Used Stitchliner 5500 for sale (481)

Condition: like new (used), Year of construction: 2024, functionality: fully functional, machine/vehicle number: MY2340CX03, warranty duration: 6 months, 🔬 High-quality laboratory instrument – Fourier Transform Infrared (FTIR) Spectrometer 📌 Key Details: Model: Agilent 5500a FTIR Compact design, ideal for routine laboratory analysis Advanced infrared technology for chemical and material identification Comes with original software pre-installed on a dedicated laptop Condition: Like new / barely used, fully functional Typical applications: chemical analysis, pharmaceuticals, food industry, polymers, and research laboratories 📦 Included: Agilent 5500a FTIR main unit Dedicated laptop with FTIR software installed Standard accessories and power cables User manual/documentation ⚖ Shipping Information: Lredpexfa R Rjfx Aftjp Weight: ~50 lbs → 800 oz (including laptop) Dimensions (L×W×H): 26 × 18 × 12 in Carefully packaged for safe shipping

Condition: excellent (used), Year of construction: 2015, operating hours: 1,884 h, PROD. BRAND TYPE MSA 15 500AD2000 S/N CAI857781 YEAR 2015 POWER (kW) 15 CAPACITY (m3/min) 1.79 PRESSURE (bar) 10 HOURS (LOAD/TOTAL) 1884/8665 FREQUENCY INVERTER no BUILT-IN DRYER yes Lrsdoyi A Arspfx Aftsp HEAT EXCHANGER no COOLING (AIR/WATER) air ON TANK yes, 500 l DOCUMENTATION yes NEW/USED USED

Year of construction: 2011, condition: refurbished (used), functionality: fully functional, !!! Calibrated, we have two units in stock - price is for one unit only !!! Lrodpfjxbdyhjx Aftep Overall Dimensions - inches (mm): Model NU-5500/E Height: Exterior: 39.5 Inches (1003.3mm) Width: 25.5 Inches (647.7mm) Depth: 26.5 Inches (673.1mm) Height: Interior: 25.5 Inches (647.7mm) Width: 21.5 Inches (546.1mm) Depth: 21.0 Inches (533.4mm) Shelf Capacity: Size: 19.25 Inches (489mm) x 19.25 Inches (489mm) Performance Parameters - Temperature Range: 18°C to 55°C (5°C above ambient to 3°C ambient max.) - Temperature Uniformity: +0.3°C at 37°C. - Temperature Accuracy: +0.1°C. - CO2 Range: 0.1 to 20%. , CO2 Accuracy: +0.1% , CO2 Recovery: Up to 5% +0.2% in 4 minutes. - Temperature Recovery: 0.3°C/min. (Average) - Temperature Display Resolution: 0.1°C , CO2 Display Resolution: 0.1% - Door and Perimeter Heater Control Logic: Proportional 0-100% (adjustable) , Door & Perimeter Heater Duty cycles are processor controlled. , Temperature Sensor Type: Precision Integrated Circuit - CO2 Control Logic: Fixed Algorithm/Manual Environmental Adaptable. , CO2 Sensor Type: Infrared , Connectors on rear panel are provided for chart recorder, remote alarm, and printer connection.

Year of construction: 2024, condition: new, functionality: fully functional, machine/vehicle number: CO2-1125-5000, 1x Vacuum Belt Filter Completely constructed in stainless steel 1.4404/1.4571, grates in stainless steel 1.4301 Finish: pickled and passivated Including: 1x drive roller 508x1427 1x steering roller 88.9x1850 6x support/tension rollers 88.9x1850 Lodpfsxfvahex Afterp 1x VBF frame 1x VBF hood frame 1x safety grilles (1.4301) 2x spray pipes, each fitted with 12 nozzles 6x hood brackets for vacuum tube 1x mounting materials, incl. gaskets 1x holder for control valve and paddle 2x slide blocks for tension roller HMPE100 2x bearing blocks for scraper blade HMPE100 1x scraper blade HMPE100 1x drive SEW KH87/T R57 DRN90L4TF 2x bellows d100 wbz 100-E1 2x misalignment switches 2x emergency stop switches 2x emergency stop cords 1x pressure reducer 1x hose and coupling for connection to bellows 23x nozzle holders 23x nozzles 4x rubber seals for wash cabinet 1x rubber seal for suspension conveyor 2x double wash gutters

