Used Support Ribbon Magnet for sale (14,109)

Condition: used, Electro round magnet, crane magnet, load magnet, lifting magnet STEINERT type LR 250-N-2 Serial no.: 421850 Load capacity: 1000 kg Magnet diameter: 250 mm Power consumption: 0.662 amperes Pgodpjxf Uygofx Ahvsi Mains connection: 200 volts DC = direct current - An external power supply is required (not included) - For crane operation - Load test performed on crane – material-magnet detachment between 2200 - 2250 kg Net weight: 32 kg

Condition: good (used), Support milling motor RUWO Weitmann Mod.SFE 20/G3 4 milling spindle speeds Motor 380 Volt 2800/1400 n1/min. 0,55 / 0,44 kw Pedpfx Aettk U Eohvsgi Accessories : 5 collets : 5-6-10-12-16 mm Transport dimension : L.500 mm W.250 mm H.350 mm Weight 48 kg

Condition: good (used), Year of construction: 1984, Tiede Universal U550 GW Magnetic Electric Crack Tester Manufacturer: Tiede GmbH Type: U550 GW Type: Magnetic-electric crack tester Rated operating current I 5400 A alternating current seats resp. 3800 A alternating current effective, adjustable in 8 steps Flow rate Ø: 8000 Aw full wave direct current. Adjustable in 8 steps, measured according to DIN 54 131 Mobile magnetizing coil lights Ø 800 Feedthrough Ø: 5000 Aw with alternating current adjustable in 8 steps, gemsen according to DIN 54131 Year of construction 1984 Accessories/Special equipment Electronic magnetization controls Demagnetization device Support rollers Darkening cabin Main machine dimensions total length mm 8.000 total width mm 2.500 Total height mm 2.500 Working area remarks Nominal diameter mm ~5.500 Field of application: testing of crankshafts. Item condition: used Pedpfjifpg Aox Ahvsgi For further technical data please refer to the machine card. Financing through our bank is also possible. komplett-konzept.leasingo.de Find more items – new and used – in our shop! International shipping costs on request!

Condition: excellent (used), NNP Ribbon blender Podpfxstppn Ae Ahvsgi 300Kg stainless ribbon blender, 4Kw motor, central bottom discharge door, safety mesh and lid, 3Ph

Condition: good (used), Year of construction: 2005, Electro milling magnet manufacturer: SAV Type:243.77-960X485 Year 2005 with control transformer. Dimensions: 960 mm x 485 mm Height 100 mm Pgjdswnpkbepfx Ahvji Weight approx. 250 kg.

Condition: new, Year of construction: 2026, Extremely powerful industrial magnet for iron separation Special price: €990 net (shipping €14.90 net) *Construction lengths can be found in image 2 The active side is equipped with a stainless steel end plate (material 1.4301). Threaded holes are provided on the rear side for mounting; *handle available on request The block magnet systems can be used at temperatures of up to max. +100°C operating temperature. The magnet surface should be cleaned regularly from captured iron parts. Pickup distances for all types, for example: For a steel nut M5: approx. 60 mm For an M5 x 30 screw: approx. 100 mm Mounting example 1: Mounted above a conveyor belt, 'iron parts jump onto the holding surface of the magnet.' Mounting example 2: Mounted within a pipeline system with direct contact to the material flow. For maximum separation safety, a cascade setup of multiple block magnets in series is possible. Assembly and safety instructions: When handling, already upon unpacking and later during installation, ensure that there are no loose iron parts, such as tools or screws, nearby. Podpotqfhxefx Ahvjgi The magnetic force is so strong that painful injuries may occur if fingers get caught between iron parts and the active surface. There should be no steel parts under the active surface within a minimum distance of 400 mm.

