Used Spray Booth for sale (2,076)

Condition: good (used), VLM Type: V.745.672.120 Model CC 1000-FL HL Corrosion test chamber for salt spray tests Specifications: Test chamber volume: approx. 1000 L Test chamber dimensions (ΒχΤχΗ1/Η2): 1400x800x800/1020 mm Door opening dimensions (WxH): 1300x680 mm External housing dimensions втн: 2162 x 995 x 2080 mm Operating temperature range: 5°C > room temperature to +80°C High-load version for loads up to 350 kg Process control: Beckhoff PLC, color touch screen display display, 50 memory locations for test procedures, 50 Nodpjt Igc Ssfx Ah Howb Memory locations for test segments, ramps: Humidity-temperature over the entire working range, Ether connection Electrical connection: 400 V, 50 Hz, 5700 W Tap water: min. 2.5 bar Tap connection 3/4" External thread for connecting an ion exchanger cartridge Compressed air: 7-8 bar Waste water: Siphon / 30 mm ID hose nozzle Exhaust air: pipe end OD 75 mm Operating systems: Salt spray Condensation water (CWC) Ventilation Room air Warm air Controlled humidity

Condition: excellent (used), Type: SWT 200/400-S Nwedpfxoxg Hrke Ah Hob Weiss Spray and Splash Water Test Cabinet Used to test water ingress into enclosures. In combination with a timer, the test cycle can be automated with an adjustable test duration from 3 seconds to 30 hours. Complies with DIN VDE 0470 T1 and EN 60529 for tests according to protection classes IPX3 and IPX4. The integrated recirculation system reduces water consumption to a minimum. Features - Glass door with wiper - Pneumatic drive for the oscillating pipe - Adjustable oscillation angle - Interchangeable oscillating pipes - Swivel and interchangeable nozzle holders - Adjustable and measurable water flow rate - Test duration control Data for mechanical load: - Max. load with test specimens (evenly distributed): Permissible total weight for specimen carrier: 25 kg - Spray radius: 200 mm / 400 mm Data for IP protection class tests - Oscillation speed approx. 60°/s - Oscillation angle IPX3 approx. ±60° - Oscillation angle IPX4 approx. ±180° -10° Dimensions: - External dimensions with control cabinet (D x W x H): approx. 1000 x 1350 x 1900 mm - External dimensions (D x W x H): approx. 1000 x 1000 x 1900 mm - Internal dimensions (D x W x H): 400 x 650 x 750 mm Operating data: - Voltage: 3/N/PE AC 400V ±10% 50Hz - Rated power: 1.5 kW - Rated current: 6.0 A - Weight: 375 kg Important note: "The table shown in the photos is not included in the sale." Condition: used Scope of delivery: (See picture) (Technical data subject to change and errors excepted!) Further questions can be answered by phone.

Condition: used, Year of construction: 2016, Used Makor START ONE spray coating machine suitable for low-volume woodworking production. Designed for applying water-based or solvent-based paints and glues to veneered components and PVC panels. Ideal for companies moving from manual finishing to automatic spray coating. Equipped with PLC control system with intuitive interface and automatic panel detection to optimise paint usage. Features a self-cleaning paper transport system, reducing maintenance and downtime. Spraying unit includes an electronically controlled oscillating arm with capacity for up to 4 spray guns, 2 high-pressure feed circuits, and quick-change coupling system. Efficient air-flow and filtration system ensures clean operation and environmental compliance. Technical Data: • Feed speed: 1–4.5 m/min • Air capacity: 10,000 m³/h • Installed power: 7 kW Nwjdpfx Aox Iggyoh Hsb • Working height: approx. 900 mm

Condition: used, tank capacity: 8,000 l, GENERAL Equipment: Spray head, lifting lugs Design: vertical Remarks: Minor dents in insulation jacket; some small cracks in the weld seams of the feet (see photos); 1 tank with nameplate (the outlet end of this tank is cut off) Speed: 42 rpm Outer diameter: 2,100 mm Inner diameter: 2,000 mm Total height: 4,550 mm Insulation: present Power: 2.2 kW Agitator: Beam agitator Support type: Feet Nodpfx Ahoxqc Sze Hswb Location: Bremen Volume: 8,000 liters Product-contact material: V2A 1.4301 (AISI304) Condition: used Cylindrical height: 2,500 mm Previous application: Dairy TANK Number of feet: 3 pcs INSULATION Insulation jacket: hermetically welded Insulation jacket material: Stainless steel EQUIPMENT Manhole / dome: in top head Outlet: 65 mm MATERIAL SPECIFICATION Feet material: Stainless steel AGITATOR 1 Agitator arrangement: eccentric in top head Agitator features: Tanks with different impeller diameters; 1 tank with bottom bearing, the other tank without