Condition: ready for operation (used), Year of construction: 2017, Demag Overhead Crane Double-Girder Suspension Bridge Crane Inspection logbook available! Double-Girder Suspension Crane: Manufacturer: Liebl Kranbau GmbH Load capacity: 500 kg Year of manufacture: 2017 Crane track gauge: 4500 mm Length: approx. 6 m Width: approx. 5.13 m Chain Hoist: Manufacturer: Demag Lredpfx Ajx Eikysftjp Model: DC-COM 5-500 Year of manufacture: 2017 Lifting capacity: 500 kg Fine lift speed: 1.1 m/min Main lift speed: 4.5 m/min Hook path: 4 m You are welcome to visit for an inspection. We can also organize affordable shipping for you! You will receive a proper invoice. For international customers, a net invoice can be issued, provided you have a valid VAT ID number. Subject to prior sale. Visit our shop and check out our other offers. Brand names and trademarks mentioned are the property of their respective owners and are used solely for identification and description of the products. Technical data may deviate and errors in the item description can occur and are subject to change.

Condition: reconditioned (used), Year of construction: 2017, operating hours: 1,651 h, functionality: fully functional, machine/vehicle number: G393, operating pressure: 500 bar, total length: 1,175 mm, total height: 945 mm, total width: 760 mm, pressure: 500 bar, type of input current: three-phase, empty load weight: 290 kg, input voltage: 400 V, power: 15 kW (20.39 HP), input current: 32 A, noise level: 78 dB, pressure (max.): 500 bar, input frequency: 50 Hz, water pressure: 500 bar, Dear Sir or Madam, For sale is an overhauled Falch WheelJet 15 Electric without accessories. Lrsdpfjxugifex Aftsp 500 bar 15 l/min 32A plug Best regards, STS-Reinigungstechnik Team

Condition: good (used), DIGI SM-5500B System Scale SM-5500B, the advanced PC-based system scale printer that provides you with multiple retail solutions. Increases operational turnover, improves operations with integrated queuing and collection system through various innovative features of SM-5500B. Experience true retail solutions offered by DIGI's PC scales. Ledpfjk Shm Tox Aftsrp - Linerless printing with integrated automatic cutter - Watermark printing - Speed ID - InfoTag and electronic signage e.Label - Integrated queuing and collection system - Waste management - Interactive screen display Power source 230 V (50/60 Hz.) Operating humidity 15% - 85% RH Non-condensing Operating temperature -10° C to +40° C Operator Display 12.1" Customer display 7 "WVGA (800x480) Interface RS232C, Ethernet (standard) max. 15/30 kg, min. 100g, e = 5/10g, dimensions (in mm) 385(W) x 507(D) x 148(H) Item condition: used Photo is purely indicative More items - new and used - you will find in our store! International shipping costs on request!

Condition: used, Year of construction: 2017, Horizon HOF-400, fully automatic feeder, used. This robust, fully automatic feeder was specially developed for the offline production of digitally printed booklets in conjunction with the SPF-200A, SPF-200L booklet making units, the StitchLiner 5500 and other optional additional devices. The sheets are removed sheet by sheet, checked, grouped and fed to the downstream unit in a block. Mark reading ensures reliable grouping and the production of brochures in different sizes. Special features: - Maximum flexibility at an extremely attractive price-performance ratio - Reliable paper feed thanks to suction belt feed Lrodpjyzgamofx Aftep - Extremely short set-up times thanks to fully automatic format adjustment - Extremely easy operation and set-up in seconds thanks to TOUCH&WORK technology - Economical processing of small and medium volumes in top quality Technical specifications: - Infeed format 4-sided sheets min. 203 x 203 mm, max. 610 x 356 mm (depending on downstream unit) - Paper thickness 50 - 160 g/sqm for normal paper / 70 - 160 g/sqm for coated paper - Loading capacity max. 620 mm - Speed A3 format max. 25,000 sheets/h - A4 format speed max. 35,000 sheets/h / max. 45,000 sheets/h (landscape) - Weight 782 kg (with front cutter FC-200A) - Machine dimensions 960 mm x 1,050 mm x 936 mm (LxWxH) - Power supply 400 V 1.8 A, 1.0 kW All-Inclusive Service Package We take care of everything: from secure packaging and transportation to customs clearance. Sustainable and Economical Choose a used machine and benefit twice: Save the environment and your budget. Despite possible signs of use, you receive a quality product at an attractive price.

