Used Mig Mag for sale (3,485)

Condition: as good as new (ex-display), Fronius TPS 3200 ✅ Scope of delivery: ➤Fronius TPS 3200 power source (320A TRANS PULS SYNERGIC) ➤Fronius FK 4000 FC cooling unit – Equipped as standard with Flow Control, Thermocontrol, and a coolant filter. The cooling unit shuts off if the water cooling fails or overheats to protect the hose assembly. These features cost approximately €400 more from Fronius. ➤Fronius VR 7000 wire feed case – Compact and practical – in our opinion, the most useful feed case – the wire is safely stored in the enclosed case. ➤Fronius long intermediate hose package – each device is delivered with a 5-meter-long connecting hose package between the power source and the wire feed case for greater flexibility and better handling. Take the wire feed case with you to places that are difficult to reach! The connecting hose assembly is neatly attached to a hook on the side of the device. (Hooks are manufactured by us.) ➤ Large Fronius trolley – Arguably the best trolley with a gas cylinder holder on the market. ➤ Binzel hose assembly – With up/down amperage adjustment on the torch. ➤ Ground cable 3-4m ➤ New Messer pressure regulator ➤ New basket spool adapter for large wire spools This device can weld almost all materials, including aluminum, steel, and stainless steel (V2A). It features feeler wire programs and is also suitable for MIG brazing (Cusi), which is frequently used in the sheet metal industry. Additional options are available for an additional charge. e.g., Fronius Job Master hose package (display on the torch) + EUR 500.00 ----- IMMEDIATELY AVAILABLE PROPER INVOICE A viewing is possible in Austria in Vienna 1230! ✔ Insured shipping on a pallet is no problem! ✔ We can also be reached via WhatsApp and Viber. ✅Questions✅Questions✅Questions✅ Questions: ✅Questions✅Questions✅ Questions✅ ►►►What is the condition of the devices? To explain, we buy like-new used devices, disassemble them, check everything, replace any wear parts if necessary, and only then, after a successful test weld, are they released for sale. "All" devices are clean and have neither burn holes in the displays nor countless burn holes or dents scattered throughout the device! You're buying an item from us that's ⭐worth seeing and doesn't look completely finished! ►►►Do we receive an invoice when we buy from you? Yes, we provide a proper invoice. If you have a valid VAT ID, we can issue a net invoice if the requirements for intra-community delivery within the EU are met. ►►►What payment options are available? Advance payment or cash upon personal pickup Lhedpfxewbilxe Ahved ►►►Why buy from us? We are experts in this Fronius welding machine series and always have 60-80 devices in stock – exclusively Fronius, no other manufacturers! We are experts in these devices and don't sell anything we don't know anything about.

Condition: as good as new (ex-display), FRONIUS TPS 2700 with FK 4000 (SYNCHROPULS 270A DEVICE) Alu Edition ✅ Scope of delivery: ➤Fronius TPS 2700 power source (270A TRANS PULS SYNERGIC) Lhedpfx Ahswbitveved ➤Fronius FK 4000 water cooling system ➤Fronius hose package with display on the torch (arc, amperage jobs, etc. can be adjusted from the torch) ➤Fronius trolley ➤Ground cable 3-4m ➤Pressure regulator from Messer (new) ➤Gas hose ►►► Perfect for aluminum The Fronius TPS 2700 Alu Edition is particularly suitable for welding aluminum. Precise welding technology - user-friendly operation ----- IMMEDIATELY AVAILABLE PROPER INVOICE A viewing is possible in Austria in Vienna 1230! ✔ Insured shipping on a pallet is no problem! ✔ ✅Questions✅Questions✅Questions✅ Questions: ✅Questions✅Questions✅ Questions✅ ►►►What condition are the devices in? To explain, we buy like-new used devices, disassemble them, check everything, replace wear parts if necessary, and only then, after a successful test weld, is the device released for sale. "All" devices are clean and have neither burn holes in the displays nor countless burn holes or dents scattered throughout the device! You are buying an item from us that is also ⭐worth seeing and doesn't look completely finished! ►►►Do we receive an invoice when purchasing from you? Yes, you will receive a proper invoice from us. If you have a valid VAT ID, we can issue a net invoice if the requirements for intra-community delivery within the EU are met. ►►►What payment options are available? Advance payment or cash upon personal pickup ►►►Is insured shipping possible? Yes, we will be happy to send you the purchased set, well packaged and insured, on a Euro pallet. ►►►Is there a warranty? We sell the machines at one-third the original price and unfortunately do not have the flexibility to offer a warranty. You are welcome to test the devices on-site and pay in cash. ►►►Why buy from us? We are experts in this Fronius welding system series and always have 60-80 devices in stock – exclusively Fronius, no other manufacturers! We are familiar with these devices and do not sell anything we don't know anything about.

