Used Support Ribbon Magnet for sale (14,219)

Condition: as good as new (ex-display), Year of construction: 2023, functionality: fully functional, total height: 3,500 mm, total length: 6,000 mm, total width: 3,000 mm, Brewhouse for microbrewery for sale. Lhjdpfori Rbwex Affjr The brewhouse with three devices is delivered with a platform. The control system (PLC), a Siemens PLC will be built according to your wishes and is included in the price. The brewhouse is equipped with pneumatic valves and is heated with steam. A steam generator can be offered separately. ZKT's and refrigeration equipment as well as additional desired devices and further equipment are available on request. The brewhouse is a trade fair exhibit and was presented by us at the Brau. plus delivery and assembly (if desired) Further accessories can be supplied on request. Scope of delivery: - 1x mash tun - 1x lauter tun - 1x combination device wort kettle & whirlpool - 1x plate heat exchanger with two stages (water & coolant) - 1x hop filter - 2x frequency-controlled centrifugal pump.

Condition: used, Permanent circular magnet Diameter: 220 mm Lhjdpfx Asxwkchsffjr Height approx.: 70 mm Weight approx.: 16 kg

Condition: good (used), Twin Ribbon Mixer Ledpjqu Uykofx Affehr Fully Stainless Steel Mixing Chamber Dimensions 1500mm Long x 1100mm Wide x 700mm Deep

Year of construction: 2005, condition: excellent (used), Magnet plates Year of manufacture: approx. 2005 Lhedpfexhh Sbjx Affer LxW: 70x75 cm

Year of construction: 2025, condition: new, This robust professional cable stripping machine, type KM1, cuts electrical cables from 1 to 70 mm in diameter. The blades are hardened so when stripping reinforced ground cable they are not immediately blunted. There are 15 different cable entries. The cable is cut from 2 sides so the copper core comes out easily. Lhodpfx Afop I I U Djfor You can also use it to strip rubber and flat cables. Technical data: Mains voltage: 230 v ~ 50 hz Power: 3000 watts with dual pulley drive. Dimensions: 60 cm long, x 75 cm wide and 90 cm high Machine speed: 35 m/min Output: Depending on the cable 400 and 1200 kg/day Weight: 185 kg.

Condition: not inspected (used), functionality: unexamined, MAGNET FOR CRANE OR EXCAVATOR Lhedpfx Afetp Iqvefjr

Condition: used, Permanent round magnet Diameter: 140 mm Mount: MK 4 Pull thread: M18 x 1.5 Lhsdpoxm Sw Esfx Affjr Weight approx.: 10 kg

Condition: like new (used), Year of construction: 2008, functionality: fully functional, mobile shredding machine - used- rebuilt - Arjes 760 D with magnet on wheelaxle Complete conversion to hydraulic drive -- High Performance Shredder -- the most powerful shredder in this size for heavy applications RECONSTRUCTION Machine was completely dismantled and rebuilt by steel construction. Conversion to hydraulic drive system Engine: Mercedes Benz OM 471 Stage 3 350 KW / 477 HP!!! (without AdBlue) - Gearbox: SYNCHRONOUS: 2x125,000NM - Hydraulics: Bosch Rexroth -- 285cbcm pump + 2x 215cbcm hydraulic motors - Control: NEW - Hydraulic lines: NEW Ledjv Dtfvjpfx Affehr - Radio: NEW - Shafts / tools: NEW (Combined tool for wood, garbage, light scrap) Machine is equipped with secondary crusher bars WERT GmbH is a metalworking company specializing in the development and production of twin-shaft shredding tools for renowned brands such as Hammel, Arjes, Linder, Eggersmann, Terex, and Keestrac. With an in-house design department and a highly skilled team, we provide customized, innovative solutions that meet the highest quality standards. Our goal is to continuously meet the individual needs of our clients through technological excellence and improvement. We serve companies across various sectors, including waste management, recycling, and mechanical engineering, and place great importance on long-term partnerships. With our reliable and high-performance shredding solutions, we help our clients increase their efficiency and competitiveness.