Year of construction: 2012, condition: used, offer consist of: - cover feeder incl. Banding Agrama AG-215 cross-feeder - Product strength: 1 bis 15 mm - format: Max. 470 x 310 mm; Min. 140 x 100 mm - Leistung: Max. 11.000 Takte/h - Stacking height: Max. 210 mm - Inlet height: 800 bis 1.000 mm Ledsxtnckopfx Aftsrp - Display height: 800 bis 900 mm Connectivity: - Horizon saddle stitcher StitchLiner 5500 Horizon booklet maker of the SPF-series. - Horizon folder of the series AFC-56x, AF-566, AFC-74x. - Air requirement: 6 bar 150 Nl/min (alternative compressor available) - power: 400V rotating current, 1,2 kW - dimensions: Länge 2.190; Breite 1.720 mm We can also organize the following for you: packaging, loading, transport ( by ship or plane) including customs

Condition: used, Year of construction: 2022, Horizon HOF-400, fully automatic feeder, used. This robust, fully automatic feeder was specially developed for the offline production of digitally printed booklets in conjunction with the SPF-200A, SPF-200L booklet making units, the StitchLiner 5500 and other optional additional devices. The sheets are removed sheet by sheet, checked, grouped and fed to the downstream unit in a block. Mark reading ensures reliable grouping and the production of brochures in different sizes. Special features: Lredpfeu Tfupex Aftsp - Maximum flexibility at an extremely attractive price-performance ratio - Reliable paper feed thanks to suction belt feed - Extremely short set-up times thanks to fully automatic format adjustment - Extremely easy operation and set-up in seconds thanks to TOUCH&WORK technology - Economical processing of small and medium volumes in top quality Technical specifications: - Infeed format 4-sided sheets min. 203 x 203 mm, max. 610 x 356 mm (depending on downstream unit) - Paper thickness 50 - 160 g/sqm for normal paper / 70 - 160 g/sqm for coated paper - Loading capacity max. 620 mm - Speed A3 format max. 25,000 sheets/h - A4 format speed max. 35,000 sheets/h / max. 45,000 sheets/h (landscape) - Weight 782 kg (with front cutter FC-200A) - Machine dimensions 960 mm x 1,050 mm x 936 mm (LxWxH) - Power supply 400 V 1.8 A, 1.0 kW All-Inclusive Service Package We take care of everything: from secure packaging and transportation to customs clearance. Sustainable and Economical Choose a used machine and benefit twice: Save the environment and your budget. Despite possible signs of use, you receive a quality product at an attractive price.

Condition: used, Horizon PK-30 Preset Kicker, used This small device has the following functions for various Horizon booklet making systems: - It separates a batch of booklets at a preset number Lodpfx Afjw Ew Atetorp - According to a preset number, a booklet is shifted to easily identify and separate the end of a series - The PK-30 Preset Kicker can be used with various Horizon systems, including the StitchLiner 5500 or StitchLiner 6000

