Used Support Ribbon Magnet for sale (15,493)

Condition: excellent (used), Machine ready for operation. Ribbon mixer for bulk materials with a capacity of 1200 liters. Dedpfx Aceyg Evve Nocc

Condition: like new (used), Year of construction: 2025, operating hours: 300 h, functionality: fully functional, warranty duration: 6 months, Equipment: documentation/manual, General technical data for Ribbon: Max. mech. speed 3900 Cycles/h Size range: Book Block -min. WxHxT 70* x 110* x 5 mm -max. WxHxT 300 x 390* x 80 mm Ribbon -min. WxL 3 x 200 mm -max. WxL 8 x 530 mm * Size limitations see technical data Connection values: - Electr. requirements: 2 kW - Compressed air requirements: 18 Nm³/h at 6 bar - Air requirements: clean and dry (pressure dew point 10°C below ambient temperature) Net production output depends on paper, material, size, operator and climate conditions, etc. Dedpfjyg Ev Aox Ac Njcc

Condition: good (used), Year of construction: 2005, Electro milling magnet manufacturer: SAV Type:243.77-960X485 Year 2005 with control transformer. Dimensions: 960 mm x 485 mm Height 100 mm Weight approx. 250 kg. Dcodpfswnpkbjx Ac Nsc

Condition: new, Year of construction: 2026, Extremely powerful industrial magnet for iron separation Special price: €990 net (shipping €14.90 net) *Construction lengths can be found in image 2 The active side is equipped with a stainless steel end plate (material 1.4301). Threaded holes are provided on the rear side for mounting; *handle available on request The block magnet systems can be used at temperatures of up to max. +100°C operating temperature. The magnet surface should be cleaned regularly from captured iron parts. Pickup distances for all types, for example: For a steel nut M5: approx. 60 mm For an M5 x 30 screw: approx. 100 mm Djdpfotqfhxex Ac Nocc Mounting example 1: Mounted above a conveyor belt, 'iron parts jump onto the holding surface of the magnet.' Mounting example 2: Mounted within a pipeline system with direct contact to the material flow. For maximum separation safety, a cascade setup of multiple block magnets in series is possible. Assembly and safety instructions: When handling, already upon unpacking and later during installation, ensure that there are no loose iron parts, such as tools or screws, nearby. The magnetic force is so strong that painful injuries may occur if fingers get caught between iron parts and the active surface. There should be no steel parts under the active surface within a minimum distance of 400 mm.

Condition: new, (made by N & N) new ! all stainless steel capacity 300 L. (= ± 10CF) 3 x 400V, 5,5kW double Ribbon mixing arm dimensions: (l x w x h) : ± 1.900 x 670 x 1.740 mm (open lid : ± 2.140 mm) outfeed height : ± 720 + 20 mm Dcsdpfewm Hz Ijx Ac Njc safety lid CE-approved adjustable speed 2 mixing directions 5,5 kW Digital – touch screen with programs Perfectly suitable for dry products, such as: spices, ingredients, powders,…

Condition: excellent (used), For sale: Gaussmeter MAGSYS HGM09s from the renowned manufacturer MAGNET SYSTEME (MAGSYS) – a professional magnetic field meter designed for industrial, service, and laboratory applications. This device is used for precise measurement of magnetic induction (mT / mG) and is widely used in quality control, maintenance, diagnostics of magnetic separators, magnetic grippers, permanent magnets, as well as laboratory applications. — Djdpfsydfvkox Ac Nocc Technical condition • Fully functional equipment, powers on correctly • Clear display, responds to magnetic field • Normal signs of use • No information on current calibration (user calibration may be required if necessary) — Included in the set • MAGSYS HGM09s gaussmeter • 2 MAGSYS magnetic probes • Complete cabling • USB memory stick • Original transport case • Exactly what you see in the photos — Main features • DC magnetic field measurement • Units: mT / mG • Functions: AUTO, HOLD, ZERO (NULL), manual/automatic ranges • Data logging and retrieval capabilities • Robust, industrial-grade construction • Suitable for B2B / laboratory applications — Applications • Maintenance • Industry and manufacturing • Quality control • Magnetic separators and systems • Laboratories and technical services

