Astec Screens

Asteca 2200x5500

Condition: excellent (used), Year of construction: 2006, operating hours: 2,632 h, functionality: fully functional, machine/vehicle number: 29.381, pressing force: 35 t, filling opening width: 620 mm, filling opening length: 1,000 mm, total width: 2,380 mm, total height: 2,500 mm, total length: 6,625 mm, Including feed belt. The machine is immediately ready for operation. Ihsdpovaw T Ajfx Ahvsw

Condition: as good as new (ex-display), Year of construction: 2025, operating hours: 25 h, functionality: fully functional, Equipment: rotational speed infinitely variable, Crusher Equipment Including: Special tools, reinforced, 7/7 tool carriers with 4 tools each (tools consist of main, pre-crushing, and post-crushing blades) Shaft speed individually and infinitely adjustable, approx. 0–41 rpm Including post-crushing bar Including tilting skip Drive Unit Drive power: 294 kW Including Scania diesel engine, Stage 5 Including standard noise reduction package Including Power RAM pre-cleaner Including central lubrication for the 4 main bearings Including Cleanfix Including swiveling cooler Electrics / Controls Including IFM display Including radio remote control Including four shredding programs (wood, waste, special, and green waste) Discharge Conveyor Including discharge conveyor Custom Equipment Including preliminary armoring of tools Including overband magnet, hydraulically height adjustable – neodymium – Iedsu Hgllepfx Ahvehw Including hopper extension on 3 sides, approx. 800 mm each Including electric pump for hydraulic oil Including GPS module Including rubber tracks Including pressure sensors Including additional noise-reducing cassette (-10 dB(A)) Refurbishment / Service Refurbishment and service by HAAS

Condition: ready for operation (used), Pressing force: approx. 700 kN (approx. 70 tons) Motor power: approx. 11 kW Power supply: 3 × 400 V / 50 Hz Single bale weight: up to approx. 600 kg Bale dimensions: approx. 1100 × 1100 × 1200 mm Machine dimensions: approx. 5.9 m length, 2.5 m width, approx. 2.6 m height Machine weight: approx. 7 tons Cycle time: approx. 45–47 s Design features large feed opening for cardboard option for automatic feeding (e.g., by conveyor) Isdpfx Ahera Dddovjhw manual wire tying (4 wires) pallet lock and hydraulic doors for bale removal Advantages of this press large bales – fewer transports high pressing force suitable for continuous operation Baler from 2016, without tipper

Condition: excellent (used), functionality: fully functional, machine/vehicle number: 92 880 13, opening: approx. 1.030 x 720 mm rotor-Ø x –width: 1.000 x 1.000 mm Ihodpelhrufsfx Ahvsw weight: approx. 13 t.

Condition: good (used), functionality: fully functional, Screen area: approx. 1,300 x 4,000 mm Iodpfx Astpgvxshvjhw new semi-mobile steel construction

Condition: reconditioned (used), Year of construction: 2001, functionality: fully functional, machine/vehicle number: HBC 140 2x75kW 2001 (210-008-01), pressing force: 155 t, bale weight: 1,500 kg, pressure: 250 bar, power: 150 kW (203.94 HP), year of last overhaul: 2024, Equipment: documentation/manual, Sold by Bollegraaf Recycling Solutions, the original manufacturer of this Bollegraaf baler and conveyor: Bollegraaf HBC140s Baler (2x75kW). Baler: Weight: 47.100 kg Construction year: 2008 Hardox bottom floor plate only Variable channel pressure control Plastic valve Hydraulic pump driven by frequency inverter Anti-rat cabling Oil in-depth filtration Modem Hours 40.000 This baler can also be sold fully refurbished according to the 'Bollegraaf OEM Certified Refurbishment standards'. This includes 2 year guarrantee. Contact us for more information or a quotation. General principles of refurbishment Cleaning & disassembly Before the actual refurbishment takes place the baler is completely cleaned and disassembled in our refurbishment workshop. Tolerances After the disassembly the tolerances of all steel components are measured and re-welded where necessary, this at least applies to the following components; • Ram, • Frame, • Channel, • Pre-press-flap After disassembly and inspection the ram is welded-up again and fitted with new ram wheels. The protective grids and the pre-press flap are made dent-free and repaired where necessary. Repainted After measuring the tolerances and any repair- and welding work, all components are being blasted and coated again. Hydraulics: The hydraulic tank is cleaned. The hydraulic lines & hoses are replaced. The hydraulic components are repackaged. The hydraulic oil is replaced. Cabling: All cabling is checked and replaced if necessary. All junction boxes are replaced and placed back in easily accessible positions. Wear parts: All wearing parts are replaced. The pins and shafts of the cylinders and the channel are replaced with new ones. All wearing parts of (both) needle installations and knotters are replaced for new. Cylinders: The cylinders are repackaged and, if necessary, provided with a new chrome layer or a new cylinder rod. Iedpfotvau Ajx Ahvohw MCC Cabinet The switch box is checked and cleaned. If necessary, electronic components are replaced with new ones. The PLC and HMI (human interface) are replaced with the latest Schneider M340 version including the latest software.

