindle motor power: 30,000 W, rapid traverse X-axis: 30 m/min, rapid traverse Z-axis: 100 m/min, rotational speed (min.): 1,500 rpm, rotational speed (max.): 4,500 rpm, total height: 2,950 mm, total length: 5,550 mm, total width: 2,550 mm, feed length X-axis: 280 mm, feed length Y-axis: 2,400 mm, feed rate X-axis: 30 m/min, feed rate Z-axis: 100 m/min, type of input current: three-phase, torque: 191 Nm, overall weight: 16,000 kg, chuck outer diameter: 215 mm, spindle nose: A6, mount diameter: 40 mm, Equipment: documentation/manual, rotational speed infinitely variable, Manufacturer: J.G. WEISSER SÖHNE GmbH & Co. KG Type: UNIVERTOR AS90/650RT General features: Iedpjvxf U Eefx Ahyebc Machine type: Horizontal shaft turning center with pick-up loading Area of application: Complete machining of shafts and rotationally symmetrical components Loading: Pick-up automation Processing types: Green turning, hard turning, roughing, finishing Tool carrier: 12-way turret with electric drive (VDI 40) Additional options: Driven tools, rotary turning, NC-adjustable steady rest, measuring probe Main spindle: Spindle bearing diameter: 90 mm Spindle flange: A6 according to DIN 55026 Drive power (100/40% ED): 18/23 kW or 23/30 kW Nominal speed: 1,500 rpm Maximum speed: 4,500 rpm Torque (100/40% duty cycle): 115/146 Nm or 151/191 Nm Travel paths & axes: Max. turning diameter: 160 mm Max. chuck diameter: 215 mm Center distance: Max. 990 mm Travel paths X/Z axis: 280 mm / 2,400 mm Max. feed force X/Z (40% duty cycle): 10 kN / 8 kN Max. travel speed X/Z: 30 m/min / 100 m/min Tailstock: Pressure force: 850 daN Centering center holder: MK4 Max. speed: 4,500 rpm Dimensions & weight: Machine dimensions (L×W×H): 5,550 × 2,550 × 2,950 mm Weight: 16,000 kg

Condition: used, Year of construction: 2010, Capacity: 18000 bottles/h closing heads: 24 pieces Isdpjvcqgbjfx Ahyjbc Power: approx. 5 kW Water: approx. 200 l/h Compressed air: approx. 2 cbm/h Length: 3,3 m Width: 2,2 m Height: 2,4 m Weight: 3000 kg Formats: 0,33 l; 0,5 l; max. bottle diameter 90 mm Running direction: right - left Material: Stainless steel, wear-resistant plastic Base construction: miniaturized, hygienic machine table in outward beveled design Features: mechanical / pneumatic control device (testing of bow clamping), central lubrication, height adjustment for processing of different bottle heights, rinsing and swelling device, high-pressure injection device, HDE injection nozzle at the discharge table, Discharge table, pusher station

Condition: used, Additional title: y. o. c.: mostly 2003 Finished wort: 150 hl Grist: 2500 kg Current: three-phase A.C. current Ibodpfx Ahovcqrweyoc Voltage: 400 V Frequency: 50 Hz Features: lauter tun, low pressure cooking wort copper-whirlpool system with external wort boiling system, additional whirlpool, trub collecting unit, hop dosage Periphery: lauter wort heater, vapor condenser

Year of construction: 1985, condition: used, Pressurised tank cellar with 4 upright 324 hl stainless steel pressure tanks and with double-seat valve solution on the operating level. The tanks are cooled using ice water. Additional title: 4 pressure tanks Diameter/tank: 2550 mm Total height/tank: 7360 mm Cooling surface/tank: 25 m² Perm. working overpressure: 3 bar Systemic volume: 324 hl Ijdpfxevcqyns Ahysbc Length: 12 m Width: 4 m Height: 7,5 m Weight: 2585 kg Material: stainless steel AISI 304 Features: Tank cleaning equipment with spray head, safety valve, pressure gauge, air valve combination; sampler, level indicator with valves, outlet valve Periphery: Inlet and outlet pipework via double-seat valves

Year of construction: 2003, condition: used, Additional title: brew vessel from stainless steel Total volume: 260 hl Diameter approx.: 3 m Diameter incl. insulation approx.: 3 m Frame height: approx.: 2 m Ibodpfxjvcqz Ee Ahyoc Width: 3,4 m Material: stainless steel 1.4301 Base construction: on stainless steel pipe supports, ground pegged Features: external boiler, conical hood stainless steel, D = 3200 mm), conical insulating hood (stainless steel outside diameter = 3400 mm), 2 outlets DN200 und DN100, manhole DN600, outlet vent (12000 mm), interior lighting

Condition: used, Year of construction: 2002, Additional title: crate packer Capacity for plastic crates: 500 cycles/h Power: 11 kW active power/ 15 kVA apparent power Voltage: 230/400 V ± 5 % Frequency: 50 Hz ± 2 % Length: 4170 mm Width: 2550 mm Height: 2650 mm Iedpjvcq Acofx Ahyebc Weight: 4300 kg Formats: Max. height: product: 360 mmm, plastic crate: 380 mm, cardbord box: 500 mm Features: 2 heads à 20/24 bottles, construction with T-flange table quick hitch, only work with glas bottles, incl. filled crate inspector, Krones Checkmat

