Steel staircase

Stahl Höhe 2140 mm Geländer beidseitig

Condition: like new (used), Year of construction: 2024, Cantilever rack double-sided used: Hot-dip galvanized screw system Scope of delivery: 4 double-sided shelf stands, height 4,160 mm with foot section 1,200 mm 24 cantilevers with 1,200 mm depth, standard Including longitudinal and diagonal braces for 1,300 mm axle spacing Incl. fastening material (without ground anchors) - (*Delivery time approx. 1 week) - (*No damaged parts!) - (*Reorder spare parts and extension possible at any time) - (*Also available in larger quantities: 20 stands in stock) Detailed description: - Stable steel construction made of IPE profiles - Surface of all components hot-dip galvanized - Load capacity per stand side 2,250 kg Nledpfxsh Ek Dae Afaja - Load capacity per cantilever arm 750 kg - Cantilever arms height adjustable in 100 mm increments - 6 screwable cantilever arms per stand and 2 base sections with a depth of 1,200 mm, standard = 4 storage levels one above the other per side of the stand - Including longitudinal and diagonal braces for 1,300 mm spacing - Shelf length 4,000 mm - Including fastening material (without ground anchors) - With assembly instructions and load plates C4 in accordance with DIN standard - Expert advice by telephone - Made in Germany - Short delivery time - Collection on site possible Our cantilever racks are produced exclusively in Germany. We offer reliable freight with registration before delivery. The material is sensibly packed to enable easy unloading. When installed outdoors, the load-bearing capacity is reduced by the wind and snow load. The subsurface must be made of concrete, level and dowel-capable and must be able to bear the loads. The condition of the soil and load-bearing capacity as well as any official permits required must be checked and guaranteed by the customer. The shelf supports must be anchored to the floor on site; anchoring to the wall is not necessary and not recommended. According to the trade association, it is recommended that the shelf supports on the top storage level have a projection of at least 500 mm above the top edge of the supports.

Condition: used, functionality: fully functional, Year of construction: 2019, operating hours: 2,444 h, load capacity: 1,000 kg, lifting height: 2,700 mm, fuel type: electric, mast type: duplex, construction height: 1,850 mm, fork length: 1,150 mm, drive type: Elektro, High-lift pallet truck Load centre: 600 Mast type: Duplex Condition: Ready for use and fully functional Technical condition: Good Front tyre type: Polyurethane Rear tyre type: Polyurethane Battery voltage: 24V Nljdpfx Afovtu A Uoaja Battery type: Lithium-ion Battery year of manufacture: 2019 Description: Integrated charger, foldable operator platform

Condition: new, Year of construction: 2024, Working width: 520 mm Planing shaft: Tersa Number of knives: 4 Planer table length: 2300 mm Dressing fence angle adjustable: yes Folding up the dressing tables: pneumatic Maximum passage thickness of thickness planer: 250 mm Thicknessing table height adjustment: electric with position control Planer thickness display: digital Feed speed: 5/8/12/18 m/min Infeed roller: steel Pull-out roller: Rubber Pressure bar: jointed Table rollers: no Motor power: 7.5 kW Motor brake: yes, automatic Suction connection: 160mm Machine length: 2300 mm Machine width: 1100 mm weight: 980 Nsdpfevadxlox Afajla