Condition: excellent (used), Year of construction: 2010, Column jib crane, overhead crane, workstation crane -Manufacturer: Demag, Column jib crane type D-MS360, lifting capacity 3200 kg -Base plate: Ø 810 mm -Load capacity: 3200 kg -Chain hoist: Demag type 2M EKDR 3, year of manufacture 2010 -2x lifting speed: 6.0/1.0 m/min -Drive system: yes Ledpfx Ajzpaq Eoftsrp -Swivel drive: yes -Projection: 4480 mm -Total height: 5060 mm -Hook height: 5040 mm -Swivel range: 360° -Transport dimensions: 1200/5500/H2260 mm -Empty weight: 1850 kg

Condition: used, Table unit from a DROOP & REIN portal milling machine Clamping plate with T-slots made of cast steel gray cast iron Table unit with clamping plate and very solid guideway Table clamping surface 5500 x 2000 mm Lodpfx Afjthuzpjtjrp Travel of the table clamping plate approx. 3100 mm Table height 1050 mm Table load: max. 20 tons Ball screw: Ø 100 mm Thread pitch: 20 mm (single-start) - Processing table guided very stably on the bed - Metal telescopic guideway cover - comes from a DROOP & REIN portal milling machine - Longitudinal table movement via ball screw and SIEMENS servo motor - Clamping surface with 11 T-slots 28 mm - Drive via SIEMENS 1FT6134-6AB71-1AG2 servo motor with IC200448S/R encoder (RN 000 B25) Total length 9500 mm Width 2000 mm Overall height 1050 mm dead weight 28 ton. good condition

Condition: ready for operation (used), Electric crane Fabr.ROBUR Type: P40E, year 1986, 2200 operating hours. Max. lifting capacity 5500 kg. Includes charger, 48V batteries. Ready for operation. Lodpfx Aoyf Uzleftorp

Condition: used, Year of construction: 2013, 2013 | Batmatic VR70DH | Used Hand compactor 📍Location: France 🚛 Delivery available to your destination – Use our shipping calculator to estimate transport costs! 💰 Buy Now for EUR 5500 or Make an Offer. Payment at delivery available for an affordable fee (subject to approval)* 👷‍♂️ Inspected by an independent expert 0 inspection points 0 approved ✅ 0 imperfect ℹ️ 0 issues ⚠️ Lrjdpfx Afeznbhvetjp 📌 Inspector's Comment: Machine very little used, almost new, no hour meter. 📄 Want to see the full inspection, extra photos, or a video? Tip: The reference "40924 Equippo" is commonly used when looking up more details online. 💡 Why this machine and our service stands out: ✔ Thorough inspection by professionals ✔ Jobsite delivery available ✔ Money-Back Guaranteed ✔ Secure and flexible payment options 🔄 Considering other equipment options? We offer helpful tools and resources for all equipment owners and operators – easily accessible on our platform.

Condition: ready for operation (used), Year of construction: 2022, Panel saw manufactured in 2022. This FELDER K 945S features a maximum cutting height of 155 mm and a maximum cutting width of 1250 mm. It includes a sliding table with a cutting length of 2800 mm and a powerful 5.5 kW main saw motor. If you are looking to get high-quality cutting capabilities, consider the FELDER K 945S panel saw we have for sale. Contact us for further details. • FELDER K 945 S sliding table saw • Manual blade angle adjustment with angle display and handwheel • Tilting saw unit 90°–45° • Blade diameter range: 250–450 mm • Maximum cutting height: 155 mm • Electric height adjustment • Maximum cutting width: 1250 mm • Main saw motor 5.5 kW (7.5 HP), 3x400 V, soft start, CE brake • Three spindle speeds: 3500 / 4500 / 5500 rpm • PCS (Preventive Contact System) safety system with optical status indicator; resettable after activation • Antistatic belt for PCS system • Sliding table, cutting length 2800 mm, anodized aluminum • 10-year warranty on the X-Roll sliding table system • Parallel fence with round guide bar, D = 50 mm • Rip fence 2600 mm with clamping system for extension table 1300/1500 • Extension table for cutting lengths 2500–3200 mm • Support surface: 1150 x 640 mm • Crosscut fence 3200 mm with 2 flip stops • Overhead guard for 1250 mm cutting width with 100 mm dust extraction connection • Machine stand for K 945 S, cast iron saw table; operating tools included • User manual in Czech • Additional warranty: 3 years on machine parts (valid when commissioned by an authorized FELDER technician) • Transport packaging for sliding table • Standard pallet: 2100 x 1500 x 1500 mm Additional equipment • Dust extraction system: • Mobile dust extractor AF 22 • 4.0 HP (3.0 kW), 3x400 V, 50/60 Hz • Standard dust filter • Connection ports: 120 mm and 80 mm • Dust extraction hoses: • 4 x industrial extraction hose H/SE Ø120 mm • 4 x industrial extraction hose H/SE Ø100 mm • Heavy-duty, abrasion-resistant, flame-retardant; smooth internal surface • Spare parts included: • Adjustable support rail (106ND) • Cross roller rail plate (Fen-Grau) • Clamp rail lower section • Compression spring • Clamp rail upper section Ledpfx Aezdka Tjftjrp • Additional machine spare part (222MB)