Condition: excellent (used), Painting-finishing line with spraying machine, for panels, max working width mm 1300 Dimensions of the line: max lenght 48 meters (ca.) x max width 10 meters (ca.) Composed of the following machines: a) Motorized belt transfer "CEFLA" Mod. TB3500 b) "SORBINI" brushing machine Mod. SmartClean 33-F, with upper brushes + air blowers c) Motorized belt transfer "CEFLA" Mod. TB4000-2V/CT, with plexiglass closure Nedpfx Ajhbyr Sjh Howb d) Automatic Spraying machine - NC "CEFLA" Mod. iBotic RU1WP, with 4 spraying guns + 1 spraying gun for panel edges e) Motorised belt transfer "CEFLA" Mod. TB4000-2V/CT, with Plexiglas enclosure f) Vertical oven "CEFLA" Mod. PIEFFE VL 6/7400, with 6 trays max length 7000 mm g) Motorized belt transfer "CEFLA" Mod. TR4000-CT, with Plexiglas closure h) Pressurised drying booth "CEFLA" Mod. GPAU/30 (6 x 10 metres - Kw 22.5) i) Pressurised spray booth (6 x 6 metres) with recirculating water spray booth l) Pressurized sanding booth (with 2 suction benches)

Condition: used, Year of construction: 2008, functionality: fully functional, machine/vehicle number: IMBDS63-52-10-45-2/SP/DC/SB, workpiece weight (max.): 120 kg, working height: 2,850 mm, power: 35 kW (47.59 HP), air demand: 24,000 m³/h, compressed air connection: 6 bar, The existing window coating line was in full operation until December 19, 2025. The system is currently still connected to the electrical supply network but will be replaced by a new robotic coating system over the turn of the year. Nsdpfx Asx Npzcoh Hewb The objective is to find a suitable subsequent user who will professionally dismantle and remove the complete system on their own responsibility at the beginning of the coming year. System Concept Description Loading and unloading of traverses with window frames and sashes takes place via a lifting/lowering station, which allows for ergonomic and process-safe feeding of the system. Impregnation and priming of the workpieces is carried out in a vertical flooding booth. The coating application is performed using the flooding process via vertically arranged coating nozzles. This is followed by a drip-off and drying zone, where the traverses are guided in an inclined position. The first drying tunnel has a buffer capacity of approx. 40 traverses. Drying is achieved by means of warm air generated from a hot water system with a supply temperature of approx. 85°C. A switching unit enables workpieces to be routed either to a second impregnation/priming stage or directly to the subsequent coating section, as required. The coating section consists of a lifting stand with integrated electrostatic application (E-Statik). Coating is performed on one side only, supplemented by an automated turning unit, allowing workpieces to be returned to the spray system for a repeat coating pass. The second drying tunnel enables buffering of approx. 50 traverses. Here as well, drying is by warm air supplied by a hot water system at approx. 85°C. A buffer section after the second drying tunnel with a capacity of about 25 traverses serves as a transfer area to the unloading station.

Condition: new, SprayClean Front Loading Spray Washing Machines SprayClean systems are designed to clean parts automatically with pressurized hot water plus a biodegradable detergent. SprayClean machines are front loading systems and have tank heating insulation, vapour extraction and pneumatic control door as standard features. Rinsing and drying processes can also be added to this model meaning the whole process of washing, rinsing and drying can be completed in the same location. Multiple systems are controlled via PLC control in the main control panel. The SprayClean also comes with a large range of optional accessories from oil skimmers, oil separators, filtration units, tank discharge pumps, loading/unloading carts, cabin insulation and many more. Nodpfx Ahe T D R Ds Howb - Pneumatically powered vertical opening front access door - Heavy duty stainless steel mesh motor driven component basket - Integral fluid filtration system - Corrosion resistant spray jets - Chemical & corrosion resistant stainless steel pump - Microprocessor or PLC controlled - Electrical powered fluid heating - Optional double skinned fluid tanks with 20mm thick insulation

Condition: new, Year of construction: 2025, Dimensions (L/W/H) 1624x950x2345 mm Weight 0 kg Nwodpfxsvz El Ne Ah Hsb Total power requirement 1,5 kw