Condition: as good as new (ex-display), functionality: fully functional, type of cooling: water, FRONIUS TPS 5000 ✅ Scope of delivery: ➤Fronius TPS 5000 power source (500A TRANS PULS SYNERGIC) ➤Fronius FK 4000 ➤Fronius VR 4000 wire feeder unit ➤Fronius standard intermediate hose package from 1.5m ➤Fronius trolley ➤Fronius hose package ➤Ground cable 3-4m ➤Pressure regulator This device can weld almost all materials, including aluminum, steel, and V2A. It features touch wire programs and is also suitable for MIG brazing (Cusi), which is frequently used in the sheet metal industry. Additional options and applications: This TPS series can be easily connected to a robot. All you need is an interface and the appropriate hose package. We also offer the optional RCU 5000i control panel, which allows you to create and import characteristic curves to further expand the functions of the TPS device. ---- IMMEDIATELY AVAILABLE PROPER INVOICE A viewing is possible in Austria in Vienna, 1230! ✔ Insured shipping on a pallet is no problem! ✔ ✅Questions✅Questions✅Questions: ✅Questions✅Questions✅ Questions✅ ►►►What is the condition of the device? To explain, we buy like-new used devices, disassemble them, check everything, replace wear parts if necessary, and only then, after successful test welding, is the device released for sale. "All" devices are clean and have neither burn holes in the displays nor countless burn holes or dents scattered throughout the device! You are buying an item from us that is also worth seeing and doesn't look completely finished! ►►►Do we receive an invoice when we purchase from you? Yes, we provide a proper invoice. If you have a valid VAT ID, we can issue a net invoice if the requirements for intra-community delivery within the EU are met. ►►►What payment options are available? Advance payment or cash upon personal pickup ►►►Is insured shipping possible? Yes, we will be happy to send you the purchased set well packaged and insured on a Euro pallet. ►►►Is there a warranty? We sell the machines at one-third the original price and unfortunately do not have the flexibility to offer a warranty. You are welcome to test the devices on site and pay in cash. ►►►Why buy from us? Lhjdowbh Ifepfx Ahvsd We are experts in this Fronius welding machine series and always have 60-80 devices in stock – exclusively Fronius, no other manufacturers! We are experts in these devices and don't sell anything we don't know about.