Condition: used, Upright: 5000 × 1500 mm, 17 pcs Upright: 5500 × 1300 mm, 8 pcs Upright: 3500 × 1100 mm, 5 pcs Ledpfxjxcua Us Aftjrp Upright: 5500 × 510 mm, 3 pcs Upright column: 5000 mm, 11 pcs Beam: 1350 × 65 mm, 199 pcs Beam: 1350 × 60 mm, 19 pcs Carriage rail: 8650 mm, 28 pcs Carriage rail: 7860 mm, 12 pcs Carriage rail with end cap: 6000 mm, 40 pcs Carriage end piece: 40 pcs Upright brace: 1400 mm, 70 pcs 1 carriage + charger + remote control

Condition: new, Year of construction: 2026, This planer is designed for soft and hard wood. Its robust cast iron design ensures silent and vibration-free operation. Switching from planing to thicknessing is very quick and simple. It is based on unlocking eccentrics and lifting tables, as well as relocating chip extractor cover A handwheel for planing thickness is located on the right side of the machine An aluminium swinging rule with a graded pitch can be precisely set at an angle within 90–45o Thicknesser table mounted centrally on a column, equipped with a handwheel for upward and downward setting Planing height measured with a graded strip Technical data Knife shaft diameter 70 mm Knife shaft speed 5500 rpm Extracting connector diameter 120 mm Swinging rule tilt angle 0–45° Number of knives 3 Maximum planer width 410 mm Maximum thicknesser width 408 mm Lrsdpfovxh T Dex Aftop Maximum planing height 5–225 mm Maximum thicknesser machining depth 3.5 mm Maximum planer machining depth 4 mm Thicknesser feed speed 6 m/min Planer table dimensions (L×W) 1640×410 mm Weight 280 kg Motor speed 2800 rpm Motor power s1 4.0 kW s6 5.6 kW Power supply 3-phase, 400V

Condition: new, Year of construction: 2026, This planer is designed for soft and hard wood. Its robust cast iron design ensures silent and vibration-free operation. Switching from planing to thicknessing is very quick and simple. It is based on unlocking eccentrics and lifting tables, as well as relocating chip extractor cover A handwheel for planing thickness is located on the right side of the machine An aluminium swinging rule with a graded pitch can be precisely set at an angle within 90 – 45o Thicknesser table mounted centrally on a column, equipped with a handwheel for upward and downward setting Planing height measured with a graded strip Technical data Knife shaft diameter 70 mm Knife shaft speed 5500 rpm Extracting connector diameter 120 mm Swinging rule tilt angle 0–45° Number of knives 3 Maximum planer width 310 mm Maximum thicknesser width 308 mm Maximum planing height 5–225 mm Maximum thicknesser machining depth 2.5 mm Maximum planer machining depth 4 mm Thicknesser feed speed 6 m/min Ljdjvxh Rvspfx Aftjrp Planer table dimensions (L×W) 1300×310 mm Weight 250 kg Motor speed 2800 rpm Motor power s1 3.0 kW s6 4.2 kW Power supply 3-phase, 400V