Condition: new, Year of construction: 2023, machine/vehicle number: 7YXXX, VIS G is the ideal and the most efficent solution for serap processing like stampings, trimmings, wires mostly recommended for the automotive industry, metal recyclers and non-ferrous metal remelting industry. Ijdpfx Ahomqi Akjvjhw

Condition: reconditioned (used), Year of construction: 2003, Complete plant Primary impact mill, 2320x1700 mm. Mobile Production capacity 800 t/h 0-40 mm Limestone Secondary two Laron Lau 8 hammer mills, 1620x700 mm opening. Isdjlwya Njpfx Ahvohw

Condition: ready for operation (used), Percussion Mill MFL Brand: MFL Type: RCL 140-160 Feed Opening : 1700 x 1000 mm Driving: E-Motor 250-300 kW. Ihsdpfx Ahokwzp Tsvew

Condition: new, functionality: fully functional, power: 450 kW (611.83 HP), gearing type: automatic, fuel type: hybrid, color: other, Year of construction: 2026, Equipment: cabin, hydraulics, CONSTMACH JC-3 mobile jaw crushing and screening plant is a powerful and efficient solution designed for crushing and screening extremely hard rocks such as granite, basalt, and gabbro, which have high abrasiveness and high silica (SiO₂) content. The JC-3 is manufactured using durable materials, first-class engineering, and high-quality workmanship to ensure long-lasting performance. Its compact, dual-chassis design allows for easy transport and quick setup in field conditions. The plant's first chassis is equipped with a vibrating feed hopper, CJC-110 jaw crusher, bypass belt, feed belt, hydraulically supported mobile chassis, and dust suppression system. The second chassis houses a METSO HP 300 or equivalent cone crusher, a 3 or 4-deck vibrating screen, a return belt, foldable stockpile belts, and an advanced automation system. The PLC-based control system, featuring SIEMENS – SCHNEIDER branded electronic components, enables fully automatic operation. Optional diesel generator integration is also possible. The JC-3 has a production capacity of 250–300 tons/hour and can process material with a maximum feed size of 1,100 x 850 mm. Three or four different product fractions can be obtained simultaneously. If more fine material or cubic products are required, the plant can be converted to a JCV-3 configuration with a V-80 mobile sand making plant containing a VSI crusher. JC-3 Mobile Crushing and Screening Plant Technical Specifications Production Capacity: 250–300 tph Maximum Feed Size: 1,100 x 850 mm Main Configuration: Jaw Crusher + Cone Crusher + Vibrating Screen Total Motor Power: 450 kW Electric Generator Requirement: 800 kVA Plant Weight: 100 tons (total of two chassis) Plant Dimensions: 1st chassis 13×3.4×4.5 m / 2nd chassis 20×4.4×4.5 m Chassis Type: Wheeled double chassis equipped with hydraulic opening legs Why Choose the JC-3 Mobile Jaw Crushing and Screening Plant? CONSTMACH JC-3 provides maximum efficiency at your construction site with its high production capacity, short setup time, and superior crushing performance. The user-friendly automation system offers full control with minimal operator intervention, while the durable chassis structure allows for years of uninterrupted operation. With CONSTMACH's engineering power, spare parts support, and after-sales service, the JC-3 more than pays for your investment. If you are looking for power, reliability, and mobility in a single unit, the JC-3 is the right choice for you. Ijdpfexqg Rusx Ahvehw What Do We Do at Constmach? Constmach is a leading machine manufacturer offering a wide range of products tailored to the needs of the construction and mining industries. Our product portfolio includes concrete block making machines, stationary and mobile concrete plants, rock crushing machines, rock crushing and screening plants, sand washing machines, sand making machines, asphalt plants, conveyor belt systems, jaw crushers, and mobile crushing plants. With its high quality standards, innovative production approach, and customer-focused solutions, Constmach stands out as a reliable brand in both national and international markets. Our products continue to be the preferred choice of industry professionals due to their durability, efficiency, and long-lasting performance.