Used Staircase Formwork for sale (89)

Condition: used, approx. 300 pcs. Gedpsy Rvrqefx An Rsbl

Condition: excellent (used), Aluminium platform ladder with three-sided platform guardrail, featuring knee and toe board. Gbodpfjyctvcex An Rjl Platform depth: 800 mm Platform width: 600 mm Tread depth: 80 mm Frame material: aluminium Mobile, wheel diameter: 100 mm Wheel equipment: 2 fixed castors Platform height: 1660 mm Including platform: 7 steps Overall construction height: 166 cm platform + 110 cm guardrail Weight: 40 kg Width: 1510 mm Depth: 1510 mm Accessories: 2 handrails Shipping: disassembled, possible. Assembly instructions included.

Condition: excellent (used), Aluminium platform ladder with three-sided platform guardrail, featuring knee and toe board. Platform depth: 800 mm Platform width: 600 mm Tread depth: 80 mm Gbodpoyylugefx An Rjl Frame material: aluminium Mobile, wheel diameter: 100 mm Wheel equipment: 2 fixed castors Platform height: 1660 mm Including platform: 7 steps Overall construction height: 166 cm platform + 110 cm guardrail Weight: 40 kg Width: 1510 mm Depth: 1510 mm Accessories: 2 handrails Shipping: disassembled, possible. Assembly instructions included.

Condition: new, Year of construction: 2025, functionality: fully functional, Stair milling machine for mortising treads and risers into stringers and posts. The machine is equipped with a high-frequency milling motor. The machine is brand new. 400 V, 50 Hz. Gbjdpeyxzacefx An Rol

Condition: new, Year of construction: 2018, Thyssenkrupp Velino xtra Escalator Escalator Description Manufacturer: Thyssenkrupp Model: Velino xtra FT 923 Type: 5 EK 30 Year of Construction: 2018 General: Travel height: 4.129 m Step width: 1.000 m Step length: 0.203 m Handrail length: 2 x 24.967 m Nominal speed: 0.5 m/s Incline angle: 30°C Number of steps that can be used simultaneously: 24 Total number of steps: 58 Safety features: Start-up switch, up/down, top, bottom Emergency stop switch, top + bottom Handrail retraction switch, right + left, top + bottom Chain tension monitoring switch, right + left Speed monitoring Phase control device Control cut-out switch, top + Below Thermal motor protection switch Brake function monitoring Handrail speed monitoring Fault step monitoring Cover plate switch Drive: Single drive with duplex chain reduction Motor make: emod Motor type: 5CNR112L/4-20 Motor power: 7.5 kW Rated speed: 1500 rpm Connection voltage: 230/400 V Gearbox type: auma FTS 125 worm gear Covering: Interior: Glass balustrade Exterior: Galvanized sheet steel The escalator was manufactured in 2018 and has never been used. Item location: Bottrop Availability: 4 units Disassembly and removal by buyer. Disassembly by us is also possible for an additional charge. Financing through our bank is also possible. komplett-konzept.leasingo.de Gbsdpfx Answ Hcvue Rjl You can find more items - new and used - in our shop! International shipping costs on request!

Condition: good (used), The scope of delivery includes: 01x steel staircase Material color: yellow Floor height: approx. 2,000 mm Projection: approx. 2,550 mm Total width: approx. 1,225 mm Chest profile: 180 x 8 mm Railing: both sides, galvanized Handrail and knee rail round tube Steps: tear plate, galvanized Step dimensions: 1,210 x 270 mm Number of steps: 10 steps Step height: approx. 175 mm Total length of the staircase: approx. 3,700 mm End stop: L-profile: 65 x 110 mm The end stop of the steel staircase is attached with 2 screws per side Drill hole diameter: approx. 16 mm Note: Gedpfx Ajvnr Rren Rsbl The steel staircases were partially assembled and partially unassembled. The pictures are intended to illustrate the material. The steel stairs are commissioned unassembled. This is a used item, it may have scratches, dents and signs of use. Your contact person in our company: Mr: Andre Evering Mr: Mario Klöver Mr: Falk Deutsch General information about the item: This item is only available for collection. Any additional transport or shipping of this item is associated with additional costs, which can be requested separately from us depending on the delivery location or scope of delivery.