Condition: used, Conveyor belt, belt conveyor, magnetic conveyor belt NEUHÄUSER Type 1700 x 50 / 1,060 + 110S Year of manufacture: approx. 2003 Usable length: 1700 mm Belt width: 50 mm Belt length: 3700 mm Aluminium frame profile cross-section H x W: 60 x 80 mm Roller diameter drum motor: 110 mm Roller width drum motor: 250 mm Dcjdpfxoxcbppo Ac Njc Belt speed: approx. 30 m/min. Motor power: 0.22 kW Power connection: 400 Volt, 50 Hz - Drive via drum motor BDL Type 110S - Magnetic rail under belt conveyor - Belt body made of aluminium system profile with 12 mm slot - 1 piece conveyor belt NEW 3700 x 50 mm - Front frame profile slightly damaged (see photo), no impact on function - Guide at front reversing roller broken off (see photo) Overall dimensions L x W x H: 1820 x 370 x 120 mm Weight: approx. 30 kg

Condition: refurbished (used), Year of construction: 2008, Doppstadt DZ 750 Kombi - Year of manufacture: 02/2008 - Pre-shredder roller with 21 teeth - 2 x overband magnet - Central lubrication - Remote control - Mercedes Benz engine 480 kW (652 HP) at 1,900 rpm - Weight 46,000 kg - Secondary shredding rotor with 36 free-swinging hammers Dcedsygnbbspfx Ac Nec - Screen basket 120 mm (other screen baskets available) - Rear discharge belt 7 m - Rotor with 36 hammers Machine is overhauled and immediately available.

Year of construction: 2000, condition: new, 3x supply system for mechanical seals / pressure tank Manufacturer: Fluiten Material: Stainless steel (1.4301) Year of manufacture: 2000 Volume: 12L Pressure (max.): 16 bar Temperature (max.): 99 °C Height: 430 mm (without manometer) Diameter: 219 mm Dcedpfsd Tqz Tex Ac Noc Incl. thermometer, manometer and sight glass Condition: new and unused, partly original packed Connections: see drawing The tank can be visited after arrangement at any time gladly in 76694 Forst.

Condition: used, length 1200 mm width 500 mm floor-plate height 105 mm weight of the machine ca. 400 kg Electric magnetic plate from WAGNER, a transformer is required for operation / Dsdpetq I Rqjfx Ac Nocc Rectifier required. 110 volts, 2.86 amps. Reduced special price. Machine dealer with own stock of 1600 m².

Condition: used, Unloading at the bottom Djdjycqrujpfx Ac Njcc 2 engines (2 x 37 kW) dimensions (lxwxh): ± 7.300 x 2.280 x 2.600 mm dimensions bowl (lxwxh): ± 4.500 x 2.120 x 1.350 mm suitable for steam injection (double-walled)

Condition: excellent (used), Electromagnetic clamping plate (28490) Length 500 mm width 250 mm Dcsdpfx Aotrngpjc Noc height 75 mm Voltage 90 Volt 0.4 Ampere Weight 58 kg

Condition: excellent (used), Year of construction: 2016, functionality: fully functional, Overbandmagnet for LINDNER URRACO 95. Measurements: Total length: 270 cm, Width of the rubber belt: 110 cm Dodpfx Acjxur Ite Nscc

Condition: used, tank capacity: 13,000 l, GENERAL Equipment: butterfly valve, spray head Design: horizontal Notes: 1 manhole approx. 300 x 395 mm in the front bottom; 3 loose bearing shells, Fe; 1 dent at the junction cylinder/front bottom (see photos) Internal diameter: 2,190 mm Total height: 2,550 mm Total length: 4,100 mm Location: Bremen Volume: 13,000 litres Product-contact material: V2A 1.4541 (AISI321) Condition: used Cylindrical length: 3,000 mm Dcsdpfjyckl Iox Ac Noc Last application: brewery VESSEL Support type: saddles Number of legs: 3 pcs FEATURES Outlet: DN65 DIN 11851