Condition: ready for operation (used), Year of construction: 2018, operating hours: 36,000 h, functionality: fully functional, machine/vehicle number: A1406010, feed length X-axis: 1,800 mm, feed length Y-axis: 350 mm, feed length Z-axis: 150 mm, feed rate X-axis: 40 m/min, workpiece weight (max.): 8 kg, working width: 200 mm, volume flow: 16,000 m³/h, control cabinet length: 3,200 mm, control cabinet width: 600 mm, type of input current: three-phase, control cabinet height: 2,200 mm, total height: 3,600 mm, total length: 21,000 mm, total width: 14,000 mm, Complete lacquering line for narrow elements. Magazine infeeder / brushing machine left; right; top / lacquering cabin / drying tunnel hot air; cold air; UV lamps / outfeeder. Line speed 40 m/min Production speed 25 m/min Spraying thickness 110 g/m² Waterborne lacquer Power 200 kW Nodpsx Nhawefx Ah Hjwb

Condition: used, Painting system consisting of: Pos.1 Venjakob belt conveyor - Manufacturer: Venjakob - Working width: 1,300 mm - Length: 3,000 mm - Feed adjustable via handwheel ~ 2.5 – 7.5 m/min - Volt, Hz: 400 / 50 - Colour RAL 7035 Pos.2 Cefla dust extraction machine - Manufacturer: Sorbini - Type: VS/32-E - Year of manufacture: 1998 - Working width: 1,300 mm - Working height: 900 mm + - 20 mm - Operating side: right - Roller conveyor - Air blowing channel, above 2 pcs. - Air blowing channel, below 1 pc. - Dust remover brush - With ionisation bar from above - With ionisation bar from below - With own drive - With own control - Length ~ 910 mm - Width ~ 2,600 mm - Weight 1,260 kg - Extraction nozzle D 180 + 120 mm - Total connection 7.6 kW - Volt, Hz 400/ 50 Pos.3 Venjakob VEN SRAY Perfect automatic spraying machine - Manufacturer Venjakob - Type. VEN SPRAY PERFECT - Year of construction 2013 - Working width 1,300 mm - Working height 940 + - 20 mm - Operating side left - IR preheating, number of radiators 2 pcs. - Duo-design spray gun drive - Dry suction - Diameter of suction nozzle 600 mm - Exhaust air capacity 10,000 m³/h - Belt transport system - feed speed infinitely variable ~ 4-10 m/min - conveyor belt cleaning system - paint recovery via V-belt system - gun control, EPS-CNC CNC 7000 - colour management system for number of pumps 3+1 pcs. - number of installed airless spray guns 4 pcs. - Quick-change system for spray guns - Remote maintenance system - Dust cover on the outlet side of the machine - Exhaust air recirculation system - Exhaust air control of the suction ventilator - Machine suitable for water-based paints - Machine suitable for solvent-based paints - Length 5,509 mm - Width 4,500 mm + 2,400 mm - Height 3,380 mm + 510 mm - Total connection ~ 20 - 26 kW - Volt, Hz 400/50 - Colour RAL 7035 - Kremlin AVX AirMix spray guns - Small parts container - gun support arm system for quick removal of 4 AirMix spray guns from the spray booth, including quick couplings for pneumatics and material hoses. Pos.4 Venjakob belt conveyor - manufactured by Venjakob - working width 1,300 mm - length 2,000 mm - feed adjustable via handwheel ~ 2.5 – 7.5 m/min - Volt, Hz 400 / 50 - Colour RAL 7035 Pos.5 Cefla high-level dryer - Manufacturer Cefla - Type VN 2000/5500/190.5/30 - Year of construction 2003 - Working width 1,300 mm - Number of pallets 30 pcs. - Pallet length 5,600 mm - Usable pallet length 5,300 mm - Load capacity per pallet 300 kg - Max. part height ~ 110 mm - Clearance between pallets 120 mm - Dimension: centre of pallet to centre of pallet 3,658 mm - Max. part length ~ 5,200 mm - Number of controllable temperature zones 2 pcs. - Supply air flow rate 6,000 m³/h - Exhaust air flow rate 6,000 m³/h - Heat output max. 175 kW - Max. drying temperature ~ 55 - 60 degrees Nodpov I Akvefx Ah Hswb - With heat exchanger, hot water - Without hot water control valves - U-shaped flow direction - Inlet side on the right - Feed speed via frequency converter control ~ 2-20 m/min - Suitable for water-based paints - Suitable for solvent-based paints - Length 7,820 mm mm - Width 6,130 mm - Height 3,905 mm - Total connection ~ 23 kW - Volt, Hz 400 / 50 - Voltage fluctuations max. +/- 5 % - Without control valves and water pumps Pos.6 Cefla belt conveyor - Manufacturer Cefla - working width 1.300 mm - length 2.000 mm - feed adjustable via handwheel ~ 2.5 – 7.5 m/min - volts, Hz 400 / 50 - colour RAL 7035

