6
Ccz22srwmd
5
max. Druck 10 bar
Eqemqlt
Motor 5.5 kW
Liefermenge 10.45 l/s
Lagerort: Nattheim
1
55 kW, max. 13 bar, 9,72 m3/min. With built in frequency inverter. Volume flow 1,6 - 9,72 m3/min.
J0pgfqlsp
4
used rotray screw air compressor Atlas Copco GA55+, barely used, year of manufacture 2016, serial no. 55 kW, 400 V, 50 Hz, 9.75 bar, 9.36 cu. m/min, pressure tank zincked with mountings (3000 litres)
Qs7cl
15
Drive: Track
Empty weight: 17.300 kg
CE mark: yes
Serial number: AVO07A1076
Tesv7s3p
Comes with,
Cab, Atlas copco COP2550-CR89 10 hammer, Dust collector, auto rod
changer, airco
Engine hours: 14699
Drilling hours: 6820
- 17300 kg
- Drill diameter: 90-127
- Drilling depth: 30 M
12
General information
Field of application: Construction
Drivetrain
Make of engine: Caterpillar C18
Weights
Empty weight: 5.400 kg
Functional
Capacity: 43,2 m³/m
Condition
Technical condition: very good
Bryy0byq
Visual appearance: very good
Other information
Compressor type: Screw compressors
Transport dimensions (LxWxH): 3.95x2.2x2.3
Working pressure: 25 bar
Additional information
Please contact Sales Department for more information
2
A set of low used oil free air ends, LP & HP taken from compressor with run hours of 23000 hours, removed as part of the all inclusive cover
Pogtr
These units are good for 60000 - 80000 hours, I have test run, the intercooler pressure is 2.25bar on load and -0.6bar off load
1616 6770 81 HP Stage 0
1616 6722 81 Superseded by 1616 5851 81 Stage 1
4
ATLAS COPCO compressor model ZR-255-10, used, OIL FREE , in operation. AIR END repaired. Semi-new. Soundproofed, water cooled. Power: 55Kw, Year: 1.987, Flow rate: 7.800 l/min.
Tl8nswwg
12
Variable speed drive. Volume flow 1,45 - 10,63 m3/min. at 7,0 bar.
Cbeslzjc
4
Atlas Copco field bus unit 4240 0355 80 4240035580
Atlas Copco
Field bus unit
4240 0355 80;
Nn2lvlil
Article number 10140;
For inquiries please specify
7
A set of low hours used oil free air ends, LP & HP taken from compressor with run hours of 24000 hours, removed as part of the all inclusive cover These units are good for 60000 - 80000 hours, I have test run, the intercooler pressure is 2.2bar on load and -0.65bar off load
1616 6990 81 HP Superseded by 1616 7271 81
Y3bx3ejd
1616 6960 81 LP Superseded by 1616 7275 81
13
Oil-free, air cooled. Variable speed drive. Volume flow 2,5 - 8,55 m3/min. at 7,0 bar.
Yuanc
3
operating pressure: 13 bar
volume capacity: -
voltage: 230 V
air-pressure connection: Aus- und Eingang: 1" Zoll
7nkgtxinl
total power requirement: 0,54 kw
weight: ca. 52 kg
dimensions L x W x H: 0,8 x 0,4 x 1,0 m
- dehumidifying of compressed air
- working pressure air conditioning max. 35 bar
- refrigerant R 134 A
- heat exchanger
- size 320 x 180 x 315 mm
- fan dia. = 260
14
Metal slotting machine, slotter shaping
Model: Horizontal
Model:  Eccentric
Manufacturer:  Atlas
Type:  W650
Slotting speed: max.  70  m/min
Slotting range: max. 650mm
Table: 540x380mm
Height-adjustment:  400mm
Width-adjustment: 400mm
Qgqzd
Machine-Dimensions: 2500x1300x1500mm
4
Pneumatic cylinder, air cylinder, pneumatic stamp, air stamp, standard cylinder
2rnqya
-Stroke: 250 mm
-Piston diameter: 40 mm
-Piston rod: 16 mm
-Price: per piece
-Number: 2 pieces
-Dimensions: 410/55/H55 mm
-Weight: 1.5 kg/piece
15
Cagj3bge2w
4
Payload: 0 Kg Arm reach: 0.00 mmNumber of Axis: 0 Repeatability: 0.00 mm Robot weight: 0 Kg Mounting: Floor
Czcqdwj3
General information
Year of manufacture: 2010
Colour: Green
Field of application: Construction
Serial number: 5011230E108952
Technical information
Power: 54 kW (74 HP)
Mxdqg8
Number of cylinders: 4
Type of fuel: Diesel
Weights
Empty weight: 6.500 kg
Carrying capacity: 3.900 kg
GVW: 10.400 kg
Functional
CE mark: yes
Condition
Technical condition: good
Visual appearance: good
Offered for sale: Atlas 75S swing loader with 74hp Deutz engine. The pivoting boom makes it easy to unload material fr...