Condition: as good as new (ex-display), ►►► FRONIUS TPS 3200 SET OFFER €3,290 net including BINZEL UP DOWN HOSE PACK or Fronius AW hose package with display on the torch including connection conversion (+€500) ✅ Scope of delivery: Lodpfx Ahewbilljvohd ➤Fronius TPS 3200 power source (320A TRANS PULS SYNERGIC) ➤Fronius FK 4000 FC cooling unit – Equipped as standard with Flow Control, Thermocontrol, and coolant filter. The cooling unit shuts off if the water cooling fails or overheats to protect the hose package. These features cost approximately €400 more from Fronius. ➤Fronius VR 7000 wire feed case – Compact and practical – in our opinion, the most useful wire feed case – the wire is safely stored in the enclosed case. ➤Fronius Intermediate Hose Package (Long) – Each device comes with a 5-meter-long connecting hose package between the power source and the wire feeder case for greater flexibility and better handling. Take the wire feeder case with you to places that are difficult to reach! The connecting hose package is neatly attached to a hook on the side of the device. (Hooks are manufactured by us.) ➤Fronius Large Trolley – Arguably the best trolley with gas cylinder holder on the market. ➤Binzel Hose Package – With up/down amperage adjustment on the torch. ➤3-4m Earth Cable ➤New Messer Pressure Regulator ➤New Basket Spool Adapter for Large Wire Spools This device can weld almost all materials, including aluminum, steel, and stainless steel (V2A). It features tracer wire programs and is also suitable for MIG brazing (Cusi), which is frequently used in the sheet metal industry. Additional options are available for an additional charge. e.g., Fronius Job Master hose package (display on the torch) + EUR 450.00 The first 10 buyers of a device will receive an additional --> 2nd hose package free Currently 30+ ⭐TPS 3200 SET⭐ in stock ----- Debsum Rw Dokh Hufpokk AVAILABLE FOR IMMEDIATE DELIVERY PROPER INVOICE A viewing is possible in Austria in Vienna 1230! ✔ Insured shipping on a pallet is no problem! ✔ We can also be reached via WhatsApp and Viber. ✅Questions✅Questions✅Questions: ✅Questions✅Questions✅ Questions: ✅Questions✅Questions✅ ►►►What is the condition of the devices? To explain, we buy like-new used devices, disassemble them, check everything, replace any worn parts if necessary, and only then, after a successful test weld, is the device released for sale. "All" devices are clean and have neither burn holes in the displays nor countless burn holes or dents scattered throughout the device! You're buying an item from us that's ⭐worth seeing and doesn't look completely finished! ►►►Do we receive an invoice when you purchase from us? Yes, you receive a proper invoice from us. If you have a valid VAT ID, we can issue a net invoice if the requirements for intra-community delivery within the EU are met. ►►►What payment options are available? Prepayment or cash upon personal pickup ►►►Why buy from us? We are experts in this Fronius welding series and always have 60-80 devices in stock – exclusively Fronius, no other manufacturers! We know about these devices and don't sell anything we don't know about.

Condition: as good as new (ex-display), ►►► FRONIUS TPS 3200 SET OFFER ✅ Scope of delivery: ➤ Fronius TPS 3200 Power Source (320A TRANS PULS SYNERGIC) ➤ Fronius FK 4000 FC Cooling Unit – Standard features include Flow Control, Thermocontrol, and coolant filter. The cooling unit shuts off if the water cooling fails or gets too hot, to protect the torch package. These functions cost approximately €400 extra from Fronius. ➤ Fronius VR 7000 Wire Feed Case – Compact and practical – in our experience, the most useful wire feed case – the wire is securely stored in the closed case. ➤ Fronius Intermediate Hose Package, long version – each machine is supplied with a 5-meter-long connection hose between the power source and the wire feed case for greater flexibility and improved handling. Take the wire feed case off the machine to access hard-to-reach areas! The connecting hose is neatly stored on a hook on the side of the machine. (Hooks are produced by us) ➤ Fronius Large Trolley – Probably the best trolley with a gas bottle holder on the market. ➤ Binzel Torch Package – With up/down amperage control on the torch. ➤ Ground cable 3-4m ➤ New Messer pressure regulator ➤ New basket reel adapter for large wire spools Ledewbil Sjpfx Ahvshd With this machine, almost all materials can be welded, including aluminum, steel, and stainless steel (V2A). It features pulse wire programs and is also suitable for MIG brazing (CuSi), commonly used in the sheet metal industry. Additional options are available at extra charge For example: Fronius Aw4000/Aw5000 Job Master Torch Package (with display on torch) + EUR 550.00 ----- IMMEDIATELY AVAILABLE PROPER INVOICE Inspection is possible in Austria, Vienna 1230! ✔ Insured shipping on a pallet is no problem! ✔ We are also available via WhatsApp and Viber. ✅Questions✅Questions✅Questions✅Questions: ✅Questions✅Questions✅Questions✅ ►►► What is the condition of the equipment? For clarification: we purchase nearly new used equipment, disassemble and thoroughly inspect everything, replace wear parts as necessary, and only after a successful test weld do we release the equipment for sale. "All" machines are clean with no burn marks on the displays and without numerous burn holes or dents! With us, you buy an item that is ⭐in excellent condition and doesn’t look worn out! ►►► Do we receive an invoice when purchasing from you? Yes, you will receive a proper invoice from us. If you have a valid VAT ID and meet the requirements for intra-community delivery within the EU, we can issue a net invoice. ►►► What payment options are available? Prepayment or cash on personal collection. ►►► Why buy from us? We are experts in this series of Fronius welding machines and always have 60-80 units in stock – exclusively Fronius, no other brands! We know these machines inside out and do not sell anything we don’t have expertise in.

