Chain hoist used for sale
Your location was not identified (Edit)
ID000517Chip and saw dust conveyorManufacturer: GVC,Length: 4200 mm,Width: 400 mm,Inside width: 250 mm,Height: 460 mm, Electric motor: 2,2 kW,Year of production: you need more information about the equipment, please contact our l for best price
Bjbsdtc82c more
ID000374Second hand Roller table with pushers- length 6,50 m,- roll length 450 mm,- with hydroelectric power station- overall width 1, 60 m,- electric motor 1, 5 ler conveyor with chain pushers can be used after saw or other machine to change direction for board, beam ase call us if You have more questions about used conveyor.
Nvkkz more
2014
used
Chain hoist, sprocket chain hoist, hand chain hoist, hoist hoist, chain hoist, crane, assembly hoist, assembly chain hoist, manual undercarriage, trolley, trolley, trolley, crane drive, crane trolley, trolley
Bdb2bcoenf
-Bearing capacity 5000 kg
-Max stroke 9,000 mm
-3x chain hoists available
-Prize per piece
-Dimensions 760/230 / H170 mm
-Weight 78 kg / piece more
1999
used
Electric chain hoist, electric hoist, crane LIFTKET type B 3
No. 96069 Year of manufacture 1999
Load capacity: 250 kg
Hook path: 2.6 meters
Lifting speed: 8 m/min.
Fine lifting speed: 2 m/min.
1 load line = 250 kg
Engine power: 0.6 / 0.1 kW
Bajokd
Engine speed: 2825 / 710 rpm
Power supply 400 Volt, 50 Hz
- Suspension eye at the top of the crane
sound condition more
weight max.:2 t
stroke:6400 mm
Hpmtyo2
weight of the machine ca.:0,05 t
dimensions of the machine ca.:0,4 x 0,3 x 0,3 m
star-wheel hoist as per TGL-Norm 20-360020, with high-performance load chain more
Payload 250 kg.
Weight ca. 20 kg
total power requirement 0,30 kW
stroke speed 12 / 6,0 m/min
Payload 125/250 kg
Bjwedhthw7
motor 2.840 U/min. more
weight max. 2 t
Nlpn7
stroke 3000 mm
total power requirement kW
weight of the machine ca. 0,025 t
dimensions of the machine ca. 0,3 x 0,4 x 0,2 m more
1991
used
bearing load 1,500 kg
speed of stroke 1 / 4m/min
with electric chassis
running speed 4 / 16m/min
chains 7/8 x 23 mm
complete electric and traction motors for crane bridge
existing
Meeb7 more
2014
used
Electric chain hoist, crane, hall crane, assembly crane, electric lift
-Demag DC-PRO 10-1000 1/1 H5 V6 / 1.5
-Bearing capacity 1000 Kg
-Main lift 6 m / min
-fine lift 1.5 m / min
Bfqbanvtyn
-Chain length 5 m
-Dimensions 600/350 / H530 mm
-Eigen weight 64 kg more
1999
used
Electric chain hoist, electric hoist, crane DEMAG type DKUN 1-125 KV1F4
No. 63052763 Year of manufacture 1999
Load capacity: 125kg
Hook path: 3.7 meters
Main lifting speed: 8 m/min.
Fine lifting speed: 2 m/min.
chain size 3,6 x 10,6 mm
1 load line = 125 kg
Power supply: 400 Volt, 50 Hz
Nn98f
sound condition more
STAHL - chain hoist 1.600 kg
STD3016-8/2 4/2
400 V
2,000 kg
50 Hz
2.30/0.57 kW
Qi8clqp9
used / used
Please note the photos
Please look at the pictures. Important!!!
