Used Staircase Formwork for sale (115)

Condition: excellent (used), functionality: fully functional, For sale is an extensive, complete scaffolding lot suitable for professional building construction and façade work. System Façade Scaffolding Working Scaffold Reinforcement Scaffold Eaves-Side Scaffold Hjdpfxjycfyys Adaoh Ideal for scaffolding companies, construction businesses, or for expanding existing scaffolding inventories. The material is systematically listed and registered. Numerous additional components are included. System: SL 70 / SL 100 Total area: approx. 8,000 m² scaffold surface Total weight: approx. 105,000 kg Main components included (excerpt): Frames & Supports: SL 70 Vertical Frames: 200 × 70 / 150 × 70 / 100 × 70 / 50 × 70 SL 100 Vertical Frames: 200 × 100 / 100 × 100 Decks & Platforms: Wooden Decks: 300 × 32 / 250 × 32 / 200 × 32 / 150 × 32 / 100 × 32 / 70 × 32 Steel Decks: 300 × 32 / 150 × 32 Guardrails & Safety: Rear Guardrails: 300 / 250 / 150 Double-Sided Guardrails SL 70 / SL 100 Side Guardrail Frames SL 70 / SL 100 Guardrail Post Supports / Guardrail Posts Top Deck Safety Barriers Diagonals & Bracing: Diagonals 300 × 200 Diagonals 250 × 200 Accessories & Special Parts: Toe Boards: 300 / 250 / 150 Adjustable Base Plates: 30 / 50 / 60 / 80 Spacers / Distance Tubes Roof Edge Protection SL 70 / SL 100 Weather Protection Roof ALU Access Hatch Decks with Ladder Cantilever Beams: 32 / 64 / 74 Alu-Staircase + Guardrail 2.50 m 610 Steel Lattice Beams Couplers (Swivel / Right-Angle Coupler) A detailed parts list is fully available (see photo). Further accessories available. Condition: Used, fully functional System-compatible scaffolding material Suitable for professional construction site use Location: On request Inspection: By appointment Loading & transport can be organized Sale preferred as a complete lot or in large batches

Condition: used, Year of construction: 2005, Make: ARISA, Model: LD8-4-2000-470-230-LDE, Year of manufacture: 2005, Serial No.: 820016341, Press control system: Siemens, Type: Sinumerik 840D, Pressing force: 1,800 t, Table clamping surface: 4,500 x 2,300 mm, Ram clamping surface: 4,500 x 2,300 mm, Ram stroke: 750 mm, Ram adjustment: 400 mm, Die height min.: 900 mm, Die height max.: 1,300 mm, Strokes per minute: 8 - 24 spm, Cushion force (table): 2x 300 - 200 t, Cushion stroke (table): 250 mm, Cushion force (ram): 2x 5 - 55 t, Cushion stroke (ram): 150 mm, Coil feeding line, Max. coil weight: 25 t, Coil width: 300 - 1,800 mm, Sheet thickness: 0.5 - 3.0 mm, Consisting of decoiler and loading cart, Straightening machine, Oiling station, Transfer system, Switch and control cabinets, Platform system with staircase, Conveyor belt L 10,000 mm, Workbench system with undercabinets and vise, Quality control workstation. Hsdpfx Adjx Ry Dqjash +++ Note: Machine is part of an online auction! +++