Condition: good (used), Scope of delivery includes: 01x Steel staircase Material color: yellow Floor height: approx. 1,890 mm Projection: approx. 2,650 mm Total width: approx. 1,208 mm Stringer profile: 200 x 5 mm Railings: on both sides Handrail and knee rail: rectangular tubing Steps: smooth Step dimensions: 1,108 x 250 mm Number of steps: 11 steps Riser height: approx. 180 mm Overall stair length: approx. 3,320 mm End stop: L-profile: 100 x 55 mm Note: The steel staircases are partially assembled and partially unassembled. The images are for material illustration purposes only. The steel staircases are picked and shipped unassembled. This is a used item; scratches, dents, and signs of use may be present. Your contacts at our company: Gedpsvntb Sofx An Rebl Mr. Andre Evering Mr. Mario Klöver Mr. Falk Deutsch General information about the item: This item is offered for collection only. If transport or shipping is required, this is subject to additional costs which can be requested from us depending on the delivery location and scope of delivery.

Condition: good (used), The scope of delivery includes: 01x steel staircase Material color: yellow Floor height: approx. 1,9450 mm Projection: approx. 2,645 mm Total width: approx. 1,220 mm Chest profile: 180 x 8 mm Railing: both sides, galvanized Handrail and knee rail round tube Steps: tear plate, galvanized Step dimensions: 1,204 x 270 mm Number of steps: 10 steps Step height: approx. 190 mm Total length of the stairs: approx. 3,320 mm End stop: L-profile: 85 x 85 mm The end stop of the steel stairs is attached with 2 screws per side Drill hole diameter: approx. 16 mm Note: The steel stairs were partially assembled and partially unassembled. The pictures are intended to illustrate the material. The steel stairs are commissioned unassembled. This is a used item, it may have scratches, dents and signs of use. Your contact person in our company: Mr: Andre Evering Mr: Mario Klöver Mr: Falk Deutsch General information about the item: Gedpfevntmnjx An Rsbl This item is only available for collection. Any additional transport or shipping of this item is associated with additional costs, which can be requested separately from us depending on the delivery location or scope of delivery.

Condition: good (used), Steel staircase, exterior staircase, extension staircase -Steel staircase: Add-on staircase with treads and railings on both sides -Width: 880 mm Gedpfx Ansrg Ivbs Rjbl -Step spacing: approx. 200 mm -Dimension of top step: 1940 mm -Transport dimensions: 3880/880/H970 mm -Weight: 150 kg

Condition: good (used), Steel staircase, external staircase, machine staircase, machine access, extension staircase, machine platform -Manufacturer: Günzburger, Machine stairs, Machine access -Step size: approx. 600 x 260 mm -Height: upper step 685 mm -Permissible load: 200 kg -Number: 1x staircase available -Dimensions: 650/980/H210 mm Gjdpfx Aneikwgns Rebl -Weight: 14 kg

Condition: used, Formwork nail, formwork nails, concrete nails, head bolts -Manufacturer: Würth, shuttering nail in magazines box with 100 pcs. -Type: SMA 106/10 54mm long -Number: 61x box available -Price: per box Gbsdpfeiqu R Sex An Rjl -Dimensions cardboard: 120/100/H55 mm -Weight: 0.5 kg/box

Condition: new, Year of construction: 2025, IDEAL FOR STAIRCASE CONSTRUCTION other variants on request - 5 tiers - clamping depth 1050 mm - 1 pressure beam -1500 mm long, 60 mm high, per tier - 3 infinitely adjustable pendulum counter bearings, 400 mm long, per tier - 2 hold-downs with handwheel, per tier - 5 support arms, per shelf Gjdpsgu D Rmsfx An Rjbl - all support arms with plastic supports (glue-repellent) - maximum pressing length 1600 mm - powder coated (glue repellent): grey white RAL 9002, moving parts light blue RAL 5012 - the presses are delivered ready for operation with pressure regulating valve + air standard connection.

Condition: new, Year of construction: 2026, Universal solid wood boring machine with stepless turnable drilling unit for universal applications like e.g. staircases, entry doors, windows, winter gardens as well as useable as horizontal mortiser. Gjdpfx Ajdx R E Tjn Robl Short introduction: • Universal application: staircases, frames, entry doors, windows, winter gardens as well as useable as horizontal mortiser, ... • Steppless turnable drilling unit: 65° - 0 - 65° • Drilling depth up to 200 mm (larger drilling depths optional) • Position height adjustment for 2 levels, pneumatically, 0 - 100 mm • Drilling in two levels through pneumatic raising and lowering of the drilling motor at a single workpiece clamping position • Pneumatic clamping cylinders • Multi spindle drillheads (option) • Pneumatic feed (option) • Mobil through castors (option) or with pallet trucks