Condition: used, 3700mm long, 960mm high, and adjustable Ledpfx Afov Dauqefshr Storage location: Nattheim

Condition: good (used), The scope of delivery includes: 1x Depth bar, used Material color: raw Lhsdpfjwl Ncfsx Affjr Total length: approx. 1,110 mm Inner length: approx. 1,102 mm for stand depth: approx. 1,100 mm Clear span: approx. 1,000 mm Profile dimensions: K 140 x 60 x 4 mm Crossbeam support: approx. 52 mm Unit weight: approx. 7.10 kg Your contact persons in our company: Mr. Andre Evening Mr. Mario Klöver Mr. Falk Deutsch General information about the item: This item is available for pickup only. Any additional transport or shipping of this item is subject to additional costs, which can be requested separately from us depending on the delivery location and scope of delivery.

Condition: good (used), Permanent magnet motor, geared motor, electric motor, servo motor -Max. speed: 1200 rpm -Drive: 2.9 kW -Shaft: Ø 32 mm -Speedometer -External cooling -Number: 2x motors available -Price: per piece Lhsdeb A Ixpspfx Affsr -Weight: 70 kg/piece

Condition: good (used), Technical specifications for the deck support bar: Manufacturer: META (Thyssen) Items included: 01x deck support bar, used Design: recessed for 38mm chipboard Material colour: orange Overall length: approx. 1,115 mm Inner length: approx. 1,103 mm Frame depth: approx. 1,100 mm Clear support span: approx. 1,000 mm Profile dimensions: 85 x 50 mm Beam support width: approx. 51 mm Weight: 4.90 kg / pc. Lhodpfx Ajw Hfnmsffer Your contacts at our company: Mr. Andre Evering Mr. Mario Klöver Mr. Falk Deutsch General information about this item: This item is offered for collection only. If transport or shipping is required, additional costs will apply. These costs depend on the delivery location and order size and can be quoted upon request.

Condition: good (used), The scope of delivery includes: 1x Depth bar, used Material color: raw Total length: approx. 1,110 mm Inner length: approx. 1,102 mm for stud depth: approx. 1,100 mm Clear span: approx. 1,000 mm Profile dimensions: K 100 x 50 x 4 mm Lhodpfx Afowl Ullsfor Crossbeam support: approx. 52 mm Unit weight: approx. 5.42 kg Your contact persons in our company: Mr. Andre Evening Mr. Mario Klöver Mr. Falk Deutsch General information about the item: This item is available for pickup only. Any additional transport or shipping of this item is subject to additional costs, which can be requested separately from us depending on the delivery location or scope of delivery.

Condition: new, Mr: Andre Evering Mr.: Mario Klöver Mr.: Falk Deutsch Included in delivery are 04x shelf support, new Manufacturer: Mauser Material color: sendzimir galvanized material thickness: approx. 1,2 mm total height: approx. 43 mm total width: approx. 11 mm Weight/ pcs. approx. 0,008 Kg General information about the article: This item is offered for pickup only. A desired transport or shipment of this item or a shipment of this item is associated with additional costs, which are separately depending on the delivery location or scope of delivery can be requested from us. Our services at a glance: (prices on request) Assembly, erection our general assembly conditions are to be observed Rack inspection Rack inspection according to DIN EN 15635 executed according to the Lhsdpfoh Iy R Hsx Affer requirements of BGR 234 visual inspection for all racking systems Delivery with our own fleet (without unloading)

Condition: good (used), The scope of delivery includes: 01x support post, used Material color: blue total length: approx. 1.660 mm profile dimension: U: 70 x 30 mm material thickness: approx. 2,00 mm number of drill holes: 02 pcs. Drill hole Ø: approx. 11 mm Base plate dimension: approx. 130 x 130 x 3.00 mm Weight / pcs. : approx. 3,570 kg Lhedpsk Uufxsfx Affsr

