Used Stair Aid for sale (1,294)

Condition: like new (used), functionality: fully functional, Year of construction: 2018, machine/vehicle number: DN2693/4533, Technical data: IHF Jungenthal manipulator, handling device, lifting aid, lifting arm Model Vector 130 (130 kg payload) Manipulator available in quantities of 2!!! Payload at full extension: 30 kg (dependent on equipment/configuration) Height: approx. 4.2 m Upper arm: approx. 3.2 m Reach: approx. 1.6 + 1.9 m = 3.5 m to the articulated arm (height 2.1 m) Working radius 2.4 m, lift 1.4 m Total weight approx. 600 kg Mounting plate 75 x 75 cm Mounting/attachment equipment for tire handling (see pictures) Ljdozv Et Ejpfx Ahkerr Swivel range 360° Manipulator is disassembled and immediately available. Item location is 75053 Gondelsheim See pictures Shipping via freight forwarder or collection only by prior appointment.

Condition: like new (used), functionality: fully functional, Year of construction: 2018, machine/vehicle number: DN4407, Technical data: IHF Jungenthal manipulator handling device, lifting aid, lifting arm Model Vector 180 (180 kg payload) Lrodpezv E Dwofx Ahkor Payload at full extension 75 kg (dependent on equipment/configuration) Height: approx. 3.75 m Upper arm length: approx. 3.2 m Reach: approx. 1.5 + 1.35 + 0.8 m = 3.65 m, articulated arm (height 2 m) Working radius 2.4 m, lift 1.4 m Total weight approx. 750 kg Dowel plate 75x75 cm Attachment/mounting equipment for round material/shafts, etc. (see images) Swivel range 360° Manipulator is disassembled and immediately available. Item location is 75053 Gondelsheim See images Shipping by freight forwarder or collection only after prior arrangement.

Condition: excellent (used), Year of construction: 2007, machine/vehicle number: DN1729, Technical data: IHF - Ingersoll Rand - Quick Lift QLA 75-S-GM manipulator handling device, lifting aid Payload at full extension 75 kg, at the gripper 25 kg Overall height approx. 3.1 m Reach: approx. 2 + 2 m Lifting height: approx. 0.2 - 1.4 m Total weight approx. 400 kg Swivel range 270° + 90° (via articulated arm), connection to 400V 16A With a pneumatic magnetic gripper (16 magnets), you can pick up or position steel workpieces, thereby automating your process. The crane is disassembled and immediately available. The item is located in 75053 Gondelsheim. Other cranes are available, with load capacities from 80 to 5000 kg; please inquire. See pictures. Lrsdpfszv Hw Ejx Ahker Shipping by freight forwarder or collection only by prior arrangement.

Condition: excellent (used), Year of construction: 2007, machine/vehicle number: DN1741, Technical specifications: IHF - Quick Lift QLA 75-S-GM manipulator, handling device, lifting aid Load capacity at full reach: 75 kg, at the gripper: 25 kg Overall height: approx. 3.1 m Reach: approx. 2 + 2 m Lifting height: approx. 0.2 - 1.4 m Total weight: approx. 400 kg Swivel range: 270° + 90° (via articulated arm), connection to 400V 16A With a pneumatic magnetic gripper (16 magnets), you can pick up or position steel workpieces, thereby automating your process. Lodpfx Ajzv Hxpehkorr The crane is dismantled and immediately available. The item is located in 75053 Gondelsheim. Other cranes are available, with load capacities of 80-5000 kg; please inquire. See pictures. Shipping via freight forwarder or collection by appointment only.