Year of construction: 2017, condition: excellent (used), machine/vehicle number: PO3503522, very high capacity overbelt magnet length overall = 3610 +0/-100 | magnets = 1600+800 width overall = 2240 | belt = 1600 | cleats = 1500 height = 1120 weight = ca 8000kg electro pick up magnet 10kW, enclosed, oil cooled belt drive SEW, 5,5kW Pgsdpsivdg Djfx Ahvsi belt speed 1.35m/s

Condition: used, Conveyor belt, belt conveyor, magnetic conveyor belt NEUHÄUSER Type 1700 x 50 / 1,060 + 110S Year of manufacture: approx. 2003 Usable length: 1700 mm Belt width: 50 mm Belt length: 3700 mm Aluminium frame profile cross-section H x W: 60 x 80 mm Roller diameter drum motor: 110 mm Roller width drum motor: 250 mm Belt speed: approx. 30 m/min. Motor power: 0.22 kW Pgjdpfxjxcbppe Ahvsi Power connection: 400 Volt, 50 Hz - Drive via drum motor BDL Type 110S - Magnetic rail under belt conveyor - Belt body made of aluminium system profile with 12 mm slot - 1 piece conveyor belt NEW 3700 x 50 mm - Front frame profile slightly damaged (see photo), no impact on function - Guide at front reversing roller broken off (see photo) Overall dimensions L x W x H: 1820 x 370 x 120 mm Weight: approx. 30 kg

Condition: excellent (used), Rexroth Indramat MHD112C-035-PG3-BN Servomotor Manufacturer: Rexroth Model: MHD112C-035-PG3-BN 4000 min-1 Part No. 294649 IP: 65 13,3 kW Pgjdperklgzsfx Ahvji 48 kg You can find more new and used motors in our store! International shipping costs on request!

Condition: ready for operation (used), An IFE magnetic separator with a Wagner magnet is available. Magnet type: FE0446-30/55, magnet weight: approx. 78kg. On-site inspection is possible. Pgsdpfxov Dwi Es Ahvsi

Condition: new, Year of construction: 2022, Jungheinrich, Kongamek support arm trolley Drying boards for carpenters or joiners Jungheinrich article number: 167793-4A several available 3 packages, can be sent 14 layers Support arm diameter 20mm Installation height 1770mm Pgjdpfxjvntzxj Ahvji External dimensions height 1960mm and length 1520mm Frame width and external dimensions depth 860mm Load capacity per level 20kg Own weight 73mm Delivered disassembled

Condition: used, Worm gear, bevel gear Manufacturer: Sew-Eurodrive Type: DFY112ML/TH Output speed: 1400 rpm Torque: 24 Nm Power: 6.6 kW IP65 Pedpsudywgsfx Ahvjgi Voltage: 50 Hz V 230/400v Power consumption: A 49.50/16.50 Speed: 3000 rpm Gear ratio (i): 27.88:1 weight: 36 kg

Condition: good (used), Year of construction: 1994, functionality: fully functional, Electromagnetic belt separator Steinert Pedpjvyuy Hofx Ahvogi length: 1500mm width: 900mm Year of manufacture: 1994 Protection class of magnetic housing IP44 Magnet power 2,2 kW; Material flow rate 1.8 m/s; Drive power 2,2 kW; Control voltage 230 V; Operating voltage 3x400 V; Frequency 50 Hz; weight: 2200kg

Year of construction: 2007, condition: excellent (used), functionality: fully functional, Electromagnetic belt separator IFE MEL 1400 length: 3200mm width: 1200mm Year of manufacture: 2007 Protection class of magnetic housing IP65; Magnet power 7.55 kW; Material flow rate 1.8 m/s; Drive power 4 kW; Control voltage 230 V; Pgsdpfx Ahopcf Etjvji Operating voltage 3x400 V; Frequency 50 Hz; cylinder diameter: 500mm Total weight: 6480 kg Adjusting the device belt and tension