Condition: good (used), Scope of delivery includes: 01x deep beam, used Material colour: black Ledpfx Afewwuchjfjhr Total length: approx. 1,111 mm Internal length: approx. 1,103 mm for upright depth: approx. 1,100 mm Clear support width: approx. 1,000 mm Profile dimensions: K 140 x 50 x 4 mm Cross member bearing: approx. 52 mm Unit weight: approx. 7.26 kg Your contacts in our company: Mr. Andre Evering Mr. Mario Klöver Mr. Falk Deutsch General information about the item: This item is offered for collection only. If transport or shipping is required, additional costs will apply; these can be requested from us separately depending on delivery location or scope of supply.

Condition: excellent (used), Included in delivery are: 01x depth bar, used Material color: sendzimir galvanized total length: approx. 1.010 mm depth of support: approx. 1.000 mm clear span: approx. 895 mm profile dim.: C: 75 x 45 x 18 mm Lodsib H Hyopfx Affshr Technical data of the deep bar: Manufacturer: Jung Heinrich Type: Esmena (TFZ 18) crossbar support: approx. 55 mm Material thickness: approx. 1.50 mm Weight: 2.731 kg / pc. ----- General information about the article: This article is offered for pickup only. A desired transport or a shipment of this article is associated with additional costs, which can be requested separately depending on the delivery location or scope of delivery with us.

Condition: good (used), Included in delivery are: 01x depth bar, used Material color: sendzimir galvanized Lodpfxji Dr S Es Affehr total length: approx. 1.020 mm suitable f. depth of the bar: approx. 1.000 mm material thickness: approx. 2,40 mm clear span: approx. 880 mm U-profile dim.: 58 x 50 mm cross beam support: approx. 67 mm Weight/piece: approx. 2,870 kg General information about the article: This article is offered for pickup only. A desired transport or shipment of this article is associated with additional costs, which can be requested separately depending on the delivery location or scope of delivery with us.

Condition: as good as new (ex-display), Remark: This is a II. Wahl product, new product unused. II. Wahl means there may be dust deposits, minimal scratches or dirt or dirt may be present. Technical data for the unit carrier: Manufacturer: SSI Schaefer Rack system: R 3000 Included in delivery are: 02x shelf beams, II. choice (new goods) Material color: sendzimir galvanized Type: KTRZ 31036 Z-profile: 60 x 40 x 12 mm clear width: approx. 994 mm perforated grid: approx. 53 mm agraffe: 3 HK (hooks) weight | pcs.: 1,700 kg max. load per truss pair 200 kg with evenly distributed load 02x unit truss, II. choice (new goods) material color: sendzimir galvanized total length: approx. 780 mm clear span: approx. 715 mm dimension: approx. 40 x 35 mm (WxH) material thickness: approx. 1,50 mm 01x wooden shelf, II. choice chipboard width: approx. 985 mm chipboard depth: approx. 717 mm material depth: 22 mm Ledpon Hqq Refx Affohr Your contact persons in our company: Mr.: Andre Evering Mr.: Mario Klöver Mr.: Falk Deutsch General information about the item: This item is offered for pickup only. A desired transport or shipment of this or a shipment of this article is associated with additional costs, which can be requested separately depending on the delivery location or scope of delivery can be requested from us.