Year of construction: 2001, condition: used, Crate washer for PETCYCLE plastic crates Additional title: Crate cleaning system Capacity: 2950 crates/h Power: 18 kW Current: 38 A Voltage: 230/400 V Frequency: 50 Hz Length: 7300 mm Width: 1570 mm Height: 1710 mm Gsdpfx Anox T Avnj Robl Weight: 1900 kg Formats: plastic crate: 20 x 0,5 l, 9 x 1,0 l, 6 x 1,0 l, 6 x 1,5 l Running direction: transverse Material: stainless steel Position: free standing Base construction: Self-supporting machine housing in block construction on spherical feet Features: Caustic, hot water and fresh water spraying, inspection window, platform with staircase and railing, crate turner,

Condition: used, Year of construction: 2001, Bottle ejector for removing empty PET bottles from PETCYCLE crates, with attached upward turner. Additional title: PET bottle ejection system Capacity: 4000 crates/h Power: 2,8 kW Current: 8 A Voltage: 400 V Frequency: 50 Hz Compressed air: 6 bar, 1 m³/h Length: 3000 mm Width: 1910 mm Height: 3830 mm Weight: 2500 kg Formats: PETCYCLE 20 x 0,5 l, 9 x 1,0 l, 6 x 1,0 l, 6 x 1,5 l Operation / Control: Simatic S7-300 Material: stainless steel Position: free standing Base construction: Stainless steel square tube construction on spherical feet Gjdpfxsx T Ayye An Robl Features: Infeed or upward turner with protective grid, crate transport, crate guide, bottle ejector, switch cabinet, protective housing with plexiglass panes, staircase and operating platform with railing

Condition: used, Year of construction: 2005, Make: ARISA, Model: LD8-4-2000-470-230-LDE, Year of manufacture: 2005, Serial No.: 820016341, Press control system: Siemens, Type: Sinumerik 840D, Pressing force: 1,800 t, Table clamping surface: 4,500 x 2,300 mm, Ram clamping surface: 4,500 x 2,300 mm, Ram stroke: 750 mm, Ram adjustment: 400 mm, Die height min.: 900 mm, Die height max.: 1,300 mm, Strokes per minute: 8 - 24 spm, Cushion force (table): 2x 300 - 200 t, Cushion stroke (table): 250 mm, Cushion force (ram): 2x 5 - 55 t, Cushion stroke (ram): 150 mm, Coil feeding line, Max. coil weight: 25 t, Coil width: 300 - 1,800 mm, Sheet thickness: 0.5 - 3.0 mm, Consisting of decoiler and loading cart, Straightening machine, Oiling station, Transfer system, Switch and control cabinets, Platform system with staircase, Conveyor belt L 10,000 mm, Workbench system with undercabinets and vise, Quality control workstation. +++ Note: Machine is part of an online auction! +++ Gbedpfx Asx Ry Dqsn Rsl

Condition: new, functionality: fully functional, Year of construction: 2022, A mobile, diesel-powered construction concrete pump used to transport and convey liquid concrete or similar materials (such as micro-concrete, structural mortar or shotcrete) on a construction site — especially where it is difficult to place the concrete manually or where the concrete must be transported over long distances to the formwork or structural site. Gedpfx Ajy It Udsn Robl

Condition: used, mileage: 4,835 km, power: 58 kW (78.86 HP), first registration: 10/1991, fuel type: diesel, overall weight: 3,600 kg, next inspection (TÜV): 03/2028, color: red, gearing type: mechanical, number of seats: 2, total length: 6,150 mm, total width: 2,310 mm, total height: 3,360 mm, Year of construction: 1991, * Mercedes-Benz 308D Dahms & Co Airport Fire Service Rescue Staircase * VERY NICE & WELL-MAINTAINED 308 D. * EVERYTHING WORKS PERFECTLY * VERY UNIQUE * RUST-FREE OPENING HOURS Monday - Friday from 09:00 - 17:00 (By appointment only...) CONTACT INFORMATION Phone: WhatsApp: Email: Godpfsywq H Nsx An Rebl Transfer and customs license plates (export numbers) are available from us. Subject to errors and prior sale. Technical details and equipment features must be checked separately. The contractual condition is only what is inspected on site at the time of purchase and confirmed in writing – please schedule an appointment...