Condition: used, tank capacity: 1,350 l, GENERAL INFORMATION Design: Suspended Remarks: Various technical documents available; the tanks were suspended at the previous owner’s facility in a ring with load cells, which was embedded in the floor (one ring per tank is included in the delivery; see photos) Speed: 412 rpm External diameter: 1,250 mm Internal diameter: 1,000 mm Overall height: 2,650 mm Heating/Cooling: available Insulation: available Power rating: 0.75 kW Max. permitted operating temperature: 140 °C Max. permitted operating overpressure: 6.0 bar Max. overpressure: 3.0 bar Agitator: Magnetic stirrer Location: Bremen Technical documentation: Drawing Cylinder temperature control: Half-pipe coil Nameplate: Vacuum: 1.0 bar Volume: 1,350 litres Double jacket volume: 80.0 litres Product-contact material: V4A 1.4435 (AISI 316) Condition: used Cylindrical height: 1,460 mm Last application: pharmaceuticals Dedpoxxiccjfx Ac Njcc TANK Max. permitted operating temperature: 130 °C HEATING/COOLING JACKET Max. permitted operating vacuum: 1.0 bar Bottom temperature control: Half-pipe coil INSULATION Insulation material: mineral wool EQUIPMENT Manhole / access cover: in top head Discharge: present Discharge outlet: 50 mm MATERIAL SPECIFICATION Temperature control system material: V2A 1.4541 (AISI 304) AGITATOR 1 Agitator manufacturer: MAVAG AG Voltage: 230/400 V Agitator arrangement: bottom mounted TECHNICAL DATA / DIMENSIONS Top head wall thickness: 4.5 mm

Condition: like new (used), The Guelt magnetic destacker is used to automate the loading and unloading of rigid containers (metal, glass) from their baskets on production lines, using permanent magnet plates to handle entire layers of products. It is ideal for industrial processes, ensuring efficient and safe handling without damaging the containers. Cage dimensions: Dodpfx Acjyf A T Ae Nscc - Option 1: 81 cm x 76.5 cm x 76 cm. - Option 2: 84 cm x 84 cm x 84 cm.

Condition: good (used), machine/vehicle number: 125565-01, Year of construction: 2012, Offer 25501 Self-supporting – mobile / relocatable - column slewing crane Technical data (approx.): - Load capacity: 500 kg - Electric chain hoist DEMAG DC–ComA 5, year 2020 - Lifting speeds: 4.5 + 1.1 m/min - Jib reach: approx. 2000 mm Dodpfoyf A Rbjx Ac Njcc - Crane girder IPE 180 - Hook height: approx. 2400 mm - Slewing radius: 360° - Undercarriage beneath base for moving the entire crane - Total height: approx. 3100 mm - Base footprint (pillar / base): approx. 1050 x 1050 mm - Overall length: approx. 2600 mm - Dimensions with undercarriage: approx. 1400 x 1050 mm - Total weight: approx. 3500 kg

Condition: ready for operation (used), Lenoir Electro Magnetic Conveyor Belt Brand: Lenoir Dim. Belt Conveyor: A-A = 2700 mm Beltwidth: 1200 mm. Driving: 3 kW Gearbox Dim. Block : L= 1800 x W=1200 x H=450 mm Power Block = 10 kW Dcjdpfx Acew Dxrao Nsc Including new rectifier.