Condition: as good as new (ex-display), ⭐ FRONIUS TPS 4000 ⭐ Fully equipped Device description/scope of delivery: Fronius TPS 4000 fully equipped device - you can't get more than this! - Pulse 400 Ampere power source - FK 4000 FC cooling unit with optional filter including flow control (==>if no water circulates, the device shuts down to protect the hose package). - VR 4000 with optional rollers underneath + long connecting hose package + metal feed rollers - only the best of the best. - Fronius Aw5000 hose package with Job Master function on the torch (==>display on the torch / amperes, job, feed, arc adjustable on the torch) Photo = scope of delivery. All prices quoted are starting from prices. Prices are calculated individually according to your configuration requirements. New price approx. €15,000 (net). We are offering it for 1/3 the new price. Not comparable to Transsteel junk. Why buy from us rather than from anyone else: - We are professionals when it comes to this Fronius welding machine series. We always have around 60-80 units in stock. Only these Fronius devices, not other manufacturers! - We don't just push the devices through; we disassemble them, test them, replace wear parts, and only sell them when everything is working perfectly. - All our devices are sold with the popular Fronius welding torches. NOT a 100-euro buy-it torch, but QUALITY! The Fronius welding torches cost between 650 and 900 euros net, depending on the configuration! - Our devices are "all" clean and don't have burn holes in the displays or countless burn holes/dents scattered throughout the device! You're buying an item from us that's worth seeing and doesn't look completely finished! - It's worth buying from us. - As our customer, you have the opportunity to obtain suitable spare parts and support at reasonable prices if necessary. - You will receive a proper invoice with VAT shown. All devices can be inspected, paid for, and picked up at our main warehouse in Vienna by appointment! Lsdpfx Aevlwh Dshvshd Insured shipping on pallets is of course possible! All prices are starting from £100. You can configure the devices with us. Robot device or handheld device. Long or short connecting hose package. A wide variety of hose packages to choose from. Synchropuls. 270, 400, or 500 amp devices in stock. CMT version available as handheld or robot. It's best to call us. We'll discuss your application and give you an initial price estimate.

Condition: good (used), Inert gas welding machine with pulse function, pulse-arc welding system, MIG/MAG pulse welding system -with: 3 hose packages (1x aluminum, 1x stainless steel, 1x steel) -Max. welding power: 330 A -Equipment: remote control connection, with removable wire feed, including ground cable, gas fitting -Wire feed: 4-roller drive -Cooling: Water-cooled -Dimensions: 655/900/H1490 mm Ledpfx Ahed I U Dwovohd -Weight: 160 kg

Condition: used, MIG / MAG Pulse Gas-Shielded Welding Machine FRONIUS Type TransPulsSynergic - TPS 330 Art. No.: 4.075 Serial No.: Year of manufacture approx. 2000 Output: 330 amps = 50% duty cycle (DC) 300 amps = 60% duty cycle (DC) 210 amps = 100% duty cycle (DC) Stepless adjustment range Open circuit voltage approx. 50 V Open circuit voltage approx. 30 V Power supply: 400 V, 50 Hz, 32 A plug - Digital display for voltage and amperage - Pulse welding function - Various welding programs selectable Welding methods: MIG/MAG/TIG (programmed and manual modes) 2-stroke, 4-stroke, 4-stroke special, and spot welding - Welding control with program memory and disk drive for external program storage - Separate 4-roller wire feeder FRONIUS Type VR 152 with connecting hose package approx. 1.5 meters - 4-meter BINZEL hose package with central connection - External Fronius water cooling unit Type FK 71 - Welding gas pressure regulator Ljdpsyv H Elofx Ahvshd - Supplied with 1.2 mm welding wire Space requirements (L x W x H): 900 x 660 x 1550 mm Weight: approx. 160 kg Good condition – fully functional – ready for demonstration