Year of construction: 2003, condition: used, functionality: fully functional, machine/vehicle number: 59 226 035 580 030, Type: SC/KWT 450 Salt Spray Chamber Technical Data: - Test chamber volume: 450 liters Nsdpfx Ahsx Ig Tmo Hewb - System weight: 140 kg (test chamber + machine unit; without brine and without test specimens) - Brine reservoir: 180 liters - Maximum load: 100 kg, 8 kg per support rod - External dimensions: Height without hood 920 mm, height with hood 1370 mm, width 1930 mm, depth 800 mm - Test chamber dimensions: Height 740 mm, width 850 mm, depth 570 mm - Control unit: Simcon/32 - Condition: used - Operating hours: 22,914 h Connection Data: - Voltage: 1/N/PE AC 230V ±10% 50Hz - Rated power: 2.0 kW - Rated current: 8.5 A - Power consumption: 450 Wh/h - Brine consumption: approx. 0.5–1 liter per hour - Compressed air consumption: approx. 1.5 m3/h at 0°C and 1 bar - Deionized water consumption: approx. 0.4 liters per hour Application Areas: - Salt spray test in accordance with DIN 50021 - Condensation water test in accordance with DIN 50017 - Standard climate (ventilation): DIN 50014 The system has been serviced and calibrated annually by the manufacturer, with no outstanding repairs (full maintenance contract). Last maintenance/calibration/DGUV3 inspection: 03/2025. The system will remain connected until week 3 and can be inspected during this time. All installation and operating manuals as well as the service manual are available.

Condition: like new (used), Year of construction: 2011, functionality: fully functional, type of input current: three-phase, input frequency: 50 Hz, temperature: 60 °C, load capacity: 250 kg, SUMMA DC3/OSK rotating basket, rotating drum cleaning equipment, Carousel degreasing machine with dryer. The chamber rotary machine of the Czech manufacturer operates on the principle of pressure spraying. The degreasing machine offers three surface cleaning combinations. The machine is suitable for surface degreasing of a wide range of materials. Manufacturer: SUMMA DC3/OSK Year of manufacture: 2011 Max. workpiece size: 770x500mm Max. workpiece weight: 250kg Electr. Power: 23kw Bath temperature: Max. 60°C Air temperature: Max. 120°C Bath (rinsing) heating: 12/6kw Drying air heating: 13.5kw Aerosol pressure: 0.28Mpa Pump performance: 70 liters/minute Njdpfswty H Dex Ah Hjwb Machine weight: 520kg Machine dimensions: 1800x1800mm Height: 1500mm If you need more information. We are here to help! Please contact us using the contact form or give us a call Your ad has been automatically translated. Translation errors are possible.

Condition: new, ⭐⭐⭐⭐⭐ (5.0) 42 ratings ✈️ 25 day delivery ✈️ ✅✅✅Energy class A+++✅✅✅ ⚡️ Top service ⚡️ Fast delivery ⚡️ Great support! PLUS VAT. & SHIPPING ►►Buy It Now◄◄ ✳️Keep your liquidity! We offer a variety of financing models to ensure your investment has the best chance of success. Contact us today to learn more about our hire-purchase, warranty or lease programs. ✳️ ➖➖➖➖➖ ►►►⌛⏰ FASTEST delivery time❗ ⌛⏰►►► ✨✨Buy directly from the manufacturer and secure the price and quality advantage!✨✨ Benefit from Proton's 40 years of experience in surface coating technologies. ➖➖➖➖➖ ☘️Eco-Friendly☘️⚡️Green Energy⚡️☘️ ⭐ Powder booth – BOOTHLINE1200 - FL ✔️ Internal dimensions: 1130 mm L * 1250 mm W * 1450 mm H ✔️ 2 Flanged polyester filter ✔️ Ø325*1000mm filter dimensions. ✔️ Automatic filter cleaning system (adjustable cleaning time) ✔️ Powder coating collection drawer ✔️ 360 degree rotatable and movable hanging device. ✔️ 1 PC 2.2 KW suction fan - 4500 m3/h ✔️Cab construction The powder booth is designed for manual application of the powder coating in an electrostatic field. The spray booth is made of powder-coated galvanized sheet iron. The interior and exterior of the cabin construction is coated with electrostatic powder paint [RAL 7024 MX - RAL 7047]. All parts of the powder booth are easily assembled with bolted connections and, if desired, easily disassembled. ✔️Suction system It is a system that prevents powder paint from leaking out of the booth and causing pollution when painting in the booth. The extraction system has been specially designed for each booth to ensure excellent extraction. Thanks to the suction system, the personnel applying powder coating are not affected by the paint. ✔️Filtration system The dust particles in the air extracted by the suction fans are held in the cab by fleece filters for long-lasting filtration, and filtered air is discharged from the exhaust stack. The filters separate the powder from the air by passing the powder/air mixture through the outside of the filter through a filter layer that keeps the dust and permeates the air. As filtration continues, dust accumulates outside the filter, increasing dust holding efficiency. The filter size is 330x1000, the surface is 9-10 m2. ✔️Powder recovery The powder paint applied in the booth is collected in the paint powder compartment at the bottom of the booth and can be reused manually. As an option, an automatic paint screen can be installed instead of the booth compartment. This screen collects the paint with the vibration motor from the booth and transfers it directly to the spray gun. ✔️Conveyor or suspension It can be integrated with bar transfer conveyor systems. In the models with eyelets, the product can be guided into the cabin with a suspension. Standard models feature a 360 degree rotating and articulating hanger. The price shown is for the smallest standard version. All devices/machines are new, not used. Nedpfx Ahjdhi Aao Hswb Do you want a special configuration ❗ Call us now❗