Condition: as good as new (ex-display), Year of construction: 2024, Cantilever rack in painted version (RAL 7016 anthracite): Scope of delivery: 4 shelf uprights height 4,200 mm with base section 1,200 mm usable depth 12 cantilever arms with 1,200 mm usable depth Longitudinal and diagonal braces for 1,300 mm upright center distance (4,000 mm shelf length) Fastening material (screws, nuts and washers) - (*Delivery or collection in approx. 1 - 2 weeks) - (*No damage to paintwork!) - (*No damaged components!) - (*Replacement parts can be reordered and extended at any time) - (*Offer available in larger quantities: approx. 50 stands in stock) Net price: € 1,990.00 plus VAT. Detailed description: - Sturdy steel construction made of IPE profiles (screw system) - Surface painted in RAL 7016 (anthracite) - Shelf height 4,200 mm - Load capacity per upright 2,200 kg - Foot section and cantilever arms with 1,200 mm usable depth - Cantilever arms height-adjustable in 100 mm increments - 3 screw-on cantilever arms per upright, standard (= 4 storage levels) - Load capacity per cantilever arm 740 kg - Including longitudinal and diagonal bracing for 1,300 mm spacing - Shelf length = 4,000 mm - Including fixing material (without floor anchors) - With assembly instructions and load plates C4 according to DIN standard - Expert advice by telephone - Made in Germany - Short delivery time - On-site collection possible Our cantilever racks are produced exclusively in Germany. We offer reliable freight with notification prior to delivery. The material is sensibly packed to enable easy unloading. Delivery can be made in approx. 1 - 2 weeks after receipt of order. For outdoor installation, the load-bearing capacity is reduced by the wind and snow load. The surface must be concrete, level and suitable for dowels and must be able to bear the loads. The customer must check and ensure that the ground conditions and load-bearing capacity as well as any necessary official approvals are in place. The shelf stands must be anchored to the floor on site; anchoring to the wall is not necessary and not recommended. According to the employers' liability insurance association, it is recommended that the uprights on the uppermost storage level protrude at least 500 mm from the top edge of the uprights. Nlsdpfxemhhype Afaea

Condition: like new (used), Year of construction: 2024, Cantilever rack double-sided used: Hot-dip galvanized screw system Scope of delivery: 4 double-sided shelf uprights, height 3,500 mm with foot parts each 1,200 mm 24 cantilevers with 1,200 mm depth, standard Including longitudinal and diagonal braces for 1,300 mm axle spacing Incl. fastening material (without ground anchors) - (*Delivery time approx. 1 week) - (*No damaged parts!) - (*Reorder spare parts and extension possible at any time) - (*Also available in larger quantities: 20 uprights in stock) Detailed description: - Stable steel construction made of IPE profiles - Surface of all components hot-dip galvanized - Load capacity per upright side 2,250 kg - Load capacity per cantilever arm 750 kg - Cantilever arms height adjustable in 100 mm increments - 6 screwable cantilevers per upright and 2 foot parts with a depth of 1,200 mm, standard = 4 storage levels one above the other per stand side - Including longitudinal and diagonal braces for 1,300 mm spacing - Shelf length 4,000 mm - Including fastening material (without ground anchors) - With assembly instructions and load plates C4 in accordance with DIN standard - Expert advice by telephone - Made in Germany - Short delivery time - Collection on site possible Nljdomkixwopfx Afasa Our cantilever racks are produced exclusively in Germany. We offer reliable freight with registration before delivery. The material is sensibly packed to enable easy unloading. When installed outdoors, the load-bearing capacity is reduced by the wind and snow load. The subsurface must be made of concrete, level and dowel-capable and must be able to bear the loads. The condition of the soil and load-bearing capacity as well as any official permits required must be checked and guaranteed by the customer. The shelf supports must be anchored to the floor on site; anchoring to the wall is not necessary and not recommended. According to the trade association, it is recommended that the shelf supports on the top storage level have a projection of at least 500 mm above the top edge of the supports.