Condition: used, maximum load weight: 28,040 kg, overall weight: 36,000 kg, axle configuration: 3 axles, first registration: 12/2021, next inspection (TÜV): 08/2026, loading space volume: 92 m³, total width: 2,550 mm, total height: 4,000 mm, Equipment: ABS, Knapen Moving Floor K100 92m³ 10mm Floor General Manufacturer: Knapen Trailers * Model / Type: K100 A5060 * Year of manufacture: 2020 * Chassis number: XPN * Country of registration: Germany * Unladen weight: approx. 7,924 kg Gbsdjy Ngbajpfx An Rol * Gross vehicle weight: 36,000 kg * Max. axle load: 24,000 kg * Max. kingpin load: 12,000 kg (permitted in country of registration) * Volume: approx. 91.9 m³ * Tapered moving floor semi-trailer * Axle configuration: rigid/rigid/rigid ----Dimensions Exterior length: 13,670 mm * Exterior width: 2,550 mm * Exterior height: 4,000 mm * Interior height front: 2,690 mm * Interior height rear: 2,785 mm * Fifth wheel height: 1,150 mm * Kingpin to 2nd axle: 7,750 mm * Axle spacing 1st-2nd axle: 1,310 mm * Axle spacing 2nd-3rd axle: 1,310 mm ----Axles & Chassis 3 x SAF 9 t Intradisc+ Integral CD Off-Road Axles * All axles rigid * Disc brakes Ø 430 mm * 10-bolt wheel connection * Air suspension with standard control unit on the left in front of the axles * Axle as lift axle, fully automatic via EBS * Includes traction assistance (3x braking) * Radio remote control for lift axle ----Tyres & Rims* Goodyear KMAX T * Tyre size: 385/65 R22.5 * Steel rims 22.5" x 11.75 * 6 wheels complete * No spare wheel ----Body Closed side walls left and right * Sliding partition wall (min. ground clearance 100 mm) * Rear doors with exterior locking bars * One lock rod per door * Upper belt made of steel, swiveling left and right * Platform at the front wall * Ladder at the front wall left and right * Standard cross beams Ø 60.3 mm (4 pieces) * Cross beam compartment: 3 x approx. 4,100 mm * Tarp 680 g/m² (RAL 9006 white aluminium) * Tarp supports with 3 positions (4 pieces) * Lashing straps (4 pieces) ----Floor / Moving Floor Cargofloor System CF-500 SL-C * Electric control * Corrugated aluminium floor boards 10 mm (21 boards) * Fixed front plate * Stainless steel plate at rear under the floor ----Attachments JOST landing legs with sliding compensation * Plastic toolbox left in front of axles (1000 x 500 x 500 mm) * 30 l water tank with soap dispenser * Closed side underrun protection * Swiveling mud flaps * Anti-spray mat on 3rd axle * Long staircase with extendable rear steps and platform * 2 x wheel chocks left * Broom and shovel holder right ----Lighting 6 x round LED tail lights (3-chamber) * LED fog and reversing lights * LED side marker lights (4 pairs) * LED marker lights at the rear * Reflective contour markings according to EU regulation * LED work lights at the rear (radio controlled) * LED work lights at landing legs (radio controlled) * LED LCG-2 switch control unit ----Hydraulics / Connections ISO-N and ISO-S couplers + 15-pin plug * Radio remote control Knapen Trailers V1 * Hydraulic connections centrally at the front wall (vertical) * Pressure line left, return line right * Additional hydraulic connectors at the landing legs * Brake connections available * Acoustic reversing alarm (manually adjustable) ----Paintwork Body painted in RAL 7011 iron grey * Wheel hubs in RAL 2008 light red-orange * Chassis and underside unpainted For further information, I am at your disposal.