Condition: used, 3700mm long, 960mm high, and adjustable Dsdpfxov Dauqj Ac Nocc Storage location: Nattheim

Condition: new, Year of construction: 2026, Diameter: 160mm Also available in the diameters: 180, 200, 250, 300 mm for an additional charge, other diameters on request. Dsdpfschuvrex Ac Necc Very stable industrial design. Ideal for separating nails/metal parts from material flows. For example after a wood shredder. including 3 extremely powerful magnets * If desired, up to 6 magnets can be installed in the component - surcharge for each additional magnet + 49 € - Neodymium magnets are also available instead of ferrite for an additional charge Your advantages: + Extremely large inspection door with seal for easy stripping of the nails + Stable quick-release fastener +Made in Germany Inspection door / opening: 35x18 cm Installation length may vary

Condition: good (used), The scope of delivery includes: 1x Depth bar, used Material color: raw Total length: approx. 1,110 mm Inner length: approx. 1,102 mm for stand depth: approx. 1,100 mm Clear span: approx. 1,000 mm Profile dimensions: K 140 x 60 x 4 mm Crossbeam support: approx. 52 mm Unit weight: approx. 7.10 kg Your contact persons in our company: Mr. Andre Evening Mr. Mario Klöver Mr. Falk Deutsch Dedpfx Ajwl Ncfec Nocc General information about the item: This item is available for pickup only. Any additional transport or shipping of this item is subject to additional costs, which can be requested separately from us depending on the delivery location and scope of delivery.

Condition: new, Mr: Andre Evering Dsdpoh Iy R Hsfx Ac Njcc Mr.: Mario Klöver Mr.: Falk Deutsch Included in delivery are 04x shelf support, new Manufacturer: Mauser Material color: sendzimir galvanized material thickness: approx. 1,2 mm total height: approx. 43 mm total width: approx. 11 mm Weight/ pcs. approx. 0,008 Kg General information about the article: This item is offered for pickup only. A desired transport or shipment of this item or a shipment of this item is associated with additional costs, which are separately depending on the delivery location or scope of delivery can be requested from us. Our services at a glance: (prices on request) Assembly, erection our general assembly conditions are to be observed Rack inspection Rack inspection according to DIN EN 15635 executed according to the requirements of BGR 234 visual inspection for all racking systems Delivery with our own fleet (without unloading)

Condition: good (used), The scope of delivery includes: 01x support post, used Material color: blue total length: approx. 1.660 mm profile dimension: U: 70 x 30 mm Dedpfx Ask Uufxjc Nocc material thickness: approx. 2,00 mm number of drill holes: 02 pcs. Drill hole Ø: approx. 11 mm Base plate dimension: approx. 130 x 130 x 3.00 mm Weight / pcs. : approx. 3,570 kg

Condition: good (used), Technical specifications for the deck support bar: Djdsw Hfnmepfx Ac Nscc Manufacturer: META (Thyssen) Items included: 01x deck support bar, used Design: recessed for 38mm chipboard Material colour: orange Overall length: approx. 1,115 mm Inner length: approx. 1,103 mm Frame depth: approx. 1,100 mm Clear support span: approx. 1,000 mm Profile dimensions: 85 x 50 mm Beam support width: approx. 51 mm Weight: 4.90 kg / pc. Your contacts at our company: Mr. Andre Evering Mr. Mario Klöver Mr. Falk Deutsch General information about this item: This item is offered for collection only. If transport or shipping is required, additional costs will apply. These costs depend on the delivery location and order size and can be quoted upon request.

Condition: good (used), The scope of delivery includes: 1x Depth bar, used Material color: raw Total length: approx. 1,110 mm Inner length: approx. 1,102 mm for stud depth: approx. 1,100 mm Clear span: approx. 1,000 mm Profile dimensions: K 100 x 50 x 4 mm Crossbeam support: approx. 52 mm Unit weight: approx. 5.42 kg Your contact persons in our company: Mr. Andre Evening Dcjdjwl Ullspfx Ac Noc Mr. Mario Klöver Mr. Falk Deutsch General information about the item: This item is available for pickup only. Any additional transport or shipping of this item is subject to additional costs, which can be requested separately from us depending on the delivery location or scope of delivery.