Condition: new, These units are manufactured from galvanized sheet and are designed to be fully screwed. This takes up very little space during shipment. Suction system is designed separately and specially for each booth so that the booth provides perfect suction. Thanks to the suction system, it is not possible for the personnel applying wet paint to be disturbed by the paint. In Elboy Wetline-KF Wet Paint Application Booths, environmental pollution is prevented by using accordion and cartridge or roll glass fiber filtration system. Wet paint particles vacuumed through suction fan in the air are caught by the accordion filter on the back of the booth. Wet paint particles in the trace amount which are not caught by the accordion filter are caught by the fiber filter on the back side. Nodpody Dv Dsfx Ah Hswb The door system can be fitted to the front door entrance in various ways. UV lights can be placed in the cabinet to check the painting process.

Condition: new, ⭐⭐⭐⭐⭐ (5.0) ⚡️ Top Service ⚡️ Fast Delivery ⚡️ Great Support! ✈️ Plus shipping costs – Shipping available upon request.✈️ Fast delivery: Only 4-6 weeks after receipt of payment! Important note: If you would like to receive a quote for an automatic powder coating system, please use the powder coating system configurator on the homepage of our website. ✅✅✅Energy Class A+++✅✅✅ ➖➖➖➖➖ ✳️Maintain your liquidity! We offer a variety of financing models to ensure your investment has the greatest chance of success. Contact us today to learn more about our hire purchase, warranty, or leasing programs. ➖➖➖➖➖ ✨✨Buy directly from the manufacturer and secure the price and quality advantage!✨✨ Benefit from Proton's 40 years of experience in surface coating technologies. ➖➖➖➖➖ ☘️Environmentally friendly☘️⚡️Green energy⚡️☘️ ► Optimal adhesion begins with perfect preparation – Chemical pretreatment systems from PROTON◄ Before the paint can develop its full potential, the surface must be flawless. PROTON surface pretreatment systems ensure that every contaminant – be it oil, dirt, or oxide – is reliably removed. This is the only way to achieve lasting corrosion resistance and excellent paint adhesion. Each product requires a customized process. Whether alkaline or acid degreasing, iron or zinc phosphating, nanotechnology, or chrome-free processes – we develop customized solutions for your requirements. Our pretreatment systems – whether spray or immersion systems – offer you: ✳️ Maximum energy efficiency ✳️ Minimized chemical and water consumption ✳️ Precise process control with automatic dosing and pH monitoring ✳️ Durable construction made of chemical-resistant stainless steel or plastic Our promise: Customized technology for the highest demands Our experienced project team analyzes your production conditions in detail and recommends the optimally matched pretreatment system. We consider all crucial parameters – from heating power and water circulation to vapor deposition and chemical separation. The spray wash lines are seamlessly integrated into your conveyor system. All cleaning, rinsing, and drying processes are fully automated and efficient – ready for a perfect coating. Available systems: ✳️ Spray and dip pretreatment lines ✳️ Nanotechnology systems (e.g., Bonderite, Oxsilan) ✳️ Degreasing and pickling systems ✳️ Iron and zinc phosphating lines ✳️ Chromating and chrome-free systems PROTON – Technology that convinces. Experience that works. Nwsdpfx Ahokwct Us Hsb ⭐Follow us for new campaigns⭐ ☀️ 2-YEAR WARRANTY ☀️ ☀️We have CE certificates for all our machines and ATEX certificates for the necessary machines.☀️