Net weight / net weight: 180 kg
X618 more
2003
used
bearing load 1,000 kg
hook way approx. 2,500 mm
parts of chain 2
speed of idle stroke 4 / 1 m / min
with bearing roller chassis
electrical data 380 V / 0.75 / 0.18 KW
Meebt
complete weight approx. 50 kg
*- condition as good as new - * more
used
Electric chain hoist, crane, hall crane, assembly crane, electric lift
Bftzcrmf2j
-Demag chain hoist 1.6 t
-Chain length 4 m
-Main lift 4.5 m / min
-Finhub 1.1 m / min
-2x cranes available
-Prize piece
-Dimensions 880/860 / H410 mm
-Eigen weight 146 kg more
used
Electric chain hoist, electric hoist, crane DEMAG type PK2N
Make no. 1596095
Load capacity: 250 kg
Hook path: 2.75 meters
Bwvd9wh
Lifting speed: 10 m/min.
1 load line = 250 kg
Engine power: 0,5 kW
Power supply: 380 Volt, 50 Hz
- without chain box more
ID000361Used chain conveyors with end stop,- electric motor 1, 1 kW,- 700 rpm,- overall length 6000 mm,- 1150 mm wide,- 1550 mm you need more information about the equipment, please contact our manager.
Izj7ot07 more
weight max. 4,5 t
Byvs33kf
stroke 1,35 mm
total power requirement manuell kW
weight of the machine ca. 35 ca. kg. more
LIFTKET Hoffmann - Chain hoist
ZFL15/G80F/4KD80e4X-8/2
380-415 V
2,000 kg
60 Hz
0.12 - 0.55 kW
used / used
Please note the photos
Bmfiif3lhn
Please look at the pictures. Important!!!
Net weight / net weight: 190 kg
X617 more
2009
used
maximum capacity load 5,000 kg
*lifting height 15 metres*
number of strands 2
Dgjwiah
load chain 10 x 30
decoiling of hand chain per metre of lifting - 174 m
lifting force at nominal load 34daN
weight approx. 115 kg
2 units on stock - price per unit
more
used
Chain hoist, sprocket chain hoist, hand chain hoist, hoist hoist, chain hoist, crane, assembly hoist, assembly chain hoist, manual undercarriage, trolley, trolley, trolley, crane drive, crane trolley, trolley
-Bearing capacity 1000 kg
Nptqp
-Max stroke 4300 mm
-Price per piece
-Number 2 pcs
-Dimensions 300/200 / H560 mm
-Weight 36 kg/pc. more
2004
used
Electric chain hoist, electric hoist, crane DEMAG type DC 2-250 H5 V1
No. 93400395 Year of construction 2004
Load capacity: 250 kg
Hook path: 2.8 meters
Lifting speed: 8 m/min.
Fine lifting speed: 2 m/min.
Bw8vfki
motor power: 0,37 / 0,1 kW
Power supply: 400 Volt, 50 Hz
1 load line = 250 kg
- without chain box more
weight max.:5 t
stroke:6000 mm
weight of the machine ca.:0,08 t
dimensions of the machine ca.:0,5 x 0,5 x 0,3 m
Lsq78cgj
star-wheel hoist with high-performance load chain more
Standard version (3m hook path), chain hoist in very good condition. Was used in clean production hall.
Go3xlesh more
2011
used
maximum capacity load 6,300 kg
Ndetf
lifting height 1.5 metres
number of strands 2
load chain 9.0 x 27.2 mm
lifting height for one lever turning 8 mm
lever pressure at full load 39daN
*PT all-purpose devices are suitable for load securing
according to EN 12195*
not suitable for passenger transport
weight approx. 31 kg more
used
Electric chain hoist, crane, overhead crane, assembly crane, manual undercarriage, trolley, trolley, trolley, crane drive, crane trolley, trolley
-Electric chain hoist with landing gear
-Bearing capacity 250 Kg
Kgsizmrz
-Main lift 8 m / min
-Fine lift 2.4 m / min
-hook path 3,4 m
-Dimensions 385/500 / H800 mm
-Weight about 40 kg more
1995
used
Electric chain hoist, electric hoist, crane ABUS type GM 3 / 500.6-111
No. D774060 0020 Year of manufacture 1995
Load capacity: 500 kg
Hook path: 3,1 meter
Lifting speed: 6 m/min.
Fine lifting speed: 1.5 m/min.
