Used Cellar Formwork for sale (65)

Condition: used, Year of construction: 2019, Overview  This isobaric maturation tank was manufactured in 2019 by Spadoni. It is designed for the isobaric and isothermal maturation of beverages under pressure, with a working capacity of 1,200L (12 hL) and a total volume of 1,300L (13 hL). The tank is certified up to 3 bar (PED) and equipped with high-quality fittings and insulation. Further information on request. Technical data  Capacity: Working: 1,200 L / 12 hL Total volume: 1,300 L / 13 hL Pressure: Working pressure: 2 bar Shell: 0.49 bar Factory hydraulic test: 2 bar Certified (PED): 3 bar Material: AISI 304 stainless steel Insulation: 80 mm polyurethane foam on cylinder and bottom head, stainless steel covered Finish: Interior: 2B with polished welds Exterior: brushed grain 120 with polished welds Heads: Klopper type (top and bottom) Cooling: Cooling jacket on the cylinder Manway: Isobaric Ø400 mm, pressure-resistant up to 4 bar Connections & fittings: 2 lifting lugs Ladder support CIP tube with top spray ball and 2x butterfly valves NW40 Drain valve NW40 with cap and chain Bottom discharge valve NW40 with cap and chain Sight glass level tube (rigid acrylic, graduated in liters) Probe port (PT-100 sensor) Sampling valve Safety valve (calibrated at 3 bar) Mounting: Adjustable feet   Gujdpfx Ajwkfwpjnkjb

Condition: used, Year of construction: 2020, Overview These fermentation tanks were manufactured in 2020 by the German company Speidel. They are CE-certified, equipped with a cooling jacket, and rated for up to 2.5 bar pressure. The tanks are in good condition and available immediately. Technical data  Capacity: 2 × 1,250 liters Pressure rating: 2.5 bar Cooling jacket: Yes Certification: CE Scope of Delivery  2x 1,250-liter fermentation tanks   Gujdpfewfq Dkox Ankjb

Condition: used, approx. 300 pcs. Gedpfx Ansy Rvrqokjub

Year of construction: 1985, condition: used, Pressurised tank cellar with 4 upright 324 hl stainless steel pressure tanks and with double-seat valve solution on the operating level. The tanks are cooled using ice water. Additional title: 4 pressure tanks Diameter/tank: 2550 mm Guedpfxsvcqyne Anksb Total height/tank: 7360 mm Cooling surface/tank: 25 m² Perm. working overpressure: 3 bar Systemic volume: 324 hl Length: 12 m Width: 4 m Height: 7,5 m Weight: 2585 kg Material: stainless steel AISI 304 Features: Tank cleaning equipment with spray head, safety valve, pressure gauge, air valve combination; sampler, level indicator with valves, outlet valve Periphery: Inlet and outlet pipework via double-seat valves

Condition: used, Year of construction: 1993, 5 fermentation and storage tanks (104 hl) with flat conical bottom, frame and cone cooling zone, manhole, sampling tap and central outlet. 1 white beer fermentation tank (81 hl) with flat conical bottom, frame and cone cooling zone, manhole, sampling tap, yeast chute and central outlet. 1 batching/flotation tank (122 hl) with flat conical base, frame and cone cooling zone, manhole, sampling tap and central outlet. The tanks are also available individually or in partial quantities. Gujdpfx Aevcq D Tjnkeb Additional title: 7 pcs. of vertical, coolable stainless steel tanks Volume fermentation- and storage tanks: 10474 l per piece Volume wheat beer tank: 8071 l Volume flotation tank: 12242 l Material: stainless steel 1.4301 Position: standing on feet Features: Flat conical bottom, frame and cone cooling zone, manhole, sampling tap, central spout, yeast chute

Condition: used, Pressure tank hose cellar with 7 pressure tanks. - 2 x 104 hl, 3 bar (Gross, 1983/1984) - 2 x 104 hl, 3 bar (Edel, 1978) - 1 x 92 hl, 3 bar (Ziemann, 1963) - 1 x 40 hl - 1 x 50 hl - Various pumps and hoses Additional title: 7 pressure tanks Material: stainless steel Gedpsw Uvblefx Anksub Features: Pressure tank cellar with uninsulated, uncooled pressure tanks. 2 x 104 hl, 3 bar (Gross, 1983/1984), 2 x 104 hl, 3 bar (Edel, 1978), 1 x 92 hl, 3 bar (Ziemann, 1963), 1 x 40 hl, 1 x 50 hl