Condition: new, total height: 3,500 mm, total length: 7,000 mm, total width: 4,000 mm, volume flow: 26,000 m³/h, warranty duration: 12 months, inner dimension height: 2,700 mm, inner dimension length: 6,900 mm, inner dimension width: 3,900 mm, working height: 2,700 mm, Equipment: cabin, documentation/manual, ⭐⭐⭐⭐⭐ (5.0) Customer Rating – Quality that impresses! ⚡ Top Service – Fast Delivery – Reliable Support ⚡ ✈️ Plus shipping costs – Shipping available upon request ⏰ 48H EXPRESS DELIVERY available after a deposit! Regular delivery time varies between 1 business day and approximately 15 weeks depending on stock. 🔧 Please note: Additional options may extend delivery time. 📩 Ask the seller in advance whether your selected options are immediately available. 🛒 ►►► Buy now! ◄◄◄ 💸 Preserve liquidity – invest wisely! ✳️ We offer flexible financing options: ✔️ Hire Purchase ✔️ Leasing ✔️ Warranty Programs 📞 Contact us – we'll find the right solution for your budget! ✨ Powerful. Economical. Efficient. ✨ 📦 Immediately available in three standard sizes! 📌 Our three standard booth sizes are usually in stock and available for short-term delivery. 📌 If larger painting areas are required, we can combine standard booths modularly to create customized solutions – tailored to your space and process requirements! 🎨 PROTON WETLINE KKF-40-70-35 Top-of-the-line wet paint booth & drying system 📐 Technical specifications (inside / outside): Length: 6900 mm / 7000 mm Width: 3900 mm / 4000 mm Height: 2700 mm / 3500 mm Air treatment box: 1350 x 2900 mm 🔧 Features: 🌬️ Vertical airflow via full-surface ceiling supply air plenum – for even, dust-free painting 🚪 3-wing main door with viewing windows + service door with emergency locking in case of overpressure 💡 Shadow-free lighting, heat-resistant and compliant with standards ♻️ Recirculation system with controllable fresh air flap – rapid heating to 60–80°C 8–15 min 🔇 Low-noise, high-performance fans with constant airflow (0.30 m/s) 🛡️ Slight overpressure reliably protects against dust ingress 🔥 Heating system & efficiency: Riello G20 burner Heating output: approx. 200,000 kcal/h Efficiency: up to 99% High-temperature heat exchanger made of special steel 🧼 Top-of-the-line filter technology: ✅ Pre-filter (tear-resistant, up to 100°C, DIN 53438-3 F1) ✅ Ceiling filter (EN 779: F5, polyester-coated) ✅ Floor filter (Paint Stop, G3, silicone-free) ✅ Activated carbon filter (DIN 24184, class G4) 🖥️ Intelligent control: Modern control panel for full control of ventilation, heating, lighting, and Safety – simple & compliant with standards 🖲️ Optionally available with touchscreen operation 🧱 Flexibly positioned air treatment units – can be mounted on the right, left, or rear of the cabin ➕ Optional equipment (for an additional charge): 🪟 Panoramic doors – fully glazed 🧱 Roof with additional insulation 🎨 Paint mixing station can be integrated 🌈 Color selection: Any RAL color possible (standard: blue, white, orange, red, gray) 💡 Explosion-proof lighting (Exproof) 🌪️ Explosion-proof fan (Exproof Fan) 🖥️ Touchscreen control ⚠️ Selecting optional equipment may extend delivery times. Please discuss your options with our sales team in advance. 🚧 Installation costs not included in the price. 📍 These depend on your location – we would be happy to provide you with a customized quote! ☀️ 2-YEAR WARRANTY – Better safe than sorry! ☀️ ⭐ Follow us for new offers & promotions! ⭐ Nwedpfxoipvule Ah Heb PROTON Maschinenbau GmbH – Your partner for professional painting technology with over 40 years of experience.