Condition: new, maximum load weight: 27,890 kg, overall weight: 36,000 kg, axle configuration: 3 axles, loading space length: 13,530 mm, loading space width: 2,480 mm, loading space height: 2,730 mm, loading space volume: 92 m³, total width: 2,550 mm, total height: 4,000 mm, Year of construction: 2026, Equipment: ABS, Brand new 3-axle Knapen SANH sliding floor trailer * BPW 9-tonne ECO Air HD rigid axle with disc brakes 430, 10-bolt, offset 120 * TireCheck tire pressure monitoring system * Smart Board * 1st axle: lift axle including starting aid * Steel rims with rim size 22.5" x 11.75 * Krone TRUSTED KT 231 385/65R22.5 164J 3PMSF tires * Gearbox-supported winch with thrust compensation * Swinging mud flaps * Plastic tool box 1000x500x500mm * 28 L water tank with soap dispenser * Long aluminum ladder * Extendable stairs with platform at the rear of the trailer * Broom and shovel holder, CARGOFLOOR CF-500 SL-C system, electronic operation * Diamond-patterned aluminum floorboards, 10 mm, 21 boards * Wear plates at the ends of the floor profiles, 350 x 3 mm * Stainless steel plate at the rear under the floor * Platform on the front wall with ladder * Moving bulkhead * Rear doors with external locking bars, one locking bar per rear door * Foldable "A" sign on the left rear door * Tarpaulin with side straps and tensioning ratchets under the trailer * Fixed side on the right, overhang on the left approx. 400 mm * Tarpaulin 900 gr./m2 * 3-position tarpaulin supports (4 pieces) * Side wall protection tarpaulin mounted in the keder on the left side wall, including fixed roll-up mechanism at the front, color: dust gray, RAL 7037 * 2 ECOLED III rear lights, completely LED * LED side marker lights flash simultaneously with the turn signal * 3 pairs of additional work lights * Acoustic reversing warning * Remote control for floor, lift axle, and work lights * Hydraulic connections on the front wall and at the kingpin supports * Air connection 7.2 mm, "workshop connection" Lredpfxszn Drdo Ahkjr * Tarpaulin similar to RAL 9006 WHITE ALUMINUM * Body RAL 7011 IRON GRAY * Chassis galvanized, not painted * A-frame painted in RAL 7011 IRON GRAY * Also available as a rental vehicle Inquire about our attractive financing options.

Condition: excellent (used), Year of construction: 1998, Hofmann HT 200 U frame dowel and elongated hole drilling machine with angle adjustment. Special drilling machine for staircase construction, window construction, and universal applications through pneumatic height adjustment. Angled dowel drilling and picket drilling can be easily performed thanks to the rotatable drilling unit. Motor with pole changeover, two speeds. Motor power 1.5 / 1.8 kW, 1400 / 2800 rpm. Motor start with a practical handle switch. Precision chuck with two inserts, 16 mm and M10 thread. Table size approximately 1100 x 240 mm. Linear laser for precise positioning of the workpiece. Drilling unit can be rotated 65 degrees to the left and right. Pneumatic adjustment of the processing height, dowel drilling on two levels without retooling. The desired drilling heights can be set for each drilling level using a handwheel and digital counter; the changeover is then performed pneumatically from the front. Cross adjustment approximately 320 mm, stepless or in a 12 mm grid. Drilling stroke approximately 200 mm. 2 pneumatic workpiece clamps, can be positioned at the front and rear of the table. Lrodpfx Ahsyfta Tokjr 2 swiveling workpiece supports. 2 side stops, also usable as a front support. Undercarriage. Dust extraction connection 80 mm. 4 used but good drill bits, 9, 12, 16, 19 mm. Few paint spots have been touched up; very good condition, see original photos. A used, swiveling elongated hole drilling machine in this condition is rarely available. CE marking. Operating manual. Dimensions approximately 1200 x 1200 x 1200 mm (L x W x H), weight 310 kg. The machine can be demonstrated on site after prior arrangement. We only offer machines that are ready for demonstration and are in stock, see "other offers from this provider".

Condition: used, Year of construction: 2005, functionality: fully functional, machine/vehicle number: 8481-05-K951, Edge finishing with fine grinding We used this machine to process stair treads. 6 processing units: 1 x coarse grinding of the surface 2 x fine grinding of the surface 3 x profile milling on the top 4 x profile milling on the bottom 5 x profile grinding on the top 6 x profile grinding on the bottom Automatic feed – speed can be adjusted continuously Material thickness sensor Lsdpfxezv Eaxj Ahkerr The machine is equipped for processing stair treads with an edge rounding of r=8mm on the top and bottom (individually controllable). After cutting the treads to size on the circular saw or CNC machine, we completed the processing of the treads in a single pass from the top and bottom. The machine can also be adapted for other profiles, radii, or milling operations.