Condition: like new (used), Year of construction: 2022, functionality: fully functional, machine/vehicle number: 106882-11, total length: 4,400 mm, total width: 1,700 mm, total height: 2,700 mm, overall weight: 7,000 kg, The drilling process of the deep hole drilling machine utilizes the single-lip drilling method. Drilling Unit Information: - Drilling depth: 200 mm - Min./max. drilling diameter: 1–12 mm based on ST 60 - Number of spindles: 2 - Spindle distance: 200 mm - Spindle drive: 2 x 2.4/4.2 kW - Infinitely variable spindle speed: 1,000–20,000 rpm - Infinitely variable feed rate: 10–25,000 mm/min - Rapid traverse: 25,000 mm/min - Slide travel (nominal): 650 mm - Slide width: 460 mm - X-axis slide travel: 200 mm, rapid traverse: 25,000 mm/min - Y-axis slide travel: 200 mm, rapid traverse: 25,000 mm/min Fluid Information: - Coolant supply: deep hole drilling oil - Tank capacity: 500 liters - 1x automatic filter, filter performance: 50 l/min - 1x monitoring filter - 2x ELB drilling oil supply lines - 1x flow divider - 1x air cooler with recirculation pump - 1x electrostatic oil mist extraction unit - 1x scraper belt chip conveyor - 1x hydraulic unit and pneumatic unit/equipment - 1x sump pump - 3x submersible pumps - 1x radial piston pump with remote adjustment: Delivery rate: 1–38 l/min Pump drive: 7.5 kW Spindle Unit: - Motorized spindles with frequency-controlled, infinitely variable speed regulation - Spindle head with connection for tool holder - 2 x tool holders for collet sleeves according to VDI 3208 SE10x60, permanently bolted to the spindle head of the motorized spindle Drill Bushing Carrier: - The drill bushing carrier is positionable via the NC axis - Cast iron design, mounted on linear guideways - W-axis drive via AC servomotor and ball screw with indirect, absolute position measurement system Workpiece Slide: - The workpiece slide is designed as a cross-slide for vertical and horizontal positioning of the workpiece, for mounting clamping plates or special fixtures - Base unit in cast iron design with linear roller guideways - X and Y axes driven by AC servomotors and ball screws - Direct, absolute position measurement systems. Table plate with clamping or alignment grooves Clamping Table with NC rotary indexing device for positioning: - With rotary and swivel axes - Hydraulic clamping in rotary and swivel axes Technical Data: - Swivel range: 270º - Rotary range: 360º - Center height: 25 ± 0.02 - Spindle distance: 200 ± 0.005 - Indexing accuracy: rotary axis ± 15" / swivel axis ± 30" Electrical Equipment Information: - 1x drilling process monitoring - 1x CNC control 840D (Solution Line) Connection Data: - Operating voltage: 3AC 400V ± 10% - Frequency: 50 Hz - Control voltage: 24 V DC Ibodpfx Ahjwh Rp Eeyoc - Total rated power: 25 kW Additional Machine Equipment: - 2 x holders for resilient drill bushing holders, arranged on the drill bushing carrier - For max. drilling Ø18 mm.

Condition: new, Year of construction: 2026, Drum chipper series ATH-220/530/3 | ATH-220/730/3 | ATH-220/1060/3 Ibodpfxjwbv Ers Ahyoc S&F chippers and drum chippers with horizontal infeed are used in many areas of the wood processing industry (sawmills, timber mills). Chippers from the ‘ATH’ series produce high-quality and homogeneous wood chips with a low proportion of fines from residual wood, for example as quality chips for the cellulose industry or as fuel chips for energy generation Series ATH-220/530/3 | ATH-220/730/3 | ATH-220/1060/3 - Feed height: 200 mm - Feed width: 500 | 700 | 1000 mm - Number of chipper knives: 2 - 4 pieces - Number of counter knives: 2 pieces - Rotor diameter:520 mm - Number of feed rollers: 3 pieces - Throughput: up to approx. 40 rm/h * - Chipping length: 5 - 50 mm - Chipper drive power: 22 - 110 kW - Drive power feed rollers: 2 x 2.2 kW - Operating/control voltage: 400/220 V, 50 Hz - Weight: 2,800 - 4,000 kg *depending on chipper length, kW main motor, number of knives, feed Advantages: - Maximum throughput - Low fines content - Low maintenance - Flexible use - Customised production

Condition: new, Factory-new electrically heated 1150L stainless steel agitator tank with insulation and propeller agitator, including operating manual and CE declaration of conformity. Type: EBB1150RWP Also available with alternative agitators and in other sizes. Volume: 1150L Dimensions approx.: Internal Ø 1190mm x cylindrical height 1000mm External Ø: 1390mm Total height: approx. 1300mm plus agitator drive Material: 1.4301 / AISI304 stainless steel Surface: IIIc/IIId / satin finish Internal welds ground smooth Max. operating temperature: 110°C Max. operating pressure: atmospheric - Upright design on four tubular legs with forklift channels - Top: Central traverse with two hinged covers - Bottom: Flat sloped base with lateral outlet DN50 DIN11851 and butterfly valve, EPDM gasket - Insulation: 50mm mineral wool around the cylinder, hermetically welded stainless steel 1.4301 cladding Equipment: Ibjdpow Dy D Djfx Ahysc 1x Top traverse with two hinged cover halves, clamp function for the lid Stainless steel grating below the hinged lid, bolted and removable 1x Agitator flange on the top 1x Inlet port DN50 DIN11851 on the top 1x Outlet fitting with butterfly valve DN50 DIN11851, EPDM gasket 1x nameplate Propeller agitator for low-viscosity media Power: 0.75 kW Speed: 1410 rpm Operating voltage: 3PH 400V