Condition: used, Year of construction: 1985, Pressurised tank cellar with three upright stainless steel pressure tanks of 207 hl each and with double-seat valve solution on the operating level. All tanks can be cooled. Additional title: 3 pressure tanks Volume per tank: 20700 l Effective cooling surface: 18 m² Max. working overpressure inner tank: 4 bar Length: 2,10 m Width: 2,10 m Height: 6,66 m Weight: 1985 kg Gsdpfjw Tmqnex Anksub Material: stainless steel AISI 304 Features: Tank cleaning equipment with spray head, safety valve, pressure gauge, air valve combination; sampler, level indicator with valves, outlet valve, Printed tank books and drawings available Periphery: Inlet & outlet pipework via double-seat valves

Condition: used, Year of construction: 1994, Overview These 2 isobaric pressure tanks (150 hl each) manufactured by TMCI Padovan in 1994 originate from the wine industry and were previously used for sparkling wine production. Designed with a full cooling jacket and pressure resistance up to 6 bar, the tanks are suitable for fermentation, maturation, and storage of carbonated products, including beer, sparkling wine, and similar beverages. The tanks are constructed from carbon steel with an internal food-grade epoxy coating, representing a widely used technology before stainless steel tanks became the industry standard. They offer a cost-efficient alternative to stainless steel vessels, especially for operations with lower investment requirements. Each tank is fully insulated and equipped with a complete cooling jacket, allowing temperature-controlled processing. As with all epoxy-coated vessels, periodic renewal of the internal coating is required depending on usage and product conditions. TECHNICAL DATA Manufacturer: TMCI Padovan Year of Manufacture: 1994 Quantity: 2 units Type: Isobaric pressure tank with full cooling jacket Application: Fermentation, maturation, storage of carbonated beverages Capacity: 150 hl per tank Material: Base: Carbon steel Internal coating: Food-grade epoxy resin Insulation: Approx. 100 mm polyurethane with stainless steel cladding Pressure Rating: 6 bar Dimensions (per tank): Outer Diameter: approx. 2,400 mm Cylinder Height: approx. 4,000 mm Gjdpfx Ansy Hknxjkjub

Condition: used, Year of construction: 1992, Overview These 4 isobaric pressure tanks (200 hl each) manufactured by TMCI Padovan in 1992 originate from the wine industry and were previously used for sparkling wine production. With their full cooling jacket design and pressure rating of up to 6 bar, the tanks are suitable for fermentation, maturation, and storage of carbonated beverages, including beer, sparkling wine, and related products. The tanks are constructed from carbon steel with an internal food-grade epoxy coating, a technology widely used before stainless steel became the industry standard. They represent a cost-effective alternative to stainless steel tanks, particularly for producers seeking lower capital investment. Each tank is fully insulated and equipped with a complete cooling jacket, enabling controlled temperature processes. Due to the coating system, regular inspection and renewal of the epoxy lining is required, depending on usage and product type. Technical Data Manufacturer: TMCI Padovan Year of Manufacture: 1992 Quantity: 4 units Type: Isobaric pressure tank with full cooling jacket Application: Fermentation, maturation, storage of carbonated beverages Capacity: 200 hl per tank Material: Base: Carbon steel Internal coating: Food-grade epoxy resin Insulation: Approx. 100 mm polyurethane with stainless steel cladding Pressure Rating: 6 bar Dimensions (per tank): Outer Diameter: approx. 2,200 mm Cylinder Height: approx. 7,000 mm Total Height: approx. 9,000 mm Gujdpfoy Hkl Djx Ankob