Condition: excellent (used), Original Stryker Stair-Pro stair chair, model 6252, designed for the safe transport of patients up and down stairs. Equipped with a track system that significantly reduces the effort required by rescuers and increases control during descent. Robust aluminum construction, high load capacity (approx. 227 kg), complete set of safety belts, and foldable components for ease of transport and storage. The equipment is fully operational, complete, and in very good visual condition – ready for immediate use. Made in the USA. Ideal for EMS teams, fire departments, hospitals, ERs, and nursing homes. Key features: • Model: Stair-Pro 6252 • System: track system (safe stair descent) • Load capacity: up to approx. 227 kg • Construction: lightweight and durable aluminum frame • Safety: securing belts, stable handles • Condition: used, very good, fully functional Lredpfx Ajx N Idcohkor • Manufacture: Made in USA

Condition: used, Year of construction: 2024, Manufacturer : WAM MAP Model : WBHC Year : 2024 Type: Ploughshare mixer Material: stainless steel Condition: new Volume : 300 L Number of ploughshares: 6 Lrsdpszv Uzljfx Ahker Motor power: 9.2 kW Dimensions: 210 x 90 x 77 cm Control electrical cabinet with variable speed drive. Optional: chopper; original plugin connector available. Optional extras: original platform + stairs. Photos available on request.

Condition: excellent (used), Year of construction: 2014, functionality: fully functional, working width: 450 mm, warranty duration: 12 months, total height: 220 mm, total width: 460 mm, total length: 880 mm, water tank capacity: 10 l, We offer for sale a BR 45/10 Esc Staircase Scrubber Condition – Very good Year of manufacture – 2014 The machine is in very good condition – both visually and technically. It has undergone a complete, thorough overhaul, making it fully functional and ready for operation. Each device we offer is presented in authentic photos – you are buying exactly the machine shown in the pictures. All machines purchased from us come with a 12-month WARRANTY. Technical Data: Brush working width (mm): 450 Working/suction width (mm): 450 Tank capacity (l): 10 Brush rotation speed (rpm): 290 Brush motor power (W): 190 Vacuum motor power (W): 1500 Voltage (V): 220 / 240 Frequency (Hz): 50 Weight (kg): 44 Lrsdpfx Ahjw Igrzeksr Dimensions (L x W x H) (mm): 880 x 460 x 220

Condition: excellent (used), Year of construction: 2022, functionality: fully functional, travel distance X-axis: 3,600 mm, travel distance Y-axis: 1,100 mm, travel distance Z-axis: 900 mm, controller model: HEIDENHAIN TNC 640 CELOS, rotational speed (min.): 20 rpm, rotational speed (max.): 10,000 rpm, DMG MORI DMF 360|11 linear – Traveling Column Milling Machine For sale is a DMG MORI DMF 360|11 linear with extensive equipment and a HEIDENHAIN TNC 640 / CELOS control system. Technical data Travel ranges X-axis: 3,600 mm Y-axis: 1,100 mm Z-axis: 900 mm Rapid traverse rate X/Y/Z: 80 / 60 / 60 m/min Linear drive in the X-axis Milling head / Spindle NC swivel milling head, B-axis Spindle speed: 20 – 10,000 rpm Spindle power: 44 / 32 kW Torque: 288 / 187 Nm Tool holder: SK50 / DIN ISO 7388-1-A50 Tool magazine 120 tool positions Chain magazine with dual gripper Mechanical setup aid for tool loading Work table Fixed table with integrated rotary table Rotary table: Ø 1,050 mm Rotary table arranged on the left side Max. load capacity of rotary table: 1,200 kg Lodpszv Egljfx Ahkorr Hydraulic clamping Control system HEIDENHAIN TNC 640 CELOS 21.5" ERGOline® Control Multi-touch screen Equipment / Options Internal coolant supply 40 bar / 980 l Paper band filter Chip conveyor HEIDENHAIN TS 460 infrared measuring probe Preparation and software option for 3D quickSET MPC – Machine Protection Control Compressed air through the spindle center Oil and emulsion mist extraction system, 2 × 1,600 m³/h 2 rotating viewing windows Purge air for linear measuring systems Direct measuring systems Active cooling for main spindle and linear motor Automatic door drive Electronic handwheel IoTconnector Machine Data Connector (OPC UA / MTConnect / MQTT) NETservice Machine can be inspected by arrangement. Further information, photos and videos available on request.