Condition: excellent (used), Year of construction: 2011, 4-AXIS MILLING AND ROUTING CENTER LOADER FOR 9 TOOLS Brand: POUWELS Model: DEF 1000 Type : SPEEDO Serial number: 135 Year : 2011 (Machine deployed and visible in our workshops by appointment) The DEF 1000 router is designed for routing all types of wood parts exclusively. It is specialized for staircase manufacturing. MACHINING CAPACITIES : Movements (machining strokes) : - X travel: 6000 mm (option installed) Y movement: 1000 mm Vertical movement (Z axis): 380 mm - Maximum travel speeds : Gbedpfslc Hzwex An Rol X axis: 75 m/min Y axis: 75 m/min Z axis: 30 m/min - C axis rotation: -90 +90°. MACHINE COMPOSITION - Control panel Windows 7 Pro computer - Ethernet hub - Manual or programmed control mode : Pouwels Prostair program direct link Autocad 2008 Control system: Num 1050 Digital Drive - 3-axis routing heads 7.5 kw - 0 to 24000 rpm - Horizontal routing head with rotation ( C axis ) 7.5 kw - 24000 rpm - Fixed side tool changer for 9 HSK63 F tools ER32 collets OTHER FEATURES : - Power supply : 400v Three-phase+N+T - Installed power: 15 kW In Max 37.5A - Suction cups Ø180mm and Ø120 h.70mm - One vacuum pump 170 m3/h - Pneumatic supply: 8 bars - CE standards - Suction: centralized outlet Ø 250 mm - Recommended flow rate: 8000 m3/h (5500 min.) Overall dimensions 8300 x 3500 x 2050 mm Weight 8560 kg Please consult us for the supply of consumables, accessories and/or vacuum systems. Machine offered as is. Prices ex-store. Delivery and additional services on request.

Condition: used, Year of construction: 2021, Exhibition unit (little used) Unit for cutting soft materials such as honeycomb cores, acoustic elements and fabrics using oscillating movements Processing options: Cutting straight or radial cutouts Typical areas of application: • Textiles: Cutting fabrics or textiles (e.g. leather, felt, etc.) • Cutting honeycomb cores for doors, staircase construction, exhibition stand construction, caravan construction • Acoustic elements: Cutting polyester, foam or other sound-absorbing materials • Aviation, boat building, aerospace: Cutting honeycomb cores Technical specifications Max. input speed: 6,000 min-1 Max. output speed: 9,000 min-1 Gear ratio: 1:1.48 Max. torque: 8 Nm Permissible operating temperature: max. 85°C Position of the torque arm to the tool: 360° Processing angle: 0° Number of tool outputs: 1 / fixed Lubrication: Grease / lifetime grease filling Amplitude: 4 mm Frequency: 150 Hz Storage location: Garbsen Gbedpfovvi Iqox An Rsl

Condition: used, Year of construction: 2021, functionality: fully functional, 3 colour flexo with slotter, rotery die cutter and folder-gluer SERIAL WORK(mm): 1290x2600 HOPPER OPERATION(mm): 1550x2600 MIN. CARTON WIDTH(mm): 350x750 MAX. PRINT AREA(mm): 1290x2350 CHANNEL WIDTH(mm): 9 CLICHE THICKNESS(mm): 3.9 MAX. CARDBOARD THICKNESS(mm): 10 CAPACITY (PCS/HOUR): 6000 MAX. ROTERY CUTTING AREA(mm): 1240x2350 CUTTER TIRE THICKNESS(mm): 10 PRESSURE TURN DIAMETER(mm): 399 CLICHÉ PRINT ROLLER DIAMETER(mm): 407 ROTERY FORMWORK ROLLER(mm): 360 ROTERY RUBBER REDIAMETER(mm): 292 MAIN MOTOR POWER(kw): 15 Gbedpfx Asw Rya Dsn Rsl

Year of construction: 2023, condition: used, functionality: fully functional, heating capacity: 72 kW (97.89 HP), Brewhouse 3-vessel system with extensive extra equipment: Mashing – Lautering – Boiling/Whirlpool Manufacturer: HGMC Year of construction: 2023 Net output capacity: 1200 liters Width: approx. 6.50 m Depth: approx. 2.70 m Height: All vessels up to the condensate separator transition approx. 2.65 m (Mash kettle and lauter tun plus height of condensate separator approx. 1.70 m) (Boiling kettle plus height of kettle vapor condenser approx. 0.35 m) Details: - Mash kettle with agitator and 2-zone steam heating - Lauter tun with cutting mechanism and sparging nozzles, lauter grant with fine control valve, underfloor spray nozzles; 4-piece removable false bottom Godpfxsy Igzqo An Robl - Boiling kettle/whirlpool with tangential inlet and 2-zone steam heating, as well as kettle vapor condenser - All tanks with sight glass, LED lighting and CIP (cleaning-in-place) - Stainless steel platform with handrail and staircase - Mash and wort pumps - Controls for mash agitator and cutting mechanism, mash and wort pumps, as well as automatic valve control for heating (individual heating zones can be manually shut off with handwheels) - 72 kW electric steam generator with automatic water softener and integrated power meter, main circuit breaker and each of the three heating elements individually fused - Plate heat exchanger - All pipe routes manually switchable via DN ball valves - Heating rate approx. 1 min/° - Spent grain removal conveniently at working height, supported by cutting mechanism and spent grain shovel; spent grain outlet with cover plate - Generally top quality workmanship and perfectly coordinated The system works exceptionally well and delivers top results. Lautering, in particular, performs remarkably smoothly and the heating capacity is more than sufficient. With the optionally available, electrically heated 1000-liter hot water tank (18 kW), double brews are easily possible. The price/performance ratio is unbeatable. Viewing by arrangement is possible at any time. The system can be test-run on site by prior agreement. Sale due to business closure.