We sell
a used screw compressor Atlas Copco
INIMEX Ref: I000680
Type: GX 3 FF
Year of manufacture: 2016
Operating hours: 1.206 h
Power: 3 kW
Pressure: 10 bar
0ecdk
Sold without warranty and without liability for material defects
Shipping possible on request
The compressor is in very good condition and can be viewed and tested if interested and after prior appointment or watch the test video on Youtube, we take no responsibility and have no warranty after purchase.
12
Field of application: Construction
Djm8bar
Empty weight: 6.375 kg
Make of engine: Scania DC09 074A
Compressor type: Screw compressors
Transport dimensions (LxWxH): 4.5x2.14x2.54
Working pressure: 8.6 - 10.3 bar
Please contact Sales Department for more information
4
Pneumatic cylinders, air cylinders, pneumatic rams, air rams, standard cylinders, compact cylinders
-Stroke: 50 mm
-Piston diameter: 50 mm
-Piston rod: 16 mm
-Price: per piece
-Number: 2 pieces
-Dimensions: 100/65/H65 mm
-Weight: 0.75 kg/piece
H8k3iu7
5
7
Commission 5249-57
Load capacity 2600 kg
Drive type diesel
Mast type standard
Lifting height 2975 mm
Headroom 0 mm
Free lift 0 mm
X97w0efx
Forks 1000 mm
technically good
optically very good
tires_front 355 x 80 x 20 air
tires rear 355 x 80 x 20 air
special equipment 3rd valve, working light rear, working light front, heating, full cab weight 4700 kg
Attachments: quick coupler
3
Used trench hammer Atlas Copco LT6005
Year: 2017.
Inkxka9
Motor: Honda GXR120.
Gasoline.
Weight: 69 kg.
Prijs per stuk: € 1.000,-. ex VAT
12
Field of application: Construction
Empty weight: 6.375 kg
Hdwiowp3u
Make of engine: Scania DC09 074A
Compressor type: Screw compressors
Transport dimensions (LxWxH): 4.5x2.14x2.54
Working pressure: 8.6 - 14 bar
Please contact Sales Department for more information
5
Angle grinder, cutoff grinder
Bg83oyrvhx
-Grinding wheels: Ø 180 mm
-Power: 2100 W
-Speed: 8500 rpm
-Dimensions: 640/140/H240 mm
-Weight: 6 kg
10
ATLAS COPCO ZR 160 VSD FF screw compressor
ATLAS COPCO ZR 160 VSD FF screw compressor
Serial number: AIF 126273
Year of construction: 2007
Max. working pressure: 8,60 bar
Gc8tyomvk
400 V
144 kW
Operating hours: 80377
Dimensions: 3500 x 1650 x H 2000 mm
100 % oil-free compressed air
The ZR/ZT is characterised by absolutely clean air, which complies with the ISO 8573-1 CLASS 0 (2010) standard.
Class 0 means:
no risk of contamination, no risk of damaged products, no risk of loss due to downtime ...
General information
Field of application: Construction
Technical information
Power: 115 kW (157 HP)
Make of engine: TCD 4.1 L4
History
Number of owners: 1
Condition
General condition: good
Cauxhz8wdz
Technical condition: good
Visual appearance: good
Other information
EPA Marked: yes
Reconditioned: Yes
Front tyres / undercarriage remaining: 100
Output of the auxiliary hydraulics: 300 l/min
Dipper / stick length: 660.5 cm
Emission level: Stage IIIB / Tier IV interim
Delivery terms: EXW
Transpo...
10
Commission 6271-39
Load capacity 2600 kg
Drive type diesel
Mast type standard
Lifting height 3035 mm
Overall height 2796 mm
Free lift 0 mm
forks 0 mm
technically good
optically good
tires_front 405 x 70 x 20 air
tires rear 405 x 70x 20 air
Camrtxxzf7
special equipment 3rd valve, working lights in front, heating, full cabin
13
Field of application: Construction
Empty weight: 749 kg
Make of engine: Kubota V1505
Cbekxdcu2y
Capacity: 3,5 m³/m
Compressor type: Screw compressors
Working pressure: 7 bar
Please contact Sales Department for more information
5
Pneumatic cylinder, air cylinder, pneumatic stamp, air stamp, standard cylinder
Bub0ad2wri
-Manufacturer: Atlas Copco, standard cylinder type C4-200-40
-Stroke: 240 mm
-Piston rod: Ø 40 mm
-Number: 2x cylinders available
-Price: per piece
-Dimensions: 320/280/H470 mm
-Weight: 34 kg/piece
2
Nevers, France
(dealership location)