Year of construction: 2024, condition: like new (used), functionality: fully functional, The packing aid for a folding carton gluing machine is in like-new, ready-to-use condition. We no longer need it because our setup requires a left-hand discharge. Ledpfexgpd Aox Ahkjrr

Condition: used, overall weight: 800 kg, working height: 2,201 mm, BPL – Flexi-Lifter Brubek B.V. Mobile lifting aid Vertical lift: 1,950 mm Fast product pick-up, lifting, rotation, and transfer User-friendly operation of the load lifter Mobile crane with a small footprint The system operates exclusively with compressed air One-hand control unit integrated into a handle above the hook The lifting cable is visible for half its length – the other half runs inside the column Weight: 800 kg Product or load: length = 400 mm, width = 150 mm Radius: 3,000 mm Maximum load weight: 30 kg Operating height when depositing: 1551 Minimum operating height: 251 Maximum operating height: 2201 Dimensions: 3.7m x 2.4m x 1m Flexible lifter with base plate (dimensions approximately 1.0 m x 1.0 m) Lodpfx Ahozil Sbjkorr An inspection while the equipment is powered can be arranged after prior appointment. Price upon request All technical specifications are subject to printing errors/mistakes. Sale exclusively to countries within the EU.

Condition: used, 4m Length, 670 working height, 850 minimum stroke. 8 x Cramping bars at 500mm centres 3 x Hyrdaulic cylinders via motorised pump with starter Suitable for open plan and wedged stairs Lrodpfoymm Sfsx Ahkor

Condition: like new (used), Year of construction: 2005, functionality: fully functional, GÖTZINGER RBS Dowel and Stair Drilling Machine, Swiveling with Laser In very good condition, the machine has been used very little and is in absolutely like-new condition; it comes from an educational institution. It can be used to drill dowel holes and similar. The machine has a BKF-5 drilling head with 5 drill chucks, M10 internal thread. The distance between the drill chucks is 32 mm horizontally and 25 mm vertically. Lrodpfxszgh Tve Ahkor The entire drilling head can be swiveled 360° with a degree indicator and various scales. A standard 2-jaw chuck can also be used. You will also receive 3 additional drill chucks for drills with a cylindrical shank of 12 or 16 mm, and for drills with an M10 external thread. The machine table is 1100 mm wide and 250 mm deep. There is a stop at the front that can be recessed if needed. For the production of dowel joints, there are 2 adjustable angle stops on the machine table, which can be set with an accurate scale. In addition, there are two 2500 mm long stop rails with 2 folding stops and a scale each; these stop rails can be mounted on the left and right. The machine drills completely automatically, which was problematic with larger drill diameters. For this reason, the machine has been converted to manual feed via a feed lever and switch. The workpiece is clamped with 2 pneumatic clamping cylinders; the switch is located directly on the clamping cylinder. 380V, 2100W 2820 rpm Year of manufacture: 2005 Weight: approx. 300 kg With this machine, you can produce all types of frame dowel joints, at right angles, butt joints, and miter joints. Ideal for the production of dowel joints in timber frame construction, furniture, door and window construction, and similar applications. Stairs can be manufactured very well due to the swiveling capability. The drilling unit can be swiveled to both sides up to 65° with a scale and has a detent at 0°. This allows handrails to be drilled very well into stair stringers with the machine. Due to the stops, the drilling head, and the construction of the machine, dowel joints are produced in a very short time, which makes the machine very economical. The machine requires a compressed air connection of 6 bar (the air consumption is very low). Right-hand rotation. Mills and drills very well and cleanly. The linear laser at the top of the machine allows marked dowel holes and angles to be drilled very quickly and accurately. The max. drilling height is 100 mm; the drilling height is adjusted at the front under the machine table with a handwheel. The height can be read on a very precise, mechanical counter. The max. drilling hole depth is 190 mm with a stop and scale. The max. workpiece height is 360 mm. Everything functions perfectly. Comes with a manual. We will personally deliver and demonstrate the machine anywhere in Germany for 220.00 euros. This means you have no risk when purchasing. Delivery to Austria and the rest of the EU is also possible upon request. Professional equipment, not hardware store junk. You can start working with the machine immediately. Very stable and durable construction. The precision guides with the backlash-free ball bearing bushings are in good condition and move easily. The swiveling mechanism is also very smooth due to the 2 groove ball bearings; locking is possible with a locking screw.