Condition: used, Year of construction: 1985, Overview These 5 insulated pressure tanks (100 hl each) manufactured by TMCI Padovan in 1985 originate from the wine industry and were previously used for sparkling wine production. Due to their pressure rating and full cooling jacket design, they are suitable for fermentation, maturation, and storage of carbonated products. The tanks are constructed from carbon steel with an internal food-grade epoxy coating, a technology widely used in the industry before stainless steel became standard. While not as common today as stainless steel vessels, these tanks offer a cost-effective alternative, particularly for producers with lower investment budgets. Each tank is fully insulated and equipped with a complete cooling jacket, enabling controlled temperature processes. It should be noted that the epoxy coating requires periodic renewal, depending on usage and product type. Technical Data Manufacturer: TMCI Padovan Year of Manufacture: 1985 Quantity: 5 units Type: Pressure tank with full cooling jacket Application: Fermentation, maturation, storage of carbonated beverages Capacity: 100 hl per tank Material:Base: Carbon steel Internal coating: Food-grade epoxy resin Insulation: Approx. 100 mm polyurethane with stainless steel cladding Pressure Rating: 6 bar Dimensions (per tank):Outer Diameter: approx. 2,200 mm Cylinder Height: approx. 4,000 mm Gusdpfoy Hkkyox Ankeb

Condition: used, Year of construction: 2005, Overview These 8 isobaric pressure tanks (500 hl each) manufactured by Sirio Aliberti in 2005 originate from the wine industry and were previously used for sparkling wine production. With a working pressure of up to 6 bar and full insulation, the tanks are well suited for fermentation, maturation, and storage of carbonated beverages, including beer, sparkling wine, and similar products. The tanks are constructed from carbon steel with an internal food-grade epoxy coating, combined with polyurethane insulation and stainless steel external cladding. This design represents a traditional and cost-efficient alternative to stainless steel tanks, which became standard in later years. Thanks to their large volume and isobaric capability, these tanks are particularly suitable for high-capacity production environments. As with all epoxy-coated vessels, regular inspection and renewal of the internal coating is required, depending on operating conditions. TECHNICAL DATA Manufacturer: Sirio Aliberti Year of Manufacture: 2005 Quantity: 8 units Type: Isobaric pressure tank Application: Fermentation, maturation, storage of carbonated beverages Capacity: 500 hl per tank Material: Base: Carbon steel Internal coating: Food-grade epoxy Insulation: Polyurethane External cladding: Stainless steel sheet Working Pressure: 6 bar Dimensions (per tank): Internal Diameter: approx. 3,200 mm External Diameter: approx. 3,450 mm Cylinder Height: approx. 5,250 mm Leg Height: approx. 1,200 mm Total Height: approx. 7,800 mm Guodey Hkkaopfx Ankob

Condition: used, Year of construction: 2018, Overview These fermenters (iso tank) were manufactured in 2018 by Germany BrauKon GmbH. The equipment consists of 3 fermenters, designed for beer fermentation. The tanks are still installed and connected to energy and are available immediately. The equipment can be visited in production on request. Technical data  Capacity: 10 hl each Application: Beer fermentation Configuration: 3 × iso fermenters   Gsdpfx Asywn Svsnkeub

Condition: used, Year of construction: 2012, Overview  This fermentation tank package was manufactured between 2012 and 2019 by Oxinox and Slowbeer. It consists of isobaric and atmospheric stainless-steel fermenters with different capacities. Personal inspection is possible. Technical data  Total tanks: 8 units Isobaric tanks: 5 units Atmospheric tanks: 3 units Material: Stainless steel (316-L for Oxinox tanks) Scope of Delivery  Isobaric Fermenter (4x) | Oxinox | Oxi-19 | 2019 | 1,600 L each Atmospheric Fermenter (3x) | Slowbeer | Plano 1200L | 2012 | 1,200 L each Isobaric Fermenter | Oxinox | Oxi Clooper | 2016 | 1,400 L   Guodpsyg R Aujfx Ankeb

Condition: used, Year of construction: 2014, Overview  This set of 6 isobaric fermentation tanks was manufactured in 2014 by the Spanish company Talleres Perman S.L.. Each tank has a capacity of 1,000 liters and is designed for fermentation and maturation under pressure, ideal for beer, cider or sparkling wine. The tanks have integrated cooling jackets and have decorative wooden cladding on the outside, which can be removed if necessary. The tanks are for sale as a planned increase in production was ultimately not realized. Available immediately. Technical details  Capacity: 6 x 1,000 liters Working pressure: up to 3 bar Diameter: approx. 125 cm Height: approx. 190 cm Base design: conical base with 30° angle Type: Isobaric fermentation and maturation tanks with cooling jacket With integrated cooling jackets With decorative wooden cladding (removable) Scope of delivery  6 x Talleres Perman DI1 | Year of construction 2014 isobaric fermentation and maturation tanks Guodpfx Aowzb T Ujnkeb