Condition: new, Year of construction: 2026, The CORMAK PT310ET planer–thicknesser is an advanced woodworking machine that combines the functionality of a jointer and a thickness planer in one robust construction. It stands out with exceptional stability, high working power, and features that increase precision and operator comfort, such as additional feed rollers integrated into the thicknessing table. Key Advantages S6 motor power: 2.8 kW (S1: 2.2 kW) – one of the most powerful in its class, ensuring consistent performance even under heavy loads. Stable 180 kg construction – rigid cast-iron tables and additional rubber-coated feet minimize vibrations and increase precision. Quick mode switching – fast change from jointer to thicknesser by lifting the tables and repositioning the chip-extraction hood. Smooth and quiet operation – low noise emission and accurate material feed ensure operator comfort and safety. Efficient extraction system – Ø120 mm outlet allows effective chip removal, especially during intensive use. Unique Benefit: Feed Rollers in the Thicknesser – specially designed auxiliary roller extensions integrated into the thicknessing table support the machining of long and heavy workpieces, making feeding and collecting easier while improving surface finish quality. Applications Carpentry and furniture workshops – for daily, efficient machining of solid wood and laminated boards. Production of structural components – ideal for flattening and calibrating construction elements, stairs, frames, and mouldings. Technical schools – for training in professional woodworking using high-quality industrial equipment. Standard Equipment Three HSS knives, 310 × 25 × 3 mm Cutterhead guard Cast-iron jointer tables Ø120 mm dust-extraction outlet Feed switch and emergency STOP switch Operating manual (DTR) CE declaration of conformity Technical Specifications Cutterhead diameter: 75 mm Cutterhead speed: 5500 rpm Dust port diameter: 100 mm Fence tilt angle: 90–45° Number of knives / dimensions: 3 / 310 × 25 × 3 mm Maximum jointer width: 310 mm Maximum thicknesser width: 308 mm Planing height range: 5–225 mm Maximum depth of cut (thicknesser): 2.5 mm Maximum depth of cut (jointer): 4 mm Thicknesser feed speed: 6 m/min Jointer table dimensions (L × W): 1300 × 310 mm Gross weight: 180 kg Motor speed: 2800 rpm Motor power: S1: 2.2 kW / S6: 2.8 kW Power supply: 400 V, 5-pin socket, 16 A Manual (DTR): Polish/ English Lrsdpfx Aexy Hy Ujftsp CE declaration: yes

Condition: used, total height: 1,000 mm, total length: 11,500 mm, total width: 2,450 mm, - Documentation available: No - CE certificate present: No - Lifting capacity [kg]: 5000 - Lifting height [mm]: 5500 - Span [mm]: 11300 - Girder: Single - Crane control: Fixed cable - Dismantled: Yes - Transport dimensions: 11500mm x 2450mm x 1000mm (l x w x h) - Transport packages [pcs.]: 1 Financial information VAT: The price shown is exclusive of VAT VAT/margin: VAT deductible for entrepreneurs Delivery and trade-in always possible for everything in the industrial sectors Lsdpfxszmd T Ee Aftsrp Lukas van Rossum

Condition: used, Year of construction: 1999, functionality: fully functional, turning length: 497 mm, turning diameter: 300 mm, travel distance X-axis: 180 mm, travel distance Y-axis: 100 mm, travel distance Z-axis: 575 mm, Mazatrol PC Fusion CNC 640T CNC control 3-jaw chuck 12-fold revolver C-axis driven tools Y-axis tool presetting device (tool eye) tail stock chip conveyor coolant device bar loading device for 3m bars Technische Daten: / technical details max. Dreh-Ø / max. turning Ø 300 mm max. Schwing-Ø / max rotary-Ø 525 mm max. Drehlänge / max. turning length 497 mm Drehzahl / spindle speed 35-4000 UpM/ rpm Anzahl der Revolverplätze / numbers of tool places 12 X-Verfahrweg / x-travel 180 mm Z-Verfahrweg / z-travel 575 mm Y-Verfahrweg / y-travel +-50 mm Futterdurchlass / spindle hole diameter 62 mm Eilganggeschwindigkeit X, Z / rapid feed X, Z 30, 30 m/min. Ledpezmd Tljfx Aftorp Gewicht der Maschine ca. / weight ca. 5500 kg Technische Daten, Zubehör und Beschreibung der Maschine sind unverbindlich - Technical data, accessories and description of the machine are not binding.