Condition: ready for operation (used), Year of construction: 1996, filling capacity 400 Liter Usable Volume 300 Liter filling amount max. 850 kg workpiece sizes max. 850 x 200 mm Individual weight of workpiece max. 30 kg turning speeds 4.0 - 15.0 U/min Inner drum width 925 mm drive motor 380 V weight of the machine ca. 1950 kg. range L-W-H 3100 x 1600 x 2000 mm good / well-maintained condition (!!) - in checked conditions - machinevideo - ?v=xxnCddCmXe4 Description: - LIMA cleaning machines * for long concrete formwork parts, formwork clamps * for flame-cutting parts, plasma-cutting parts, laser-cutting parts * for punching and sawing parts - environmentally friendly, cost-saving, low-noise - drive with 5-fold V-belt via worm gear - maintenance-free spherical roller bearings - entire machine is highly soundproofed - dust extraction installed as standard - drum running time adjustable - speeds variably adjustable - the drum can be moved into any position using jog mode - space-saving thanks to compact design - extraction system built into the machine - single-lever drum quick release - machine bearings on vibration dampers - spacious unloading area, suitable for Euro standard containers - free access for forklifts or pallet trucks Working method: - the parts to be processed are moved by their own friction . deburred, descaled and derusted. - the closed design reduces the noise generated during deburring . to just 68 - 72 dB(A). - a direct-acting dust extraction system automatically removes . the dust generated during processing. - the machine can also process oily punched and sawn parts. - during this processing, additional sawdust is added to the drum. - a time delay switch switches the dust extraction system on individually. - the parts are thus deoiled and dried first. - only after this process does the dust extraction system switch on . automatically to suck the sawdust out of the drum. - by specifying the drum speed, optimal processing is guaranteed. - the LIMA-400 L deburring machine can be set up anywhere, . provided there is a solid surface/foundation. - after the work is complete, the drum remains in the position. Hodpfxoxaa Ulo Adaeh . so that the drum flap can be opened quickly. - one work cycle takes about 20 minutes.

Year of construction: 1991, condition: good (used), AS crane hooks, frame formwork, pipe slings, shaft ring slings -Load capacity: 1000 kg -Number: 3 claws present -Price: per piece -Weight: 13 kg Hsdpfxodi Smds Adajh

Condition: good (used), Formwork nails, formwork nails, strip nails, nail strips, compression head nails -Manufacturer: Paslode, strip nails paper bound 2 boxes / approx. 8000 pcs. -Type: 2.8 x 70 Smooth Bright .: 090082 Hedpfx Aev D Nu Hedaoh -Price/Delivery: complete -Transport dimensions: 300/260/H210 mm -Total weight: 29 kg

Condition: good (used), Pressure-tight clamping connection, formwork accessories, KRASO clamping connection -monolithic connection of the vulcanized KRASO locking disc -Easy installation -No assembly on site -simple closure of the clamping point -no complicated gluing of the sealing plugs -no labor-intensive rework -absolutely watertight clamping point -Tested to be watertight inside and out -from company liquidation Hedpfxsb Eu S Io Adash -Total length: 300 mm -1 wire mesh box approx. 350 pieces -Weight: including box 142 kg

Condition: good (used), Formwork nails, formwork nails, strip nails, nail strips, compression head nails, nail rolls -Manufacturer: Holz-Her, nail strips 1 box / approx. 6000 pcs. Hodpfx Adjv D Nugeash -Type: KRL 2075 2.8/3.1 x 80 H/A2 -Price/Delivery: complete -Transport dimensions: 410/350/H270 mm -Total weight: 16.6 kg

Condition: good (used), Formwork nails, formwork nails, strip nails, nail strips, compression head nails -Manufacturer: Paslode, strip nails paper bound 3 boxes -Type: 3.4 x 100 Smooth Bright .: 090082 -Price/Delivery: complete -Transport dimensions: 300/260/H340 mm -Total weight: 47.1 kg Hsdpfx Aov D Nu Tjdajh

Condition: good (used), Formwork nails, formwork nails, strip nails, nail strips, compression head nails, nail rolls -Manufacturer: Holz-Her, nail strips 1 box / approx. 6000 pcs. -Type: KRL 2075 2.8/3.1 x 65 H/A2 -Price/Delivery: complete -Transport dimensions: 410/350/H270 mm -Total weight: 16.6 kg Hodpfx Aov D Nutjdajh

Condition: good (used), Steel staircase, machine staircase, machine access, machine platform, work platform, transition Hsdewma Smepfx Adash -Machine stairs: 4-step transition -Step size: approx. 600 x 260 mm -Height: Platform 945 mm -Platform railings: both sides -Dimensions: 1830/810/H1950 mm -Weight: 53 kg

Condition: good (used), Formwork nails, formwork nails, strip nails, nail strips, compression head nails, anchor nails Hedpfsv Dw Rvjx Adajh -Manufacturer: Collated Fasteners, Strip Nails Anchor Nails 6 boxes/ total approx. 12000 pieces -Type: SNK2575 4.0 x 50 mm ring galvanized -Price/Delivery: complete -Transport dimensions: 650/380/H200 mm -Total weight: 59.7 kg