Condition: refurbished (used), functionality: fully functional, welding current (max.): 400 A, Equipment: type plate available, ESS EcoMag 414 – Water-cooled MIG/MAG Note: This is a Trade-in. Refurbished, tested, serviced, and ready for immediate use. Specifications: Lhjdpfx Aheywatrovsd 40-400 AMP 380 Volt Water-cooled 2/4 Step / 4 Roller drive Steplessly adjustable Including PRO5000 Welding torch, earth work cable with clamp, gas cable, and +- 5 meter interconnection hose. Visits by appointment only. Test welding is possible. A video of the machine in welding condition is possible. We also deliver to countries like Spain, Germany, Austria, Lithuania, Greece and all other countries inside and outside Europe with Euro pallets per freight. All our machines have been serviced and are 100% ready to use unless otherwise indicated. The pictures above show the real machine. We can also offer you other types of machines such as: Used, New, Mig, Mag, Co2, Tig, Pulse, AC/DC, Plasma, Water-cooled, Electrode, Brands we offer: OTC, Migatronic, Lincoln, Miller, Fronius, Kemppi, Parweld, Tico, Lorch, Rehm, Selco, Carl Cloos, Cebora, Esab, Saf, EWM, Ess, Kemper. You always do business with Cjays Lastechniek itself and never with third parties.

Condition: refurbished (used), functionality: fully functional, warranty duration: 3 months, type of cooling: water, welding current (min.): 40 A, welding current (max.): 420 A, Equipment: type plate available, ESS Powermag 461 – Water-Cooled MIG/MAG Double wire feed 3 Months Warranty Refurbished, tested, serviced, and ready for immediate use. Specifications: 40-420 AMP 380 Volt Water-cooled Synergic 2/4 Step / 4 Roller drive Double Wire Feed 36 Steps adjustable Spot welding Fixed programs Including 2 MIG PRO5000 welding torches, earth work cable with clamp, gas cable, and +- 3 Meter Interconnection hose. Ledpfx Asywaqkohvohd Visits by appointment only. Test welding is possible. A video of the machine in welding condition is possible. We also deliver to countries like Spain, Germany, Austria, Lithuania, Greece and all other countries inside and outside Europe with Euro pallets per freight. All our machines have been serviced and are 100% ready to use unless otherwise indicated. The pictures above show the real machine. We can also offer you other types of machines such as: Used, New, Mig, Mag, Co2, Tig, Pulse, AC/DC, Plasma, Water-cooled, Electrode, Brands we offer: OTC, Migatronic, Lincoln, Miller, Fronius, Kemppi, Parweld, Tico, Lorch, Rehm, Selco, Carl Cloos, Cebora, Esab, Saf, EWM, Ess, Kemper. You always do business with Cjays Lastechniek itself and never with third parties.

Condition: used, MIG MAG welding machine, shielding gas welder CLOOS type GLC 357 N Ledpfx Ahshubg Tsvehd MIG MAG welding power source Serial no. 576 Year of manufacture approx. 1985 Rated output 350 Amp. Output 350 Amp. - 80% duty cycle 310 Amp. - 100% duty cycle Continuously adjustable output range Connection hose package: 4.5 meters Power supply: 380 Volt, 50 Hz, 32 Amp plug - 2-stroke and 4-stroke welding function - External wire feeder type CK 72 ZK with 2-roller drive and 4.5 meter hose package - 3 meter hose package with central connection and CLOOS hand torch - Water-cooled - Pressure gauge for gas cylinder - Welding unit equipped with 1 mm welding wire Space requirements (L x W x H): 1250 x 600 x 1100 mm Weight: 260 kg Machine tested – fully functional