Condition: used, Year of construction: 2012, Overview  This set of ten stainless steel isobaric tanks was manufactured between 2012 and 2024 by the Spanish company EtD (Talleres Esteban Tolosa). The lot includes five fermenters and three lagering tanks, all pressure-rated at 3 bar. All tanks are in good condition, fully functional, and well maintained. The newer 2024 models have seen minimal use. The tanks can be purchased as a complete set or individually upon request. Technical data  Type: Isobaric fermenting and lagering tanks Manufacturer: EtD (Talleres Esteban Tolosa) Years of Manufacture: 2012 – 2024 Total Units: 10 (7 fermenters + 3 lagering tanks) Working Pressure: 3 bar Material: AISI 304 stainless steel Scope of Delivery  Fermenting Tanks 3× 45 hL (net 45, gross 47) | EtD | 2012 2× 50 hL (net 50, gross 55) | EtD | 2024 2× 50 hL (net 50, gross 55) | EtD | 2020 Lagering Tanks 3× 50 hL (net 50, gross 55) | EtD | 012 | Horizontal isobaric with carbonation stones Guodpsyb S A Sefx Anksb

Condition: used, Year of construction: 2015, Overview  This tank package was manufactured between 2015 and 2025 by Spanish manufacturers Inox GC and Magusa, as well as German company Linde AG. It includes multiple isobaric and atmospheric fermenters, an electric lifter and a hop torpedo for pressure dry hopping. Technical data & Scope of Delivery  Isobaric Fermenter (Unit 1) | Inox GC | — | 2016 | 1,500 L; cylindro-conical; isobaric; double refrigeration jacket Isobaric Fermenter (Unit 2) | Inox GC | — | 2016 | 1,500 L; cylindro-conical; isobaric; double refrigeration jacket Isobaric Fermenter (Unit 3) | Inox GC | — | 2016 | 1,500 L; cylindro-conical; isobaric; double refrigeration jacket Isobaric Fermenter | Inox GC | — | 2019 | 2,000 L; cylindro-conical; isobaric; dual glycol jacket Isobaric Fermenter | Inox GC | — | 2021 | 3,000 L; cylindro-conical; isobaric; dual-wall cooling Isobaric Fermenter | Inox GC | — | 2024 | 4,800 L; cylindro-conical; isobaric; Double jacket for glycol circulation; carbonation stone in the cone Atmospheric Fermenter (Unit 1) | Magusa | — | 2015 | 1,300 L; atmospheric; double cooling jacket Atmospheric Fermenter (Unit 2) | Magusa | — | 2015 | 1,300 L; atmospheric; double cooling jacket Electric Lifter | Linde AG | L14 | — | Electric; 1,400–1,700 kg load capacity Isobaric Hop Torpedo | Inox GC | — | 2025 | Approx. 50 L; vertical isobaric dry hopping vessel; new Gedpeyb S Dvefx Ankjub

Condition: used, Year of construction: 2002, Overview  This tank package was manufactured in 2002 by Spanish company Parcitank S.A., a recognized producer of stainless steel tanks for the wine and food industry. The nine tanks are suitable for fermentation or storage depending on their configuration. The set is offered as three packs, each consisting of one 20,000 L fermentation tank, one 15,000 L storage tank, and one 10,000 L storage tank. On request, single packs can also be purchased. All tanks are made of AISI 304 stainless steel and are in good condition. Technical data  Fermentation tanks - 200hl (3 units): Capacity: 20,000 L Diameter: 2,500 mm Cylindrical height: 4,000 mm Type: Atmospheric with cooling jackets Storage tanks - 150hl (3 units): Capacity: 15,000 L Diameter: 2,500 mm Cylindrical height: 3,000 mm Type: Atmospheric Storage tanks - 100hl (3 units): Capacity: 10,000 L Diameter: 2,000 mm Cylindrical height: 3,000 mm Type: Atmospheric Material: AISI 304 stainless steel Scope of Delivery 9 stainless steel tanks (3 × 200 hl, 3 × 150 hl, 3 × 100 hl) Optional: Sale in complete set or in 3 individual packs (1 × 200 hl + 1 × 150 hl + 1 × 100 hl) Gusdpfx Ansxbua Sskeb