Condition: new, ⭐⭐⭐⭐⭐ (5.0) ⚡️ Top service ⚡️ Fast delivery ⚡️ Great support! ✈️ 12-Weeks delivery ✈️ ✅✅✅Energy class A+++✅✅✅ ✳️Keep your liquidity! We offer a variety of financing models to ensure your investment has the best chance of success. Contact us today to learn more about our hire-purchase, warranty or lease programs. ✳️ ➖➖➖➖➖ Njdpfx Ahjfggcws Howb ►►►⌛⏰ FASTEST delivery time❗ ⌛⏰◄◄◄ ✨✨Buy directly from the manufacturer and secure the price and quality advantage!✨✨ Benefit from Proton's 40 years of experience in surface coating technologies. ➖➖➖➖➖ ☀️ 2 YEAR WARRANTY ☀️ MULTI-TREAT SPRAY PRE TREATMENT MACHINE ✅Multi-Treat spray pre-treatment machine is used for surface treatment of materials to be painted. It provides the possibility of working up to 8 different chemicals with tanks in varying numbers according to the process. All tanks are made of 316 SS and isolated. According to the process steps, the number of tanks and how many tanks are heated are determined. ✅The heating inside the tank is provided by gas heat exchangers. The processes can be monitored, times and temperatures of all processes can be adjusted via the Plc touchscreen. ✅Any failures that may occur in the system can be observed from the electrical panel. ✅Automatic floats in tanks, stop the system automatically when there is not enough water or chemicals in the tanks and the amount of liquid is automatically supplied by transferring between the tanks and the system stays safe. ✅Under all tanks there is leakage pool. Leakage pool has made from 316 SS. Tanks are made of 316 Quality 2 mm Stainless Steel. The material is passed through penetration tests made of argon welded and sealed. The grids inside the tank prevent mud access to the pumps. ✅The cabin interior consists of sandwich panels 304 stainless steel and the exterior is made of powder coated sheetiron. ✅Panel thickness is 80mm. It comes from polyurethane filled stainless steel panels. PPT ring pipes and nozzles provide long life usage. ✅Thanks to the steam suction fan, vapor diffusion into the working area from the system is prevented. The washing machine doors are container type and they are sealed with silicone gaskets. ✅The movable washing platform in the cabin moves back and forth through the cabin to wash the materials. The hoses are carried by the mobile carrier system. There are separate pumps for every processes and 1 waste pump for discharging liquids from the tanks. Discharging pump will be connected to chemical discharging tank. ✅The machine floor is designed to be inclined towards the pool discharge area. ✅There are manual application liquid spray guns for every processes for manual usage. System has manual mode for pretreatment. Dripping time and process time can adjusted from the PLC panel and dripping time is valid for manual application.

Condition: used, Year of construction: 2018, functionality: fully functional, Punching machine, barely used, weight: 8500 kg. Lot includes steel cabinet with contents. Contents consist of tooling, spares and miscellaneous small parts. Nedpfx Asxzpvueh Hswb

Condition: excellent (used), Weiss Type: SWT 1000 – IPX9K Weiss Spray and Splash Water Test Chamber Description: Offered for sale is a WaterEvent SWT 1000 test chamber from Weiss Technik – ideal for standardized testing of enclosure or component water ingress protection (IP) classes. With optional features, testing according to IPX9K (high-pressure/steam jet), ISO 20653, and additional standards is possible. High-pressure/steam jet nozzles for IPX9K Jet nozzles for IPX5/6, among others, compliant with standards: ISO 20653, DIN EN 60529, SAE J 575, JIS D 0203, MIL-STD 810, EN 60068-2-18, IEC 60598-1. Nwsdpfxjxzprcj Ah Hjb Possible Protection Classes & Tests Depending on configuration, the SWT system covers a wide range of tests: Standard configuration: IPX3 / IPX4 tests (spraying and splashing water from all directions). Optionally: Higher protection classes up to IPX5 / IPX6 (jetting water), and – with corresponding high-pressure configuration – up to IPX9 and IPX9K. Tests are based on standards such as DIN EN 60529 (for IP protection levels) and ISO 20653 (e.g. for vehicle or outdoor applications) – depending on intended use. Typical Applications Typical application scenarios for such a test chamber include: • Electronic devices or enclosures intended for outdoor use or humid environments, such as outdoor lighting, control housing, assemblies, panels. • Components for vehicles or machines, especially those exposed to rain, splashing water, or high-pressure cleaning (e.g., construction machinery, e-bike or vehicle parts). • Batteries or electrical components requiring water ingress protection testing – e.g., automotive industry or e-mobility applications. Technical Data: Applicable protection classes: IPX3 / IPX4 Oscillating tube radius (for IPX3/4 tests): standard 200 mm (for SWT 1000), optionally up to 400 mm. Test chamber (interior): Internal dimensions: approx. 1,000 × 1,015 × 1,000 mm (W × H × D) Operation / Control: Web panel or GUI for test programming and control. Condition: used Scope of supply: (see photo) (Data subject to change and correction. Technical specifications may be updated without notice.) Further questions welcomed by phone.