Condition: used, Impulse shielding gas welding machine REHM type RMP 400 Hybrid (REHM-Mega-Puls) Pulse welding unit with inverter welding power source Serial no. Year of manufacture 1998 Power output 400 Amps = 60% duty cycle 320 Amps = 100% duty cycle Continuously adjustable range Mains connection 400 Volt, 50 Hz, 32 Amp plug - separate 4-roller wire feed unit with connecting hose package meters - digital display for voltage and current - pulse welding function with single and double pulses - 2-stroke and 4-stroke welding function - 4 meter Binzel hose package with central connection - water-cooled - shielding gas pressure regulator - MIG/MAG pulse arc welding - MSG double pulse welding - MIG/MAG welding Space requirement L x W x H 1150 x 510 x 1350 mm Weight 200 kg good condition Lhedpfx Aowa Uwdshved

Condition: good (used), Inert gas welding machine, inert gas welding machine, arc welding system, MIG/MAG welding system -Max. welding power: 400 A -Wire feed: 4-roller drive -Version: Water-cooled -Accessories: incl. ground cable, removable wire feeder, gas fitting, hose package 4 m -Quantity: 1 piece available Lhedpfswl Dptox Ahvod -Dimensions: 500/1010/H1600 mm -Weight: 162 kg

Condition: excellent (used), Year of construction: 2015, Technical specifications: Welding robot with 3 axes Number of axes: 3 Ledpfeymnqpsx Ahvjhd Travel range: Longitudinal travel: 4,200 mm Transverse travel: 1,200 mm Vertical travel: 1,000 mm Rotary head with motorised tailstock Centre height: 980 mm Centre distance: 4,500 mm Carrying capacity of 1 rotary device: 3,000 kg Power source: FRONIUS Transpuls Synergic 5000 MIG/MAG Welding torch cleaning station: ABICOR BINZEL The seller assumes no liability for typing or data transmission errors. The machine's appearance, technical condition, and wear correspond to its age; used machines are sold without any guarantee or warranty.

Year of construction: 1995, condition: used, 1 used well preserved water cooled inert gas welder MIG-MAG Make: ARTEC Model: W 501 Year of manufacture: 1995 Technical data: Welding current range up to 500 A Weight approx. 250 kg Accessories / special features: - water cooling Ledpfxsb Nd E Rj Ahvehd - separate wire feeder ARTEC DV-W1 with 4 rolls wire feeder - incl. hose package, pressure reducer and ground cable Further technical data see pictures! Siegfried Volz Machine Tools Rüschebrinkstr. 151-153 D - 44143 Dortmund-Wambel

Condition: refurbished (used), Year of construction: 2015, functionality: fully functional, warranty duration: 3 months, type of cooling: water, hose package length: 4,000 mm, welding current at 60% duty cycle: 300 A, welding current at 100% duty cycle: 250 A, welding current (min.): 25 A, welding current (max.): 350 A, Lorch MicorMig 350 – Synergic MIG/MAG Water-cooled 3 Months warranty Refurbished, tested, and ready-for-use Suitable for: Daily welding work, machine building, steel and stainless steel construction up to 15mm Not suitable for: Aluminum, on-and-on production welding, ship building. Specifications: 350 AMP 380 Volt Synergic SpeedArc 2/4 Step 4 Roller drive Ledpfx Aheyi Udbovjhd Fixed programs Elektrode option Including: Welding torch, ground cable with clamp, and gas cable. Visits by appointment only. Test welding is possible. A video of the machine in welding condition is possible. We also deliver to countries like Spain, Germany, Austria, Lithuania, Greece and all other countries inside and outside Europe with Euro pallets per freight. All our machines have been serviced and are 100% ready to use unless otherwise indicated. The pictures above show the real machine. We can also offer you other types of machines such as: Used, New, Mig, Mag, Co2, Tig, Pulse, AC/DC, Plasma, Water-cooled, Electrode, Brands we offer: OTC, Migatronic, Lincoln, Miller, Fronius, Kemppi, Parweld, Tico, Lorch, Rehm, Selco, Carl Cloos, Cebora, Esab, Saf, EWM, Ess, Kemper. You always do business with Cjays Lastechniek itself and never with third parties.

