Used Stahl Pharmaceutical for sale (488)

Condition: good (used), functionality: fully functional, Year of construction: 2000, operating hours: 5,555 h, We are selling an overhead crane. The crane length is 19.5 m. Load capacity 5000 kg. In very good condition. Tedpew Apb Njfx Af Tof

Condition: good (used), Winch rope, crane rope, hoist rope, wire rope, clothesline, PVC wire rope -Wire rope: Steel rope PVC coated -Type: 6x7 FC PVC transp. Todpfxepy Ryqe Af Tof -Rope nominal diameter 4.0 / 5.0 mm -Length: 102 m -Quantity: 2 pieces available -Price: per piece -Weight: 6.6 kg/piece

Condition: good (used), machine/vehicle number: 231127, infeed width: 780 mm, Equipment: compressor, Pallet feeder with Tremat 4 folding pockets Todpjw N Ntkefx Af Tjf 3 knives 1 side pocket after cross fold Compressor Press delivery SBP 46.D No. 23152

Year of construction: 1989, condition: used, Standard equipment Todpfx Afebkacgs Tsf

Condition: used, functionality: fully functional, Year of construction: 1985, machine/vehicle number: KA1 - 16116/16117, Steel crane ceiling, crane runway, bridge crane, hall crane, crane Load capacity / lifting capacity: 5t - 5000kg Track gauge: 9550mm, overall width approx. 9700mm Year of manufacture: 1985 with pendant control Tedpfx Aew Hnpgsf Tsf Lifting height: 6m Hoist: ASL3412-20 Construction height (top edge of crane to hook): approx. 900mm Head beam length with buffer: approx. 240cm Attention! The runway rails on this crane are offset in height by approx. 20cm from right to left. This means that one rail would be installed higher than the other! Optionally, 2 x 40m HEA240 runway rails are also available. Crane is dismantled and immediately available Used condition, inspection logbook is available Also available: column-mounted slewing cranes and wall-mounted slewing cranes Demag KBK and Abus HB systems, as well as Errikla, Hadef, Stahl KT 2000, etc. Shipping by carrier possible, please inquire with postal code Collection preferred

Condition: good (used), Winch rope, crane rope, hoist rope, wire rope Todpeghnd Iefx Af Tjf -Wire rope: Ø 6 mm -Length: approx. 38 m -for: electric wire rope hoist -Also other crane ropes available -Price: per roll -Number: 1x available -Weight: 7 kg

Year of construction: 1980, condition: ready for operation (used), Built in 1980 Size max 400 mm min 120 mm Bar length 900 mm Tjdpfjd Iq Thsx Af Tof Infeed height max 890 mm min 360 mm Equipment • upright stack delivery with pressing SBP 40

Condition: used, functionality: fully functional, Year of construction: 1985, machine/vehicle number: KA1 - 16114/16115, Steel overhead travelling crane, crane runway, bridge crane, indoor crane, crane Crane is available 2x in identical configuration!!! Load capacity / lifting capacity: 3.2t - 3200kg Track gauge: 9550 mm, external dimension approx. 9700 mm Year of manufacture 1985 with pendant control Lifting height 6 m Hoisting unit ASL308-16 Overall height from top of crane to hook approx. 900 mm End carriage length with buffers approx. 240 cm Optionally available: crane rails 2x 40 m HEA240. Crane is dismantled and immediately available Used condition, inspection book is available Column-mounted jib cranes and wall-mounted jib cranes are also in stock Demag KBK and Abus HB systems as well as Errikla, Hadef, Stahl KT 2000 etc. Shipping by freight carrier possible, please inquire with postcode Todpfxow Hnmrs Af Tof Collection preferred

Condition: excellent (used), Gratings, grating, light grids, insert grids, insert grids, stair treads, safety steps, grating step, step, safety step, perforated sheet step -Grating step: safety step perforated sheet step hot-dip galvanized Tedpfx Aowztnkjf Tsf -Type: ID 600x200x45 mm -Number: 6x grates available -Price: per piece -Weight: 3.3 kg/piece

Year of construction: 1989, condition: used, Size max 360 x 650 mm min 80 x 100 mm Speed max 150 m/min Equipment • flat pile feeder 1st folding unit: Tedec Rhvtspfx Af Tjf • 4 buckle plates • Festa foldingrolleradjustment • noise prevention

Condition: good (used), Hacker feed roller, conveyor belt rollers, transport rollers, replacement rollers, conveyor belt, roller conveyor, support rollers Tsdedl E Iijpfx Af Tof -Feed roller: serrated -Roll diameter: 270 mm -Transport roller width: 626 mm -Total length: 626 mm -Shaft mount: 80 mm -Quantity: 1x piece available -Weight: 137 kg

Condition: ready for operation (used), Size with pallet feeder max 660 x 1040 mm Speed max 210 m/min Equipment • pallet feeder with Tremat suction head 1st folding unit: • 4 buckle plates • noise prevention peripheral units and deliveries Tsdpfjd Iq S Rjx Af Tjf • marking device MKE 66 • upright stack delivery with pressing SBP 66