1 load line = 500 kg
Power supply 400 Volt, 50 Hz
- Suspension eye at the top of the crane
Bfsyym3dw2
- without trolley
Weight: 30 kg
sound condition more
DEMAG
DC-PRO 10-800 1/1 H5 V6/1
3~ / 380-415 V / 50 Hz
Hook path: 5,0 m
Bkvrmfjric
Load capacity / Load capacity: 0,8 to
Year of manufacture 2008
IP 55
used / used
Please note the photos
Please look at the pictures. Important!!!
Dimensions / Measurement: 120 x 80 x 80 cm
Gross weight / Gross weight: 150 kg
Int. no.: X359 more
Electric chain hoist with travel antrismotor fabr.DEMAG
Type:DKUN 10-1000 KV1 F4 Year 1997
Bifmthzr8d
Load capacity.2000Kg
Chain path 5m
in good condition little used . more
2015
good condition (used)
Portal crane manufactured by Keller&Kalmbach 2000Kg lifting capacity
Initial acceptance was in December 2015, not much has happened and
is therefore in a top condition.
Chain hoist: DEMAG DC-Pro 10-2000 2/1 H5 V6/1,5
Span width: approx. 14.8 metres
Hook height: approx. 4.8 metres
construction height: approx. 5,9 meters
construction width: approx. 15,05 meters
Travel in longitudinal direction on the rails : approx. 42 meters
There are also about 42 meters of busbars for the power supply
The annua... more
2014
used
load capacity 250 kg
lifting speed at nominal load 31 m / min
lifting speed without load 52 m / min
lowering speed at nominal load 36 m / min
air consumption at nominal load 1.98 m³ / min
lifting height 3 m
operating pressure 5 - 7 bar
construction height 457 mm
extremely sensitive control for precise positioning of the
load
EMERGENCY STOP function
limit switches for highest and lowest weight
high load capacity - for industrial use
weight approx. 22 kg
explosion protected
*- new - ... more
2007
used
Electric chain hoist, crane, hall crane, assembly crane, electric lift
-Demag chain hoist 2.0 t
-Chain length 5 m
-Main lift 4.5 m / min
Bfsxjarff3
-Finhub 1.1 m / min
-Dimensions 620/330 / H830 mm
-Eigen weight 66 kg more
1978
used
Electric chain hoist, electric hoist, crane DEMAG type PK 10N-F
No. 1795141 Year of manufacture 1978
Load capacity: 1000 kg
Hook path 3 meters
Main lifting speed 8 m/min.
Fine lifting speed 2 m/min.
Cable length control bottle approx. 2 metres
Mains connection 400 Volt, 50 Hz.
Nluyh
- 1 load line = 1000 kg
- Electric trolley DEMAG with 2 travel speeds approx. 4 and 28 m/min. type 13/6PF 8/2 / EU-RU 10 PK
- for I-beams with a width of approx. 100 to 150 mm
sound condition more
DEMAG
DKUN 10-800 K V1
460 V / 60 Hz / 2.6 kW
Hook path: 7.0 m
Bkvris2nxw
Chain / Chain: 7.4X21.2 8DK
Load capacity / load capacity: 1,6 to
Year of construction / Year of Manufacture: 2005
used / used
Please note the photos
Please look at the pictures. Important!!!
Dimensions / Measurement: 70 x 80 x 60 cm
Gross weight / Gross weight: 100 kg
Int.No.: X358 more
Chain hoist with runway approx. 17 m
Fixing the raceway with clamps to T-beams
lifting capacity 500 Kg
Bkamvzpbzo
( disassembled ) more
Chain hoist DEMAG DKM 2 - 250 K
second-hand, very good condition, see pictures
Load capacity 250 kg
hook path 2,8 m
Year of manufacture 2004
negotiation price: € 300,-- net ex stock
Stock is on hand.
Transportation possible on request.
Visits are possible at any time by appointment.
Further information on request.
Constantly over 5000 running meters of pallet racking
from numerous manufacturers in stock.