Condition: excellent (used), Year of construction: 2020, operating hours: 1,800 h, overall weight: 3,000 kg, rotor diameter: 360 mm, rotor length: 1,000 mm, power: 45 kW (61.18 HP), Shredder, ideal for processing pallets, cables, plastics, and more. Equipped with a feed conveyor with magnetic drum for nail separation. Also suitable for plastics thanks to the powerful 45 kW motor. Fitted with hydraulic pusher. Rotor width: 1000 mm. Rotor diameter: 360 mm. Motor: 45 kW. 56 blades on the rotor. Original price was €80,000! Pgjdpfx Ahsw Td S Nsvoi

Condition: new, Year of construction: 2026, Aluminum Angled Conveyor Belt with Substructure including adjustable feet and machine feet for leveling uneven surfaces Horizontal section: 2,500 mm Inclined section: 6,000 mm Incline angle at the bend: 45° Height of the horizontal section: 350 mm Total conveyor length measured on the floor: 6,750 mm Discharge height at the end of the conveyor: 4,500 mm Design: Aluminum construction - Double profile reinforced 90x45 mm - Full-surface discharge sheet 2.0 mm galvanized Drive drum and return drum S235 steel, welded and machined Ø100x620 mm crowned and turned, shaft fixed with pillow block bearings. Drive: Shaft-mounted gear motor 1.10 kW, belt speed: 0.53 m/sec Electrical connection 230/400 V, 50 Hz, IP54 protection class Drive supplied ready for connection up to the motor terminal box (Commissioning must be carried out by a qualified electrician) PU conveyor belt DM 10/2 0+005 PU including wave edge PU petrol matte Belt width: 600 mm 2 pcs wave edges 50 mm high, 25 mm wide, high-frequency welded 42 pcs T-40 cleats, 400 mm long, approx. 401 mm spacing Belt material: 2-ply, highly cross-stable In the bend area, the belt is guided on both sides by 3 hold-down rollers each. The belt features a 70 mm edge-free zone on both sides. Due to the wave edges, the usable belt width is reduced: Usable width: 300 mm, as follows: (top view) cross section 70+25+5+400+5+25+70 mm Special features: Belt guidance via PVC wedge strip on the running surface profile - 10x6 mm - Including widened substructure for improved stability against top-heaviness - Including cut-out in the discharge sheet - Including sliding guides in drive and return drums Psdeyhzhzjpfx Ahvogi - Including magnet-free zone in the area of the overbelt magnet separator - Including bracket for DMPM1200 in the inclined section Discover customized solutions for your industry! As an innovative mechanical engineering company, we are proud to offer tailor-made solutions for the recycling, food, and further processing industries. Our comprehensive product portfolio includes everything from conveyor belt systems, flat conveyors, inclined conveyors, and angled conveyors to Z-conveyors. In addition, we manufacture feed hoppers, magnetic separators, overband magnet separators, drum magnets, and dosing bunkers – all custom-built to our customers' specific requirements. We understand that each industry and project is unique. That is why we individually adapt our solutions to your specifications and requirements. Complex projects are an exciting challenge for us, and we look forward to developing innovative solutions together with you. For us, there are no special designs – we find the right solution for every challenge! Put us to the test! Contact us and discover how we can transform your requirements into bespoke solutions. Let’s shape the future of your production processes together! Conveyor belt, conveyor system, discharge belts, belt conveyors, magnetic separator, overband magnet separator, recycling, wood chips, plastics, metal-free, metal detection, neodymium, overband magnet, magnetic belt separator, lifting magnets, filter rods, magnetic grids, magnetic grates, metal separator, block magnet, filter systems, dosing hoppers, feed hoppers, filling systems

Condition: good (used), 1x electromagnet with coolant connection, 500 x 200 x height 125 mm, and 1x electromagnet without coolant connection. Items are sold individually. Pgjdpfoyhy Exex Ahvoi

Condition: excellent (used), Electromagnetic clamping plate (28490) Length 500 mm width 250 mm Psdpfx Aetrngpjhvegi height 75 mm Voltage 90 Volt 0.4 Ampere Weight 58 kg

Condition: excellent (used), Year of construction: 2016, functionality: fully functional, Overbandmagnet for LINDNER URRACO 95. Pgedpfsxur Itox Ahvei Measurements: Total length: 270 cm, Width of the rubber belt: 110 cm