Condition: good (used), Conveyor belt rollers, transport rollers, replacement rollers, conveyor belt, roller conveyor, support rollers Tjdpfscvpudox Af Tjf -Roll diameter: 218 mm -Transport roller width: 790 mm -Holder with needle bearing plate: 140 x 140 x 19 mm -Flange mounting inside: Ø 110 mm, bolt circle Ø 140 mm -Number: 4x rolls available -Price: per piece -Weight: 40 kg/piece

Condition: ready for operation (used), coupling module Tsdpfx Afsd Hvzns Tjf

Condition: good (used), Conveyor belt rollers, transport rollers, replacement rollers, conveyor belt, roller conveyor, support rollers -Roll diameter: 115 mm -Transport roller width: 380 mm -Total length: 420 mm -Shaft mount: 40 mm Tedpfx Afec Uz Hme Tjf -Two-edge: 25 mm -Number: 4x rolls available -Price: per piece -Weight: 12 kg/piece

Year of construction: 1991, condition: ready for operation (used), Built in 1991 Size max 660 x 300 mm Tjdsd Iq Tljpfx Af Tjf min 120 x 100 mm Infeed height max 960 mm min 360 mm Pile length max 800 mm Speed max 75 m/min Equipment peripheral units and deliveries • upright stack delivery with pressing SBP 66

Condition: good (used), Clamping table, clamping angle, milling machine table Todpfx Aelcfi Hef Tof -Clamping angle: for workpiece clamping -Height: approx. 500mm -Number: 1x clamping angle available -Price per piece -Dimensions: 220/100/H500 mm -Weight: 12,8 kg/pc.

Condition: good (used), Refurbished: 2019 Format: max 300 x 110 mm; min 30 x 20 mm Todpfoqrq Nijx Af Tof Number of panels: max 3 panels Infeed height: 550 - 950 mm Output: max 30 - 90 m/min

Year of construction: 1997, condition: used, Built in 1997 Size with flatpile feeder max 520 x 840 mm min 100 x 150 mm Speed max 180 m/min Equipment: • flat pile feeder • counter 1st folding unit: • 4 buckle plates 2nd folding unit: Tjdpfx Afsdm U Dhe Tjf • 4 buckle plates peripheral units and deliveries: • belt delivery

Condition: ready for operation (used), Working widths 660 mm Equipment 2nd folding unit: Tjdpfsd Hgvzsx Af Tef • 6 buckle plates • noise prevention

Condition: ready for operation (used), Size with flatpile feeder max 660 x 1040 mm Speed max 210 m/min Equipment feeder • flat pile feeder • Tremat 1st folding unit • 4 buckle plates • noise prevention 2nd folding unit Tsdpfxod Iq S Uo Af Tjf • 4 buckle plates • noise prevention delivery • delivery SBP 46

Year of construction: 1987, condition: ready for operation (used), Built in 1987 Size max 860 mm min 120 x 100 mm Working height 300 mm Infeed height max 960 mm min 360 mm Speed max 75 m/min Equipment • upright stack delivery with pressing SBP 86 Tjdsd Iq Tnjpfx Af Tsf

Year of construction: 1997, condition: good (used), Built in 1997 Size: max 380x270 mm Speed: max 1500-3360 c/h Book block thickness: max 70 mm Size: min 100x100 mm Book block thickness: min 5 mm Size: max 270 x 380 mm min 100 x 100 mm Product thickness: max 70 mm min 5 mm Speed: max 3.300 c/h Equipment • CAC/COS-automatic setup • main engine frequenzcontroled • automatic central lubrication system • machine frame for 5 stations • infeed with IR warm up • automatic thickness control rounding and backing station 5 stations book block preparation • marking ribbon stick device 1. station • gluing unit 2. station • gauzing unit 3. station • gluing unit 4. station head and tailbanding unit 5. station • pressing unit casing-in machine • cover belt • cover magazin • cover rounding station book pressing and forming machine • book pressing and forming machine EP 508 • delivery to the right Tjdpegap Dwsfx Af Tof standard equipment • 1 set of operator manuals • 1 spare part catalogue • 1 set of electrical diagrams • 1 set of standard tools • standard equipment

Year of construction: 1992, condition: used, Size max 320 x 250 mm min 160 x 120 mm Pile height 50 mm Infeed height max 850 mm Tsdpfx Afoc Rmtzo Tef min 350 mm Speed max 50-100 m/min

Year of construction: 1997, condition: good (used), Built in: 1997 Tsdpfx Ajdym Stof Tsf Size: 311 x 355 mm Speed: 9.000 c/h Equipment: gathering chain & feeder: • 8 stations chain • with double feeder • 1 folder feeder stitching unit & trimmer: • stitching unit • 2 stitching heads • trimmer • belt delivery with counter