Condition: excellent (used), functionality: fully functional, machine/vehicle number: FN527832, Year of construction: 2016, operating hours: 6,070 h, load capacity: 1,600 kg, lifting height: 5,500 mm, free lift: 2,415 mm, load center: 500 mm, fuel type: electric, mast type: triplex, construction height: 2,415 mm, power: 9 kW (12.24 HP), motor manufacturer: Jungheinrich, gearing type: automatic, battery manufacturer: Jungheinrich, battery model: 48V 6 PzS 750 Ah (Bj. 11/2025), battery capacity: 750 Ah, battery voltage: 48 V, battery weight: 1,013 kg, DGUV certified until: 04/2027, fork length: 1,800 mm, tire condition: 95 %, front tire type: superelastic tires (black), rear tire type: cushion tires (black), overall weight: 3,200 kg, empty load weight: 2,431 kg, total height: 2,415 mm, color: yellow, Equipment: CE marking, UVV, lighting, pallet forks, sideshift, Price: €13,500 net €16,065 gross SKU: 780 Basic Information: Lrodpfey Hx Awjx Aftop - Manufacturer: Jungheinrich - Model: EFG 216 - Year of manufacture: 2016 - Operating hours: 6070 h Technical Specifications: - Drive: Electric - Transmission: Electric - Pedals: Single-pedal control - Control: Solopilot - Battery: 48V 6 PzS 750 Ah (year: 11/2025) - Charger: Included Mast / Dimensions: - Overall height: 2415 mm - Lifting height: 5500 mm - Free lift: 1825 mm - Mast type: Triplex mast - Fork length: 1800 mm - Rated load capacity: 1,600 kg - Load center: 500 mm Tyres: - Type: Super elastic tyres (SE) NEW Hydraulic Equipment: - Sideshift: Integrated - Fork positioner: No - Rotator: - Additional hydraulics: ZH 1 Equipment: - Cab: Front and roof window - Lighting: 2x ASW rear, 2x ASW front - Safety equipment: Seat belt, Bodyguard, Blue Spotlight rear - Heating: No Extras: - UVV inspection available on request - Ready for immediate use - Inspection and test drive welcome by appointment on site. Transport: Cost-effective shipping available on request. Invoice with VAT: You will always receive an invoice with VAT shown separately. Battery: For battery-powered equipment, we are happy to provide a quote including a new battery. Contact: If you have any questions or are interested, please contact us by phone, email or contact form. Subject to prior sale.