Condition: new, Your contact persons in our company: Mr: Andre Evering Mr: Mario Klöver Mr: Falk Deutsch Lhsdpfx Afegqa Iqjfsr Mr: Simon Blank We offer you here new shelf supports of the manufacturer META for sale. - incl. shipping Germany-wide - Manufacturer: META Type: META FIX + META CLIP Included in delivery: 12x shelf supports, new material colour: compl. galvanized material thickness: approx. 1,24 mm total height: approx. 53,60 mm total width: approx. 18,08 mm Weight/ pcs. approx. 0,013 Kg Our services at a glance: (prices on request) Assembly, erection our general assembly conditions are to be observed Rack inspection Rack inspection according to DIN EN 15635 carried out according to the requirements of BGR 234 Visual inspection for all racking systems Delivery with our own fleet of vehicles (without unloading)

Condition: used, Material colour: galvanised/ System: META/ Weight 0.011 kg 12 x shelf support, used - Free shipping - Your contact persons in our company: Mr: Andre Evering Mr: Marcel Brahms We offer you here 12 used shelf supports of the manufacturer META for sale. Ljdpfxocbfg Nj Affjhr These are suitable for hanging shelves in the corresponding shelf racks. Included in delivery are: 12x shelf support used Material colour: compl. galvanized weight/ pcs. 0,011 kg Optimally suitable for the following shelves: Manufacturer: META Type: META FIX + META CLIP We are at your disposal for any questions.

Condition: new, The scope of delivery includes: 01x stage support, new Manufacturer: SSI Schäfer Lsdpfx Aemv Dyzoffehr design: corner connection / 90 suitable for CS Sigma profiles with a profile height of 300 mm type of screw connection: internal Material color: sendzimir galvanized Technical data of the stage support: Dimensions: approx. 140 x 275 x 105 mm (DxWxH) Hole spacing outside: approx. 250 mm Hole spacing inside: approx. 130 mm Hole diameter: approx. 13 mm Material thickness: 3.00 mm

Condition: excellent (used), Your contact persons in our company: Mr.: Andre Evering Mr.: Mario Klöver Mr.: Falk Deutsch Mr.: Simon Blank Included in delivery: 01x chipboard support, used Manufacturer: Mecalux Material color: orange total length: approx. 200 mm material thickness: approx. 1,5 mm for chipboard thickness: approx. 22 mm Lhodpfshy Nihex Affor Crossbeam support: approx. 50 mm Weight: approx. 0.455 kg / pc. Remark: - The inserted chipboard serves only as a fall-through protection! - For further dimensions, please refer to the attached drawing. General information about the article: This article is offered for pickup only. A transport desired beyond that or a shipment of this item is associated with additional costs, which can be requested separately depending on the delivery location or scope of delivery can be requested from us. Our services at a glance: (prices on request) Assembly, erection our general assembly conditions are to be observed Rack inspection Rack inspection according to DIN EN 15635 executed according to the requirements of BGR 234 visual inspection for all racking systems Delivery with our own fleet (without unloading)

Condition: good (used), Technical data for the deep bar: Manufacturer: SSI Schäfer Included in delivery: 01x depth bar, used Material color: grey total length: approx. 1.108 mm f. depth of upright: approx. 1.100 mm clear span: approx. 999 mm crossbeam support: approx. 55 mm profile dim.: CS 190 x 75 x 13 mm material thickness: approx. 2,00 mm weight / pcs.: approx. 8,020 kg Lhodpfjnl Dmkex Affsr Your contact person in our company: Mr.: Andre Evering Mr.: Mario Klöver Mr.: Falk Deutsch General information about the item: This item is offered for pickup only. A desired transport or shipment of this or a shipment of this article is associated with additional costs, which can be requested separately depending on the delivery location or scope of delivery can be requested from us.

Condition: good (used), The scope of delivery includes: 01x Locking bracket, used Material color: sendzimir galvanized Total length: approx. 1,640 mm Leg "A" approx. 39 mm (flanged) Leg "B" approx. 63 mm Lsdorfx Hzopfx Affohr Support surface: approx. 60 mm Leg "C" approx. 13 mm Material thickness: approx. 1.50 mm Weight / piece: approx. 2.330 kg General information about the article: This item is only offered for collection. Any additional transport or shipment of this item is subject to additional costs, which can be requested from us separately depending on the place of delivery or scope of delivery. depending on the place of delivery or scope of delivery.