Condition: good (used), Formwork nails, formwork nails, strip nails, nail strips, compression head nails -Manufacturer: Holz-Her, nail strips 2 boxes / approx. 8000 pieces -Type: 2.8 x 65 H/BK Hedpfjv D Nvdex Adajh .: 25 6714 -Price/Delivery: complete -Transport dimensions: 370/260/H250 mm -Total weight: 27 kg

Condition: good (used), Steel staircase, external staircase, machine staircase, machine access, extension staircase, machine platform -Machine stairs: machine access -Step size: approx. 1050 x 260 mm -Height: upper step 610 mm -permissible load: kg -Transport dimensions: 1070/950/H205 mm Hodswubz Espfx Adaoh -Weight: 52 kg

Condition: good (used), Formwork nails, formwork nails, strip nails, nail strips, compression head nails -Manufacturer: Paslode, strip nails paper bound 2 boxes / approx. 8500 pcs. -Type: 2.8 x 63 Smooth Bright .: 092615 -Price/Delivery: complete Hjdpov D Nuyefx Adaoh -Transport dimensions: 300/260/H240 mm -Total weight: 30.9 kg

Condition: good (used), Formwork nails, formwork nails, strip nails, nail strips, compression head nails -Manufacturer: Collated Fasteners, strip nails 1 box/ 660 pieces Hodpfov D Nvqex Adajh -Type: SNK 2285 4.6 x 145 mm -Price/Delivery: complete -Transport dimensions: 270/160/H150 mm -Total weight: 12.1 kg

Condition: used, Universal clamping pad Hjdpfx Adjc Ibyzjajh -Execution: Toothed like a staircase. For use in pairs. Individual pads can be used in conjunction with clamps. -Support height: 72 to 240 mm. -Material: Heat-treated steel, painted. -Scope of delivery: 3 sets of different sizes -Weight: 6.2 kg

Condition: used, Frame formwork, pipe hangers, manhole ring hangers, manhole frame lifters, manhole ring lifters, channel ring lifters Hsdshp A I Sspfx Adaeh -Manufacturer: Zagro, hydraulic manhole frame jack type HK 6 -4 lifting cylinders -transport wheels -Dimension: 1400/1120/H1020 mm -Weight: 169 kg

Condition: used, Universal clamping pad set in a wooden box Hsdpfx Adsb A Rgpjaeh -Execution: Toothed like a staircase. For use in pairs. Individual pads can be used in conjunction with clamp No. 372000. -Support height 22 to 208 mm. -Material: Painted heat-treatable steel -Scope of delivery: No. 372200 4 pairs size. 1 4 pairs size 2 2 pairs size 3 including wooden box -Weight: 8 kg

Condition: new, empty load weight: 2,050 kg, maximum load weight: 650 kg, overall weight: 2,700 kg, loading space length: 5,600 mm, loading space width: 2,170 mm, loading space height: 2,100 mm, tire size: 195/55R10C, Large toilet trailer with aesthetic furnishings. A toilet trailer is often essential for a party, town festival, street party, company celebration or other outdoor event. We have set ourselves the task of helping here and have developed inexpensive car trailers with toilets. A visually appealing interior design is important to us for a toilet trailer in addition to good equipment. Hsdpfxeuh Rzqj Adaeh The car trailer is divided into two rooms for men and women. The lighting, heating and flow heater are operated via the power connection. Wall-mounted toilets with built-in cisterns and concealed pipes create a pleasant ambience. There is a fresh water supply and the gray water disposal runs via a sewer. The entrance to the portable toilet is a wide staircase that can be folded down and has lifting aids. The rest of the side wall is then folded upwards as weather protection. Swing-out handrails provide safety. Two entrance doors protect against wind and weather. The staircase is illuminated with an LED strip. The standard equipment in the ladies' area consists of three lockable cubicles with wall-hung toilet bowls, built-in cistern and toilet roll holder. The actual room has a heater, drain for internal cleaning, PVC on the floor, washbasin with vanity unit and instantaneous water heater, mirror, LED lighting, roof vent with mosquito net and blackout blind, light switch and socket. There is only one cabin in the men's area, which is equipped in the same way as the cabin on the ladies' side. The basic equipment is also the same. There are also four wall-mounted urinals with touchless sensors. The general equipment of the box trailer with toilet equipment is a 50mm insulated sandwich body in silver on the outside, white on the inside, insulated floor, supply flaps on the left for the technical equipment, power socket for 230V, distribution box with FI, fresh water access, outlet for drain pipe, four stable crank supports, very stable frame and V-drawbar hot-dip galvanized. Further technical details can be found below. We offer 100km/h shock absorbers, anti-theft devices and drawbar boxes as accessories for our toilet vehicles.