Condition: excellent (used), Year of construction: 2023, functionality: fully functional, power: 44 kW (59.82 HP), pressing force: 500 t, stroke length: 300 mm, operating speed: 9 mm/s, throat depth: 400 mm, clearance between the columns: 5,050 mm, total length: 7,500 mm, total width: 4,200 mm, total height: 5,900 mm, overall weight: 67,000 kg, T1 and T1 bending aid for supporting arm EASY FORM angle measuring and correction system Oil tank, 650 liters Set of universal LVD tooling Lightly used under power in Germany New price: EUR 650,000 Max. bending length: 6100 mm Distance between columns: 5050 mm Max. pressing force: 500 tons Distance beam to table: 570 mm Beam stroke: 300 mm Table width: 200 mm Ljdpfszuyyqjx Ahkjrr Throat depth: 400 mm Approach speed: 100 mm/min Working speed: 9 mm/min Return speed: 80 mm/min Adjustment of X-axis back gauge: 1000 mm Number of controlled axes: 9 Control: TOUCH Crowning: Yes Hydraulic tool clamping: Yes Power: 44 kW Length: 7500 mm Width: 4200 mm Height: 5900 mm Weight: 67,000 kg

Year of construction: 2023, condition: ready for operation (used), A Herzog two-head square braiding machine is available. Number of carriers 1/2: 12/16, tandem carrier configuration: 8, horn gear diameter: 150mm/200mm, speed 1/2: 175rpm/131rpm, bobbin diameter: 55mm, bobbin height: 130mm, bobbin capacity: 265cm³. Including 2x change gears, 2x double gears, 28x bobbins, 28x thread tension springs, 2x take-off discs, 6x wooden drums, 8x carrier tubes, 2x braiding plates and one carrier guard. The machine has only been operated for a few thousand running meters and is therefore in very good, near-new condition. Documentation available. An on-site inspection is possible. Lrodpfx Aszqfx Djhksr

Year of construction: 2014, condition: ready for operation (used), A Niehoff double twist stranding machine is available. Spool size: 630mm, max. spool width: 475mm, copper processing range: 0.09mm²-6mm², single wire diameter: 0.05mm-0.85mm, max. speed: 6000rpm, max. tensile force: 200N, machine dimensions X/Y/Z: approx. 3000mm/1700mm/1600mm, weight: approx. 3000kg, operating hours: approx. 7371h. Including frame and some accessories as well as spare parts. Documentation available. An on-site inspection is possible. Lrsdpfx Aoy I Ac Rshksr

Condition: used, mileage: 596,810 km, power: 368 kW (500.34 HP), first registration: 01/2018, fuel type: diesel, overall weight: 26,000 kg, axle configuration: 3 axles, next inspection (TÜV): 10/2026, color: white, gearing type: automatic, emission class: euro6, total width: 2,550 mm, total height: 3,650 mm, Equipment: ABS, air conditioning, electronic stability program (ESP), navigation system, parking heater, Vehicle Data: * Manufacturer / Model: MAN TGX 26.500 6x2-4 BL * Gross Vehicle Weight: 26,000 kg * Engine: MAN D2676LF51, 500 hp (368 kW), Euro 6, 2,500 Nm * Transmission: MAN TipMatic® 12-speed (Profi, road application) * Drive: 6x2 * Steerable, liftable trailing axle Chassis & Technology: * Trailing axle steerable & liftable * Rear air suspension & ECAS level control * Rear axle differential lock * Axle load display in cab * Electronic braking system MAN BrakeMatic * All-round disc brakes * EVBec engine brake * Power take-off flywheel side (for hydraulics/pump) * Rockinger 400G150A trailer coupling Safety & Assistance Systems: * Emergency Brake Assist 2 (EBA2) * ESP, ABS, ASR * Lane Guard System IV (lane departure warning) * Cruise control & electronic speed limiter (89 km/h) * Digital axle load display * Emergency brake signal (ESS) Cab & Comfort: * Medium-high sleeper cab * Air-suspended cab mounting * 2 bunks with comfort mattresses * Driver comfort seat, air-suspended, heated, with lumbar support * Air conditioning with automatic temperature control * Eberspächer D4S auxiliary air heater * Refrigerator, ambient lighting, full curtains * Electric tilting/sliding sunroof * Multifunction steering wheel Lighting & Visibility: * LED daytime running lights * LED position & tail lights * High beam & fog lights with cornering light * 2 work lights on cab roof * 2 amber rotating beacons * Reversing camera * Electrically adjustable & heated mirrors incl. kerb mirror Multimedia & Connectivity: * MAN Media Truck Advanced (7" display) * Navigation-ready + Europe navigation SD card * Digital radio DAB+ * Bluetooth hands-free (2 phones) * USB / AUX * MAN TeleMatics 2 preparation * Digital tachograph (legal for calibration, remote download-ready) Miscellaneous: * Fuel tank 590 l aluminium + 80 l AdBlue * Compressed air connection in cab * First aid kit, warning triangle, wheel chocks * CB radio Stabo XM3003e * Cab: Pure White (RAL 9010) * Chassis: Graphite Black (RAL 9011) * Rims: White Aluminium (RAL 9006) * Unladen weight: 11,750 kg * Tyres 1st & 3rd axles: 385/55 R 22.5 * Tyres 2nd axle: 315/70 R 22.5 * Palfinger T20-31 hookloader * MOT: 10/2026 Ledpfxozwbtdo Ahkjrr * Safety inspection: 04/2026 ----Internal vehicle number: 11627 Subject to errors & prior sale. WhatsApp support available! For any questions about the vehicle or further information, feel free to contact us conveniently via WhatsApp. WhatsApp WhatsApp