Condition: used, mileage: 250 km, power: 235 kW (319.51 HP), first registration: 09/2025, fuel type: diesel, overall weight: 18,000 kg, axle configuration: 2 axles, color: white, gearing type: automatic, loading space length: 4,000 mm, loading space width: 2,450 mm, loading space height: 600 mm, Equipment: ABS, air conditioning, all wheel drive, crane, soot filter, MAN TGM 18.320 BB Meiller TRIGENIUS 3S Tipper with Palfinger PK 12.501 Unused exhibition vehicle with day registration * All-wheel drive 4X4, selectable * Leaf/leaf suspension * Meiller 3-way tipper TRIGENIUS 4000 mm x 2420 mm * Sidewalls: 600 mm, front wall: 800 mm M Jet * 7 pairs of retractable lashing rings * Drop-side relief on right and left * Swing tailgate * Rotating beacons * Dual-circuit trailer hydraulics * 40 mm trailer hitch * MAN media system * Automatic gearbox Nlodjxnu Szjpfx Afaea * Engine brake * Sun visor * Air conditioning (Climatronic) * On-board computer * Turn assist system * Emergency brake assist * Reversing camera * Multifunction steering wheel * Virtual cockpit * Refrigerator * Lifting roof * Electrically heated exterior mirrors * Electric window lifters * Palfinger loader crane PK 12.501 SLD 5 * Central locking with remote control Interim sale and errors expressly reserved! Sale exclusively according to our terms and conditions. Important Notice: Despite careful verification of all details in our offer, errors may occur. Some may result from transmission errors in the systems of various platform providers. Therefore, please note that all information is provided without guarantee and does not constitute a legal claim. Legal Notice: This sales advertisement does not constitute an offer within the meaning of §145 BGB. Rather, it is provided for information purposes for the initiation of a contract. All information provided is without guarantee and thus does not constitute warranted characteristics.

Condition: ready for operation (used), functionality: fully functional, machine/vehicle number: UB421, mileage: 154,542 km, power: 95 kW (129.16 HP), first registration: 01/2009, fuel type: diesel, empty load weight: 4,010 kg, maximum load weight: 1,990 kg, overall weight: 6,000 kg, axle configuration: 4x2, next inspection (TÜV): 01/2027, fuel: diesel, color: orange, gearing type: automatic, emission class: euro4, number of seats: 6, loading space length: 2,950 mm, loading space width: 2,200 mm, loading space height: 1,450 mm, Equipment: ABS, airbag, differential lock, sliding door, soot filter, tilting carriage, MB Vario 613 D tipper Double cab with 6. seats 1st hand vehicle Former municipal / authority vehicle Low emission Euro 4 (BlueTec4) Green environmental badge Automatic gearbox Twin tires on rear axle Differential lock rear axle Nodpfxjrpmwkj Afajla Former city vehicle yellow rotating beacons Isri comfort driver's seat power steering Driver airbag electric exterior mirrors Radio with CD Swedish hatch Loading area dimensions in mm L: 2150/2950 W: 2200 H:1450 The loading area is divided into two compartments 1x 2150L 1x 800L but can be made into one loading area then 2950L Payload 1990 kg Unladen weight 4010 kg Gross vehicle weight 6000 kg Wheelbase 3700 mm Ready for immediate use Errors excepted, subject to change and prior sale We sell exclusively for our own account and under exclusion of any warranty. Subject to errors, changes and prior sale We are there for you Monday \- Friday from 9\.00 \- 17\.00, Saturday by appointment\. Outside these opening hours, appointments can be made by telephone\. We will gladly accept your current used appliance/vehicle in payment\. Sales to traders and exporters are given priority, this applies to our entire vehicle stock\. The above information is non-binding, subject to errors/changes and prior sale!