Condition: used, Year of construction: 2017, functionality: unexamined, Used HEGLA Glass Packlifter & Sheet lifter with frame – Sold as Seen Offered for sale is a used HEGLA glass transport and handling system, comprising steel support frames, vertical transport racks, safety guarding, and an integrated access platform with stairway. Manufactured by HEGLA Maschinenbau GmbH & Co. KG (Germany), this robust industrial system is designed for the safe unloading of packs, and handling of large glass sheets within a production environment. Key details  Manufacturer: HEGLA Maschinenbau GmbH & Co. KG Type: Transporteinrichtung (Transport System) Year of manufacture: 2017 Load capacity: 3,000 kg Max load height: 2,550 mm Approx. machine weight: 940 kg CE marked Construction & features: Heavy-duty steel frame construction Multiple vertical glass support racks with rubber contact pads Integrated safety fencing and guarding Access platform with industrial steel staircase and handrails Overhead beam structure suitable for handling integration Floor-mounted and free-standing sections Condition: Hedpjx Tpg Hofx Adaeh Used, with visible cosmetic wear including paint chips and surface marks consistent with normal industrial use Structurally complete and previously operational at time of decommissioning No testing carried out since removal Sale terms: Sold as seen No warranty given or implied Buyer responsible for inspection, loading, and transport Power, controls, and ancillary equipment only included where visible in photos

Condition: good (used), Year of construction: 2004, functionality: fully functional, DOUBLE ENTRY STORAGE PLATFORM without access staircase. Dimensions: 4.30 x 19.60 = 84 m². PRICE IS FOR PLATFORM IN NON-DISMANTLED CONDITION. Dismantling possible within one month. Sale corresponds to 70% of the current platform. Inspection before dismantling is mandatory. Hsdpfx Adsx Rdrljash

Condition: new, Year of construction: 2025, GANNOMAT "MASTER 325" FRAME DOWEL AND MORTISE BORING MACHINE Specifically designed for staircase construction Complete in standard configuration according to price list 01/19/D, featuring: - Precision collet chuck for ER40 collets Ø 3-26 mm, incl. collets Ø 10 / 13 / 16 / 20 - Pole-switchable motor 1400/2800 rpm, 1.5 kW - Line laser with bracket - Boring unit, continuously rotatable from the front (65°-0°-65°) - Position setting via digital counter - Position adjustment for 2 levels, pneumatic (0-100 mm) - Maximum boring depth 200 mm - Precision indexing rail with 12 mm pitch with central detent and lateral adjustment 320 mm - Complete stop system consisting of: 1 center stop and 1 stop for oversized frames 1 stop rod, approx. 850 mm long (can be reversed from left to right) 2 flip stops - Mortising unit lowerable, with 2 program cams (400V, 3Ph, 50Hz, 1.5 kW) Extraction funnel, dust-tested, Ø 80 mm Double miter stop adjustable from 0°-60° Pneumatic clamping of the X-axis with on/off switch at the indexing handle Pair of auxiliary workpiece supports, swiveling (left and right) Clamp column re-positionable to the front Hjdpfsxdttpjx Adaeh Chassis with 4 wheels for easy machine movement 1 piece Collet extension Ø 20 mm, incl. collet for drill shank Ø 9 mm 1 piece Baluster drill bit Ø 25 mm, chrome steel, with centering tip Available: at short notice