(Changes and errors in the technical data, information
and prices as well as prior sale res... more
Technical data:
Vfvzpiw7
- Load capacity 500 kg
- Throat approx. 5300 mm
- Hook path approx. 3000 mm
- Swivel radius approx. 180 °
- Crane jib IPE 240
- Bearing distance approx. 1250 mm
- Total height with brackets approx. 1400 mm
- Total length approx. approx. 5500 mm
- Lifting gear:
Make: ABUS Type: GM 3 500.6 - 111 F4
- Lifting speed approx. approx. 1.5 / 6.0 m/min
- man. Crab crawler
- man. Swivelling the boom
- Operation via pendant control
- Drive 400 V
- Total weight approx. 900... more
1987
used
Electric chain hoist, crane, hall crane, assembly crane, electric lift
-Chain train with suspension
-Bearing capacity 1000 Kg
-Main lift 5 m / min
Bd0hvv22ms
-hook path 2.5 m
-Dimensions 335/410 / H798 mm
-Eigen weight 66.5 kg more
used
Electric chain hoist, electric hoist, crane DEMAG type PK1
Make no. 2311827
Load capacity: 250 kg
Hook path: 2.5 meters
Lifting speed: 8 m/min.
2 load lines = 250 kg
Bfsyydk8c0
Engine power: 0,2 kW
Power supply: 380 Volt, 50 Hz
- Control panel
Weight: 18 kg
sound condition more
DEMAG
DC-COM 10-1000 1/1 H4 V4/1
3~ / 380-415 V / 50 Hz
Hook path: 4.0 m
Chain / Chain: 7.4X21.2 TDK
Load capacity: 1.0 to
Year of construction / Year of Manufacture: from 2009 to 2015
IP 55
used / used
Please note the photos
Please look at the pictures. Important!!!
Pumkpq
Dimensions / Measurement: 70 x 80 x 60 cm
Gross weight / Gross weight: 91 kg
Int. no.: X357 more
2018
ready for operation (used)
Electric chain hoist
Producer: ChainMaster
Model: D8 + 500 32M
Load capacity: 500 kg
Speed: 4 m / min
Load chain: 7/22 mm
Number of brakes: 2
Chain weight: 27 kg
Production year: 2018
Jvpxve
Original wheeled suitcase included
Technical condition: used, functional more
Pneumatic chain hoist
Second-hand goods, see pictures
suitable for explosion areas
Manufacturer ATLAS COPCO
incl. trolley
0,5 tonnes
negotiation price: € 180,-- net ex stock
Goods are in stock.
Transport and assembly possible on request.
Visits possible at any time by appointment.
Htbbrcxp
Further information on request.
Constantly over 5000 running meters of pallet racking
from numerous manufacturers in stock.
(Changes and errors in the technical data, information
and prices and subject to pri... more
For sale is an electric chain hoist from ABUS
Load capacity 2000 Kg
Bjbcxr7wlp
Load trains 2
lifting speed 6 m/min
Power 2,3 KW
The chain hoist can be inspected on site and its function tested. more
1982
used
Electric chain hoist, crane, hall crane, assembly crane, electric lift
-Bearing capacity 250 Kg
-Main lift 7.2 m / min
-fine lift 1.8 m / min
-Chain length 3 m
-2x cranes available
-Prize piece
-Dimensions 430/500 / H340 mm
Bctv0anmy
-Eigen weight 34 kg more
2013
used
Electric chain hoist, crane, hoist KONECRANES type XN 20 1608 B2
No.: 1302300238 Year of construction 2013
Load capacity 1600 kg
Hook path 10,5 meters
Main lifting speed approx. 8 m/min.
Fine lifting speed approx. 2 m/min.
Chain size 11,3 x 31 DAT
Engine power main hoist 3,5 KW
Motor power fine stroke 0,86 KW
Biiyidaytk
Power supply 400 Volt, 50 Hz
- 1 load line
very good condition, probably unused more
DEMAG
DKUN 10-1000 K V2 F4
400 V / 50 Hz
Hook path: 9.0 m
Chain / Chain: 7.4X21.2 8DK
Load capacity: 2 to
Year of construction / Year of Manufacture: 2006
IP 55
Bkvq387skp
used / used
Please note the photos
Please look at the pictures. Important!!!
Dimensions / Measurement: 120 x 80 x 60 cm
Gross weight / Gross weight: 150 kg
Int. no.: X356 more