Condition: like new (used), Year of construction: 2025, Cantilever rack used: screw system in hot-dip galvanized design Scope of delivery: 4 shelf uprights, height 3,500 mm with foot section, 1,200 mm usable depth 12 cantilevers with 1,200 mm usable depth, standard Nedjmhh Dhjpfx Afaola Including longitudinal and diagonal braces for 1,300 mm spacing Fastening material (screws, nuts and washers) - (*Delivery time approx. 1 week) - (*No damaged parts!) - (*Reorder spare parts and extension possible at any time) - (*Offer available in larger quantities: approx. 40 uprights in stock) Detailed description: - Stable steel construction made of IPE profiles (screw system) - Hot-dip galvanized surface - Shelf height 3,500 mm - Load capacity per upright 2,250 kg - Foot section and cantilever arms with 1,200 mm usable depth Cantilever arms in Height adjustable in 100 mm increments - 3 screwable cantilever arms per stand, standard (= 4 storage levels) - Load capacity per cantilever arm 750 kg - Including longitudinal and diagonal braces for 1,300 mm spacing - Shelf length = 4,000 mm - Including fastening material (without ground anchors) - With assembly instructions and C4 load plates in accordance with DIN standard - Expert advice by telephone - Made in Germany - Short delivery time - On-site collection possible Our cantilever racks are manufactured exclusively in Germany. We offer reliable freight with registration before delivery. The material is sensibly packed to enable easy unloading. When installed outdoors, the load-bearing capacity is reduced by the wind and snow load. The subsurface must be made of concrete, level and dowel-capable and must be able to bear the loads. The condition of the soil and load-bearing capacity as well as any official permits required must be checked and guaranteed by the customer. The shelf supports must be anchored to the floor on site; anchoring to the wall is not necessary and not recommended. According to the trade association, it is recommended that the shelf supports on the top storage level have a projection of at least 500 mm above the top edge of the supports.

Condition: used, mileage: 206,885 km, power: 110 kW (149.56 HP), first registration: 12/2004, fuel type: diesel, empty load weight: 5,655 kg, maximum load weight: 1,835 kg, overall weight: 7,490 kg, tire size: 235/75R17.5, axle configuration: 4x2, wheelbase: 3,320 mm, color: orange, driver cabin: day cab, gearing type: mechanical, emission class: euro3, suspension: steel, number of seats: 3, loading space length: 3,800 mm, loading space width: 2,300 mm, loading space height: 400 mm, Equipment: ABS, cabin, crane, cruise control, differential lock, fog lights, immobilizer system, low noise, onboard computer, parking heater, power assisted steering, trailer coupling, Vehicle location: Bovenden, steel superstructure, Kz. house, double seat bench, rear window, electric mirror, radio, switch 6, ABS (anti-lock braking system), frame cladding, differential lock, rotating beacon, leaf suspension, AHK air+light, noise reduction G1, lashing eyes, U-protection, pendulum flaps, roof hatch, crane behind house, emergency stop, foldable, 2-point hydraulic support, 1xhydr. extension. Wheelbase: 3320 mm Body: Meiller 3-sided tipper with Hiab 055 B-1 CL crane with hydraulic extension and grab control. Differential lock HA, axle ratio i = 4.300 (HL2/4/6), front axle 3.5t, rear axle H2 6.2 / 7.2t crown wheel 325, disc brakes VA and HA, stabilizer HA under frame, transmission G 56-6/6.29-0.78, engine R4 LA, Meiller pump 6-piston type 265, NA MB 56-1c countershaft i = 0.56, PTO single. Crane: 2.5m 1780kg, 3.8m 1220kg, 5.3m 860kg. Clamshell bucket available at extra charge! ACCESSORY INFORMATION WITHOUT WARRANTY, subject to alterations, prior sale and errors excepted! Nlsdpfx Ajvhll Asfaja - .

Condition: used, fuel type: diesel, first registration: 06/2014, Year of construction: 2014, operating hours: 2,900 h, Excavator Hitachi ZX33U-5A CLR – 2,900 operating hours – air conditioning – CW 5 – quick coupler system and auxiliary lines – total weight 3,320 kg – = Further Information = Nsdpsw A Thmefx Afasla Model year: 2014 Drive: Track Unladen weight: 3,320 kg Please contact Miguel Cubas for more information. = Company Information = We are located between Antwerp and Brussels along the A12 motorway, near the port of Antwerp. Opening hours: Monday to Friday continuously from 8:30 am to 7:00 pm.