Condition: excellent (used), Year of construction: 1995, CNC machine in good condition due to limited use. Previously used for door production but can be used for any purpose. Double table, can be loaded from the left and right. Lrsdpfx Aeig T Epshksr 4-axis x 5000 mm y 1350 mm z 450 mm a 190° Main spindle SK 40, 8 kW, water-cooled Up to 17,000 rpm Chain magazine with 24 positions.

Condition: used, mileage: 65,785 km, power: 125 kW (169.95 HP), first registration: 11/2023, fuel type: diesel, overall weight: 3,025 kg, color: grey, gearing type: automatic, emission class: euro6, number of seats: 3, total length: 5,050 mm, total width: 2,023 mm, total height: 1,977 mm, loading space length: 2,602 mm, Year of construction: 2023, Equipment: ABS, air conditioning, central locking, electronic stability program (ESP), navigation system, soot filter, Errors and omissions excepted! Internal number: 1007. PJ59452 ----EQUIPMENT * Trailer coupling, preparation kit - Electrical preparation kit for trailer coupling - Wiring harness, 13-pin socket and trailer module for retrofitting a trailer coupling * Rear window, heated, fixed - Interior mirror - Partition with window * Rear window wiper incl. windshield washer nozzle and automatic activation when reversing * Fuel tank 70 liters * Paint: Metallic * Technology Package 5 - Exterior mirrors with turn signals, electrically adjustable, heated and folding - Audio system 13, multifunctional display, Ford SYNC 4 incl. navigation. Blind Spot Information System incl. CTA, Rear Cross Traffic Alert, Pre-Collision Assist, camera and radar-based, Driver Fatigue Warning, Lane Keeping Assist incl. Lane Keeping Aid and Lane Change Assist, Traffic Sign Recognition, Wrong-Way Driving Warning, Park Distance Control front/rear, Adaptive Cruise Control, S&Go Intelligent Speed Limiter with Speed Display, Rearview Camera, Steering wheel, Sensico in leather look * Radio: Ford audio system with 13-inch multifunctional display and Ford SYNC 4 incl. navigation - Digital radio reception DAB/DAB+ (Digital Audio Broadcasting) - 13-inch TFT multifunctional display - Integrated control panel and audio remote control on the steering wheel - Ford SYNC 4 with AppLink and touchscreen - AppLink - Amazon Alexa Built-in voice assistant * Socket: 12-volt socket in the cargo area (D-pillar) * Partition (metal) with window * 2-stage release for passenger compartment and cargo area (rear doors or rear swing door). Prevents locking of open doors * Anti-lock braking system with electronic brake-force distribution (EBD) * Airbag (passenger side) * Airbag driver side * Exterior mirrors with integrated turn signals - electrically adjustable, heated and automatically folding - incl. power windows front, electric, with quick-up/down function for driver and passenger side * Exterior mirror housings in vehicle color * Battery: H7 AGM single battery * On-board computer with consumption and mileage information (e.g. remaining range) and outside temperature display * Roof, flat * Roof console * Double-wing rear door with 180° opening angle (without window) * Tachometer * Third brake light * Electronic Stability Program (ESP) - Hill Start Assist - Emergency Brake Assist (EBA) - Traction Control (TCS) * Power windows front, electric - with quick-up/down function for driver and passenger * Parking brake, electronic * Ford Key Free system - incl. Ford Power Start function (keyless locking/unlocking and starting) * FordPass Connect - incl. live traffic information and 5G WLAN hotspot - Information about the current status or location of the vehicle and control of selected vehicle functions via smartphone with the FordPass app - Current traffic information in real time (in conjunction with the navigation system) - WLAN hotspot (up to 5G/LTE, for up to 10 mobile devices) - Further information on FordPass Connect can be found at/ Lrjdpsxrxawjfx Ahkor * Windshield, heated * Transmission: 8-speed automatic * Grab handle, driver and passenger side * Glove box with lockable lid * Interior lighting front with delay function * Automatic climate control front - with recirculated air heating - with R-1234yf refrigerant * Headrests 3x * LED headlights - LED high beam - LED low beam - LED daytime running lights incl. integrated LED turn signals front - Cornering lights, static - High beam