Condition: good (used), The scope of delivery includes: 01x steel door, used Design: DIN - Right Material color: grey Total height: 2,210 mm Total width incl. frame: 750 mm Frame profile: RR 50x50 mm Total door height: 2,110 mm Total width door: 620 mm Door frame profile: RR 25x25 mm Mesh width: 105x22 mm Passage width: 645 mm Footplate dimensions: 140x50 mm Weight per unit: 25.76 kg Remark: Lever handle set and lock, as well as key are not included in the scope of delivery. Currently available from stock: 25 pcs. Your contact at our company: Mr.: Andre Evering Guedpfjtp Hkaex Anksb Mr.: Mario Klöver Mr.: Falk Deutsch General information about the item: This item is only offered for collection. Any further desired transportation or a shipment of this article is associated with additional costs, which can be requested separately depending on the place of delivery or scope of delivery.

Condition: used, Formwork nail, formwork nails, concrete nails, head bolts -Manufacturer: Würth, shuttering nail in magazines box with 100 pcs. -Type: SMA 106/10 54mm long Guedpfx Aoiqu R Senkob -Number: 61x box available -Price: per box -Dimensions cardboard: 120/100/H55 mm -Weight: 0.5 kg/box

Year of construction: 2013, condition: used, Complete production and filling plant for a pub brewery, consisting of the following components: 1. Milling plant Milling mill with malt feed hopper and pipe chain conveyor system for malt grist. 2. Brewhouse 2-unit brewhouse (Kaspar Schulz, built in 2013) as a brewing block with copper-clad stainless steel vessels. The wort is cooled by a separate plate heat exchanger (API Heat Transfer, built in 2013) with downstream wort aeration. There is also a hot water tank (Kaspar Schulz, 2013) with insulation and heating jacket. 3. Fermentation and storage cellar 4 cylindroconical fermentation and storage tanks (Kaspar Schulz, built in 2013) with a gross volume of 12 hl each and a maximum overpressure of 3 bar. 3 cylindroconical fermentation and storage tanks (Kaspar Schulz, 2013) with a gross volume of 25 hl each and a maximum overpressure of 3 bar. The temperature of these 7 cylindroconical fermentation and storage tanks is controlled by a common control cabinet. In addition, there are 2 further cylindroconical fermentation and storage tanks (Kaspar Schulz, built in 2013) with a gross volume of 14.7 hl each and a maximum pressure of 3 bar. The temperature of these two cylindroconical fermentation and storage tanks is controlled by another control cabinet. 4. Pressure tank cellar / serving cellar 5 upright pressure tanks (Kaspar Schulz, 2013) with clamp heads, each with a gross capacity of 10.5 hl and a maximum pressure of 3 bar. 5. Filling room Siphon filler/glass bottle filler (JS Maschinen) with 6 filling heads. Keg interior and exterior washer (Scheuer) with spray nozzles in stainless steel housing and lye tank in the base. Keg filling station with taps for direct filling of kegs from the pressure tanks. 6. Operating/supply technology Refrigeration system (Hafner-Muschler, 2013) as an ice water storage system with R404a refrigerant and 3 refrigeration compressors. Oil-free compressed air piston compressor (Kaeser, 2013) with a maximum operating pressure of 10 bar and compressed air refrigeration dryer (Kaeser, 2013). Air separator (AST) as nitrogen generator with adjacent nitrogen pressure tank. Additional title: complete brewing plant with copper-clad brewhouse Gedpfsy Nm I Hsx Ankeub Cast wort capacity: 10 hl Features: grain mill, malt transport system, 2-unit brewhouse made of stainless steel (copper clad), wort cooling, hot water tank, 9 fermentation tanks (4 x 12 hl, 3 x 25 hl, 2 x 14.7 hl), pressure tanks (5 x 10.5 hl), siphon filler, keg washing system, keg filling station, compressed air system, refrigeration system, N2 generator,