Year of construction: 2006, condition: ready for operation (used), A complete Severt robotic welding system is available. Travel path X: 8000mm, robot axes: 6, stations: 2, axis positioners: 2, positioner speed: 6rpm, positioner load capacity: 1000kg, faceplate torque: 1000Nm, power source: OTC DP 500, power output: 350A. Including seam tracking sensor, push-pull torch, hose packages, wire guide spirals, contact tips, gas nozzles and additional items. Documentation vorhanden. On-site inspection is possible. Lhedex U Dxaepfx Ahved

Condition: refurbished (used), functionality: fully functional, type of input current: three-phase, type of cooling: water, welding current (min.): 60 A, welding current (max.): 450 A, Carl Cloos GLC 451 C - Water-cooled Mig Mag Step-controlled 3-month warranty Suitable for: Heavy steel and stainless steel construction, 3-shift operation, workshop. Not suitable for: Hobby use, thin sheet metal. Specifications: 60-450 AMP 380 Volt Water-cooled 30 steps adjustable 2/4 stroke 4 roller driven Adjustable burnback time Includes: Mig welding torch, earth cable with clamp, gas hose, and 10 metre intermediate package. Visits by appointment only. Test welding is possible. A video of the machine in welding condition is possible. We also deliver to countries like Spain, Germany, Austria, Lithuania, Greece and all other countries inside and outside Europe with Euro pallets per freight. All our machines have been serviced and are 100% ready to use unless otherwise indicated. The pictures above show the real machine. We can also offer you other types of machines such as: Used, New, Mig, Mag, Co2, Tig, Pulse, AC/DC, Plasma, Water-cooled, Electrode, Brands we offer: OTC, Migatronic, Lincoln, Miller, Fronius, Kemppi, Parweld, Tico, Lorch, Rehm, Selco, Carl Cloos, Cebora, Esab, Saf, EWM, Ess, Kemper. You always do business with Cjays Lastechniek itself and never with third parties. Lhjdpfx Aheyhd A Rsvsd

Condition: good (used), MIG/MAG hose package, MIG/MAG welding torch -MIG/MAG hose package: Gas-cooled -Length: 3.3 m -Transport dimensions: 560/460/H90 mm Lhodpfsvcxwujx Ahved -Weight: 4.0 kg

Condition: used, MIG/MAG hose package, MIG/MAG welding torch -MIG/MAG hose package: gas-cooled -Length: 3,3 m -Transport dimensions: 600/460/H60 mm -Weight: 3,1 kg Ljdjucmnpjpfx Ahvehd

Condition: used, MIG/MAG hose package, MIG/MAG welding torch -MIG/MAG hose package: water-cooled Ledpfjucmptex Ahvjhd -Length: 4.30m -Transport dimensions: 600/420/H90 mm -Weight: 3.8 kg

Condition: good (used), MIG/MAG hose assembly, MIG/MAG welding torch -MIG/MAG hose assembly: Gas-cooled -Length: 3.9 m -Dimensions: 450/450/H90 mm Lhedpfx Aeutur Sehvjd -Weight: 3.2 kg

Condition: good (used), MIG/MAG hose package, MIG/MAG welding torch -MIG/MAG hose package: Gas-cooled -Length: 4.0 m -Transport dimensions: 400/360/H60 mm Lhedpfjutuvqsx Ahvjd -Weight: 1.7 kg

Condition: good (used), MIG/MAG hose package Lhsdpfsd Nw Hqex Ahved -for: welding robots -Length: 0.9 m -Plug -Water cooled -Weight: 1.9 kg

Condition: used, MIG/MAG hose package Lsdpfx Aefd Rrrshvohd -Dinse: DIX MC2 -Length: 3.0 m -Dinse: plug -Water cooled -Price: per piece -Number: 1 pieces -Weight: 2.7 kg