Condition: excellent (used), functionality: fully functional, machine/vehicle number: FN455673, Year of construction: 2013, operating hours: 7,827 h, load capacity: 3,000 kg, lifting height: 5,500 mm, free lift: 1,750 mm, load center: 500 mm, fuel type: electric, mast type: triplex, construction height: 2,487 mm, power: 15 kW (20.39 HP), motor manufacturer: Jungheinrich, gearing type: automatic, battery manufacturer: Jungheinrich, battery model: 80V 4 PzS 620 Bj. KW18/2022, battery capacity: 620 Ah, battery voltage: 80 V, battery weight: 1,603 kg, DGUV certified until: 07/2027, fork length: 2,300 mm, tire condition: 95 %, front tire type: cushion tires (black), rear tire type: cushion tires (black), overall weight: 6,185 kg, empty load weight: 4,582 kg, total height: 2,487 mm, color: yellow, Equipment: CE marking, UVV, cabin, lighting, pallet forks, sideshift, Price: €15,000 net €17,850 gross SKU: 720 Basic Information: - Manufacturer: Jungheinrich - Model: EFG 430ks - Year of Manufacture: 2013 - Operating Hours: 7827 h Technical Data: - Drive: Electric - Transmission: Electric - Pedals: Single-pedal control - Control System: Solopilot - Battery: 80V 4 PzS 620 Ah (Year of manufacture: Week 18/2022) - Charger: Included Mast / Dimensions: - Overall Height: 2487 mm - Lifting Height: 5500 mm - Free Lift: 1750 mm - Mast Type: Triplex Mast - Fork Length: 2300 mm - Rated Load Capacity: 3000 kg - Load Center: 500 mm Tires: - Type: Superelastic Tires (SE) NEW Hydraulic Equipment: - Side Shifter: Integrated - Fork Positioner: Yes - Turret: No - Additional Hydraulics: No. 3 and 4 available and in use Equipment: - Cab: Full Cab - Lighting: 2x Front, 2x Rear - Safety Equipment: Seat belt, Floor spot lights front and rear - Heater: Yes (not functional) + Seat heating Extras: - UVV inspection can be performed upon request - Immediately ready for use - Inspection and test drive possible on site by appointment. Transport: Lodpfx Afezlku Heterp Cost-effective shipping available upon request. Invoice with VAT: You will always receive an invoice with VAT shown. Battery: For battery-powered equipment, we would be happy to provide you with a quote including a new battery. Contact: If you have any questions or are interested, please contact us by phone, email, or contact form. Subject to prior sale.

Condition: excellent (used), functionality: fully functional, Year of construction: 2019, operating hours: 1,017 h, load capacity: 4,500 kg, lifting height: 5,500 mm, free lift: 2,400 mm, load center: 600 mm, fuel type: diesel, mast type: duplex, construction height: 3,550 mm, motor manufacturer: DEUTZ, gearing type: hydrostat, fork carriage width: 3,100 mm, fork length: 1,300 mm, fork width: 150 mm, fork thickness: 50 mm, tire condition: 100 %, front tire type: cushion tires (black), front tire size: 200/50-10, rear tire type: cushion tires (black), rear tire size: 28X12,5-15, overall weight: 11,550 kg, empty load weight: 7,050 kg, total height: 2,450 mm, total length: 2,550 mm, total width: 2,550 mm, color: green, Equipment: CE marking, all wheel drive, cabin, lighting, pallet forks, sideshift, COMBILIFT C4500 – 2019 – 1017 HRS – DIESEL – DUPLEX 5500 mm – WIDE FORK POSITIONER – CONDITION 5/5 💪 Used and new forklifts with quality guarantee – FT LOGISTICS ✅ Ready for operation. No compromises. This COMBILIFT C4500 is more than just a machine – it stands for reliability and seamless logistics processes. Fully serviced and visually refurbished, it looks like new and is ready for immediate use. Key Specifications: • Year: 2019 | Hours: 1017 | Drive: Diesel • Capacity: 3900 kg | Mast: Duplex 5500 mm • Fork positioner: 3100 mm | Forks: 1300 mm • Tyres: Superelastic (100%) • Condition: 5/5 – fully serviced and tested Lsdpfx Afszntvxotorp • Dimensions: H 2450 mm | L 2550 mm | W 2550 mm • Free lift: 2400 mm | Tyres: Front 200/50-10, Rear 28x12.5-15 Ideal for: 🏗️ Narrow aisles | 🌲 Wood & steel industries | 📦 Long loads | 🏭 Indoor/outdoor use Why FT LOGISTICS? ✅ Complete service: inspection, oils, filters, tests ✅ In-house painting & service workshop ✅ UDT inspection before delivery ✅ Europe-wide transport 🚛 ✅ Operator training + function test ✅ Warranty & after-sales support ✅ Fast financing options 💼 ✅ Invoices in EUR or PLN ✅ 100+ forklifts available throughout Europe 🌍 FT LOGISTICS – Quality you can rely on. Service you can trust. 🔧