Condition: refurbished (used), Year of construction: 2001, functionality: fully functional, Stair milling machine SELECT 20300. Ljdpfxjv H D Tvj Ahkorr Simply, quickly and precisely mortise steps and risers into stair stringers and posts. You can adjust the step length, step thickness, riser thickness, tread height and step nose. The machine has been completely overhauled and is technically in mint condition. Newly painted.

Condition: ready for operation (used), Year of construction: 2011, travel distance X-axis: 3,060 mm, travel distance Y-axis: 1,260 mm, travel distance Z-axis: 100 mm, number of axes: 3, overall weight: 3,350 kg, spindle motor power: 9,000 W, spindle speed (max.): 24,000 rpm, This 3-axis FELDER PROFIT H 20 CNC Wood Machining Centre was manufactured in 2011. It features a working range of 3,060 mm in the X-axis and 1,260 mm in the Y-axis, with a maximum speed of 24,000 rpm. The machine includes 14 vertical drilling spindles and 4 horizontal drilling spindles in the X-direction. If you are looking to get high-quality wood machining capabilities, consider the FELDER PROFIT H 20 machine we have for sale. Contact us for further details. • Number of Milling Spindles: 1 • Main Motor: 9 kW • Torque Support: Included • Tool Clamping System: HSK-F63 • Tool Changer Positions: 8 • Linear Changer: Included • Vertical Drilling Spindles: 14 • Horizontal Drilling Spindles X: 4 • Horizontal Drilling Spindles Y: 2 Lodpfxozvca Aj Ahkjrr • Grooving Saw: In X-direction • Positioning Aid: Included • Crosshair Laser: Included • Vacuum Pump: Included • Number of Vacuum Pumps: 1 • Vacuum Pump Capacity: 90 m³/h • Safety Device: Safety mat (Trittmatte) • Tool Change Helper Device: Included • Workpiece Support Aids: Included • Pendulum Machining: Included • Control Unit: TPA ALBATROS • Software: TPA ALBATROS 2 • Total Connected Load: 15 kW

Condition: used, Year of construction: 2011, X-Y working area: 4,422 x 1,753 mm X-Y travel: 4,955 x 1,918 mm Z-axis travel: Z = 400 mm 5-axis MORBIDELLI milling spindle C-axis rotation: 650° B-axis tilt: 290° (-10°) Power: 11 kW at 20,000 rpm, adjustable via inverter Liquid cooling HSK 63F interface Chip conveyor Automatic CNC central lubrication RAPID 24 tool changer (24 tool positions) Drill head extension with 30 + 6 spindles 8 positioning aids 2 cross lasers Vacuum pump 250 m³/h PC control with Windows Office Weight approx. 5,000 kg Storage location: Customer Ledey D Rv Depfx Ahksrr

Condition: good (used), Year of construction: 2014, Various staircases – used: Price per step: €95.00 (net), disassembled, packed, and loaded at the storage location! Pos 2+3: Wide, with 6 steps Pos 4: Wide, with 6 steps Pos 7: Narrow, with 13 steps and a “door” Pos 9+10: Wide, with 14 steps Pos 11: Wide, with 15 steps Pos 13: Wide, with 13 steps Pos 13a: Wide, with approximately 7 steps Lrodpfx Ahszqz Saokjr Manufacturer: Stow Type: unknown Year of manufacture: 2014 Steps: Galvanized grid grating Stringers and handrails painted Condition: good Available: approximately Q4/2026 Location: Hamburg