Condition: good (used), Year of construction: 1999, functionality: fully functional, input voltage: 400 V, Used machine MAKA FPM 470R 5-axis CNC machining center for machining wood, plastic and aluminum. Machine in mobile portal design, with rack and pinion drive. The machine was last used in wooden staircase construction. Year of manufacture: 1999 // RETROFIT in 2019 Technical data: CNC control BWO Vector 921 for 5-axis machining. 256 MB NC memory, USB connection, mobile control panel. Working areas in 5-axis operation, with tool diameter 60 / length 160 mm: Y-axis: 5,600 mm X-axis: 1,600 mm Z-axis: approx. 380 mm / with 180 mm fixture height (OK vacuum suction cup) Working areas in 3-axis operation, with tool diameter 60 / length 160 mm: Y-axis: 6,000 mm X-axis: 1,600 mm Z-axis: approx. 380 mm / with 180 mm fixture height (vacuum suction cup) A-axis 540° (rotation axis), B-axis 196° (swivel axis +/- 98°) Rapid traverse speed: X-/Y-axis 45 m/min., Z-axis 15 m/min., A-/B-axis 10,000 °/min. Milling unit: - 1 universal unit for 5-axis milling with 50° inclined head, power max. 12.5 kW, speed continuously adjustable up to 17,000 rpm, milling spindle water-cooled. - 1 NC height-adjustable chip collection system with slat curtain. Tool magazine: - ISO 40 tool interface for automatic tool change system. - 2 chain tool magazines with 32 spaces each for tools up to D = 90 mm, with sorted storage up to max. 160 mm. (Three spaces are required for this). Machine table: - 10 support tubes on linear guides with pneumatic release device for quick positioning. - 2 control circuits for "lifting/lowering" stops - 2 control circuits for "clamping/loosening" pneumatics Hedpsvmpx Rofx Adaoh - 2 vacuum control circuits with button for clamping and automatic reset through CNC programming. - 2 step separators, stroke approx. 320 mm. - Various clamping devices for posts and curved parts. - 1 chip conveyor belt integrated in the base frame, for removing chips and small waste up to max. approx. 100 x 100 x 100 mm. Tools: Tools are not included in delivery! Vacuum supply: - 1 vacuum pump, including tank with 250 liter capacity for quick vacuum build-up. - approx. 20 vacuum supports with various suction cups. - 4 lifting/lowering stops for positioning components. Other: - Automatic central lubrication. - Control cabinet with air conditioning unit. - Projection laser Work safety: - Traveling protective cabin with safety bumpers. Overhaul / repairs in 2018 / 2019: - Conversion of the rotary and swivel axis to a new generation of drives (digital). - New Y- / X- / Z-axis energy chains. - Complete new cabling, all power and measuring system cables renewed. - All guide carriages new - New Z-axis ball screw and guide rails. - New X-axis guide rail. - Control system converted to BWO Vector 921, with V-CNC card 256 MB NC memory. - New vacuum valves and vacuum hoses. - 2 x tool magazine + tool gripper overhauled. - Swivel suction overhauled. Software: - It is possible to take over a current version of the Compass staircase construction software. Compass is the leading provider when it comes to the planning and production of wooden staircases.

Condition: used, Working width 3450 mm Working height 2000 mm Number of cylinders 5 St. loading dimensions L x W x H 3600 x 1200 x 2720 mm Hedpfxowqr R Ao Adaoh Hess "Multipress" Perforated Plate Press For all sloped, segmental, and round-arch windows and doors. Also for interior work or frame construction. For gluing staircase block joints and much more. Largest working area approx. 3450 x 2000 mm External dimensions approx. 3600 x 1200 x 2720 mm The vertical perforated plate press is constructed of heavy-duty, torsion-free steel. Thanks to its simple, robust, and economical design, it has a long service life. The perforated plate is made of 10 mm sheet steel with a 50 mm hole pattern. The pressure cylinders and abutments are self-locking. 5 plug-in hand hydraulic cylinders on a perforated plate with a built-in pump, 2000 kp pressure relief valve, 140 mm pressure plate width, 80 mm pressure plate depth, 60 mm cylinder stroke 4 fixed individual abutments (Technical specifications according to the manufacturer - no guarantee!)

Condition: excellent (used), functionality: fully functional, SELECT 33300 Drilling machine for wooden stairs. To drill the banister holes in string boards and hand rails. The machine has a hydraulic feed regulation (no splintering of the holes) 400 VAC , 1,5 kW, 6 Bar. The drilling device can turn 60 Degree to the leftr and to the right. The drilling tool can be clamped by a collet. Hedpfovl E Tbex Adajh Line laser for positioning of the workpiece.