Condition: used, Brewing plant with a wort output of 20 hl, consisting of the following components: 1. grist plant (Joh. Albrecht, 2000, 500 kg/h) with mill, malt hull, floor scales, grist conveyor and control cabinet 2. 3-device compact brewhouse with insulated stainless steel vessels with copper bonnets, spindle station and control cabinet 3. fermentation and storage cellar with 4 x fermentation vats (Joh. Albrecht, 1999, 25 hl), 1 x fermentation tank (Nerb, 2002, 50 hl, 0.99 bar), 5 x storage tank (Joh. Albrecht, 1999, 44 hl, 0.99 bar) and 6 x storage tank (Joh. Albrecht, 1999, 22 hl, 0.99 bar). All tanks with jacket cooling. 4th pressurised tank cellar with 2 x pressurised tank (Speidel, 2021, 86 hl, 3 bar), 1 x pressurised tank (INOX, 2018, 67 hl, 3 bar) and 4 x pressurised tank (Joh. Albrecht, 1999, 12 hl, 2.5 bar). All tanks with jacket cooling. 5. keg cleaning and filling system (BTB. Multimat MT/2, 1997, 17-20 kegs/h) 6. refrigeration system as ice water generator (Joh. Albrecht, 1999, cooling capacity 14.5 kW) 7. steam generator with soft water system (Jumag, 2000, 224 kg/h steam, oil-heated) 8. 40 hl hot water tank (Joh. Albrecht, 1999), heatable, with switch cabinet Interested in only part of the system? The system is offered as a consignment sale. A partial sale might be possible – feel free to contact us and submit your offer. Gusdpfx Aswgc Udenkob Additional title: cast wort volume 20 hl, years of manufacture 1997-2001 Cast wort capacity: 20 hl Features: Grist system; 3-device compact brewhouse; fermentation vats; fermentation, storage and pressurised tanks; keg system; refrigeration system; steam generator, warm water tank, CO2 liquid gas tank

Condition: used, Year of construction: 1992, Storage cellar consisting of 8 vertical tanks with temperature control. Additional title: coolable stainless steel tanks Guedpfx Ajvcqthonkob Features: 8 storage tanks (6x approx. 165 hl, 2 x approx. 175 hl), temperature control, paneel, blending apparatus

Condition: used, Year of construction: 1986, Fermentation cellar with 4 coolable stainless steel tanks. Tank 1-3: C. Gresser, 1986, gross volume 204.60 hl. Tanks standing on 4 legs, each with 2 frame cooling zones, dished bottoms and central outlet. Equipment in each case: safety valve, cleaning line, CIP spray head, sampling tap, manhole in the frame and sight glass in the tank dome. Tank 4: C. Gresser, 1986, gross volume 115.69 hl. Tank standing on 4 legs with frame cooling, dished bottom and outlet pipe. Equipment: Cleaning line, CIP spray head, sampling tap, manhole in the frame. Additional title: coolable stainless steel tanks 3 tanks each: 205 hl 1 tank each: 116 hl Material: stainless steel Position: vertical on 4 feet Features: Cooling jackets, cleaning lines, CIP spray heads, discharge lines, safety valves, sampling taps, manholes, sight glasses Guodpfx Aovcq Dtenkjb

Condition: used, Fermentation cellar with tanks, equipped with 2 dished heads. - 2 tanks with 83 hl gross content each, with 2 x cooling zones - 4 tanks with 52 hl gross content each - 2 tanks with 79 hl gross capacity each. Additional title: Years of manufacture 1991 - 1993 Guedpfx Anoxbn Rkskeb Features: 2 Tanks, each 79 hl; 4Tanks, each 52 hl; 2 Tanks, each 83 hl

Year of construction: 1999, condition: used, Ice water generator for cooling supply of wort cooler (2nd stage), fermentation cellar (= 100 hl capacity), storage cellar (= 320 hl capacity) and pressure tanks (= 260 hl capacity) in a microbrewery with 20 hl output. Additional title: ice water generator Godpfexwy Sfsx Ankeub Cooling capacitry: 14 kW Power: 6,2 kW Length: 1600 mm Width: 1600 mm Height: 1800 mm Position: free standing Base construction: cylindrical tank with refrigeration unit on top, on square tube frame with domes Features: insulated stainless steel tank with side cover, semi-hermetic reciprocating piston compressor, copper tube coil exchanger, control box, cooling water pump