Condition: new, Year of construction: 2025, THE PRECISION 3-ROLL BENDING MACHINE When developing the compact and mobile horizontal bending machine, the focus was clearly set on the production of dimensionally accurate coils such as handrails for spiral staircases. This is the supreme discipline, since two mutually influencing variables (radius and pitch) must be combined in a bend to form a dimensionally accurate geometry. The interaction of tube calculation on the PC, implementation on the bending machine, and control via the measuring equipment with final correction of the bending values ensure accurate bending. By simple and few inputs into the PC tube calculation program, the local printer provides a printout and supports the calculation of all necessary bending and correction data to operate the machine. A new powerful drive concept allows infinitely variable adjustment of the bending speed, requiring only a 230 V (AC) connection. Hardened steel tools as well as hard plastic tools that are gentle on the surface are available for selection. To ensure optimum feed even with tight bending radii, all three bending shafts are driven. The drive concept also proves its worth in tough daily use on the flat, when bending tubes and profiles. Customers of the 4800, 5000 and 6000 bending system have the option of purchasing the roller bending unit without the drive. The roller bending unit with the designation RB43, can be adapted to the bending systems 4800, 5000 and 6000 via the bending shaft. In this case, the machines act as a drive unit. POSSIBLE APPLICATIONS: - Handrails/bottom rails for spiral staircases - Large tubular profile bends - General metal construction TECHNICAL DATA: - Bending capacity Ø 10 to 60 mm - bending radius min: 300 mm at Ø 42,4 mm - Bending direction right and left - Digital bending adjustment for radius and pitch - Safety foot switch with emergency stop function - Maintenance-free robust three-phase motor - Construction site suitable 230 V connection - Weight 280 kg OPTIONAL ACCESSORIES: - Support roller - for stabilization - Lifting roller - to produce controlled slope - MGR - measuring device to determine the correct radius - MGV - measuring device to determine the correct slope based on torsion - MPW - PC calculation program to determine the correct bending values Gbodpfeng A R Sex An Rsl - RB4303 - universal bending tool for profiles up to 60 mm height - Tools for special profiles OUR SERVICE FOR YOU ON SITE: - Welcome to the test production in our house in the demo room - Consultation-information meeting at your site - Consultation and handling as leasing/financing purchase via - Service contracts, maintenance at your site

Condition: used, Year of construction: 2017, functionality: unexamined, Used HEGLA Glass Packlifter & Sheet lifter with frame – Sold as Seen Offered for sale is a used HEGLA glass transport and handling system, comprising steel support frames, vertical transport racks, safety guarding, and an integrated access platform with stairway. Manufactured by HEGLA Maschinenbau GmbH & Co. KG (Germany), this robust industrial system is designed for the safe unloading of packs, and handling of large glass sheets within a production environment. Key details  Manufacturer: HEGLA Maschinenbau GmbH & Co. KG Type: Transporteinrichtung (Transport System) Year of manufacture: 2017 Load capacity: 3,000 kg Max load height: 2,550 mm Approx. machine weight: 940 kg CE marked Construction & features: Heavy-duty steel frame construction Multiple vertical glass support racks with rubber contact pads Integrated safety fencing and guarding Access platform with industrial steel staircase and handrails Overhead beam structure suitable for handling integration Floor-mounted and free-standing sections Condition: Used, with visible cosmetic wear including paint chips and surface marks consistent with normal industrial use Structurally complete and previously operational at time of decommissioning No testing carried out since removal Sale terms: Gedpfxex Tpg Ho An Rsbl Sold as seen No warranty given or implied Buyer responsible for inspection, loading, and transport Power, controls, and ancillary equipment only included where visible in photos