Condition: good (used), Ceever Spraymaster Turning Spray Washer The Spraymaster series industrial washers are advanced solutions for spray cleaning small and medium-sized components with a capacity of up to 4000 kg. Thanks to a rotating table that ensures even wetting of the parts with the spray jet, these systems guarantee maximum surface treatment efficiency. Nsdpjx Ex Nzsfx Ah Hewb Inside the treatment chamber, a channel system with strategically positioned nozzles enables complete spray cleaning of all surfaces, thus optimizing chemical, mechanical, and thermal processes in a single operation. Manufacturer: Ceever Type: Spray Master Turning Machine No. Z 429 Load: 500 kg/batch Voltage: 380 volts Current: 90 A Connected load: 62 kW Find more items – new and used – in our shop! International shipping costs on request!

Condition: excellent (used), Weiss Type: SWT 200/400-S Weiss Spray and Splash Water Test Cabinet This equipment tests the ingress of water into housings. In conjunction with a timer, the test cycle can be automated for an adjustable test duration from 3 seconds up to 30 hours. According to DIN VDE 0470 T1 and EN 60529 for testing protection ratings IPX3 and IPX4. Thanks to the integrated recirculation system, water consumption can be minimized. Features: - Glass door with wiper - Pneumatic drive for the oscillating tube - Adjustable oscillation angle - Interchangeable oscillating tubes - Swivel and exchangeable nozzle holders - Adjustable and monitored water flow rate - Test duration control Mechanical Load Data: - Max. load with test object (evenly distributed over area) - Permissible test load weight for carrying rack (total): 25 kg - Spray radius: 200 mm / 400 mm Test Data for IP Protection Ratings: - Oscillation speed: approx. 60°/s - Oscillation angle for IPX3: approx. ±60° - Oscillation angle for IPX4: approx. ±180° to -10° Njdpfx Ahoxxuytj Howb Dimensions: - External dimensions with control cabinet (D x W x H): approx. 1000 x 1350 x 1900 mm - External (D x W x H): approx. 1000 x 1000 x 1900 mm - Internal dimensions (D x W x H): 400 x 650 x 750 mm Operating Data: - Voltage: 3/N/PE AC 400V ±10% 50 Hz - Rated power: 1.5 kW - Rated current: 5.0 A - Weight: 375 kg Important Note: "The table shown in the photos is not included in the sale." Condition: used Scope of delivery: (see pictures) (Specifications subject to change and errors excepted!) For further questions, please feel free to contact us by phone.

Condition: used, Year of construction: 2003, functionality: fully functional, GALATEK Paint / Spray booth used for spraying furniture parts. The size of the booth is approximately 3x2,2x1 m. Including suction see photos. It is possible to sell including pressure balancing technology (air suppy ceiling). For more information please contact me. Nedpou Au Elsfx Ah Howb

Year of construction: 1994, condition: good (used), Working area approx. 2-080 x 1,430 mm, lateral baffles right and left, Filter area approx. 1,800 x 1,300 mm, 2 rows of paper volume filters approx. 650 x 1,800 mm inside fine filter G4 approx. 1.350 x 2.000 mm, air capacity 4.500 m³/h, pressure max. 500 Pa, motor 1,1 kW / 1.400 rpm. Nwodpfxspvil To Ah Hob

Condition: ready for operation (used), machine/vehicle number: 89915, Drive = compressed air, Material/air ratio = 16:1, Material pressure max. 90 bar, Air inlet pressure 1 to 6 bar, 4 double strokes for 1 liter of material, Nedjiv Huwopfx Ah Hswb with gun type MX with double hose, unused since last service 01/20, condition as seen, ex stock Seevetal, subject to prior sale

Condition: used, Year of construction: 1994, functionality: fully functional, Listing for Machineseeker – Used CEFLA Painting Line (Fully Operational) For sale is a complete, fully operational paint booth machine dismantled from a used production line. Manufacturer: CEFLA – premium industrial equipment for professional coating applications. System Components: 1 pc. belt conveyor • Length: approx. 1,900 mm • Belt width: 1,400 mm • Conveyor speed: 1.7 – 10.7 m/min 1 pc. CEFLA EASY 2000 automatic spraying machine Condition: Used, fully functional Regularly serviced Immediately ready for use Nwjdpfx Aoxdwi Ish Heb Field of application: Ideal for industrial coating and drying processes, e.g. furniture or wood processing sectors. Other information: Viewing possible by appointment