Condition: used, Load magnet / crane magnet TRUNINGER: 1. 2 x 2200 kg. with E-cabinet - 1 piece. Pgsdpfx Asu U I Rcjhvei Pipe bundles - 2 x 850 kg. Bar steel - 2 x 2200 kg. 2. 2 x 850 kg. with E-cabinet - 1 piece. Magnets - 2 x 850 kg. Hooks - 2 x 2000 kg. 3. 2 x 4 ton with E-cabinet - 2 pieces. Magnets - 2 x 4000 kg. Hooks - 2 x 5000 kg.

Condition: used, tank capacity: 13,000 l, GENERAL Equipment: butterfly valve, spray head Design: horizontal Psdpfx Ahjyckl Ijvjgi Notes: 1 manhole approx. 300 x 395 mm in the front bottom; 3 loose bearing shells, Fe; 1 dent at the junction cylinder/front bottom (see photos) Internal diameter: 2,190 mm Total height: 2,550 mm Total length: 4,100 mm Location: Bremen Volume: 13,000 litres Product-contact material: V2A 1.4541 (AISI321) Condition: used Cylindrical length: 3,000 mm Last application: brewery VESSEL Support type: saddles Number of legs: 3 pcs FEATURES Outlet: DN65 DIN 11851

Condition: new, Year of construction: 2026, Diameter: 160mm Also available in the diameters: 180, 200, 250, 300 mm for an additional charge, other diameters on request. Very stable industrial design. Ideal for separating nails/metal parts from material flows. For example after a wood shredder. including 3 extremely powerful magnets * If desired, up to 6 magnets can be installed in the component - surcharge for each additional magnet + 49 € - Neodymium magnets are also available instead of ferrite for an additional charge Your advantages: + Extremely large inspection door with seal for easy stripping of the nails + Stable quick-release fastener +Made in Germany Pgsdpfx Ahschuvrovoi Inspection door / opening: 35x18 cm Installation length may vary

Condition: good (used), The scope of delivery includes: 1x Depth bar, used Material color: raw Total length: approx. 1,110 mm Inner length: approx. 1,102 mm for stand depth: approx. 1,100 mm Clear span: approx. 1,000 mm Profile dimensions: K 140 x 60 x 4 mm Crossbeam support: approx. 52 mm Unit weight: approx. 7.10 kg Pgsdpfx Aewl Ncfjhvei Your contact persons in our company: Mr. Andre Evening Mr. Mario Klöver Mr. Falk Deutsch General information about the item: This item is available for pickup only. Any additional transport or shipping of this item is subject to additional costs, which can be requested separately from us depending on the delivery location and scope of delivery.

Condition: new, Mr: Andre Evering Mr.: Mario Klöver Mr.: Falk Deutsch Included in delivery are 04x shelf support, new Manufacturer: Mauser Material color: sendzimir galvanized material thickness: approx. 1,2 mm total height: approx. 43 mm total width: approx. 11 mm Weight/ pcs. approx. 0,008 Kg General information about the article: This item is offered for pickup only. A desired transport or shipment of this item or a shipment of this item is associated with additional costs, which are separately depending on the delivery location or scope of delivery can be requested from us. Our services at a glance: (prices on request) Assembly, erection our general assembly conditions are to be observed Rack inspection Rack inspection according to DIN EN 15635 executed according to the requirements of BGR 234 visual inspection for all racking systems Pgjdpfjh Iy R Hox Ahvji Delivery with our own fleet (without unloading)

Condition: good (used), The scope of delivery includes: 01x support post, used Material color: blue Pjdpfx Ajk Uufxohvsgi total length: approx. 1.660 mm profile dimension: U: 70 x 30 mm material thickness: approx. 2,00 mm number of drill holes: 02 pcs. Drill hole Ø: approx. 11 mm Base plate dimension: approx. 130 x 130 x 3.00 mm Weight / pcs. : approx. 3,570 kg